diff options
Diffstat (limited to 'arch/arm/dts/kirkwood-nsa325.dts')
| -rw-r--r-- | arch/arm/dts/kirkwood-nsa325.dts | 231 |
1 files changed, 0 insertions, 231 deletions
diff --git a/arch/arm/dts/kirkwood-nsa325.dts b/arch/arm/dts/kirkwood-nsa325.dts deleted file mode 100644 index efc57cfa41e..00000000000 --- a/arch/arm/dts/kirkwood-nsa325.dts +++ /dev/null @@ -1,231 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* Device tree file for the Zyxel NSA 325 NAS box. - * - * Copyright (c) 2015, Hans Ulli Kroll <ulli.kroll@googlemail.com> - * - * - * Based upon the board setup file created by Peter Schildmann - */ - -/dts-v1/; - -#include "kirkwood-nsa3x0-common.dtsi" - -/ { - model = "ZyXEL NSA325"; - compatible = "zyxel,nsa325", "marvell,kirkwood-88f6282", "marvell,kirkwood"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x20000000>; - }; - - chosen { - bootargs = "console=ttyS0,115200"; - stdout-path = &uart0; - }; - - ocp@f1000000 { - pinctrl: pin-controller@10000 { - pinctrl-names = "default"; - - pmx_led_hdd2_green: pmx-led-hdd2-green { - marvell,pins = "mpp12"; - marvell,function = "gpio"; - }; - - pmx_led_hdd2_red: pmx-led-hdd2-red { - marvell,pins = "mpp13"; - marvell,function = "gpio"; - }; - - pmx_mcu_data: pmx-mcu-data { - marvell,pins = "mpp14"; - marvell,function = "gpio"; - }; - - pmx_led_usb_green: pmx-led-usb-green { - marvell,pins = "mpp15"; - marvell,function = "gpio"; - }; - - pmx_mcu_clk: pmx-mcu-clk { - marvell,pins = "mpp16"; - marvell,function = "gpio"; - }; - - pmx_mcu_act: pmx-mcu-act { - marvell,pins = "mpp17"; - marvell,function = "gpio"; - }; - - pmx_led_sys_green: pmx-led-sys-green { - marvell,pins = "mpp28"; - marvell,function = "gpio"; - }; - - pmx_led_sys_orange: pmx-led-sys-orange { - marvell,pins = "mpp29"; - marvell,function = "gpio"; - }; - - pmx_led_hdd1_green: pmx-led-hdd1-green { - marvell,pins = "mpp41"; - marvell,function = "gpio"; - }; - - pmx_led_hdd1_red: pmx-led-hdd1-red { - marvell,pins = "mpp42"; - marvell,function = "gpio"; - }; - - pmx_htp: pmx-htp { - marvell,pins = "mpp43"; - marvell,function = "gpio"; - }; - - /* - * Buzzer needs to be switched at around 1kHz so is - * not compatible with the gpio-beeper driver. - */ - pmx_buzzer: pmx-buzzer { - marvell,pins = "mpp44"; - marvell,function = "gpio"; - }; - - pmx_vid_b1: pmx-vid-b1 { - marvell,pins = "mpp45"; - marvell,function = "gpio"; - }; - - pmx_power_resume_data: pmx-power-resume-data { - marvell,pins = "mpp47"; - marvell,function = "gpio"; - }; - - pmx_power_resume_clk: pmx-power-resume-clk { - marvell,pins = "mpp49"; - marvell,function = "gpio"; - }; - - pmx_pwr_sata1: pmx-pwr-sata1 { - marvell,pins = "mpp47"; - marvell,function = "gpio"; - }; - }; - - /* This board uses the pcf8563 RTC instead of the SoC RTC */ - rtc@10300 { - status = "disabled"; - }; - - i2c@11000 { - status = "okay"; - - pcf8563: pcf8563@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; - }; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_pwr_sata1>; - pinctrl-names = "default"; - - usb0_power: regulator@1 { - enable-active-high; - }; - - sata1_power: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "SATA1 Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - enable-active-high; - gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red - &pmx_led_usb_green - &pmx_led_sys_green &pmx_led_sys_orange - &pmx_led_copy_green &pmx_led_copy_red - &pmx_led_hdd1_green &pmx_led_hdd1_red>; - pinctrl-names = "default"; - - green-sys { - label = "nsa325:green:sys"; - gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; - }; - orange-sys { - label = "nsa325:orange:sys"; - gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; - }; - green-hdd1 { - label = "nsa325:green:hdd1"; - gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; - }; - red-hdd1 { - label = "nsa325:red:hdd1"; - gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; - }; - green-hdd2 { - label = "nsa325:green:hdd2"; - gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; - }; - red-hdd2 { - label = "nsa325:red:hdd2"; - gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; - }; - green-usb { - label = "nsa325:green:usb"; - gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; - }; - green-copy { - label = "nsa325:green:copy"; - gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; - }; - red-copy { - label = "nsa325:red:copy"; - gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; - }; - - /* The following pins are currently not assigned to a driver, - some of them should be configured as inputs. - pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act - &pmx_htp &pmx_vid_b1 - &pmx_power_resume_data &pmx_power_resume_clk>; */ - }; - -}; - -&mdio { - status = "okay"; - ethphy0: ethernet-phy@1 { - reg = <1>; - }; -}; - -ð0 { - status = "okay"; - ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; - -&pciec { - status = "okay"; -}; - -&pcie0 { - status = "okay"; -}; |