1 files changed, 0 insertions, 242 deletions
diff --git a/arch/arm/dts/sun4i-a10-topwise-a721.dts b/arch/arm/dts/sun4i-a10-topwise-a721.dts
deleted file mode 100644
index 3628f12d252..00000000000
--- a/arch/arm/dts/sun4i-a10-topwise-a721.dts
+++ /dev/null
@@ -1,242 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2020 Pascal Roeleven <dev@pascalroeleven.nl>
- */
-
-/dts-v1/;
-#include "sun4i-a10.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	model = "Topwise A721";
-	compatible = "topwise,a721", "allwinner,sun4i-a10";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 0 100000 PWM_POLARITY_INVERTED>;
-		power-supply = <&reg_vbat>;
-		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
-		brightness-levels = <0 30 40 50 60 70 80 90 100>;
-		default-brightness-level = <8>;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	panel {
-		compatible = "starry,kr070pe2t";
-		backlight = <&backlight>;
-		power-supply = <&reg_lcd_power>;
-
-		port {
-			panel_input: endpoint {
-				remote-endpoint = <&tcon0_out_panel>;
-			};
-		};
-	};
-
-	reg_lcd_power: reg-lcd-power {
-		compatible = "regulator-fixed";
-		regulator-name = "reg-lcd-power";
-		gpio = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
-		enable-active-high;
-	};
-
-	reg_vbat: reg-vbat {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat";
-		regulator-min-microvolt = <3700000>;
-		regulator-max-microvolt = <3700000>;
-	};
-
-};
-
-&codec {
-	status = "okay";
-};
-
-&cpu0 {
-	cpu-supply = <&reg_dcdc2>;
-};
-
-&de {
-	status = "okay";
-};
-
-&ehci0 {
-	status = "okay";
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-
-	axp209: pmic@34 {
-		reg = <0x34>;
-		interrupts = <0>;
-	};
-};
-
-#include "axp209.dtsi"
-
-&ac_power_supply {
-	status = "okay";
-};
-
-&battery_power_supply {
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-
-	accelerometer@4c {
-		compatible = "fsl,mma7660";
-		reg = <0x4c>;
-	};
-};
-
-&i2c2 {
-	status = "okay";
-
-	touchscreen@38 {
-		compatible = "edt,edt-ft5406";
-		reg = <0x38>;
-		interrupt-parent = <&pio>;
-		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
-		touchscreen-size-x = <800>;
-		touchscreen-size-y = <480>;
-		vcc-supply = <&reg_vcc3v3>;
-	};
-};
-
-&lradc {
-	vref-supply = <&reg_ldo2>;
-	status = "okay";
-
-	button-571 {
-		label = "Volume Up";
-		linux,code = <KEY_VOLUMEUP>;
-		channel = <0>;
-		voltage = <571428>;
-	};
-
-	button-761 {
-		label = "Volume Down";
-		linux,code = <KEY_VOLUMEDOWN>;
-		channel = <0>;
-		voltage = <761904>;
-	};
-};
-
-&mmc0 {
-	vmmc-supply = <&reg_vcc3v3>;
-	bus-width = <4>;
-	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH01 */
-	status = "okay";
-};
-
-&ohci0 {
-	status = "okay";
-};
-
-&ohci1 {
-	status = "okay";
-};
-
-&otg_sram {
-	status = "okay";
-};
-
-&pio {
-	vcc-pb-supply = <&reg_vcc3v3>;
-	vcc-pf-supply = <&reg_vcc3v3>;
-	vcc-ph-supply = <&reg_vcc3v3>;
-};
-
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_pin>;
-	status = "okay";
-};
-
-&reg_dcdc2 {
-	regulator-always-on;
-	regulator-min-microvolt = <1000000>;
-	regulator-max-microvolt = <1400000>;
-	regulator-name = "vdd-cpu";
-};
-
-&reg_dcdc3 {
-	regulator-always-on;
-	regulator-min-microvolt = <1250000>;
-	regulator-max-microvolt = <1250000>;
-	regulator-name = "vdd-int-dll";
-};
-
-&reg_ldo1 {
-	regulator-name = "vdd-rtc";
-};
-
-&reg_ldo2 {
-	regulator-always-on;
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-	regulator-name = "avcc";
-};
-
-&reg_usb0_vbus {
-	status = "okay";
-};
-
-&reg_usb1_vbus {
-	status = "okay";
-};
-
-&reg_usb2_vbus {
-	status = "okay";
-};
-
-&tcon0_out {
-	tcon0_out_panel: endpoint@0 {
-		reg = <0>;
-		remote-endpoint = <&panel_input>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pb_pins>;
-	status = "okay";
-};
-
-&usb_otg {
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&usb_power_supply {
-	status = "okay";
-};
-
-&usbphy {
-	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
-	usb0_vbus-supply = <&reg_usb0_vbus>;
-	usb1_vbus-supply = <&reg_usb1_vbus>;
-	usb2_vbus-supply = <&reg_usb2_vbus>;
-	status = "okay";
-};