diff options
Diffstat (limited to 'arch/arm/cpu')
23 files changed, 237 insertions, 119 deletions
diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c index 7d7725c4b83..0e6c0da1bdd 100644 --- a/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c +++ b/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c @@ -165,3 +165,20 @@ void at91_macb_hw_init(void) #endif } #endif + +#ifdef CONFIG_GENERIC_ATMEL_MCI +void at91_mci_hw_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 0, 0); /* MCI0 CLK */ + at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* MCI0 CDA */ + at91_set_a_periph(AT91_PIO_PORTA, 2, 0); /* MCI0 DA0 */ + at91_set_a_periph(AT91_PIO_PORTA, 3, 0); /* MCI0 DA1 */ + at91_set_a_periph(AT91_PIO_PORTA, 4, 0); /* MCI0 DA2 */ + at91_set_a_periph(AT91_PIO_PORTA, 5, 0); /* MCI0 DA3 */ + + /* Enable clock */ + writel(1 << ATMEL_ID_MCI0, &pmc->pcer); +} +#endif diff --git a/arch/arm/cpu/arm926ejs/kirkwood/cpu.c b/arch/arm/cpu/arm926ejs/kirkwood/cpu.c index d4711c070c3..da802400526 100644 --- a/arch/arm/cpu/arm926ejs/kirkwood/cpu.c +++ b/arch/arm/cpu/arm926ejs/kirkwood/cpu.c @@ -13,7 +13,6 @@ #include <asm/io.h> #include <asm/arch/cpu.h> #include <asm/arch/kirkwood.h> -#include <hush.h> #define BUFLEN 16 @@ -211,7 +210,7 @@ static void kw_sysrst_action(void) debug("Starting %s process...\n", __FUNCTION__); ret = run_command(s, 0); - if (ret < 0) + if (ret != 0) debug("Error.. %s failed\n", __FUNCTION__); else debug("%s process finished\n", __FUNCTION__); diff --git a/arch/arm/cpu/arm926ejs/orion5x/cpu.c b/arch/arm/cpu/arm926ejs/orion5x/cpu.c index b55c5f09433..f88db3b1f96 100644 --- a/arch/arm/cpu/arm926ejs/orion5x/cpu.c +++ b/arch/arm/cpu/arm926ejs/orion5x/cpu.c @@ -15,7 +15,6 @@ #include <asm/io.h> #include <u-boot/md5.h> #include <asm/arch/cpu.h> -#include <hush.h> #define BUFLEN 16 diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c index 28c16f8d02e..828d10bb5a4 100644 --- a/arch/arm/cpu/armv7/am33xx/board.c +++ b/arch/arm/cpu/armv7/am33xx/board.c @@ -144,6 +144,19 @@ int arch_misc_init(void) #ifndef CONFIG_SKIP_LOWLEVEL_INIT /* + * In the case of non-SPL based booting we'll want to call these + * functions a tiny bit later as it will require gd to be set and cleared + * and that's not true in s_init in this case so we cannot do it there. + */ +int board_early_init_f(void) +{ + prcm_init(); + set_mux_conf_regs(); + + return 0; +} + +/* * This function is the place to do per-board things such as ramp up the * MPU clock frequency. */ @@ -224,7 +237,7 @@ void s_init(void) set_uart_mux_conf(); setup_clocks_for_console(); uart_soft_reset(); -#ifdef CONFIG_NOR_BOOT +#if defined(CONFIG_NOR_BOOT) || defined(CONFIG_QSPI_BOOT) gd->baudrate = CONFIG_BAUDRATE; serial_init(); gd->have_console = 1; @@ -232,20 +245,13 @@ void s_init(void) gd = &gdata; preloader_console_init(); #endif - prcm_init(); - set_mux_conf_regs(); #if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC) /* Enable RTC32K clock */ rtc32k_enable(); #endif +#ifdef CONFIG_SPL_BUILD + board_early_init_f(); sdram_init(); -} #endif - -#ifndef CONFIG_SYS_DCACHE_OFF -void enable_caches(void) -{ - /* Enable D-cache. I-cache is already enabled in start.S */ - dcache_enable(); } -#endif /* !CONFIG_SYS_DCACHE_OFF */ +#endif diff --git a/arch/arm/cpu/armv7/am33xx/clock.c b/arch/arm/cpu/armv7/am33xx/clock.c index 0672798fe04..ec7d46838b7 100644 --- a/arch/arm/cpu/armv7/am33xx/clock.c +++ b/arch/arm/cpu/armv7/am33xx/clock.c @@ -170,8 +170,19 @@ void do_enable_clocks(u32 *const *clk_domains, }; } +/* + * Before scaling up the clocks we need to have the PMIC scale up the + * voltages first. This will be dependent on which PMIC is in use + * and in some cases we may not be scaling things up at all and thus not + * need to do anything here. + */ +__weak void scale_vcores(void) +{ +} + void prcm_init() { enable_basic_clocks(); + scale_vcores(); setup_dplls(); } diff --git a/arch/arm/cpu/armv7/am33xx/clock_am43xx.c b/arch/arm/cpu/armv7/am33xx/clock_am43xx.c index d0bc2340c83..31188c85bcc 100644 --- a/arch/arm/cpu/armv7/am33xx/clock_am43xx.c +++ b/arch/arm/cpu/armv7/am33xx/clock_am43xx.c @@ -53,6 +53,8 @@ const struct dpll_regs dpll_ddr_regs = { void setup_clocks_for_console(void) { + u32 clkctrl, idlest = MODULE_CLKCTRL_IDLEST_DISABLED; + /* Do not add any spl_debug prints in this function */ clrsetbits_le32(&cmwkup->wkclkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK, CD_CLKCTRL_CLKTRCTRL_SW_WKUP << @@ -63,6 +65,13 @@ void setup_clocks_for_console(void) MODULE_CLKCTRL_MODULEMODE_MASK, MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << MODULE_CLKCTRL_MODULEMODE_SHIFT); + + while ((idlest == MODULE_CLKCTRL_IDLEST_DISABLED) || + (idlest == MODULE_CLKCTRL_IDLEST_TRANSITIONING)) { + clkctrl = readl(&cmwkup->wkup_uart0ctrl); + idlest = (clkctrl & MODULE_CLKCTRL_IDLEST_MASK) >> + MODULE_CLKCTRL_IDLEST_SHIFT; + } } void enable_basic_clocks(void) diff --git a/arch/arm/cpu/armv7/am33xx/emif4.c b/arch/arm/cpu/armv7/am33xx/emif4.c index 2c67c322cae..a7a3e88cd75 100644 --- a/arch/arm/cpu/armv7/am33xx/emif4.c +++ b/arch/arm/cpu/armv7/am33xx/emif4.c @@ -21,6 +21,10 @@ DECLARE_GLOBAL_DATA_PTR; int dram_init(void) { +#ifndef CONFIG_SKIP_LOWLEVEL_INIT + sdram_init(); +#endif + /* dram_init must store complete ramsize in gd->ram_size */ gd->ram_size = get_ram_size( (void *)CONFIG_SYS_SDRAM_BASE, diff --git a/arch/arm/cpu/armv7/at91/config.mk b/arch/arm/cpu/armv7/at91/config.mk new file mode 100644 index 00000000000..09eab709554 --- /dev/null +++ b/arch/arm/cpu/armv7/at91/config.mk @@ -0,0 +1,10 @@ +# +# Copyright (C) 2014, Andreas Bießmann <andreas.devel@googlemail.com> +# +# SPDX-License-Identifier: GPL-2.0+ +# +ifdef CONFIG_SPL_BUILD +ALL-y += boot.bin +else +ALL-y += u-boot.img +endif diff --git a/arch/arm/cpu/armv7/at91/cpu.c b/arch/arm/cpu/armv7/at91/cpu.c index 2fbf60d5427..8d86f97e3da 100644 --- a/arch/arm/cpu/armv7/at91/cpu.c +++ b/arch/arm/cpu/armv7/at91/cpu.c @@ -61,6 +61,8 @@ int print_cpuinfo(void) void enable_caches(void) { + icache_enable(); + dcache_enable(); } unsigned int get_chip_id(void) diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c index 1fea4d66639..400d134d549 100644 --- a/arch/arm/cpu/armv7/exynos/clock.c +++ b/arch/arm/cpu/armv7/exynos/clock.c @@ -869,7 +869,7 @@ static void exynos4_set_mmc_clk(int dev_index, unsigned int div) { struct exynos4_clock *clk = (struct exynos4_clock *)samsung_get_base_clock(); - unsigned int addr; + unsigned int addr, clear_bit, set_bit; /* * CLK_DIV_FSYS1 @@ -877,44 +877,26 @@ static void exynos4_set_mmc_clk(int dev_index, unsigned int div) * CLK_DIV_FSYS2 * MMC2_PRE_RATIO [15:8], MMC3_PRE_RATIO [31:24] * CLK_DIV_FSYS3 - * MMC4_PRE_RATIO [15:8] + * MMC4_RATIO [3:0] */ if (dev_index < 2) { addr = (unsigned int)&clk->div_fsys1; - } else if (dev_index == 4) { + clear_bit = MASK_PRE_RATIO(dev_index); + set_bit = SET_PRE_RATIO(dev_index, div); + } else if (dev_index == 4) { addr = (unsigned int)&clk->div_fsys3; dev_index -= 4; + /* MMC4 is controlled with the MMC4_RATIO value */ + clear_bit = MASK_RATIO(dev_index); + set_bit = SET_RATIO(dev_index, div); } else { addr = (unsigned int)&clk->div_fsys2; dev_index -= 2; + clear_bit = MASK_PRE_RATIO(dev_index); + set_bit = SET_PRE_RATIO(dev_index, div); } - clrsetbits_le32(addr, 0xff << ((dev_index << 4) + 8), - (div & 0xff) << ((dev_index << 4) + 8)); -} - -/* exynos4x12: set the mmc clock */ -static void exynos4x12_set_mmc_clk(int dev_index, unsigned int div) -{ - struct exynos4x12_clock *clk = - (struct exynos4x12_clock *)samsung_get_base_clock(); - unsigned int addr; - - /* - * CLK_DIV_FSYS1 - * MMC0_PRE_RATIO [15:8], MMC1_PRE_RATIO [31:24] - * CLK_DIV_FSYS2 - * MMC2_PRE_RATIO [15:8], MMC3_PRE_RATIO [31:24] - */ - if (dev_index < 2) { - addr = (unsigned int)&clk->div_fsys1; - } else { - addr = (unsigned int)&clk->div_fsys2; - dev_index -= 2; - } - - clrsetbits_le32(addr, 0xff << ((dev_index << 4) + 8), - (div & 0xff) << ((dev_index << 4) + 8)); + clrsetbits_le32(addr, clear_bit, set_bit); } /* exynos5: set the mmc clock */ @@ -1612,10 +1594,7 @@ void set_mmc_clk(int dev_index, unsigned int div) else exynos5_set_mmc_clk(dev_index, div); } else { - if (proid_is_exynos4412()) - exynos4x12_set_mmc_clk(dev_index, div); - else - exynos4_set_mmc_clk(dev_index, div); + exynos4_set_mmc_clk(dev_index, div); } } diff --git a/arch/arm/cpu/armv7/exynos/lowlevel_init.c b/arch/arm/cpu/armv7/exynos/lowlevel_init.c index 11fe5b8d048..dcc270ffe4b 100644 --- a/arch/arm/cpu/armv7/exynos/lowlevel_init.c +++ b/arch/arm/cpu/armv7/exynos/lowlevel_init.c @@ -39,6 +39,7 @@ enum { DO_CLOCKS = 1 << 1, DO_MEM_RESET = 1 << 2, DO_UART = 1 << 3, + DO_POWER = 1 << 4, }; int do_lowlevel_init(void) @@ -48,6 +49,8 @@ int do_lowlevel_init(void) arch_cpu_init(); + set_ps_hold_ctrl(); + reset_status = get_reset_status(); switch (reset_status) { @@ -60,9 +63,12 @@ int do_lowlevel_init(void) break; default: /* This is a normal boot (not a