1 files changed, 93 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/am33xx/emif4.c b/arch/arm/mach-omap2/am33xx/emif4.c
new file mode 100644
index 00000000000..b29250b8d20
--- /dev/null
+++ b/arch/arm/mach-omap2/am33xx/emif4.c
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * emif4.c
+ *
+ * AM33XX emif4 configuration file
+ *
+ * Copyright (C) 2011, Texas Instruments, Incorporated - https://www.ti.com/
+ */
+
+#include <common.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/ddr_defs.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/io.h>
+#include <asm/emif.h>
+
+static struct vtp_reg *vtpreg[2] = {
+				(struct vtp_reg *)VTP0_CTRL_ADDR,
+				(struct vtp_reg *)VTP1_CTRL_ADDR};
+#ifdef CONFIG_AM33XX
+static struct ddr_ctrl *ddrctrl = (struct ddr_ctrl *)DDR_CTRL_ADDR;
+#endif
+#ifdef CONFIG_AM43XX
+static struct ddr_ctrl *ddrctrl = (struct ddr_ctrl *)DDR_CTRL_ADDR;
+static struct cm_device_inst *cm_device =
+				(struct cm_device_inst *)CM_DEVICE_INST;
+#endif
+
+static void config_vtp(int nr)
+{
+	writel(readl(&vtpreg[nr]->vtp0ctrlreg) | VTP_CTRL_ENABLE,
+			&vtpreg[nr]->vtp0ctrlreg);
+	writel(readl(&vtpreg[nr]->vtp0ctrlreg) & (~VTP_CTRL_START_EN),
+			&vtpreg[nr]->vtp0ctrlreg);
+	writel(readl(&vtpreg[nr]->vtp0ctrlreg) | VTP_CTRL_START_EN,
+			&vtpreg[nr]->vtp0ctrlreg);
+
+	/* Poll for READY */
+	while ((readl(&vtpreg[nr]->vtp0ctrlreg) & VTP_CTRL_READY) !=
+			VTP_CTRL_READY)
+		;
+}
+
+void __weak ddr_pll_config(unsigned int ddrpll_m)
+{
+}
+
+void config_ddr(unsigned int pll, const struct ctrl_ioregs *ioregs,
+		const struct ddr_data *data, const struct cmd_control *ctrl,
+		const struct emif_regs *regs, int nr)
+{
+	ddr_pll_config(pll);
+	config_vtp(nr);
+	config_cmd_ctrl(ctrl, nr);
+
+	config_ddr_data(data, nr);
+#ifdef CONFIG_AM33XX
+	config_io_ctrl(ioregs);
+
+	/* Set CKE to be controlled by EMIF/DDR PHY */
+	writel(DDR_CKE_CTRL_NORMAL, &ddrctrl->ddrckectrl);
+
+#endif
+#ifdef CONFIG_AM43XX
+	writel(readl(&cm_device->cm_dll_ctrl) & ~0x1, &cm_device->cm_dll_ctrl);
+	while ((readl(&cm_device->cm_dll_ctrl) & CM_DLL_READYST) == 0)
+		;
+
+	config_io_ctrl(ioregs);
+
+	/* Set CKE to be controlled by EMIF/DDR PHY */
+	writel(DDR_CKE_CTRL_NORMAL, &ddrctrl->ddrckectrl);
+
+	if (emif_sdram_type(regs->sdram_config) == EMIF_SDRAM_TYPE_DDR3)
+#ifndef CONFIG_SPL_RTC_DDR_SUPPORT
+		/* Allow EMIF to control DDR_RESET */
+		writel(0x00000000, &ddrctrl->ddrioctrl);
+#else
+		/* Override EMIF DDR_RESET control */
+		writel(0x80000000, &ddrctrl->ddrioctrl);
+#endif /* CONFIG_SPL_RTC_DDR_SUPPORT */
+#endif
+
+	/* Program EMIF instance */
+	config_ddr_phy(regs, nr);
+	set_sdram_timings(regs, nr);
+	if (get_emif_rev(EMIF1_BASE) == EMIF_4D5)
+		config_sdram_emif4d5(regs, nr);
+	else
+		config_sdram(regs, nr);
+}