diff options
Diffstat (limited to 'arch/arm/cpu')
| -rw-r--r-- | arch/arm/cpu/arm926ejs/at91/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c | 56 | ||||
| -rw-r--r-- | arch/arm/cpu/arm926ejs/at91/eflash.c | 271 | ||||
| -rw-r--r-- | arch/arm/cpu/arm926ejs/at91/reset.c | 21 | ||||
| -rw-r--r-- | arch/arm/cpu/arm926ejs/at91/timer.c | 5 |
5 files changed, 330 insertions, 24 deletions
diff --git a/arch/arm/cpu/arm926ejs/at91/Makefile b/arch/arm/cpu/arm926ejs/at91/Makefile index 4f467be91c2..def3980b634 100644 --- a/arch/arm/cpu/arm926ejs/at91/Makefile +++ b/arch/arm/cpu/arm926ejs/at91/Makefile @@ -34,6 +34,7 @@ COBJS-$(CONFIG_AT91SAM9263) += at91sam9263_devices.o COBJS-$(CONFIG_AT91SAM9RL) += at91sam9rl_devices.o COBJS-$(CONFIG_AT91SAM9M10G45) += at91sam9m10g45_devices.o COBJS-$(CONFIG_AT91SAM9G45) += at91sam9m10g45_devices.o +COBJS-$(CONFIG_AT91_EFLASH) += eflash.o COBJS-$(CONFIG_AT91_LED) += led.o COBJS-y += clock.o COBJS-y += cpu.o diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c index 77d49ab1c76..87b04426b9b 100644 --- a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c +++ b/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c @@ -28,12 +28,27 @@ #include <asm/arch/gpio.h> #include <asm/arch/io.h> +/* + * if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all + * peripheral pins. Good to have if hardware is soldered optionally + * or in case of SPI no slave is selected. Avoid lines to float + * needlessly. Use a short local PUP define. + * + * Due to errata "TXD floats when CTS is inactive" pullups are always + * on for TXD pins. + */ +#ifdef CONFIG_AT91_GPIO_PULLUP +# define PUP CONFIG_AT91_GPIO_PULLUP +#else +# define PUP 0 +#endif + void at91_serial0_hw_init(void) { at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; at91_set_a_periph(AT91_PIO_PORTB, 4, 1); /* TXD0 */ - at91_set_a_periph(AT91_PIO_PORTB, 5, 0); /* RXD0 */ + at91_set_a_periph(AT91_PIO_PORTB, 5, PUP); /* RXD0 */ writel(1 << AT91SAM9260_ID_US0, &pmc->pcer); } @@ -42,7 +57,7 @@ void at91_serial1_hw_init(void) at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; at91_set_a_periph(AT91_PIO_PORTB, 6, 1); /* TXD1 */ - at91_set_a_periph(AT91_PIO_PORTB, 7, 0); /* RXD1 */ + at91_set_a_periph(AT91_PIO_PORTB, 7, PUP); /* RXD1 */ writel(1 << AT91SAM9260_ID_US1, &pmc->pcer); } @@ -51,7 +66,7 @@ void at91_serial2_hw_init(void) at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; at91_set_a_periph(AT91_PIO_PORTB, 8, 1); /* TXD2 */ - at91_set_a_periph(AT91_PIO_PORTB, 9, 0); /* RXD2 */ + at91_set_a_periph(AT91_PIO_PORTB, 9, PUP); /* RXD2 */ writel(1 << AT91SAM9260_ID_US2, &pmc->pcer); } @@ -59,7 +74,7 @@ void at91_serial3_hw_init(void) { at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; - at91_set_a_periph(AT91_PIO_PORTB, 14, 0); /* DRXD */ + at91_set_a_periph(AT91_PIO_PORTB, 14, PUP); /* DRXD */ at91_set_a_periph(AT91_PIO_PORTB, 15, 1); /* DTXD */ writel(1 << AT91_ID_SYS, &pmc->pcer); } @@ -88,9 +103,9 @@ void at91_spi0_hw_init(unsigned long cs_mask) { at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; - at91_set_a_periph(AT91_PIO_PORTA, 0, 0); /* SPI0_MISO */ - at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* SPI0_MOSI */ - at91_set_a_periph(AT91_PIO_PORTA, 2, 0); /* SPI0_SPCK */ + at91_set_a_periph(AT91_PIO_PORTA, 0, PUP); /* SPI0_MISO */ + at91_set_a_periph(AT91_PIO_PORTA, 1, PUP); /* SPI0_MOSI */ + at91_set_a_periph(AT91_PIO_PORTA, 2, PUP); /* SPI0_SPCK */ /* Enable