diff options
Diffstat (limited to 'arch/arm/cpu/armv8/fsl-layerscape')
| -rw-r--r-- | arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 6 | ||||
| -rw-r--r-- | arch/arm/cpu/armv8/fsl-layerscape/Makefile | 2 | ||||
| -rw-r--r-- | arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 8 | ||||
| -rw-r--r-- | arch/arm/cpu/armv8/fsl-layerscape/doc/README.falcon | 16 | ||||
| -rw-r--r-- | arch/arm/cpu/armv8/fsl-layerscape/fdt.c | 9 | ||||
| -rw-r--r-- | arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c | 14 | ||||
| -rw-r--r-- | arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c | 287 | ||||
| -rw-r--r-- | arch/arm/cpu/armv8/fsl-layerscape/soc.c | 45 | ||||
| -rw-r--r-- | arch/arm/cpu/armv8/fsl-layerscape/spl.c | 3 |
9 files changed, 378 insertions, 12 deletions
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index 6c03dfb1d58..cefbdfe8556 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -1,6 +1,7 @@ config ARCH_LS1012A bool select ARMV8_SET_SMPEN + select ARM_ERRATA_855873 select FSL_LSCH2 select SYS_FSL_DDR_BE select SYS_FSL_MMDC @@ -16,6 +17,7 @@ config ARCH_LS1012A config ARCH_LS1043A bool select ARMV8_SET_SMPEN + select ARM_ERRATA_855873 select FSL_LSCH2 select SYS_FSL_DDR select SYS_FSL_DDR_BE @@ -68,6 +70,7 @@ config ARCH_LS1046A config ARCH_LS1088A bool select ARMV8_SET_SMPEN + select ARM_ERRATA_855873 select FSL_LSCH3 select SYS_FSL_DDR select SYS_FSL_DDR_LE @@ -493,8 +496,7 @@ config SYS_FSL_HAS_RGMII config SYS_MC_RSV_MEM_ALIGN hex "Management Complex reserved memory alignment" depends on RESV_RAM - default 0x20000000 if ARCH_LS2080A - default 0x70000000 if ARCH_LS1088A + default 0x20000000 if ARCH_LS2080A || ARCH_LS1088A help Reserved memory needs to be aligned for MC to use. Default value is 512MB. diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Makefile b/arch/arm/cpu/armv8/fsl-layerscape/Makefile index 115c3fc1d14..0cb6d4eb4df 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Makefile +++ b/arch/arm/cpu/armv8/fsl-layerscape/Makefile @@ -7,8 +7,10 @@ obj-y += cpu.o obj-y += lowlevel.o obj-y += soc.o +ifndef CONFIG_SPL_BUILD obj-$(CONFIG_MP) += mp.o obj-$(CONFIG_OF_LIBFDT) += fdt.o +endif obj-$(CONFIG_SPL) += spl.o obj-$(CONFIG_$(SPL_)FSL_LS_PPA) += ppa.o diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c index 00d2564c799..70a60709357 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c @@ -30,6 +30,7 @@ #endif #include <asm/arch/clock.h> #include <hwconfig.h> +#include <fsl_qbman.h> DECLARE_GLOBAL_DATA_PTR; @@ -565,6 +566,9 @@ int arch_early_init_r(void) #ifdef CONFIG_FMAN_ENET fman_enet_init(); #endif +#ifdef CONFIG_SYS_DPAA_QBMAN + setup_qbman_portals(); +#endif return 0; } @@ -574,7 +578,7 @@ int timer_init(void) #ifdef CONFIG_FSL_LSCH3 u32 __iomem *cltbenr = (u32 *)CONFIG_SYS_FSL_PMU_CLTBENR; #endif -#ifdef CONFIG_ARCH_LS2080A +#if defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LS1088A) u32 __iomem *pctbenr = (u32 *)FSL_PMU_PCTBENR_OFFSET; u32 svr_dev_id; #endif @@ -593,7 +597,7 @@ int timer_init(void) out_le32(cltbenr, 0xf); #endif -#ifdef CONFIG_ARCH_LS2080A +#if defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LS1088A) /* * In certain Layerscape