diff options
Diffstat (limited to 'arch/arm')
189 files changed, 3805 insertions, 7678 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 7282c4123b0..3ed9494dfe4 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -7,6 +7,7 @@ config SYS_ARCH config ARM64 bool select 64BIT + select SPL_64BIT if SPL select PHYS_64BIT select SYS_CACHE_SHIFT_6 imply SPL_SEPARATE_BSS @@ -1177,7 +1178,6 @@ config ARCH_SUNXI select SUNXI_GPIO select SYS_NS16550 select SYS_THUMB_BUILD if !ARM64 - select USB if DISTRO_DEFAULTS select USB_KEYBOARD if DISTRO_DEFAULTS && USB_HOST select USB_STORAGE if DISTRO_DEFAULTS && USB_HOST select SPL_USE_TINY_PRINTF if SPL @@ -1203,6 +1203,7 @@ config ARCH_SUNXI imply SYSRESET imply SYSRESET_WATCHDOG imply SYSRESET_WATCHDOG_AUTO + imply USB imply USB_GADGET imply WDT @@ -1324,6 +1325,7 @@ config ARCH_ZYNQMP_R5 config ARCH_ZYNQMP bool "Xilinx ZynqMP based platform" select ARM64 + select BINMAN select CLK select DM select DEBUG_UART_BOARD_INIT if SPL && DEBUG_UART diff --git a/arch/arm/cpu/armv8/cache_v8.c b/arch/arm/cpu/armv8/cache_v8.c index e6be6359c5d..5d6953ffedd 100644 --- a/arch/arm/cpu/armv8/cache_v8.c +++ b/arch/arm/cpu/armv8/cache_v8.c @@ -825,7 +825,7 @@ void dcache_enable(void) void dcache_disable(void) { - uint32_t sctlr; + unsigned long sctlr; sctlr = get_sctlr(); diff --git a/arch/arm/cpu/armv8/cpu.c b/arch/arm/cpu/armv8/cpu.c index d568efa427a..82ecf02f4b0 100644 --- a/arch/arm/cpu/armv8/cpu.c +++ b/arch/arm/cpu/armv8/cpu.c @@ -94,3 +94,8 @@ void armv8_setup_psci(void) secure_ram_addr(psci_arch_init)(); } #endif + +void allow_unaligned(void) +{ + set_sctlr(get_sctlr() & ~CR_A); +} diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index b92e5ce6d99..23b537a2fcb 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -190,7 +190,8 @@ dtb-$(CONFIG_ARCH_MVEBU) += \ cn9130-crb-A.dtb \ cn9130-crb-B.dtb \ ac5-98dx35xx-rd.dtb \ - ac5-98dx35xx-atl-x240.dtb + ac5-98dx35xx-atl-x240.dtb \ + cn9130-atl-x250.dtb endif dtb-$(CONFIG_ARCH_SYNQUACER) += synquacer-sc2a11-developerbox.dtb @@ -274,6 +275,7 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += \ zynqmp-mini-qspi-x1-stacked.dtb \ zynqmp-mini-qspi-x2-single.dtb \ zynqmp-mini-qspi-x2-stacked.dtb \ + zynqmp-binman-mini.dtb \ zynqmp-sc-revB.dtb \ zynqmp-sc-revC.dtb \ zynqmp-sm-k24-revA.dtb \ @@ -319,6 +321,7 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-p-a2197-00-revA-x-prc-02-revA.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-p-a2197-00-revA-x-prc-03-revA.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-p-a2197-00-revA-x-prc-04-revA.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-p-a2197-00-revA-x-prc-05-revA.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-binman.dtb zynqmp-sc-vek280-revA-dtbs := zynqmp-sc-revB.dtb zynqmp-sc-vek280-revA.dtbo zynqmp-sc-vek280-revB-dtbs := zynqmp-sc-revC.dtb zynqmp-sc-vek280-revB.dtbo @@ -369,6 +372,7 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k24-revA-sck-kv-g-revB.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k24-revA-sck-kv-g-revB.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k24-revA-sck-kr-g-revB.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k24-revA-sck-kr-g-revB.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-binman-som.dtb dtb-$(CONFIG_ARCH_VERSAL) += \ versal-mini.dtb \ @@ -935,8 +939,7 @@ dtb-$(CONFIG_ARCH_IMX8) += \ fsl-imx8qxp-ai_ml.dtb \ fsl-imx8qxp-colibri.dtb \ fsl-imx8qxp-mek.dtb \ - imx8-deneb.dtb \ - imx8-giedi.dtb + imx8-capricorn-cxg3.dtb \ dtb-$(CONFIG_ARCH_IMX8ULP) += \ imx8ulp-evk.dtb @@ -975,10 +978,6 @@ dtb-$(CONFIG_ARCH_IMXRT) += imxrt1050-evk.dtb \ imxrt1020-evk.dtb \ imxrt1170-evk.dtb \ -ifdef CONFIG_RCAR_64 -DTC_FLAGS += -R 4 -p 0x1000 -endif - dtb-$(CONFIG_RZA1) += \ r7s72100-gr-peach.dtb @@ -1156,14 +1155,11 @@ dtb-$(CONFIG_STM32MP25X) += \ stm32mp257f-ev1.dtb dtb-$(CONFIG_SOC_K3_AM654) += \ - k3-am654-base-board.dtb \ - k3-am654-r5-base-board.dtb \ - k3-am654-icssg2.dtbo + k3-am654-r5-base-board.dtb dtb-$(CONFIG_SOC_K3_J721E) += k3-j721e-r5-common-proc-board.dtb \ k3-j7200-r5-common-proc-board.dtb \ k3-j721e-r5-sk.dtb \ - k3-j721e-beagleboneai64.dtb \ k3-j721e-r5-beagleboneai64.dtb dtb-$(CONFIG_SOC_K3_J721S2) += k3-am68-sk-r5-base-board.dtb\ diff --git a/arch/arm/dts/bcm47622.dtsi b/arch/arm/dts/bcm47622.dtsi deleted file mode 100644 index c016e12b737..00000000000 --- a/arch/arm/dts/bcm47622.dtsi +++ /dev/null @@ -1,126 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright 2022 Broadcom Ltd. - */ - -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/interrupt-controller/irq.h> - -/ { - compatible = "brcm,bcm47622", "brcm,bcmbca"; - #address-cells = <1>; - #size-cells = <1>; - - interrupt-parent = <&gic>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - CA7_0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x0>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - }; - - CA7_1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x1>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - }; - CA7_2: cpu@2 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x2>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - }; - CA7_3: cpu@3 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x3>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - }; - L2_0: l2-cache0 { - compatible = "cache"; - }; - }; - - timer { - compatible = "arm,armv7-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; - arm,cpu-registers-not-fw-configured; - }; - - pmu: pmu { - compatible = "arm,cortex-a7-pmu"; - interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&CA7_0>, <&CA7_1>, - <&CA7_2>, <&CA7_3>; - }; - - clocks: clocks { - periph_clk: periph-clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <200000000>; - }; - uart_clk: uart-clk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clocks = <&periph_clk>; - clock-div = <4>; - clock-mult = <1>; - }; - }; - - psci { - compatible = "arm,psci-0.2"; - method = "smc"; - cpu_off = <1>; - cpu_on = <2>; - }; - - axi@81000000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x81000000 0x818000>; - - gic: interrupt-controller@1000 { - compatible = "arm,cortex-a7-gic"; - #interrupt-cells = <3>; - #address-cells = <0>; - interrupt-controller; - reg = <0x1000 0x1000>, - <0x2000 0x2000>; - }; - }; - - bus@ff800000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0xff800000 0x800000>; - - uart0: serial@12000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x12000 0x1000>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&uart_clk>, <&uart_clk>; - clock-names = "uartclk", "apb_pclk"; - status = "disabled"; - }; - }; -}; diff --git a/arch/arm/dts/bcm4912.dtsi b/arch/arm/dts/bcm4912.dtsi deleted file mode 100644 index 3d016c2ce67..00000000000 --- a/arch/arm/dts/bcm4912.dtsi +++ /dev/null @@ -1,128 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright 2022 Broadcom Ltd. - */ - -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> - -/ { - compatible = "brcm,bcm4912", "brcm,bcmbca"; - #address-cells = <2>; - #size-cells = <2>; - - interrupt-parent = <&gic>; - - cpus { - #address-cells = <2>; - #size-cells = <0>; - - B53_0: cpu@0 { - compatible = "brcm,brahma-b53"; - device_type = "cpu"; - reg = <0x0 0x0>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - }; - - B53_1: cpu@1 { - compatible = "brcm,brahma-b53"; - device_type = "cpu"; - reg = <0x0 0x1>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - }; - - B53_2: cpu@2 { - compatible = "brcm,brahma-b53"; - device_type = "cpu"; - reg = <0x0 0x2>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - }; - - B53_3: cpu@3 { - compatible = "brcm,brahma-b53"; - device_type = "cpu"; - reg = <0x0 0x3>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - }; - - L2_0: l2-cache0 { - compatible = "cache"; - }; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; - }; - - pmu: pmu { - compatible = "arm,cortex-a53-pmu"; - interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&B53_0>, <&B53_1>, - <&B53_2>, <&B53_3>; - }; - - clocks: clocks { - periph_clk: periph-clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <200000000>; - }; - uart_clk: uart-clk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clocks = <&periph_clk>; - clock-div = <4>; - clock-mult = <1>; - }; - }; - - psci { - compatible = "arm,psci-0.2"; - method = "smc"; - }; - - axi@81000000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x0 0x81000000 0x8000>; - - gic: interrupt-controller@1000 { - compatible = "arm,gic-400"; - #interrupt-cells = <3>; - interrupt-controller; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; - reg = <0x1000 0x1000>, - <0x2000 0x2000>, - <0x4000 0x2000>, - <0x6000 0x2000>; - }; - }; - - bus@ff800000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x0 0xff800000 0x800000>; - - uart0: serial@12000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x12000 0x1000>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&uart_clk>, <&uart_clk>; - clock-names = "uartclk", "apb_pclk"; - status = "disabled"; - }; - }; -}; diff --git a/arch/arm/dts/bcm63146.dtsi b/arch/arm/dts/bcm63146.dtsi deleted file mode 100644 index 04de96bd0a0..00000000000 --- a/arch/arm/dts/bcm63146.dtsi +++ /dev/null @@ -1,110 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright 2022 Broadcom Ltd. - */ - -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> - -/ { - compatible = "brcm,bcm63146", "brcm,bcmbca"; - #address-cells = <2>; - #size-cells = <2>; - - interrupt-parent = <&gic>; - - cpus { - #address-cells = <2>; - #size-cells = <0>; - - B53_0: cpu@0 { - compatible = "brcm,brahma-b53"; - device_type = "cpu"; - reg = <0x0 0x0>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - }; - - B53_1: cpu@1 { - compatible = "brcm,brahma-b53"; - device_type = "cpu"; - reg = <0x0 0x1>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - }; - - L2_0: l2-cache0 { - compatible = "cache"; - }; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; - }; - - pmu: pmu { - compatible = "arm,cortex-a53-pmu"; - interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&B53_0>, <&B53_1>; - }; - - clocks: clocks { - periph_clk: periph-clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <200000000>; - }; - uart_clk: uart-clk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clocks = <&periph_clk>; - clock-div = <4>; - clock-mult = <1>; - }; - }; - - psci { - compatible = "arm,psci-0.2"; - method = "smc"; - }; - - axi@81000000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x0 0x81000000 0x8000>; - - gic: interrupt-controller@1000 { - compatible = "arm,gic-400"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x1000 0x1000>, - <0x2000 0x2000>, - <0x4000 0x2000>, - <0x6000 0x2000>; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | - IRQ_TYPE_LEVEL_HIGH)>; - }; - }; - - bus@ff800000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x0 0xff800000 0x800000>; - - uart0: serial@12000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x12000 0x1000>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&uart_clk>, <&uart_clk>; - clock-names = "uartclk", "apb_pclk"; - status = "disabled"; - }; - }; -}; diff --git a/arch/arm/dts/bcm63158.dtsi b/arch/arm/dts/bcm63158.dtsi deleted file mode 100644 index 4bed1f914a9..00000000000 --- a/arch/arm/dts/bcm63158.dtsi +++ /dev/null @@ -1,278 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2019 Philippe Reynes <philippe.reynes@softathome.com> - * Copyright 2022 Broadcom Ltd. - */ - -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> - -/ { - compatible = "brcm,bcm63158", "brcm,bcmbca"; - #address-cells = <2>; - #size-cells = <2>; - - interrupt-parent = <&gic>; - - cpus { - #address-cells = <2>; - #size-cells = <0>; - - B53_0: cpu@0 { - compatible = "brcm,brahma-b53"; - device_type = "cpu"; - reg = <0x0 0x0>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - }; - - B53_1: cpu@1 { - compatible = "brcm,brahma-b53"; - device_type = "cpu"; - reg = <0x0 0x1>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - }; - - B53_2: cpu@2 { - compatible = "brcm,brahma-b53"; - device_type = "cpu"; - reg = <0x0 0x2>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - }; - - B53_3: cpu@3 { - compatible = "brcm,brahma-b53"; - device_type = "cpu"; - reg = <0x0 0x3>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - }; - - L2_0: l2-cache0 { - compatible = "cache"; - }; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; - }; - - pmu: pmu { - compatible = "arm,cortex-a53-pmu"; - interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&B53_0>, <&B53_1>, - <&B53_2>, <&B53_3>; - }; - - clocks { - bootph-all; - periph_clk: periph-clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <200000000>; - }; - - hsspi_pll: hsspi-pll { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clocks = <&periph_clk>; - clock-mult = <2>; - clock-div = <1>; - }; - - uart_clk: uart-clk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clocks = <&periph_clk>; - clock-div = <4>; - clock-mult = <1>; - }; - - wdt_clk: wdt-clk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clocks = <&periph_clk>; - clock-div = <4>; - clock-mult = <1>; - }; - }; - - psci { - compatible = "arm,psci-0.2"; - method = "smc"; - }; - - axi@81000000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x0 0x81000000 0x8000>; - - gic: interrupt-controller@1000 { - compatible = "arm,gic-400"; - #interrupt-cells = <3>; - interrupt-controller; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; - reg = <0x1000 0x1000>, - <0x2000 0x2000>, - <0x4000 0x2000>, - <0x6000 0x2000>; - }; - }; - - bus@ff800000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x0 0xff800000 0x800000>; - bootph-all; - - uart0: serial@12000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x12000 0x1000>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&uart_clk>, <&uart_clk>; - clock-names = "uartclk", "apb_pclk"; - status = "disabled"; - }; - - leds: led-controller@800 { - compatible = "brcm,bcm6858-leds"; - reg = <0x800 0xe4>; - - status = "disabled"; - }; - - wdt1: watchdog@480 { - compatible = "brcm,bcm6345-wdt"; - reg = <0x480 0x14>; - clocks = <&wdt_clk>; - }; - - wdt2: watchdog@4c0 { - compatible = "brcm,bcm6345-wdt"; - reg = <0x4c0 0x14>; - clocks = <&wdt_clk>; - }; - - wdt-reboot { - compatible = "wdt-reboot"; - wdt = <&wdt1>; - }; - - gpio0: gpio-controller@500 { - compatible = "brcm,bcm6345-gpio"; - reg = <0x500 0x4>, - <0x520 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - gpio1: gpio-controller@504 { - compatible = "brcm,bcm6345-gpio"; - reg = <0x504 0x4>, - <0x524 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - gpio2: gpio-controller@508 { - compatible = "brcm,bcm6345-gpio"; - reg = <0x508 0x4>, - <0x528 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - gpio3: gpio-controller@50c { - compatible = "brcm,bcm6345-gpio"; - reg = <0x50c 0x4>, - <0x52c 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - gpio4: gpio-controller@510 { - compatible = "brcm,bcm6345-gpio"; - reg = <0x510 0x4>, - <0x530 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - gpio5: gpio-controller@514 { - compatible = "brcm,bcm6345-gpio"; - reg = <0x514 0x4>, - <0x534 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - gpio6: gpio-controller@518 { - compatible = "brcm,bcm6345-gpio"; - reg = <0x518 0x4>, - <0x538 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - gpio7: gpio-controller@51c { - compatible = "brcm,bcm6345-gpio"; - reg = <0x51c 0x4>, - <0x53c 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - hsspi: spi-controller@1000 { - compatible = "brcm,bcm6328-hsspi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x1000 0x600>; - clocks = <&hsspi_pll>, <&hsspi_pll>; - clock-names = "hsspi", "pll"; - spi-max-frequency = <100000000>; - num-cs = <8>; - - status = "disabled"; - }; - - nand: nand-controller@1800 { - compatible = "brcm,nand-bcm63158", - "brcm,brcmnand-v5.0", - "brcm,brcmnand"; - reg-names = "nand", "nand-int-base", "nand-cache"; - reg = <0x1800 0x180>, - <0x2000 0x10>, - <0x1c00 0x200>; - parameter-page-big-endian = <0>; - - status = "disabled"; - }; - }; -}; diff --git a/arch/arm/dts/bcm63178.dtsi b/arch/arm/dts/bcm63178.dtsi deleted file mode 100644 index cbd094dde6d..00000000000 --- a/arch/arm/dts/bcm63178.dtsi +++ /dev/null @@ -1,120 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright 2022 Broadcom Ltd. - */ - -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/interrupt-controller/irq.h> - -/ { - compatible = "brcm,bcm63178", "brcm,bcmbca"; - #address-cells = <1>; - #size-cells = <1>; - - interrupt-parent = <&gic>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - CA7_0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x0>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - }; - - CA7_1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x1>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - }; - - CA7_2: cpu@2 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x2>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - }; - - L2_0: l2-cache0 { - compatible = "cache"; - }; - }; - - timer { - compatible = "arm,armv7-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>; - arm,cpu-registers-not-fw-configured; - }; - - pmu: pmu { - compatible = "arm,cortex-a7-pmu"; - interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&CA7_0>, <&CA7_1>, - <&CA7_2>; - }; - - clocks: clocks { - periph_clk: periph-clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <200000000>; - }; - uart_clk: uart-clk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clocks = <&periph_clk>; - clock-div = <4>; - clock-mult = <1>; - }; - }; - - psci { - compatible = "arm,psci-0.2"; - method = "smc"; - }; - - axi@81000000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x81000000 0x8000>; - - gic: interrupt-controller@1000 { - compatible = "arm,cortex-a7-gic"; - #interrupt-cells = <3>; - interrupt-controller; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_HIGH)>; - reg = <0x1000 0x1000>, - <0x2000 0x2000>, - <0x4000 0x2000>, - <0x6000 0x2000>; - }; - }; - - bus@ff800000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0xff800000 0x800000>; - - uart0: serial@12000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x12000 0x1000>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&uart_clk>, <&uart_clk>; - clock-names = "uartclk", "apb_pclk"; - status = "disabled"; - }; - }; -}; diff --git a/arch/arm/dts/bcm6756.dtsi b/arch/arm/dts/bcm6756.dtsi deleted file mode 100644 index ce1b59faf80..00000000000 --- a/arch/arm/dts/bcm6756.dtsi +++ /dev/null @@ -1,130 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright 2022 Broadcom Ltd. - */ - -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/interrupt-controller/irq.h> - -/ { - compatible = "brcm,bcm6756", "brcm,bcmbca"; - #address-cells = <1>; - #size-cells = <1>; - - interrupt-parent = <&gic>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - CA7_0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x0>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - }; - - CA7_1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x1>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - }; - - CA7_2: cpu@2 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x2>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - }; - - CA7_3: cpu@3 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x3>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - }; - - L2_0: l2-cache0 { - compatible = "cache"; - }; - }; - - timer { - compatible = "arm,armv7-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; - arm,cpu-registers-not-fw-configured; - }; - - pmu: pmu { - compatible = "arm,cortex-a7-pmu"; - interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&CA7_0>, <&CA7_1>, - <&CA7_2>, <&CA7_3>; - }; - - clocks: clocks { - periph_clk: periph-clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <200000000>; - }; - - uart_clk: uart-clk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clocks = <&periph_clk>; - clock-div = <4>; - clock-mult = <1>; - }; - }; - - psci { - compatible = "arm,psci-0.2"; - method = "smc"; - }; - - axi@81000000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x81000000 0x8000>; - - gic: interrupt-controller@1000 { - compatible = "arm,cortex-a7-gic"; - #interrupt-cells = <3>; - interrupt-controller; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; - reg = <0x1000 0x1000>, - <0x2000 0x2000>, - <0x4000 0x2000>, - <0x6000 0x2000>; - }; - }; - - bus@ff800000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0xff800000 0x800000>; - - uart0: serial@12000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x12000 0x1000>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&uart_clk>, <&uart_clk>; - clock-names = "uartclk", "apb_pclk"; - status = "disabled"; - }; - }; -}; diff --git a/arch/arm/dts/bcm6813.dtsi b/arch/arm/dts/bcm6813.dtsi deleted file mode 100644 index c3e6197be80..00000000000 --- a/arch/arm/dts/bcm6813.dtsi +++ /dev/null @@ -1,128 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright 2022 Broadcom Ltd. - */ - -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> - -/ { - compatible = "brcm,bcm6813", "brcm,bcmbca"; - #address-cells = <2>; - #size-cells = <2>; - - interrupt-parent = <&gic>; - - cpus { - #address-cells = <2>; - #size-cells = <0>; - - B53_0: cpu@0 { - compatible = "brcm,brahma-b53"; - device_type = "cpu"; - reg = <0x0 0x0>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - }; - - B53_1: cpu@1 { - compatible = "brcm,brahma-b53"; - device_type = "cpu"; - reg = <0x0 0x1>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - }; - - B53_2: cpu@2 { - compatible = "brcm,brahma-b53"; - device_type = "cpu"; - reg = <0x0 0x2>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - }; - - B53_3: cpu@3 { - compatible = "brcm,brahma-b53"; - device_type = "cpu"; - reg = <0x0 0x3>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - }; - - L2_0: l2-cache0 { - compatible = "cache"; - }; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; - }; - - pmu: pmu { - compatible = "arm,cortex-a53-pmu"; - interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&B53_0>, <&B53_1>, - <&B53_2>, <&B53_3>; - }; - - clocks: clocks { - periph_clk: periph-clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <200000000>; - }; - uart_clk: uart-clk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clocks = <&periph_clk>; - clock-div = <4>; - clock-mult = <1>; - }; - }; - - psci { - compatible = "arm,psci-0.2"; - method = "smc"; - }; - - axi@81000000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x0 0x81000000 0x8000>; - - gic: interrupt-controller@1000 { - compatible = "arm,gic-400"; - #interrupt-cells = <3>; - interrupt-controller; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; - reg = <0x1000 0x1000>, - <0x2000 0x2000>, - <0x4000 0x2000>, - <0x6000 0x2000>; - }; - }; - - bus@ff800000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x0 0xff800000 0x800000>; - - uart0: serial@12000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x12000 0x1000>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&uart_clk>, <&uart_clk>; - clock-names = "uartclk", "apb_pclk"; - status = "disabled"; - }; - }; -}; diff --git a/arch/arm/dts/bcm6855.dtsi b/arch/arm/dts/bcm6855.dtsi deleted file mode 100644 index 10c003a57c9..00000000000 --- a/arch/arm/dts/bcm6855.dtsi +++ /dev/null @@ -1,257 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (C) 2022 Philippe Reynes <philippe.reynes@softathome.com> - * Copyright 2022 Broadcom Ltd. - */ - -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/interrupt-controller/irq.h> - -/ { - compatible = "brcm,bcm6855", "brcm,bcmbca"; - #address-cells = <1>; - #size-cells = <1>; - - interrupt-parent = <&gic>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - CA7_0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x0>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - }; - - CA7_1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x1>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - }; - - CA7_2: cpu@2 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x2>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - }; - - L2_0: l2-cache0 { - compatible = "cache"; - }; - }; - - timer { - compatible = "arm,armv7-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>; - arm,cpu-registers-not-fw-configured; - }; - - pmu: pmu { - compatible = "arm,cortex-a7-pmu"; - interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&CA7_0>, <&CA7_1>, <&CA7_2>; - }; - - clocks: clocks { - bootph-all; - - periph_clk: periph-clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <200000000>; - }; - - uart_clk: uart-clk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clocks = <&periph_clk>; - clock-div = <4>; - clock-mult = <1>; - }; - - hsspi_pll: hsspi-pll { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clocks = <&periph_clk>; - clock-mult = <2>; - clock-div = <1>; - }; - - wdt_clk: wdt-clk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clocks = <&periph_clk>; - clock-div = <4>; - clock-mult = <1>; - }; - }; - - psci { - compatible = "arm,psci-0.2"; - method = "smc"; - }; - - axi@81000000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x81000000 0x8000>; - - gic: interrupt-controller@1000 { - compatible = "arm,cortex-a7-gic"; - #interrupt-cells = <3>; - interrupt-controller; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_HIGH)>; - reg = <0x1000 0x1000>, - <0x2000 0x2000>, - <0x4000 0x2000>, - <0x6000 0x2000>; - }; - }; - - bus@ff800000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0xff800000 0x800000>; - bootph-all; - - uart0: serial@12000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x12000 0x1000>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&uart_clk>, <&uart_clk>; - clock-names = "uartclk", "apb_pclk"; - status = "disabled"; - }; - - wdt1: watchdog@480 { - compatible = "brcm,bcm6345-wdt"; - reg = <0x480 0x14>; - clocks = <&wdt_clk>; - }; - - wdt2: watchdog@4c0 { - compatible = "brcm,bcm6345-wdt"; - reg = <0x4c0 0x14>; - clocks = <&wdt_clk>; - }; - - wdt-reboot { - compatible = "wdt-reboot"; - wdt = <&wdt1>; - }; - - gpio0: gpio-controller@500 { - compatible = "brcm,bcm6345-gpio"; - reg = <0x500 0x4>, - <0x520 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - gpio1: gpio-controller@504 { - compatible = "brcm,bcm6345-gpio"; - reg = <0x504 0x4>, - <0x524 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - gpio2: gpio-controller@508 { - compatible = "brcm,bcm6345-gpio"; - reg = <0x508 0x4>, - <0x528 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - gpio3: gpio-controller@50c { - compatible = "brcm,bcm6345-gpio"; - reg = <0x50c 0x4>, - <0x52c 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - gpio4: gpio-controller@510 { - compatible = "brcm,bcm6345-gpio"; - reg = <0x510 0x4>, - <0x530 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - gpio5: gpio-controller@514 { - compatible = "brcm,bcm6345-gpio"; - reg = <0x514 0x4>, - <0x534 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - gpio6: gpio-controller@518 { - compatible = "brcm,bcm6345-gpio"; - reg = <0x518 0x4>, - <0x538 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - gpio7: gpio-controller@51c { - compatible = "brcm,bcm6345-gpio"; - reg = <0x51c 0x4>, - <0x53c 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - nand: nand-controller@1800 { - compatible = "brcm,nand-bcm6753", - "brcm,brcmnand-v5.0", - "brcm,brcmnand"; - reg-names = "nand", "nand-int-base", "nand-cache"; - reg = <0x1800 0x180>, - <0x2000 0x10>, - <0x1c00 0x200>; - parameter-page-big-endian = <0>; - - status = "disabled"; - }; - - leds: led-controller@3000 { - compatible = "brcm,bcm6753-leds"; - reg = <0x3000 0x3480>; - - status = "disabled"; - }; - }; -}; diff --git a/arch/arm/dts/bcm6856.dtsi b/arch/arm/dts/bcm6856.dtsi deleted file mode 100644 index 38c88f8399b..00000000000 --- a/arch/arm/dts/bcm6856.dtsi +++ /dev/null @@ -1,253 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (C) 2020 Philippe Reynes <philippe.reynes@softathome.com> - * Copyright 2022 Broadcom Ltd. - */ - -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> - -/ { - compatible = "brcm,bcm6856", "brcm,bcmbca"; - #address-cells = <2>; - #size-cells = <2>; - - interrupt-parent = <&gic>; - - cpus { - #address-cells = <2>; - #size-cells = <0>; - - B53_0: cpu@0 { - compatible = "brcm,brahma-b53"; - device_type = "cpu"; - reg = <0x0 0x0>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - }; - - B53_1: cpu@1 { - compatible = "brcm,brahma-b53"; - device_type = "cpu"; - reg = <0x0 0x1>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - }; - - L2_0: l2-cache0 { - compatible = "cache"; - }; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; - }; - - pmu: pmu { - compatible = "arm,cortex-a53-pmu"; - interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&B53_0>, <&B53_1>; - }; - - clocks: clocks { - bootph-all; - - periph_clk:periph-clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <200000000>; - }; - - hsspi_pll: hsspi-pll { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clocks = <&periph_clk>; - clock-mult = <2>; - clock-div = <1>; - }; - - wdt_clk: wdt-clk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clocks = <&periph_clk>; - clock-div = <4>; - clock-mult = <1>; - }; - }; - - psci { - compatible = "arm,psci-0.2"; - method = "smc"; - }; - - axi@81000000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x0 0x81000000 0x8000>; - - gic: interrupt-controller@1000 { - compatible = "arm,gic-400"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x1000 0x1000>, /* GICD */ - <0x2000 0x2000>, /* GICC */ - <0x4000 0x2000>, /* GICH */ - <0x6000 0x2000>; /* GICV */ - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | - IRQ_TYPE_LEVEL_HIGH)>; - }; - }; - - bus@ff800000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x0 0xff800000 0x800000>; - bootph-all; - - uart0: serial@640 { - compatible = "brcm,bcm6345-uart"; - reg = <0x640 0x18>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&periph_clk>; - clock-names = "refclk"; - status = "disabled"; - }; - - wdt1: watchdog@480 { - compatible = "brcm,bcm6345-wdt"; - reg = <0x480 0x14>; - clocks = <&wdt_clk>; - }; - - wdt2: watchdog@4c0 { - compatible = "brcm,bcm6345-wdt"; - reg = <0x4c0 0x14>; - clocks = <&wdt_clk>; - }; - - wdt-reboot { - compatible = "wdt-reboot"; - wdt = <&wdt1>; - }; - - leds: led-controller@800 { - compatible = "brcm,bcm6858-leds"; - reg = <0x800 0xe4>; - - status = "disabled"; - }; - - gpio0: gpio-controller@500 { - compatible = "brcm,bcm6345-gpio"; - reg = <0x500 0x4>, - <0x520 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - gpio1: gpio-controller@504 { - compatible = "brcm,bcm6345-gpio"; - reg = <0x504 0x4>, - <0x524 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - gpio2: gpio-controller@508 { - compatible = "brcm,bcm6345-gpio"; - reg = <0x508 0x4>, - <0x528 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - gpio3: gpio-controller@50c { - compatible = "brcm,bcm6345-gpio"; - reg = <0x50c 0x4>, - <0x52c 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - gpio4: gpio-controller@510 { - compatible = "brcm,bcm6345-gpio"; - reg = <0x510 0x4>, - <0x530 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - gpio5: gpio-controller@514 { - compatible = "brcm,bcm6345-gpio"; - reg = <0x514 0x4>, - <0x534 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - gpio6: gpio-controller@518 { - compatible = "brcm,bcm6345-gpio"; - reg = <0x518 0x4>, - <0x538 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - gpio7: gpio-controller@51c { - compatible = "brcm,bcm6345-gpio"; - reg = <0x51c 0x4>, - <0x53c 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - hsspi: spi-controller@1000 { - compatible = "brcm,bcm6328-hsspi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x1000 0x600>; - clocks = <&hsspi_pll>, <&hsspi_pll>; - clock-names = "hsspi", "pll"; - spi-max-frequency = <100000000>; - num-cs = <8>; - - status = "disabled"; - }; - - nand: nand-controller@1800 { - compatible = "brcm,nand-bcm68360", - "brcm,brcmnand-v5.0", - "brcm,brcmnand"; - reg-names = "nand", "nand-int-base", "nand-cache"; - reg = <0x1800 0x180>, - <0x2000 0x10>, - <0x1c00 0x200>; - parameter-page-big-endian = <0>; - - status = "disabled"; - }; - }; -}; diff --git a/arch/arm/dts/bcm6858.dtsi b/arch/arm/dts/bcm6858.dtsi deleted file mode 100644 index dc95047a265..00000000000 --- a/arch/arm/dts/bcm6858.dtsi +++ /dev/null @@ -1,272 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2018 Philippe Reynes <philippe.reynes@softathome.com> - * Copyright 2022 Broadcom Ltd. - */ - -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> - -/ { - compatible = "brcm,bcm6858", "brcm,bcmbca"; - #address-cells = <2>; - #size-cells = <2>; - - interrupt-parent = <&gic>; - - cpus { - #address-cells = <2>; - #size-cells = <0>; - - B53_0: cpu@0 { - compatible = "brcm,brahma-b53"; - device_type = "cpu"; - reg = <0x0 0x0>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - }; - - B53_1: cpu@1 { - compatible = "brcm,brahma-b53"; - device_type = "cpu"; - reg = <0x0 0x1>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - }; - - B53_2: