3 files changed, 7 insertions, 7 deletions
diff --git a/arch/arm/mach-stm32mp/stm32mp1/Makefile b/arch/arm/mach-stm32mp/stm32mp1/Makefile
index ebae50f66c9..db160c24cbc 100644
--- a/arch/arm/mach-stm32mp/stm32mp1/Makefile
+++ b/arch/arm/mach-stm32mp/stm32mp1/Makefile
@@ -8,12 +8,12 @@ obj-y += cpu.o
 obj-$(CONFIG_STM32MP13X) += stm32mp13x.o
 obj-$(CONFIG_STM32MP15X) += stm32mp15x.o
 
-ifdef CONFIG_SPL_BUILD
+ifdef CONFIG_XPL_BUILD
 obj-y += spl.o
 obj-y += tzc400.o
 else
 obj-$(CONFIG_ARMV7_PSCI) += psci.o
 endif
 
-obj-$(CONFIG_$(SPL_)STM32MP15_PWR) += pwr_regulator.o
+obj-$(CONFIG_$(XPL_)STM32MP15_PWR) += pwr_regulator.o
 obj-$(CONFIG_OF_SYSTEM_SETUP) += fdt.o
diff --git a/arch/arm/mach-stm32mp/stm32mp1/cpu.c b/arch/arm/mach-stm32mp/stm32mp1/cpu.c
index 64480da9f8d..26c073f06a0 100644
--- a/arch/arm/mach-stm32mp/stm32mp1/cpu.c
+++ b/arch/arm/mach-stm32mp/stm32mp1/cpu.c
@@ -57,7 +57,7 @@ void dram_bank_mmu_setup(int bank)
 	bool use_lmb = false;
 	enum dcache_option option;
 
-	if (IS_ENABLED(CONFIG_SPL_BUILD)) {
+	if (IS_ENABLED(CONFIG_XPL_BUILD)) {
 /* STM32_SYSRAM_BASE exist only when SPL is supported */
 #ifdef CONFIG_SPL
 		start = ALIGN_DOWN(STM32_SYSRAM_BASE, MMU_SECTION_SIZE);
@@ -133,7 +133,7 @@ int mach_cpu_init(void)
 	if (IS_ENABLED(CONFIG_CMD_STM32PROG_SERIAL) &&
 	    (boot_mode & TAMP_BOOT_DEVICE_MASK) == BOOT_SERIAL_UART)
 		gd->flags |= GD_FLG_SILENT | GD_FLG_DISABLE_CONSOLE;
-	else if (IS_ENABLED(CONFIG_DEBUG_UART) && IS_ENABLED(CONFIG_SPL_BUILD))
+	else if (IS_ENABLED(CONFIG_DEBUG_UART) && IS_ENABLED(CONFIG_XPL_BUILD))
 		debug_uart_init();
 
 	return 0;
@@ -339,7 +339,7 @@ uintptr_t get_stm32mp_bl2_dtb(void)
 	return nt_fw_dtb;
 }
 
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
 void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
 {
 	typedef void __noreturn (*image_entry_stm32_t)(u32 romapi);
diff --git a/arch/arm/mach-stm32mp/stm32mp1/stm32mp15x.c b/arch/arm/mach-stm32mp/stm32mp1/stm32mp15x.c
index ca202bec8ee..4f1d783649b 100644
--- a/arch/arm/mach-stm32mp/stm32mp1/stm32mp15x.c
+++ b/arch/arm/mach-stm32mp/stm32mp1/stm32mp15x.c
@@ -214,13 +214,13 @@ static void update_bootmode(void)
 /* weak function: STM32MP15x mach init for boot without TFA */
 void stm32mp_cpu_init(void)
 {
-	if (IS_ENABLED(CONFIG_SPL_BUILD)) {
+	if (IS_ENABLED(CONFIG_XPL_BUILD)) {
 		security_init();
 		update_bootmode();
 	}
 
 	/* reset copro state in SPL, when used, or in U-Boot */
-	if (!IS_ENABLED(CONFIG_SPL) || IS_ENABLED(CONFIG_SPL_BUILD)) {
+	if (!IS_ENABLED(CONFIG_SPL) || IS_ENABLED(CONFIG_XPL_BUILD)) {
 		/* Reset Coprocessor state unless it wakes up from Standby power mode */
 		if (!(readl(PWR_MCUCR) & PWR_MCUCR_SBF)) {
 			writel(TAMP_COPRO_STATE_OFF, TAMP_COPRO_STATE);