SoCs, the clock for each core's * has an enable bit in the PMU Physical Core Time Base Enable diff --git a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.falcon b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.falcon index 2505f408ab0..a00b5bc9c35 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.falcon +++ b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.falcon @@ -86,7 +86,7 @@ Example: #address-cells = <1>; images { - kernel@1 { + kernel { description = "ARM64 Linux kernel"; data = /incbin/("./arch/arm64/boot/Image.gz"); type = "kernel"; @@ -96,7 +96,7 @@ Example: load = <0x80080000>; entry = <0x80080000>; }; - fdt@1 { + fdt-1 { description = "Flattened Device Tree blob"; data = /incbin/("./fsl-ls1043ardb-static.dtb"); type = "flat_dt"; @@ -104,7 +104,7 @@ Example: compression = "none"; load = <0x90000000>; }; - ramdisk@1 { + ramdisk { description = "LS1043 Ramdisk"; data = /incbin/("./rootfs.cpio.gz"); type = "ramdisk"; @@ -116,12 +116,12 @@ Example: }; configurations { - default = "config@1"; - config@1 { + default = "config-1"; + config-1 { description = "Boot Linux kernel"; - kernel = "kernel@1"; - fdt = "fdt@1"; - ramdisk = "ramdisk@1"; + kernel = "kernel"; + fdt = "fdt-1"; + ramdisk = "ramdisk"; loadables = "fdt", "ramdisk"; }; }; diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c index 39ffe1ab4d5..80af3188220 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c @@ -26,6 +26,8 @@ #ifdef CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT #include <asm/armv8/sec_firmware.h> #endif +#include <asm/arch/speed.h> +#include <fsl_qbman.h> int fdt_fixup_phy_connection(void *blob, int offset, phy_interface_t phyc) { @@ -442,6 +444,13 @@ void ft_cpu_setup(void *blob, bd_t *bd) fdt_fixup_esdhc(blob, bd); #endif +#ifdef CONFIG_SYS_DPAA_QBMAN + fdt_fixup_bportals(blob); + fdt_fixup_qportals(blob); + do_fixup_by_compat_u32(blob, "fsl,qman", + "clock-frequency", get_qman_freq(), 1); +#endif + #ifdef CONFIG_SYS_DPAA_FMAN fdt_fixup_fman_firmware(blob); #endif diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c index 2d7775e54f4..5f23aadc2c4 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c @@ -155,8 +155,22 @@ void get_sys_info(struct sys_info *sys_info) sys_info->freq_localbus = sys_info->freq_systembus / CONFIG_SYS_FSL_IFC_CLK_DIV; #endif +#ifdef CONFIG_SYS_DPAA_QBMAN + sys_info->freq_qman = sys_info->freq_systembus; +#endif } +#ifdef CONFIG_SYS_DPAA_QBMAN +unsigned long get_qman_freq(void) +{ + struct sys_info sys_info; + + get_sys_info(&sys_info); + + return sys_info.freq_qman; +} +#endif + int get_clocks(void) { struct sys_info sys_info; diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c index 179cac6e493..9ee0dd23e9c 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c @@ -158,6 +158,293 @@ void serdes_init(u32 sd, u32 sd_addr, u32 rcwsr, u32 sd_prctl_mask, serdes_prtcl_map[NONE] = 1; } +__weak int get_serdes_volt(void) +{ + return -1; +} + +__weak int set_serdes_volt(int svdd) +{ + return -1; +} + +#define LNAGCR0_RT_RSTB 0x00600000 + +#define RSTCTL_RESET_MASK 0x000000E0 + +#define RSTCTL_RSTREQ 0x80000000 +#define RSTCTL_RST_DONE 0x40000000 +#define RSTCTL_RSTERR 