summaryrefslogtreecommitdiff
path: root/arch/arm/cpu
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/cpu')
-rw-r--r--arch/arm/cpu/arm1136/mx31/Makefile4
-rw-r--r--arch/arm/cpu/arm1136/mx31/relocate.S23
-rw-r--r--arch/arm/cpu/arm1136/mx35/Makefile4
-rw-r--r--arch/arm/cpu/arm1136/mx35/relocate.S23
-rw-r--r--arch/arm/cpu/armv7/mx6/soc.c29
-rw-r--r--arch/arm/cpu/armv7/omap3/Kconfig5
-rw-r--r--arch/arm/cpu/armv7/omap3/board.c11
-rw-r--r--arch/arm/cpu/pxa/cpuinfo.c17
8 files changed, 113 insertions, 3 deletions
diff --git a/arch/arm/cpu/arm1136/mx31/Makefile b/arch/arm/cpu/arm1136/mx31/Makefile
index 9670ed9382e..dcbd57065bb 100644
--- a/arch/arm/cpu/arm1136/mx31/Makefile
+++ b/arch/arm/cpu/arm1136/mx31/Makefile
@@ -8,3 +8,7 @@
obj-y += generic.o
obj-y += timer.o
obj-y += devices.o
+
+ifndef CONFIG_SPL_BUILD
+obj-y += relocate.o
+endif
diff --git a/arch/arm/cpu/arm1136/mx31/relocate.S b/arch/arm/cpu/arm1136/mx31/relocate.S
new file mode 100644
index 00000000000..1c556df71ba
--- /dev/null
+++ b/arch/arm/cpu/arm1136/mx31/relocate.S
@@ -0,0 +1,23 @@
+/*
+ * relocate - i.MX31-specific vector relocation
+ *
+ * Copyright (c) 2013 Albert ARIBAUD <albert.u.boot@aribaud.net>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <linux/linkage.h>
+
+/*
+ * The i.MX31 SoC is very specific with respect to exceptions: it
+ * does not provide RAM at the high vectors address (0xFFFF0000),
+ * thus only the low address (0x00000000) is useable; but that is
+ * in ROM, so let's avoid relocating the vectors.
+ */
+ .section .text.relocate_vectors,"ax",%progbits
+
+ENTRY(relocate_vectors)
+
+ bx lr
+
+ENDPROC(relocate_vectors)
diff --git a/arch/arm/cpu/arm1136/mx35/Makefile b/arch/arm/cpu/arm1136/mx35/Makefile
index c533215c3ac..796db9c7cc7 100644
--- a/arch/arm/cpu/arm1136/mx35/Makefile
+++ b/arch/arm/cpu/arm1136/mx35/Makefile
@@ -10,3 +10,7 @@
obj-y += generic.o
obj-y += timer.o
obj-y += mx35_sdram.o
+
+ifndef CONFIG_SPL_BUILD
+obj-y += relocate.o
+endif
diff --git a/arch/arm/cpu/arm1136/mx35/relocate.S b/arch/arm/cpu/arm1136/mx35/relocate.S
new file mode 100644
index 00000000000..43003f8044c
--- /dev/null
+++ b/arch/arm/cpu/arm1136/mx35/relocate.S
@@ -0,0 +1,23 @@
+/*
+ * relocate - i.MX35-specific vector relocation
+ *
+ * Copyright (c) 2013 Albert ARIBAUD <albert.u.boot@aribaud.net>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <linux/linkage.h>
+
+/*
+ * The i.MX35 SoC is very specific with respect to exceptions: it
+ * does not provide RAM at the high vectors address (0xFFFF0000),
+ * thus only the low address (0x00000000) is useable; but that is
+ * in ROM, so let's avoid relocating the vectors.
+ */
+ .section .text.relocate_vectors,"ax",%progbits
+
+ENTRY(relocate_vectors)
+
+ bx lr
+
+ENDPROC(relocate_vectors)
diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
index e599a12b3a5..ef029722b45 100644
--- a/arch/arm/cpu/armv7/mx6/soc.c
+++ b/arch/arm/cpu/armv7/mx6/soc.c
@@ -230,6 +230,11 @@ static void imx_set_wdog_powerdown(bool enable)
struct wdog_regs *wdog1 = (struct wdog_regs *)WDOG1_BASE_ADDR;
struct wdog_regs *wdog2 = (struct wdog_regs *)WDOG2_BASE_ADDR;
+#ifdef CONFIG_MX6SX
+ struct wdog_regs *wdog3 = (struct wdog_regs *)WDOG3_BASE_ADDR;
+ writew(enable, &wdog3->wmcr);
+#endif
+
/* Write to the PDE (Power Down Enable) bit */
writew(enable, &wdog1->wmcr);
writew(enable, &wdog2->wmcr);
@@ -255,6 +260,23 @@ static void clear_mmdc_ch_mask(void)
writel(0, &mxc_ccm->ccdr);
}
+static void init_bandgap(void)
+{
+ struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
+ /*
+ * Ensure the bandgap has stabilized.
