1 files changed, 0 insertions, 67 deletions
diff --git a/arch/arm/mach-meson/board-g12a.c b/arch/arm/mach-meson/board-g12a.c
index bb75d4f8ad3..2e59eee8f79 100644
--- a/arch/arm/mach-meson/board-g12a.c
+++ b/arch/arm/mach-meson/board-g12a.c
@@ -97,73 +97,6 @@ static struct mm_region g12a_mem_map[] = {
 
 struct mm_region *mem_map = g12a_mem_map;
 
-static void g12a_enable_external_mdio(void)
-{
-	writel(0x0, ETH_PHY_CNTL2);
-}
-
-static void g12a_enable_internal_mdio(void)
-{
-	/* Fire up the PHY PLL */
-	writel(0x29c0040a, ETH_PLL_CNTL0);
-	writel(0x927e0000, ETH_PLL_CNTL1);
-	writel(0xac5f49e5, ETH_PLL_CNTL2);
-	writel(0x00000000, ETH_PLL_CNTL3);
-	writel(0x00000000, ETH_PLL_CNTL4);
-	writel(0x20200000, ETH_PLL_CNTL5);
-	writel(0x0000c002, ETH_PLL_CNTL6);
-	writel(0x00000023, ETH_PLL_CNTL7);
-	writel(0x39c0040a, ETH_PLL_CNTL0);
-	writel(0x19c0040a, ETH_PLL_CNTL0);
-
-	/* Select the internal MDIO */
-	writel(0x33000180, ETH_PHY_CNTL0);
-	writel(0x00074043, ETH_PHY_CNTL1);
-	writel(0x00000260, ETH_PHY_CNTL2);
-}
-
-/* Configure the Ethernet MAC with the requested interface mode
- * with some optional flags.
- */
-void meson_eth_init(phy_interface_t mode, unsigned int flags)
-{
-	switch (mode) {
-	case PHY_INTERFACE_MODE_RGMII:
-	case PHY_INTERFACE_MODE_RGMII_ID:
-	case PHY_INTERFACE_MODE_RGMII_RXID:
-	case PHY_INTERFACE_MODE_RGMII_TXID:
-		/* Set RGMII mode */
-		setbits_le32(G12A_ETH_REG_0, G12A_ETH_REG_0_PHY_INTF_RGMII |
-			     G12A_ETH_REG_0_TX_PHASE(1) |
-			     G12A_ETH_REG_0_TX_RATIO(4) |
-			     G12A_ETH_REG_0_PHY_CLK_EN |
-			     G12A_ETH_REG_0_CLK_EN);
-		g12a_enable_external_mdio();
-		break;
-
-	case PHY_INTERFACE_MODE_RMII:
-		/* Set RMII mode */
-		out_le32(G12A_ETH_REG_0, G12A_ETH_REG_0_PHY_INTF_RMII |
-					G12A_ETH_REG_0_INVERT_RMII_CLK |
-					G12A_ETH_REG_0_CLK_EN);
-
-		/* Use G12A RMII Internal PHY */
-		if (flags & MESON_USE_INTERNAL_RMII_PHY)
-			g12a_enable_internal_mdio();
-		else
-			g12a_enable_external_mdio();
-
-		break;
-
-	default:
-		printf("Invalid Ethernet interface mode\n");
-		return;
-	}
-
-	/* Enable power gate */
-	clrbits_le32(G12A_MEM_PD_REG_0, G12A_MEM_PD_REG_0_ETH_MASK);
-}
-
 #if CONFIG_IS_ENABLED(USB_DWC3_MESON_G12A) && \
 	CONFIG_IS_ENABLED(USB_GADGET_DWC2_OTG)
 static struct dwc2_plat_otg_data meson_g12a_dwc2_data;