wake from sleep) */ - actions = DO_CLOCKS | DO_MEM_RESET; + actions = DO_CLOCKS | DO_MEM_RESET | DO_POWER; } + if (actions & DO_POWER) + set_ps_hold_ctrl(); + if (actions & DO_CLOCKS) { system_clock_init(); mem_ctrl_init(actions & DO_MEM_RESET); diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c index ee7c2e5a4be..86a0c753267 100644 --- a/arch/arm/cpu/armv7/exynos/pinmux.c +++ b/arch/arm/cpu/armv7/exynos/pinmux.c @@ -573,15 +573,26 @@ static void exynos4_i2c_config(int peripheral, int flags) static int exynos4_mmc_config(int peripheral, int flags) { int i, start = 0, start_ext = 0; + unsigned int func, ext_func; switch (peripheral) { case PERIPH_ID_SDMMC0: start = EXYNOS4_GPIO_K00; start_ext = EXYNOS4_GPIO_K13; + func = S5P_GPIO_FUNC(0x2); + ext_func = S5P_GPIO_FUNC(0x3); break; case PERIPH_ID_SDMMC2: start = EXYNOS4_GPIO_K20; start_ext = EXYNOS4_GPIO_K33; + func = S5P_GPIO_FUNC(0x2); + ext_func = S5P_GPIO_FUNC(0x3); + break; + case PERIPH_ID_SDMMC4: + start = EXYNOS4_GPIO_K00; + start_ext = EXYNOS4_GPIO_K13; + func = S5P_GPIO_FUNC(0x3); + ext_func = S5P_GPIO_FUNC(0x4); break; default: return -1; @@ -589,13 +600,14 @@ static int exynos4_mmc_config(int peripheral, int flags) for (i = start; i < (start + 7); i++) { if (i == (start + 2)) continue; - gpio_cfg_pin(i, S5P_GPIO_FUNC(0x2)); + gpio_cfg_pin(i, func); gpio_set_pull(i, S5P_GPIO_PULL_NONE); gpio_set_drv(i, S5P_GPIO_DRV_4X); } + /* SDMMC2 do not use 8bit mode at exynos4 */ if (flags & PINMUX_FLAG_8BIT_MODE) { for (i = start_ext; i < (start_ext + 4); i++) { - gpio_cfg_pin(i, S5P_GPIO_FUNC(0x3)); + gpio_cfg_pin(i, ext_func); gpio_set_pull(i, S5P_GPIO_PULL_NONE); gpio_set_drv(i, S5P_GPIO_DRV_4X); } @@ -676,15 +688,26 @@ static void exynos4x12_i2c_config(int peripheral, int flags) static int exynos4x12_mmc_config(int peripheral, int flags) { int i, start = 0, start_ext = 0; + unsigned int func, ext_func; switch (peripheral) { case PERIPH_ID_SDMMC0: start = EXYNOS4X12_GPIO_K00; start_ext = EXYNOS4X12_GPIO_K13; + func = S5P_GPIO_FUNC(0x2); + ext_func = S5P_GPIO_FUNC(0x3); break; case PERIPH_ID_SDMMC2: start = EXYNOS4X12_GPIO_K20; start_ext = EXYNOS4X12_GPIO_K33; + func = S5P_GPIO_FUNC(0x2); + ext_func = S5P_GPIO_FUNC(0x3); + break; + case PERIPH_ID_SDMMC4: + start = EXYNOS4_GPIO_K00; + start_ext = EXYNOS4_GPIO_K13; + func = S5P_GPIO_FUNC(0x3); + ext_func = S5P_GPIO_FUNC(0x4); break; default: return -1; @@ -692,13 +715,13 @@ static int exynos4x12_mmc_config(int peripheral, int flags) for (i = start; i < (start + 7); i++) { if (i == (start + 2)) continue; - gpio_cfg_pin(i, S5P_GPIO_FUNC(0x2)); + gpio_cfg_pin(i, func); gpio_set_pull(i, S5P_GPIO_PULL_NONE); gpio_set_drv(i, S5P_GPIO_DRV_4X); } if (flags & PINMUX_FLAG_8BIT_MODE) { for (i = start_ext; i < (start_ext + 4); i++) { - gpio_cfg_pin(i, S5P_GPIO_FUNC(0x3)); + gpio_cfg_pin(i, ext_func); gpio_set_pull(i, S5P_GPIO_PULL_NONE); gpio_set_drv(i, S5P_GPIO_DRV_4X); } @@ -759,10 +782,10 @@ static int exynos4_pinmux_config(int