diff options
Diffstat (limited to 'arch/arm/mach-imx/imx9')
| -rw-r--r-- | arch/arm/mach-imx/imx9/Makefile | 2 | ||||
| -rw-r--r-- | arch/arm/mach-imx/imx9/clock.c | 4 | ||||
| -rw-r--r-- | arch/arm/mach-imx/imx9/lowlevel_init.S | 2 | ||||
| -rw-r--r-- | arch/arm/mach-imx/imx9/soc.c | 12 |
4 files changed, 10 insertions, 10 deletions
diff --git a/arch/arm/mach-imx/imx9/Makefile b/arch/arm/mach-imx/imx9/Makefile index e1b09ab5341..45a9105a75a 100644 --- a/arch/arm/mach-imx/imx9/Makefile +++ b/arch/arm/mach-imx/imx9/Makefile @@ -5,6 +5,6 @@ obj-y += lowlevel_init.o obj-y += soc.o clock.o clock_root.o trdc.o -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD obj-y += imx_bootaux.o #endif diff --git a/arch/arm/mach-imx/imx9/clock.c b/arch/arm/mach-imx/imx9/clock.c index 12685f970de..dda57ed7f55 100644 --- a/arch/arm/mach-imx/imx9/clock.c +++ b/arch/arm/mach-imx/imx9/clock.c @@ -640,7 +640,7 @@ void enable_usboh3_clk(unsigned char enable) } } -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void dram_pll_init(ulong pll_val) { configure_fracpll(DRAM_PLL_CLK, pll_val); @@ -950,7 +950,7 @@ int set_clk_enet(enum enet_freq type) /* * Dump some clockes. */ -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD int do_showclocks(struct cmd_tbl *cmdtp, int flag, int argc, char * const argv[]) { u32 freq; diff --git a/arch/arm/mach-imx/imx9/lowlevel_init.S b/arch/arm/mach-imx/imx9/lowlevel_init.S index 1dc1dbfcddc..97d85911041 100644 --- a/arch/arm/mach-imx/imx9/lowlevel_init.S +++ b/arch/arm/mach-imx/imx9/lowlevel_init.S @@ -16,7 +16,7 @@ rom_pointer: .global save_boot_params save_boot_params: -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* The firmware provided ATAG/FDT address can be found in r2/x0 */ adr x0, rom_pointer stp x1, x2, [x0], #16 diff --git a/arch/arm/mach-imx/imx9/soc.c b/arch/arm/mach-imx/imx9/soc.c index 04b21207a28..7c28fa39e14 100644 --- a/arch/arm/mach-imx/imx9/soc.c +++ b/arch/arm/mach-imx/imx9/soc.c @@ -383,7 +383,7 @@ int dram_init(void) return ret; /* rom_pointer[1] contains the size of TEE occupies */ - if (!IS_ENABLED(CONFIG_SPL_BUILD) && rom_pointer[1]) + if (!IS_ENABLED(CONFIG_XPL_BUILD) && rom_pointer[1]) gd->ram_size = sdram_size - rom_pointer[1]; else gd->ram_size = sdram_size; @@ -412,7 +412,7 @@ int dram_init_banksize(void) } gd->bd->bi_dram[bank].start = PHYS_SDRAM; - if (!IS_ENABLED(CONFIG_SPL_BUILD) && rom_pointer[1]) { + if (!IS_ENABLED(CONFIG_XPL_BUILD) && rom_pointer[1]) { phys_addr_t optee_start = (phys_addr_t)rom_pointer[0]; phys_size_t optee_size = (size_t)rom_pointer[1]; @@ -457,7 +457,7 @@ phys_size_t get_effective_memsize(void) else sdram_b1_size = sdram_size; - if (!IS_ENABLED(CONFIG_SPL_BUILD) && rom_pointer[1]) { + if (!IS_ENABLED(CONFIG_XPL_BUILD) && rom_pointer[1]) { /* We will relocate u-boot to top of dram1. TEE position has two cases: * 1. At the top of dram1, Then return the size removed optee size. * 2. In the middle of dram1, return the size of dram1. @@ -629,7 +629,7 @@ static int low_drive_freq_update(void *blob) } #ifdef CONFIG_OF_BOARD_FIXUP -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD int board_fix_fdt(void *fdt) { /* Update dtb clocks for low drive mode */ @@ -701,7 +701,7 @@ static void save_reset_cause(void) int arch_cpu_init(void) { - if (IS_ENABLED(CONFIG_SPL_BUILD)) { + if (IS_ENABLED(CONFIG_XPL_BUILD)) { /* Disable wdog */ init_wdog(); @@ -745,7 +745,7 @@ EVENT_SPY_SIMPLE(EVT_DM_POST_INIT_R, imx9_probe_mu); int timer_init(void) { -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD struct sctr_regs *sctr = (struct sctr_regs *)SYSCNT_CTRL_BASE_ADDR; unsigned long freq = readl(&sctr->cntfid0); |