cpu@2 { - compatible = "brcm,brahma-b53"; - device_type = "cpu"; - reg = <0x0 0x2>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - }; - - B53_3: cpu@3 { - compatible = "brcm,brahma-b53"; - device_type = "cpu"; - reg = <0x0 0x3>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - }; - - L2_0: l2-cache0 { - compatible = "cache"; - }; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; - }; - - pmu: pmu { - compatible = "arm,armv8-pmuv3"; - interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&B53_0>, <&B53_1>, - <&B53_2>, <&B53_3>; - }; - - clocks { - bootph-all; - - periph_clk: periph_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <200000000>; - }; - - hsspi_pll: hsspi-pll { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clocks = <&periph_clk>; - clock-mult = <2>; - clock-div = <1>; - }; - - wdt_clk: wdt-clk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clocks = <&periph_clk>; - clock-div = <4>; - clock-mult = <1>; - }; - }; - - psci { - compatible = "arm,psci-0.2"; - method = "smc"; - }; - - axi@81000000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x0 0x81000000 0x8000>; - - gic: interrupt-controller@1000 { - compatible = "arm,gic-400"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x1000 0x1000>, /* GICD */ - <0x2000 0x2000>, /* GICC */ - <0x4000 0x2000>, /* GICH */ - <0x6000 0x2000>; /* GICV */ - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | - IRQ_TYPE_LEVEL_HIGH)>; - }; - }; - - bus@ff800000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x0 0xff800000 0x800000>; - bootph-all; - - uart0: serial@640 { - compatible = "brcm,bcm6345-uart"; - reg = <0x640 0x18>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&periph_clk>; - clock-names = "refclk"; - status = "disabled"; - }; - - leds: led-controller@800 { - compatible = "brcm,bcm6858-leds"; - reg = <0x800 0xe4>; - - status = "disabled"; - }; - - wdt1: watchdog@2780 { - compatible = "brcm,bcm6345-wdt"; - reg = <0x2780 0x14>; - clocks = <&wdt_clk>; - }; - - wdt2: watchdog@27c0 { - compatible = "brcm,bcm6345-wdt"; - reg = <0x27c0 0x14>; - clocks = <&wdt_clk>; - }; - - wdt-reboot { - compatible = "wdt-reboot"; - wdt = <&wdt1>; - }; - - gpio0: gpio-controller@500 { - compatible = "brcm,bcm6345-gpio"; - reg = <0x500 0x4>, - <0x520 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - gpio1: gpio-controller@504 { - compatible = "brcm,bcm6345-gpio"; - reg = <0x504 0x4>, - <0x524 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - gpio2: gpio-controller@508 { - compatible = "brcm,bcm6345-gpio"; - reg = <0x508 0x4>, - <0x528 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - gpio3: gpio-controller@50c { - compatible = "brcm,bcm6345-gpio"; - reg = <0x50c 0x4>, - <0x52c 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - gpio4: gpio-controller@510 { - compatible = "brcm,bcm6345-gpio"; - reg = <0x510 0x4>, - <0x530 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - gpio5: gpio-controller@514 { - compatible = "brcm,bcm6345-gpio"; - reg = <0x514 0x4>, - <0x534 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - gpio6: gpio-controller@518 { - compatible = "brcm,bcm6345-gpio"; - reg = <0x518 0x4>, - <0x538 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - gpio7: gpio-controller@51c { - compatible = "brcm,bcm6345-gpio"; - reg = <0x51c 0x4>, - <0x53c 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - hsspi: spi-controller@1000 { - compatible = "brcm,bcm6328-hsspi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x1000 0x600>; - clocks = <&hsspi_pll>, <&hsspi_pll>; - clock-names = "hsspi", "pll"; - spi-max-frequency = <100000000>; - num-cs = <8>; - - status = "disabled"; - }; - - nand: nand-controller@1800 { - compatible = "brcm,nand-bcm6858", - "brcm,brcmnand-v5.0", - "brcm,brcmnand"; - reg-names = "nand", "nand-int-base", "nand-cache"; - reg = <0x1800 0x180>, - <0x2000 0x10>, - <0x1c00 0x200>; - parameter-page-big-endian = <0>; - - status = "disabled"; - }; - }; -}; diff --git a/arch/arm/dts/bcm6878.dtsi b/arch/arm/dts/bcm6878.dtsi deleted file mode 100644 index 1e8b5fa96c2..00000000000 --- a/arch/arm/dts/bcm6878.dtsi +++ /dev/null @@ -1,111 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright 2022 Broadcom Ltd. - */ - -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/interrupt-controller/irq.h> - -/ { - compatible = "brcm,bcm6878", "brcm,bcmbca"; - #address-cells = <1>; - #size-cells = <1>; - - interrupt-parent = <&gic>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - CA7_0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x0>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - }; - - CA7_1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x1>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - }; - - L2_0: l2-cache0 { - compatible = "cache"; - }; - }; - - timer { - compatible = "arm,armv7-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; - arm,cpu-registers-not-fw-configured; - }; - - pmu: pmu { - compatible = "arm,cortex-a7-pmu"; - interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&CA7_0>, <&CA7_1>; - }; - - clocks: clocks { - periph_clk: periph-clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <200000000>; - }; - uart_clk: uart-clk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clocks = <&periph_clk>; - clock-div = <4>; - clock-mult = <1>; - }; - }; - - psci { - compatible = "arm,psci-0.2"; - method = "smc"; - }; - - axi@81000000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x81000000 0x8000>; - - gic: interrupt-controller@1000 { - compatible = "arm,cortex-a7-gic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x1000 0x1000>, - <0x2000 0x2000>, - <0x4000 0x2000>, - <0x6000 0x2000>; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | - IRQ_TYPE_LEVEL_HIGH)>; - }; - }; - - bus@ff800000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0xff800000 0x800000>; - - uart0: serial@12000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x12000 0x1000>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&uart_clk>, <&uart_clk>; - clock-names = "uartclk", "apb_pclk"; - status = "disabled"; - }; - }; -}; diff --git a/arch/arm/dts/bcm947622.dts b/arch/arm/dts/bcm947622.dts deleted file mode 100644 index 6f083724ab8..00000000000 --- a/arch/arm/dts/bcm947622.dts +++ /dev/null @@ -1,30 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright 2019 Broadcom Ltd. - */ - -/dts-v1/; - -#include "bcm47622.dtsi" - -/ { - model = "Broadcom BCM947622 Reference Board"; - compatible = "brcm,bcm947622", "brcm,bcm47622", "brcm,bcmbca"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x08000000>; - }; -}; - -&uart0 { - status = "okay"; -}; diff --git a/arch/arm/dts/bcm94912.dts b/arch/arm/dts/bcm94912.dts deleted file mode 100644 index a3623e6f691..00000000000 --- a/arch/arm/dts/bcm94912.dts +++ /dev/null @@ -1,30 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright 2022 Broadcom Ltd. - */ - -/dts-v1/; - -#include "bcm4912.dtsi" - -/ { - model = "Broadcom BCM94912 Reference Board"; - compatible = "brcm,bcm94912", "brcm,bcm4912", "brcm,bcmbca"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x08000000>; - }; -}; - -&uart0 { - status = "okay"; -}; diff --git a/arch/arm/dts/bcm963146.dts b/arch/arm/dts/bcm963146.dts deleted file mode 100644 index e39f1e6d477..00000000000 --- a/arch/arm/dts/bcm963146.dts +++ /dev/null @@ -1,30 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright 2022 Broadcom Ltd. - */ - -/dts-v1/; - -#include "bcm63146.dtsi" - -/ { - model = "Broadcom BCM963146 Reference Board"; - compatible = "brcm,bcm963146", "brcm,bcm63146", "brcm,bcmbca"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x08000000>; - }; -}; - -&uart0 { - status = "okay"; -}; diff --git a/arch/arm/dts/bcm963158.dts b/arch/arm/dts/bcm963158.dts deleted file mode 100644 index eba07e0b1ca..00000000000 --- a/arch/arm/dts/bcm963158.dts +++ /dev/null @@ -1,30 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright 2022 Broadcom Ltd. - */ - -/dts-v1/; - -#include "bcm63158.dtsi" - -/ { - model = "Broadcom BCM963158 Reference Board"; - compatible = "brcm,bcm963158", "brcm,bcm63158", "brcm,bcmbca"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x08000000>; - }; -}; - -&uart0 { - status = "okay"; -}; diff --git a/arch/arm/dts/bcm963178.dts b/arch/arm/dts/bcm963178.dts deleted file mode 100644 index fa096e9cde2..00000000000 --- a/arch/arm/dts/bcm963178.dts +++ /dev/null @@ -1,30 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright 2019 Broadcom Ltd. - */ - -/dts-v1/; - -#include "bcm63178.dtsi" - -/ { - model = "Broadcom BCM963178 Reference Board"; - compatible = "brcm,bcm963178", "brcm,bcm63178", "brcm,bcmbca"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x08000000>; - }; -}; - -&uart0 { - status = "okay"; -}; diff --git a/arch/arm/dts/bcm96756.dts b/arch/arm/dts/bcm96756.dts deleted file mode 100644 index 9a4a87ba9c8..00000000000 --- a/arch/arm/dts/bcm96756.dts +++ /dev/null @@ -1,30 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright 2019 Broadcom Ltd. - */ - -/dts-v1/; - -#include "bcm6756.dtsi" - -/ { - model = "Broadcom BCM96756 Reference Board"; - compatible = "brcm,bcm96756", "brcm,bcm6756", "brcm,bcmbca"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x08000000>; - }; -}; - -&uart0 { - status = "okay"; -}; diff --git a/arch/arm/dts/bcm96813.dts b/arch/arm/dts/bcm96813.dts deleted file mode 100644 index af17091ae76..00000000000 --- a/arch/arm/dts/bcm96813.dts +++ /dev/null @@ -1,30 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright 2022 Broadcom Ltd. - */ - -/dts-v1/; - -#include "bcm6813.dtsi" - -/ { - model = "Broadcom BCM96813 Reference Board"; - compatible = "brcm,bcm96813", "brcm,bcm6813", "brcm,bcmbca"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x08000000>; - }; -}; - -&uart0 { - status = "okay"; -}; diff --git a/arch/arm/dts/bcm96855.dts b/arch/arm/dts/bcm96855.dts deleted file mode 100644 index e4e740c73e9..00000000000 --- a/arch/arm/dts/bcm96855.dts +++ /dev/null @@ -1,30 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright 2022 Broadcom Ltd. - */ - -/dts-v1/; - -#include "bcm6855.dtsi" - -/ { - model = "Broadcom BCM96855 Reference Board"; - compatible = "brcm,bcm96855", "brcm,bcm6855", "brcm,bcmbca"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x08000000>; - }; -}; - -&uart0 { - status = "okay"; -}; diff --git a/arch/arm/dts/bcm96856.dts b/arch/arm/dts/bcm96856.dts deleted file mode 100644 index 032aeb75c98..00000000000 --- a/arch/arm/dts/bcm96856.dts +++ /dev/null @@ -1,30 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright 2022 Broadcom Ltd. - */ - -/dts-v1/; - -#include "bcm6856.dtsi" - -/ { - model = "Broadcom BCM96856 Reference Board"; - compatible = "brcm,bcm96856", "brcm,bcm6856", "brcm,bcmbca"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x08000000>; - }; -}; - -&uart0 { - status = "okay"; -}; diff --git a/arch/arm/dts/bcm96858.dts b/arch/arm/dts/bcm96858.dts deleted file mode 100644 index 0cbf582f5d5..00000000000 --- a/arch/arm/dts/bcm96858.dts +++ /dev/null @@ -1,30 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright 2022 Broadcom Ltd. - */ - -/dts-v1/; - -#include "bcm6858.dtsi" - -/ { - model = "Broadcom BCM96858 Reference Board"; - compatible = "brcm,bcm96858", "brcm,bcm6858", "brcm,bcmbca"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x08000000>; - }; -}; - -&uart0 { - status = "okay"; -}; diff --git a/arch/arm/dts/bcm96878.dts b/arch/arm/dts/bcm96878.dts deleted file mode 100644 index 8fbc175cb45..00000000000 --- a/arch/arm/dts/bcm96878.dts +++ /dev/null @@ -1,30 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright 2019 Broadcom Ltd. - */ - -/dts-v1/; - -#include "bcm6878.dtsi" - -/ { - model = "Broadcom BCM96878 Reference Board"; - compatible = "brcm,bcm96878", "brcm,bcm6878", "brcm,bcmbca"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x08000000>; - }; -}; - -&uart0 { - status = "okay"; -}; diff --git a/arch/arm/dts/cn9130-atl-x250.dts b/arch/arm/dts/cn9130-atl-x250.dts new file mode 100644 index 00000000000..f2c82da9d14 --- /dev/null +++ b/arch/arm/dts/cn9130-atl-x250.dts @@ -0,0 +1,274 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2024 Allied Telesis Labs + */ + +#include "cn9130.dtsi" + +/ { + model = "Allied Telesis x250"; + compatible = "alliedtelesis,x250", + "marvell,cn9130", + "marvell,armada-ap806-quad", + "marvell,armada-ap806"; + + aliases { + serial0 = &uart0; + i2c0 = &cp0_i2c0; + i2c1 = &cp0_i2c1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-leds { + compatible = "gpio-leds"; + + fault { + label = "fault:red"; + gpios = <&cp0_gpio1 9 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + }; +}; + +/* + * AP related configuration + */ +&ap_pinctl { + /* AP_MPP Pins: + * GPIO & NC [0-6,9-10,12] + * UART0 [11,19] + * UART1 [7,8] + * Note: The x250-28XTm PT1 units has the console port wired + * to the second uart pins (UART1). This was fixed in all + * subsequent models. + * Here we choose to configure the pin control for both + * uarts to cater for either unit. + */ + /* 0 1 2 3 4 5 6 7 8 9 */ + pin-func = < 0 0 0 0 0 0 0 3 3 0 + 0 3 0 0 0 0 0 0 0 3 >; +}; + +&ap_gpio0 { + pp-reset { + gpio-hog; + gpios = <0 GPIO_ACTIVE_LOW>; + output-high; + line-name = "pp-reset"; + }; +}; + +/* + * CP related configuration + */ +&cp0_pinctl { + /* MPP Bus: + * [0-1] DEV + * [2-8] GPIO + * [9] DEV + * [10-12] GPIO + * [13] ND_RB + * [14] GPIO + * [15-28] DEV + * [29-30] GPIO + * [31] DEV + * [32-34] GPIO + * [35-36] I2C1 + * [37-38] I2C0 + * [39-55] GPIO + * [56-60] SPI + * [61-62] GPIO + */ + /* 0 1 2 3 4 5 6 7 8 9 */ + pin-func = < 1 1 0 0 0 0 0 0 0 1 + 0 0 0 2 0 1 1 1 1 1 + 1 1 1 1 1 1 1 1 1 0 + 0 1 0 0 0 2 2 2 2 0 + 0 0 0 0 0 0 0 0 0 0 + 0 0 0 0 0 0 6 6 6 6 + 6 0 0>; + + cp0_i2c0_pins: cp0-i2c-pins-0 { + marvell,pins = <37 38>; + marvell,function = <2>; + }; + + cp0_i2c0_gpio_pins: cp0-i2c-gpio-pins-0 { + marvell,pins = <37 38>; + marvell,function = <0>; + }; + + cp0_i2c1_pins: cp0-i2c-pins-1 { + marvell,pins = <35 36>; + marvell,function = <2>; + }; + + cp0_nand_pins: cp0-nand-pins { + marvell,pins = <0 1 9 15 16 17 18 19 20 21 22 23 24 25 26 27 28 31>; + marvell,function = <1>; + }; + + cp0_nand_rb: cp0-nand-rb { + marvell,pins = <13>; + marvell,function = <2>; + }; + + cp0_spi0_pins: cp0-spi-pins-0 { + marvell,pins = <56 57 58 59 60>; + marvell,function = <6>; + }; +}; + +&cp0_comphy { + phy0 { + phy-type = <COMPHY_TYPE_PEX0>; + }; + + phy1 { + phy-type = <COMPHY_TYPE_IGNORE>; + }; + + phy2 { + phy-type = <COMPHY_TYPE_IGNORE>; + }; + + phy3 { + phy-type = <COMPHY_TYPE_IGNORE>; + }; + + phy4 { + phy-type = <COMPHY_TYPE_IGNORE>; + }; + + phy5 { + phy-type = <COMPHY_TYPE_IGNORE>; + }; +}; + +&cp0_pcie0 { + num-lanes = <1>; + /* non-prefetchable memory */ + ranges =<0x82000000 0 0xc0000000 0 0xc0000000 0 0x2000000>; + status = "disabled"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + clock-frequency = <200000000>; +}; + +&cp0_utmi0 { + status = "okay"; +}; + +&cp0_usb3_0 { + status = "okay"; +}; + +&cp0_spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_spi0_pins>; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <50000000>; + m25p,fast-read; + }; +}; + +&cp0_nand { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_nand_pins &cp0_nand_rb>; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-timing-mode = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@user { + reg = <0x00000000 0x10000000>; + label = "user"; + }; + }; +}; + +&cp0_gpio0 +{ + nand-protect { + gpio-hog; + gpios = <29 GPIO_ACTIVE_LOW>; + output-low; + line-name = "nand-protect"; + }; +}; + +&cp0_gpio1 +{ + usb-en { + gpio-hog; + gpios = <0 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "usb-en"; + }; + + phy-reset { + gpio-hog; + gpios = <21 GPIO_ACTIVE_LOW>; + output-high; + line-name = "phy-reset"; + }; +}; + +&cp0_i2c0 { + status = "okay"; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&cp0_i2c0_pins>; + pinctrl-1 = <&cp0_i2c0_gpio_pins>; + scl-gpios = <&cp0_gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&cp0_gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + + mux@71 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nxp,pca9546"; + reg = <0x71>; + i2c-mux-idle-disconnect; + reset-gpios = <&cp0_gpio1 19 GPIO_ACTIVE_LOW>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + hwmon@2e { + compatible = "adi,adt7476"; + reg = <0x2e>; + }; + + rtc@68 { + compatible = "adi,max31331"; + reg = <0x68>; + }; + }; + }; +}; + +&cp0_i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c1_pins>; +}; diff --git a/arch/arm/dts/exynos850-e850-96-u-boot.dtsi b/arch/arm/dts/exynos850-e850-96-u-boot.dtsi index 3aa5d8bb10d..6d7148f7264 100644 --- a/arch/arm/dts/exynos850-e850-96-u-boot.dtsi +++ b/arch/arm/dts/exynos850-e850-96-u-boot.dtsi @@ -3,17 +3,6 @@ * Copyright (c) 2023 Linaro Ltd. */ -&soc { - /* TODO: Remove this node once it appears in upstream dts */ - trng: rng@12081400 { - compatible = "samsung,exynos850-trng"; - reg = <0x12081400 0x100>; - clocks = <&cmu_core CLK_GOUT_SSS_ACLK>, - <&cmu_core CLK_GOUT_SSS_PCLK>; - clock-names = "secss", "pclk"; - }; -}; - &pmu_system_controller { bootph-all; samsung,uart-debug-1; diff --git a/arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi b/arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi index aacf181e2dd..4202d1e5654 100644 --- a/arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi +++ b/arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi @@ -203,3 +203,7 @@ &sysclk { bootph-all; }; + +&usb0 { + dr_mode = "host"; +}; diff --git a/arch/arm/dts/imx8-capricorn-cxg3.dts b/arch/arm/dts/imx8-capricorn-cxg3.dts new file mode 100644 index 00000000000..2f8597579f3 --- /dev/null +++ b/arch/arm/dts/imx8-capricorn-cxg3.dts @@ -0,0 +1,129 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019 Siemens AG + */ + +#include "imx8-capricorn.dtsi" + +/ { + model = "Siemens CXG3"; + + leds_default: leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + run { + label = "run"; + gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + flt { + label = "flt"; + gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + svc { + label = "svc"; + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + com1_tx { + label = "com1-tx"; + gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + com1_rx { + label = "com1-rx"; + gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + com2_tx { + label = "com2-tx"; + gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + com2_rx { + label = "com2-rx"; + gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + cloud { + label = "cloud"; + gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + wlan { + label = "wlan"; + gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + apps { + label = "apps"; + gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + dbg2 { + label = "dbg2"; + gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + dbg3 { + label = "dbg3"; + gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + dbg4 { + label = "dbg4"; + gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>; + }; +}; + +&iomuxc { + pinctrl-0 = <&pinctrl_gpio_keys>; + + muxcgrp: imx8qxp-som { + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + SC_P_ESAI0_FST_LSIO_GPIO0_IO01 0x06000021 + SC_P_ESAI0_TX0_LSIO_GPIO0_IO04 0x06000021 + SC_P_SAI0_TXC_LSIO_GPIO0_IO26 0x06000021 + SC_P_SAI1_RXD_LSIO_GPIO0_IO29 0x06000021 + SC_P_FLEXCAN1_RX_LSIO_GPIO1_IO17 0x06000021 + SC_P_FLEXCAN1_TX_LSIO_GPIO1_IO18 0x06000021 + SC_P_QSPI0B_SCLK_LSIO_GPIO3_IO17 0x06000021 + SC_P_QSPI0B_DATA0_LSIO_GPIO3_IO18 0x06000021 + SC_P_QSPI0B_DATA1_LSIO_GPIO3_IO19 0x06000021 + SC_P_USB_SS3_TC0_LSIO_GPIO4_IO03 0x06000021 + SC_P_ENET0_RGMII_TXD1_LSIO_GPIO5_IO00 0x06000021 + SC_P_ENET0_RGMII_TXD2_LSIO_GPIO5_IO01 0x06000021 + SC_P_ENET0_REFCLK_125M_25M_LSIO_GPIO5_IO09 0x06000021 + >; + }; + }; + + pinctrl_gpio_keys: gpiokeysgrp { + fsl,pins = < + SC_P_MIPI_DSI1_GPIO0_00_LSIO_GPIO1_IO31 0x06000021 + >; + }; +}; diff --git a/arch/arm/dts/imx8qxp-capricorn-u-boot.dtsi b/arch/arm/dts/imx8-capricorn-u-boot.dtsi index cba56188f86..ad5309bd969 100644 --- a/arch/arm/dts/imx8qxp-capricorn-u-boot.dtsi +++ b/arch/arm/dts/imx8-capricorn-u-boot.dtsi @@ -6,130 +6,133 @@ #include "imx8qxp-u-boot.dtsi" &{/imx8qx-pm} { + bootph-all; +}; - bootph-pre-ram; +&A35_0 { + bootph-all; }; &mu { - bootph-pre-ram; + bootph-all; }; &clk { - bootph-pre-ram; + bootph-all; }; &iomuxc { - bootph-pre-ram; + bootph-all; }; &pd_lsio { - bootph-pre-ram; + bootph-all; }; &pd_lsio_gpio0 { - bootph-pre-ram; + bootph-all; }; &pd_lsio_gpio1 { - bootph-pre-ram; + bootph-all; }; &pd_lsio_gpio2 { - bootph-pre-ram; + bootph-all; }; &pd_lsio_gpio3 { - bootph-pre-ram; + bootph-all; }; &pd_lsio_gpio4 { - bootph-pre-ram; + bootph-all; }; &pd_lsio_gpio5 { - bootph-pre-ram; + bootph-all; }; &pd_lsio_gpio6 { - bootph-pre-ram; + bootph-all; }; &pd_lsio_gpio7 { - bootph-pre-ram; + bootph-all; }; &pd_dma { - bootph-pre-ram; + bootph-all; }; &pd_dma_lpuart0 { - bootph-pre-ram; + bootph-all; }; &pd_dma_lpuart2 { - bootph-pre-ram; + bootph-all; }; &pd_conn { - bootph-pre-ram; + bootph-all; }; &pd_conn_sdch0 { - bootph-pre-ram; + bootph-all; }; &pd_conn_sdch1 { - bootph-pre-ram; + bootph-all; }; &pd_conn_sdch2 { - bootph-pre-ram; + bootph-all; }; &gpio0 { - bootph-pre-ram; + bootph-all; }; &gpio1 { - bootph-pre-ram; + bootph-all; }; &gpio2 { - bootph-pre-ram; + bootph-all; }; &gpio3 { - bootph-pre-ram; + bootph-all; }; &gpio4 { - bootph-pre-ram; + bootph-all; }; &gpio5 { - bootph-pre-ram; + bootph-all; }; &gpio6 { - bootph-pre-ram; + bootph-all; }; &gpio7 { - bootph-pre-ram; + bootph-all; }; &lpuart0 { - bootph-pre-ram; + bootph-all; }; &lpuart2 { - bootph-pre-ram; + bootph-all; }; &usdhc1 { - bootph-pre-ram; + bootph-all; }; &usdhc2 { - bootph-pre-ram; + bootph-all; }; diff --git a/arch/arm/dts/imx8qxp-capricorn.dtsi b/arch/arm/dts/imx8-capricorn.dtsi index db5653ea1ff..3734a9d21f1 100644 --- a/arch/arm/dts/imx8qxp-capricorn.dtsi +++ b/arch/arm/dts/imx8-capricorn.dtsi @@ -9,124 +9,25 @@ /dts-v1/; #include "fsl-imx8qxp.dtsi" -#include "imx8qxp-capricorn-u-boot.dtsi" +#include "imx8-capricorn-u-boot.dtsi" / { - model = "Siemens Giedi"; - compatible = "siemens,capricorn", "fsl,imx8qxp"; - chosen { bootargs = "console=ttyLP2,115200 earlycon=lpuart32,0x5a080000,115200"; stdout-path = &lpuart2; }; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio_leds>; - - run { - label = "run"; - gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - - flt { - label = "flt"; - gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - - svc { - label = "svc"; - gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - - com1_tx { - label = "com1-tx"; - gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - - com1_rx { - label = "com1-rx"; - gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - - com2_tx { - label = "com2-tx"; - gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - - com2_rx { - label = "com2-rx"; - gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - - cloud { - label = "cloud"; - gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - - wlan { - label = "wlan"; - gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - - dbg1 { - label = "dbg1"; - gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - - dbg2 { - label = "dbg2"; - gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - - dbg3 { - label = "dbg3"; - gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - - dbg4 { - label = "dbg4"; - gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; + /* create device for u-boot wdt command */ + scu-wdt { + compatible = "siemens,scu-wdt"; }; + }; &iomuxc { pinctrl-names = "default"; muxcgrp: imx8qxp-som { - pinctrl_gpio_leds: gpioledsgrp { - fsl,pins = < - SC_P_ESAI0_FST_LSIO_GPIO0_IO01 0x06000021 - SC_P_ESAI0_TX0_LSIO_GPIO0_IO04 0x06000021 - SC_P_SAI0_TXC_LSIO_GPIO0_IO26 0x06000021 - SC_P_SAI1_RXD_LSIO_GPIO0_IO29 0x06000021 - SC_P_FLEXCAN1_RX_LSIO_GPIO1_IO17 0x06000021 - SC_P_FLEXCAN1_TX_LSIO_GPIO1_IO18 0x06000021 - SC_P_QSPI0B_SCLK_LSIO_GPIO3_IO17 0x06000021 - SC_P_QSPI0B_DATA0_LSIO_GPIO3_IO18 0x06000021 - SC_P_QSPI0B_DATA1_LSIO_GPIO3_IO19 0x06000021 - SC_P_USB_SS3_TC0_LSIO_GPIO4_IO03 0x06000021 - SC_P_ENET0_RGMII_TXD1_LSIO_GPIO5_IO00 0x06000021 - SC_P_ENET0_RGMII_TXD2_LSIO_GPIO5_IO01 0x06000021 - SC_P_ENET0_REFCLK_125M_25M_LSIO_GPIO5_IO09 0x06000021 - >; - }; - pinctrl_lpi2c0: lpi2c0grp { fsl,pins = < SC_P_MIPI_CSI0_GPIO0_00_ADMA_I2C0_SCL 0x0C000020 diff --git a/arch/arm/dts/imx8-deneb.dts b/arch/arm/dts/imx8-deneb.dts deleted file mode 100644 index 04c764aa941..00000000000 --- a/arch/arm/dts/imx8-deneb.dts +++ /dev/null @@ -1,10 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2019 Siemens AG - */ - -#include "imx8qxp-capricorn.dtsi" - -/ { - model = "Siemens Deneb"; -}; diff --git a/arch/arm/dts/imx8-giedi.dts b/arch/arm/dts/imx8-giedi.dts deleted file mode 100644 index 0dbfef2ee97..00000000000 --- a/arch/arm/dts/imx8-giedi.dts +++ /dev/null @@ -1,10 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2019 Siemens AG - */ - -#include "imx8qxp-capricorn.dtsi" - -/ { - model = "Siemens Giedi"; -}; diff --git a/arch/arm/dts/imx8mm-data-modul-edm-sbc-u-boot.dtsi b/arch/arm/dts/imx8mm-data-modul-edm-sbc-u-boot.dtsi index a235e088fa4..3a4f7d01b9e 100644 --- a/arch/arm/dts/imx8mm-data-modul-edm-sbc-u-boot.dtsi +++ b/arch/arm/dts/imx8mm-data-modul-edm-sbc-u-boot.dtsi @@ -16,6 +16,12 @@ dmo,ram-coding-gpios = <&gpio2 8 0>, <&gpio2 1 0>, <&gpio2 0 0>; }; + clk_pcie100: clk-pcie100 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + wdt-reboot { compatible = "wdt-reboot"; wdt = <&wdog1>; @@ -35,6 +41,15 @@ bootph-pre-ram; }; +&pcie_phy { + clocks = <&clk_pcie100>; +}; + +&pcie0 { + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>, + <&clk_pcie100>; +}; + &pinctrl_hog_sbc { bootph-pre-ram; }; @@ -77,6 +92,7 @@ &gpio2 { bootph-pre-ram; + bootph-some-ram; dsi-reset-hog { bootph-pre-ram; @@ -144,8 +160,17 @@ bootph-pre-ram; }; +&usbmisc1 { + bootph-pre-ram; +}; + +&usbphynop1 { + bootph-pre-ram; +}; + &usbotg1 { dr_mode = "peripheral"; + bootph-pre-ram; }; &usdhc2 { diff --git a/arch/arm/dts/imx8mm-phyboard-polis-rdk-u-boot.dtsi b/arch/arm/dts/imx8mm-phyboard-polis-rdk-u-boot.dtsi index 516e52e1f5d..512dbc9ee86 100644 --- a/arch/arm/dts/imx8mm-phyboard-polis-rdk-u-boot.dtsi +++ b/arch/arm/dts/imx8mm-phyboard-polis-rdk-u-boot.dtsi @@ -14,6 +14,10 @@ }; }; +&pinctrl_i2c1 { + bootph-pre-ram; +}; + &pinctrl_uart3 { bootph-pre-ram; }; @@ -54,6 +58,10 @@ bootph-pre-ram; }; +&i2c1 { + bootph-pre-ram; +}; + &uart3 { bootph-pre-ram; }; diff --git a/arch/arm/dts/imx8mm-venice-gw7905-0x-u-boot.dtsi b/arch/arm/dts/imx8mm-venice-gw75xx-0x-u-boot.dtsi index c259026d1a8..c259026d1a8 100644 --- a/arch/arm/dts/imx8mm-venice-gw7905-0x-u-boot.dtsi +++ b/arch/arm/dts/imx8mm-venice-gw75xx-0x-u-boot.dtsi diff --git a/arch/arm/dts/imx8mn-u-boot.dtsi b/arch/arm/dts/imx8mn-u-boot.dtsi index 6875c6d44ff..6d80d856365 100644 --- a/arch/arm/dts/imx8mn-u-boot.dtsi +++ b/arch/arm/dts/imx8mn-u-boot.dtsi @@ -68,6 +68,11 @@ bootph-all; }; +&osc_32k { + bootph-pre-ram; + bootph-all; +}; + #ifdef CONFIG_FSL_CAAM &sec_jr0 { bootph-pre-ram; diff --git a/arch/arm/dts/imx8mp-data-modul-edm-sbc-u-boot.dtsi b/arch/arm/dts/imx8mp-data-modul-edm-sbc-u-boot.dtsi index 805b5f57955..1e82e718b8f 100644 --- a/arch/arm/dts/imx8mp-data-modul-edm-sbc-u-boot.dtsi +++ b/arch/arm/dts/imx8mp-data-modul-edm-sbc-u-boot.dtsi @@ -64,6 +64,7 @@ &gpio3 { bootph-pre-ram; + bootph-some-ram; bl-enable-hog { bootph-pre-ram; @@ -92,6 +93,7 @@ &gpio4 { bootph-pre-ram; + bootph-some-ram; dsi-reset-hog { bootph-pre-ram; diff --git a/arch/arm/dts/imx8mp-dhcom-u-boot.dtsi b/arch/arm/dts/imx8mp-dhcom-u-boot.dtsi index c065fb82994..546490a4a81 100644 --- a/arch/arm/dts/imx8mp-dhcom-u-boot.dtsi +++ b/arch/arm/dts/imx8mp-dhcom-u-boot.dtsi @@ -9,6 +9,8 @@ aliases { eeprom0 = &eeprom0; eeprom1 = &eeprom1; + eeprom0wl = &eeprom0wl; + eeprom1wl = &eeprom1wl; mmc0 = &usdhc2; /* MicroSD */ mmc1 = &usdhc3; /* eMMC */ mmc2 = &usdhc1; /* SDIO */ diff --git a/arch/arm/dts/imx8mp-venice-gw71xx-2x-u-boot.dtsi b/arch/arm/dts/imx8mp-venice-gw71xx-2x-u-boot.dtsi index 216a7a0d8d7..a291b7abab6 100644 --- a/arch/arm/dts/imx8mp-venice-gw71xx-2x-u-boot.dtsi +++ b/arch/arm/dts/imx8mp-venice-gw71xx-2x-u-boot.dtsi @@ -4,15 +4,6 @@ */ #include "imx8mp-venice-gw702x-u-boot.dtsi" -&gpio1 { - tpm_rst { - gpio-hog; - output-high; - gpios = <11 GPIO_ACTIVE_HIGH>; - line-name = "tpm_rst#"; - }; -}; - &gpio4 { dio_1 { gpio-hog; @@ -21,6 +12,13 @@ line-name = "dio1"; }; + tpm_rst { + gpio-hog; + output-high; + gpios = <9 GPIO_ACTIVE_HIGH>; + line-name = "tpm_rst#"; + }; + dio_0 { gpio-hog; input; diff --git a/arch/arm/dts/imx8mp-venice-gw72xx-2x-u-boot.dtsi b/arch/arm/dts/imx8mp-venice-gw72xx-2x-u-boot.dtsi index 525316d1189..bdf5370fcdf 100644 --- a/arch/arm/dts/imx8mp-venice-gw72xx-2x-u-boot.dtsi +++ b/arch/arm/dts/imx8mp-venice-gw72xx-2x-u-boot.dtsi @@ -4,15 +4,6 @@ */ #include "imx8mp-venice-gw702x-u-boot.dtsi" -&gpio1 { - tpm_rst { - gpio-hog; - output-high; - gpios = <11 GPIO_ACTIVE_HIGH>; - line-name = "tpm_rst#"; - }; -}; - &gpio4 { dio_1 { gpio-hog; @@ -21,6 +12,13 @@ line-name = "dio1"; }; + tpm_rst { + gpio-hog; + output-high; + gpios = <9 GPIO_ACTIVE_HIGH>; + line-name = "tpm_rst#"; + }; + dio_0 { gpio-hog; input; diff --git a/arch/arm/dts/imx8mp-venice-gw73xx-2x-u-boot.dtsi b/arch/arm/dts/imx8mp-venice-gw73xx-2x-u-boot.dtsi index 4d0e9a1e67c..7e6f66bd9dd 100644 --- a/arch/arm/dts/imx8mp-venice-gw73xx-2x-u-boot.dtsi +++ b/arch/arm/dts/imx8mp-venice-gw73xx-2x-u-boot.dtsi @@ -10,15 +10,6 @@ reset-post-delay-us = <300000>; }; -&gpio1 { - tpm_rst { - gpio-hog; - output-high; - gpios = <11 GPIO_ACTIVE_HIGH>; - line-name = "tpm_rst#"; - }; -}; - &gpio4 { dio_1 { gpio-hog; @@ -27,6 +18,13 @@ line-name = "dio1"; }; + tpm_rst { + gpio-hog; + output-high; + gpios = <9 GPIO_ACTIVE_HIGH>; + line-name = "tpm_rst#"; + }; + dio_0 { gpio-hog; input; diff --git a/arch/arm/dts/imx8mp-venice-gw7905-2x-u-boot.dtsi b/arch/arm/dts/imx8mp-venice-gw75xx-2x-u-boot.dtsi index 981841cee0a..981841cee0a 100644 --- a/arch/arm/dts/imx8mp-venice-gw7905-2x-u-boot.dtsi +++ b/arch/arm/dts/imx8mp-venice-gw75xx-2x-u-boot.dtsi diff --git a/arch/arm/dts/imx8qxp-u-boot.dtsi b/arch/arm/dts/imx8qxp-u-boot.dtsi index 62791c34c77..8058caae9ba 100644 --- a/arch/arm/dts/imx8qxp-u-boot.dtsi +++ b/arch/arm/dts/imx8qxp-u-boot.dtsi @@ -120,6 +120,7 @@ }; }; +#ifdef CONFIG_XPL_BUILD imx-boot { filename = "flash.bin"; pad-byte = <0x00>; @@ -130,4 +131,5 @@ type = "blob-ext"; }; }; +#endif }; diff --git a/arch/arm/dts/imx91-11x11-evk-u-boot.dtsi b/arch/arm/dts/imx91-11x11-evk-u-boot.dtsi new file mode 100644 index 00000000000..54b4d0aa3b6 --- /dev/null +++ b/arch/arm/dts/imx91-11x11-evk-u-boot.dtsi @@ -0,0 +1,195 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2024 NXP + */ + +#include "imx91-u-boot.dtsi" + +/ { + wdt-reboot { + compatible = "wdt-reboot"; + wdt = <&wdog3>; + bootph-pre-ram; + bootph-some-ram; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; +}; + +&{/soc@0} { + bootph-all; + bootph-pre-ram; +}; + +&aips1 { + bootph-pre-ram; + bootph-all; +}; + +&aips2 { + bootph-pre-ram; + bootph-some-ram; +}; + +&aips3 { + bootph-pre-ram; + bootph-some-ram; +}; + +&iomuxc { + bootph-pre-ram; + bootph-some-ram; +}; + +®_usdhc2_vmmc { + u-boot,off-on-delay-us = <20000>; + bootph-pre-ram; + bootph-some-ram; +}; + +&pinctrl_reg_usdhc2_vmmc { + bootph-pre-ram; +}; + +&pinctrl_uart1 { + bootph-pre-ram; + bootph-some-ram; +}; + +&pinctrl_usdhc1 { + bootph-pre-ram; + bootph-some-ram; +}; + +&pinctrl_usdhc2_gpio { + bootph-pre-ram; + bootph-some-ram; +}; + +&pinctrl_usdhc2 { + bootph-pre-ram; + bootph-some-ram; +}; + +&gpio1 { + bootph-pre-ram; + bootph-some-ram; +}; + +&gpio2 { + bootph-pre-ram; + bootph-some-ram; +}; + +&gpio3 { + bootph-pre-ram; + bootph-some-ram; +}; + +&gpio4 { + bootph-pre-ram; + bootph-some-ram; +}; + +&lpuart1 { + bootph-pre-ram; + bootph-some-ram; +}; + +&usdhc1 { + bootph-pre-ram; + bootph-some-ram; +}; + +&usdhc2 { + bootph-pre-ram; + bootph-some-ram; + fsl,signal-voltage-switch-extra-delay-ms = <8>; +}; + +&lpi2c1 { + bootph-pre-ram; + bootph-some-ram; +}; + +&lpi2c2 { + bootph-pre-ram; + bootph-some-ram; +}; + +&lpi2c3 { + bootph-pre-ram; + bootph-some-ram; +}; + +&{/soc@0/bus@44000000/i2c@44350000/pmic@25} { + bootph-pre-ram; + bootph-some-ram; +}; + +&{/soc@0/bus@44000000/i2c@44350000/pmic@25/regulators} { + bootph-pre-ram; + bootph-some-ram; +}; + +&pinctrl_lpi2c1 { + bootph-pre-ram; + bootph-some-ram; +}; + +&pinctrl_lpi2c2 { + bootph-pre-ram; + bootph-some-ram; +}; + +&pinctrl_lpi2c3 { + bootph-pre-ram; + bootph-some-ram; +}; + +&fec { + compatible = "fsl,imx91-fec", "fsl,imx93-fec", "fsl,imx8mq-fec"; + phy-reset-gpios = <&pcal6524 16 GPIO_ACTIVE_LOW>; + phy-reset-duration = <15>; + phy-reset-post-delay = <100>; +}; + +ðphy1 { + reset-gpios = <&pcal6524 15 GPIO_ACTIVE_LOW>; + reset-assert-us = <15000>; + reset-deassert-us = <100000>; +}; + +&s4muap { + bootph-pre-ram; + bootph-some-ram; + status = "okay"; +}; + +&clk { + bootph-all; + bootph-pre-ram; + /delete-property/ assigned-clocks; + /delete-property/ assigned-clock-rates; + /delete-property/ assigned-clock-parents; +}; + +&osc_32k { + bootph-all; + bootph-pre-ram; +}; + +&osc_24m { + bootph-all; + bootph-pre-ram; +}; + +&clk_ext1 { + bootph-all; + bootph-pre-ram; +}; diff --git a/arch/arm/dts/imx91-u-boot.dtsi b/arch/arm/dts/imx91-u-boot.dtsi new file mode 100644 index 00000000000..5b639c965d6 --- /dev/null +++ b/arch/arm/dts/imx91-u-boot.dtsi @@ -0,0 +1,92 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2023 Mathieu Othacehe <m.othacehe@gmail.com> + */ + +/ { + binman: binman { + multiple-images; + }; +}; + +&A55_0 { + clocks = <&clk IMX93_CLK_A55_SEL>; +}; + +&binman { + u-boot-spl-ddr { + align = <4>; + align-size = <4>; + filename = "u-boot-spl-ddr.bin"; + pad-byte = <0xff>; + + u-boot-spl { + align-end = <4>; + filename = "u-boot-spl.bin"; + }; + + ddr-1d-imem-fw { + filename = "lpddr4_imem_1d_v202201.bin"; + align-end = <4>; + type = "blob-ext"; + }; + + ddr-1d-dmem-fw { + filename = "lpddr4_dmem_1d_v202201.bin"; + align-end = <4>; + type = "blob-ext"; + }; + + ddr-2d-imem-fw { + filename = "lpddr4_imem_2d_v202201.bin"; + align-end = <4>; + type = "blob-ext"; + }; + + ddr-2d-dmem-fw { + filename = "lpddr4_dmem_2d_v202201.bin"; + align-end = <4>; + type = "blob-ext"; + }; + }; + + spl { + filename = "spl.bin"; + + mkimage { + args = "-n spl/u-boot-spl.cfgout -T imx8image -e 0x204A0000"; + + blob { + filename = "u-boot-spl-ddr.bin"; + }; + }; + }; + + u-boot-container { + filename = "u-boot-container.bin"; + + mkimage { + args = "-n u-boot-container.cfgout -T imx8image -e 0x0"; + + blob { + filename = "u-boot.bin"; + }; + }; + }; + + imx-boot { + filename = "flash.bin"; + pad-byte = <0x00>; + + spl: blob-ext@1 { + filename = "spl.bin"; + offset = <0x0>; + align-size = <0x400>; + align = <0x400>; + }; + + uboot: blob-ext@2 { + filename = "u-boot-container.bin"; + }; + }; +}; diff --git a/arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi b/arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi index 6897c91f4d9..0c3ca2961c9 100644 --- a/arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi +++ b/arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi @@ -2,15 +2,22 @@ /* * Copyright (C) 2023 PHYTEC Messtechnik GmbH * Christoph Stoidner <c.stoidner@phytec.de> + * Copyright (C) 2024 PHYTEC Messtechnik GmbH * * Product homepage: - * phyBOARD-Segin carrier board is reused for the i.MX93 design. - * https://www.phytec.eu/en/produkte/single-board-computer/phyboard-segin-imx6ul/ + https://www.phytec.de/produkte/system-on-modules/phycore-imx-91-93/ */ #include "imx93-u-boot.dtsi" / { + /* + * The phyCORE-i.MX93 u-boot uses the imx93-phyboard-segin.dts as + * reference, but does only make use of its SoM (phyCORE) contained + * periphery. + */ + model = "PHYTEC phyCORE-i.MX93"; + wdt-reboot { compatible = "wdt-reboot"; wdt = <&wdog3>; @@ -139,6 +146,13 @@ &usdhc1 { bootph-pre-ram; bootph-some-ram; + /* + * Remove pinctrl assignments once they are added to imx93-phycore-som.dtsi + */ + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; }; &usdhc2 { @@ -215,6 +229,48 @@ MX93_PAD_ENET2_RD3__GPIO4_IO27 0x31e >; }; + + /* + * Remove pinctrl_usdhc1_100mhz and pinctrl_usdhc1_200mhz once they + * are added to imx93-phycore-som.dtsi + */ + /* need to config the SION for data and cmd pad, refer to ERR052021 */ + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + bootph-pre-ram; + bootph-some-ram; + fsl,pins = < + MX93_PAD_SD1_CLK__USDHC1_CLK 0x17be + MX93_PAD_SD1_CMD__USDHC1_CMD 0x4000139e + MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x4000138e + MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x4000139e + MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x400013be + MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x4000139e + MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x4000139e + MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x4000139e + MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x4000139e + MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x4000139e + MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x179e + >; + }; + + /* need to config the SION for data and cmd pad, refer to ERR052021 */ + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + bootph-pre-ram; + bootph-some-ram; + fsl,pins = < + MX93_PAD_SD1_CLK__USDHC1_CLK 0x17be + MX93_PAD_SD1_CMD__USDHC1_CMD 0x4000139e + MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x4000139e + MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x400013be + MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x400013be + MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x400013be + MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x400013be + MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x400013be + MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x400013be + MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x400013be + MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x179e + >; + }; }; &lpi2c3 { @@ -305,4 +361,13 @@ }; }; }; + + eeprom@50 { + bootph-pre-ram; + bootph-some-ram; + compatible = "atmel,24c32"; + reg = <0x50>; + pagesize = <32>; + vcc-supply = <&buck4>; + }; }; diff --git a/arch/arm/dts/k3-am62-lp-sk-u-boot.dtsi b/arch/arm/dts/k3-am62-lp-sk-u-boot.dtsi index cbcc7f3bb45..848bc350698 100644 --- a/arch/arm/dts/k3-am62-lp-sk-u-boot.dtsi +++ b/arch/arm/dts/k3-am62-lp-sk-u-boot.dtsi @@ -5,13 +5,3 @@ */ #include "k3-am62-lp-sk-binman.dtsi" - -/ { - chosen { - tick-timer = &main_timer0; - }; -}; - -&main_timer0 { - clock-frequency = <25000000>; -}; diff --git a/arch/arm/dts/k3-am62-r5-lp-sk.dts b/arch/arm/dts/k3-am62-r5-lp-sk.dts index b8e5f49a1fc..135e8d49b91 100644 --- a/arch/arm/dts/k3-am62-r5-lp-sk.dts +++ b/arch/arm/dts/k3-am62-r5-lp-sk.dts @@ -12,6 +12,7 @@ / { aliases { + tick-timer = &main_timer0; remoteproc0 = &sysctrler; remoteproc1 = &a53_0; serial0 = &wkup_uart0; @@ -72,6 +73,14 @@ }; }; +&main_timer0 { + /delete-property/ clocks; + /delete-property/ clocks-names; + /delete-property/ assigned-clocks; + /delete-property/ assigned-clock-parents; + clock-frequency = <25000000>; +}; + /* WKUP UART0 is used for DM firmware logs */ &wkup_uart0 { status = "okay"; diff --git a/arch/arm/dts/k3-am625-phycore-som-binman.dtsi b/arch/arm/dts/k3-am625-phycore-som-binman.dtsi index 63f2eed7ccb..31456d23167 100644 --- a/arch/arm/dts/k3-am625-phycore-som-binman.dtsi +++ b/arch/arm/dts/k3-am625-phycore-som-binman.dtsi @@ -137,6 +137,20 @@ }; }; }; + +#include "k3-binman-capsule-r5.dtsi" + +&capsule_tiboot3 { + efi-capsule { + /* + * The GUID is generated dynamically by taking a namespace UUID and hashing + * it with the board compatible and fw_image name: + * mkeficapsule guidgen k3-am625-r5-phycore-som-2gb.dtb PHYCORE_AM62X_TIBOOT3 + */ + image-guid = "C7D64D6D-10B2-54BC-A3BF-06A9DC3653D9"; + }; +}; + #endif /* CONFIG_TARGET_PHYCORE_AM62X_R5 */ #ifdef CONFIG_TARGET_PHYCORE_AM62X_A53 @@ -460,4 +474,29 @@ }; }; }; + +#include "k3-binman-capsule.dtsi" + +&capsule_tispl { + efi-capsule { + /* + * The GUID is generated dynamically by taking a namespace UUID and hashing + * it with the board compatible and fw_image name: + * mkeficapsule guidgen k3-am625-phyboard-lyra-rdk.dtb PHYCORE_AM62X_SPL + */ + image-guid = "09841C3F-F177-5D57-B1F6-754D92879205"; + }; +}; + +&capsule_uboot { + efi-capsule { + /* + * The GUID is generated dynamically by taking a namespace UUID and hashing + * it with the board compatible and fw_image name: + * mkeficapsule guidgen k3-am625-phyboard-lyra-rdk.dtb PHYCORE_AM62X_UBOOT + */ + image-guid = "D11A9016-515E-503A-8872-3FF65384D0C4"; + }; +}; + #endif /* CONFIG_TARGET_PHYCORE_AM62X_A53 */ diff --git a/arch/arm/dts/k3-am625-r5-sk.dts b/arch/arm/dts/k3-am625-r5-sk.dts index d2dd75469c1..34c501dd51b 100644 --- a/arch/arm/dts/k3-am625-r5-sk.dts +++ b/arch/arm/dts/k3-am625-r5-sk.dts @@ -12,6 +12,7 @@ / { aliases { + tick-timer = &main_timer0; remoteproc0 = &sysctrler; remoteproc1 = &a53_0; serial0 = &wkup_uart0; @@ -70,6 +71,14 @@ }; }; +&main_timer0 { + /delete-property/ clocks; + /delete-property/ clocks-names; + /delete-property/ assigned-clocks; + /delete-property/ assigned-clock-parents; + clock-frequency = <25000000>; +}; + /* WKUP UART0 is used for DM firmware logs */ &wkup_uart0 { status = "okay"; diff --git a/arch/arm/dts/k3-am625-sk-u-boot.dtsi b/arch/arm/dts/k3-am625-sk-u-boot.dtsi index 1fc0d407cbf..487ccf04b55 100644 --- a/arch/arm/dts/k3-am625-sk-u-boot.dtsi +++ b/arch/arm/dts/k3-am625-sk-u-boot.dtsi @@ -6,16 +6,6 @@ #include "k3-am625-sk-binman.dtsi" -/ { - chosen { - tick-timer = &main_timer0; - }; -}; - -&main_timer0 { - clock-frequency = <25000000>; -}; - &main_bcdma { reg = <0x00 0x485c0100 0x00 0x100>, <0x00 0x4c000000 0x00 0x20000>, diff --git a/arch/arm/dts/k3-am62a7-r5-sk.dts b/arch/arm/dts/k3-am62a7-r5-sk.dts index 464227b3b25..49e62533a95 100644 --- a/arch/arm/dts/k3-am62a7-r5-sk.dts +++ b/arch/arm/dts/k3-am62a7-r5-sk.dts @@ -12,6 +12,7 @@ / { aliases { + tick-timer = &main_timer0; remoteproc0 = &sysctrler; remoteproc1 = &a53_0; }; @@ -71,6 +72,15 @@ }; }; +&main_timer0 { + /delete-property/ clocks; + /delete-property/ clocks-names; + /delete-property/ assigned-clocks; + /delete-property/ assigned-clock-parents; + clock-frequency = <25000000>; + bootph-pre-ram; +}; + &wkup_uart0_pins_default { bootph-pre-ram; }; diff --git a/arch/arm/dts/k3-am62a7-sk-u-boot.dtsi b/arch/arm/dts/k3-am62a7-sk-u-boot.dtsi index c42dec16194..7dfbeb10c32 100644 --- a/arch/arm/dts/k3-am62a7-sk-u-boot.dtsi +++ b/arch/arm/dts/k3-am62a7-sk-u-boot.dtsi @@ -9,7 +9,6 @@ / { chosen { stdout-path = "serial2:115200n8"; - tick-timer = &main_timer0; }; memory@80000000 { @@ -17,10 +16,6 @@ }; }; -&main_timer0 { - bootph-all; -}; - &cbass_main { bootph-all; }; diff --git a/arch/arm/dts/k3-am62p-sk-binman.dtsi b/arch/arm/dts/k3-am62p-sk-binman.dtsi index 2177d5428d4..797644a7e0d 100644 --- a/arch/arm/dts/k3-am62p-sk-binman.dtsi +++ b/arch/arm/dts/k3-am62p-sk-binman.dtsi @@ -57,6 +57,55 @@ type = "blob-ext"; }; }; + + tiboot3-am62px-hs-evm.bin { + filename = "tiboot3-am62px-hs-evm.bin"; + + ti-secure-rom { + content = <&u_boot_spl_hs>, <&ti_fs_enc_hs>, <&combined_tifs_cfg_hs>, + <&combined_dm_cfg_hs>, <&sysfw_inner_cert_hs>; + combined; + dm-data; + sysfw-inner-cert; + keyfile = "custMpk.pem"; + sw-rev = <1>; + content-sbl = <&u_boot_spl_hs>; + content-sysfw = <&ti_fs_enc_hs>; + content-sysfw-data = <&combined_tifs_cfg_hs>; + content-sysfw-inner-cert = <&sysfw_inner_cert_hs>; + content-dm-data = <&combined_dm_cfg_hs>; + load = <0x43c00000>; + load-sysfw = <0x40000>; + load-sysfw-data = <0x67000>; + load-dm-data = <0x43c4a800>; + }; + + u_boot_spl_hs: u-boot-spl { + no-expanded; + }; + + ti_fs_enc_hs: ti-fs-enc.bin { + filename = "ti-sysfw/ti-fs-firmware-am62px-hs-enc.bin"; + type = "blob-ext"; + optional; + }; + + combined_tifs_cfg_hs: combined-tifs-cfg.bin { + filename = "combined-tifs-cfg.bin"; + type = "blob-ext"; + }; + + sysfw_inner_cert_hs: sysfw-inner-cert { + filename = "ti-sysfw/ti-fs-firmware-am62px-hs-cert.bin"; + type = "blob-ext"; + optional; + }; + + combined_dm_cfg_hs: combined-dm-cfg.bin { + filename = "combined-dm-cfg.bin"; + type = "blob-ext"; + }; + }; }; #include "k3-binman-capsule-r5.dtsi" diff --git a/arch/arm/dts/k3-am62p5-r5-sk.dts b/arch/arm/dts/k3-am62p5-r5-sk.dts index baf1a83dc12..b18b4ce1272 100644 --- a/arch/arm/dts/k3-am62p5-r5-sk.dts +++ b/arch/arm/dts/k3-am62p5-r5-sk.dts @@ -78,6 +78,14 @@ }; }; +&main_timer0 { + /delete-property/ clocks; + /delete-property/ clocks-names; + /delete-property/ assigned-clocks; + /delete-property/ assigned-clock-parents; + clock-frequency = <25000000>; +}; + /* WKUP UART0 is used for DM firmware logs */ &wkup_uart0 { status = "okay"; diff --git a/arch/arm/dts/k3-am642-phycore-som-binman.dtsi b/arch/arm/dts/k3-am642-phycore-som-binman.dtsi index 88d6c40e95c..3710564cd4a 100644 --- a/arch/arm/dts/k3-am642-phycore-som-binman.dtsi +++ b/arch/arm/dts/k3-am642-phycore-som-binman.dtsi @@ -118,6 +118,19 @@ }; }; +#include "k3-binman-capsule-r5.dtsi" + +&capsule_tiboot3 { + efi-capsule { + /* + * The GUID is generated dynamically by taking a namespace UUID and hashing + * it with the board compatible and fw_image name: + * mkeficapsule guidgen k3-am642-r5-phycore-som-2gb.dtb PHYCORE_AM64X_TIBOOT3 + */ + image-guid = "B0A6B4FA-5DF0-5CD1-90EC-B60BDE798486"; + }; +}; + #endif #ifdef CONFIG_TARGET_PHYCORE_AM64X_A53 @@ -502,4 +515,29 @@ }; }; }; + +#include "k3-binman-capsule.dtsi" + +&capsule_tispl { + efi-capsule { + /* + * The GUID is generated dynamically by taking a namespace UUID and hashing + * it with the board compatible and fw_image name: + * mkeficapsule guidgen k3-am642-phyboard-electra-rdk.dtb PHYCORE_AM64X_SPL + */ + image-guid = "D0F34382-C2C4-509C-A1D4-BC1CB1B992A8"; + }; +}; + +&capsule_uboot { + efi-capsule { + /* + * The GUID is generated dynamically by taking a namespace UUID and hashing + * it with the board compatible and fw_image name: + * mkeficapsule guidgen k3-am642-phyboard-electra-rdk.dtb PHYCORE_AM64X_UBOOT + */ + image-guid = "0BB40539-DB41-5407-B4D4-EAD057FE10F4"; + }; +}; + #endif /* CONFIG_TARGET_PHYCORE_AM64X_A53 */ diff --git a/arch/arm/dts/k3-am65-main.dtsi b/arch/arm/dts/k3-am65-main.dtsi deleted file mode 100644 index 5ebb87f467d..00000000000 --- a/arch/arm/dts/k3-am65-main.dtsi +++ /dev/null @@ -1,1568 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device Tree Source for AM6 SoC Family Main Domain peripherals - * - * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/ - */ -#include <dt-bindings/phy/phy-am654-serdes.h> - -&cbass_main { - msmc_ram: sram@70000000 { - compatible = "mmio-sram"; - reg = <0x0 0x70000000 0x0 0x200000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x0 0x70000000 0x200000>; - - atf-sram@0 { - reg = <0x0 0x20000>; - }; - - sysfw-sram@f0000 { - reg = <0xf0000 0x10000>; - }; - - l3cache-sram@100000 { - reg = <0x100000 0x100000>; - }; - }; - - gic500: interrupt-controller@1800000 { - compatible = "arm,gic-v3"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */ - <0x00 0x01880000 0x00 0x90000>, /* GICR */ - <0x00 0x6f000000 0x00 0x2000>, /* GICC */ - <0x00 0x6f010000 0x00 0x1000>, /* GICH */ - <0x00 0x6f020000 0x00 0x2000>; /* GICV */ - /* - * vcpumntirq: - * virtual CPU interface maintenance interrupt - */ - interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; - - gic_its: msi-controller@1820000 { - compatible = "arm,gic-v3-its"; - reg = <0x00 0x01820000 0x00 0x10000>; - socionext,synquacer-pre-its = <0x1000000 0x400000>; - msi-controller; - #msi-cells = <1>; - }; - }; - - serdes0: serdes@900000 { - compatible = "ti,phy-am654-serdes"; - reg = <0x0 0x900000 0x0 0x2000>; - reg-names = "serdes"; - #phy-cells = <2>; - power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 153 4>, <&k3_clks 153 1>, <&serdes1 AM654_SERDES_LO_REFCLK>; - clock-output-names = "serdes0_cmu_refclk", "serdes0_lo_refclk", "serdes0_ro_refclk"; - assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>; - assigned-clock-parents = <&k3_clks 153 8>, <&k3_clks 153 4>; - ti,serdes-clk = <&serdes0_clk>; - #clock-cells = <1>; - mux-controls = <&serdes_mux 0>; - }; - - serdes1: serdes@910000 { - compatible = "ti,phy-am654-serdes"; - reg = <0x0 0x910000 0x0 0x2000>; - reg-names = "serdes"; - #phy-cells = <2>; - power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>; - clocks = <&serdes0 AM654_SERDES_RO_REFCLK>, <&k3_clks 154 1>, <&k3_clks 154 5>; - clock-output-names = "serdes1_cmu_refclk", "serdes1_lo_refclk", "serdes1_ro_refclk"; - assigned-clocks = <&k3_clks 154 5>, <&serdes1 AM654_SERDES_CMU_REFCLK>; - assigned-clock-parents = <&k3_clks 154 9>, <&k3_clks 154 5>; - ti,serdes-clk = <&serdes1_clk>; - #clock-cells = <1>; - mux-controls = <&serdes_mux 1>; - }; - - main_uart0: serial@2800000 { - compatible = "ti,am654-uart"; - reg = <0x00 0x02800000 0x00 0x100>; - interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; - clock-frequency = <48000000>; - current-speed = <115200>; - power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>; - status = "disabled"; - }; - - main_uart1: serial@2810000 { - compatible = "ti,am654-uart"; - reg = <0x00 0x02810000 0x00 0x100>; - interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; - clock-frequency = <48000000>; - power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>; - status = "disabled"; - }; - - main_uart2: serial@2820000 { - compatible = "ti,am654-uart"; - reg = <0x00 0x02820000 0x00 0x100>; - interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; - clock-frequency = <48000000>; - power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>; - status = "disabled"; - }; - - crypto: crypto@4e00000 { - compatible = "ti,am654-sa2ul"; - reg = <0x0 0x4e00000 0x0 0x1200>; - power-domains = <&k3_pds 136 TI_SCI_PD_SHARED>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x04e00000 0x00 0x04e00000 0x0 0x30000>; - - dmas = <&main_udmap 0xc001>, <&main_udmap 0x4002>, - <&main_udmap 0x4003>; - dma-names = "tx", "rx1", "rx2"; - - rng: rng@4e10000 { - compatible = "inside-secure,safexcel-eip76"; - reg = <0x0 0x4e10000 0x0 0x7d>; - interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; /* Used by OP-TEE */ - }; - }; - - /* TIMERIO pad input CTRLMMR_TIMER*_CTRL registers */ - main_timerio_input: pinctrl@104200 { - compatible = "pinctrl-single"; - reg = <0x0 0x104200 0x0 0x30>; - #pinctrl-cells = <1>; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0x0000001ff>; - }; - - /* TIMERIO pad output CTCTRLMMR_TIMERIO*_CTRL registers */ - main_timerio_output: pinctrl@104280 { - compatible = "pinctrl-single"; - reg = <0x0 0x104280 0x0 0x20>; - #pinctrl-cells = <1>; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0x0000000f>; - }; - - main_pmx0: pinctrl@11c000 { - compatible = "pinctrl-single"; - reg = <0x0 0x11c000 0x0 0x2e4>; - #pinctrl-cells = <1>; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0xffffffff>; - }; - - main_pmx1: pinctrl@11c2e8 { - compatible = "pinctrl-single"; - reg = <0x0 0x11c2e8 0x0 0x24>; - #pinctrl-cells = <1>; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0xffffffff>; - }; - - main_i2c0: i2c@2000000 { - compatible = "ti,am654-i2c", "ti,omap4-i2c"; - reg = <0x0 0x2000000 0x0 0x100>; - interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - clock-names = "fck"; - clocks = <&k3_clks 110 1>; - power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>; - status = "disabled"; - }; - - main_i2c1: i2c@2010000 { - compatible = "ti,am654-i2c", "ti,omap4-i2c"; - reg = <0x0 0x2010000 0x0 0x100>; - interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - clock-names = "fck"; - clocks = <&k3_clks 111 1>; - power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>; - status = "disabled"; - }; - - main_i2c2: i2c@2020000 { - compatible = "ti,am654-i2c", "ti,omap4-i2c"; - reg = <0x0 0x2020000 0x0 0x100>; - interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - clock-names = "fck"; - clocks = <&k3_clks 112 1>; - power-domains = <&k3_pds 112 TI_SCI_PD_EXCLUSIVE>; - status = "disabled"; - }; - - main_i2c3: i2c@2030000 { - compatible = "ti,am654-i2c", "ti,omap4-i2c"; - reg = <0x0 0x2030000 0x0 0x100>; - interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - clock-names = "fck"; - clocks = <&k3_clks 113 1>; - power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>; - status = "disabled"; - }; - - ecap0: pwm@3100000 { - compatible = "ti,am654-ecap", "ti,am3352-ecap"; - #pwm-cells = <3>; - reg = <0x0 0x03100000 0x0 0x60>; - power-domains = <&k3_pds 39 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 39 0>; - clock-names = "fck"; - status = "disabled"; - }; - - main_spi0: spi@2100000 { - compatible = "ti,am654-mcspi","ti,omap4-mcspi"; - reg = <0x0 0x2100000 0x0 0x400>; - interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&k3_clks 137 1>; - power-domains = <&k3_pds 137 TI_SCI_PD_EXCLUSIVE>; - #address-cells = <1>; - #size-cells = <0>; - dmas = <&main_udmap 0xc500>, <&main_udmap 0x4500>; - dma-names = "tx0", "rx0"; - status = "disabled"; - }; - - main_spi1: spi@2110000 { - compatible = "ti,am654-mcspi","ti,omap4-mcspi"; - reg = <0x0 0x2110000 0x0 0x400>; - interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&k3_clks 138 1>; - power-domains = <&k3_pds 138 TI_SCI_PD_EXCLUSIVE>; - #address-cells = <1>; - #size-cells = <0>; - assigned-clocks = <&k3_clks 137 1>; - assigned-clock-rates = <48000000>; - status = "disabled"; - }; - - main_spi2: spi@2120000 { - compatible = "ti,am654-mcspi","ti,omap4-mcspi"; - reg = <0x0 0x2120000 0x0 0x400>; - interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&k3_clks 139 1>; - power-domains = <&k3_pds 139 TI_SCI_PD_EXCLUSIVE>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - main_spi3: spi@2130000 { - compatible = "ti,am654-mcspi","ti,omap4-mcspi"; - reg = <0x0 0x2130000 0x0 0x400>; - interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&k3_clks 140 1>; - power-domains = <&k3_pds 140 TI_SCI_PD_EXCLUSIVE>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - main_spi4: spi@2140000 { - compatible = "ti,am654-mcspi","ti,omap4-mcspi"; - reg = <0x0 0x2140000 0x0 0x400>; - interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&k3_clks 141 1>; - power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - main_timer0: timer@2400000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x2400000 0x00 0x400>; - interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&k3_clks 23 0>; - clock-names = "fck"; - assigned-clocks = <&k3_clks 23 0>; - assigned-clock-parents = <&k3_clks 23 1>; - power-domains = <&k3_pds 23 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - }; - - main_timer1: timer@2410000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x2410000 0x00 0x400>; - interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&k3_clks 24 0>; - clock-names = "fck"; - assigned-clocks = <&k3_clks 24 0>; - assigned-clock-parents = <&k3_clks 24 1>; - power-domains = <&k3_pds 24 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - }; - - main_timer2: timer@2420000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x2420000 0x00 0x400>; - interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&k3_clks 27 0>; - clock-names = "fck"; - assigned-clocks = <&k3_clks 27 0>; - assigned-clock-parents = <&k3_clks 27 1>; - power-domains = <&k3_pds 27 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - }; - - main_timer3: timer@2430000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x2430000 0x00 0x400>; - interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&k3_clks 28 0>; - clock-names = "fck"; - assigned-clocks = <&k3_clks 28 0>; - assigned-clock-parents = <&k3_clks 28 1>; - power-domains = <&k3_pds 28 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - }; - - main_timer4: timer@2440000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x2440000 0x00 0x400>; - interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&k3_clks 29 0>; - clock-names = "fck"; - assigned-clocks = <&k3_clks 29 0>; - assigned-clock-parents = <&k3_clks 29 1>; - power-domains = <&k3_pds 29 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - }; - - main_timer5: timer@2450000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x2450000 0x00 0x400>; - interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&k3_clks 30 0>; - clock-names = "fck"; - assigned-clocks = <&k3_clks 30 0>; - assigned-clock-parents = <&k3_clks 30 1>; - power-domains = <&k3_pds 30 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - }; - - main_timer6: timer@2460000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x2460000 0x00 0x400>; - interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&k3_clks 31 0>; - assigned-clocks = <&k3_clks 31 0>; - assigned-clock-parents = <&k3_clks 31 1>; - clock-names = "fck"; - power-domains = <&k3_pds 31 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - }; - - main_timer7: timer@2470000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x2470000 0x00 0x400>; - interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&k3_clks 32 0>; - clock-names = "fck"; - assigned-clocks = <&k3_clks 32 0>; - assigned-clock-parents = <&k3_clks 32 1>; - power-domains = <&k3_pds 32 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - }; - - main_timer8: timer@2480000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x2480000 0x00 0x400>; - interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&k3_clks 33 0>; - clock-names = "fck"; - assigned-clocks = <&k3_clks 33 0>; - assigned-clock-parents = <&k3_clks 33 1>; - power-domains = <&k3_pds 33 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - }; - - main_timer9: timer@2490000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x2490000 0x00 0x400>; - interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&k3_clks 34 0>; - clock-names = "fck"; - assigned-clocks = <&k3_clks 34 0>; - assigned-clock-parents = <&k3_clks 34 1>; - power-domains = <&k3_pds 34 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - }; - - main_timer10: timer@24a0000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x24a0000 0x00 0x400>; - interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&k3_clks 25 0>; - clock-names = "fck"; - assigned-clocks = <&k3_clks 25 0>; - assigned-clock-parents = <&k3_clks 25 1>; - power-domains = <&k3_pds 25 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - }; - - main_timer11: timer@24b0000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x24b0000 0x00 0x400>; - interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&k3_clks 26 0>; - clock-names = "fck"; - assigned-clocks = <&k3_clks 26 0>; - assigned-clock-parents = <&k3_clks 26 1>; - power-domains = <&k3_pds 26 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - }; - - sdhci0: mmc@4f80000 { - compatible = "ti,am654-sdhci-5.1"; - reg = <0x0 0x4f80000 0x0 0x260>, <0x0 0x4f90000 0x0 0x134>; - power-domains = <&k3_pds 47 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 47 0>, <&k3_clks 47 1>; - clock-names = "clk_ahb", "clk_xin"; - interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - ti,otap-del-sel-legacy = <0x0>; - ti,otap-del-sel-mmc-hs = <0x0>; - ti,otap-del-sel-sd-hs = <0x0>; - ti,otap-del-sel-sdr12 = <0x0>; - ti,otap-del-sel-sdr25 = <0x0>; - ti,otap-del-sel-sdr50 = <0x8>; - ti,otap-del-sel-sdr104 = <0x7>; - ti,otap-del-sel-ddr50 = <0x5>; - ti,otap-del-sel-ddr52 = <0x5>; - ti,otap-del-sel-hs200 = <0x5>; - ti,otap-del-sel-hs400 = <0x0>; - ti,trm-icp = <0x8>; - dma-coherent; - }; - - sdhci1: mmc@4fa0000 { - compatible = "ti,am654-sdhci-5.1"; - reg = <0x0 0x4fa0000 0x0 0x260>, <0x0 0x4fb0000 0x0 0x134>; - power-domains = <&k3_pds 48 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 48 0>, <&k3_clks 48 1>; - clock-names = "clk_ahb", "clk_xin"; - interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; - ti,otap-del-sel-legacy = <0x0>; - ti,otap-del-sel-mmc-hs = <0x0>; - ti,otap-del-sel-sd-hs = <0x0>; - ti,otap-del-sel-sdr12 = <0x0>; - ti,otap-del-sel-sdr25 = <0x0>; - ti,otap-del-sel-sdr50 = <0x8>; - ti,otap-del-sel-sdr104 = <0x7>; - ti,otap-del-sel-ddr50 = <0x4>; - ti,otap-del-sel-ddr52 = <0x4>; - ti,otap-del-sel-hs200 = <0x7>; - ti,clkbuf-sel = <0x7>; - ti,trm-icp = <0x8>; - dma-coherent; - }; - - scm_conf: scm-conf@100000 { - compatible = "syscon", "simple-mfd"; - reg = <0 0x00100000 0 0x1c000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x0 0x00100000 0x1c000>; - - serdes0_clk: clock@4080 { - compatible = "syscon"; - reg = <0x00004080 0x4>; - }; - - serdes1_clk: clock@4090 { - compatible = "syscon"; - reg = <0x00004090 0x4>; - }; - - serdes_mux: mux-controller { - compatible = "mmio-mux"; - #mux-control-cells = <1>; - mux-reg-masks = <0x4080 0x3>, /* SERDES0 lane select */ - <0x4090 0x3>; /* SERDES1 lane select */ - }; - - dss_oldi_io_ctrl: dss-oldi-io-ctrl@41e0 { - compatible = "syscon"; - reg = <0x000041e0 0x14>; - }; - - ehrpwm_tbclk: clock-controller@4140 { - compatible = "ti,am654-ehrpwm-tbclk"; - reg = <0x4140 0x18>; - #clock-cells = <1>; - }; - }; - - dwc3_0: dwc3@4000000 { - compatible = "ti,am654-dwc3"; - reg = <0x0 0x4000000 0x0 0x4000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x0 0x4000000 0x20000>; - interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; - dma-coherent; - power-domains = <&k3_pds 151 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 151 2>, <&k3_clks 151 7>; - assigned-clocks = <&k3_clks 151 2>, <&k3_clks 151 7>; - assigned-clock-parents = <&k3_clks 151 4>, /* set REF_CLK to 20MHz i.e. PER0_PLL/48 */ - <&k3_clks 151 9>; /* set PIPE3_TXB_CLK to CLK_12M_RC/256 (for HS only) */ - - usb0: usb@10000 { - compatible = "snps,dwc3"; - reg = <0x10000 0x10000>; - interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "peripheral", - "host", - "otg"; - maximum-speed = "high-speed"; - dr_mode = "otg"; - phys = <&usb0_phy>; - phy-names = "usb2-phy"; - snps,dis_u3_susphy_quirk; - }; - }; - - usb0_phy: phy@4100000 { - compatible = "ti,am654-usb2", "ti,omap-usb2"; - reg = <0x0 0x4100000 0x0 0x54>; - syscon-phy-power = <&scm_conf 0x4000>; - clocks = <&k3_clks 151 0>, <&k3_clks 151 1>; - clock-names = "wkupclk", "refclk"; - #phy-cells = <0>; - }; - - dwc3_1: dwc3@4020000 { - compatible = "ti,am654-dwc3"; - reg = <0x0 0x4020000 0x0 0x4000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x0 0x4020000 0x20000>; - interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; - dma-coherent; - power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 152 2>; - assigned-clocks = <&k3_clks 152 2>; - assigned-clock-parents = <&k3_clks 152 4>; /* set REF_CLK to 20MHz i.e. PER0_PLL/48 */ - - usb1: usb@10000 { - compatible = "snps,dwc3"; - reg = <0x10000 0x10000>; - interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "peripheral", - "host", - "otg"; - maximum-speed = "high-speed"; - dr_mode = "otg"; - phys = <&usb1_phy>; - phy-names = "usb2-phy"; - }; - }; - - usb1_phy: phy@4110000 { - compatible = "ti,am654-usb2", "ti,omap-usb2"; - reg = <0x0 0x4110000 0x0 0x54>; - syscon-phy-power = <&scm_conf 0x4020>; - clocks = <&k3_clks 152 0>, <&k3_clks 152 1>; - clock-names = "wkupclk", "refclk"; - #phy-cells = <0>; - }; - - intr_main_gpio: interrupt-controller@a00000 { - compatible = "ti,sci-intr"; - reg = <0x0 0x00a00000 0x0 0x400>; - ti,intr-trigger-type = <1>; - interrupt-controller; - interrupt-parent = <&gic500>; - #interrupt-cells = <1>; - ti,sci = <&dmsc>; - ti,sci-dev-id = <100>; - ti,interrupt-ranges = <0 392 32>; - }; - - main_navss: bus@30800000 { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x30800000 0x0 0x30800000 0x0 0xbc00000>; - dma-coherent; - dma-ranges; - - ti,sci-dev-id = <118>; - - intr_main_navss: interrupt-controller@310e0000 { - compatible = "ti,sci-intr"; - reg = <0x0 0x310e0000 0x0 0x2000>; - ti,intr-trigger-type = <4>; - interrupt-controller; - interrupt-parent = <&gic500>; - #interrupt-cells = <1>; - ti,sci = <&dmsc>; - ti,sci-dev-id = <182>; - ti,interrupt-ranges = <0 64 64>, - <64 448 64>; - }; - - inta_main_udmass: interrupt-controller@33d00000 { - compatible = "ti,sci-inta"; - reg = <0x0 0x33d00000 0x0 0x100000>; - interrupt-controller; - interrupt-parent = <&intr_main_navss>; - msi-controller; - #interrupt-cells = <0>; - ti,sci = <&dmsc>; - ti,sci-dev-id = <179>; - ti,interrupt-ranges = <0 0 256>; - }; - - secure_proxy_main: mailbox@32c00000 { - compatible = "ti,am654-secure-proxy"; - #mbox-cells = <1>; - reg-names = "target_data", "rt", "scfg"; - reg = <0x00 0x32c00000 0x00 0x100000>, - <0x00 0x32400000 0x00 0x100000>, - <0x00 0x32800000 0x00 0x100000>; - interrupt-names = "rx_011"; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; - }; - - hwspinlock: spinlock@30e00000 { - compatible = "ti,am654-hwspinlock"; - reg = <0x00 0x30e00000 0x00 0x1000>; - #hwlock-cells = <1>; - }; - - mailbox0_cluster0: mailbox@31f80000 { - compatible = "ti,am654-mailbox"; - reg = <0x00 0x31f80000 0x00 0x200>; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <16>; - interrupt-parent = <&intr_main_navss>; - status = "disabled"; - }; - - mailbox0_cluster1: mailbox@31f81000 { - compatible = "ti,am654-mailbox"; - reg = <0x00 0x31f81000 0x00 0x200>; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <16>; - interrupt-parent = <&intr_main_navss>; - status = "disabled"; - }; - - mailbox0_cluster2: mailbox@31f82000 { - compatible = "ti,am654-mailbox"; - reg = <0x00 0x31f82000 0x00 0x200>; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <16>; - interrupt-parent = <&intr_main_navss>; - status = "disabled"; - }; - - mailbox0_cluster3: mailbox@31f83000 { - compatible = "ti,am654-mailbox"; - reg = <0x00 0x31f83000 0x00 0x200>; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <16>; - interrupt-parent = <&intr_main_navss>; - status = "disabled"; - }; - - mailbox0_cluster4: mailbox@31f84000 { - compatible = "ti,am654-mailbox"; - reg = <0x00 0x31f84000 0x00 0x200>; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <16>; - interrupt-parent = <&intr_main_navss>; - status = "disabled"; - }; - - mailbox0_cluster5: mailbox@31f85000 { - compatible = "ti,am654-mailbox"; - reg = <0x00 0x31f85000 0x00 0x200>; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <16>; - interrupt-parent = <&intr_main_navss>; - status = "disabled"; - }; - - mailbox0_cluster6: mailbox@31f86000 { - compatible = "ti,am654-mailbox"; - reg = <0x00 0x31f86000 0x00 0x200>; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <16>; - interrupt-parent = <&intr_main_navss>; - status = "disabled"; - }; - - mailbox0_cluster7: mailbox@31f87000 { - compatible = "ti,am654-mailbox"; - reg = <0x00 0x31f87000 0x00 0x200>; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <16>; - interrupt-parent = <&intr_main_navss>; - status = "disabled"; - }; - - mailbox0_cluster8: mailbox@31f88000 { - compatible = "ti,am654-mailbox"; - reg = <0x00 0x31f88000 0x00 0x200>; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <16>; - interrupt-parent = <&intr_main_navss>; - status = "disabled"; - }; - - mailbox0_cluster9: mailbox@31f89000 { - compatible = "ti,am654-mailbox"; - reg = <0x00 0x31f89000 0x00 0x200>; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <16>; - interrupt-parent = <&intr_main_navss>; - status = "disabled"; - }; - - mailbox0_cluster10: mailbox@31f8a000 { - compatible = "ti,am654-mailbox"; - reg = <0x00 0x31f8a000 0x00 0x200>; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <16>; - interrupt-parent = <&intr_main_navss>; - status = "disabled"; - }; - - mailbox0_cluster11: mailbox@31f8b000 { - compatible = "ti,am654-mailbox"; - reg = <0x00 0x31f8b000 0x00 0x200>; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <16>; - interrupt-parent = <&intr_main_navss>; - status = "disabled"; - }; - - ringacc: ringacc@3c000000 { - compatible = "ti,am654-navss-ringacc"; - reg = <0x0 0x3c000000 0x0 0x400000>, - <0x0 0x38000000 0x0 0x400000>, - <0x0 0x31120000 0x0 0x100>, - <0x0 0x33000000 0x0 0x40000>, - <0x0 0x31080000 0x0 0x40000>; - reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg"; - ti,num-rings = <818>; - ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */ - ti,sci = <&dmsc>; - ti,sci-dev-id = <187>; - msi-parent = <&inta_main_udmass>; - }; - - main_udmap: dma-controller@31150000 { - compatible = "ti,am654-navss-main-udmap"; - reg = <0x0 0x31150000 0x0 0x100>, - <0x0 0x34000000 0x0 0x100000>, - <0x0 0x35000000 0x0 0x100000>; - reg-names = "gcfg", "rchanrt", "tchanrt"; - msi-parent = <&inta_main_udmass>; - #dma-cells = <1>; - - ti,sci = <&dmsc>; - ti,sci-dev-id = <188>; - ti,ringacc = <&ringacc>; - - ti,sci-rm-range-tchan = <0xf>, /* TX_HCHAN */ - <0xd>; /* TX_CHAN */ - ti,sci-rm-range-rchan = <0xb>, /* RX_HCHAN */ - <0xa>; /* RX_CHAN */ - ti,sci-rm-range-rflow = <0x0>; /* GP RFLOW */ - }; - - cpts@310d0000 { - compatible = "ti,am65-cpts"; - reg = <0x0 0x310d0000 0x0 0x400>; - reg-names = "cpts"; - clocks = <&main_cpts_mux>; - clock-names = "cpts"; - interrupts-extended = <&intr_main_navss 391>; - interrupt-names = "cpts"; - ti,cpts-periodic-outputs = <6>; - ti,cpts-ext-ts-inputs = <8>; - - main_cpts_mux: refclk-mux { - #clock-cells = <0>; - clocks = <&k3_clks 118 5>, <&k3_clks 118 11>, - <&k3_clks 118 6>, <&k3_clks 118 3>, - <&k3_clks 118 8>, <&k3_clks 118 14>, - <&k3_clks 120 3>, <&k3_clks 121 3>; - assigned-clocks = <&main_cpts_mux>; - assigned-clock-parents = <&k3_clks 118 5>; - }; - }; - }; - - main_gpio0: gpio@600000 { - compatible = "ti,am654-gpio", "ti,keystone-gpio"; - reg = <0x0 0x600000 0x0 0x100>; - gpio-controller; - #gpio-cells = <2>; - interrupt-parent = <&intr_main_gpio>; - interrupts = <192>, <193>, <194>, <195>, <196>, <197>; - interrupt-controller; - #interrupt-cells = <2>; - ti,ngpio = <96>; - ti,davinci-gpio-unbanked = <0>; - clocks = <&k3_clks 57 0>; - clock-names = "gpio"; - }; - - main_gpio1: gpio@601000 { - compatible = "ti,am654-gpio", "ti,keystone-gpio"; - reg = <0x0 0x601000 0x0 0x100>; - gpio-controller; - #gpio-cells = <2>; - interrupt-parent = <&intr_main_gpio>; - interrupts = <200>, <201>, <202>, <203>, <204>, <205>; - interrupt-controller; - #interrupt-cells = <2>; - ti,ngpio = <90>; - ti,davinci-gpio-unbanked = <0>; - clocks = <&k3_clks 58 0>; - clock-names = "gpio"; - }; - - pcie0_rc: pcie@5500000 { - compatible = "ti,am654-pcie-rc"; - reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x2000>, <0x0 0x5506000 0x0 0x1000>; - reg-names = "app", "dbics", "config", "atu"; - power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>; - #address-cells = <3>; - #size-cells = <2>; - ranges = <0x81000000 0 0 0x0 0x10020000 0 0x00010000>, - <0x82000000 0 0x10030000 0x0 0x10030000 0 0x07FD0000>; - ti,syscon-pcie-id = <&scm_conf 0x210>; - ti,syscon-pcie-mode = <&scm_conf 0x4060>; - bus-range = <0x0 0xff>; - num-viewport = <16>; - max-link-speed = <2>; - dma-coherent; - interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>; - msi-map = <0x0 &gic_its 0x0 0x10000>; - device_type = "pci"; - status = "disabled"; - }; - - pcie0_ep: pcie-ep@5500000 { - compatible = "ti,am654-pcie-ep"; - reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x8000000>, <0x0 0x5506000 0x0 0x1000>; - reg-names = "app", "dbics", "addr_space", "atu"; - power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>; - ti,syscon-pcie-mode = <&scm_conf 0x4060>; - num-ib-windows = <16>; - num-ob-windows = <16>; - max-link-speed = <2>; - dma-coherent; - interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - }; - - pcie1_rc: pcie@5600000 { - compatible = "ti,am654-pcie-rc"; - reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x2000>, <0x0 0x5606000 0x0 0x1000>; - reg-names = "app", "dbics", "config", "atu"; - power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>; - #address-cells = <3>; - #size-cells = <2>; - ranges = <0x81000000 0 0 0x0 0x18020000 0 0x00010000>, - <0x82000000 0 0x18030000 0x0 0x18030000 0 0x07FD0000>; - ti,syscon-pcie-id = <&scm_conf 0x210>; - ti,syscon-pcie-mode = <&scm_conf 0x4070>; - bus-range = <0x0 0xff>; - num-viewport = <16>; - max-link-speed = <2>; - dma-coherent; - interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>; - msi-map = <0x0 &gic_its 0x10000 0x10000>; - device_type = "pci"; - status = "disabled"; - }; - - pcie1_ep: pcie-ep@5600000 { - compatible = "ti,am654-pcie-ep"; - reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x4000000>, <0x0 0x5606000 0x0 0x1000>; - reg-names = "app", "dbics", "addr_space", "atu"; - power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>; - ti,syscon-pcie-mode = <&scm_conf 0x4070>; - num-ib-windows = <16>; - num-ob-windows = <16>; - max-link-speed = <2>; - dma-coherent; - interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - }; - - mcasp0: mcasp@2b00000 { - compatible = "ti,am33xx-mcasp-audio"; - reg = <0x0 0x02b00000 0x0 0x2000>, - <0x0 0x02b08000 0x0 0x1000>; - reg-names = "mpu","dat"; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tx", "rx"; - - dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>; - dma-names = "tx", "rx"; - - clocks = <&k3_clks 104 0>; - clock-names = "fck"; - power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>; - status = "disabled"; - }; - - mcasp1: mcasp@2b10000 { - compatible = "ti,am33xx-mcasp-audio"; - reg = <0x0 0x02b10000 0x0 0x2000>, - <0x0 0x02b18000 0x0 0x1000>; - reg-names = "mpu","dat"; - interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tx", "rx"; - - dmas = <&main_udmap 0xc401>, <&main_udmap 0x4401>; - dma-names = "tx", "rx"; - - clocks = <&k3_clks 105 0>; - clock-names = "fck"; - power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>; - status = "disabled"; - }; - - mcasp2: mcasp@2b20000 { - compatible = "ti,am33xx-mcasp-audio"; - reg = <0x0 0x02b20000 0x0 0x2000>, - <0x0 0x02b28000 0x0 0x1000>; - reg-names = "mpu","dat"; - interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "tx", "rx"; - - dmas = <&main_udmap 0xc402>, <&main_udmap 0x4402>; - dma-names = "tx", "rx"; - - clocks = <&k3_clks 106 0>; - clock-names = "fck"; - power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>; - status = "disabled"; - }; - - cal: cal@6f03000 { - compatible = "ti,am654-cal"; - reg = <0x0 0x06f03000 0x0 0x400>, - <0x0 0x06f03800 0x0 0x40>; - reg-names = "cal_top", - "cal_rx_core0"; - interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; - ti,camerrx-control = <&scm_conf 0x40c0>; - clock-names = "fck"; - clocks = <&k3_clks 2 0>; - power-domains = <&k3_pds 2 TI_SCI_PD_EXCLUSIVE>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - csi2_0: port@0 { - reg = <0>; - }; - }; - }; - - dss: dss@4a00000 { - compatible = "ti,am65x-dss"; - reg = <0x0 0x04a00000 0x0 0x1000>, /* common */ - <0x0 0x04a02000 0x0 0x1000>, /* vidl1 */ - <0x0 0x04a06000 0x0 0x1000>, /* vid */ - <0x0 0x04a07000 0x0 0x1000>, /* ovr1 */ - <0x0 0x04a08000 0x0 0x1000>, /* ovr2 */ - <0x0 0x04a0a000 0x0 0x1000>, /* vp1 */ - <0x0 0x04a0b000 0x0 0x1000>; /* vp2 */ - reg-names = "common", "vidl1", "vid", - "ovr1", "ovr2", "vp1", "vp2"; - - ti,am65x-oldi-io-ctrl = <&dss_oldi_io_ctrl>; - - power-domains = <&k3_pds 67 TI_SCI_PD_EXCLUSIVE>; - - clocks = <&k3_clks 67 1>, - <&k3_clks 216 1>, - <&k3_clks 67 2>; - clock-names = "fck", "vp1", "vp2"; - - /* - * Set vp2 clk (DPI_1_IN_CLK) mux to PLL4 via - * DIV1. See "Figure 12-3365. DSS Integration" - * in AM65x TRM for details. - */ - assigned-clocks = <&k3_clks 67 2>; - assigned-clock-parents = <&k3_clks 67 5>; - - interrupts = <GIC_SPI 166 IRQ_TYPE_EDGE_RISING>; - - dma-coherent; - - dss_ports: ports { - #address-cells = <1>; - #size-cells = <0>; - }; - }; - - ehrpwm0: pwm@3000000 { - compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm"; - #pwm-cells = <3>; - reg = <0x0 0x3000000 0x0 0x100>; - power-domains = <&k3_pds 40 TI_SCI_PD_EXCLUSIVE>; - clocks = <&ehrpwm_tbclk 0>, <&k3_clks 40 0>; - clock-names = "tbclk", "fck"; - status = "disabled"; - }; - - ehrpwm1: pwm@3010000 { - compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm"; - #pwm-cells = <3>; - reg = <0x0 0x3010000 0x0 0x100>; - power-domains = <&k3_pds 41 TI_SCI_PD_EXCLUSIVE>; - clocks = <&ehrpwm_tbclk 1>, <&k3_clks 41 0>; - clock-names = "tbclk", "fck"; - status = "disabled"; - }; - - ehrpwm2: pwm@3020000 { - compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm"; - #pwm-cells = <3>; - reg = <0x0 0x3020000 0x0 0x100>; - power-domains = <&k3_pds 42 TI_SCI_PD_EXCLUSIVE>; - clocks = <&ehrpwm_tbclk 2>, <&k3_clks 42 0>; - clock-names = "tbclk", "fck"; - status = "disabled"; - }; - - ehrpwm3: pwm@3030000 { - compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm"; - #pwm-cells = <3>; - reg = <0x0 0x3030000 0x0 0x100>; - power-domains = <&k3_pds 43 TI_SCI_PD_EXCLUSIVE>; - clocks = <&ehrpwm_tbclk 3>, <&k3_clks 43 0>; - clock-names = "tbclk", "fck"; - status = "disabled"; - }; - - ehrpwm4: pwm@3040000 { - compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm"; - #pwm-cells = <3>; - reg = <0x0 0x3040000 0x0 0x100>; - power-domains = <&k3_pds 44 TI_SCI_PD_EXCLUSIVE>; - clocks = <&ehrpwm_tbclk 4>, <&k3_clks 44 0>; - clock-names = "tbclk", "fck"; - status = "disabled"; - }; - - ehrpwm5: pwm@3050000 { - compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm"; - #pwm-cells = <3>; - reg = <0x0 0x3050000 0x0 0x100>; - power-domains = <&k3_pds 45 TI_SCI_PD_EXCLUSIVE>; - clocks = <&ehrpwm_tbclk 5>, <&k3_clks 45 0>; - clock-names = "tbclk", "fck"; - status = "disabled"; - }; - - icssg0: icssg@b000000 { - compatible = "ti,am654-icssg"; - reg = <0x00 0xb000000 0x00 0x80000>; - power-domains = <&k3_pds 62 TI_SCI_PD_EXCLUSIVE>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x00 0xb000000 0x80000>; - - icssg0_mem: memories@0 { - reg = <0x0 0x2000>, - <0x2000 0x2000>, - <0x10000 0x10000>; - reg-names = "dram0", "dram1", - "shrdram2"; - }; - - icssg0_cfg: cfg@26000 { - compatible = "ti,pruss-cfg", "syscon"; - reg = <0x26000 0x200>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x26000 0x2000>; - - clocks { - #address-cells = <1>; - #size-cells = <0>; - - icssg0_coreclk_mux: coreclk-mux@3c { - reg = <0x3c>; - #clock-cells = <0>; - clocks = <&k3_clks 62 19>, /* icssg0_core_clk */ - <&k3_clks 62 3>; /* icssg0_iclk */ - assigned-clocks = <&icssg0_coreclk_mux>; - assigned-clock-parents = <&k3_clks 62 3>; - }; - - icssg0_iepclk_mux: iepclk-mux@30 { - reg = <0x30>; - #clock-cells = <0>; - clocks = <&k3_clks 62 10>, /* icssg0_iep_clk */ - <&icssg0_coreclk_mux>; /* core_clk */ - assigned-clocks = <&icssg0_iepclk_mux>; - assigned-clock-parents = <&icssg0_coreclk_mux>; - }; - }; - }; - - icssg0_iep0: iep@2e000 { - compatible = "ti,am654-icss-iep"; - reg = <0x2e000 0x1000>; - clocks = <&icssg0_iepclk_mux>; - }; - - icssg0_iep1: iep@2f000 { - compatible = "ti,am654-icss-iep"; - reg = <0x2f000 0x1000>; - clocks = <&icssg0_iepclk_mux>; - }; - - icssg0_mii_rt: mii-rt@32000 { - compatible = "ti,pruss-mii", "syscon"; - reg = <0x32000 0x100>; - }; - - icssg0_mii_g_rt: mii-g-rt@33000 { - compatible = "ti,pruss-mii-g", "syscon"; - reg = <0x33000 0x1000>; - }; - - icssg0_intc: interrupt-controller@20000 { - compatible = "ti,icssg-intc"; - reg = <0x20000 0x2000>; - interrupt-controller; - #interrupt-cells = <3>; - interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "host_intr0", "host_intr1", - "host_intr2", "host_intr3", - "host_intr4", "host_intr5", - "host_intr6", "host_intr7"; - }; - - pru0_0: pru@34000 { - compatible = "ti,am654-pru"; - reg = <0x34000 0x4000>, - <0x22000 0x100>, - <0x22400 0x100>; - reg-names = "iram", "control", "debug"; - firmware-name = "am65x-pru0_0-fw"; - }; - - rtu0_0: rtu@4000 { - compatible = "ti,am654-rtu"; - reg = <0x4000 0x2000>, - <0x23000 0x100>, - <0x23400 0x100>; - reg-names = "iram", "control", "debug"; - firmware-name = "am65x-rtu0_0-fw"; - }; - - tx_pru0_0: txpru@a000 { - compatible = "ti,am654-tx-pru"; - reg = <0xa000 0x1800>, - <0x25000 0x100>, - <0x25400 0x100>; - reg-names = "iram", "control", "debug"; - firmware-name = "am65x-txpru0_0-fw"; - }; - - pru0_1: pru@38000 { - compatible = "ti,am654-pru"; - reg = <0x38000 0x4000>, - <0x24000 0x100>, - <0x24400 0x100>; - reg-names = "iram", "control", "debug"; - firmware-name = "am65x-pru0_1-fw"; - }; - - rtu0_1: rtu@6000 { - compatible = "ti,am654-rtu"; - reg = <0x6000 0x2000>, - <0x23800 0x100>, - <0x23c00 0x100>; - reg-names = "iram", "control", "debug"; - firmware-name = "am65x-rtu0_1-fw"; - }; - - tx_pru0_1: txpru@c000 { - compatible = "ti,am654-tx-pru"; - reg = <0xc000 0x1800>, - <0x25800 0x100>, - <0x25c00 0x100>; - reg-names = "iram", "control", "debug"; - firmware-name = "am65x-txpru0_1-fw"; - }; - - icssg0_mdio: mdio@32400 { - compatible = "ti,davinci_mdio"; - reg = <0x32400 0x100>; - clocks = <&k3_clks 62 3>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <0>; - bus_freq = <1000000>; - status = "disabled"; - }; - }; - - icssg1: icssg@b100000 { - compatible = "ti,am654-icssg"; - reg = <0x00 0xb100000 0x00 0x80000>; - power-domains = <&k3_pds 63 TI_SCI_PD_EXCLUSIVE>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x00 0xb100000 0x80000>; - - icssg1_mem: memories@0 { - reg = <0x0 0x2000>, - <0x2000 0x2000>, - <0x10000 0x10000>; - reg-names = "dram0", "dram1", - "shrdram2"; - }; - - icssg1_cfg: cfg@26000 { - compatible = "ti,pruss-cfg", "syscon"; - reg = <0x26000 0x200>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x26000 0x2000>; - - clocks { - #address-cells = <1>; - #size-cells = <0>; - - icssg1_coreclk_mux: coreclk-mux@3c { - reg = <0x3c>; - #clock-cells = <0>; - clocks = <&k3_clks 63 19>, /* icssg1_core_clk */ - <&k3_clks 63 3>; /* icssg1_iclk */ - assigned-clocks = <&icssg1_coreclk_mux>; - assigned-clock-parents = <&k3_clks 63 3>; - }; - - icssg1_iepclk_mux: iepclk-mux@30 { - reg = <0x30>; - #clock-cells = <0>; - clocks = <&k3_clks 63 10>, /* icssg1_iep_clk */ - <&icssg1_coreclk_mux>; /* core_clk */ - assigned-clocks = <&icssg1_iepclk_mux>; - assigned-clock-parents = <&icssg1_coreclk_mux>; - }; - }; - }; - - icssg1_iep0: iep@2e000 { - compatible = "ti,am654-icss-iep"; - reg = <0x2e000 0x1000>; - clocks = <&icssg1_iepclk_mux>; - }; - - icssg1_iep1: iep@2f000 { - compatible = "ti,am654-icss-iep"; - reg = <0x2f000 0x1000>; - clocks = <&icssg1_iepclk_mux>; - }; - - icssg1_mii_rt: mii-rt@32000 { - compatible = "ti,pruss-mii", "syscon"; - reg = <0x32000 0x100>; - }; - - icssg1_mii_g_rt: mii-g-rt@33000 { - compatible = "ti,pruss-mii-g", "syscon"; - reg = <0x33000 0x1000>; - }; - - icssg1_intc: interrupt-controller@20000 { - compatible = "ti,icssg-intc"; - reg = <0x20000 0x2000>; - interrupt-controller; - #interrupt-cells = <3>; - interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "host_intr0", "host_intr1", - "host_intr2", "host_intr3", - "host_intr4", "host_intr5", - "host_intr6", "host_intr7"; - }; - - pru1_0: pru@34000 { - compatible = "ti,am654-pru"; - reg = <0x34000 0x4000>, - <0x22000 0x100>, - <0x22400 0x100>; - reg-names = "iram", "control", "debug"; - firmware-name = "am65x-pru1_0-fw"; - }; - - rtu1_0: rtu@4000 { - compatible = "ti,am654-rtu"; - reg = <0x4000 0x2000>, - <0x23000 0x100>, - <0x23400 0x100>; - reg-names = "iram", "control", "debug"; - firmware-name = "am65x-rtu1_0-fw"; - }; - - tx_pru1_0: txpru@a000 { - compatible = "ti,am654-tx-pru"; - reg = <0xa000 0x1800>, - <0x25000 0x100>, - <0x25400 0x100>; - reg-names = "iram", "control", "debug"; - firmware-name = "am65x-txpru1_0-fw"; - }; - - pru1_1: pru@38000 { - compatible = "ti,am654-pru"; - reg = <0x38000 0x4000>, - <0x24000 0x100>, - <0x24400 0x100>; - reg-names = "iram", "control", "debug"; - firmware-name = "am65x-pru1_1-fw"; - }; - - rtu1_1: rtu@6000 { - compatible = "ti,am654-rtu"; - reg = <0x6000 0x2000>, - <0x23800 0x100>, - <0x23c00 0x100>; - reg-names = "iram", "control", "debug"; - firmware-name = "am65x-rtu1_1-fw"; - }; - - tx_pru1_1: txpru@c000 { - compatible = "ti,am654-tx-pru"; - reg = <0xc000 0x1800>, - <0x25800 0x100>, - <0x25c00 0x100>; - reg-names = "iram", "control", "debug"; - firmware-name = "am65x-txpru1_1-fw"; - }; - - icssg1_mdio: mdio@32400 { - compatible = "ti,davinci_mdio"; - reg = <0x32400 0x100>; - clocks = <&k3_clks 63 3>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <0>; - bus_freq = <1000000>; - status = "disabled"; - }; - }; - - icssg2: icssg@b200000 { - compatible = "ti,am654-icssg"; - reg = <0x00 0xb200000 0x00 0x80000>; - power-domains = <&k3_pds 64 TI_SCI_PD_EXCLUSIVE>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x00 0xb200000 0x80000>; - - icssg2_mem: memories@0 { - reg = <0x0 0x2000>, - <0x2000 0x2000>, - <0x10000 0x10000>; - reg-names = "dram0", "dram1", - "shrdram2"; - }; - - icssg2_cfg: cfg@26000 { - compatible = "ti,pruss-cfg", "syscon"; - reg = <0x26000 0x200>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x26000 0x2000>; - - clocks { - #address-cells = <1>; - #size-cells = <0>; - - icssg2_coreclk_mux: coreclk-mux@3c { - reg = <0x3c>; - #clock-cells = <0>; - clocks = <&k3_clks 64 19>, /* icssg1_core_clk */ - <&k3_clks 64 3>; /* icssg1_iclk */ - assigned-clocks = <&icssg2_coreclk_mux>; - assigned-clock-parents = <&k3_clks 64 3>; - }; - - icssg2_iepclk_mux: iepclk-mux@30 { - reg = <0x30>; - #clock-cells = <0>; - clocks = <&k3_clks 64 10>, /* icssg1_iep_clk */ - <&icssg2_coreclk_mux>; /* core_clk */ - assigned-clocks = <&icssg2_iepclk_mux>; - assigned-clock-parents = <&icssg2_coreclk_mux>; - }; - }; - }; - - icssg2_iep0: iep@2e000 { - compatible = "ti,am654-icss-iep"; - reg = <0x2e000 0x1000>; - clocks = <&icssg2_iepclk_mux>; - }; - - icssg2_iep1: iep@2f000 { - compatible = "ti,am654-icss-iep"; - reg = <0x2f000 0x1000>; - clocks = <&icssg2_iepclk_mux>; - }; - - icssg2_mii_rt: mii-rt@32000 { - compatible = "ti,pruss-mii", "syscon"; - reg = <0x32000 0x100>; - }; - - icssg2_mii_g_rt: mii-g-rt@33000 { - compatible = "ti,pruss-mii-g", "syscon"; - reg = <0x33000 0x1000>; - }; - - icssg2_intc: interrupt-controller@20000 { - compatible = "ti,icssg-intc"; - reg = <0x20000 0x2000>; - interrupt-controller; - #interrupt-cells = <3>; - interrupts = <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "host_intr0", "host_intr1", - "host_intr2", "host_intr3", - "host_intr4", "host_intr5", - "host_intr6", "host_intr7"; - }; - - pru2_0: pru@34000 { - compatible = "ti,am654-pru"; - reg = <0x34000 0x4000>, - <0x22000 0x100>, - <0x22400 0x100>; - reg-names = "iram", "control", "debug"; - firmware-name = "am65x-pru2_0-fw"; - }; - - rtu2_0: rtu@4000 { - compatible = "ti,am654-rtu"; - reg = <0x4000 0x2000>, - <0x23000 0x100>, - <0x23400 0x100>; - reg-names = "iram", "control", "debug"; - firmware-name = "am65x-rtu2_0-fw"; - }; - - tx_pru2_0: txpru@a000 { - compatible = "ti,am654-tx-pru"; - reg = <0xa000 0x1800>, - <0x25000 0x100>, - <0x25400 0x100>; - reg-names = "iram", "control", "debug"; - firmware-name = "am65x-txpru2_0-fw"; - }; - - pru2_1: pru@38000 { - compatible = "ti,am654-pru"; - reg = <0x38000 0x4000>, - <0x24000 0x100>, - <0x24400 0x100>; - reg-names = "iram", "control", "debug"; - firmware-name = "am65x-pru2_1-fw"; - }; - - rtu2_1: rtu@6000 { - compatible = "ti,am654-rtu"; - reg = <0x6000 0x2000>, - <0x23800 0x100>, - <0x23c00 0x100>; - reg-names = "iram", "control", "debug"; - firmware-name = "am65x-rtu2_1-fw"; - }; - - tx_pru2_1: txpru@c000 { - compatible = "ti,am654-tx-pru"; - reg = <0xc000 0x1800>, - <0x25800 0x100>, - <0x25c00 0x100>; - reg-names = "iram", "control", "debug"; - firmware-name = "am65x-txpru2_1-fw"; - }; - - icssg2_mdio: mdio@32400 { - compatible = "ti,davinci_mdio"; - reg = <0x32400 0x100>; - clocks = <&k3_clks 64 3>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <0>; - bus_freq = <1000000>; - status = "disabled"; - }; - }; -}; diff --git a/arch/arm/dts/k3-am65-mcu.dtsi b/arch/arm/dts/k3-am65-mcu.dtsi deleted file mode 100644 index edd5cfbec40..00000000000 --- a/arch/arm/dts/k3-am65-mcu.dtsi +++ /dev/null @@ -1,440 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device Tree Source for AM6 SoC Family MCU Domain peripherals - * - * Copyright (C) 2016-2020 Texas Instruments Incorporated - https://www.ti.com/ - */ - -&cbass_mcu { - mcu_conf: scm-conf@40f00000 { - compatible = "syscon", "simple-mfd"; - reg = <0x0 0x40f00000 0x0 0x20000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x0 0x40f00000 0x20000>; - - phy_gmii_sel: phy@4040 { - compatible = "ti,am654-phy-gmii-sel"; - reg = <0x4040 0x4>; - #phy-cells = <1>; - }; - }; - - /* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */ - mcu_timerio_input: pinctrl@40f04200 { - compatible = "pinctrl-single"; - reg = <0x0 0x40f04200 0x0 0x10>; - #pinctrl-cells = <1>; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0x00000101>; - }; - - /* MCU_TIMERIO pad output CTRLMMR_MCU_TIMERIO*_CTRL registers */ - mcu_timerio_output: pinctrl@40f04280 { - compatible = "pinctrl-single"; - reg = <0x0 0x40f04280 0x0 0x8>; - #pinctrl-cells = <1>; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0x00000003>; - }; - - mcu_uart0: serial@40a00000 { - compatible = "ti,am654-uart"; - reg = <0x00 0x40a00000 0x00 0x100>; - interrupts = <GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>; - clock-frequency = <96000000>; - current-speed = <115200>; - power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>; - status = "disabled"; - }; - - mcu_ram: sram@41c00000 { - compatible = "mmio-sram"; - reg = <0x00 0x41c00000 0x00 0x80000>; - ranges = <0x0 0x00 0x41c00000 0x80000>; - #address-cells = <1>; - #size-cells = <1>; - }; - - mcu_i2c0: i2c@40b00000 { - compatible = "ti,am654-i2c", "ti,omap4-i2c"; - reg = <0x0 0x40b00000 0x0 0x100>; - interrupts = <GIC_SPI 564 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - clock-names = "fck"; - clocks = <&k3_clks 114 1>; - power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>; - status = "disabled"; - }; - - mcu_spi0: spi@40300000 { - compatible = "ti,am654-mcspi","ti,omap4-mcspi"; - reg = <0x0 0x40300000 0x0 0x400>; - interrupts = <GIC_SPI 560 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&k3_clks 142 1>; - power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - mcu_spi1: spi@40310000 { - compatible = "ti,am654-mcspi","ti,omap4-mcspi"; - reg = <0x0 0x40310000 0x0 0x400>; - interrupts = <GIC_SPI 561 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&k3_clks 143 1>; - power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - mcu_spi2: spi@40320000 { - compatible = "ti,am654-mcspi","ti,omap4-mcspi"; - reg = <0x0 0x40320000 0x0 0x400>; - interrupts = <GIC_SPI 562 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&k3_clks 144 1>; - power-domains = <&k3_pds 144 TI_SCI_PD_EXCLUSIVE>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - tscadc0: tscadc@40200000 { - compatible = "ti,am654-tscadc", "ti,am3359-tscadc"; - reg = <0x0 0x40200000 0x0 0x1000>; - interrupts = <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&k3_clks 0 2>; - assigned-clocks = <&k3_clks 0 2>; - assigned-clock-rates = <60000000>; - clock-names = "fck"; - dmas = <&mcu_udmap 0x7100>, - <&mcu_udmap 0x7101 >; - dma-names = "fifo0", "fifo1"; - status = "disabled"; - - adc { - #io-channel-cells = <1>; - compatible = "ti,am654-adc", "ti,am3359-adc"; - }; - }; - - tscadc1: tscadc@40210000 { - compatible = "ti,am654-tscadc", "ti,am3359-tscadc"; - reg = <0x0 0x40210000 0x0 0x1000>; - interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&k3_clks 1 2>; - assigned-clocks = <&k3_clks 1 2>; - assigned-clock-rates = <60000000>; - clock-names = "fck"; - dmas = <&mcu_udmap 0x7102>, - <&mcu_udmap 0x7103>; - dma-names = "fifo0", "fifo1"; - status = "disabled"; - - adc { - #io-channel-cells = <1>; - compatible = "ti,am654-adc", "ti,am3359-adc"; - }; - }; - - /* - * The MCU domain timer interrupts are routed only to the ESM module, - * and not currently available for Linux. The MCU domain timers are - * of limited use without interrupts, and likely reserved by the ESM. - */ - mcu_timer0: timer@40400000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x40400000 0x00 0x400>; - clocks = <&k3_clks 35 0>; - clock-names = "fck"; - power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - status = "reserved"; - }; - - mcu_timer1: timer@40410000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x40410000 0x00 0x400>; - clocks = <&k3_clks 36 0>; - clock-names = "fck"; - power-domains = <&k3_pds 36 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - status = "reserved"; - }; - - mcu_timer2: timer@40420000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x40420000 0x00 0x400>; - clocks = <&k3_clks 37 0>; - clock-names = "fck"; - power-domains = <&k3_pds 37 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - status = "reserved"; - }; - - mcu_timer3: timer@40430000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x40430000 0x00 0x400>; - clocks = <&k3_clks 38 0>; - clock-names = "fck"; - power-domains = <&k3_pds 38 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - status = "reserved"; - }; - - mcu_navss: bus@28380000 { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>; - dma-coherent; - dma-ranges; - - ti,sci-dev-id = <119>; - - mcu_ringacc: ringacc@2b800000 { - compatible = "ti,am654-navss-ringacc"; - reg = <0x0 0x2b800000 0x0 0x400000>, - <0x0 0x2b000000 0x0 0x400000>, - <0x0 0x28590000 0x0 0x100>, - <0x0 0x2a500000 0x0 0x40000>, - <0x0 0x28440000 0x0 0x40000>; - reg-names = "rt", "fifos", "proxy_gcfg", - "proxy_target", "cfg"; - ti,num-rings = <286>; - ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */ - ti,sci = <&dmsc>; - ti,sci-dev-id = <195>; - msi-parent = <&inta_main_udmass>; - }; - - mcu_udmap: dma-controller@285c0000 { - compatible = "ti,am654-navss-mcu-udmap"; - reg = <0x0 0x285c0000 0x0 0x100>, - <0x0 0x2a800000 0x0 0x40000>, - <0x0 0x2aa00000 0x0 0x40000>; - reg-names = "gcfg", "rchanrt", "tchanrt"; - msi-parent = <&inta_main_udmass>; - #dma-cells = <1>; - - ti,sci = <&dmsc>; - ti,sci-dev-id = <194>; - ti,ringacc = <&mcu_ringacc>; - - ti,sci-rm-range-tchan = <0xf>, /* TX_HCHAN */ - <0xd>; /* TX_CHAN */ - ti,sci-rm-range-rchan = <0xb>, /* RX_HCHAN */ - <0xa>; /* RX_CHAN */ - ti,sci-rm-range-rflow = <0x0>; /* GP RFLOW */ - }; - }; - - secure_proxy_mcu: mailbox@2a480000 { - compatible = "ti,am654-secure-proxy"; - #mbox-cells = <1>; - reg-names = "target_data", "rt", "scfg"; - reg = <0x0 0x2a480000 0x0 0x80000>, - <0x0 0x2a380000 0x0 0x80000>, - <0x0 0x2a400000 0x0 0x80000>; - /* - * Marked Disabled: - * Node is incomplete as it is meant for bootloaders and - * firmware on non-MPU processors - */ - status = "disabled"; - }; - - m_can0: can@40528000 { - compatible = "bosch,m_can"; - reg = <0x0 0x40528000 0x0 0x400>, - <0x0 0x40500000 0x0 0x4400>; - reg-names = "m_can", "message_ram"; - power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 102 5>, <&k3_clks 102 0>; - clock-names = "hclk", "cclk"; - interrupt-parent = <&gic500>; - interrupts = <GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 545 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "int0", "int1"; - bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; - status = "disabled"; - }; - - m_can1: can@40568000 { - compatible = "bosch,m_can"; - reg = <0x0 0x40568000 0x0 0x400>, - <0x0 0x40540000 0x0 0x4400>; - reg-names = "m_can", "message_ram"; - power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 103 5>, <&k3_clks 103 0>; - clock-names = "hclk", "cclk"; - interrupt-parent = <&gic500>; - interrupts = <GIC_SPI 547 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 548 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "int0", "int1"; - bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; - status = "disabled"; - }; - - fss: bus@47000000 { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - ospi0: spi@47040000 { - compatible = "ti,am654-ospi", "cdns,qspi-nor"; - reg = <0x0 0x47040000 0x0 0x100>, - <0x5 0x00000000 0x1 0x0000000>; - interrupts = <GIC_SPI 552 IRQ_TYPE_LEVEL_HIGH>; - cdns,fifo-depth = <256>; - cdns,fifo-width = <4>; - cdns,trigger-address = <0x0>; - clocks = <&k3_clks 248 0>; - assigned-clocks = <&k3_clks 248 0>; - assigned-clock-parents = <&k3_clks 248 2>; - assigned-clock-rates = <166666666>; - power-domains = <&k3_pds 248 TI_SCI_PD_EXCLUSIVE>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - ospi1: spi@47050000 { - compatible = "ti,am654-ospi", "cdns,qspi-nor"; - reg = <0x0 0x47050000 0x0 0x100>, - <0x7 0x00000000 0x1 0x00000000>; - interrupts = <GIC_SPI 553 IRQ_TYPE_LEVEL_HIGH>; - cdns,fifo-depth = <256>; - cdns,fifo-width = <4>; - cdns,trigger-address = <0x0>; - clocks = <&k3_clks 249 6>; - power-domains = <&k3_pds 249 TI_SCI_PD_EXCLUSIVE>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - }; - - mcu_cpsw: ethernet@46000000 { - compatible = "ti,am654-cpsw-nuss"; - #address-cells = <2>; - #size-cells = <2>; - reg = <0x0 0x46000000 0x0 0x200000>; - reg-names = "cpsw_nuss"; - ranges = <0x0 0x0 0x0 0x46000000 0x0 0x200000>; - dma-coherent; - clocks = <&k3_clks 5 10>; - clock-names = "fck"; - power-domains = <&k3_pds 5 TI_SCI_PD_EXCLUSIVE>; - - dmas = <&mcu_udmap 0xf000>, - <&mcu_udmap 0xf001>, - <&mcu_udmap 0xf002>, - <&mcu_udmap 0xf003>, - <&mcu_udmap 0xf004>, - <&mcu_udmap 0xf005>, - <&mcu_udmap 0xf006>, - <&mcu_udmap 0xf007>, - <&mcu_udmap 0x7000>; - dma-names = "tx0", "tx1", "tx2", "tx3", - "tx4", "tx5", "tx6", "tx7", - "rx"; - - ethernet-ports { - #address-cells = <1>; - #size-cells = <0>; - - cpsw_port1: port@1 { - reg = <1>; - ti,mac-only; - label = "port1"; - ti,syscon-efuse = <&mcu_conf 0x200>; - phys = <&phy_gmii_sel 1>; - }; - }; - - davinci_mdio: mdio@f00 { - compatible = "ti,cpsw-mdio","ti,davinci_mdio"; - reg = <0x0 0xf00 0x0 0x100>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&k3_clks 5 10>; - clock-names = "fck"; - bus_freq = <1000000>; - status = "disabled"; - }; - - cpts@3d000 { - compatible = "ti,am65-cpts"; - reg = <0x0 0x3d000 0x0 0x400>; - clocks = <&mcu_cpsw_cpts_mux>; - clock-names = "cpts"; - interrupts-extended = <&gic500 GIC_SPI 570 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cpts"; - ti,cpts-ext-ts-inputs = <4>; - ti,cpts-periodic-outputs = <2>; - - mcu_cpsw_cpts_mux: refclk-mux { - #clock-cells = <0>; - clocks = <&k3_clks 118 5>, <&k3_clks 118 11>, - <&k3_clks 118 6>, <&k3_clks 118 3>, - <&k3_clks 118 8>, <&k3_clks 118 14>, - <&k3_clks 120 3>, <&k3_clks 121 3>; - assigned-clocks = <&mcu_cpsw_cpts_mux>; - assigned-clock-parents = <&k3_clks 118 5>; - }; - }; - }; - - mcu_r5fss0: r5fss@41000000 { - compatible = "ti,am654-r5fss"; - ti,cluster-mode = <1>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x41000000 0x00 0x41000000 0x20000>, - <0x41400000 0x00 0x41400000 0x20000>; - power-domains = <&k3_pds 129 TI_SCI_PD_EXCLUSIVE>; - - mcu_r5fss0_core0: r5f@41000000 { - compatible = "ti,am654-r5f"; - reg = <0x41000000 0x00008000>, - <0x41010000 0x00008000>; - reg-names = "atcm", "btcm"; - ti,sci = <&dmsc>; - ti,sci-dev-id = <159>; - ti,sci-proc-ids = <0x01 0xff>; - resets = <&k3_reset 159 1>; - firmware-name = "am65x-mcu-r5f0_0-fw"; - ti,atcm-enable = <1>; - ti,btcm-enable = <1>; - ti,loczrama = <1>; - }; - - mcu_r5fss0_core1: r5f@41400000 { - compatible = "ti,am654-r5f"; - reg = <0x41400000 0x00008000>, - <0x41410000 0x00008000>; - reg-names = "atcm", "btcm"; - ti,sci = <&dmsc>; - ti,sci-dev-id = <245>; - ti,sci-proc-ids = <0x02 0xff>; - resets = <&k3_reset 245 1>; - firmware-name = "am65x-mcu-r5f0_1-fw"; - ti,atcm-enable = <1>; - ti,btcm-enable = <1>; - ti,loczrama = <1>; - }; - }; - - mcu_rti1: watchdog@40610000 { - compatible = "ti,j7-rti-wdt"; - reg = <0x0 0x40610000 0x0 0x100>; - clocks = <&k3_clks 135 0>; - power-domains = <&k3_pds 135 TI_SCI_PD_SHARED>; - assigned-clocks = <&k3_clks 135 0>; - assigned-clock-parents = <&k3_clks 135 4>; - }; -}; diff --git a/arch/arm/dts/k3-am65-wakeup.dtsi b/arch/arm/dts/k3-am65-wakeup.dtsi deleted file mode 100644 index fd2b998ebdd..00000000000 --- a/arch/arm/dts/k3-am65-wakeup.dtsi +++ /dev/null @@ -1,105 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device Tree Source for AM6 SoC Family Wakeup Domain peripherals - * - * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/ - */ - -&cbass_wakeup { - dmsc: system-controller@44083000 { - compatible = "ti,am654-sci"; - ti,host-id = <12>; - - mbox-names = "rx", "tx"; - - mboxes = <&secure_proxy_main 11>, - <&secure_proxy_main 13>; - - reg-names = "debug_messages"; - reg = <0x44083000 0x1000>; - - k3_pds: power-controller { - compatible = "ti,sci-pm-domain"; - #power-domain-cells = <2>; - }; - - k3_clks: clock-controller { - compatible = "ti,k2g-sci-clk"; - #clock-cells = <2>; - }; - - k3_reset: reset-controller { - compatible = "ti,sci-reset"; - #reset-cells = <2>; - }; - }; - - chipid@43000014 { - compatible = "ti,am654-chipid"; - reg = <0x43000014 0x4>; - }; - - wkup_pmx0: pinctrl@4301c000 { - compatible = "pinctrl-single"; - reg = <0x4301c000 0x118>; - #pinctrl-cells = <1>; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0xffffffff>; - }; - - wkup_uart0: serial@42300000 { - compatible = "ti,am654-uart"; - reg = <0x42300000 0x100>; - interrupts = <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>; - clock-frequency = <48000000>; - current-speed = <115200>; - power-domains = <&k3_pds 150 TI_SCI_PD_EXCLUSIVE>; - status = "disabled"; - }; - - wkup_i2c0: i2c@42120000 { - compatible = "ti,am654-i2c", "ti,omap4-i2c"; - reg = <0x42120000 0x100>; - interrupts = <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - clock-names = "fck"; - clocks = <&k3_clks 115 1>; - power-domains = <&k3_pds 115 TI_SCI_PD_EXCLUSIVE>; - status = "disabled"; - }; - - intr_wkup_gpio: interrupt-controller@42200000 { - compatible = "ti,sci-intr"; - reg = <0x42200000 0x200>; - ti,intr-trigger-type = <1>; - interrupt-controller; - interrupt-parent = <&gic500>; - #interrupt-cells = <1>; - ti,sci = <&dmsc>; - ti,sci-dev-id = <156>; - ti,interrupt-ranges = <0 712 16>; - }; - - wkup_gpio0: gpio@42110000 { - compatible = "ti,am654-gpio", "ti,keystone-gpio"; - reg = <0x42110000 0x100>; - gpio-controller; - #gpio-cells = <2>; - interrupt-parent = <&intr_wkup_gpio>; - interrupts = <60>, <61>, <62>, <63>; - interrupt-controller; - #interrupt-cells = <2>; - ti,ngpio = <56>; - ti,davinci-gpio-unbanked = <0>; - clocks = <&k3_clks 59 0>; - clock-names = "gpio"; - }; - - wkup_vtm0: temperature-sensor@42050000 { - compatible = "ti,am654-vtm"; - reg = <0x42050000 0x25c>; - power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>; - #thermal-sensor-cells = <1>; - }; -}; diff --git a/arch/arm/dts/k3-am65.dtsi b/arch/arm/dts/k3-am65.dtsi deleted file mode 100644 index 4d7b6155a76..00000000000 --- a/arch/arm/dts/k3-am65.dtsi +++ /dev/null @@ -1,110 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device Tree Source for AM6 SoC Family - * - * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/ - */ - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/soc/ti,sci_pm_domain.h> - -#include "k3-pinctrl.h" - -/ { - model = "Texas Instruments K3 AM654 SoC"; - compatible = "ti,am654"; - interrupt-parent = <&gic500>; - #address-cells = <2>; - #size-cells = <2>; - - chosen { }; - - firmware { - optee { - compatible = "linaro,optee-tz"; - method = "smc"; - }; - - psci: psci { - compatible = "arm,psci-1.0"; - method = "smc"; - }; - }; - - a53_timer0: timer-cl0-cpu0 { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */ - <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */ - <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */ - <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */ - }; - - pmu: pmu { - compatible = "arm,cortex-a53-pmu"; - /* Recommendation from GIC500 TRM Table A.3 */ - interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; - }; - - cbass_main: bus@100000 { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */ - <0x00 0x00600000 0x00 0x00600000 0x00 0x00001100>, /* GPIO */ - <0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */ - <0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */ - <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>, /* MAIN NAVSS */ - <0x00 0x70000000 0x00 0x70000000 0x00 0x00200000>, /* MSMC SRAM */ - <0x00 0x10000000 0x00 0x10000000 0x00 0x10000000>, /* PCIe DAT */ - /* MCUSS Range */ - <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, - <0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>, - <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */ - <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, - <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, - <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00080000>, - <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, - <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, - <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, - <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, - <0x00 0x50000000 0x00 0x50000000 0x00 0x8000000>, - <0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A53 PERIPHBASE */ - <0x00 0x70000000 0x00 0x70000000 0x00 0x200000>, - <0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>, - <0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>; - - cbass_mcu: bus@28380000 { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/ - <0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>, /* First peripheral window */ - <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */ - <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */ - <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */ - <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00080000>, /* MCU SRAM */ - <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP */ - <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */ - <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */ - <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI space 1 */ - <0x00 0x50000000 0x00 0x50000000 0x00 0x8000000>, /* FSS OSPI0 data region 1 */ - <0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>, /* FSS OSPI0 data region 3*/ - <0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>; /* FSS OSPI1 data region 3*/ - - cbass_wakeup: bus@42040000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - /* WKUP Basic peripherals */ - ranges = <0x42040000 0x00 0x42040000 0x03ac2400>; - }; - }; - }; -}; - -/* Now include the peripherals for each bus segments */ -#include "k3-am65-main.dtsi" -#include "k3-am65-mcu.dtsi" -#include "k3-am65-wakeup.dtsi" diff --git a/arch/arm/dts/k3-am654-base-board.dts b/arch/arm/dts/k3-am654-base-board.dts deleted file mode 100644 index 1637ec5ab5e..00000000000 --- a/arch/arm/dts/k3-am654-base-board.dts +++ /dev/null @@ -1,630 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (C) 2016-2020 Texas Instruments Incorporated - https://www.ti.com/ - */ - -/dts-v1/; - -#include "k3-am654.dtsi" -#include <dt-bindings/input/input.h> -#include <dt-bindings/net/ti-dp83867.h> - -/ { - compatible = "ti,am654-evm", "ti,am654"; - model = "Texas Instruments AM654 Base Board"; - - aliases { - serial0 = &wkup_uart0; - serial1 = &mcu_uart0; - serial2 = &main_uart0; - i2c0 = &wkup_i2c0; - i2c1 = &mcu_i2c0; - i2c2 = &main_i2c0; - i2c3 = &main_i2c1; - i2c4 = &main_i2c2; - ethernet0 = &cpsw_port1; - mmc0 = &sdhci0; - mmc1 = &sdhci1; - }; - - chosen { - stdout-path = "serial2:115200n8"; - }; - - memory@80000000 { - device_type = "memory"; - /* 4G RAM */ - reg = <0x00000000 0x80000000 0x00000000 0x80000000>, - <0x00000008 0x80000000 0x00000000 0x80000000>; - }; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - secure_ddr: secure-ddr@9e800000 { - reg = <0 0x9e800000 0 0x01800000>; /* for OP-TEE */ - alignment = <0x1000>; - no-map; - }; - - mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { - compatible = "shared-dma-pool"; - reg = <0 0xa0000000 0 0x100000>; - no-map; - }; - - mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 { - compatible = "shared-dma-pool"; - reg = <0 0xa0100000 0 0xf00000>; - no-map; - }; - - mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { - compatible = "shared-dma-pool"; - reg = <0 0xa1000000 0 0x100000>; - no-map; - }; - - mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 { - compatible = "shared-dma-pool"; - reg = <0 0xa1100000 0 0xf00000>; - no-map; - }; - - rtos_ipc_memory_region: ipc-memories@a2000000 { - reg = <0x00 0xa2000000 0x00 0x00100000>; - alignment = <0x1000>; - no-map; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - autorepeat; - pinctrl-names = "default"; - pinctrl-0 = <&push_button_pins_default>; - - switch-5 { - label = "GPIO Key USER1"; - linux,code = <BTN_0>; - gpios = <&wkup_gpio0 24 GPIO_ACTIVE_LOW>; - }; - - switch-6 { - label = "GPIO Key USER2"; - linux,code = <BTN_1>; - gpios = <&wkup_gpio0 27 GPIO_ACTIVE_LOW>; - }; - }; - - evm_12v0: regulator-0 { - /* main supply */ - compatible = "regulator-fixed"; - regulator-name = "evm_12v0"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - regulator-always-on; - regulator-boot-on; - }; - - vcc3v3_io: regulator-1 { - /* Output of TPS54334 */ - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_io"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&evm_12v0>; - }; - - vdd_mmc1_sd: regulator-2 { - compatible = "regulator-fixed"; - regulator-name = "vdd_mmc1_sd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - enable-active-high; - vin-supply = <&vcc3v3_io>; - gpio = <&pca9554 4 GPIO_ACTIVE_HIGH>; - }; - - vtt_supply: regulator-3 { - compatible = "regulator-fixed"; - regulator-name = "vtt"; - pinctrl-names = "default"; - pinctrl-0 = <&ddr_vtt_pins_default>; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc3v3_io>; - gpio = <&wkup_gpio0 28 GPIO_ACTIVE_HIGH>; - }; -}; - -&wkup_pmx0 { - wkup_uart0_pins_default: wkup-uart0-default-pins { - pinctrl-single,pins = < - AM65X_WKUP_IOPAD(0x00a0, PIN_INPUT, 0) /* (AB1) WKUP_UART0_RXD */ - AM65X_WKUP_IOPAD(0x00a4, PIN_OUTPUT, 0) /* (AB5) WKUP_UART0_TXD */ - AM65X_WKUP_IOPAD(0x00c8, PIN_INPUT, 1) /* (AC2) WKUP_GPIO0_6.WKUP_UART0_CTSn */ - AM65X_WKUP_IOPAD(0x00cc, PIN_OUTPUT, 1) /* (AC1) WKUP_GPIO0_7.WKUP_UART0_RTSn */ - >; - }; - - ddr_vtt_pins_default: ddr-vtt-default-pins { - pinctrl-single,pins = < - AM65X_WKUP_IOPAD(0x0040, PIN_OUTPUT_PULLUP, 7) /* WKUP_GPIO0_28 */ - >; - }; - - wkup_i2c0_pins_default: wkup-i2c0-default-pins { - pinctrl-single,pins = < - AM65X_WKUP_IOPAD(0x00e0, PIN_INPUT, 0) /* (AC7) WKUP_I2C0_SCL */ - AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT, 0) /* (AD6) WKUP_I2C0_SDA */ - >; - }; - - push_button_pins_default: push-button-default-pins { - pinctrl-single,pins = < - AM65X_WKUP_IOPAD(0x0030, PIN_INPUT, 7) /* (R5) WKUP_GPIO0_24 */ - AM65X_WKUP_IOPAD(0x003c, PIN_INPUT, 7) /* (P2) WKUP_GPIO0_27 */ - >; - }; - - mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins { - pinctrl-single,pins = < - AM65X_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* (V1) MCU_OSPI0_CLK */ - AM65X_WKUP_IOPAD(0x0008, PIN_INPUT, 0) /* (U2) MCU_OSPI0_DQS */ - AM65X_WKUP_IOPAD(0x000c, PIN_INPUT, 0) /* (U4) MCU_OSPI0_D0 */ - AM65X_WKUP_IOPAD(0x0010, PIN_INPUT, 0) /* (U5) MCU_OSPI0_D1 */ - AM65X_WKUP_IOPAD(0x0014, PIN_INPUT, 0) /* (T2) MCU_OSPI0_D2 */ - AM65X_WKUP_IOPAD(0x0018, PIN_INPUT, 0) /* (T3) MCU_OSPI0_D3 */ - AM65X_WKUP_IOPAD(0x001c, PIN_INPUT, 0) /* (T4) MCU_OSPI0_D4 */ - AM65X_WKUP_IOPAD(0x0020, PIN_INPUT, 0) /* (T5) MCU_OSPI0_D5 */ - AM65X_WKUP_IOPAD(0x0024, PIN_INPUT, 0) /* (R2) MCU_OSPI0_D6 */ - AM65X_WKUP_IOPAD(0x0028, PIN_INPUT, 0) /* (R3) MCU_OSPI0_D7 */ - AM65X_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* (R4) MCU_OSPI0_CSn0 */ - >; - }; - - wkup_pca554_default: wkup-pca554-default-pins { - pinctrl-single,pins = < - AM65X_WKUP_IOPAD(0x0034, PIN_INPUT, 7) /* (T1) MCU_OSPI1_CLK.WKUP_GPIO0_25 */ - >; - }; - - mcu_uart0_pins_default: mcu-uart0-default-pins { - pinctrl-single,pins = < - AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 4) /* (P4) MCU_OSPI1_D1.MCU_UART0_RXD */ - AM65X_WKUP_IOPAD(0x0048, PIN_OUTPUT, 4) /* (P5) MCU_OSPI1_D2.MCU_UART0_TXD */ - AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 4) /* (P1) MCU_OSPI1_D3.MCU_UART0_CTSn */ - AM65X_WKUP_IOPAD(0x0054, PIN_OUTPUT, 4) /* (N3) MCU_OSPI1_CSn1.MCU_UART0_RTSn */ - >; - }; - - mcu_cpsw_pins_default: mcu-cpsw-default-pins { - pinctrl-single,pins = < - AM65X_WKUP_IOPAD(0x0058, PIN_OUTPUT, 0) /* (N4) MCU_RGMII1_TX_CTL */ - AM65X_WKUP_IOPAD(0x005c, PIN_INPUT, 0) /* (N5) MCU_RGMII1_RX_CTL */ - AM65X_WKUP_IOPAD(0x0060, PIN_OUTPUT, 0) /* (M2) MCU_RGMII1_TD3 */ - AM65X_WKUP_IOPAD(0x0064, PIN_OUTPUT, 0) /* (M3) MCU_RGMII1_TD2 */ - AM65X_WKUP_IOPAD(0x0068, PIN_OUTPUT, 0) /* (M4) MCU_RGMII1_TD1 */ - AM65X_WKUP_IOPAD(0x006c, PIN_OUTPUT, 0) /* (M5) MCU_RGMII1_TD0 */ - AM65X_WKUP_IOPAD(0x0078, PIN_INPUT, 0) /* (L2) MCU_RGMII1_RD3 */ - AM65X_WKUP_IOPAD(0x007c, PIN_INPUT, 0) /* (L5) MCU_RGMII1_RD2 */ - AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* (M6) MCU_RGMII1_RD1 */ - AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* (L6) MCU_RGMII1_RD0 */ - AM65X_WKUP_IOPAD(0x0070, PIN_OUTPUT, 0) /* (N1) MCU_RGMII1_TXC */ - AM65X_WKUP_IOPAD(0x0074, PIN_INPUT, 0) /* (M1) MCU_RGMII1_RXC */ - >; - }; - - mcu_mdio_pins_default: mcu-mdio1-default-pins { - pinctrl-single,pins = < - AM65X_WKUP_IOPAD(0x008c, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */ - AM65X_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */ - >; - }; - - mcu_i2c0_pins_default: mcu-i2c0-default-pins { - pinctrl-single,pins = < - AM65X_WKUP_IOPAD(0x00e8, PIN_INPUT, 0) /* (AD8) MCU_I2C0_SCL */ - AM65X_WKUP_IOPAD(0x00ec, PIN_INPUT, 0) /* (AD7) MCU_I2C0_SDA */ - >; - }; -}; - -&main_pmx0 { - main_uart0_pins_default: main-uart0-default-pins { - pinctrl-single,pins = < - AM65X_IOPAD(0x01e4, PIN_INPUT, 0) /* (AF11) UART0_RXD */ - AM65X_IOPAD(0x01e8, PIN_OUTPUT, 0) /* (AE11) UART0_TXD */ - AM65X_IOPAD(0x01ec, PIN_INPUT, 0) /* (AG11) UART0_CTSn */ - AM65X_IOPAD(0x01f0, PIN_OUTPUT, 0) /* (AD11) UART0_RTSn */ - >; - }; - - main_i2c2_pins_default: main-i2c2-default-pins { - pinctrl-single,pins = < - AM65X_IOPAD(0x0074, PIN_INPUT, 5) /* (T27) GPMC0_CSn3.I2C2_SCL */ - AM65X_IOPAD(0x0070, PIN_INPUT, 5) /* (R25) GPMC0_CSn2.I2C2_SDA */ - >; - }; - - main_spi0_pins_default: main-spi0-default-pins { - pinctrl-single,pins = < - AM65X_IOPAD(0x01c4, PIN_INPUT, 0) /* (AH13) SPI0_CLK */ - AM65X_IOPAD(0x01c8, PIN_INPUT, 0) /* (AE13) SPI0_D0 */ - AM65X_IOPAD(0x01cc, PIN_INPUT, 0) /* (AD13) SPI0_D1 */ - AM65X_IOPAD(0x01bc, PIN_OUTPUT, 0) /* (AG13) SPI0_CS0 */ - >; - }; - - main_mmc0_pins_default: main-mmc0-default-pins { - pinctrl-single,pins = < - AM65X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN, 0) /* (B25) MMC0_CLK */ - AM65X_IOPAD(0x01ac, PIN_INPUT_PULLUP, 0) /* (B27) MMC0_CMD */ - AM65X_IOPAD(0x01a4, PIN_INPUT_PULLUP, 0) /* (A26) MMC0_DAT0 */ - AM65X_IOPAD(0x01a0, PIN_INPUT_PULLUP, 0) /* (E25) MMC0_DAT1 */ - AM65X_IOPAD(0x019c, PIN_INPUT_PULLUP, 0) /* (C26) MMC0_DAT2 */ - AM65X_IOPAD(0x0198, PIN_INPUT_PULLUP, 0) /* (A25) MMC0_DAT3 */ - AM65X_IOPAD(0x0194, PIN_INPUT_PULLUP, 0) /* (E24) MMC0_DAT4 */ - AM65X_IOPAD(0x0190, PIN_INPUT_PULLUP, 0) /* (A24) MMC0_DAT5 */ - AM65X_IOPAD(0x018c, PIN_INPUT_PULLUP, 0) /* (B26) MMC0_DAT6 */ - AM65X_IOPAD(0x0188, PIN_INPUT_PULLUP, 0) /* (D25) MMC0_DAT7 */ - AM65X_IOPAD(0x01b4, PIN_INPUT_PULLUP, 0) /* (A23) MMC0_SDCD */ - AM65X_IOPAD(0x01b0, PIN_INPUT, 0) /* (C25) MMC0_DS */ - >; - }; - - main_mmc1_pins_default: main-mmc1-default-pins { - pinctrl-single,pins = < - AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN, 0) /* (C27) MMC1_CLK */ - AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP, 0) /* (C28) MMC1_CMD */ - AM65X_IOPAD(0x02d0, PIN_INPUT_PULLUP, 0) /* (D28) MMC1_DAT0 */ - AM65X_IOPAD(0x02cc, PIN_INPUT_PULLUP, 0) /* (E27) MMC1_DAT1 */ - AM65X_IOPAD(0x02c8, PIN_INPUT_PULLUP, 0) /* (D26) MMC1_DAT2 */ - AM65X_IOPAD(0x02c4, PIN_INPUT_PULLUP, 0) /* (D27) MMC1_DAT3 */ - AM65X_IOPAD(0x02dc, PIN_INPUT_PULLUP, 0) /* (B24) MMC1_SDCD */ - AM65X_IOPAD(0x02e0, PIN_INPUT, 0) /* (C24) MMC1_SDWP */ - >; - }; - - usb1_pins_default: usb1-default-pins { - pinctrl-single,pins = < - AM65X_IOPAD(0x02c0, PIN_OUTPUT, 0) /* (AC8) USB1_DRVVBUS */ - >; - }; -}; - -&main_pmx1 { - main_i2c0_pins_default: main-i2c0-default-pins { - pinctrl-single,pins = < - AM65X_IOPAD(0x0000, PIN_INPUT, 0) /* (D20) I2C0_SCL */ - AM65X_IOPAD(0x0004, PIN_INPUT, 0) /* (C21) I2C0_SDA */ - >; - }; - - main_i2c1_pins_default: main-i2c1-default-pins { - pinctrl-single,pins = < - AM65X_IOPAD(0x0008, PIN_INPUT, 0) /* (B21) I2C1_SCL */ - AM65X_IOPAD(0x000c, PIN_INPUT, 0) /* (E21) I2C1_SDA */ - >; - }; - - ecap0_pins_default: ecap0-default-pins { - pinctrl-single,pins = < - AM65X_IOPAD(0x0010, PIN_INPUT, 0) /* (D21) ECAP0_IN_APWM_OUT */ - >; - }; -}; - -&wkup_uart0 { - /* Wakeup UART is used by System firmware */ - status = "reserved"; - pinctrl-names = "default"; - pinctrl-0 = <&wkup_uart0_pins_default>; -}; - -&mcu_uart0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&mcu_uart0_pins_default>; -}; - -&main_uart0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&main_uart0_pins_default>; - power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>; -}; - -&wkup_i2c0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&wkup_i2c0_pins_default>; - clock-frequency = <400000>; - - eeprom@50 { - /* AT24CM01 */ - compatible = "atmel,24c1024"; - reg = <0x50>; - }; - - vdd_mpu: regulator@60 { - compatible = "ti,tps62363"; - reg = <0x60>; - regulator-name = "VDD_MPU"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1770000>; - regulator-always-on; - regulator-boot-on; - ti,vsel0-state-high; - ti,vsel1-state-high; - ti,enable-vout-discharge; - }; - - gpio@38 { - compatible = "nxp,pca9554"; - reg = <0x38>; - gpio-controller; - #gpio-cells = <2>; - }; - - pca9554: gpio@39 { - compatible = "nxp,pca9554"; - reg = <0x39>; - gpio-controller; - #gpio-cells = <2>; - pinctrl-names = "default"; - pinctrl-0 = <&wkup_pca554_default>; - interrupt-parent = <&wkup_gpio0>; - interrupts = <25 IRQ_TYPE_EDGE_FALLING>; - interrupt-controller; - #interrupt-cells = <2>; - }; -}; - -&mcu_i2c0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&mcu_i2c0_pins_default>; - clock-frequency = <400000>; -}; - -&main_i2c0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&main_i2c0_pins_default>; - clock-frequency = <400000>; - - pca9555: gpio@21 { - compatible = "nxp,pca9555"; - reg = <0x21>; - gpio-controller; - #gpio-cells = <2>; - }; -}; - -&main_i2c1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&main_i2c1_pins_default>; - clock-frequency = <400000>; -}; - -&main_i2c2 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&main_i2c2_pins_default>; - clock-frequency = <400000>; -}; - -&ecap0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&ecap0_pins_default>; -}; - -&main_spi0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&main_spi0_pins_default>; - #address-cells = <1>; - #size-cells = <0>; - ti,pindir-d0-out-d1-in; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0x0>; - spi-tx-bus-width = <1>; - spi-rx-bus-width = <1>; - spi-max-frequency = <48000000>; - }; -}; - -&sdhci0 { - pinctrl-names = "default"; - pinctrl-0 = <&main_mmc0_pins_default>; - bus-width = <8>; - non-removable; - ti,driver-strength-ohm = <50>; - disable-wp; -}; - -/* - * Because of erratas i2025 and i2026 for silicon revision 1.0, the - * SD card interface might fail. Boards with sr1.0 are recommended to - * disable sdhci1 - */ -&sdhci1 { - vmmc-supply = <&vdd_mmc1_sd>; - pinctrl-names = "default"; - pinctrl-0 = <&main_mmc1_pins_default>; - ti,driver-strength-ohm = <50>; - disable-wp; -}; - -&usb1 { - pinctrl-names = "default"; - pinctrl-0 = <&usb1_pins_default>; - dr_mode = "otg"; -}; - -&dwc3_0 { - status = "disabled"; -}; - -&usb0_phy { - status = "disabled"; -}; - -&tscadc0 { - status = "okay"; - adc { - ti,adc-channels = <0 1 2 3 4 5 6 7>; - }; -}; - -&tscadc1 { - status = "okay"; - adc { - ti,adc-channels = <0 1 2 3 4 5 6 7>; - }; -}; - -&serdes0 { - status = "disabled"; -}; - -&serdes1 { - status = "disabled"; -}; - -&mailbox0_cluster0 { - status = "okay"; - interrupts = <436>; - - mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 { - ti,mbox-tx = <1 0 0>; - ti,mbox-rx = <0 0 0>; - }; -}; - -&mailbox0_cluster1 { - status = "okay"; - interrupts = <432>; - - mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 { - ti,mbox-tx = <1 0 0>; - ti,mbox-rx = <0 0 0>; - }; -}; - -&mcu_r5fss0_core0 { - memory-region = <&mcu_r5fss0_core0_dma_memory_region>, - <&mcu_r5fss0_core0_memory_region>; - mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>; -}; - -&mcu_r5fss0_core1 { - memory-region = <&mcu_r5fss0_core1_dma_memory_region>, - <&mcu_r5fss0_core1_memory_region>; - mboxes = <&mailbox0_cluster1>, <&mbox_mcu_r5fss0_core1>; -}; - -&ospi0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&mcu_fss0_ospi0_pins_default>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0x0>; - spi-tx-bus-width = <8>; - spi-rx-bus-width = <8>; - spi-max-frequency = <25000000>; - cdns,tshsl-ns = <60>; - cdns,tsd2d-ns = <60>; - cdns,tchsh-ns = <60>; - cdns,tslch-ns = <60>; - cdns,read-delay = <0>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "ospi.tiboot3"; - reg = <0x0 0x80000>; - }; - - partition@80000 { - label = "ospi.tispl"; - reg = <0x80000 0x200000>; - }; - - partition@280000 { - label = "ospi.u-boot"; - reg = <0x280000 0x400000>; - }; - - partition@680000 { - label = "ospi.env"; - reg = <0x680000 0x20000>; - }; - - partition@6a0000 { - label = "ospi.env.backup"; - reg = <0x6a0000 0x20000>; - }; - - partition@6c0000 { - label = "ospi.sysfw"; - reg = <0x6c0000 0x100000>; - }; - - partition@800000 { - label = "ospi.rootfs"; - reg = <0x800000 0x37c0000>; - }; - - partition@3fe0000 { - label = "ospi.phypattern"; - reg = <0x3fe0000 0x20000>; - }; - }; - }; -}; - -&mcu_cpsw { - pinctrl-names = "default"; - pinctrl-0 = <&mcu_cpsw_pins_default>; -}; - -&davinci_mdio { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&mcu_mdio_pins_default>; - - phy0: ethernet-phy@0 { - reg = <0>; - ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; - ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; - }; -}; - -&cpsw_port1 { - phy-mode = "rgmii-rxid"; - phy-handle = <&phy0>; -}; - -&dss { - status = "disabled"; -}; diff --git a/arch/arm/dts/k3-am654-icssg2.dtso b/arch/arm/dts/k3-am654-icssg2.dtso deleted file mode 100644 index faefa2febcf..00000000000 --- a/arch/arm/dts/k3-am654-icssg2.dtso +++ /dev/null @@ -1,145 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/** - * DT overlay for enabling ICSSG2 on AM654 EVM - * - * Copyright (C) 2018-2023 Texas Instruments Incorporated - https://www.ti.com/ - */ - -/dts-v1/; -/plugin/; - -#include <dt-bindings/net/ti-dp83867.h> -#include "k3-pinctrl.h" - -&{/} { - aliases { - ethernet1 = "/icssg2-eth/ethernet-ports/port@0"; - ethernet2 = "/icssg2-eth/ethernet-ports/port@1"; - }; - - /* Ethernet node on PRU-ICSSG2 */ - icssg2_eth: icssg2-eth { - compatible = "ti,am654-icssg-prueth"; - pinctrl-names = "default"; - pinctrl-0 = <&icssg2_rgmii_pins_default>; - sram = <&msmc_ram>; - ti,prus = <&pru2_0>, <&rtu2_0>, <&tx_pru2_0>, - <&pru2_1>, <&rtu2_1>, <&tx_pru2_1>; - firmware-name = "ti-pruss/am65x-sr2-pru0-prueth-fw.elf", - "ti-pruss/am65x-sr2-rtu0-prueth-fw.elf", - "ti-pruss/am65x-sr2-txpru0-prueth-fw.elf", - "ti-pruss/am65x-sr2-pru1-prueth-fw.elf", - "ti-pruss/am65x-sr2-rtu1-prueth-fw.elf", - "ti-pruss/am65x-sr2-txpru1-prueth-fw.elf"; - - ti,pruss-gp-mux-sel = <2>, /* MII mode */ - <2>, - <2>, - <2>, /* MII mode */ - <2>, - <2>; - - ti,mii-g-rt = <&icssg2_mii_g_rt>; - ti,mii-rt = <&icssg2_mii_rt>; - ti,iep = <&icssg2_iep0>, <&icssg2_iep1>; - - interrupt-parent = <&icssg2_intc>; - interrupts = <24 0 2>, <25 1 3>; - interrupt-names = "tx_ts0", "tx_ts1"; - - dmas = <&main_udmap 0xc300>, /* egress slice 0 */ - <&main_udmap 0xc301>, /* egress slice 0 */ - <&main_udmap 0xc302>, /* egress slice 0 */ - <&main_udmap 0xc303>, /* egress slice 0 */ - <&main_udmap 0xc304>, /* egress slice 1 */ - <&main_udmap 0xc305>, /* egress slice 1 */ - <&main_udmap 0xc306>, /* egress slice 1 */ - <&main_udmap 0xc307>, /* egress slice 1 */ - <&main_udmap 0x4300>, /* ingress slice 0 */ - <&main_udmap 0x4301>; /* ingress slice 1 */ - - dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3", - "tx1-0", "tx1-1", "tx1-2", "tx1-3", - "rx0", "rx1"; - ethernet-ports { - #address-cells = <1>; - #size-cells = <0>; - icssg2_emac0: port@0 { - reg = <0>; - phy-handle = <&icssg2_phy0>; - phy-mode = "rgmii-id"; - ti,syscon-rgmii-delay = <&scm_conf 0x4120>; - /* Filled in by bootloader */ - local-mac-address = [00 00 00 00 00 00]; - }; - icssg2_emac1: port@1 { - reg = <1>; - phy-handle = <&icssg2_phy1>; - phy-mode = "rgmii-id"; - ti,syscon-rgmii-delay = <&scm_conf 0x4124>; - /* Filled in by bootloader */ - local-mac-address = [00 00 00 00 00 00]; - }; - }; - }; -}; - -&main_pmx0 { - - icssg2_mdio_pins_default: icssg2-mdio-default-pins { - pinctrl-single,pins = < - AM65X_IOPAD(0x0094, PIN_INPUT, 2) /* (AC19) PRG2_PRU0_GPO7.PRG2_MDIO0_MDIO */ - AM65X_IOPAD(0x00c8, PIN_OUTPUT, 2) /* (AE15) PRG2_PRU1_GPO7.PRG2_MDIO0_MDC */ - >; - }; - - icssg2_rgmii_pins_default: icssg2-rgmii-default-pins { - pinctrl-single,pins = < - AM65X_IOPAD(0x00ac, PIN_INPUT, 2) /* (AH15) PRG2_PRU1_GPO0.PRG2_RGMII2_RD0 */ - AM65X_IOPAD(0x00b0, PIN_INPUT, 2) /* (AC16) PRG2_PRU1_GPO1.PRG2_RGMII2_RD1 */ - AM65X_IOPAD(0x00b4, PIN_INPUT, 2) /* (AD17) PRG2_PRU1_GPO2.PRG2_RGMII2_RD2 */ - AM65X_IOPAD(0x00b8, PIN_INPUT, 2) /* (AH14) PRG2_PRU1_GPO3.PRG2_RGMII2_RD3 */ - AM65X_IOPAD(0x00cc, PIN_OUTPUT, 2) /* (AD15) PRG2_PRU1_GPO8.PRG2_RGMII2_TD0 */ - AM65X_IOPAD(0x00d0, PIN_OUTPUT, 2) /* (AF14) PRG2_PRU1_GPO9.PRG2_RGMII2_TD1 */ - AM65X_IOPAD(0x00d4, PIN_OUTPUT, 2) /* (AC15) PRG2_PRU1_GPO10.PRG2_RGMII2_TD2 */ - AM65X_IOPAD(0x00d8, PIN_OUTPUT, 2) /* (AD14) PRG2_PRU1_GPO11.PRG2_RGMII2_TD3 */ - AM65X_IOPAD(0x00dc, PIN_INPUT, 2) /* (AE14) PRG2_PRU1_GPO16.PRG2_RGMII2_TXC */ - AM65X_IOPAD(0x00c4, PIN_OUTPUT, 2) /* (AC17) PRG2_PRU1_GPO6.PRG2_RGMII2_TX_CTL */ - AM65X_IOPAD(0x00c0, PIN_INPUT, 2) /* (AG15) PRG2_PRU1_GPO5.PRG2_RGMII2_RXC */ - AM65X_IOPAD(0x00bc, PIN_INPUT, 2) /* (AG14) PRG2_PRU1_GPO4.PRG2_RGMII2_RX_CTL */ - - AM65X_IOPAD(0x0078, PIN_INPUT, 2) /* (AF18) PRG2_PRU0_GPO0.PRG2_RGMII1_RD0 */ - AM65X_IOPAD(0x007c, PIN_INPUT, 2) /* (AE18) PRG2_PRU0_GPO1.PRG2_RGMII1_RD1 */ - AM65X_IOPAD(0x0080, PIN_INPUT, 2) /* (AH17) PRG2_PRU0_GPO2.PRG2_RGMII1_RD2 */ - AM65X_IOPAD(0x0084, PIN_INPUT, 2) /* (AG18) PRG2_PRU0_GPO3.PRG2_RGMII1_RD3 */ - AM65X_IOPAD(0x0098, PIN_OUTPUT, 2) /* (AH16) PRG2_PRU0_GPO8.PRG2_RGMII1_TD0 */ - AM65X_IOPAD(0x009c, PIN_OUTPUT, 2) /* (AG16) PRG2_PRU0_GPO9.PRG2_RGMII1_TD1 */ - AM65X_IOPAD(0x00a0, PIN_OUTPUT, 2) /* (AF16) PRG2_PRU0_GPO10.PRG2_RGMII1_TD2 */ - AM65X_IOPAD(0x00a4, PIN_OUTPUT, 2) /* (AE16) PRG2_PRU0_GPO11.PRG2_RGMII1_TD3 */ - AM65X_IOPAD(0x00a8, PIN_INPUT, 2) /* (AD16) PRG2_PRU0_GPO16.PRG2_RGMII1_TXC */ - AM65X_IOPAD(0x0090, PIN_OUTPUT, 2) /* (AE17) PRG2_PRU0_GPO6.PRG2_RGMII1_TX_CTL */ - AM65X_IOPAD(0x008c, PIN_INPUT, 2) /* (AF17) PRG2_PRU0_GPO5.PRG2_RGMII1_RXC */ - AM65X_IOPAD(0x0088, PIN_INPUT, 2) /* (AG17) PRG2_PRU0_GPO4.PRG2_RGMII1_RX_CTL */ - >; - }; -}; - -&icssg2_mdio { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&icssg2_mdio_pins_default>; - #address-cells = <1>; - #size-cells = <0>; - - icssg2_phy0: ethernet-phy@0 { - reg = <0>; - ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; - ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; - }; - - icssg2_phy1: ethernet-phy@3 { - reg = <3>; - ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; - ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; - }; -}; diff --git a/arch/arm/dts/k3-am654-industrial-thermal.dtsi b/arch/arm/dts/k3-am654-industrial-thermal.dtsi deleted file mode 100644 index 9021c738056..00000000000 --- a/arch/arm/dts/k3-am654-industrial-thermal.dtsi +++ /dev/null @@ -1,45 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 - -#include <dt-bindings/thermal/thermal.h> - -mpu0_thermal: mpu0-thermal { - polling-delay-passive = <250>; /* milliseconds */ - polling-delay = <500>; /* milliseconds */ - thermal-sensors = <&wkup_vtm0 0>; - - trips { - mpu0_crit: mpu0-crit { - temperature = <125000>; /* milliCelsius */ - hysteresis = <2000>; /* milliCelsius */ - type = "critical"; - }; - }; -}; - -mpu1_thermal: mpu1-thermal { - polling-delay-passive = <250>; /* milliseconds */ - polling-delay = <500>; /* milliseconds */ - thermal-sensors = <&wkup_vtm0 1>; - - trips { - mpu1_crit: mpu1-crit { - temperature = <125000>; /* milliCelsius */ - hysteresis = <2000>; /* milliCelsius */ - type = "critical"; - }; - }; -}; - -mcu_thermal: mcu-thermal { - polling-delay-passive = <250>; /* milliseconds */ - polling-delay = <500>; /* milliseconds */ - thermal-sensors = <&wkup_vtm0 2>; - - trips { - mcu_crit: mcu-crit { - temperature = <125000>; /* milliCelsius */ - hysteresis = <2000>; /* milliCelsius */ - type = "critical"; - }; - }; -}; diff --git a/arch/arm/dts/k3-am654.dtsi b/arch/arm/dts/k3-am654.dtsi deleted file mode 100644 index 888567b921f..00000000000 --- a/arch/arm/dts/k3-am654.dtsi +++ /dev/null @@ -1,122 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device Tree Source for AM6 SoC family in Quad core configuration - * - * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/ - */ - -#include "k3-am65.dtsi" - -/ { - cpus { - #address-cells = <1>; - #size-cells = <0>; - cpu-map { - cluster0: cluster0 { - core0 { - cpu = <&cpu0>; - }; - - core1 { - cpu = <&cpu1>; - }; - }; - - cluster1: cluster1 { - core0 { - cpu = <&cpu2>; - }; - - core1 { - cpu = <&cpu3>; - }; - }; - }; - - cpu0: cpu@0 { - compatible = "arm,cortex-a53"; - reg = <0x000>; - device_type = "cpu"; - enable-method = "psci"; - i-cache-size = <0x8000>; - i-cache-line-size = <64>; - i-cache-sets = <256>; - d-cache-size = <0x8000>; - d-cache-line-size = <64>; - d-cache-sets = <128>; - next-level-cache = <&L2_0>; - }; - - cpu1: cpu@1 { - compatible = "arm,cortex-a53"; - reg = <0x001>; - device_type = "cpu"; - enable-method = "psci"; - i-cache-size = <0x8000>; - i-cache-line-size = <64>; - i-cache-sets = <256>; - d-cache-size = <0x8000>; - d-cache-line-size = <64>; - d-cache-sets = <128>; - next-level-cache = <&L2_0>; - }; - - cpu2: cpu@100 { - compatible = "arm,cortex-a53"; - reg = <0x100>; - device_type = "cpu"; - enable-method = "psci"; - i-cache-size = <0x8000>; - i-cache-line-size = <64>; - i-cache-sets = <256>; - d-cache-size = <0x8000>; - d-cache-line-size = <64>; - d-cache-sets = <128>; - next-level-cache = <&L2_1>; - }; - - cpu3: cpu@101 { - compatible = "arm,cortex-a53"; - reg = <0x101>; - device_type = "cpu"; - enable-method = "psci"; - i-cache-size = <0x8000>; - i-cache-line-size = <64>; - i-cache-sets = <256>; - d-cache-size = <0x8000>; - d-cache-line-size = <64>; - d-cache-sets = <128>; - next-level-cache = <&L2_1>; - }; - }; - - L2_0: l2-cache0 { - compatible = "cache"; - cache-level = <2>; - cache-unified; - cache-size = <0x80000>; - cache-line-size = <64>; - cache-sets = <512>; - next-level-cache = <&msmc_l3>; - }; - - L2_1: l2-cache1 { - compatible = "cache"; - cache-level = <2>; - cache-unified; - cache-size = <0x80000>; - cache-line-size = <64>; - cache-sets = <512>; - next-level-cache = <&msmc_l3>; - }; - - msmc_l3: l3-cache0 { - compatible = "cache"; - cache-level = <3>; - cache-unified; - }; - - thermal_zones: thermal-zones { - #include "k3-am654-industrial-thermal.dtsi" - }; -}; diff --git a/arch/arm/dts/k3-am65x-binman.dtsi b/arch/arm/dts/k3-am65x-binman.dtsi index d0cd4889cde..350775e42c2 100644 --- a/arch/arm/dts/k3-am65x-binman.dtsi +++ b/arch/arm/dts/k3-am65x-binman.dtsi @@ -95,10 +95,10 @@ #ifdef CONFIG_TARGET_AM654_A53_EVM -#define SPL_AM654_EVM_DTB "spl/dts/k3-am654-base-board.dtb" +#define SPL_AM654_EVM_DTB "spl/dts/ti/k3-am654-base-board.dtb" #define AM654_EVM_DTB "u-boot.dtb" -#define AM654_EVM_ICSSG2_DTBO "arch/arm/dts/k3-am654-icssg2.dtbo" +#define AM654_EVM_ICSSG2_DTBO "ti/k3-am654-icssg2.dtbo" &binman { ti-spl { diff --git a/arch/arm/dts/k3-am68-sk-base-board-u-boot.dtsi b/arch/arm/dts/k3-am68-sk-base-board-u-boot.dtsi index 4b8d73a92d6..4ca05f32f0b 100644 --- a/arch/arm/dts/k3-am68-sk-base-board-u-boot.dtsi +++ b/arch/arm/dts/k3-am68-sk-base-board-u-boot.dtsi @@ -109,10 +109,6 @@ bootph-all; }; -&ospi0 { - status = "disabled"; -}; - &ospi1 { status = "disabled"; }; diff --git a/arch/arm/dts/k3-am68-sk-r5-base-board.dts b/arch/arm/dts/k3-am68-sk-r5-base-board.dts index 3b2d7af2e52..b61d22b3b4b 100644 --- a/arch/arm/dts/k3-am68-sk-r5-base-board.dts +++ b/arch/arm/dts/k3-am68-sk-r5-base-board.dts @@ -10,3 +10,8 @@ #include "k3-j721s2-ddr.dtsi" #include "k3-am68-sk-base-board-u-boot.dtsi" #include "k3-j721s2-r5.dtsi" + +&wkup_vtm0 { + bootph-pre-ram; + vdd-supply-2 = <&tps62873a>; +}; diff --git a/arch/arm/dts/k3-j7200-r5-common-proc-board.dts b/arch/arm/dts/k3-j7200-r5-common-proc-board.dts index f096b102793..ecb1dd49c64 100644 --- a/arch/arm/dts/k3-j7200-r5-common-proc-board.dts +++ b/arch/arm/dts/k3-j7200-r5-common-proc-board.dts @@ -23,11 +23,12 @@ <&k3_pds 202 TI_SCI_PD_EXCLUSIVE>, <&k3_pds 4 TI_SCI_PD_EXCLUSIVE>; resets = <&k3_reset 202 0>; - clocks = <&k3_clks 61 1>, <&k3_clks 202 2>; - clock-names = "gtc", "core"; - assigned-clocks = <&k3_clks 202 2>, <&k3_clks 61 1>, <&k3_clks 323 0>; - assigned-clock-parents= <0>, <0>, <&k3_clks 323 2>; - assigned-clock-rates = <2000000000>, <200000000>; + clocks = <&k3_clks 61 1>, <&k3_clks 202 2>, <&k3_clks 4 1> ; + clock-names = "gtc", "core", "msmc"; + assigned-clocks = <&k3_clks 202 2>, <&k3_clks 61 1>, <&k3_clks 4 1>, + <&k3_clks 323 0>; + assigned-clock-parents= <0>, <0>, <0>, <&k3_clks 323 2>; + assigned-clock-rates = <2000000000>, <200000000>, <1000000000>; ti,sci = <&dmsc>; ti,sci-proc-id = <32>; ti,sci-host-id = <10>; @@ -53,6 +54,10 @@ }; &mcu_timer0 { + /delete-property/ clocks; + /delete-property/ clocks-names; + /delete-property/ assigned-clocks; + /delete-property/ assigned-clock-parents; clock-frequency = <250000000>; bootph-pre-ram; }; @@ -96,6 +101,13 @@ <0x0 0x50000000 0x0 0x50000000 0x0 0x08000000>; }; +&hbmc { + reg = <0x0 0x47040000 0x0 0x100>, + <0x0 0x50000000 0x0 0x8000000>; + ranges = <0x0 0x0 0x0 0x50000000 0x4000000>, + <0x1 0x0 0x0 0x54000000 0x800000>; +}; + &mcu_ringacc { ti,sci = <&dm_tifs>; }; diff --git a/arch/arm/dts/k3-j721e-beagleboneai64-u-boot.dtsi b/arch/arm/dts/k3-j721e-beagleboneai64-u-boot.dtsi index 27851b7d083..8cefa39290d 100644 --- a/arch/arm/dts/k3-j721e-beagleboneai64-u-boot.dtsi +++ b/arch/arm/dts/k3-j721e-beagleboneai64-u-boot.dtsi @@ -206,10 +206,10 @@ #ifdef CONFIG_TARGET_J721E_A72_BEAGLEBONEAI64 #define SPL_NODTB "spl/u-boot-spl-nodtb.bin" -#define SPL_J721E_BBAI64_DTB "spl/dts/k3-j721e-beagleboneai64.dtb" +#define SPL_J721E_BBAI64_DTB "spl/dts/ti/k3-j721e-beagleboneai64.dtb" #define UBOOT_NODTB "u-boot-nodtb.bin" -#define J721E_BBAI64_DTB "arch/arm/dts/k3-j721e-beagleboneai64.dtb" +#define J721E_BBAI64_DTB "dts/upstream/src/arm64/ti/k3-j721e-beagleboneai64.dtb" &binman { ti-dm { diff --git a/arch/arm/dts/k3-j721e-beagleboneai64.dts b/arch/arm/dts/k3-j721e-beagleboneai64.dts deleted file mode 100644 index 2f954729f35..00000000000 --- a/arch/arm/dts/k3-j721e-beagleboneai64.dts +++ /dev/null @@ -1,993 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * https://beagleboard.org/ai-64 - * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/ - * Copyright (C) 2022 Jason Kridner, BeagleBoard.org Foundation - * Copyright (C) 2022 Robert Nelson, BeagleBoard.org Foundation - */ - -/dts-v1/; - -#include "k3-j721e.