peripheral, int flags) break; case PERIPH_ID_SDMMC0: case PERIPH_ID_SDMMC2: + case PERIPH_ID_SDMMC4: return exynos4_mmc_config(peripheral, flags); case PERIPH_ID_SDMMC1: case PERIPH_ID_SDMMC3: - case PERIPH_ID_SDMMC4: debug("SDMMC device %d not implemented\n", peripheral); return -1; default: @@ -794,10 +817,10 @@ static int exynos4x12_pinmux_config(int peripheral, int flags) break; case PERIPH_ID_SDMMC0: case PERIPH_ID_SDMMC2: + case PERIPH_ID_SDMMC4: return exynos4x12_mmc_config(peripheral, flags); case PERIPH_ID_SDMMC1: case PERIPH_ID_SDMMC3: - case PERIPH_ID_SDMMC4: debug("SDMMC device %d not implemented\n", peripheral); return -1; default: diff --git a/arch/arm/cpu/armv7/exynos/power.c b/arch/arm/cpu/armv7/exynos/power.c index 563abd750f5..638ee0b30b5 100644 --- a/arch/arm/cpu/armv7/exynos/power.c +++ b/arch/arm/cpu/armv7/exynos/power.c @@ -112,6 +112,12 @@ static void exynos5_set_ps_hold_ctrl(void) EXYNOS_PS_HOLD_CONTROL_DATA_HIGH); } +/* + * Set ps_hold data driving value high + * This enables the machine to stay powered on + * after the initial power-on condition goes away + * (e.g. power button). + */ void set_ps_hold_ctrl(void) { if (cpu_is_exynos5()) diff --git a/arch/arm/cpu/armv7/exynos/spl_boot.c b/arch/arm/cpu/armv7/exynos/spl_boot.c index ade45fd5d3f..79166303d13 100644 --- a/arch/arm/cpu/armv7/exynos/spl_boot.c +++ b/arch/arm/cpu/armv7/exynos/spl_boot.c @@ -4,8 +4,8 @@ * SPDX-License-Identifier: GPL-2.0+ */ -#include<common.h> -#include<config.h> +#include <common.h> +#include <config.h> #include <asm/arch/clock.h> #include <asm/arch/clk.h> diff --git a/arch/arm/cpu/armv7/keystone/init.c b/arch/arm/cpu/armv7/keystone/init.c index 044015aed64..4df5ae1cae9 100644 --- a/arch/arm/cpu/armv7/keystone/init.c +++ b/arch/arm/cpu/armv7/keystone/init.c @@ -8,6 +8,7 @@ */ #include <common.h> +#include <ns16550.h> #include <asm/io.h> #include <asm/arch/clock.h> #include <asm/arch/hardware.h> @@ -30,6 +31,14 @@ int arch_cpu_init(void) share_all_segments(11); /* PCIE */ #endif + /* + * just initialise the COM2 port so that TI specific + * UART register PWREMU_MGMT is initialized. Linux UART + * driver doesn't handle this. + */ + NS16550_init((NS16550_t)(CONFIG_SYS_NS16550_COM2), + CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE); + return 0; } diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile index 5f5132f6617..7695e16d36f 100644 --- a/arch/arm/cpu/armv7/omap-common/Makefile +++ b/arch/arm/cpu/armv7/omap-common/Makefile @@ -22,6 +22,10 @@ obj-y += pipe3-phy.o obj-$(CONFIG_SCSI_AHCI_PLAT) += sata.o endif +ifeq ($(CONFIG_SYS_DCACHE_OFF),) +obj-y += omap-cache.o +endif + ifeq ($(CONFIG_OMAP34XX),) obj-y += boot-common.o obj-y += lowlevel_init.o diff --git a/arch/arm/cpu/armv7/omap-common/hwinit-common.c b/arch/arm/cpu/armv7/omap-common/hwinit-common.c index ba97d9ec565..5f50a198015 100644 --- a/arch/arm/cpu/armv7/omap-common/hwinit-common.c +++ b/arch/arm/cpu/armv7/omap-common/hwinit-common.c @@ -18,13 +18,8 @@ #include <asm/emif.h> #include <asm/omap_common.h> #include <linux/compiler.h> -#include <asm/cache.h> #include <asm/system.h> -#define ARMV7_DCACHE_WRITEBACK 0xe -#define ARMV7_DOMAIN_CLIENT 1 -#define ARMV7_DOMAIN_MASK (0x3 << 0) - DECLARE_GLOBAL_DATA_PTR; void do_set_mux(u32 base, struct pad_conf_entry const *array, int size) @@ -263,40 +258,3 @@ int print_cpuinfo(void) return 0; } #endif - -#ifndef CONFIG_SYS_DCACHE_OFF -void enable_caches(void) -{ - /* Enable D-cache. I-cache is already enabled in start.S */ - dcache_enable(); -} - -void dram_bank_mmu_setup(int bank) -{ - bd_t *bd = gd->bd; - int i; - - u32 start = bd->bi_dram[bank].start >> 20; - u32 size = bd->bi_dram[bank].size >> 20; - u32 end = start + size; - - debug("%s: bank: %d\n", __func__, bank); - for (i = start; i < end; i++) - set_section_dcache(i, ARMV7_DCACHE_WRITEBACK); - -} - -void arm_init_domains(void) -{ - u32 reg; - - reg = get_dacr(); - /* - * Set DOMAIN to client access so that all permissions - * set in pagetables are validated by the mmu. - */ - reg &= ~ARMV7_DOMAIN_MASK; - reg |= ARMV7_DOMAIN_CLIENT; - set_dacr(reg); -} -#endif diff --git a/arch/arm/cpu/armv7/omap-common/omap-cache.c b/arch/arm/cpu/armv7/omap-common/omap-cache.c new file mode 100644 index 00000000000..579bebf93fe --- /dev/null +++ b/arch/arm/cpu/armv7/omap-common/omap-cache.c @@ -0,0 +1,56 @@ +/* + * + * Common functions for OMAP4/5 based boards + * + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * + * Author : + * Aneesh V <aneesh@ti.com> + * Steve Sakoman <steve@sakoman.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/cache.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define ARMV7_DCACHE_WRITEBACK 0xe +#define ARMV7_DOMAIN_CLIENT 1 +#define ARMV7_DOMAIN_MASK (0x3 << 0) + +void enable_caches(void) +{ + /* Enable D-cache. I-cache is already enabled in start.S */ + dcache_enable(); +} + +void dram_bank_mmu_setup(int bank) +{ + bd_t *bd = gd->bd; + int i; + + u32 start = bd->bi_dram[bank].start >> 20; + u32 size = bd->bi_dram[bank].size >> 20; + u32 end = start + size; + + debug("%s: bank: %d\n", __func__, bank); + for (i = start; i < end; i++) + set_section_dcache(i, ARMV7_DCACHE_WRITEBACK); +} + +void arm_init_domains(void) +{ + u32 reg; + + reg = get_dacr(); + /* + * Set DOMAIN to client access so that all permissions + * set in pagetables are validated by the mmu. + */ + reg &= ~ARMV7_DOMAIN_MASK; + reg |= ARMV7_DOMAIN_CLIENT; + set_dacr(reg); +} diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c index 9bb1a1c8f9a..e252e7fd950 100644 --- a/arch/arm/cpu/armv7/omap3/board.c +++ b/arch/arm/cpu/armv7/omap3/board.c @@ -478,11 +478,3 @@ void omap3_outer_cache_disable(void) omap3_update_aux_cr(0, 0x2); } #endif /* !CONFIG_SYS_L2CACHE_OFF */ - -#ifndef CONFIG_SYS_DCACHE_OFF -void enable_caches(void) -{ - /* Enable D-cache. I-cache is already enabled in start.S */ - dcache_enable(); -} -#endif /* !CONFIG_SYS_DCACHE_OFF */ diff --git a/arch/arm/cpu/armv7/omap3/mem.c