0x20000000 + +#define RSTCTL_SDEN 0x00000020 +#define RSTCTL_SDRST_B 0x00000040 +#define RSTCTL_PLLRST_B 0x00000080 + +#define TCALCR_CALRST_B 0x08000000 + +struct serdes_prctl_info { + u32 id; + u32 mask; + u32 shift; +}; + +struct serdes_prctl_info srds_prctl_info[] = { +#ifdef CONFIG_SYS_FSL_SRDS_1 + {.id = 1, + .mask = FSL_CHASSIS3_SRDS1_PRTCL_MASK, + .shift = FSL_CHASSIS3_SRDS1_PRTCL_SHIFT + }, + +#endif +#ifdef CONFIG_SYS_FSL_SRDS_2 + {.id = 2, + .mask = FSL_CHASSIS3_SRDS2_PRTCL_MASK, + .shift = FSL_CHASSIS3_SRDS2_PRTCL_SHIFT + }, +#endif + {} /* NULL ENTRY */ +}; + +static int get_serdes_prctl_info_idx(u32 serdes_id) +{ + int pos = 0; + struct serdes_prctl_info *srds_info; + + /* loop until NULL ENTRY defined by .id=0 */ + for (srds_info = srds_prctl_info; srds_info->id != 0; + srds_info++, pos++) { + if (srds_info->id == serdes_id) + return pos; + } + + return -1; +} + +static void do_enabled_lanes_reset(u32 serdes_id, u32 cfg, + struct ccsr_serdes __iomem *serdes_base, + bool cmplt) +{ + int i, pos; + u32 cfg_tmp; + + pos = get_serdes_prctl_info_idx(serdes_id); + if (pos == -1) { + printf("invalid serdes_id %d\n", serdes_id); + return; + } + + cfg_tmp = cfg & srds_prctl_info[pos].mask; + cfg_tmp >>= srds_prctl_info[pos].shift; + + for (i = 0; i < 4 && cfg_tmp & (0xf << (3 - i)); i++) { + if (cmplt) + setbits_le32(&serdes_base->lane[i].gcr0, + LNAGCR0_RT_RSTB); + else + clrbits_le32(&serdes_base->lane[i].gcr0, + LNAGCR0_RT_RSTB); + } +} + +static void do_pll_reset(u32 cfg, + struct ccsr_serdes __iomem *serdes_base) +{ + int i; + + for (i = 0; i < 2 && !(cfg & (0x1 << (1 - i))); i++) { + clrbits_le32(&serdes_base->bank[i].rstctl, + RSTCTL_RESET_MASK); + udelay(1); + + setbits_le32(&serdes_base->bank[i].rstctl, + RSTCTL_RSTREQ); + } + udelay(1); +} + +static void do_rx_tx_cal_reset(struct ccsr_serdes __iomem *serdes_base) +{ + clrbits_le32(&serdes_base->srdstcalcr, TCALCR_CALRST_B); + clrbits_le32(&serdes_base->srdstcalcr, TCALCR_CALRST_B); +} + +static void do_rx_tx_cal_reset_comp(u32 cfg, int i, + struct ccsr_serdes __iomem *serdes_base) +{ + if (!(cfg == 0x3 && i == 1)) { + udelay(1); + setbits_le32(&serdes_base->srdstcalcr, TCALCR_CALRST_B); + setbits_le32(&serdes_base->srdstcalcr, TCALCR_CALRST_B); + } + udelay(1); +} + +static void do_pll_reset_done(u32 cfg, + struct ccsr_serdes __iomem *serdes_base) +{ + int i; + u32 reg = 0; + + for (i = 0; i < 2; i++) { + reg = in_le32(&serdes_base->bank[i].pllcr0); + if (!(cfg & (0x1 << (1 - i))) && ((reg >> 23) & 0x1)) { + setbits_le32(&serdes_base->bank[i].rstctl, + RSTCTL_RST_DONE); + } + } +} + +static void do_serdes_enable(u32 cfg, + struct ccsr_serdes __iomem *serdes_base) +{ + int i; + + for (i = 0; i < 2 && !(cfg & (0x1 << (1 - i))); i++) { + setbits_le32(&serdes_base->bank[i].rstctl, RSTCTL_SDEN); + udelay(1); + + setbits_le32(&serdes_base->bank[i].rstctl, RSTCTL_PLLRST_B); + udelay(1); + /* Take the Rx/Tx calibration out of reset */ + do_rx_tx_cal_reset_comp(cfg, i, serdes_base); + } +} + +static void do_pll_lock(u32 cfg, + struct ccsr_serdes __iomem *serdes_base) +{ + int i; + u32 reg = 0; + + for (i = 0; i < 2 && !