diff options
Diffstat (limited to 'arch/arm/mach-socfpga/board.c')
| -rw-r--r-- | arch/arm/mach-socfpga/board.c | 184 |
1 files changed, 184 insertions, 0 deletions
diff --git a/arch/arm/mach-socfpga/board.c b/arch/arm/mach-socfpga/board.c new file mode 100644 index 00000000000..feaf5ce4596 --- /dev/null +++ b/arch/arm/mach-socfpga/board.c @@ -0,0 +1,184 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Altera SoCFPGA common board code + * + * Copyright (C) 2015 Marek Vasut <marex@denx.de> + */ + +#include <config.h> +#include <asm/arch/clock_manager.h> +#include <asm/arch/mailbox_s10.h> +#include <asm/arch/misc.h> +#include <asm/arch/reset_manager.h> +#include <asm/arch/secure_vab.h> +#include <asm/arch/smc_api.h> +#include <asm/global_data.h> +#include <asm/io.h> +#include <errno.h> +#include <fdtdec.h> +#include <hang.h> +#include <image.h> +#include <init.h> +#include <log.h> +#include <usb.h> +#include <usb/dwc2_udc.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define DEFAULT_JTAG_USERCODE 0xFFFFFFFF + +void s_init(void) { +#ifndef CONFIG_ARM64 + /* + * Preconfigure ACTLR and CPACR, make sure Write Full Line of Zeroes + * is disabled in ACTLR. + * This is optional on CycloneV / ArriaV. + * This is mandatory on Arria10, otherwise Linux refuses to boot. + */ + asm volatile( + "mcr p15, 0, %0, c1, c0, 1\n" + "mcr p15, 0, %0, c1, c0, 2\n" + "isb\n" + "dsb\n" + ::"r"(0x0)); +#endif +} + +/* + * Miscellaneous platform dependent initialisations + */ +int board_init(void) +{ + /* Address of boot parameters for ATAG (if ATAG is used) */ + gd->bd->bi_boot_params = CFG_SYS_SDRAM_BASE + 0x100; + + return 0; +} + +int dram_init_banksize(void) +{ + fdtdec_setup_memory_banksize(); + + return 0; +} + +#ifdef CONFIG_USB_GADGET +struct dwc2_plat_otg_data socfpga_otg_data = { + .usb_gusbcfg = 0x1417, +}; + +int board_usb_init(int index, enum usb_init_type init) +{ + int node[2], count; + fdt_addr_t addr; + + count = fdtdec_find_aliases_for_id(gd->fdt_blob, "udc", + COMPAT_ALTERA_SOCFPGA_DWC2USB, + node, 2); + if (count <= 0) /* No controller found. */ + return 0; + + addr = fdtdec_get_addr(gd->fdt_blob, node[0], "reg"); + if (addr == FDT_ADDR_T_NONE) { + printf("UDC Controller has no 'reg' property!\n"); + return -EINVAL; + } + + /* Patch the address from OF into the controller pdata. */ + socfpga_otg_data.regs_otg = addr; + + return dwc2_udc_probe(&socfpga_otg_data); +} + +int g_dnl_board_usb_cable_connected(void) +{ + return 1; +} +#endif + +u8 socfpga_get_board_id(void) +{ + u8 board_id = 0; + u32 jtag_usercode; + int err; + +#if !IS_ENABLED(CONFIG_SPL_BUILD) && IS_ENABLED(CONFIG_SPL_ATF) + err = smc_get_usercode(&jtag_usercode); +#else + u32 resp_len = 1; + + err = mbox_send_cmd(MBOX_ID_UBOOT, MBOX_GET_USERCODE, MBOX_CMD_DIRECT, 0, + NULL, 0, &resp_len, &jtag_usercode); +#endif + + if (err) { + puts("Fail to read JTAG Usercode. Default Board ID to 0\n"); + return board_id; + } + + debug("Valid JTAG Usercode: %u\n", jtag_usercode); + + if (jtag_usercode == DEFAULT_JTAG_USERCODE) { + debug("JTAG Usercode is not set. Default Board ID to 0\n"); + } else if (jtag_usercode >= 0 && jtag_usercode <= 255) { + board_id = jtag_usercode; + debug("Valid JTAG Usercode. Set Board ID to %u\n", board_id); + } else { + puts("Board ID is not in range 0 to 255\n"); + } + + return board_id; +} + +#if IS_ENABLED(CONFIG_SPL_BUILD) && IS_ENABLED(CONFIG_TARGET_SOCFPGA_SOC64) +int board_fit_config_name_match(const char *name) +{ + char board_name[10]; + + sprintf(board_name, "board_%u", socfpga_get_board_id()); + + debug("Board name: %s\n", board_name); + + return strcmp(name, board_name); +} +#endif + +#if IS_ENABLED(CONFIG_FIT_IMAGE_POST_PROCESS) +void board_fit_image_post_process(const void *fit, int node, void **p_image, + size_t *p_size) +{ + if (IS_ENABLED(CONFIG_SOCFPGA_SECURE_VAB_AUTH)) { + if (socfpga_vendor_authentication(p_image, p_size)) + hang(); + } +} +#endif + +#if !IS_ENABLED(CONFIG_SPL_BUILD) && IS_ENABLED(CONFIG_FIT) +void board_prep_linux(struct bootm_headers *images) +{ + bool use_fit = false; + + if (!images->fit_uname_cfg) { + if (IS_ENABLED(CONFIG_SOCFPGA_SECURE_VAB_AUTH) && + !IS_ENABLED(CONFIG_SOCFPGA_SECURE_VAB_AUTH_ALLOW_NON_FIT_IMAGE)) { + /* + * Ensure the OS is always booted from FIT and with + * VAB signed certificate + */ + printf("Please use FIT with VAB signed images!\n"); + hang(); + } + } else { + use_fit = true; + /* Update fdt_addr in enviroment variable */ + env_set_hex("fdt_addr", (ulong)images->ft_addr); + debug("images->ft_addr = 0x%08lx\n", (ulong)images->ft_addr); + } + + if (use_fit && IS_ENABLED(CONFIG_CADENCE_QSPI)) { + if (env_get("linux_qspi_enable")) + run_command(env_get("linux_qspi_enable"), 0); + } +} +#endif |