b/arch/arm/cpu/armv7/omap3/mem.c index e6494096544..1832affa5bb 100644 --- a/arch/arm/cpu/armv7/omap3/mem.c +++ b/arch/arm/cpu/armv7/omap3/mem.c @@ -21,17 +21,6 @@ struct gpmc *gpmc_cfg; #if defined(CONFIG_CMD_NAND) -#if defined(GPMC_NAND_ECC_SP_x8_LAYOUT) || defined(GPMC_NAND_ECC_LP_x8_LAYOUT) -static const u32 gpmc_m_nand[GPMC_MAX_REG] = { - SMNAND_GPMC_CONFIG1, - SMNAND_GPMC_CONFIG2, - SMNAND_GPMC_CONFIG3, - SMNAND_GPMC_CONFIG4, - SMNAND_GPMC_CONFIG5, - SMNAND_GPMC_CONFIG6, - 0, -}; -#else static const u32 gpmc_m_nand[GPMC_MAX_REG] = { M_NAND_GPMC_CONFIG1, M_NAND_GPMC_CONFIG2, @@ -40,7 +29,6 @@ static const u32 gpmc_m_nand[GPMC_MAX_REG] = { M_NAND_GPMC_CONFIG5, M_NAND_GPMC_CONFIG6, 0 }; -#endif #endif /* CONFIG_CMD_NAND */ #if defined(CONFIG_CMD_ONENAND) diff --git a/arch/arm/cpu/armv7/zynq/u-boot.lds b/arch/arm/cpu/armv7/zynq/u-boot.lds index 69500a64e2a..4dc9bb0102c 100644 --- a/arch/arm/cpu/armv7/zynq/u-boot.lds +++ b/arch/arm/cpu/armv7/zynq/u-boot.lds @@ -18,6 +18,7 @@ SECTIONS .text : { *(.__image_copy_start) + *(.vectors) CPUDIR/start.o (.text*) *(.text*) } diff --git a/arch/arm/cpu/armv8/transition.S b/arch/arm/cpu/armv8/transition.S index e0a59460091..38dea5c5187 100644 --- a/arch/arm/cpu/armv8/transition.S +++ b/arch/arm/cpu/armv8/transition.S @@ -43,7 +43,7 @@ ENTRY(armv8_switch_to_el1) mrs x0, cnthctl_el2 orr x0, x0, #0x3 /* Enable EL1 access to timers */ msr cnthctl_el2, x0 - msr cntvoff_el2, x0 + msr cntvoff_el2, xzr mrs x0, cntkctl_el1 orr x0, x0, #0x3 /* Enable EL0 access to timers */ msr cntkctl_el1, x0 diff --git a/arch/arm/cpu/at91-common/spl.c b/arch/arm/cpu/at91-common/spl.c index 7f4debb9125..cbb5a529da2 100644 --- a/arch/arm/cpu/at91-common/spl.c +++ b/arch/arm/cpu/at91-common/spl.c @@ -20,6 +20,43 @@ static void at91_disable_wdt(void) writel(AT91_WDT_MR_WDDIS, &wdt->mr); } +static void switch_to_main_crystal_osc(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + u32 tmp; + + tmp = readl(&pmc->mor); + tmp &= ~AT91_PMC_MOR_OSCOUNT(0xff); + tmp &= ~AT91_PMC_MOR_KEY(0xff); + tmp |= AT91_PMC_MOR_MOSCEN; + tmp |= AT91_PMC_MOR_OSCOUNT(8); + tmp |= AT91_PMC_MOR_KEY(0x37); + writel(tmp, &pmc->mor); + while (!(readl(&pmc->sr) & AT91_PMC_IXR_MOSCS)) + ; + + tmp = readl(&pmc->mor); + tmp &= ~AT91_PMC_MOR_OSCBYPASS; + tmp &= ~AT91_PMC_MOR_KEY(0xff); + tmp |= AT91_PMC_MOR_KEY(0x37); + writel(tmp, &pmc->mor); + + tmp = readl(&pmc->mor); + tmp |= AT91_PMC_MOR_MOSCSEL; + tmp &= ~AT91_PMC_MOR_KEY(0xff); + tmp |= AT91_PMC_MOR_KEY(0x37); + writel(tmp, &pmc->mor); + + while (!(readl(&pmc->sr) & AT91_PMC_IXR_MOSCSELS)) + ; + + tmp = readl(&pmc->mor); + tmp &= ~AT91_PMC_MOR_MOSCRCEN; + tmp &= ~AT91_PMC_MOR_KEY(0xff); + tmp |= AT91_PMC_MOR_KEY(0x37); + writel(tmp, &pmc->mor); +} + void at91_plla_init(u32 pllar) { struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; @@ -76,6 +113,8 @@ u32 spl_boot_mode(void) void s_init(void) { + switch_to_main_crystal_osc(); + /* disable watchdog */ at91_disable_wdt(); |