+ */
+ while (!(readl(&anatop->ana_misc0) & 0x80))
+ ;
+ /*
+ * For best noise performance of the analog blocks using the
+ * outputs of the bandgap, the reftop_selfbiasoff bit should
+ * be set.
+ */
+ writel(BM_ANADIG_ANA_MISC0_REFTOP_SELBIASOFF, &anatop->ana_misc0_set);
+}
+
+
#ifdef CONFIG_MX6SL
static void set_preclk_from_osc(void)
{
@@ -275,6 +297,13 @@ int arch_cpu_init(void)
clear_mmdc_ch_mask();
/*
+ * Disable self-bias circuit in the analog bandap.
+ * The self-bias circuit is used by the bandgap during startup.
+ * This bit should be set after the bandgap has initialized.
+ */
+ init_bandgap();
+
+ /*
* When low freq boot is enabled, ROM will not set AHB
* freq, so we need to ensure AHB freq is 132MHz in such
* scenario.
diff --git a/arch/arm/cpu/armv7/omap3/Kconfig b/arch/arm/cpu/armv7/omap3/Kconfig
index 4a0ac2c987a..65da6e2c175 100644
--- a/arch/arm/cpu/armv7/omap3/Kconfig
+++ b/arch/arm/cpu/armv7/omap3/Kconfig
@@ -91,6 +91,10 @@ config TARGET_TWISTER
bool "Twister"
select SUPPORT_SPL
+config TARGET_OMAP3_CAIRO
+ bool "QUIPOS CAIRO"
+ select SUPPORT_SPL
+
endchoice
config DM
@@ -133,5 +137,6 @@ source "board/matrix_vision/mvblx/Kconfig"
source "board/nokia/rx51/Kconfig"
source "board/technexion/tao3530/Kconfig"
source "board/technexion/twister/Kconfig"
+source "board/quipos/cairo/Kconfig"
endif
diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c
index 347947c4b35..dd53b207f85 100644
--- a/arch/arm/cpu/armv7/omap3/board.c
+++ b/arch/arm/cpu/armv7/omap3/board.c
@@ -347,7 +347,16 @@ static int do_switch_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char * const arg
goto usage;
}
} else if (strncmp(argv[1], "sw", 2) == 0) {
- omap_nand_switch_ecc(0, 0);
+ if (argc == 2) {
+ omap_nand_switch_ecc(0, 1);
+ } else {
+ if (strncmp(argv[2], "hamming", 7) == 0)
+ omap_nand_switch_ecc(0, 1);
+ else if (strncmp(argv[2], "bch8", 4) == 0)
+ omap_nand_switch_ecc(0, 8);
+ else
+ goto usage;
+ }
} else {
goto usage;
}
diff --git a/arch/arm/cpu/pxa/cpuinfo.c b/arch/arm/cpu/pxa/cpuinfo.c
index 17d8be5b5b1..25de9e5fffb 100644
--- a/arch/arm/cpu/pxa/cpuinfo.c
+++ b/arch/arm/cpu/pxa/cpuinfo.c
@@ -46,6 +46,13 @@ int cpu_is_pxa27x(void)
return id == CPU_VALUE_PXA27X;
}
+int cpu_is_pxa27xm(void)
+{
+ uint32_t id = pxa_get_cpuid();
+ return ((id & CPU_MASK_PXA_PRODID) == CPU_VALUE_PXA27X) &&
+ ((id & CPU_MASK_PXA_REVID) == 8);
+}
+
uint32_t pxa_get_cpu_revision(void)
{
return pxa_get_cpuid() & CPU_MASK_PRODREV;
@@ -91,13 +98,17 @@ static const char *pxa27x_get_revision(void)
id = pxa_get_cpuid() & CPU_MASK_PXA_REVID;
- if ((id == 5) || (id == 6) || (id > 7))
+ if ((id == 5) || (id == 6) || (id > 8))
return unknown;
/* Cap the special PXA270 C5 case. */
if (id == 7)
id = 5;
+ /* Cap the special PXA270M A1 case. */
+ if (id == 8)
+ id = 1;
+
return rev[id];
}
@@ -107,7 +118,9 @@ static int print_cpuinfo_pxa2xx(void)
puts("Marvell PXA25x rev. ");
puts(pxa25x_get_revision());
} else if (cpu_is_pxa27x()) {
- puts("Marvell PXA27x rev. ");
+ puts("Marvell PXA27x");
+ if (cpu_is_pxa27xm()) puts("M");
+ puts(" rev. ");
puts(pxa27x_get_revision());
} else
return -EINVAL;
generated by cgit v1.2.3 (git 2.0.4) at 2025-10-15 11:28:51 +0000