diff options
Diffstat (limited to 'arch/arm/dts/stm32mp131.dtsi')
| -rw-r--r-- | arch/arm/dts/stm32mp131.dtsi | 60 |
1 files changed, 35 insertions, 25 deletions
diff --git a/arch/arm/dts/stm32mp131.dtsi b/arch/arm/dts/stm32mp131.dtsi index d23bbc3639d..215ad9298de 100644 --- a/arch/arm/dts/stm32mp131.dtsi +++ b/arch/arm/dts/stm32mp131.dtsi @@ -33,6 +33,8 @@ optee { method = "smc"; compatible = "linaro,optee-tz"; + interrupt-parent = <&intc>; + interrupts = <GIC_PPI 15 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; }; scmi: scmi { @@ -50,6 +52,28 @@ reg = <0x16>; #reset-cells = <1>; }; + + scmi_voltd: protocol@17 { + reg = <0x17>; + + scmi_regu: regulators { + #address-cells = <1>; + #size-cells = <0>; + + scmi_reg11: regulator@0 { + reg = <VOLTD_SCMI_REG11>; + regulator-name = "reg11"; + }; + scmi_reg18: regulator@1 { + reg = <VOLTD_SCMI_REG18>; + regulator-name = "reg18"; + }; + scmi_usb33: regulator@2 { + reg = <VOLTD_SCMI_USB33>; + regulator-name = "usb33"; + }; + }; + }; }; }; @@ -76,28 +100,6 @@ always-on; }; - /* PWR 1v1, 1v8 and 3v3 regulators defined as fixed, waiting for SCMI */ - reg11: reg11 { - compatible = "regulator-fixed"; - regulator-name = "reg11"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - }; - - reg18: reg18 { - compatible = "regulator-fixed"; - regulator-name = "reg18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - usb33: usb33 { - compatible = "regulator-fixed"; - regulator-name = "usb33"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - soc { compatible = "simple-bus"; #address-cells = <1>; @@ -799,7 +801,7 @@ g-tx-fifo-size = <256 16 16 16 16 16 16 16>; dr_mode = "otg"; otg-rev = <0x200>; - usb33d-supply = <&usb33>; + usb33d-supply = <&scmi_usb33>; status = "disabled"; }; @@ -1208,6 +1210,14 @@ }; }; + rng: rng@54004000 { + compatible = "st,stm32mp13-rng"; + reg = <0x54004000 0x400>; + clocks = <&rcc RNG1_K>; + resets = <&rcc RNG1_R>; + status = "disabled"; + }; + mdma: dma-controller@58000000 { compatible = "st,stm32h7-mdma"; reg = <0x58000000 0x1000>; @@ -1329,8 +1339,8 @@ reg = <0x5a006000 0x1000>; clocks = <&rcc USBPHY_K>; resets = <&rcc USBPHY_R>; - vdda1v1-supply = <®11>; - vdda1v8-supply = <®18>; + vdda1v1-supply = <&scmi_reg11>; + vdda1v8-supply = <&scmi_reg18>; status = "disabled"; usbphyc_port0: usb-phy@0 { |