(cfg & (0x1 << (1 - i))); i++) { + /* if the PLL is not locked, set RST_ERR */ + reg = in_le32(&serdes_base->bank[i].pllcr0); + if (!((reg >> 23) & 0x1)) { + setbits_le32(&serdes_base->bank[i].rstctl, + RSTCTL_RSTERR); + } else { + udelay(1); + setbits_le32(&serdes_base->bank[i].rstctl, + RSTCTL_SDRST_B); + udelay(1); + } + } +} + +int setup_serdes_volt(u32 svdd) +{ + struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); + struct ccsr_serdes __iomem *serdes1_base = + (void *)CONFIG_SYS_FSL_LSCH3_SERDES_ADDR; + u32 cfg_rcwsrds1 = gur_in32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]); +#ifdef CONFIG_SYS_FSL_SRDS_2 + struct ccsr_serdes __iomem *serdes2_base = + (void *)(CONFIG_SYS_FSL_LSCH3_SERDES_ADDR + 0x10000); + u32 cfg_rcwsrds2 = gur_in32(&gur->rcwsr[FSL_CHASSIS3_SRDS2_REGSR - 1]); +#endif + u32 cfg_tmp; + int svdd_cur, svdd_tar; + int ret = 1; + + /* Only support switch SVDD to 900mV */ + if (svdd != 900) + return -EINVAL; + + /* Scale up to the LTC resolution is 1/4096V */ + svdd = (svdd * 4096) / 1000; + + svdd_tar = svdd; + svdd_cur = get_serdes_volt(); + if (svdd_cur < 0) + return -EINVAL; + + debug("%s: current SVDD: %x; target SVDD: %x\n", + __func__, svdd_cur, svdd_tar); + if (svdd_cur == svdd_tar) + return 0; + + /* Put the all enabled lanes in reset */ +#ifdef CONFIG_SYS_FSL_SRDS_1 + do_enabled_lanes_reset(1, cfg_rcwsrds1, serdes1_base, false); +#endif + +#ifdef CONFIG_SYS_FSL_SRDS_2 + do_enabled_lanes_reset(2, cfg_rcwsrds2, serdes2_base, false); +#endif + + /* Put the all enabled PLL in reset */ +#ifdef CONFIG_SYS_FSL_SRDS_1 + cfg_tmp = cfg_rcwsrds1 & 0x3; + do_pll_reset(cfg_tmp, serdes1_base); +#endif + +#ifdef CONFIG_SYS_FSL_SRDS_2 + cfg_tmp = cfg_rcwsrds1 & 0xC; + cfg_tmp >>= 2; + do_pll_reset(cfg_tmp, serdes2_base); +#endif + + /* Put the Rx/Tx calibration into reset */ +#ifdef CONFIG_SYS_FSL_SRDS_1 + do_rx_tx_cal_reset(serdes1_base); +#endif + +#ifdef CONFIG_SYS_FSL_SRDS_2 + do_rx_tx_cal_reset(serdes2_base); +#endif + + ret = set_serdes_volt(svdd); + if (ret < 0) { + printf("could not change SVDD\n"); + ret = -1; + } + + /* For each PLL that’s not disabled via RCW enable the SERDES */ +#ifdef CONFIG_SYS_FSL_SRDS_1 + cfg_tmp = cfg_rcwsrds1 & 0x3; + do_serdes_enable(cfg_tmp, serdes1_base); +#endif +#ifdef CONFIG_SYS_FSL_SRDS_2 + cfg_tmp = cfg_rcwsrds1 & 0xC; + cfg_tmp >>= 2; + do_serdes_enable(cfg_tmp, serdes2_base); +#endif + + /* Wait for at at least 625us, ensure the PLLs being reset are locked */ + udelay(800); + +#ifdef CONFIG_SYS_FSL_SRDS_1 + cfg_tmp = cfg_rcwsrds1 & 0x3; + do_pll_lock(cfg_tmp, serdes1_base); +#endif + +#ifdef CONFIG_SYS_FSL_SRDS_2 + cfg_tmp = cfg_rcwsrds1 & 0xC; + cfg_tmp >>= 2; + do_pll_lock(cfg_tmp, serdes2_base); +#endif + /* Take the all enabled lanes out of reset */ +#ifdef CONFIG_SYS_FSL_SRDS_1 + do_enabled_lanes_reset(1, cfg_rcwsrds1, serdes1_base, true); +#endif +#ifdef CONFIG_SYS_FSL_SRDS_2 + do_enabled_lanes_reset(2, cfg_rcwsrds2, serdes2_base, true); +#endif + + /* For each PLL being reset, and achieved PLL lock set RST_DONE */ +#ifdef CONFIG_SYS_FSL_SRDS_1 + cfg_tmp = cfg_rcwsrds1 & 0x3; + do_pll_reset_done(cfg_tmp, serdes1_base); +#endif +#ifdef CONFIG_SYS_FSL_SRDS_2 + cfg_tmp = cfg_rcwsrds1 & 0xC; + cfg_tmp >>= 2; + do_pll_reset_done(cfg_tmp, serdes2_base); +#endif + + return ret; +} + void fsl_serdes_init(void) { #if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD) diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c index ae57c0e31d7..b9f837d58d3 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c @@ -341,6 +341,8 @@ int sata_init(void) #ifdef CONFIG_SYS_SATA2 ccsr_ahci = (void *)CONFIG_SYS_SATA2; out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG); + out_le32(&ccsr_ahci->pp2c, AHCI_PORT_PHY2_CFG); + out_le32(&ccsr_ahci->pp3c, AHCI_PORT_PHY3_CFG); out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG); out_le32(&ccsr_ahci->axicc, AHCI_PORT_AXICC_CFG); #endif @@ -348,6 +350,8 @@ int sata_init(void) #ifdef CONFIG_SYS_SATA1 ccsr_ahci = (void *)CONFIG_SYS_SATA1; out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG); + out_le32(&ccsr_ahci->pp2c, AHCI_PORT_PHY2_CFG); + out_le32(&ccsr_ahci->pp3c, AHCI_PORT_PHY3_CFG); out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG); out_le32(&ccsr_ahci->axicc, AHCI_PORT_AXICC_CFG); @@ -359,6 +363,45 @@ int sata_init(void) } #endif +/* Get VDD in the unit mV from voltage ID */ +int get_core_volt_from_fuse(void) +{ + struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); + int vdd; + u32 fusesr; + u8 vid; + + /* get the voltage ID from fuse status register */ + fusesr = in_le32(&gur->dcfg_fusesr); + debug("%s: fusesr = 0x%x\n", __func__, fusesr); + vid = (fusesr >> FSL_CHASSIS3_DCFG_FUSESR_ALTVID_SHIFT) & + FSL_CHASSIS3_DCFG_FUSESR_ALTVID_MASK; + if ((vid == 0) || (vid == FSL_CHASSIS3_DCFG_FUSESR_ALTVID_MASK)) { + vid = (fusesr >> FSL_CHASSIS3_DCFG_FUSESR_VID_SHIFT) & + FSL_CHASSIS3_DCFG_FUSESR_VID_MASK; + } + debug("%s: VID = 0x%x\n", __func__, vid); + switch (vid) { + case 0x00: /* VID isn't supported */ + vdd = -EINVAL; + debug("%s: The VID feature is not supported\n", __func__); + break; + case 0x08: /* 0.9V silicon */ + vdd = 900; + break; + case 0x10: /* 1.0V silicon */ + vdd = 1000; + break; + default: /* Other core voltage */ + vdd = -EINVAL; + debug("%s: The VID(%x) isn't supported\n", __func__, vid); + break; + } + debug("%s: The required minimum volt of CORE is %dmV\n", __func__, vdd); + + return vdd; +} + #elif defined(CONFIG_FSL_LSCH2) #ifdef CONFIG_SCSI_AHCI_PLAT int sata_init(void) @@ -368,6 +411,8 @@ int sata_init(void) /* Disable SATA ECC */ out_le32((void *)CONFIG_SYS_DCSR_DCFG_ADDR + 0x520, 0x80000000); out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG); + out_le32(&ccsr_ahci->pp2c, AHCI_PORT_PHY2_CFG); + out_le32(&ccsr_ahci->pp3c, AHCI_PORT_PHY3_CFG); out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG); out_le32(&ccsr_ahci->axicc, AHCI_PORT_AXICC_CFG); diff --git a/arch/arm/cpu/armv8/fsl-layerscape/spl.c b/arch/arm/cpu/armv8/fsl-layerscape/spl.c index 1c694e7c67d..4093d15e569 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/spl.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/spl.c @@ -85,6 +85,9 @@ void board_init_f(ulong dummy) #ifdef CONFIG_SPL_I2C_SUPPORT i2c_init_all(); #endif +#ifdef CONFIG_VID + init_func_vid(); +#endif dram_init(); #ifdef CONFIG_SPL_FSL_LS_PPA #ifndef CONFIG_SYS_MEM_RESERVE_SECURE |