diff options
Diffstat (limited to 'arch/arm/dts/imx8mm-phyboard-polis-rdk.dts')
| -rw-r--r-- | arch/arm/dts/imx8mm-phyboard-polis-rdk.dts | 460 |
1 files changed, 0 insertions, 460 deletions
diff --git a/arch/arm/dts/imx8mm-phyboard-polis-rdk.dts b/arch/arm/dts/imx8mm-phyboard-polis-rdk.dts deleted file mode 100644 index 03e7679217b..00000000000 --- a/arch/arm/dts/imx8mm-phyboard-polis-rdk.dts +++ /dev/null @@ -1,460 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (C) 2022 PHYTEC Messtechnik GmbH - * Author: Teresa Remmet <t.remmet@phytec.de> - */ - -/dts-v1/; - -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/phy/phy-imx8-pcie.h> -#include "imx8mm-phycore-som.dtsi" - -/ { - model = "PHYTEC phyBOARD-Polis-i.MX8MM RDK"; - compatible = "phytec,imx8mm-phyboard-polis-rdk", - "phytec,imx8mm-phycore-som", "fsl,imx8mm"; - - chosen { - stdout-path = &uart3; - }; - - bt_osc_32k: bt-lp-clock { - compatible = "fixed-clock"; - clock-frequency = <32768>; - clock-output-names = "bt_osc_32k"; - #clock-cells = <0>; - }; - - can_osc_40m: can-clock { - compatible = "fixed-clock"; - clock-frequency = <40000000>; - clock-output-names = "can_osc_40m"; - #clock-cells = <0>; - }; - - fan { - compatible = "gpio-fan"; - gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; - gpio-fan,speed-map = <0 0 - 13000 1>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fan>; - #cooling-cells = <2>; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_leds>; - - led-0 { - color = <LED_COLOR_ID_RED>; - function = LED_FUNCTION_DISK; - gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc2"; - }; - - led-1 { - color = <LED_COLOR_ID_BLUE>; - function = LED_FUNCTION_DISK; - gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc1"; - }; - - led-2 { - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_CPU; - gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - }; - - usdhc1_pwrseq: pwr-seq { - compatible = "mmc-pwrseq-simple"; - post-power-on-delay-ms = <100>; - power-off-delay-us = <60>; - reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; - }; - - reg_can_en: regulator-can-en { - compatible = "regulator-fixed"; - gpio = <&gpio1 9 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_can_en>; - regulator-max-microvolt = <3300000>; - regulator-min-microvolt = <3300000>; - regulator-name = "CAN_EN"; - startup-delay-us = <20>; - }; - - reg_usb_otg1_vbus: regulator-usb-otg1 { - compatible = "regulator-fixed"; - gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; - enable-active-high; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg1pwrgrp>; - regulator-name = "usb_otg1_vbus"; - regulator-max-microvolt = <5000000>; - regulator-min-microvolt = <5000000>; - }; - - reg_usdhc2_vmmc: regulator-usdhc2 { - compatible = "regulator-fixed"; - gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; - enable-active-high; - off-on-delay-us = <20000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; - regulator-max-microvolt = <3300000>; - regulator-min-microvolt = <3300000>; - regulator-name = "VSD_3V3"; - }; - - reg_vcc_3v3: regulator-vcc-3v3 { - compatible = "regulator-fixed"; - regulator-max-microvolt = <3300000>; - regulator-min-microvolt = <3300000>; - regulator-name = "VCC_3V3"; - }; -}; - -/* SPI - CAN MCP251XFD */ -&ecspi1 { - cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi1>; - status = "okay"; - - can0: can@0 { - compatible = "microchip,mcp251xfd"; - clocks = <&can_osc_40m>; - interrupt-parent = <&gpio1>; - interrupts = <8 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_can_int>; - reg = <0>; - spi-max-frequency = <20000000>; - xceiver-supply = <®_can_en>; - }; -}; - -&gpio1 { - gpio-line-names = "nINT_ETHPHY", "LED_RED", "WDOG_INT", "X_RTC_INT", - "", "", "", "RESET_ETHPHY", - "CAN_nINT", "CAN_EN", "nENABLE_FLATLINK", "", - "USB_OTG_VBUS_EN", "", "LED_GREEN", "LED_BLUE"; -}; - -&gpio2 { - gpio-line-names = "", "", "", "", - "", "", "BT_REG_ON", "WL_REG_ON", - "BT_DEV_WAKE", "BT_HOST_WAKE", "", "", - "X_SD2_CD_B", "", "", "", - "", "", "", "SD2_RESET_B"; -}; - -&gpio4 { - gpio-line-names = "", "", "", "", - "", "", "", "", - "FAN", "miniPCIe_nPERST", "", "", - "COEX1", "COEX2"; -}; - -&gpio5 { - gpio-line-names = "", "", "", "", - "", "", "", "", - "", "ECSPI1_SS0"; -}; - -&i2c4 { - clock-frequency = <400000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c4>; -}; - -/* PCIe */ -&pcie0 { - assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, - <&clk IMX8MM_CLK_PCIE1_CTRL>; - assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>, - <&clk IMX8MM_SYS_PLL2_250M>; - assigned-clock-rates = <10000000>, <250000000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pcie>; - reset-gpio = <&gpio4 9 GPIO_ACTIVE_LOW>; - status = "okay"; -}; - -&pcie_phy { - clocks = <&clk IMX8MM_CLK_PCIE1_PHY>; - fsl,clkreq-unsupported; - fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>; - fsl,tx-deemph-gen1 = <0x2d>; - fsl,tx-deemph-gen2 = <0xf>; - status = "okay"; -}; - -&rv3028 { - trickle-resistor-ohms = <3000>; -}; - -&snvs_pwrkey { - status = "okay"; -}; - -/* UART - RS232/RS485 */ -&uart1 { - assigned-clocks = <&clk IMX8MM_CLK_UART1>; - assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - uart-has-rtscts; - status = "okay"; -}; - -/* UART - Sterling-LWB Bluetooth */ -&uart2 { - assigned-clocks = <&clk IMX8MM_CLK_UART2>; - assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>; - fsl,dte-mode; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2_bt>; - uart-has-rtscts; - status = "okay"; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - clocks = <&bt_osc_32k>; - clock-names = "lpo"; - device-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; - interrupt-names = "host-wakeup"; - interrupt-parent = <&gpio2>; - interrupts = <9 IRQ_TYPE_EDGE_BOTH>; - max-speed = <2000000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_bt>; - shutdown-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>; - vddio-supply = <®_vcc_3v3>; - }; -}; - -/* UART - console */ -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; - status = "okay"; -}; - -/* USB */ -&usbotg1 { - adp-disable; - dr_mode = "otg"; - over-current-active-low; - samsung,picophy-pre-emp-curr-control = <3>; - samsung,picophy-dc-vol-level-adjust = <7>; - srp-disable; - vbus-supply = <®_usb_otg1_vbus>; - status = "okay"; -}; - -&usbotg2 { - disable-over-current; - dr_mode = "host"; - samsung,picophy-pre-emp-curr-control = <3>; - samsung,picophy-dc-vol-level-adjust = <7>; - status = "okay"; -}; - -/* SDIO - Sterling-LWB Wifi */ -&usdhc1 { - assigned-clocks = <&clk IMX8MM_CLK_USDHC1>; - assigned-clock-rates = <200000000>; - bus-width = <4>; - mmc-pwrseq = <&usdhc1_pwrseq>; - non-removable; - no-1-8-v; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_wlan>; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - brcmf: wifi@1 { - compatible = "brcm,bcm4329-fmac"; - reg = <1>; - }; -}; - -/* SD-Card */ -&usdhc2 { - assigned-clocks = <&clk IMX8MM_CLK_USDHC2>; - assigned-clock-rates = <200000000>; - bus-width = <4>; - cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; - disable-wp; - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; - pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; - pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; - vmmc-supply = <®_usdhc2_vmmc>; - vqmmc-supply = <®_nvcc_sd2>; - status = "okay"; -}; - -&iomuxc { - pinctrl_bt: btgrp { - fsl,pins = < - MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6 0x00 - MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8 0x00 - MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9 0x00 - >; - }; - - pinctrl_can_en: can-engrp { - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x00 - >; - }; - - pinctrl_can_int: can-intgrp { - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x00 - >; - }; - - pinctrl_ecspi1: ecspi1grp { - fsl,pins = < - MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x80 - MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x80 - MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x80 - MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x00 - >; - }; - - pinctrl_fan: fan0grp { - fsl,pins = < - MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x16 - >; - }; - - pinctrl_i2c4: i2c4grp { - fsl,pins = < - MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c2 - MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c2 - >; - }; - - pinctrl_leds: leds1grp { - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x16 - MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x16 - MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x16 - >; - }; - - pinctrl_pcie: pciegrp { - fsl,pins = < - MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x00 - MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12 0x12 - MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x12 - >; - }; - - pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { - fsl,pins = < - MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x40 - >; - }; - - pinctrl_uart1: uart1grp { - fsl,pins = < - MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x00 - MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B 0x00 - MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x00 - MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B 0x00 - >; - }; - - pinctrl_uart2_bt: uart2btgrp { - fsl,pins = < - MX8MM_IOMUXC_SAI3_RXC_UART2_DTE_RTS_B 0x00 - MX8MM_IOMUXC_SAI3_RXD_UART2_DTE_CTS_B 0x00 - MX8MM_IOMUXC_SAI3_TXC_UART2_DTE_RX 0x00 - MX8MM_IOMUXC_SAI3_TXFS_UART2_DTE_TX 0x00 - >; - }; - - pinctrl_uart3: uart3grp { - fsl,pins = < - MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x40 - MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x40 - >; - }; - - pinctrl_usbotg1pwrgrp: usbotg1pwrgrp { - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x00 - >; - }; - - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x182 - MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0xc6 - MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc6 - MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc6 - MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc6 - MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc6 - >; - }; - - pinctrl_usdhc2_gpio: usdhc2gpiogrp { - fsl,pins = < - MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x40 - >; - }; - - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 - MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x192 - MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d2 - MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d2 - MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d2 - MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d2 - MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d2 - >; - }; - - pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 - MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 - MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 - MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 - MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 - MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 - MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 - >; - }; - - pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 - MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 - MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 - MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 - MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 - MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 - MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 - >; - }; - - pinctrl_wlan: wlangrp { - fsl,pins = < - MX8MM_IOMUXC_SD1_DATA5_GPIO2_IO7 0x00 - >; - }; -}; |