diff options
Diffstat (limited to 'arch/arm/mach-davinci/da850_lowlevel.c')
| -rw-r--r-- | arch/arm/mach-davinci/da850_lowlevel.c | 30 |
1 files changed, 15 insertions, 15 deletions
diff --git a/arch/arm/mach-davinci/da850_lowlevel.c b/arch/arm/mach-davinci/da850_lowlevel.c index 759c93747c7..08c8f592524 100644 --- a/arch/arm/mach-davinci/da850_lowlevel.c +++ b/arch/arm/mach-davinci/da850_lowlevel.c @@ -185,9 +185,9 @@ static int da850_ddr_setup(void) setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_POWERDWN); } setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_IOPWRDWN); - writel(CONFIG_SYS_DA850_DDR2_DDRPHYCR, &dv_ddr2_regs_ctrl->ddrphycr); + writel(CFG_SYS_DA850_DDR2_DDRPHYCR, &dv_ddr2_regs_ctrl->ddrphycr); - if (CONFIG_SYS_DA850_DDR2_SDBCR & (1 << DV_DDR_SDCR_DDR2EN_SHIFT)) { + if (CFG_SYS_DA850_DDR2_SDBCR & (1 << DV_DDR_SDCR_DDR2EN_SHIFT)) { /* DDR2 */ clrbits_le32(&davinci_syscfg1_regs->ddr_slew, (1 << DDR_SLEW_DDR_PDENA_BIT) | @@ -211,19 +211,19 @@ static int da850_ddr_setup(void) * At the same time, set the TIMUNLOCK bit to allow changing * the timing registers */ - tmp = CONFIG_SYS_DA850_DDR2_SDBCR; + tmp = CFG_SYS_DA850_DDR2_SDBCR; tmp &= ~DV_DDR_BOOTUNLOCK; tmp |= DV_DDR_TIMUNLOCK; writel(tmp, &dv_ddr2_regs_ctrl->sdbcr); /* write memory configuration and timing */ - if (!(CONFIG_SYS_DA850_DDR2_SDBCR & (1 << DV_DDR_SDCR_DDR2EN_SHIFT))) { + if (!(CFG_SYS_DA850_DDR2_SDBCR & (1 << DV_DDR_SDCR_DDR2EN_SHIFT))) { /* MOBILE DDR only*/ - writel(CONFIG_SYS_DA850_DDR2_SDBCR2, + writel(CFG_SYS_DA850_DDR2_SDBCR2, &dv_ddr2_regs_ctrl->sdbcr2); } - writel(CONFIG_SYS_DA850_DDR2_SDTIMR, &dv_ddr2_regs_ctrl->sdtimr); - writel(CONFIG_SYS_DA850_DDR2_SDTIMR2, &dv_ddr2_regs_ctrl->sdtimr2); + writel(CFG_SYS_DA850_DDR2_SDTIMR, &dv_ddr2_regs_ctrl->sdtimr); + writel(CFG_SYS_DA850_DDR2_SDTIMR2, &dv_ddr2_regs_ctrl->sdtimr2); /* clear the TIMUNLOCK bit and write the value of the CL field */ tmp &= ~DV_DDR_TIMUNLOCK; @@ -233,7 +233,7 @@ static int da850_ddr_setup(void) * LPMODEN and MCLKSTOPEN must be set! * Without this bits set, PSC don;t switch states !! */ - writel(CONFIG_SYS_DA850_DDR2_SDRCR | + writel(CFG_SYS_DA850_DDR2_SDRCR | (1 << DV_DDR_SRCR_LPMODEN_SHIFT) | (1 << DV_DDR_SRCR_MCLKSTOPEN_SHIFT), &dv_ddr2_regs_ctrl->sdrcr); @@ -246,7 +246,7 @@ static int da850_ddr_setup(void) /* disable self refresh */ clrbits_le32(&dv_ddr2_regs_ctrl->sdrcr, DV_DDR_SDRCR_LPMODEN | DV_DDR_SDRCR_MCLKSTOPEN); - writel(CONFIG_SYS_DA850_DDR2_PBBPR, &dv_ddr2_regs_ctrl->pbbpr); + writel(CFG_SYS_DA850_DDR2_PBBPR, &dv_ddr2_regs_ctrl->pbbpr); return 0; } @@ -265,7 +265,7 @@ int arch_cpu_init(void) writel(DV_SYSCFG_KICK1_UNLOCK, &davinci_syscfg_regs->kick1); dv_maskbits(&davinci_syscfg_regs->suspsrc, - CONFIG_SYS_DA850_SYSCFG_SUSPSRC); + CFG_SYS_DA850_SYSCFG_SUSPSRC); /* configure pinmux settings */ if (davinci_configure_pin_mux_items(pinmuxes, pinmuxes_size)) @@ -273,8 +273,8 @@ int arch_cpu_init(void) #if defined(CONFIG_SYS_DA850_PLL_INIT) /* PLL setup */ - da850_pll_init(davinci_pllc0_regs, CONFIG_SYS_DA850_PLL0_PLLM); - da850_pll_init(davinci_pllc1_regs, CONFIG_SYS_DA850_PLL1_PLLM); + da850_pll_init(davinci_pllc0_regs, CFG_SYS_DA850_PLL0_PLLM); + da850_pll_init(davinci_pllc1_regs, CFG_SYS_DA850_PLL1_PLLM); #endif /* setup CSn config */ #if defined(CONFIG_SYS_DA850_CS2CFG) @@ -290,8 +290,8 @@ int arch_cpu_init(void) board_gpio_init(); #if !CONFIG_IS_ENABLED(DM_SERIAL) - ns16550_init((struct ns16550 *)(CONFIG_SYS_NS16550_COM1), - CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE); + ns16550_init((struct ns16550 *)(CFG_SYS_NS16550_COM1), + CFG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE); #endif /* * Fix Power and Emulation Management Register @@ -299,7 +299,7 @@ int arch_cpu_init(void) */ writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST | DAVINCI_UART_PWREMU_MGMT_UTRST), -#if (CONFIG_SYS_NS16550_COM1 == DAVINCI_UART0_BASE) +#if (CFG_SYS_NS16550_COM1 == DAVINCI_UART0_BASE) &davinci_uart0_ctrl_regs->pwremu_mgmt); #else &davinci_uart2_ctrl_regs->pwremu_mgmt); |