diff options
Diffstat (limited to 'arch/arm/dts/zynqmp-sck-kr-g-revA.dtso')
| -rw-r--r-- | arch/arm/dts/zynqmp-sck-kr-g-revA.dtso | 67 |
1 files changed, 48 insertions, 19 deletions
diff --git a/arch/arm/dts/zynqmp-sck-kr-g-revA.dtso b/arch/arm/dts/zynqmp-sck-kr-g-revA.dtso index 6349a0e1087..9d0c0c2885d 100644 --- a/arch/arm/dts/zynqmp-sck-kr-g-revA.dtso +++ b/arch/arm/dts/zynqmp-sck-kr-g-revA.dtso @@ -105,11 +105,19 @@ #address-cells = <1>; #size-cells = <0>; reg = <0>; + hub_1: usb-hub@2d { + compatible = "microchip,usb5744"; + reg = <0x2d>; + }; }; usbhub_i2c1: i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; + hub_2: usb-hub@2d { + compatible = "microchip,usb5744"; + reg = <0x2d>; + }; }; /* Bus 2/3 are not connected */ }; @@ -145,18 +153,6 @@ phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; reset-gpios = <&slg7xl45106 0 GPIO_ACTIVE_LOW>; assigned-clock-rates = <250000000>, <20000000>; -#if 0 - usbhub0: usb-hub { /* u43 */ - i2c-bus = <&usbhub_i2c0>; - compatible = "microchip,usb5744"; - reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>; - }; - - usb2244: usb-sd { /* u38 */ - compatible = "microchip,usb2244"; - reset-gpios = <&slg7xl45106 2 GPIO_ACTIVE_LOW>; - }; -#endif }; &dwc3_0 { @@ -164,6 +160,26 @@ dr_mode = "host"; snps,usb3_lpm_capable; maximum-speed = "super-speed"; + #address-cells = <1>; + #size-cells = <0>; + + /* 2.0 hub on port 1 */ + hub_2_0: hub@1 { + compatible = "usb424,2744"; + reg = <1>; + peer-hub = <&hub_3_0>; + i2c-bus = <&hub_1>; + reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>; + }; + + /* 3.0 hub on port 2 */ + hub_3_0: hub@2 { + compatible = "usb424,5744"; + reg = <2>; + peer-hub = <&hub_2_0>; + i2c-bus = <&hub_1>; + reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>; + }; }; &usb1 { /* mio64 - mio75 */ @@ -174,13 +190,6 @@ phys = <&psgtr 3 PHY_TYPE_USB3 1 2>; reset-gpios = <&slg7xl45106 1 GPIO_ACTIVE_LOW>; assigned-clock-rates = <250000000>, <20000000>; -#if 0 - usbhub1: usb-hub { /* u84 */ - i2c-bus = <&usbhub_i2c1>; - compatible = "microchip,usb5744"; - reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>; - }; -#endif }; &dwc3_1 { @@ -188,6 +197,26 @@ dr_mode = "host"; snps,usb3_lpm_capable; maximum-speed = "super-speed"; + #address-cells = <1>; + #size-cells = <0>; + + /* 2.0 hub on port 1 */ + hub1_2_0: hub@1 { + compatible = "usb424,2744"; + reg = <1>; + peer-hub = <&hub1_3_0>; + i2c-bus = <&hub_2>; + reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>; + }; + + /* 3.0 hub on port 2 */ + hub1_3_0: hub@2 { + compatible = "usb424,5744"; + reg = <2>; + peer-hub = <&hub1_2_0>; + i2c-bus = <&hub_2>; + reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>; + }; }; &gem0 { /* mdio mio50/51 */ |