1 files changed, 0 insertions, 180 deletions
diff --git a/arch/arm/dts/kirkwood-pogoplug-series-4.dts b/arch/arm/dts/kirkwood-pogoplug-series-4.dts
deleted file mode 100644
index 5aa4669ae25..00000000000
--- a/arch/arm/dts/kirkwood-pogoplug-series-4.dts
+++ /dev/null
@@ -1,180 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * kirkwood-pogoplug-series-4.dts - Device tree file for PogoPlug Series 4
- * inspired by the board files made by Kevin Mihelich for ArchLinux,
- * and their DTS file.
- *
- * Copyright (C) 2015 Linus Walleij <linus.walleij@linaro.org>
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6192.dtsi"
-#include <dt-bindings/input/linux-event-codes.h>
-
-/ {
-	model = "Cloud Engines PogoPlug Series 4";
-	compatible = "cloudengines,pogoplugv4", "marvell,kirkwood-88f6192",
-		     "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>;
-	};
-
-	chosen {
-		stdout-path = "uart0:115200n8";
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_button_eject>;
-		pinctrl-names = "default";
-
-		eject {
-			debounce-interval = <50>;
-			wakeup-source;
-			linux,code = <KEY_EJECTCD>;
-			label = "Eject Button";
-			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_led_green &pmx_led_red>;
-		pinctrl-names = "default";
-
-		health {
-			label = "pogoplugv4:green:health";
-			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-		fault {
-			label = "pogoplugv4:red:fault";
-			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&pinctrl {
-	pmx_sata0: pmx-sata0 {
-		marvell,pins = "mpp21";
-		marvell,function = "sata0";
-	};
-
-	pmx_sata1: pmx-sata1 {
-		marvell,pins = "mpp20";
-		marvell,function = "sata1";
-	};
-
-	pmx_sdio_cd: pmx-sdio-cd {
-		marvell,pins = "mpp27";
-		marvell,function = "gpio";
-	};
-
-	pmx_sdio_wp: pmx-sdio-wp {
-		marvell,pins = "mpp28";
-		marvell,function = "gpio";
-	};
-
-	pmx_button_eject: pmx-button-eject {
-		marvell,pins = "mpp29";
-		marvell,function = "gpio";
-	};
-
-	pmx_led_green: pmx-led-green {
-		marvell,pins = "mpp22";
-		marvell,function = "gpio";
-	};
-
-	pmx_led_red: pmx-led-red {
-		marvell,pins = "mpp24";
-		marvell,function = "gpio";
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-/*
- * This PCIE controller has a USB 3.0 XHCI controller at 1,0
- */
-&pciec {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-	pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
-	pinctrl-names = "default";
-	nr-ports = <1>;
-};
-
-&sdio {
-	status = "okay";
-	pinctrl-0 = <&pmx_sdio &pmx_sdio_cd &pmx_sdio_wp>;
-	pinctrl-names = "default";
-	cd-gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
-};
-
-&nand {
-	/* 128 MiB of NAND flash */
-	chip-delay = <40>;
-	status = "okay";
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "u-boot";
-			reg = <0x00000000 0x200000>;
-			read-only;
-		};
-
-		partition@200000 {
-			label = "uImage";
-			reg = <0x00200000 0x300000>;
-		};
-
-		partition@500000 {
-			label = "uImage2";
-			reg = <0x00500000 0x300000>;
-		};
-
-		partition@800000 {
-			label = "failsafe";
-			reg = <0x00800000 0x800000>;
-		};
-
-		partition@1000000 {
-			label = "root";
-			reg = <0x01000000 0x7000000>;
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};