clock */ writel(1 << AT91SAM9260_ID_SPI0, &pmc->pcer); @@ -125,9 +140,9 @@ void at91_spi1_hw_init(unsigned long cs_mask) { at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; - at91_set_a_periph(AT91_PIO_PORTB, 0, 0); /* SPI1_MISO */ - at91_set_a_periph(AT91_PIO_PORTB, 1, 0); /* SPI1_MOSI */ - at91_set_a_periph(AT91_PIO_PORTB, 2, 0); /* SPI1_SPCK */ + at91_set_a_periph(AT91_PIO_PORTB, 0, PUP); /* SPI1_MISO */ + at91_set_a_periph(AT91_PIO_PORTB, 1, PUP); /* SPI1_MOSI */ + at91_set_a_periph(AT91_PIO_PORTB, 2, PUP); /* SPI1_SPCK */ /* Enable clock */ writel(1 << AT91SAM9260_ID_SPI1, &pmc->pcer); @@ -194,3 +209,24 @@ void at91_macb_hw_init(void) #endif } #endif + +#if defined(CONFIG_ATMEL_MCI) || defined(CONFIG_GENERIC_ATMEL_MCI) +void at91_mci_hw_init(void) +{ + at91_set_a_periph(AT91_PIO_PORTA, 8, 1); /* MCCK */ +#if defined(CONFIG_ATMEL_MCI_PORTB) + at91_set_b_periph(AT91_PIO_PORTA, 1, 1); /* MCCDB */ + at91_set_b_periph(AT91_PIO_PORTA, 0, 1); /* MCDB0 */ + at91_set_b_periph(AT91_PIO_PORTA, 5, 1); /* MCDB1 */ + at91_set_b_periph(AT91_PIO_PORTA, 4, 1); /* MCDB2 */ + at91_set_b_periph(AT91_PIO_PORTA, 3, 1); /* MCDB3 */ +#else + at91_set_a_periph(AT91_PIO_PORTA, 7, 1); /* MCCDA */ + at91_set_a_periph(AT91_PIO_PORTA, 6, 1); /* MCDA0 */ + at91_set_a_periph(AT91_PIO_PORTA, 9, 1); /* MCDA1 */ + at91_set_a_periph(AT91_PIO_PORTA, 10, 1); /* MCDA2 */ + at91_set_a_periph(AT91_PIO_PORTA, 11, 1); /* MCDA3 */ +#endif +} +#endif + diff --git a/arch/arm/cpu/arm926ejs/at91/eflash.c b/arch/arm/cpu/arm926ejs/at91/eflash.c new file mode 100644 index 00000000000..2e851dbd2c8 --- /dev/null +++ b/arch/arm/cpu/arm926ejs/at91/eflash.c @@ -0,0 +1,271 @@ +/* + * (C) Copyright 2010 + * Reinhard Meyer, EMK Elektronik, reinhard.meyer@emk-elektronik.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * this driver supports the enhanced embedded flash in the Atmel + * AT91SAM9XE devices with the following geometry: + * + * AT91SAM9XE128: 1 plane of 8 regions of 32 pages (total 256 pages) + * AT91SAM9XE256: 1 plane of 16 regions of 32 pages (total 512 pages) + * AT91SAM9XE512: 1 plane of 32 regions of 32 pages (total 1024 pages) + * (the exact geometry is read from the flash at runtime, so any + * future devices should already be covered) + * + * Regions can be write/erase protected. + * Whole (!) pages can be individually written with erase on the fly. + * Writing partial pages will corrupt the rest of the page. + * + * The flash is presented to u-boot with each region being a sector, + * having the following effects: + * Each sector can be hardware protected (protect on/off). + * Each page in a sector can be rewritten anytime. + * Since pages are erased when written, the "erase" does nothing. + * The first "CONFIG_EFLASH_PROTSECTORS" cannot be unprotected + * by u-Boot commands. + * + * Note: Redundant environment will not work in this flash since + * it does use partial page writes. Make sure the environent spans + * whole pages! + */ + +/* + * optional TODOs (nice to have features): + * + * make the driver coexist with other NOR flash drivers + * (use an index into flash_info[], requires work + * in those other drivers, too) + * Make the erase command fill the sectors with 0xff + * (if the flashes grow larger in the future and + * someone puts a jffs2 into them) + * do a read-modify-write for partially programmed pages + */ +#include <common.h> +#include <asm/arch/hardware.h> +#include <asm/arch/io.h> +#include <asm/arch/at91_common.h> +#include <asm/arch/at91_eefc.h> +#include <asm/arch/at91_dbu.h> + +/* checks to detect configuration errors */ +#if CONFIG_SYS_MAX_FLASH_BANKS!