diff options
Diffstat (limited to 'arch/arm/mach-sunxi/Kconfig')
| -rw-r--r-- | arch/arm/mach-sunxi/Kconfig | 42 |
1 files changed, 26 insertions, 16 deletions
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 9d5df2c1027..40ca7d7b3a9 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -121,7 +121,7 @@ config AXP_PMIC_BUS config SUNXI_SRAM_ADDRESS hex default 0x10000 if MACH_SUN9I || MACH_SUN50I || MACH_SUN50I_H5 - default 0x20000 if SUN50I_GEN_H6 + default 0x20000 if SUN50I_GEN_H6 || SUNXI_GEN_NCAT2 default 0x0 ---help--- Older Allwinner SoCs have their mask boot ROM mapped just below 4GB, @@ -183,6 +183,14 @@ config SUN50I_GEN_H6 Select this for sunxi SoCs which have H6 like peripherals, clocks and memory map. +config SUNXI_GEN_NCAT2 + bool + select MMC_SUNXI_HAS_NEW_MODE + select SUPPORT_SPL + ---help--- + Select this for sunxi SoCs which have D1 like peripherals, clocks + and memory map. + config SUNXI_DRAM_DW bool ---help--- @@ -338,6 +346,19 @@ config MACH_SUN8I_R40 select SUNXI_DRAM_DW_32BIT imply SPL_SYS_I2C_LEGACY +config MACH_SUN8I_R528 + bool "sun8i (Allwinner R528)" + select CPU_V7A + select CPU_V7_HAS_NONSEC + select CPU_V7_HAS_VIRT + select ARCH_SUPPORT_PSCI + select SPL_ARMV7_SET_CORTEX_SMPEN + select SUNXI_GEN_NCAT2 + select SUNXI_NEW_PINCTRL + select MMC_SUNXI_HAS_NEW_MODE + select SUPPORT_SPL + select DRAM_SUN20I_D1 + config MACH_SUN8I_V3S bool "sun8i (Allwinner V3/V3s/S3/S3L)" select CPU_V7A @@ -648,6 +669,7 @@ config SYS_CLK_FREQ default 1008000000 if MACH_SUN9I default 888000000 if MACH_SUN50I_H6 default 1008000000 if MACH_SUN50I_H616 + default 1008000000 if MACH_SUN8I_R528 config SYS_CONFIG_NAME default "suniv" if MACH_SUNIV @@ -656,6 +678,7 @@ config SYS_CONFIG_NAME default "sun6i" if MACH_SUN6I default "sun7i" if MACH_SUN7I default "sun8i" if MACH_SUN8I + default "sun8i" if MACH_SUN8I_R528 default "sun9i" if MACH_SUN9I default "sun50i" if MACH_SUN50I default "sun50i" if MACH_SUN50I_H6 @@ -695,13 +718,6 @@ config OLD_SUNXI_KERNEL_COMPAT Set this to enable various workarounds for old kernels, this results in sub-optimal settings for newer kernels, only enable if needed. -config MACPWR - string "MAC power pin" - default "" - help - Set the pin used to power the MAC. This takes a string in the format - understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H. - config MMC1_PINS_PH bool "Pins for mmc1 are on Port H" depends on MACH_SUN4I || MACH_SUN7I || MACH_SUN8I_R40 @@ -811,6 +827,7 @@ config VIDEO_SUNXI depends on !MACH_SUN9I depends on !MACH_SUN50I depends on !SUN50I_GEN_H6 + depends on !SUNXI_GEN_NCAT2 select VIDEO select DISPLAY imply VIDEO_DT_SIMPLEFB @@ -1008,14 +1025,6 @@ config VIDEO_LCD_TL059WV5C0 endchoice -config SATAPWR - string "SATA power pin" - default "" - help - Set the pins used to power the SATA. This takes a string in the - format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of - port H. - config GMAC_TX_DELAY int "GMAC Transmit Clock Delay Chain" default 0 @@ -1032,6 +1041,7 @@ config SPL_STACK_R_ADDR default 0x2fe00000 if MACH_SUN9I default 0x4fe00000 if MACH_SUN50I default 0x4fe00000 if SUN50I_GEN_H6 + default 0x4fe00000 if SUNXI_GEN_NCAT2 config SPL_SPI_SUNXI bool "Support for SPI Flash on Allwinner SoCs in SPL" |