diff options
Diffstat (limited to 'arch/arm/dts/rk3566-soquartz-model-a.dts')
| -rw-r--r-- | arch/arm/dts/rk3566-soquartz-model-a.dts | 236 |
1 files changed, 0 insertions, 236 deletions
diff --git a/arch/arm/dts/rk3566-soquartz-model-a.dts b/arch/arm/dts/rk3566-soquartz-model-a.dts deleted file mode 100644 index f2095dfa4ea..00000000000 --- a/arch/arm/dts/rk3566-soquartz-model-a.dts +++ /dev/null @@ -1,236 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) - -/dts-v1/; - -#include "rk3566-soquartz.dtsi" - -/ { - model = "PINE64 RK3566 SOQuartz on Model A carrier board"; - compatible = "pine64,soquartz-model-a", "pine64,soquartz", "rockchip,rk3566"; - - aliases { - ethernet0 = &gmac1; - }; - - /* labeled DCIN_12V in schematic */ - vcc12v_dcin: vcc12v-dcin-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc12v_dcin"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - }; - - vcc5v0_usb: vcc5v0-usb-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_usb"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc12v_dcin>; - }; - - /* - * Labelled VCC3V0_SD in schematic to not conflict with PMIC - * regulator, it's 3.3v in actuality - */ - vcc3v0_sd: vcc3v0-sd-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc3v0_sd"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc3v3_sys>; - }; - - vcc3v3_pcie: vcc3v3-pcie-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_pcie"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc12v_dcin>; - }; - - vcc12v_pcie: vcc12v-pcie-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc12v_pcie"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - vin-supply = <&vcc12v_dcin>; - }; -}; - -/* phy for pcie */ -&combphy2 { - phy-supply = <&vcc3v3_sys>; - status = "okay"; -}; - -&gmac1 { - status = "okay"; -}; - -/* - * i2c1 is exposed on CM1 / Module1A - * pin 80 - SCL0 - i2c1_scl_m0, pullup to vcc3v3_pmu - * pin 82 - SDA0 - i2c1_sda_m0, pullup to vcc3v3_pmu - */ -&i2c1 { - status = "okay"; - - /* - * the rtc interrupt is tied to PMIC_PWRON, - * it will force reset the board if triggered. - */ - pcf85063: rtc@51 { - compatible = "nxp,pcf85063"; - reg = <0x51>; - }; -}; - -/* - * i2c2 is exposed on CM1 / Module1A - to PI40 - * pin 56 - GPIO3 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch - * pin 58 - GPIO2 - i2c2_sda_m1, pullup to vcc_3v3 - */ -&i2c2 { - status = "disabled"; -}; - -/* - * i2c3 is exposed on CM1 / Module1A - to PI40 - * pin 35 - ID_SC(GPIO28) - i2c3_scl_m0, pullup to vcc_3v3 - * pin 36 - ID_SD(GPIO27) - i2c3_sda_m0, pullup to vcc_3v3 - */ -&i2c3 { - status = "disabled"; -}; - -/* - * i2c4 is exposed on CM2 / Module1B - to PI40 - * pin 45 - GPIO24 - i2c4_scl_m1 - * pin 47 - GPIO23 - i2c4_sda_m1 - */ -&i2c4 { - status = "disabled"; -}; - -/* - * i2s1_8ch is exposed on CM1 / Module1A - to PI40 - * pin 24 - GPIO26 - i2s1_sdi1_m1 - * pin 25 - GPIO21 - i2s1_sdo0_m1 - * pin 26 - GPIO19 - i2s1_lrck_tx_m1 - * pin 27 - GPIO20 - i2s1_sdi0_m1 - * pin 29 - GPIO16 - i2s1_sdi3_m1 - * pin 30 - GPIO6 - i2s1_sdi2_m1 - * pin 40 - GPIO9 - i2s1_sdo1_m1, shared with spi3 - * pin 41 - GPIO25 - i2s1_sdo2_m1 - * pin 49 - GPIO18 - i2s1_sclk_tx_m1 - * pin 50 - GPIO17 - i2s1_mclk_m1 - * pin 56 - GPIO3 - i2s1_sdo3_m1, shared with i2c2 - */ -&i2s1_8ch { - status = "disabled"; -}; - -&led_diy { - status = "okay"; -}; - -&led_work { - status = "okay"; -}; - -&pcie2x1 { - vpcie3v3-supply = <&vcc3v3_pcie>; - status = "okay"; -}; - -&rgmii_phy1 { - status = "okay"; -}; - -&rgmii_phy1 { - status = "okay"; -}; - -/* - * saradc is exposed on CM1 / Module1A - to J2 - * pin 94 - AIN1 - saradc_vin3 - * pin 96 - AIN0 - saradc_vin2 - */ -&saradc { - status = "disabled"; -}; - -/* - * vmmc-supply is vcc3v3_sd on v1.0 and vcc3v0_sd on v1.1+ - * the soquartz SoM has SDMMC_PWR (CM1 pin 75) hardwired to vcc3v3_sys, - * so we use vcc3v3_sd here to ensure the regulator is enabled on older boards. - */ -&sdmmc0 { - vmmc-supply = <&vcc3v3_sd>; - status = "okay"; -}; - -/* - * spi3 is exposed on CM1 / Module1A - to PI40 - * pin 37 - GPIO7 - spi3_cs1_m0 - * pin 38 - GPIO11 - spi3_clk_m0 - * pin 39 - GPIO8 - spi3_cs0_m0 - * pin 40 - GPIO9 - spi3_miso_m0, shared with i2s1_8ch - * pin 44 - GPIO10 - spi3_mosi_m0 - */ -&spi3 { - status = "disabled"; -}; - -/* - * uart2 is exposed on CM1 / Module1A - to PI40 - * pin 51 - GPIO15 - uart2_rx_m0 - * pin 55 - GPIO14 - uart2_tx_m0 - */ -&uart2 { - status = "okay"; -}; - -/* - * uart7 is exposed on CM1 / Module1A - to PI40 - * pin 46 - GPIO22 - uart7_tx_m2 - * pin 47 - GPIO23 - uart7_rx_m2 - */ -&uart7 { - status = "okay"; -}; - -&usb2phy0 { - status = "okay"; -}; - -&usb2phy0_otg { - phy-supply = <&vcc5v0_usb>; - status = "okay"; -}; - -&usb_host0_xhci { - status = "okay"; -}; - -&vbus { - vin-supply = <&vcc5v0_usb>; -}; - -&vcc3v3_sd { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - status = "okay"; -}; |