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/net/ti-dp83867.h> -#include <dt-bindings/phy/phy-cadence.h> - -/ { - compatible = "beagle,j721e-beagleboneai64", "ti,j721e"; - model = "BeagleBoard.org BeagleBone AI-64"; - - aliases { - serial0 = &wkup_uart0; - serial2 = &main_uart0; - mmc0 = &main_sdhci0; - mmc1 = &main_sdhci1; - i2c0 = &wkup_i2c0; - i2c1 = &main_i2c6; - i2c2 = &main_i2c2; - i2c3 = &main_i2c4; - }; - - chosen { - stdout-path = "serial2:115200n8"; - }; - - memory@80000000 { - device_type = "memory"; - /* 4G RAM */ - reg = <0x00000000 0x80000000 0x00000000 0x80000000>, - <0x00000008 0x80000000 0x00000000 0x80000000>; - }; - - reserved_memory: reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - secure_ddr: optee@9e800000 { - reg = <0x00 0x9e800000 0x00 0x01800000>; - no-map; - }; - - mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa0000000 0x00 0x100000>; - no-map; - }; - - mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa0100000 0x00 0xf00000>; - no-map; - }; - - mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa1000000 0x00 0x100000>; - no-map; - }; - - mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa1100000 0x00 0xf00000>; - no-map; - }; - - main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa2000000 0x00 0x100000>; - no-map; - }; - - main_r5fss0_core0_memory_region: r5f-memory@a2100000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa2100000 0x00 0xf00000>; - no-map; - }; - - main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa3000000 0x00 0x100000>; - no-map; - }; - - main_r5fss0_core1_memory_region: r5f-memory@a3100000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa3100000 0x00 0xf00000>; - no-map; - }; - - main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa4000000 0x00 0x100000>; - no-map; - }; - - main_r5fss1_core0_memory_region: r5f-memory@a4100000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa4100000 0x00 0xf00000>; - no-map; - }; - - main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa5000000 0x00 0x100000>; - no-map; - }; - - main_r5fss1_core1_memory_region: r5f-memory@a5100000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa5100000 0x00 0xf00000>; - no-map; - }; - - c66_1_dma_memory_region: c66-dma-memory@a6000000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa6000000 0x00 0x100000>; - no-map; - }; - - c66_0_memory_region: c66-memory@a6100000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa6100000 0x00 0xf00000>; - no-map; - }; - - c66_0_dma_memory_region: c66-dma-memory@a7000000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa7000000 0x00 0x100000>; - no-map; - }; - - c66_1_memory_region: c66-memory@a7100000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa7100000 0x00 0xf00000>; - no-map; - }; - - c71_0_dma_memory_region: c71-dma-memory@a8000000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa8000000 0x00 0x100000>; - no-map; - }; - - c71_0_memory_region: c71-memory@a8100000 { - compatible = "shared-dma-pool"; - reg = <0x00 0xa8100000 0x00 0xf00000>; - no-map; - }; - - rtos_ipc_memory_region: ipc-memories@aa000000 { - reg = <0x00 0xaa000000 0x00 0x01c00000>; - alignment = <0x1000>; - no-map; - }; - }; - - gpio_keys: gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&sw_pwr_pins_default>; - - button-1 { - label = "BOOT"; - linux,code = <BTN_0>; - gpios = <&wkup_gpio0 0 GPIO_ACTIVE_LOW>; - }; - - button-2 { - label = "POWER"; - linux,code = <KEY_POWER>; - gpios = <&wkup_gpio0 4 GPIO_ACTIVE_LOW>; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_default>; - - led-0 { - gpios = <&main_gpio0 96 GPIO_ACTIVE_HIGH>; - function = LED_FUNCTION_HEARTBEAT; - linux,default-trigger = "heartbeat"; - }; - - led-1 { - gpios = <&main_gpio0 95 GPIO_ACTIVE_HIGH>; - function = LED_FUNCTION_DISK_ACTIVITY; - linux,default-trigger = "mmc0"; - }; - - led-2 { - gpios = <&main_gpio0 97 GPIO_ACTIVE_HIGH>; - function = LED_FUNCTION_CPU; - linux,default-trigger = "cpu"; - }; - - led-3 { - gpios = <&main_gpio0 110 GPIO_ACTIVE_HIGH>; - function = LED_FUNCTION_DISK_ACTIVITY; - linux,default-trigger = "mmc1"; - }; - - led-4 { - gpios = <&main_gpio0 109 GPIO_ACTIVE_HIGH>; - function = LED_FUNCTION_WLAN; - default-state = "off"; - }; - }; - - evm_12v0: regulator-0 { - /* main supply */ - compatible = "regulator-fixed"; - regulator-name = "evm_12v0"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - regulator-always-on; - regulator-boot-on; - }; - - vsys_3v3: regulator-1 { - /* Output of LMS140 */ - compatible = "regulator-fixed"; - regulator-name = "vsys_3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&evm_12v0>; - regulator-always-on; - regulator-boot-on; - }; - - vsys_5v0: regulator-2 { - /* Output of LM5140 */ - compatible = "regulator-fixed"; - regulator-name = "vsys_5v0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&evm_12v0>; - regulator-always-on; - regulator-boot-on; - }; - - vdd_mmc1: regulator-3 { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&sd_pwr_en_pins_default>; - regulator-name = "vdd_mmc1"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - enable-active-high; - vin-supply = <&vsys_3v3>; - gpio = <&main_gpio0 82 GPIO_ACTIVE_HIGH>; - }; - - vdd_sd_dv_alt: regulator-4 { - compatible = "regulator-gpio"; - pinctrl-names = "default"; - pinctrl-0 = <&vdd_sd_dv_alt_pins_default>; - regulator-name = "tlv71033"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - vin-supply = <&vsys_5v0>; - gpios = <&main_gpio0 117 GPIO_ACTIVE_HIGH>; - states = <1800000 0x0>, - <3300000 0x1>; - }; - - dp_pwr_3v3: regulator-5 { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&dp0_3v3_en_pins_default>; - regulator-name = "dp-pwr"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&main_gpio0 49 GPIO_ACTIVE_HIGH>; /* DP0_PWR_SW_EN */ - enable-active-high; - }; - - dp0: connector { - compatible = "dp-connector"; - label = "DP0"; - type = "full-size"; - dp-pwr-supply = <&dp_pwr_3v3>; - - port { - dp_connector_in: endpoint { - remote-endpoint = <&dp0_out>; - }; - }; - }; -}; - -&main_pmx0 { - led_pins_default: led-default-pins { - pinctrl-single,pins = < - J721E_IOPAD(0x184, PIN_INPUT, 7) /* (T23) RGMII5_RD0.GPIO0_96 */ - J721E_IOPAD(0x180, PIN_INPUT, 7) /* (R23) RGMII5_RD1.GPIO0_95 */ - J721E_IOPAD(0x188, PIN_INPUT, 7) /* (Y28) RGMII6_TX_CTL.GPIO0_97 */ - J721E_IOPAD(0x1bc, PIN_INPUT, 7) /* (V24) MDIO0_MDC.GPIO0_110 */ - J721E_IOPAD(0x1b8, PIN_INPUT, 7) /* (V26) MDIO0_MDIO.GPIO0_109 */ - >; - }; - - main_mmc1_pins_default: main-mmc1-default-pins { - pinctrl-single,pins = < - J721E_IOPAD(0x254, PIN_INPUT, 0) /* (R29) MMC1_CMD */ - J721E_IOPAD(0x250, PIN_INPUT, 0) /* (P25) MMC1_CLK */ - J721E_IOPAD(0x2ac, PIN_INPUT, 0) /* (P25) MMC1_CLKLB */ - J721E_IOPAD(0x24c, PIN_INPUT, 0) /* (R24) MMC1_DAT0 */ - J721E_IOPAD(0x248, PIN_INPUT, 0) /* (P24) MMC1_DAT1 */ - J721E_IOPAD(0x244, PIN_INPUT, 0) /* (R25) MMC1_DAT2 */ - J721E_IOPAD(0x240, PIN_INPUT, 0) /* (R26) MMC1_DAT3 */ - J721E_IOPAD(0x258, PIN_INPUT, 0) /* (P23) MMC1_SDCD */ - >; - }; - - main_uart0_pins_default: main-uart0-default-pins { - pinctrl-single,pins = < - J721E_IOPAD(0x1e8, PIN_INPUT, 0) /* (AB2) UART0_RXD */ - J721E_IOPAD(0x1ec, PIN_OUTPUT, 0) /* (AB3) UART0_TXD */ - >; - }; - - sd_pwr_en_pins_default: sd-pwr-en-default-pins { - pinctrl-single,pins = < - J721E_IOPAD(0x14c, PIN_INPUT, 7) /* (AA29) PRG0_PRU1_GPO19.GPIO0_82 */ - >; - }; - - vdd_sd_dv_alt_pins_default: vdd-sd-dv-alt-default-pins { - pinctrl-single,pins = < - J721E_IOPAD(0x1d8, PIN_INPUT, 7) /* (W4) SPI1_CS1.GPIO0_117 */ - >; - }; - - main_usbss0_pins_default: main-usbss0-default-pins { - pinctrl-single,pins = < - J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3) MCAN1_RX.GPIO1_3 - USBC_DIR */ - >; - }; - - main_usbss1_pins_default: main-usbss1-default-pins { - pinctrl-single,pins = < - J721E_IOPAD(0x290, INPUT_DISABLE, 1) /* (U6) USB0_DRVVBUS.USB1_DRVVBUS */ - >; - }; - - dp0_3v3_en_pins_default:dp0-3v3-en-default-pins { - pinctrl-single,pins = < - J721E_IOPAD(0xc8, PIN_INPUT, 7) /* (AE26) PRG0_PRU0_GPO6.GPIO0_49 */ - >; - }; - - dp0_pins_default: dp0-default-pins { - pinctrl-single,pins = < - J721E_IOPAD(0x1c4, PIN_INPUT, 5) /* (Y4) SPI0_CS1.DP0_HPD */ - >; - }; - - main_i2c0_pins_default: main-i2c0-default-pins { - pinctrl-single,pins = < - J721E_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (AC5) I2C0_SCL */ - J721E_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (AA5) I2C0_SDA */ - >; - }; - - main_i2c1_pins_default: main-i2c1-default-pins { - pinctrl-single,pins = < - J721E_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (Y6) I2C1_SCL */ - J721E_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (AA6) I2C1_SDA */ - >; - }; - - main_i2c2_pins_default: main-i2c2-default-pins { - pinctrl-single,pins = < - J721E_IOPAD(0x208, PIN_INPUT_PULLUP, 4) /* (W5) MCAN0_RX.I2C2_SCL */ - J721E_IOPAD(0x20c, PIN_INPUT_PULLUP, 4) /* (W6) MCAN0_TX.I2C2_SDA */ - J721E_IOPAD(0x138, PIN_INPUT, 7) /* (AE25) PRG0_PRU1_GPO14.GPIO0_77 */ - J721E_IOPAD(0x13c, PIN_INPUT, 7) /* (AF29) PRG0_PRU1_GPO15.GPIO0_78 */ - >; - }; - - main_i2c3_pins_default: main-i2c3-default-pins { - pinctrl-single,pins = < - J721E_IOPAD(0x270, PIN_INPUT_PULLUP, 4) /* (T26) MMC2_CLK.I2C3_SCL */ - J721E_IOPAD(0x274, PIN_INPUT_PULLUP, 4) /* (T25) MMC2_CMD.I2C3_SDA */ - >; - }; - - main_i2c4_pins_default: main-i2c4-default-pins { - pinctrl-single,pins = < - J721E_IOPAD(0x1e0, PIN_INPUT_PULLUP, 2) /* (Y5) SPI1_D0.I2C4_SCL */ - J721E_IOPAD(0x1dc, PIN_INPUT_PULLUP, 2) /* (Y1) SPI1_CLK.I2C4_SDA */ - J721E_IOPAD(0x30, PIN_INPUT, 7) /* (AF24) PRG1_PRU0_GPO11.GPIO0_12 */ - J721E_IOPAD(0x34, PIN_INPUT, 7) /* (AJ24) PRG1_PRU0_GPO12.GPIO0_13 */ - >; - }; - - main_i2c5_pins_default: main-i2c5-default-pins { - pinctrl-single,pins = < - J721E_IOPAD(0x150, PIN_INPUT_PULLUP, 2) /* (Y26) PRG0_MDIO0_MDIO.I2C5_SCL */ - J721E_IOPAD(0x154, PIN_INPUT_PULLUP, 2) /* (AA27) PRG0_MDIO0_MDC.I2C5_SDA */ - >; - }; - - main_i2c6_pins_default: main-i2c6-default-pins { - pinctrl-single,pins = < - J721E_IOPAD(0x1d0, PIN_INPUT_PULLUP, 2) /* (AA3) SPI0_D1.I2C6_SCL */ - J721E_IOPAD(0x1e4, PIN_INPUT_PULLUP, 2) /* (Y2) SPI1_D1.I2C6_SDA */ - J721E_IOPAD(0x74, PIN_INPUT, 7) /* (AC21) PRG1_PRU1_GPO7.GPIO0_28 */ - J721E_IOPAD(0xa4, PIN_INPUT, 7) /* (AH22) PRG1_PRU1_GPO19.GPIO0_40 */ - >; - }; - - csi0_gpio_pins_default: csi0-gpio-default-pins { - pinctrl-single,pins = < - J721E_IOPAD(0x19c, PIN_INPUT_PULLDOWN, 7) /* (W27) RGMII6_TD0.GPIO0_102 */ - J721E_IOPAD(0x1a0, PIN_INPUT_PULLDOWN, 7) /* (W29) RGMII6_TXC.GPIO0_103 */ - >; - }; - - csi1_gpio_pins_default: csi1-gpio-default-pins { - pinctrl-single,pins = < - J721E_IOPAD(0x198, PIN_INPUT_PULLDOWN, 7) /* (V25) RGMII6_TD1.GPIO0_101 */ - J721E_IOPAD(0x1b0, PIN_INPUT_PULLDOWN, 7) /* (W24) RGMII6_RD1.GPIO0_107 */ - >; - }; - - pcie1_rst_pins_default: pcie1-rst-default-pins { - pinctrl-single,pins = < - J721E_IOPAD(0x5c, PIN_INPUT, 7) /* (AG23) PRG1_PRU1_GPO1.GPIO0_22 */ - >; - }; -}; - -&wkup_pmx0 { - eeprom_wp_pins_default: eeprom-wp-default-pins { - pinctrl-single,pins = < - J721E_WKUP_IOPAD(0xc4, PIN_OUTPUT_PULLUP, 7) /* (G24) WKUP_GPIO0_5 */ - >; - }; - - mcu_adc0_pins_default: mcu-adc0-default-pins { - pinctrl-single,pins = < - J721E_WKUP_IOPAD(0x130, PIN_INPUT, 0) /* (K25) MCU_ADC0_AIN0 */ - J721E_WKUP_IOPAD(0x134, PIN_INPUT, 0) /* (K26) MCU_ADC0_AIN1 */ - J721E_WKUP_IOPAD(0x138, PIN_INPUT, 0) /* (K28) MCU_ADC0_AIN2 */ - J721E_WKUP_IOPAD(0x13c, PIN_INPUT, 0) /* (L28) MCU_ADC0_AIN3 */ - J721E_WKUP_IOPAD(0x140, PIN_INPUT, 0) /* (K24) MCU_ADC0_AIN4 */ - J721E_WKUP_IOPAD(0x144, PIN_INPUT, 0) /* (K27) MCU_ADC0_AIN5 */ - J721E_WKUP_IOPAD(0x148, PIN_INPUT, 0) /* (K29) MCU_ADC0_AIN6 */ - >; - }; - - mcu_adc1_pins_default: mcu-adc1-default-pins { - pinctrl-single,pins = < - J721E_WKUP_IOPAD(0x150, PIN_INPUT, 0) /* (N23) MCU_ADC1_AIN0 */ - >; - }; - - mikro_bus_pins_default: mikro-bus-default-pins { - pinctrl-single,pins = < - J721E_WKUP_IOPAD(0x108, PIN_INPUT, 7) /* SDAPULLEN (E26) PMIC_POWER_EN0.WKUP_GPIO0_66 */ - J721E_WKUP_IOPAD(0xd4, PIN_INPUT, 7) /* SDA (G26) WKUP_GPIO0_9.MCU_I2C1_SDA */ - J721E_WKUP_IOPAD(0xf4, PIN_INPUT, 7) /* SDA (D25) MCU_I3C0_SDA.WKUP_GPIO0_61 */ - J721E_WKUP_IOPAD(0xd0, PIN_INPUT, 7) /* SCL (G27) WKUP_GPIO0_8.MCU_I2C1_SCL */ - J721E_WKUP_IOPAD(0xf0, PIN_INPUT, 7) /* SCL (D26) MCU_I3C0_SCL.WKUP_GPIO0_60 */ - - J721E_WKUP_IOPAD(0xb8, PIN_INPUT, 7) /* MOSI (F28) WKUP_GPIO0_2.MCU_SPI1_D1 */ - J721E_WKUP_IOPAD(0xb4, PIN_INPUT, 7) /* MISO (F25) WKUP_GPIO0_1.MCU_SPI1_D0 */ - J721E_WKUP_IOPAD(0xb0, PIN_INPUT, 7) /* CLK (F26) WKUP_GPIO0_0.MCU_SPI1_CLK */ - J721E_WKUP_IOPAD(0xbc, PIN_INPUT, 7) /* CS (F27) WKUP_GPIO0_3.MCU_SPI1_CS0 */ - - J721E_WKUP_IOPAD(0x44, PIN_INPUT, 7) /* RX (G22) MCU_OSPI1_D1.WKUP_GPIO0_33 */ - J721E_WKUP_IOPAD(0x48, PIN_INPUT, 7) /* TX (D23) MCU_OSPI1_D2.WKUP_GPIO0_34 */ - - J721E_WKUP_IOPAD(0x4c, PIN_INPUT, 7) /* INT (C23) MCU_OSPI1_D3.WKUP_GPIO0_35 */ - J721E_WKUP_IOPAD(0x54, PIN_INPUT, 7) /* RST (E22) MCU_OSPI1_CSn1.WKUP_GPIO0_37 */ - J721E_WKUP_IOPAD(0xdc, PIN_INPUT, 7) /* PWM (H27) WKUP_GPIO0_11 */ - J721E_WKUP_IOPAD(0xac, PIN_INPUT, 7) /* AN (C29) MCU_MCAN0_RX.WKUP_GPIO0_59 */ - >; - }; - - mcu_cpsw_pins_default: mcu-cpsw-default-pins { - pinctrl-single,pins = < - J721E_WKUP_IOPAD(0x84, PIN_INPUT, 0) /* (B24) MCU_RGMII1_RD0 */ - J721E_WKUP_IOPAD(0x80, PIN_INPUT, 0) /* (A24) MCU_RGMII1_RD1 */ - J721E_WKUP_IOPAD(0x7c, PIN_INPUT, 0) /* (D24) MCU_RGMII1_RD2 */ - J721E_WKUP_IOPAD(0x78, PIN_INPUT, 0) /* (A25) MCU_RGMII1_RD3 */ - J721E_WKUP_IOPAD(0x74, PIN_INPUT, 0) /* (C24) MCU_RGMII1_RXC */ - J721E_WKUP_IOPAD(0x5c, PIN_INPUT, 0) /* (C25) MCU_RGMII1_RX_CTL */ - J721E_WKUP_IOPAD(0x6c, PIN_OUTPUT, 0) /* (B25) MCU_RGMII1_TD0 */ - J721E_WKUP_IOPAD(0x68, PIN_OUTPUT, 0) /* (A26) MCU_RGMII1_TD1 */ - J721E_WKUP_IOPAD(0x64, PIN_OUTPUT, 0) /* (A27) MCU_RGMII1_TD2 */ - J721E_WKUP_IOPAD(0x60, PIN_OUTPUT, 0) /* (A28) MCU_RGMII1_TD3 */ - J721E_WKUP_IOPAD(0x70, PIN_OUTPUT, 0) /* (B26) MCU_RGMII1_TXC */ - J721E_WKUP_IOPAD(0x58, PIN_OUTPUT, 0) /* (B27) MCU_RGMII1_TX_CTL */ - >; - }; - - mcu_mdio_pins_default: mcu-mdio1-default-pins { - pinctrl-single,pins = < - J721E_WKUP_IOPAD(0x8c, PIN_OUTPUT, 0) /* (F23) MCU_MDIO0_MDC */ - J721E_WKUP_IOPAD(0x88, PIN_INPUT, 0) /* (E23) MCU_MDIO0_MDIO */ - >; - }; - - sw_pwr_pins_default: sw-pwr-default-pins { - pinctrl-single,pins = < - J721E_WKUP_IOPAD(0xc0, PIN_INPUT, 7) /* (G25) WKUP_GPIO0_4 */ - >; - }; - - wkup_i2c0_pins_default: wkup-i2c0-default-pins { - pinctrl-single,pins = < - J721E_WKUP_IOPAD(0xf8, PIN_INPUT_PULLUP, 0) /* (J25) WKUP_I2C0_SCL */ - J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */ - >; - }; - - wkup_uart0_pins_default: wkup-uart0-default-pins { - pinctrl-single,pins = < - J721E_WKUP_IOPAD(0xa0, PIN_INPUT, 0) /* (J29) WKUP_UART0_RXD */ - J721E_WKUP_IOPAD(0xa4, PIN_OUTPUT, 0) /* (J28) WKUP_UART0_TXD */ - >; - }; - - mcu_usbss1_pins_default: mcu-usbss1-default-pins { - pinctrl-single,pins = < - J721E_WKUP_IOPAD(0x3c, PIN_OUTPUT_PULLUP, 5) /* (A23) MCU_OSPI1_LBCLKO.WKUP_GPIO0_30 */ - >; - }; -}; - -&wkup_uart0 { - /* Wakeup UART is used by TIFS firmware. */ - status = "reserved"; - pinctrl-names = "default"; - pinctrl-0 = <&wkup_uart0_pins_default>; -}; - -&main_uart0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&main_uart0_pins_default>; - /* Shared with ATF on this platform */ - power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>; -}; - -&main_sdhci0 { - /* eMMC */ - status = "okay"; - non-removable; - ti,driver-strength-ohm = <50>; - disable-wp; -}; - -&main_sdhci1 { - /* SD Card */ - status = "okay"; - vmmc-supply = <&vdd_mmc1>; - vqmmc-supply = <&vdd_sd_dv_alt>; - pinctrl-names = "default"; - pinctrl-0 = <&main_mmc1_pins_default>; - ti,driver-strength-ohm = <50>; - disable-wp; -}; - -&main_i2c0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&main_i2c0_pins_default>; - clock-frequency = <400000>; -}; - -&main_i2c1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&main_i2c1_pins_default>; - clock-frequency = <400000>; -}; - -&main_i2c2 { - /* BBB Header: P9.19 and P9.20 */ - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&main_i2c2_pins_default>; - clock-frequency = <100000>; -}; - -&main_i2c3 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&main_i2c3_pins_default>; - clock-frequency = <400000>; -}; - -&main_i2c4 { - /* BBB Header: P9.24 and P9.26 */ - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&main_i2c4_pins_default>; - clock-frequency = <100000>; -}; - -&main_i2c5 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&main_i2c5_pins_default>; - clock-frequency = <400000>; -}; - -&main_i2c6 { - /* BBB Header: P9.17 and P9.18 */ - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&main_i2c6_pins_default>; - clock-frequency = <100000>; - status = "okay"; -}; - -&wkup_i2c0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&wkup_i2c0_pins_default>; - clock-frequency = <400000>; - - eeprom@50 { - compatible = "atmel,24c04"; - reg = <0x50>; - pinctrl-names = "default"; - pinctrl-0 = <&eeprom_wp_pins_default>; - }; -}; - -&wkup_gpio0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&mcu_adc0_pins_default>, <&mcu_adc1_pins_default>, - <&mikro_bus_pins_default>; -}; - -&main_gpio0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&csi1_gpio_pins_default>, <&csi0_gpio_pins_default>; -}; - -&main_gpio1 { - status = "okay"; -}; - -&usb_serdes_mux { - idle-states = <1>, <1>; /* USB0 to SERDES3, USB1 to SERDES2 */ -}; - -&serdes_ln_ctrl { - idle-states = <J721E_SERDES0_LANE0_IP4_UNUSED>, <J721E_SERDES0_LANE1_IP4_UNUSED>, - <J721E_SERDES1_LANE0_PCIE1_LANE0>, <J721E_SERDES1_LANE1_PCIE1_LANE1>, - <J721E_SERDES2_LANE0_IP1_UNUSED>, <J721E_SERDES2_LANE1_USB3_1>, - <J721E_SERDES3_LANE0_USB3_0_SWAP>, <J721E_SERDES3_LANE1_USB3_0>, - <J721E_SERDES4_LANE0_EDP_LANE0>, <J721E_SERDES4_LANE1_EDP_LANE1>, - <J721E_SERDES4_LANE2_EDP_LANE2>, <J721E_SERDES4_LANE3_EDP_LANE3>; -}; - -&serdes_wiz3 { - typec-dir-gpios = <&main_gpio1 3 GPIO_ACTIVE_LOW>; - typec-dir-debounce-ms = <700>; /* TUSB321, tCCB_DEFAULT 133 ms */ -}; - -&serdes3 { - serdes3_usb_link: phy@0 { - reg = <0>; - cdns,num-lanes = <2>; - #phy-cells = <0>; - cdns,phy-type = <PHY_TYPE_USB3>; - resets = <&serdes_wiz3 1>, <&serdes_wiz3 2>; - }; -}; - -&serdes4 { - torrent_phy_dp: phy@0 { - reg = <0>; - resets = <&serdes_wiz4 1>; - cdns,phy-type = <PHY_TYPE_DP>; - cdns,num-lanes = <4>; - cdns,max-bit-rate = <5400>; - #phy-cells = <0>; - }; -}; - -&mhdp { - phys = <&torrent_phy_dp>; - phy-names = "dpphy"; - pinctrl-names = "default"; - pinctrl-0 = <&dp0_pins_default>; -}; - -&usbss0 { - pinctrl-names = "default"; - pinctrl-0 = <&main_usbss0_pins_default>; - ti,vbus-divider; -}; - -&usb0 { - dr_mode = "peripheral"; - maximum-speed = "super-speed"; - phys = <&serdes3_usb_link>; - phy-names = "cdns3,usb3-phy"; -}; - -&serdes2 { - serdes2_usb_link: phy@1 { - reg = <1>; - cdns,num-lanes = <1>; - #phy-cells = <0>; - cdns,phy-type = <PHY_TYPE_USB3>; - resets = <&serdes_wiz2 2>; - }; -}; - -&usbss1 { - pinctrl-names = "default"; - pinctrl-0 = <&main_usbss1_pins_default>, <&mcu_usbss1_pins_default>; - ti,vbus-divider; -}; - -&usb1 { - dr_mode = "host"; - maximum-speed = "super-speed"; - phys = <&serdes2_usb_link>; - phy-names = "cdns3,usb3-phy"; -}; - -&tscadc0 { - status = "okay"; - /* BBB Header: P9.39, P9.40, P9.37, P9.38, P9.33, P9.36, P9.35 */ - adc { - ti,adc-channels = <0 1 2 3 4 5 6>; - }; -}; - -&tscadc1 { - status = "okay"; - /* MCU mikroBUS Header J10.1 - MCU_ADC1_AIN0 */ - adc { - ti,adc-channels = <0>; - }; -}; - -&mcu_cpsw { - pinctrl-names = "default"; - pinctrl-0 = <&mcu_cpsw_pins_default>; -}; - -&davinci_mdio { - pinctrl-names = "default"; - pinctrl-0 = <&mcu_mdio_pins_default>; - - phy0: ethernet-phy@0 { - reg = <0>; - ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; - ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; - }; -}; - -&cpsw_port1 { - phy-mode = "rgmii-rxid"; - phy-handle = <&phy0>; -}; - -&dss { - /* - * These clock assignments are chosen to enable the following outputs: - * - * VP0 - DisplayPort SST - * VP1 - DPI0 - * VP2 - DSI - * VP3 - DPI1 - */ - - assigned-clocks = <&k3_clks 152 1>, /* VP 1 pixel clock */ - <&k3_clks 152 4>, /* VP 2 pixel clock */ - <&k3_clks 152 9>, /* VP 3 pixel clock */ - <&k3_clks 152 13>; /* VP 4 pixel clock */ - assigned-clock-parents = <&k3_clks 152 2>, /* PLL16_HSDIV0 */ - <&k3_clks 152 6>, /* PLL19_HSDIV0 */ - <&k3_clks 152 11>, /* PLL18_HSDIV0 */ - <&k3_clks 152 18>; /* PLL23_HSDIV0 */ -}; - -&dss_ports { - port { - dpi0_out: endpoint { - remote-endpoint = <&dp0_in>; - }; - }; -}; - -&dp0_ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - dp0_in: endpoint { - remote-endpoint = <&dpi0_out>; - }; - }; - - port@4 { - reg = <4>; - dp0_out: endpoint { - remote-endpoint = <&dp_connector_in>; - }; - }; -}; - -&serdes0 { - serdes0_pcie_link: phy@0 { - reg = <0>; - cdns,num-lanes = <1>; - #phy-cells = <0>; - cdns,phy-type = <PHY_TYPE_PCIE>; - resets = <&serdes_wiz0 1>; - }; -}; - -&serdes1 { - serdes1_pcie_link: phy@0 { - reg = <0>; - cdns,num-lanes = <2>; - #phy-cells = <0>; - cdns,phy-type = <PHY_TYPE_PCIE>; - resets = <&serdes_wiz1 1>, <&serdes_wiz1 2>; - }; -}; - -&pcie1_rc { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pcie1_rst_pins_default>; - phys = <&serdes1_pcie_link>; - phy-names = "pcie-phy"; - num-lanes = <2>; - max-link-speed = <3>; - reset-gpios = <&main_gpio0 22 GPIO_ACTIVE_HIGH>; -}; - -&ufs_wrapper { - status = "disabled"; -}; - -&mailbox0_cluster0 { - status = "okay"; - interrupts = <436>; - - mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 { - ti,mbox-rx = <0 0 0>; - ti,mbox-tx = <1 0 0>; - }; - - mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 { - ti,mbox-rx = <2 0 0>; - ti,mbox-tx = <3 0 0>; - }; -}; - -&mailbox0_cluster1 { - status = "okay"; - interrupts = <432>; - - mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 { - ti,mbox-rx = <0 0 0>; - ti,mbox-tx = <1 0 0>; - }; - - mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 { - ti,mbox-rx = <2 0 0>; - ti,mbox-tx = <3 0 0>; - }; -}; - -&mailbox0_cluster2 { - status = "okay"; - interrupts = <428>; - - mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 { - ti,mbox-rx = <0 0 0>; - ti,mbox-tx = <1 0 0>; - }; - - mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 { - ti,mbox-rx = <2 0 0>; - ti,mbox-tx = <3 0 0>; - }; -}; - -&mailbox0_cluster3 { - status = "okay"; - interrupts = <424>; - - mbox_c66_0: mbox-c66-0 { - ti,mbox-rx = <0 0 0>; - ti,mbox-tx = <1 0 0>; - }; - - mbox_c66_1: mbox-c66-1 { - ti,mbox-rx = <2 0 0>; - ti,mbox-tx = <3 0 0>; - }; -}; - -&mailbox0_cluster4 { - status = "okay"; - interrupts = <420>; - - mbox_c71_0: mbox-c71-0 { - ti,mbox-rx = <0 0 0>; - ti,mbox-tx = <1 0 0>; - }; -}; - -&mcu_r5fss0_core0 { - mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>; - memory-region = <&mcu_r5fss0_core0_dma_memory_region>, - <&mcu_r5fss0_core0_memory_region>; -}; - -&mcu_r5fss0_core1 { - mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core1>; - memory-region = <&mcu_r5fss0_core1_dma_memory_region>, - <&mcu_r5fss0_core1_memory_region>; -}; - -&main_r5fss0_core0 { - mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core0>; - memory-region = <&main_r5fss0_core0_dma_memory_region>, - <&main_r5fss0_core0_memory_region>; -}; - -&main_r5fss0_core1 { - mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core1>; - memory-region = <&main_r5fss0_core1_dma_memory_region>, - <&main_r5fss0_core1_memory_region>; -}; - -&main_r5fss1_core0 { - mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core0>; - memory-region = <&main_r5fss1_core0_dma_memory_region>, - <&main_r5fss1_core0_memory_region>; -}; - -&main_r5fss1_core1 { - mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core1>; - memory-region = <&main_r5fss1_core1_dma_memory_region>, - <&main_r5fss1_core1_memory_region>; -}; - -&c66_0 { - status = "okay"; - mboxes = <&mailbox0_cluster3>, <&mbox_c66_0>; - memory-region = <&c66_0_dma_memory_region>, - <&c66_0_memory_region>; -}; - -&c66_1 { - status = "okay"; - mboxes = <&mailbox0_cluster3>, <&mbox_c66_1>; - memory-region = <&c66_1_dma_memory_region>, - <&c66_1_memory_region>; -}; - -&c71_0 { - status = "okay"; - mboxes = <&mailbox0_cluster4>, <&mbox_c71_0>; - memory-region = <&c71_0_dma_memory_region>, - <&c71_0_memory_region>; -}; diff --git a/arch/arm/dts/k3-j721e-r5-common-proc-board.dts b/arch/arm/dts/k3-j721e-r5-common-proc-board.dts index ce55ea6bae0..c775432505b 100644 --- a/arch/arm/dts/k3-j721e-r5-common-proc-board.dts +++ b/arch/arm/dts/k3-j721e-r5-common-proc-board.dts @@ -51,6 +51,13 @@ bootph-pre-ram; }; +&hbmc { + reg = <0x0 0x47040000 0x0 0x100>, + <0x0 0x50000000 0x0 0x8000000>; + ranges = <0x0 0x0 0x0 0x50000000 0x4000000>, + <0x1 0x0 0x0 0x54000000 0x800000>; +}; + &ospi0 { /* Address change for data region (32-bit) */ reg = <0x0 0x47040000 0x0 0x100>, diff --git a/arch/arm/dts/k3-j721e-r5.dtsi b/arch/arm/dts/k3-j721e-r5.dtsi index 688a6cf4089..786a41c5e90 100644 --- a/arch/arm/dts/k3-j721e-r5.dtsi +++ b/arch/arm/dts/k3-j721e-r5.dtsi @@ -42,7 +42,11 @@ }; &mcu_timer0 { - status = "okay"; + /delete-property/ clocks; + /delete-property/ clocks-names; + /delete-property/ assigned-clocks; + /delete-property/ assigned-clock-parents; + clock-frequency = <166666666>; bootph-pre-ram; }; diff --git a/arch/arm/dts/k3-j721s2-r5-common-proc-board.dts b/arch/arm/dts/k3-j721s2-r5-common-proc-board.dts index 506ad9b7910..09afdf3954a 100644 --- a/arch/arm/dts/k3-j721s2-r5-common-proc-board.dts +++ b/arch/arm/dts/k3-j721s2-r5-common-proc-board.dts @@ -13,6 +13,10 @@ &tps659411 { bootph-pre-ram; + esm: esm { + compatible = "ti,tps659413-esm"; + bootph-pre-ram; + }; }; &wkup_vtm0 { diff --git a/arch/arm/dts/k3-j721s2-r5.dtsi b/arch/arm/dts/k3-j721s2-r5.dtsi index 634676c8491..a820f516015 100644 --- a/arch/arm/dts/k3-j721s2-r5.dtsi +++ b/arch/arm/dts/k3-j721s2-r5.dtsi @@ -43,6 +43,10 @@ }; &mcu_timer0 { + /delete-property/ clocks; + /delete-property/ clocks-names; + /delete-property/ assigned-clocks; + /delete-property/ assigned-clock-parents; clock-frequency = <250000000>; bootph-pre-ram; }; diff --git a/arch/arm/dts/k3-j722s-evm-u-boot.dtsi b/arch/arm/dts/k3-j722s-evm-u-boot.dtsi index 88c4a72db61..6ae76beea3e 100644 --- a/arch/arm/dts/k3-j722s-evm-u-boot.dtsi +++ b/arch/arm/dts/k3-j722s-evm-u-boot.dtsi @@ -16,3 +16,7 @@ &dmsc { bootph-pre-ram; }; + +&main_bcdma { + bootph-pre-ram; +}; diff --git a/arch/arm/dts/k3-j722s-r5-evm.dts b/arch/arm/dts/k3-j722s-r5-evm.dts index 5e5c2e3111e..286ab50d3da 100644 --- a/arch/arm/dts/k3-j722s-r5-evm.dts +++ b/arch/arm/dts/k3-j722s-r5-evm.dts @@ -41,8 +41,8 @@ ti,host-id = <36>; ti,secure-host; mbox-names = "rx", "tx"; - mboxes= <&secure_proxy_main 22>, - <&secure_proxy_main 23>; + mboxes= <&secure_proxy_main 28>, + <&secure_proxy_main 29>; bootph-all; }; }; @@ -77,7 +77,28 @@ }; }; +&main_timer0 { + /delete-property/ clocks; + /delete-property/ clocks-names; + /delete-property/ assigned-clocks; + /delete-property/ assigned-clock-parents; + clock-frequency = <25000000>; +}; + /* WKUP UART0 is used for DM firmware logs */ &wkup_uart0 { status = "okay"; }; + +&ospi0 { + reg = <0x00 0x0fc40000 0x00 0x100>, + <0x00 0x60000000 0x00 0x08000000>; +}; + +&main_bcdma { + ti,sci = <&dm_tifs>; +}; + +&main_pktdma { + ti,sci = <&dm_tifs>; +}; diff --git a/arch/arm/dts/k3-j784s4-r5.dtsi b/arch/arm/dts/k3-j784s4-r5.dtsi index 0cd0ccc2dea..a1394115b8b 100644 --- a/arch/arm/dts/k3-j784s4-r5.dtsi +++ b/arch/arm/dts/k3-j784s4-r5.dtsi @@ -41,7 +41,10 @@ }; &mcu_timer0 { - status = "okay"; + /delete-property/ clocks; + /delete-property/ clocks-names; + /delete-property/ assigned-clocks; + /delete-property/ assigned-clock-parents; clock-frequency = <250000000>; bootph-pre-ram; }; @@ -104,3 +107,9 @@ &mcu_udmap { ti,sci = <&dm_tifs>; }; + +&wkup_vtm0 { + bootph-pre-ram; + vdd-supply-2 = <&tps62873a>; +}; + diff --git a/arch/arm/dts/meson-a1.dtsi b/arch/arm/dts/meson-a1.dtsi deleted file mode 100644 index 648e7f49424..00000000000 --- a/arch/arm/dts/meson-a1.dtsi +++ /dev/null @@ -1,518 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 Amlogic, Inc. All rights reserved. - */ - -#include <dt-bindings/clock/amlogic,a1-pll-clkc.h> -#include <dt-bindings/clock/amlogic,a1-peripherals-clkc.h> -#include <dt-bindings/gpio/meson-a1-gpio.