=1 +#error eflash: this driver can only handle 1 bank +#endif + +/* global structure */ +flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; +static u32 pagesize; + +unsigned long flash_init (void) +{ + at91_eefc_t *eefc = (at91_eefc_t *) 0xfffffa00; + at91_dbu_t *dbu = (at91_dbu_t *) 0xfffff200; + u32 id, size, nplanes, planesize, nlocks; + u32 addr, i, tmp=0; + + debug("eflash: init\n"); + + flash_info[0].flash_id = FLASH_UNKNOWN; + + /* check if its an AT91ARM9XE SoC */ + if ((readl(&dbu->cidr) & AT91_DBU_CID_ARCH_MASK) != AT91_DBU_CID_ARCH_9XExx) { + puts("eflash: not an AT91SAM9XE\n"); + return 0; + } + + /* now query the eflash for its structure */ + writel(AT91_EEFC_FCR_KEY | AT91_EEFC_FCR_FCMD_GETD, &eefc->fcr); + while ((readl(&eefc->fsr) & AT91_EEFC_FSR_FRDY) == 0) + ; + id = readl(&eefc->frr); /* word 0 */ + size = readl(&eefc->frr); /* word 1 */ + pagesize = readl(&eefc->frr); /* word 2 */ + nplanes = readl(&eefc->frr); /* word 3 */ + planesize = readl(&eefc->frr); /* word 4 */ + debug("id=%08x size=%u pagesize=%u planes=%u planesize=%u\n", + id, size, pagesize, nplanes, planesize); + for (i=1; i<nplanes; i++) { + tmp = readl(&eefc->frr); /* words 5..4+nplanes-1 */ + }; + nlocks = readl(&eefc->frr); /* word 4+nplanes */ + debug("nlocks=%u\n", nlocks); + /* since we are going to use the lock regions as sectors, check count */ + if (nlocks > CONFIG_SYS_MAX_FLASH_SECT) { + printf("eflash: number of lock regions(%u) "\ + "> CONFIG_SYS_MAX_FLASH_SECT. reducing...\n", + nlocks); + nlocks = CONFIG_SYS_MAX_FLASH_SECT; + } + flash_info[0].size = size; + flash_info[0].sector_count = nlocks; + flash_info[0].flash_id = id; + + addr = AT91SAM9XE_FLASH_BASE; + for (i=0; i<nlocks; i++) { + tmp = readl(&eefc->frr); /* words 4+nplanes+1.. */ + flash_info[0].start[i] = addr; + flash_info[0].protect[i] = 0; + addr += tmp; + }; + + /* now read the protection information for all regions */ + writel(AT91_EEFC_FCR_KEY | AT91_EEFC_FCR_FCMD_GLB, &eefc->fcr); + while ((readl(&eefc->fsr) & AT91_EEFC_FSR_FRDY) == 0) + ; + for (i=0; i<flash_info[0].sector_count; i++) { + if (i%32 == 0) + tmp = readl(&eefc->frr); + flash_info[0].protect[i] = (tmp >> (i%32)) & 1; +#if defined(CONFIG_EFLASH_PROTSECTORS) + if (i < CONFIG_EFLASH_PROTSECTORS) + flash_info[0].protect[i] = 1; +#endif + } + + return size; +} + +void flash_print_info (flash_info_t *info) +{ + int i; + + puts("AT91SAM9XE embedded flash\n Size: "); + print_size(info->size, " in "); + printf("%d Sectors\n", info->sector_count); + + printf(" Sector Start Addresses:"); + for (i=0; i<info->sector_count; ++i) { + if ((i % 5) == 0) + printf("\n "); + printf(" %08lX%s", + info->start[i], + info->protect[i] ? " (RO)" : " " + ); + } + printf ("\n"); + return; +} + +int flash_real_protect (flash_info_t *info, long sector, int prot) +{ + at91_eefc_t *eefc = (at91_eefc_t *) 0xfffffa00; + u32 pagenum = (info->start[sector]-AT91SAM9XE_FLASH_BASE)/pagesize; + u32 i, tmp=0; + + debug("protect sector=%ld prot=%d\n", sector, prot); + +#if defined(CONFIG_EFLASH_PROTSECTORS) + if (sector < CONFIG_EFLASH_PROTSECTORS) { + if (!prot) { + printf("eflash: sector %lu cannot be unprotected\n", + sector); + } + return 1; /* return anyway, caller does not care for result */ + } +#endif + if (prot) { + writel(AT91_EEFC_FCR_KEY | AT91_EEFC_FCR_FCMD_SLB | + (pagenum << AT91_EEFC_FCR_FARG_SHIFT), &eefc->fcr); + } else { + writel(AT91_EEFC_FCR_KEY | AT91_EEFC_FCR_FCMD_CLB | + (pagenum << AT91_EEFC_FCR_FARG_SHIFT), &eefc->fcr); + } + while ((readl(&eefc->fsr) & AT91_EEFC_FSR_FRDY) == 0) + ; + /* now re-read the protection information for all regions */ + writel(AT91_EEFC_FCR_KEY | AT91_EEFC_FCR_FCMD_GLB, &eefc->fcr); + while ((readl(&eefc->fsr) & AT91_EEFC_FSR_FRDY) == 0) + ; + for (i=0; i<info->sector_count; i++) { + if (i%32 == 0) + tmp = readl(&eefc->frr); + info->protect[i] = (tmp >> (i%32)) & 1; + } + return 0; +} + +static u32 erase_write_page (u32 pagenum) +{ + at91_eefc_t *eefc = (at91_eefc_t *) 0xfffffa00; + + debug("erase+write page=%u\n", pagenum); + + /* give erase and write page command */ + writel(AT91_EEFC_FCR_KEY | AT91_EEFC_FCR_FCMD_EWP | + (pagenum << AT91_EEFC_FCR_FARG_SHIFT), &eefc->fcr); + while ((readl(&eefc->fsr) & AT91_EEFC_FSR_FRDY) == 0) + ; + /* return status */ + return readl(&eefc->fsr) + & (AT91_EEFC_FSR_FCMDE | AT91_EEFC_FSR_FLOCKE); +} + +int flash_erase (flash_info_t *info, int s_first, int s_last) +{ + debug("erase first=%d last=%d\n", s_first, s_last); + puts("this flash does not need and support erasing!\n"); + return 0; +} + +/* + * Copy memory to flash, returns: + * 0 - OK + * 1 - write timeout + */ + +int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) +{ + u32 pagenum; + u32 *src32, *dst32; + u32 i; + + debug("write src=%08lx addr=%08lx cnt=%lx\n", + (ulong)src, addr, cnt); + + /* REQUIRE addr to be on a page start, abort if not */ + if (addr % pagesize) { + printf ("eflash: start %08lx is not on page start\n"\ + " write aborted\n", addr); + return 1; + } + + /* now start copying data */ + pagenum = (addr-AT91SAM9XE_FLASH_BASE)/pagesize; + src32 = (u32 *) src; + dst32 = (u32 *) addr; + while (cnt > 0) { + i = pagesize / 4; + /* fill page buffer */ + while (i--) + *dst32++ = *src32++; + /* write page */ + if (erase_write_page(pagenum)) + return 1; + pagenum++; + if (cnt > pagesize) + cnt -= pagesize; + else + cnt = 0; + } + return 0; +} + diff --git a/arch/arm/cpu/arm926ejs/at91/reset.c b/arch/arm/cpu/arm926ejs/at91/reset.c index 1b67e77887f..d2569d8baea 100644 --- a/arch/arm/cpu/arm926ejs/at91/reset.c +++ b/arch/arm/cpu/arm926ejs/at91/reset.c @@ -27,18 +27,19 @@ #include <asm/arch/at91_rstc.h> #include <asm/arch/io.h> -/* - * Reset the cpu by setting up the watchdog timer and let him time out. - */ +/* Reset the cpu by telling the reset controller to do so */ void reset_cpu(ulong ignored) { at91_rstc_t *rstc = (at91_rstc_t *) AT91_RSTC_BASE; - /* this is the way Linux does it */ - - writel(AT91_RSTC_KEY | AT91_RSTC_CR_PROCRST | AT91_RSTC_CR_PERRST, - &rstc->cr); - - while (1); - /* Never reached */ + writel(AT91_RSTC_KEY + | AT91_RSTC_CR_PROCRST /* Processor Reset */ + | AT91_RSTC_CR_PERRST /* Peripheral Reset */ +#ifdef CONFIG_AT91RESET_EXTRST + | AT91_RSTC_CR_EXTRST /* External Reset (assert nRST pin) */ +#endif + , &rstc->cr); + /* never reached */ + while (1) + ; } diff --git a/arch/arm/cpu/arm926ejs/at91/timer.c b/arch/arm/cpu/arm926ejs/at91/timer.c index d21eebfb4eb..8efc34bcf12 100644 --- a/arch/arm/cpu/arm926ejs/at91/timer.c +++ b/arch/arm/cpu/arm926ejs/at91/timer.c @@ -138,8 +138,5 @@ ulong get_timer(ulong base) */ ulong get_tbclk(void) { - ulong tbclk; - - tbclk = CONFIG_SYS_HZ; - return tbclk; + return timer_freq; } |