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/power/meson-a1-power.h> -#include <dt-bindings/reset/amlogic,meson-a1-reset.h> - -/ { - compatible = "amlogic,a1"; - - interrupt-parent = <&gic>; - #address-cells = <2>; - #size-cells = <2>; - - cpus { - #address-cells = <2>; - #size-cells = <0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a35"; - reg = <0x0 0x0>; - enable-method = "psci"; - next-level-cache = <&l2>; - }; - - cpu1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a35"; - reg = <0x0 0x1>; - enable-method = "psci"; - next-level-cache = <&l2>; - }; - - l2: l2-cache0 { - compatible = "cache"; - cache-level = <2>; - cache-unified; - }; - }; - - efuse: efuse { - compatible = "amlogic,meson-gxbb-efuse"; - clocks = <&clkc_periphs CLKID_OTP>; - #address-cells = <1>; - #size-cells = <1>; - secure-monitor = <&sm>; - power-domains = <&pwrc PWRC_OTP_ID>; - }; - - psci { - compatible = "arm,psci-1.0"; - method = "smc"; - }; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - linux,cma { - compatible = "shared-dma-pool"; - reusable; - size = <0x0 0x800000>; - alignment = <0x0 0x400000>; - linux,cma-default; - }; - }; - - sm: secure-monitor { - compatible = "amlogic,meson-gxbb-sm"; - - pwrc: power-controller { - compatible = "amlogic,meson-a1-pwrc"; - #power-domain-cells = <1>; - }; - }; - - soc { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - spifc: spi@fd000400 { - compatible = "amlogic,a1-spifc"; - reg = <0x0 0xfd000400 0x0 0x290>; - clocks = <&clkc_periphs CLKID_SPIFC>; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&pwrc PWRC_SPIFC_ID>; - status = "disabled"; - }; - - apb: bus@fe000000 { - compatible = "simple-bus"; - reg = <0x0 0xfe000000 0x0 0x1000000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x1000000>; - - reset: reset-controller@0 { - compatible = "amlogic,meson-a1-reset"; - reg = <0x0 0x0 0x0 0x8c>; - #reset-cells = <1>; - }; - - periphs_pinctrl: pinctrl@400 { - compatible = "amlogic,meson-a1-periphs-pinctrl"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - gpio: bank@400 { - reg = <0x0 0x0400 0x0 0x003c>, - <0x0 0x0480 0x0 0x0118>; - reg-names = "mux", "gpio"; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&periphs_pinctrl 0 0 62>; - }; - - i2c0_f11_pins: i2c0-f11 { - mux { - groups = "i2c0_sck_f11", - "i2c0_sda_f12"; - function = "i2c0"; - bias-pull-up; - drive-strength-microamp = <3000>; - }; - }; - - i2c0_f9_pins: i2c0-f9 { - mux { - groups = "i2c0_sck_f9", - "i2c0_sda_f10"; - function = "i2c0"; - bias-pull-up; - drive-strength-microamp = <3000>; - }; - }; - - i2c1_x_pins: i2c1-x { - mux { - groups = "i2c1_sck_x", - "i2c1_sda_x"; - function = "i2c1"; - bias-pull-up; - drive-strength-microamp = <3000>; - }; - }; - - i2c1_a_pins: i2c1-a { - mux { - groups = "i2c1_sck_a", - "i2c1_sda_a"; - function = "i2c1"; - bias-pull-up; - drive-strength-microamp = <3000>; - }; - }; - - i2c2_x0_pins: i2c2-x0 { - mux { - groups = "i2c2_sck_x0", - "i2c2_sda_x1"; - function = "i2c2"; - bias-pull-up; - drive-strength-microamp = <3000>; - }; - }; - - i2c2_x15_pins: i2c2-x15 { - mux { - groups = "i2c2_sck_x15", - "i2c2_sda_x16"; - function = "i2c2"; - bias-pull-up; - drive-strength-microamp = <3000>; - }; - }; - - i2c2_a4_pins: i2c2-a4 { - mux { - groups = "i2c2_sck_a4", - "i2c2_sda_a5"; - function = "i2c2"; - bias-pull-up; - drive-strength-microamp = <3000>; - }; - }; - - i2c2_a8_pins: i2c2-a8 { - mux { - groups = "i2c2_sck_a8", - "i2c2_sda_a9"; - function = "i2c2"; - bias-pull-up; - drive-strength-microamp = <3000>; - }; - }; - - i2c3_x_pins: i2c3-x { - mux { - groups = "i2c3_sck_x", - "i2c3_sda_x"; - function = "i2c3"; - bias-pull-up; - drive-strength-microamp = <3000>; - }; - }; - - i2c3_f_pins: i2c3-f { - mux { - groups = "i2c3_sck_f", - "i2c3_sda_f"; - function = "i2c3"; - bias-pull-up; - drive-strength-microamp = <3000>; - }; - }; - - uart_a_pins: uart-a { - mux { - groups = "uart_a_tx", - "uart_a_rx"; - function = "uart_a"; - }; - }; - - uart_a_cts_rts_pins: uart-a-cts-rts { - mux { - groups = "uart_a_cts", - "uart_a_rts"; - function = "uart_a"; - bias-pull-down; - }; - }; - - sdio_pins: sdio { - mux0 { - groups = "sdcard_d0_x", - "sdcard_d1_x", - "sdcard_d2_x", - "sdcard_d3_x", - "sdcard_cmd_x"; - function = "sdcard"; - bias-pull-up; - }; - - mux1 { - groups = "sdcard_clk_x"; - function = "sdcard"; - bias-disable; - }; - }; - - sdio_clk_gate_pins: sdio-clk-gate { - mux { - groups = "sdcard_clk_x"; - function = "sdcard"; - bias-pull-down; - }; - }; - - spifc_pins: spifc { - mux { - groups = "spif_mo", - "spif_mi", - "spif_clk", - "spif_cs", - "spif_hold_n", - "spif_wp_n"; - function = "spif"; - }; - }; - }; - - gpio_intc: interrupt-controller@440 { - compatible = "amlogic,meson-a1-gpio-intc", - "amlogic,meson-gpio-intc"; - reg = <0x0 0x0440 0x0 0x14>; - interrupt-controller; - #interrupt-cells = <2>; - amlogic,channel-interrupts = - <49 50 51 52 53 54 55 56>; - }; - - clkc_periphs: clock-controller@800 { - compatible = "amlogic,a1-peripherals-clkc"; - reg = <0 0x800 0 0x104>; - #clock-cells = <1>; - clocks = <&clkc_pll CLKID_FCLK_DIV2>, - <&clkc_pll CLKID_FCLK_DIV3>, - <&clkc_pll CLKID_FCLK_DIV5>, - <&clkc_pll CLKID_FCLK_DIV7>, - <&clkc_pll CLKID_HIFI_PLL>, - <&xtal>; - clock-names = "fclk_div2", "fclk_div3", - "fclk_div5", "fclk_div7", - "hifi_pll", "xtal"; - }; - - i2c0: i2c@1400 { - compatible = "amlogic,meson-axg-i2c"; - status = "disabled"; - reg = <0x0 0x1400 0x0 0x20>; - interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clkc_periphs CLKID_I2C_M_A>; - power-domains = <&pwrc PWRC_I2C_ID>; - }; - - uart_AO: serial@1c00 { - compatible = "amlogic,meson-a1-uart", - "amlogic,meson-ao-uart"; - reg = <0x0 0x1c00 0x0 0x18>; - interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, <&xtal>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; - status = "disabled"; - }; - - uart_AO_B: serial@2000 { - compatible = "amlogic,meson-a1-uart", - "amlogic,meson-ao-uart"; - reg = <0x0 0x2000 0x0 0x18>; - interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, <&xtal>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; - status = "disabled"; - }; - - saradc: adc@2c00 { - compatible = "amlogic,meson-g12a-saradc", - "amlogic,meson-saradc"; - reg = <0x0 0x2c00 0x0 0x48>; - #io-channel-cells = <1>; - power-domains = <&pwrc PWRC_I2C_ID>; - interrupts = <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, - <&clkc_periphs CLKID_SARADC_EN>, - <&clkc_periphs CLKID_SARADC>, - <&clkc_periphs CLKID_SARADC_SEL>; - clock-names = "clkin", "core", - "adc_clk", "adc_sel"; - status = "disabled"; - }; - - i2c1: i2c@5c00 { - compatible = "amlogic,meson-axg-i2c"; - status = "disabled"; - reg = <0x0 0x5c00 0x0 0x20>; - interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clkc_periphs CLKID_I2C_M_B>; - power-domains = <&pwrc PWRC_I2C_ID>; - }; - - i2c2: i2c@6800 { - compatible = "amlogic,meson-axg-i2c"; - status = "disabled"; - reg = <0x0 0x6800 0x0 0x20>; - interrupts = <GIC_SPI 76 IRQ_TYPE_EDGE_RISING>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clkc_periphs CLKID_I2C_M_C>; - power-domains = <&pwrc PWRC_I2C_ID>; - }; - - i2c3: i2c@6c00 { - compatible = "amlogic,meson-axg-i2c"; - status = "disabled"; - reg = <0x0 0x6c00 0x0 0x20>; - interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clkc_periphs CLKID_I2C_M_D>; - power-domains = <&pwrc PWRC_I2C_ID>; - }; - - usb2_phy1: phy@4000 { - compatible = "amlogic,a1-usb2-phy"; - clocks = <&clkc_periphs CLKID_USB_PHY_IN>; - clock-names = "xtal"; - reg = <0x0 0x4000 0x0 0x60>; - resets = <&reset RESET_USBPHY>; - reset-names = "phy"; - #phy-cells = <0>; - power-domains = <&pwrc PWRC_USB_ID>; - }; - - hwrng: rng@5118 { - compatible = "amlogic,meson-rng"; - reg = <0x0 0x5118 0x0 0x4>; - power-domains = <&pwrc PWRC_OTP_ID>; - }; - - sec_AO: ao-secure@5a20 { - compatible = "amlogic,meson-gx-ao-secure", "syscon"; - reg = <0x0 0x5a20 0x0 0x140>; - amlogic,has-chip-id; - }; - - clkc_pll: pll-clock-controller@7c80 { - compatible = "amlogic,a1-pll-clkc"; - reg = <0 0x7c80 0 0x18c>; - #clock-cells = <1>; - clocks = <&clkc_periphs CLKID_FIXPLL_IN>, - <&clkc_periphs CLKID_HIFIPLL_IN>; - clock-names = "fixpll_in", "hifipll_in"; - }; - - sd_emmc: sd@10000 { - compatible = "amlogic,meson-axg-mmc"; - reg = <0x0 0x10000 0x0 0x800>; - interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clkc_periphs CLKID_SD_EMMC_A>, - <&clkc_periphs CLKID_SD_EMMC>, - <&clkc_pll CLKID_FCLK_DIV2>; - clock-names = "core", - "clkin0", - "clkin1"; - assigned-clocks = <&clkc_periphs CLKID_SD_EMMC_SEL2>; - assigned-clock-parents = <&xtal>; - resets = <&reset RESET_SD_EMMC_A>; - power-domains = <&pwrc PWRC_SD_EMMC_ID>; - status = "disabled"; - }; - }; - - usb: usb@fe004400 { - status = "disabled"; - compatible = "amlogic,meson-a1-usb-ctrl"; - reg = <0x0 0xfe004400 0x0 0xa0>; - interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - clocks = <&clkc_periphs CLKID_USB_CTRL>, - <&clkc_periphs CLKID_USB_BUS>, - <&clkc_periphs CLKID_USB_CTRL_IN>; - clock-names = "usb_ctrl", "usb_bus", "xtal_usb_ctrl"; - resets = <&reset RESET_USBCTRL>; - reset-name = "usb_ctrl"; - - dr_mode = "otg"; - - phys = <&usb2_phy1>; - phy-names = "usb2-phy1"; - - dwc3: usb@ff400000 { - compatible = "snps,dwc3"; - reg = <0x0 0xff400000 0x0 0x100000>; - interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; - dr_mode = "host"; - snps,dis_u2_susphy_quirk; - snps,quirk-frame-length-adjustment = <0x20>; - snps,parkmode-disable-ss-quirk; - }; - - dwc2: usb@ff500000 { - compatible = "amlogic,meson-a1-usb", "snps,dwc2"; - reg = <0x0 0xff500000 0x0 0x40000>; - interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; - phys = <&usb2_phy1>; - phy-names = "usb2-phy"; - clocks = <&clkc_periphs CLKID_USB_PHY>; - clock-names = "otg"; - dr_mode = "peripheral"; - g-rx-fifo-size = <192>; - g-np-tx-fifo-size = <128>; - g-tx-fifo-size = <128 128 16 16 16>; - }; - }; - - gic: interrupt-controller@ff901000 { - compatible = "arm,gic-400"; - reg = <0x0 0xff901000 0x0 0x1000>, - <0x0 0xff902000 0x0 0x2000>, - <0x0 0xff904000 0x0 0x2000>, - <0x0 0xff906000 0x0 0x2000>; - interrupt-controller; - interrupts = <GIC_PPI 9 - (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; - #interrupt-cells = <3>; - #address-cells = <0>; - }; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>; - }; - - xtal: xtal-clk { - compatible = "fixed-clock"; - clock-frequency = <24000000>; - clock-output-names = "xtal"; - #clock-cells = <0>; - }; -}; diff --git a/arch/arm/dts/mt7629.dtsi b/arch/arm/dts/mt7629.dtsi index 7dea7809c70..cd8277deafe 100644 --- a/arch/arm/dts/mt7629.dtsi +++ b/arch/arm/dts/mt7629.dtsi @@ -314,8 +314,10 @@ "sgmii2_cdr_ref", "sgmii2_cdr_fb", "sgmii_ck", "eth2pll"; assigned-clocks = <&topckgen CLK_TOP_ETH_SEL>, - <&topckgen CLK_TOP_F10M_REF_SEL>; + <&topckgen CLK_TOP_F10M_REF_SEL>, + <&topckgen CLK_TOP_SGMII_REF_1_SEL>; assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL1_D2>, + <&topckgen CLK_TOP_SYSPLL4_D16>, <&topckgen CLK_TOP_SGMIIPLL_D2>; power-domains = <&scpsys MT7629_POWER_DOMAIN_ETHSYS>; resets = <ðsys ETHSYS_FE_RST>; diff --git a/arch/arm/dts/r8a7790-u-boot.dtsi b/arch/arm/dts/r8a7790-u-boot.dtsi index 45e2fa6f9f0..2a7d76bd7b1 100644 --- a/arch/arm/dts/r8a7790-u-boot.dtsi +++ b/arch/arm/dts/r8a7790-u-boot.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source extras for U-Boot on RCar R8A7790 SoC + * Device Tree Source extras for U-Boot on R-Car R8A7790 SoC * * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com> */ diff --git a/arch/arm/dts/r8a7791-u-boot.dtsi b/arch/arm/dts/r8a7791-u-boot.dtsi index 7143ffc1658..bb0e2fd106c 100644 --- a/arch/arm/dts/r8a7791-u-boot.dtsi +++ b/arch/arm/dts/r8a7791-u-boot.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source extras for U-Boot on RCar R8A7791 SoC + * Device Tree Source extras for U-Boot on R-Car R8A7791 SoC * * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com> */ diff --git a/arch/arm/dts/r8a7792-u-boot.dtsi b/arch/arm/dts/r8a7792-u-boot.dtsi index 214cfde1f89..ebbdcb7efd5 100644 --- a/arch/arm/dts/r8a7792-u-boot.dtsi +++ b/arch/arm/dts/r8a7792-u-boot.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source extras for U-Boot on RCar R8A7792 SoC + * Device Tree Source extras for U-Boot on R-Car R8A7792 SoC * * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com> */ diff --git a/arch/arm/dts/r8a7793-u-boot.dtsi b/arch/arm/dts/r8a7793-u-boot.dtsi index fb947462c54..08f2248e1f3 100644 --- a/arch/arm/dts/r8a7793-u-boot.dtsi +++ b/arch/arm/dts/r8a7793-u-boot.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source extras for U-Boot on RCar R8A7793 SoC + * Device Tree Source extras for U-Boot on R-Car R8A7793 SoC * * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com> */ diff --git a/arch/arm/dts/r8a7794-u-boot.dtsi b/arch/arm/dts/r8a7794-u-boot.dtsi index 53b54c88917..303afaeb4ce 100644 --- a/arch/arm/dts/r8a7794-u-boot.dtsi +++ b/arch/arm/dts/r8a7794-u-boot.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source extras for U-Boot on RCar R8A7794 SoC + * Device Tree Source extras for U-Boot on R-Car R8A7794 SoC * * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com> */ diff --git a/arch/arm/dts/r8a77951-u-boot.dtsi b/arch/arm/dts/r8a77951-u-boot.dtsi index 4cbec591479..c16c5116592 100644 --- a/arch/arm/dts/r8a77951-u-boot.dtsi +++ b/arch/arm/dts/r8a77951-u-boot.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source extras for U-Boot on RCar R8A7795 SoC + * Device Tree Source extras for U-Boot on R-Car R8A7795 SoC * * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com> */ diff --git a/arch/arm/dts/r8a77960-u-boot.dtsi b/arch/arm/dts/r8a77960-u-boot.dtsi index 15a91474324..2245be2aa76 100644 --- a/arch/arm/dts/r8a77960-u-boot.dtsi +++ b/arch/arm/dts/r8a77960-u-boot.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source extras for U-Boot on RCar R8A7796 SoC + * Device Tree Source extras for U-Boot on R-Car R8A7796 SoC * * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com> */ diff --git a/arch/arm/dts/r8a77965-u-boot.dtsi b/arch/arm/dts/r8a77965-u-boot.dtsi index 54107d1ae35..f39acc237d3 100644 --- a/arch/arm/dts/r8a77965-u-boot.dtsi +++ b/arch/arm/dts/r8a77965-u-boot.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source extras for U-Boot on RCar R8A77965 SoC + * Device Tree Source extras for U-Boot on R-Car R8A77965 SoC * * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com> */ diff --git a/arch/arm/dts/r8a77970-u-boot.dtsi b/arch/arm/dts/r8a77970-u-boot.dtsi index d252c2e8e6c..7900c641ba1 100644 --- a/arch/arm/dts/r8a77970-u-boot.dtsi +++ b/arch/arm/dts/r8a77970-u-boot.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source extras for U-Boot on RCar R8A77970 SoC + * Device Tree Source extras for U-Boot on R-Car R8A77970 SoC * * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com> */ diff --git a/arch/arm/dts/r8a77980-u-boot.dtsi b/arch/arm/dts/r8a77980-u-boot.dtsi index 9f7bf499bc0..aa7e058c585 100644 --- a/arch/arm/dts/r8a77980-u-boot.dtsi +++ b/arch/arm/dts/r8a77980-u-boot.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source extras for U-Boot on RCar R8A77980 SoC + * Device Tree Source extras for U-Boot on R-Car R8A77980 SoC * * Copyright (C) 2019 Marek Vasut <marek.vasut@gmail.com> */ diff --git a/arch/arm/dts/r8a77990-u-boot.dtsi b/arch/arm/dts/r8a77990-u-boot.dtsi index 50bbbe18647..b701f68db81 100644 --- a/arch/arm/dts/r8a77990-u-boot.dtsi +++ b/arch/arm/dts/r8a77990-u-boot.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source extras for U-Boot on RCar R8A77990 SoC + * Device Tree Source extras for U-Boot on R-Car R8A77990 SoC * * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com> */ diff --git a/arch/arm/dts/r8a77995-u-boot.dtsi b/arch/arm/dts/r8a77995-u-boot.dtsi index 347b59ac42c..f4bafb6d088 100644 --- a/arch/arm/dts/r8a77995-u-boot.dtsi +++ b/arch/arm/dts/r8a77995-u-boot.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source extras for U-Boot on RCar R8A77995 SoC + * Device Tree Source extras for U-Boot on R-Car R8A77995 SoC * * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com> */ diff --git a/arch/arm/dts/r8a779g0-u-boot.dtsi b/arch/arm/dts/r8a779g0-u-boot.dtsi index f60eba531e4..2e731b628b3 100644 --- a/arch/arm/dts/r8a779g0-u-boot.dtsi +++ b/arch/arm/dts/r8a779g0-u-boot.dtsi @@ -7,11 +7,184 @@ #include "r8a779x-u-boot.dtsi" +/ { + binman: binman { + multiple-images; + + section { + filename = "flash.bin"; + pad-byte = <0xff>; + + /* Offset 0x0000 set to 0x0000_0000 */ + fill@0 { + offset = <0x0>; + size = <0x4>; + fill-byte = [00]; + }; + + /* Offset 0x300c set to 0x0000_0000 */ + fill@300c { + offset = <0x300c>; + size = <0x4>; + fill-byte = [00]; + }; + + /* Offset 0x3154 set to 0xeb21_0000 */ + fill@3154 { + offset = <0x3154>; + size = <0x2>; + fill-byte = [00]; + }; + + fill@3156 { + offset = <0x3156>; + size = <0x1>; + fill-byte = [21]; + }; + + fill@3157 { + offset = <0x3157>; + size = <0x1>; + fill-byte = [eb]; + }; + + /* Offset 0x3264 set to 0x0003_b000 */ + fill@3264 { + offset = <0x3264>; + size = <0x1>; + fill-byte = [00]; + }; + + fill@3265 { + offset = <0x3265>; + size = <0x1>; + fill-byte = [b0]; + }; + + fill@3266 { + offset = <0x3266>; + size = <0x1>; + fill-byte = [03]; + }; + + fill@3267 { + offset = <0x3267>; + size = <0x1>; + fill-byte = [00]; + }; + + u-boot-spl { + offset = <0x40000>; + align-end = <4>; + }; + + u-boot { + offset = <CONFIG_SYS_SPI_U_BOOT_OFFS>; + filename = "u-boot.itb"; + + fit { + description = "U-Boot mainline"; + fit,fdt-list = "of-list"; + #address-cells = <1>; + + images { + uboot { + arch = "arm64"; + compression = "none"; + description = "U-Boot (64-bit)"; + type = "standalone"; + /* + * This is in DRAM. We cannot + * use TEXT_BASE here because + * this system uses PIE build + * and TEXT_BASE=0x0 . + */ + entry = <0x44100000>; + load = <0x44100000>; + + uboot-blob { + filename = "u-boot-nodtb.bin"; + type = "blob-ext"; + }; + }; + + @fdt-SEQ { + compression = "none"; + description = "NAME"; + type = "flat_dt"; + + uboot-fdt-blob { + filename = "u-boot.dtb"; + type = "blob-ext"; + }; + }; + }; + + configurations { + default = "@config-DEFAULT-SEQ"; + + @config-SEQ { + description = "NAME"; + fdt = "fdt-SEQ"; + firmware = "uboot"; + }; + }; + }; + }; + }; + }; +}; + +&cpg { + bootph-all; +}; + +&extalr_clk { + bootph-all; +}; + +&hscif0 { + bootph-all; +}; + +&hscif0_pins { + bootph-all; +}; + +&pfc { + bootph-all; +}; + &rpc { bank-width = <2>; num-cs = <1>; }; -&extalr_clk { +&rst { bootph-all; }; + +&soc { + apmu@e6170000 { /* Remoteproc */ + compatible = "renesas,r8a779g0-cr52"; + reg = <0 0xe6170000 0 0x80000>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + status = "okay"; + }; + + ram@e6780000 { /* DBSC5 */ + compatible = "renesas,r8a779g0-dbsc"; + reg = <0 0xe6780000 0 0x80000>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + status = "okay"; + bootph-all; + }; + + ram@ffec0000 { /* RT-VRAM */ + compatible = "renesas,r8a779g0-rtvram"; + reg = <0 0xffec0000 0 0xf000>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + status = "okay"; + bootph-all; + }; +}; diff --git a/arch/arm/dts/r8a779g0-white-hawk-u-boot.dtsi b/arch/arm/dts/r8a779g0-white-hawk-u-boot.dtsi index c3704d789e8..85e32208b29 100644 --- a/arch/arm/dts/r8a779g0-white-hawk-u-boot.dtsi +++ b/arch/arm/dts/r8a779g0-white-hawk-u-boot.dtsi @@ -13,9 +13,23 @@ }; }; +&avb1 { + status = "disabled"; +}; + +&avb2 { + status = "disabled"; +}; + &rpc { + bootph-all; flash@0 { + bootph-all; spi-tx-bus-width = <1>; spi-rx-bus-width = <1>; }; }; + +&qspi0_pins { + bootph-all; +}; diff --git a/arch/arm/dts/r8a779x-u-boot.dtsi b/arch/arm/dts/r8a779x-u-boot.dtsi index 001ac59adb9..d1441f1f9df 100644 --- a/arch/arm/dts/r8a779x-u-boot.dtsi +++ b/arch/arm/dts/r8a779x-u-boot.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source extras for U-Boot on RCar Gen3 + * Device Tree Source extras for U-Boot on R-Car Gen3 * * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com> */ diff --git a/arch/arm/dts/socfpga_stratix10.dtsi b/arch/arm/dts/socfpga_stratix10.dtsi index eb82d663204..eb82d663204 100755..100644 --- a/arch/arm/dts/socfpga_stratix10.dtsi +++ b/arch/arm/dts/socfpga_stratix10.dtsi diff --git a/arch/arm/dts/socfpga_stratix10_socdk-u-boot.dtsi b/arch/arm/dts/socfpga_stratix10_socdk-u-boot.dtsi index ef0df769762..ef0df769762 100755..100644 --- a/arch/arm/dts/socfpga_stratix10_socdk-u-boot.dtsi +++ b/arch/arm/dts/socfpga_stratix10_socdk-u-boot.dtsi diff --git a/arch/arm/dts/socfpga_stratix10_socdk.dts b/arch/arm/dts/socfpga_stratix10_socdk.dts index e6d8fe6a907..e6d8fe6a907 100755..100644 --- a/arch/arm/dts/socfpga_stratix10_socdk.dts +++ b/arch/arm/dts/socfpga_stratix10_socdk.dts diff --git a/arch/arm/dts/stm32mp15-u-boot.dtsi b/arch/arm/dts/stm32mp15-u-boot.dtsi index 66d4c40c6a8..3f57bd5fe0f 100644 --- a/arch/arm/dts/stm32mp15-u-boot.dtsi +++ b/arch/arm/dts/stm32mp15-u-boot.dtsi @@ -186,6 +186,9 @@ bootph-all; #address-cells = <1>; #size-cells = <0>; + clock-names = "hse", "hsi", "csi", "lse", "lsi"; + clocks = <&clk_hse>, <&clk_hsi>, <&clk_csi>, + <&clk_lse>, <&clk_lsi>; }; &usart1 { diff --git a/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi index 08439342cb2..ab162f39473 100644 --- a/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi +++ b/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi @@ -112,6 +112,10 @@ }; &rcc { + clock-names = "hse", "hsi", "csi", "lse", "lsi"; + clocks = <&clk_hse>, <&clk_hsi>, <&clk_csi>, + <&clk_lse>, <&clk_lsi>; + st,clksrc = < CLK_MPU_PLL1P CLK_AXI_PLL2P diff --git a/arch/arm/dts/zynqmp-binman-mini.dts b/arch/arm/dts/zynqmp-binman-mini.dts new file mode 100644 index 00000000000..8f3d18ef394 --- /dev/null +++ b/arch/arm/dts/zynqmp-binman-mini.dts @@ -0,0 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * (C) Copyright 2024, Advanced Micro Devices, Inc. + * + * Michal Simek <michal.simek@amd.com> + */ + +/dts-v1/; + +#include "zynqmp-u-boot.dtsi" diff --git a/arch/arm/dts/zynqmp-binman-som.dts b/arch/arm/dts/zynqmp-binman-som.dts new file mode 100644 index 00000000000..3d9d8476c98 --- /dev/null +++ b/arch/arm/dts/zynqmp-binman-som.dts @@ -0,0 +1,225 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for Xilinx ZynqMP SOMs (k24/k26) + * + * (C) Copyright 2024, Advanced Micro Devices, Inc. + * + * Michal Simek <michal.simek@amd.com> + */ + +#include <config.h> + +/dts-v1/; +/ { + binman: binman { + multiple-images; + fit-dtb.blob { + filename = "fit-dtb.blob"; + pad-byte = <0>; + fit { + fit,align = <0x8>; + fit,external-offset = <0x0>; + description = "DTBs for SOMs+CCs"; + fit,fdt-list-val = "zynqmp-smk-k26-revA", "zynqmp-smk-k26-revA-sck-kr-g-revA", + "zynqmp-smk-k26-revA-sck-kr-g-revB", "zynqmp-smk-k26-revA-sck-kv-g-revA", + "zynqmp-smk-k26-revA-sck-kv-g-revB", "zynqmp-sm-k26-revA-sck-kv-g-revA", + "zynqmp-sm-k26-revA-sck-kv-g-revB", "zynqmp-sm-k26-revA-sck-kr-g-revB", + "zynqmp-smk-k24-revA-sck-kd-g-revA", "zynqmp-smk-k24-revA-sck-kv-g-revB", + "zynqmp-smk-k24-revA-sck-kr-g-revB", "zynqmp-sm-k24-revA-sck-kd-g-revA", + "zynqmp-sm-k24-revA-sck-kv-g-revB", "zynqmp-sm-k24-revA-sck-kr-g-revB"; + + images { + @fdt-SEQ { + description = "NAME"; + type = "flat_dt"; + arch = "arm64"; + compression = "none"; + hash-1 { + algo = "md5"; + }; + }; + }; + configurations { + default = "conf-1"; + conf-1 { + description = "SOM itself"; + fdt = "fdt-1"; + }; + conf-2 { + description = "zynqmp-smk-k26-.*-sck-kr-g-revA"; + fdt = "fdt-2"; + }; + conf-3 { + description = "zynqmp-smk-k26-.*-sck-kr-g-.*"; + fdt = "fdt-3"; + }; + conf-4 { + description = "zynqmp-smk-k26-.*-sck-kv-g-rev[AZ]"; + fdt = "fdt-4"; + }; + conf-5 { + description = "zynqmp-smk-k26-.*-sck-kv-g-.*"; + fdt = "fdt-5"; + }; + conf-6 { + description = "zynqmp-sm-k26-.*-sck-kv-g-rev[AZ]"; + fdt = "fdt-6"; + }; + conf-7 { + description = "zynqmp-sm-k26-.*-sck-kv-g-.*"; + fdt = "fdt-7"; + }; + conf-8 { + description = "zynqmp-sm-k26-.*-sck-kr-g-.*"; + fdt = "fdt-8"; + }; + conf-9 { + description = "zynqmp-smk-k24-.*-sck-kd-g-.*"; + fdt = "fdt-9"; + }; + conf-10 { + description = "zynqmp-smk-k24-.*-sck-kv-g-.*"; + fdt = "fdt-10"; + }; + conf-11 { + description = "zynqmp-smk-k24-.*-sck-kr-g-.*"; + fdt = "fdt-11"; + }; + conf-12 { + description = "zynqmp-sm-k24-.*-sck-kd-g-.*"; + fdt = "fdt-12"; + }; + conf-13 { + description = "zynqmp-sm-k24-.*-sck-kv-g-.*"; + fdt = "fdt-13"; + }; + conf-14 { + description = "zynqmp-sm-k24-.*-sck-kr-g-.*"; + fdt = "fdt-14"; + }; + }; + }; + }; + + /* u-boot.itb generation in a static way */ + itb { + filename = "u-boot.itb"; + pad-byte = <0>; + + fit { + description = "Configuration for Xilinx ZynqMP SoC"; + fit,align = <0x8>; + fit,external-offset = <0x0>; + images { + uboot { + description = "U-Boot (64-bit)"; + type = "firmware"; + os = "u-boot"; + arch = "arm64"; + compression = "none"; + load = /bits/ 64 <CONFIG_TEXT_BASE>; + entry = /bits/ 64 <CONFIG_TEXT_BASE>; + hash { + algo = "md5"; + }; + u-boot-nodtb { + }; + }; + atf { + description = "Trusted Firmware-A"; + type = "firmware"; + os = "arm-trusted-firmware"; + arch = "arm64"; + compression = "none"; + load = /bits/ 64 <CONFIG_BL31_LOAD_ADDR>; + entry = /bits/ 64 <CONFIG_BL31_LOAD_ADDR>; + hash { + algo = "md5"; + }; + atf-bl31 { + optional; + }; + }; + tee { + description = "OP-TEE"; + type = "tee"; + arch = "arm64"; + compression = "none"; + os = "tee"; + load = /bits/ 64 <CONFIG_BL31_LOAD_ADDR>; + entry = /bits/ 64 <CONFIG_BL31_LOAD_ADDR>; + tee-os { + optional; + }; + }; + fdt { + description = "Multi DTB fit image"; + type = "flat_dt"; + arch = "arm64"; + compression = "none"; + load = <0x0 0x100000>; + hash { + algo = "md5"; + }; + fdt-blob { + filename = "fit-dtb.blob"; + type = "blob-ext"; + }; + }; + }; + configurations { + default = "conf-1"; + conf-1 { + description = "Multi DTB with TF-A/TEE"; + firmware = "atf"; + loadables = "tee", "uboot", "fdt"; + }; + }; + }; + }; + + /* boot.bin generated with version string inside */ + bootimage { + filename = "boot.bin"; + pad-byte = <0>; + + blob-ext@1 { + offset = <0x0>; + filename = "spl/boot.bin"; + }; + /* Optional version string at offset 0x70 */ + blob-ext@2 { + offset = <0x70>; + filename = "version.bin"; + overlap; + optional; + }; + /* Optional version string at offset 0x94 */ + blob-ext@3 { + offset = <0x94>; + filename = "version.bin"; + overlap; + optional; + }; + }; + +#ifdef CONFIG_SYS_SPI_U_BOOT_OFFS + /* Full QSPI image for recovery app */ + image { + filename = "qspi.bin"; + pad-byte = <0>; + + blob-ext@1 { + offset = <0x0>; + filename = "boot.bin"; + }; + blob-ext@2 { + offset = <CONFIG_SYS_SPI_U_BOOT_OFFS>; + filename = "u-boot.itb"; + }; + fdtmap { + }; + }; +#endif + }; +}; diff --git a/arch/arm/dts/zynqmp-binman.dts b/arch/arm/dts/zynqmp-binman.dts new file mode 100644 index 00000000000..675f6bf51eb --- /dev/null +++ b/arch/arm/dts/zynqmp-binman.dts @@ -0,0 +1,206 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for Xilinx ZynqMP platforms + * + * (C) Copyright 2024, Advanced Micro Devices, Inc. + * + * Michal Simek <michal.simek@amd.com> + */ + +#include <config.h> + +/dts-v1/; +/ { + binman: binman { + multiple-images; + + /* u-boot.itb generation in a static way */ + itb { + filename = "u-boot.itb"; + pad-byte = <0>; + + fit { + description = "Configuration for Xilinx ZynqMP SoC"; + fit,align = <0x8>; + fit,external-offset = <0x0>; + fit,fdt-list = "of-list"; + images { + uboot { + description = "U-Boot (64-bit)"; + type = "firmware"; + os = "u-boot"; + arch = "arm64"; + compression = "none"; + load = /bits/ 64 <CONFIG_TEXT_BASE>; + entry = /bits/ 64 <CONFIG_TEXT_BASE>; + hash { + algo = "md5"; + }; + u-boot-nodtb { + }; + }; + atf { + description = "Trusted Firmware-A"; + type = "firmware"; + os = "arm-trusted-firmware"; + arch = "arm64"; + compression = "none"; + load = /bits/ 64 <CONFIG_BL31_LOAD_ADDR>; + entry = /bits/ 64 <CONFIG_BL31_LOAD_ADDR>; + hash { + algo = "md5"; + }; + atf-bl31 { + optional; + }; + }; + tee { + description = "OP-TEE"; + type = "tee"; + arch = "arm64"; + compression = "none"; + os = "tee"; + load = /bits/ 64 <CONFIG_BL31_LOAD_ADDR>; + entry = /bits/ 64 <CONFIG_BL31_LOAD_ADDR>; + tee-os { + optional; + }; + }; + @fdt-SEQ { + description = "NAME"; + type = "flat_dt"; + arch = "arm64"; + compression = "none"; + load = <0x0 0x100000>; + hash-1 { + algo = "md5"; + }; + }; + }; + configurations { + default = "@conf-DEFAULT-SEQ"; + @conf-SEQ { + description = "NAME"; + firmware = "atf"; + loadables = "tee", "uboot"; + fdt = "fdt-SEQ"; + }; + }; + }; + }; + + itb-single { + filename = "u-boot-single.itb"; + pad-byte = <0>; + + fit { + description = "Configuration for Xilinx ZynqMP SoC"; + fit,align = <0x8>; + fit,external-offset = <0x0>; + fit,fdt-list = "of-list"; + images { + uboot { + description = "U-Boot (64-bit)"; + type = "firmware"; + os = "u-boot"; + arch = "arm64"; + compression = "none"; + load = /bits/ 64 <CONFIG_TEXT_BASE>; + entry = /bits/ 64 <CONFIG_TEXT_BASE>; + hash { + algo = "md5"; + }; + u-boot-nodtb { + }; + }; + atf { + description = "Trusted Firmware-A"; + type = "firmware"; + os = "arm-trusted-firmware"; + arch = "arm64"; + compression = "none"; + load = /bits/ 64 <CONFIG_BL31_LOAD_ADDR>; + entry = /bits/ 64 <CONFIG_BL31_LOAD_ADDR>; + hash { + algo = "md5"; + }; + atf-bl31 { + optional; + }; + }; + tee { + description = "OP-TEE"; + type = "tee"; + arch = "arm64"; + compression = "none"; + os = "tee"; + load = /bits/ 64 <CONFIG_BL31_LOAD_ADDR>; + entry = /bits/ 64 <CONFIG_BL31_LOAD_ADDR>; + tee-os { + optional; + }; + }; + fdt { + description = "DT"; + type = "flat_dt"; + arch = "arm64"; + compression = "none"; + load = <0x0 0x100000>; + uboot-fdt-blob { + filename = "u-boot.dtb"; + type = "blob-ext"; + }; + hash-1 { + algo = "md5"; + }; + + }; + }; + configurations { + default = "conf-1"; + conf-1 { + description = "Single DT"; + firmware = "atf"; + loadables = "tee", "uboot"; + fdt = "fdt"; + }; + }; + }; + }; + +#ifdef CONFIG_SYS_SPI_U_BOOT_OFFS + /* QSPI image for testing QSPI boot mode */ + image { + filename = "qspi.bin"; + pad-byte = <0>; + + blob-ext@1 { + offset = <0x0>; + filename = "spl/boot.bin"; + }; + blob-ext@2 { + offset = <CONFIG_SYS_SPI_U_BOOT_OFFS>; + filename = "u-boot.itb"; + }; + fdtmap { + }; + }; + + image-single { + filename = "qspi-single.bin"; + pad-byte = <0>; + + blob-ext@1 { + offset = <0x0>; + filename = "spl/boot.bin"; + }; + blob-ext@2 { + offset = <CONFIG_SYS_SPI_U_BOOT_OFFS>; + filename = "u-boot-single.itb"; + }; + fdtmap { + }; + }; +#endif + }; +}; diff --git a/arch/arm/dts/zynqmp-clk-ccf.dtsi b/arch/arm/dts/zynqmp-clk-ccf.dtsi index dd4569e7bd9..60d1b1acf9a 100644 --- a/arch/arm/dts/zynqmp-clk-ccf.dtsi +++ b/arch/arm/dts/zynqmp-clk-ccf.dtsi @@ -70,6 +70,22 @@ clocks = <&zynqmp_clk ACPU>; }; +&cpu0_debug { + clocks = <&zynqmp_clk DBF_FPD>; +}; + +&cpu1_debug { + clocks = <&zynqmp_clk DBF_FPD>; +}; + +&cpu2_debug { + clocks = <&zynqmp_clk DBF_FPD>; +}; + +&cpu3_debug { + clocks = <&zynqmp_clk DBF_FPD>; +}; + &fpd_dma_chan1 { clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>; }; diff --git a/arch/arm/dts/zynqmp-sc-revB.dts b/arch/arm/dts/zynqmp-sc-revB.dts index 1af3f643567..c4f70581695 100644 --- a/arch/arm/dts/zynqmp-sc-revB.dts +++ b/arch/arm/dts/zynqmp-sc-revB.dts @@ -3,7 +3,7 @@ * dts file for Xilinx ZynqMP Generic System Controller * * (C) Copyright 2021 - 2022, Xilinx, Inc. - * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc. + * (C) Copyright 2022 - 2024, Advanced Micro Devices, Inc. * * Michal Simek <michal.simek@amd.com> */ @@ -80,7 +80,7 @@ pwm-fan { compatible = "pwm-fan"; status = "okay"; - pwms = <&ttc0 2 40000 1>; + pwms = <&ttc0 2 40000 0>; }; }; diff --git a/arch/arm/dts/zynqmp-sck-kd-g-revA.dtso b/arch/arm/dts/zynqmp-sck-kd-g-revA.dtso index 4de29d5d3ff..d56e863ce1c 100644 --- a/arch/arm/dts/zynqmp-sck-kd-g-revA.dtso +++ b/arch/arm/dts/zynqmp-sck-kd-g-revA.dtso @@ -80,7 +80,10 @@ "", ""; }; - /* usb5744@2d */ + hub: usb-hub@2d { /* u36 */ + compatible = "microchip,usb5744"; + reg = <0x2d>; + }; }; /* USB 3.0 */ @@ -99,18 +102,6 @@ phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; reset-gpios = <&slg7xl45106 0 GPIO_ACTIVE_LOW>; assigned-clock-rates = <250000000>, <20000000>; -#if 0 - usbhub0: usb-hub { /* u36 */ - i2c-bus = <&i2c1>; - compatible = "microchip,usb5744"; - reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>; - }; - - usb2244: usb-sd { /* u41 */ - compatible = "microchip,usb2244"; - reset-gpios = <&slg7xl45106 2 GPIO_ACTIVE_LOW>; - }; -#endif }; &dwc3_0 { @@ -118,6 +109,26 @@ dr_mode = "host"; snps,usb3_lpm_capable; maximum-speed = "super-speed"; + #address-cells = <1>; + #size-cells = <0>; + + /* 2.0 hub on port 1 */ + hub_2_0: hub@1 { + compatible = "usb424,2744"; + reg = <1>; + peer-hub = <&hub_3_0>; + i2c-bus = <&hub>; + reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>; + }; + + /* 3.0 hub on port 2 */ + hub_3_0: hub@2 { + compatible = "usb424,5744"; + reg = <2>; + peer-hub = <&hub_2_0>; + i2c-bus = <&hub>; + reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>; + }; }; &gem1 { /* mdio mio50/51 */ diff --git a/arch/arm/dts/zynqmp-sck-kr-g-revA.dtso b/arch/arm/dts/zynqmp-sck-kr-g-revA.dtso index 6349a0e1087..9d0c0c2885d 100644 --- a/arch/arm/dts/zynqmp-sck-kr-g-revA.dtso +++ b/arch/arm/dts/zynqmp-sck-kr-g-revA.dtso @@ -105,11 +105,19 @@ #address-cells = <1>; #size-cells = <0>; reg = <0>; + hub_1: usb-hub@2d { + compatible = "microchip,usb5744"; + reg = <0x2d>; + }; }; usbhub_i2c1: i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; + hub_2: usb-hub@2d { + compatible = "microchip,usb5744"; + reg = <0x2d>; + }; }; /* Bus 2/3 are not connected */ }; @@ -145,18 +153,6 @@ phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; reset-gpios = <&slg7xl45106 0 GPIO_ACTIVE_LOW>; assigned-clock-rates = <250000000>, <20000000>; -#if 0 - usbhub0: usb-hub { /* u43 */ - i2c-bus = <&usbhub_i2c0>; - compatible = "microchip,usb5744"; - reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>; - }; - - usb2244: usb-sd { /* u38 */ - compatible = "microchip,usb2244"; - reset-gpios = <&slg7xl45106 2 GPIO_ACTIVE_LOW>; - }; -#endif }; &dwc3_0 { @@ -164,6 +160,26 @@ dr_mode = "host"; snps,usb3_lpm_capable; maximum-speed = "super-speed"; + #address-cells = <1>; + #size-cells = <0>; + + /* 2.0 hub on port 1 */ + hub_2_0: hub@1 { + compatible = "usb424,2744"; + reg = <1>; + peer-hub = <&hub_3_0>; + i2c-bus = <&hub_1>; + reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>; + }; + + /* 3.0 hub on port 2 */ + hub_3_0: hub@2 { + compatible = "usb424,5744"; + reg = <2>; + peer-hub = <&hub_2_0>; + i2c-bus = <&hub_1>; + reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>; + }; }; &usb1 { /* mio64 - mio75 */ @@ -174,13 +190,6 @@ phys = <&psgtr 3 PHY_TYPE_USB3 1 2>; reset-gpios = <&slg7xl45106 1 GPIO_ACTIVE_LOW>; assigned-clock-rates = <250000000>, <20000000>; -#if 0 - usbhub1: usb-hub { /* u84 */ - i2c-bus = <&usbhub_i2c1>; - compatible = "microchip,usb5744"; - reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>; - }; -#endif }; &dwc3_1 { @@ -188,6 +197,26 @@ dr_mode = "host"; snps,usb3_lpm_capable; maximum-speed = "super-speed"; + #address-cells = <1>; + #size-cells = <0>; + + /* 2.0 hub on port 1 */ + hub1_2_0: hub@1 { + compatible = "usb424,2744"; + reg = <1>; + peer-hub = <&hub1_3_0>; + i2c-bus = <&hub_2>; + reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>; + }; + + /* 3.0 hub on port 2 */ + hub1_3_0: hub@2 { + compatible = "usb424,5744"; + reg = <2>; + peer-hub = <&hub1_2_0>; + i2c-bus = <&hub_2>; + reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>; + }; }; &gem0 { /* mdio mio50/51 */ diff --git a/arch/arm/dts/zynqmp-sck-kr-g-revB.dtso b/arch/arm/dts/zynqmp-sck-kr-g-revB.dtso index b0d737d3caf..0d915d496ca 100644 --- a/arch/arm/dts/zynqmp-sck-kr-g-revB.dtso +++ b/arch/arm/dts/zynqmp-sck-kr-g-revB.dtso @@ -117,11 +117,19 @@ #address-cells = <1>; #size-cells = <0>; reg = <0>; + hub_1: usb-hub@2d { + compatible = "microchip,usb5744"; + reg = <0x2d>; + }; }; usbhub_i2c1: i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; + hub_2: usb-hub@2d { + compatible = "microchip,usb5744"; + reg = <0x2d>; + }; }; /* Bus 2/3 are not connected */ }; @@ -165,18 +173,6 @@ phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; reset-gpios = <&slg7xl45106 0 GPIO_ACTIVE_LOW>; assigned-clock-rates = <250000000>, <20000000>; -#if 0 - usbhub0: usb-hub { /* u43 */ - i2c-bus = <&usbhub_i2c0>; - compatible = "microchip,usb5744"; - reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>; - }; - - usb2244: usb-sd { /* u38 */ - compatible = "microchip,usb2244"; - reset-gpios = <&slg7xl45106 2 GPIO_ACTIVE_LOW>; - }; -#endif }; &dwc3_0 { @@ -184,6 +180,26 @@ dr_mode = "host"; snps,usb3_lpm_capable; maximum-speed = "super-speed"; + #address-cells = <1>; + #size-cells = <0>; + + /* 2.0 hub on port 1 */ + hub_2_0: hub@1 { + compatible = "usb424,2744"; + reg = <1>; + peer-hub = <&hub_3_0>; + i2c-bus = <&hub_1>; + reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>; + }; + + /* 3.0 hub on port 2 */ + hub_3_0: hub@2 { + compatible = "usb424,5744"; + reg = <2>; + peer-hub = <&hub_2_0>; + i2c-bus = <&hub_1>; + reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>; + }; }; &usb1 { /* mio64 - mio75 */ @@ -194,14 +210,6 @@ phys = <&psgtr 3 PHY_TYPE_USB3 1 2>; reset-gpios = <&slg7xl45106 1 GPIO_ACTIVE_LOW>; assigned-clock-rates = <250000000>, <20000000>; - -#if 0 - usbhub1: usb-hub { /* u84 */ - i2c-bus = <&usbhub_i2c1>; - compatible = "microchip,usb5744"; - reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>; - }; -#endif }; &dwc3_1 { @@ -209,6 +217,26 @@ dr_mode = "host"; snps,usb3_lpm_capable; maximum-speed = "super-speed"; + #address-cells = <1>; + #size-cells = <0>; + + /* 2.0 hub on port 1 */ + hub1_2_0: hub@1 { + compatible = "usb424,2744"; + reg = <1>; + peer-hub = <&hub1_3_0>; + i2c-bus = <&hub_2>; + reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>; + }; + + /* 3.0 hub on port 2 */ + hub1_3_0: hub@2 { + compatible = "usb424,5744"; + reg = <2>; + peer-hub = <&hub1_2_0>; + i2c-bus = <&hub_2>; + reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>; + }; }; &gem0 { /* mdio mio50/51 */ diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revA.dtso b/arch/arm/dts/zynqmp-sck-kv-g-revA.dtso index 561b546e37f..a98a888d138 100644 --- a/arch/arm/dts/zynqmp-sck-kv-g-revA.dtso +++ b/arch/arm/dts/zynqmp-sck-kv-g-revA.dtso @@ -129,12 +129,6 @@ pinctrl-0 = <&pinctrl_usb0_default>; phy-names = "usb3-phy"; phys = <&psgtr 2 PHY_TYPE_USB3 0 1>; -#if 0 - usbhub: usb5744 { /* u43 */ - compatible = "microchip,usb5744"; - reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>; - }; -#endif }; &dwc3_0 { @@ -142,6 +136,24 @@ dr_mode = "host"; snps,usb3_lpm_capable; maximum-speed = "super-speed"; + #address-cells = <1>; + #size-cells = <0>; + + /* 2.0 hub on port 1 */ + hub_2_0: hub@1 { + compatible = "usb424,2744"; + reg = <1>; + peer-hub = <&hub_3_0>; + reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>; + }; + + /* 3.0 hub on port 2 */ + hub_3_0: hub@2 { + compatible = "usb424,5744"; + reg = <2>; + peer-hub = <&hub_2_0>; + reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>; + }; }; &sdhci1 { /* on CC with tuned parameters */ diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revB.dtso b/arch/arm/dts/zynqmp-sck-kv-g-revB.dtso index 64683e0ccbb..7490efea98b 100644 --- a/arch/arm/dts/zynqmp-sck-kv-g-revB.dtso +++ b/arch/arm/dts/zynqmp-sck-kv-g-revB.dtso @@ -92,7 +92,10 @@ label = "ina260-u14"; reg = <0x40>; }; - /* u43 - 0x2d - USB hub */ + hub: usb-hub@2d { + compatible = "microchip,usb5744"; + reg = <0x2d>; + }; /* u27 - 0xe0 - STDP4320 DP/HDMI splitter */ }; @@ -131,14 +134,6 @@ phy-names = "usb3-phy"; phys = <&psgtr 2 PHY_TYPE_USB3 0 1>; assigned-clock-rates = <250000000>, <20000000>; -#if 0 - usb5744: usb-hub { /* u43 */ - status = "okay"; - compatible = "microchip,usb5744"; - i2c-bus = <&i2c1>; - reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>; - }; -#endif }; &dwc3_0 { @@ -146,6 +141,26 @@ dr_mode = "host"; snps,usb3_lpm_capable; maximum-speed = "super-speed"; + #address-cells = <1>; + #size-cells = <0>; + + /* 2.0 hub on port 1 */ + hub_2_0: hub@1 { + compatible = "usb424,2744"; + reg = <1>; + peer-hub = <&hub_3_0>; + i2c-bus = <&hub>; + reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>; + }; + + /* 3.0 hub on port 2 */ + hub_3_0: hub@2 { + compatible = "usb424,5744"; + reg = <2>; + peer-hub = <&hub_2_0>; + i2c-bus = <&hub>; + reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>; + }; }; &sdhci1 { /* on CC with tuned parameters */ diff --git a/arch/arm/dts/zynqmp-sm-k26-revA.dts b/arch/arm/dts/zynqmp-sm-k26-revA.dts index 8056f6b176e..620f5185cc4 100644 --- a/arch/arm/dts/zynqmp-sm-k26-revA.dts +++ b/arch/arm/dts/zynqmp-sm-k26-revA.dts @@ -3,7 +3,7 @@ * dts file for Xilinx ZynqMP SM-K26 rev2/1/B/A * * (C) Copyright 2020 - 2021, Xilinx, Inc. - * (C) Copyright 2023, Advanced Micro Devices, Inc. + * (C) Copyright 2023 - 2024, Advanced Micro Devices, Inc. * * Michal Simek <michal.simek@amd.com> */ @@ -387,6 +387,7 @@ &rtc { status = "okay"; + calibration = <0x7fff>; }; &lpd_dma_chan1 { diff --git a/arch/arm/dts/zynqmp-smk-k26-revA.dts b/arch/arm/dts/zynqmp-smk-k26-revA.dts index 719a4e49b57..b804abe89d1 100644 --- a/arch/arm/dts/zynqmp-smk-k26-revA.dts +++ b/arch/arm/dts/zynqmp-smk-k26-revA.dts @@ -3,7 +3,7 @@ * dts file for Xilinx ZynqMP SMK-K26 rev2/1/B/A * * (C) Copyright 2020 - 2021, Xilinx, Inc. - * (C) Copyright 2023, Advanced Micro Devices, Inc. + * (C) Copyright 2023 - 2024, Advanced Micro Devices, Inc. * * Michal Simek <michal.simek@amd.com> */ diff --git a/arch/arm/dts/zynqmp-u-boot.dtsi b/arch/arm/dts/zynqmp-u-boot.dtsi new file mode 100644 index 00000000000..9a7527ed5a1 --- /dev/null +++ b/arch/arm/dts/zynqmp-u-boot.dtsi @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * (C) Copyright 2024, Advanced Micro Devices, Inc. + * + * Michal Simek <michal.simek@amd.com> + */ + +/ { + binman: binman { + }; +}; diff --git a/arch/arm/dts/zynqmp-zcu102-revA.dts b/arch/arm/dts/zynqmp-zcu102-revA.dts index 3132fa533b8..dd63d22f45e 100644 --- a/arch/arm/dts/zynqmp-zcu102-revA.dts +++ b/arch/arm/dts/zynqmp-zcu102-revA.dts @@ -960,6 +960,7 @@ &pcie { status = "okay"; + phys = <&psgtr 0 PHY_TYPE_PCIE 0 0>; }; &psgtr { diff --git a/arch/arm/dts/zynqmp-zcu1275-revA.dts b/arch/arm/dts/zynqmp-zcu1275-revA.dts index 095c972f132..b75b2a796eb 100644 --- a/arch/arm/dts/zynqmp-zcu1275-revA.dts +++ b/arch/arm/dts/zynqmp-zcu1275-revA.dts @@ -15,8 +15,7 @@ / { model = "ZynqMP ZCU1275 RevA"; - compatible = "xlnx,zynqmp-zcu1275-revA", "xlnx,zynqmp-zcu1275", - "xlnx,zynqmp"; + compatible = "xlnx,zynqmp-zcu1275-revA", "xlnx,zynqmp-zcu1275", "xlnx,zynqmp"; aliases { serial0 = &uart0; diff --git a/arch/arm/dts/zynqmp.dtsi b/arch/arm/dts/zynqmp.dtsi index 6a29f610153..70ca5e6379f 100644 --- a/arch/arm/dts/zynqmp.dtsi +++ b/arch/arm/dts/zynqmp.dtsi @@ -168,8 +168,8 @@ bootph-all; }; - pmu: pmu { - compatible = "arm,armv8-pmuv3"; + pmu { + compatible = "arm,cortex-a53-pmu"; interrupt-parent = <&gic>; interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, @@ -441,6 +441,34 @@ }; }; + cpu0_debug: debug@fec10000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x0 0xfec10000 0x0 0x1000>; + clock-names = "apb_pclk"; + cpu = <&cpu0>; + }; + + cpu1_debug: debug@fed10000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x0 0xfed10000 0x0 0x1000>; + clock-names = "apb_pclk"; + cpu = <&cpu1>; + }; + + cpu2_debug: debug@fee10000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x0 0xfee10000 0x0 0x1000>; + clock-names = "apb_pclk"; + cpu = <&cpu2>; + }; + + cpu3_debug: debug@fef10000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x0 0xfef10000 0x0 0x1000>; + clock-names = "apb_pclk"; + cpu = <&cpu3>; + }; + /* GDMA */ fpd_dma_chan1: dma-controller@fd500000 { status = "disabled"; @@ -885,7 +913,6 @@ power-domains = <&zynqmp_firmware PD_SATA>; resets = <&zynqmp_reset ZYNQMP_RESET_SATA>; /* iommus = <&smmu 0x4c0>, <&smmu 0x4c1>, <&smmu 0x4c2>, <&smmu 0x4c3>; */ - /* dma-coherent; */ }; sdhci0: mmc@ff160000 { @@ -1065,9 +1092,9 @@ <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "ref"; /* iommus = <&smmu 0x860>; */ snps,quirk-frame-length-adjustment = <0x20>; - clock-names = "ref"; snps,resume-hs-terminations; /* dma-coherent; */ }; @@ -1097,9 +1124,9 @@ <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "ref"; /* iommus = <&smmu 0x861>; */ snps,quirk-frame-length-adjustment = <0x20>; - clock-names = "ref"; snps,resume-hs-terminations; /* dma-coherent; */ }; @@ -1176,11 +1203,14 @@ "dp_vtc_pixel_clk_in"; power-domains = <&zynqmp_firmware PD_DP>; resets = <&zynqmp_reset ZYNQMP_RESET_DP>; - dma-names = "vid0", "vid1", "vid2", "gfx0"; + dma-names = "vid0", "vid1", "vid2", "gfx0", + "aud0", "aud1"; dmas = <&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO0>, <&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO1>, <&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO2>, - <&zynqmp_dpdma ZYNQMP_DPDMA_GRAPHICS>; + <&zynqmp_dpdma ZYNQMP_DPDMA_GRAPHICS>, + <&zynqmp_dpdma ZYNQMP_DPDMA_AUDIO0>, + <&zynqmp_dpdma ZYNQMP_DPDMA_AUDIO1>; ports { #address-cells = <1>; diff --git a/arch/arm/include/asm/arch-imx/cpu.h b/arch/arm/include/asm/arch-imx/cpu.h index b0468a1a136..0d7a5734616 100644 --- a/arch/arm/include/asm/arch-imx/cpu.h +++ b/arch/arm/include/asm/arch-imx/cpu.h @@ -71,6 +71,11 @@ #define MXC_CPU_IMX9302 0xC9 /* dummy ID */ #define MXC_CPU_IMX9301 0xCA /* dummy ID */ +#define MXC_CPU_IMX91 0xCB /* dummy ID */ +#define MXC_CPU_IMX9121 0xCC /* dummy ID */ +#define MXC_CPU_IMX9111 0xCD /* dummy ID */ +#define MXC_CPU_IMX9101 0xCE /* dummy ID */ + #define MXC_SOC_MX6 0x60 #define MXC_SOC_MX7 0x70 #define MXC_SOC_IMX8M 0x80 diff --git a/arch/arm/include/asm/arch-imx8m/ddr.h b/arch/arm/include/asm/arch-imx8m/ddr.h index 1f81d91977c..5092ccae188 100644 --- a/arch/arm/include/asm/arch-imx8m/ddr.h +++ b/arch/arm/include/asm/arch-imx8m/ddr.h @@ -747,7 +747,4 @@ static inline void reg32setbit(unsigned long addr, u32 bit) #define dwc_ddrphy_apb_rd(addr) \ reg32_read(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + ddrphy_addr_remap(addr)) -extern struct dram_cfg_param ddrphy_trained_csr[]; -extern uint32_t ddrphy_trained_csr_num; - #endif diff --git a/arch/arm/include/asm/arch-imx9/clock.h b/arch/arm/include/asm/arch-imx9/clock.h index 76f12118592..60d48b13b11 100644 --- a/arch/arm/include/asm/arch-imx9/clock.h +++ b/arch/arm/include/asm/arch-imx9/clock.h @@ -205,10 +205,17 @@ struct clk_root_map { u32 mux_type; }; +enum clk_soc { + CLK_SOC_ALL = 0, + CLK_SOC_IMX93 = 1, + CLK_SOC_IMX91 = 2, +}; + struct imx_clk_setting { u32 clk_root; enum ccm_clk_src src; u32 div; + enum clk_soc soc; }; int clock_init_early(void); diff --git a/arch/arm/include/asm/arch-imx9/ddr.h b/arch/arm/include/asm/arch-imx9/ddr.h index 2b22f3a5bea..0dd2d62b9ef 100644 --- a/arch/arm/include/asm/arch-imx9/ddr.h +++ b/arch/arm/include/asm/arch-imx9/ddr.h @@ -141,7 +141,4 @@ static inline void reg32setbit(unsigned long addr, u32 bit) #define dwc_ddrphy_apb_rd(addr) \ reg32_read(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + ddrphy_addr_remap(addr)) -extern struct dram_cfg_param ddrphy_trained_csr[]; -extern u32 ddrphy_trained_csr_num; - #endif diff --git a/arch/arm/include/asm/arch-imx9/gpio.h b/arch/arm/include/asm/arch-imx9/gpio.h index 40732022e7e..ca763f56a1d 100644 --- a/arch/arm/include/asm/arch-imx9/gpio.h +++ b/arch/arm/include/asm/arch-imx9/gpio.h @@ -6,6 +6,8 @@ #ifndef __ASM_ARCH_IMX9_GPIO_H #define __ASM_ARCH_IMX9_GPIO_H +#include <linux/types.h> + struct gpio_regs { u32 gpio_pdor; u32 gpio_psor; diff --git a/arch/arm/include/asm/arch-imx9/imx91_pins.h b/arch/arm/include/asm/arch-imx9/imx91_pins.h new file mode 100644 index 00000000000..26246702a96 --- /dev/null +++ b/arch/arm/include/asm/arch-imx9/imx91_pins.h @@ -0,0 +1,770 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2024 NXP + */ + +#ifndef __ASM_ARCH_IMX91_PINS_H__ +#define __ASM_ARCH_IMX91_PINS_H__ + +#include <asm/mach-imx/iomux-v3.h> + +enum { + MX91_PAD_DAP_TDI__JTAG_MUX_TDI = IOMUX_PAD(0x01B0, 0x0000, 0x00, 0x03D8, 0x00, 0x00), + MX91_PAD_DAP_TDI__MQS2_LEFT = IOMUX_PAD(0x01B0, 0x0000, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_DAP_TDI__CAN2_TX = IOMUX_PAD(0x01B0, 0x0000, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_DAP_TDI__FLEXIO2_FLEXIO30 = IOMUX_PAD(0x01B0, 0x0000, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_DAP_TDI__GPIO3_IO28 = IOMUX_PAD(0x01B0, 0x0000, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_DAP_TDI__LPUART5_RX = IOMUX_PAD(0x01B0, 0x0000, 0x06, 0x0488, 0x00, 0x00), + + MX91_PAD_DAP_TMS_SWDIO__JTAG_MUX_TMS = IOMUX_PAD(0x01B4, 0x0004, 0x00, 0x03DC, 0x00, 0x00), + MX91_PAD_DAP_TMS_SWDIO__FLEXIO2_FLEXIO31 = IOMUX_PAD(0x01B4, 0x0004, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_DAP_TMS_SWDIO__GPIO3_IO29 = IOMUX_PAD(0x01B4, 0x0004, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B = IOMUX_PAD(0x01B4, 0x0004, 0x06, 0x0000, 0x00, 0x00), + + MX91_PAD_DAP_TCLK_SWCLK__JTAG_MUX_TCK = IOMUX_PAD(0x01B8, 0x0008, 0x00, 0x03D4, 0x00, 0x00), + MX91_PAD_DAP_TCLK_SWCLK__FLEXIO1_FLEXIO30 = IOMUX_PAD(0x01B8, 0x0008, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_DAP_TCLK_SWCLK__GPIO3_IO30 = IOMUX_PAD(0x01B8, 0x0008, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B = IOMUX_PAD(0x01B8, 0x0008, 0x06, 0x0484, 0x00, 0x00), + + MX91_PAD_DAP_TDO_TRACESWO__JTAG_MUX_TDO = IOMUX_PAD(0x01BC, 0x000C, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_DAP_TDO_TRACESWO__MQS2_RIGHT = IOMUX_PAD(0x01BC, 0x000C, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_DAP_TDO_TRACESWO__CAN2_RX = IOMUX_PAD(0x01BC, 0x000C, 0x03, 0x0364, 0x00, 0x00), + MX91_PAD_DAP_TDO_TRACESWO__FLEXIO1_FLEXIO31 = IOMUX_PAD(0x01BC, 0x000C, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_DAP_TDO_TRACESWO__GPIO3_IO31 = IOMUX_PAD(0x01BC, 0x000C, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_DAP_TDO_TRACESWO__LPUART5_TX = IOMUX_PAD(0x01BC, 0x000C, 0x06, 0x048C, 0x00, 0x00), + + MX91_PAD_GPIO_IO00__GPIO2_IO0 = IOMUX_PAD(0x01C0, 0x0010, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO00__LPI2C3_SDA = IOMUX_PAD(0x01C0, 0x0010, 0x01, 0x03F4, 0x00, 0x00), + MX91_PAD_GPIO_IO00__MEDIAMIX_CAM_CLK = IOMUX_PAD(0x01C0, 0x0010, 0x02, 0x04BC, 0x00, 0x00), + MX91_PAD_GPIO_IO00__MEDIAMIX_DISP_CLK = IOMUX_PAD(0x01C0, 0x0010, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO00__LPSPI6_PCS0 = IOMUX_PAD(0x01C0, 0x0010, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO00__LPUART5_TX = IOMUX_PAD(0x01C0, 0x0010, 0x05, 0x048C, 0x01, 0x00), + MX91_PAD_GPIO_IO00__LPI2C5_SDA = IOMUX_PAD(0x01C0, 0x0010, 0x06, 0x0404, 0x00, 0x00), + MX91_PAD_GPIO_IO00__FLEXIO1_FLEXIO0 = IOMUX_PAD(0x01C0, 0x0010, 0x07, 0x036C, 0x00, 0x00), + + MX91_PAD_GPIO_IO01__GPIO2_IO1 = IOMUX_PAD(0x01C4, 0x0014, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO01__LPI2C3_SCL = IOMUX_PAD(0x01C4, 0x0014, 0x01, 0x03F0, 0x00, 0x00), + MX91_PAD_GPIO_IO01__MEDIAMIX_CAM_DATA0 = IOMUX_PAD(0x01C4, 0x0014, 0x02, 0x0490, 0x00, 0x00), + MX91_PAD_GPIO_IO01__MEDIAMIX_DISP_DE = IOMUX_PAD(0x01C4, 0x0014, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO01__LPSPI6_SIN = IOMUX_PAD(0x01C4, 0x0014, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO01__LPUART5_RX = IOMUX_PAD(0x01C4, 0x0014, 0x05, 0x0488, 0x01, 0x00), + MX91_PAD_GPIO_IO01__LPI2C5_SCL = IOMUX_PAD(0x01C4, 0x0014, 0x06, 0x0400, 0x00, 0x00), + MX91_PAD_GPIO_IO01__FLEXIO1_FLEXIO1 = IOMUX_PAD(0x01C4, 0x0014, 0x07, 0x0370, 0x00, 0x00), + + MX91_PAD_GPIO_IO02__GPIO2_IO2 = IOMUX_PAD(0x01C8, 0x0018, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO02__LPI2C4_SDA = IOMUX_PAD(0x01C8, 0x0018, 0x01, 0x03FC, 0x00, 0x00), + MX91_PAD_GPIO_IO02__MEDIAMIX_CAM_VSYNC = IOMUX_PAD(0x01C8, 0x0018, 0x02, 0x04C0, 0x00, 0x00), + MX91_PAD_GPIO_IO02__MEDIAMIX_DISP_VSYNC = IOMUX_PAD(0x01C8, 0x0018, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO02__LPSPI6_SOUT = IOMUX_PAD(0x01C8, 0x0018, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO02__LPUART5_CTS_B = IOMUX_PAD(0x01C8, 0x0018, 0x05, 0x0484, 0x01, 0x00), + MX91_PAD_GPIO_IO02__LPI2C6_SDA = IOMUX_PAD(0x01C8, 0x0018, 0x06, 0x040C, 0x00, 0x00), + MX91_PAD_GPIO_IO02__FLEXIO1_FLEXIO2 = IOMUX_PAD(0x01C8, 0x0018, 0x07, 0x0374, 0x00, 0x00), + + MX91_PAD_GPIO_IO03__GPIO2_IO3 = IOMUX_PAD(0x01CC, 0x001C, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO03__LPI2C4_SCL = IOMUX_PAD(0x01CC, 0x001C, 0x01, 0x03F8, 0x00, 0x00), + MX91_PAD_GPIO_IO03__MEDIAMIX_CAM_HSYNC = IOMUX_PAD(0x01CC, 0x001C, 0x02, 0x04B8, 0x00, 0x00), + MX91_PAD_GPIO_IO03__MEDIAMIX_DISP_HSYNC = IOMUX_PAD(0x01CC, 0x001C, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO03__LPSPI6_SCK = IOMUX_PAD(0x01CC, 0x001C, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO03__LPUART5_RTS_B = IOMUX_PAD(0x01CC, 0x001C, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO03__LPI2C6_SCL = IOMUX_PAD(0x01CC, 0x001C, 0x06, 0x0408, 0x00, 0x00), + MX91_PAD_GPIO_IO03__FLEXIO1_FLEXIO3 = IOMUX_PAD(0x01CC, 0x001C, 0x07, 0x0378, 0x00, 0x00), + + MX91_PAD_GPIO_IO04__GPIO2_IO4 = IOMUX_PAD(0x01D0, 0x0020, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO04__TPM3_CH0 = IOMUX_PAD(0x01D0, 0x0020, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO04__PDM_CLK = IOMUX_PAD(0x01D0, 0x0020, 0x02, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO04__MEDIAMIX_DISP_DATA0 = IOMUX_PAD(0x01D0, 0x0020, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO04__LPSPI7_PCS0 = IOMUX_PAD(0x01D0, 0x0020, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO04__LPUART6_TX = IOMUX_PAD(0x01D0, 0x0020, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO04__LPI2C6_SDA = IOMUX_PAD(0x01D0, 0x0020, 0x06, 0x040C, 0x01, 0x00), + MX91_PAD_GPIO_IO04__FLEXIO1_FLEXIO4 = IOMUX_PAD(0x01D0, 0x0020, 0x07, 0x037C, 0x00, 0x00), + + MX91_PAD_GPIO_IO05__GPIO2_IO5 = IOMUX_PAD(0x01D4, 0x0024, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO05__TPM4_CH0 = IOMUX_PAD(0x01D4, 0x0024, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO05__PDM_BIT_STREAM0 = IOMUX_PAD(0x01D4, 0x0024, 0x02, 0x04C4, 0x00, 0x00), + MX91_PAD_GPIO_IO05__MEDIAMIX_DISP_DATA1 = IOMUX_PAD(0x01D4, 0x0024, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO05__LPSPI7_SIN = IOMUX_PAD(0x01D4, 0x0024, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO05__LPUART6_RX = IOMUX_PAD(0x01D4, 0x0024, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO05__LPI2C6_SCL = IOMUX_PAD(0x01D4, 0x0024, 0x06, 0x0408, 0x01, 0x00), + MX91_PAD_GPIO_IO05__FLEXIO1_FLEXIO5 = IOMUX_PAD(0x01D4, 0x0024, 0x07, 0x0380, 0x00, 0x00), + + MX91_PAD_GPIO_IO06__GPIO2_IO6 = IOMUX_PAD(0x01D8, 0x0028, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO06__TPM5_CH0 = IOMUX_PAD(0x01D8, 0x0028, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO06__PDM_BIT_STREAM1 = IOMUX_PAD(0x01D8, 0x0028, 0x02, 0x04C8, 0x00, 0x00), + MX91_PAD_GPIO_IO06__MEDIAMIX_DISP_DATA2 = IOMUX_PAD(0x01D8, 0x0028, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO06__LPSPI7_SOUT = IOMUX_PAD(0x01D8, 0x0028, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO06__LPUART6_CTS_B = IOMUX_PAD(0x01D8, 0x0028, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO06__LPI2C7_SDA = IOMUX_PAD(0x01D8, 0x0028, 0x06, 0x0414, 0x00, 0x00), + MX91_PAD_GPIO_IO06__FLEXIO1_FLEXIO6 = IOMUX_PAD(0x01D8, 0x0028, 0x07, 0x0384, 0x00, 0x00), + + MX91_PAD_GPIO_IO07__GPIO2_IO7 = IOMUX_PAD(0x01DC, 0x002C, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO07__LPSPI3_PCS1 = IOMUX_PAD(0x01DC, 0x002C, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO07__MEDIAMIX_CAM_DATA1 = IOMUX_PAD(0x01DC, 0x002C, 0x02, 0x0494, 0x00, 0x00), + MX91_PAD_GPIO_IO07__MEDIAMIX_DISP_DATA3 = IOMUX_PAD(0x01DC, 0x002C, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO07__LPSPI7_SCK = IOMUX_PAD(0x01DC, 0x002C, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO07__LPUART6_RTS_B = IOMUX_PAD(0x01DC, 0x002C, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO07__LPI2C7_SCL = IOMUX_PAD(0x01DC, 0x002C, 0x06, 0x0410, 0x00, 0x00), + MX91_PAD_GPIO_IO07__FLEXIO1_FLEXIO7 = IOMUX_PAD(0x01DC, 0x002C, 0x07, 0x0388, 0x00, 0x00), + + MX91_PAD_GPIO_IO08__GPIO2_IO8 = IOMUX_PAD(0x01E0, 0x0030, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO08__LPSPI3_PCS0 = IOMUX_PAD(0x01E0, 0x0030, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO08__MEDIAMIX_CAM_DATA2 = IOMUX_PAD(0x01E0, 0x0030, 0x02, 0x0498, 0x00, 0x00), + MX91_PAD_GPIO_IO08__MEDIAMIX_DISP_DATA4 = IOMUX_PAD(0x01E0, 0x0030, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO08__TPM6_CH0 = IOMUX_PAD(0x01E0, 0x0030, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO08__LPUART7_TX = IOMUX_PAD(0x01E0, 0x0030, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO08__LPI2C7_SDA = IOMUX_PAD(0x01E0, 0x0030, 0x06, 0x0414, 0x01, 0x00), + MX91_PAD_GPIO_IO08__FLEXIO1_FLEXIO8 = IOMUX_PAD(0x01E0, 0x0030, 0x07, 0x038C, 0x00, 0x00), + + MX91_PAD_GPIO_IO09__GPIO2_IO9 = IOMUX_PAD(0x01E4, 0x0034, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO09__LPSPI3_SIN = IOMUX_PAD(0x01E4, 0x0034, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO09__MEDIAMIX_CAM_DATA3 = IOMUX_PAD(0x01E4, 0x0034, 0x02, 0x049C, 0x00, 0x00), + MX91_PAD_GPIO_IO09__MEDIAMIX_DISP_DATA5 = IOMUX_PAD(0x01E4, 0x0034, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO09__TPM3_EXTCLK = IOMUX_PAD(0x01E4, 0x0034, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO09__LPUART7_RX = IOMUX_PAD(0x01E4, 0x0034, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO09__LPI2C7_SCL = IOMUX_PAD(0x01E4, 0x0034, 0x06, 0x0410, 0x01, 0x00), + MX91_PAD_GPIO_IO09__FLEXIO1_FLEXIO9 = IOMUX_PAD(0x01E4, 0x0034, 0x07, 0x0390, 0x00, 0x00), + + MX91_PAD_GPIO_IO10__GPIO2_IO10 = IOMUX_PAD(0x01E8, 0x0038, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO10__LPSPI3_SOUT = IOMUX_PAD(0x01E8, 0x0038, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO10__MEDIAMIX_CAM_DATA4 = IOMUX_PAD(0x01E8, 0x0038, 0x02, 0x04A0, 0x00, 0x00), + MX91_PAD_GPIO_IO10__MEDIAMIX_DISP_DATA6 = IOMUX_PAD(0x01E8, 0x0038, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO10__TPM4_EXTCLK = IOMUX_PAD(0x01E8, 0x0038, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO10__LPUART7_CTS_B = IOMUX_PAD(0x01E8, 0x0038, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO10__LPI2C8_SDA = IOMUX_PAD(0x01E8, 0x0038, 0x06, 0x041C, 0x00, 0x00), + MX91_PAD_GPIO_IO10__FLEXIO1_FLEXIO10 = IOMUX_PAD(0x01E8, 0x0038, 0x07, 0x0394, 0x00, 0x00), + + MX91_PAD_GPIO_IO11__GPIO2_IO11 = IOMUX_PAD(0x01EC, 0x003C, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO11__LPSPI3_SCK = IOMUX_PAD(0x01EC, 0x003C, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO11__MEDIAMIX_CAM_DATA5 = IOMUX_PAD(0x01EC, 0x003C, 0x02, 0x04A4, 0x00, 0x00), + MX91_PAD_GPIO_IO11__MEDIAMIX_DISP_DATA7 = IOMUX_PAD(0x01EC, 0x003C, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO11__TPM5_EXTCLK = IOMUX_PAD(0x01EC, 0x003C, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO11__LPUART7_RTS_B = IOMUX_PAD(0x01EC, 0x003C, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO11__LPI2C8_SCL = IOMUX_PAD(0x01EC, 0x003C, 0x06, 0x0418, 0x00, 0x00), + MX91_PAD_GPIO_IO11__FLEXIO1_FLEXIO11 = IOMUX_PAD(0x01EC, 0x003C, 0x07, 0x0398, 0x00, 0x00), + + MX91_PAD_GPIO_IO12__GPIO2_IO12 = IOMUX_PAD(0x01F0, 0x0040, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO12__TPM3_CH2 = IOMUX_PAD(0x01F0, 0x0040, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO12__PDM_BIT_STREAM2 = IOMUX_PAD(0x01F0, 0x0040, 0x02, 0x04CC, 0x00, 0x00), + MX91_PAD_GPIO_IO12__MEDIAMIX_DISP_DATA8 = IOMUX_PAD(0x01F0, 0x0040, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO12__LPSPI8_PCS0 = IOMUX_PAD(0x01F0, 0x0040, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO12__LPUART8_TX = IOMUX_PAD(0x01F0, 0x0040, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO12__LPI2C8_SDA = IOMUX_PAD(0x01F0, 0x0040, 0x06, 0x041C, 0x01, 0x00), + MX91_PAD_GPIO_IO12__SAI3_RX_SYNC = IOMUX_PAD(0x01F0, 0x0040, 0x07, 0x04DC, 0x00, 0x00), + + MX91_PAD_GPIO_IO13__GPIO2_IO13 = IOMUX_PAD(0x01F4, 0x0044, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO13__TPM4_CH2 = IOMUX_PAD(0x01F4, 0x0044, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO13__PDM_BIT_STREAM3 = IOMUX_PAD(0x01F4, 0x0044, 0x02, 0x04D0, 0x00, 0x00), + MX91_PAD_GPIO_IO13__MEDIAMIX_DISP_DATA9 = IOMUX_PAD(0x01F4, 0x0044, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO13__LPSPI8_SIN = IOMUX_PAD(0x01F4, 0x0044, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO13__LPUART8_RX = IOMUX_PAD(0x01F4, 0x0044, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO13__LPI2C8_SCL = IOMUX_PAD(0x01F4, 0x0044, 0x06, 0x0418, 0x01, 0x00), + MX91_PAD_GPIO_IO13__FLEXIO1_FLEXIO13 = IOMUX_PAD(0x01F4, 0x0044, 0x07, 0x039C, 0x00, 0x00), + + MX91_PAD_GPIO_IO14__GPIO2_IO14 = IOMUX_PAD(0x01F8, 0x0048, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO14__LPUART3_TX = IOMUX_PAD(0x01F8, 0x0048, 0x01, 0x0474, 0x00, 0x00), + MX91_PAD_GPIO_IO14__MEDIAMIX_CAM_DATA6 = IOMUX_PAD(0x01F8, 0x0048, 0x02, 0x04A8, 0x00, 0x00), + MX91_PAD_GPIO_IO14__MEDIAMIX_DISP_DATA10 = IOMUX_PAD(0x01F8, 0x0048, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO14__LPSPI8_SOUT = IOMUX_PAD(0x01F8, 0x0048, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO14__LPUART8_CTS_B = IOMUX_PAD(0x01F8, 0x0048, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO14__LPUART4_TX = IOMUX_PAD(0x01F8, 0x0048, 0x06, 0x0480, 0x00, 0x00), + MX91_PAD_GPIO_IO14__FLEXIO1_FLEXIO14 = IOMUX_PAD(0x01F8, 0x0048, 0x07, 0x03A0, 0x00, 0x00), + + MX91_PAD_GPIO_IO15__GPIO2_IO15 = IOMUX_PAD(0x01FC, 0x004C, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO15__LPUART3_RX = IOMUX_PAD(0x01FC, 0x004C, 0x01, 0x0470, 0x00, 0x00), + MX91_PAD_GPIO_IO15__MEDIAMIX_CAM_DATA7 = IOMUX_PAD(0x01FC, 0x004C, 0x02, 0x04AC, 0x00, 0x00), + MX91_PAD_GPIO_IO15__MEDIAMIX_DISP_DATA11 = IOMUX_PAD(0x01FC, 0x004C, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO15__LPSPI8_SCK = IOMUX_PAD(0x01FC, 0x004C, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO15__LPUART8_RTS_B = IOMUX_PAD(0x01FC, 0x004C, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO15__LPUART4_RX = IOMUX_PAD(0x01FC, 0x004C, 0x06, 0x047C, 0x00, 0x00), + MX91_PAD_GPIO_IO15__FLEXIO1_FLEXIO15 = IOMUX_PAD(0x01FC, 0x004C, 0x07, 0x03A4, 0x00, 0x00), + + MX91_PAD_GPIO_IO16__GPIO2_IO16 = IOMUX_PAD(0x0200, 0x0050, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO16__SAI3_TX_BCLK = IOMUX_PAD(0x0200, 0x0050, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO16__PDM_BIT_STREAM2 = IOMUX_PAD(0x0200, 0x0050, 0x02, 0x04CC, 0x01, 0x00), + MX91_PAD_GPIO_IO16__MEDIAMIX_DISP_DATA12 = IOMUX_PAD(0x0200, 0x0050, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO16__LPUART3_CTS_B = IOMUX_PAD(0x0200, 0x0050, 0x04, 0x046C, 0x00, 0x00), + MX91_PAD_GPIO_IO16__LPSPI4_PCS2 = IOMUX_PAD(0x0200, 0x0050, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO16__LPUART4_CTS_B = IOMUX_PAD(0x0200, 0x0050, 0x06, 0x0478, 0x00, 0x00), + MX91_PAD_GPIO_IO16__FLEXIO1_FLEXIO16 = IOMUX_PAD(0x0200, 0x0050, 0x07, 0x03A8, 0x00, 0x00), + + MX91_PAD_GPIO_IO17__GPIO2_IO17 = IOMUX_PAD(0x0204, 0x0054, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO17__SAI3_MCLK = IOMUX_PAD(0x0204, 0x0054, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO17__MEDIAMIX_CAM_DATA8 = IOMUX_PAD(0x0204, 0x0054, 0x02, 0x04B0, 0x00, 0x00), + MX91_PAD_GPIO_IO17__MEDIAMIX_DISP_DATA13 = IOMUX_PAD(0x0204, 0x0054, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO17__LPUART3_RTS_B = IOMUX_PAD(0x0204, 0x0054, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO17__LPSPI4_PCS1 = IOMUX_PAD(0x0204, 0x0054, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO17__LPUART4_RTS_B = IOMUX_PAD(0x0204, 0x0054, 0x06, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO17__FLEXIO1_FLEXIO17 = IOMUX_PAD(0x0204, 0x0054, 0x07, 0x03AC, 0x00, 0x00), + + MX91_PAD_GPIO_IO18__GPIO2_IO18 = IOMUX_PAD(0x0208, 0x0058, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO18__SAI3_RX_BCLK = IOMUX_PAD(0x0208, 0x0058, 0x01, 0x04D8, 0x00, 0x00), + MX91_PAD_GPIO_IO18__MEDIAMIX_CAM_DATA9 = IOMUX_PAD(0x0208, 0x0058, 0x02, 0x04B4, 0x00, 0x00), + MX91_PAD_GPIO_IO18__MEDIAMIX_DISP_DATA14 = IOMUX_PAD(0x0208, 0x0058, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO18__LPSPI5_PCS0 = IOMUX_PAD(0x0208, 0x0058, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO18__LPSPI4_PCS0 = IOMUX_PAD(0x0208, 0x0058, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO18__TPM5_CH2 = IOMUX_PAD(0x0208, 0x0058, 0x06, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO18__FLEXIO1_FLEXIO18 = IOMUX_PAD(0x0208, 0x0058, 0x07, 0x03B0, 0x00, 0x00), + + MX91_PAD_GPIO_IO19__GPIO2_IO19 = IOMUX_PAD(0x020C, 0x005C, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO19__SAI3_RX_SYNC = IOMUX_PAD(0x020C, 0x005C, 0x01, 0x04DC, 0x01, 0x00), + MX91_PAD_GPIO_IO19__PDM_BIT_STREAM3 = IOMUX_PAD(0x020C, 0x005C, 0x02, 0x04D0, 0x01, 0x00), + MX91_PAD_GPIO_IO19__MEDIAMIX_DISP_DATA15 = IOMUX_PAD(0x020C, 0x005C, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO19__LPSPI5_SIN = IOMUX_PAD(0x020C, 0x005C, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO19__LPSPI4_SIN = IOMUX_PAD(0x020C, 0x005C, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO19__TPM6_CH2 = IOMUX_PAD(0x020C, 0x005C, 0x06, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO19__SAI3_TX_DATA0 = IOMUX_PAD(0x020C, 0x005C, 0x07, 0x0000, 0x00, 0x00), + + MX91_PAD_GPIO_IO20__GPIO2_IO20 = IOMUX_PAD(0x0210, 0x0060, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO20__SAI3_RX_DATA0 = IOMUX_PAD(0x0210, 0x0060, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO20__PDM_BIT_STREAM0 = IOMUX_PAD(0x0210, 0x0060, 0x02, 0x04C4, 0x01, 0x00), + MX91_PAD_GPIO_IO20__MEDIAMIX_DISP_DATA16 = IOMUX_PAD(0x0210, 0x0060, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO20__LPSPI5_SOUT = IOMUX_PAD(0x0210, 0x0060, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO20__LPSPI4_SOUT = IOMUX_PAD(0x0210, 0x0060, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO20__TPM3_CH1 = IOMUX_PAD(0x0210, 0x0060, 0x06, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO20__FLEXIO1_FLEXIO20 = IOMUX_PAD(0x0210, 0x0060, 0x07, 0x03B4, 0x00, 0x00), + + MX91_PAD_GPIO_IO21__GPIO2_IO21 = IOMUX_PAD(0x0214, 0x0064, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO21__SAI3_TX_DATA0 = IOMUX_PAD(0x0214, 0x0064, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO21__PDM_CLK = IOMUX_PAD(0x0214, 0x0064, 0x02, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO21__MEDIAMIX_DISP_DATA17 = IOMUX_PAD(0x0214, 0x0064, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO21__LPSPI5_SCK = IOMUX_PAD(0x0214, 0x0064, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO21__LPSPI4_SCK = IOMUX_PAD(0x0214, 0x0064, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO21__TPM4_CH1 = IOMUX_PAD(0x0214, 0x0064, 0x06, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO21__SAI3_RX_BCLK = IOMUX_PAD(0x0214, 0x0064, 0x07, 0x04D8, 0x01, 0x00), + + MX91_PAD_GPIO_IO22__GPIO2_IO22 = IOMUX_PAD(0x0218, 0x0068, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO22__USDHC3_CLK = IOMUX_PAD(0x0218, 0x0068, 0x01, 0x04E8, 0x00, 0x00), + MX91_PAD_GPIO_IO22__SPDIF_IN = IOMUX_PAD(0x0218, 0x0068, 0x02, 0x04E4, 0x00, 0x00), + MX91_PAD_GPIO_IO22__MEDIAMIX_DISP_DATA18 = IOMUX_PAD(0x0218, 0x0068, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO22__TPM5_CH1 = IOMUX_PAD(0x0218, 0x0068, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO22__TPM6_EXTCLK = IOMUX_PAD(0x0218, 0x0068, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO22__LPI2C5_SDA = IOMUX_PAD(0x0218, 0x0068, 0x06, 0x0404, 0x01, 0x00), + MX91_PAD_GPIO_IO22__FLEXIO1_FLEXIO22 = IOMUX_PAD(0x0218, 0x0068, 0x07, 0x03B8, 0x00, 0x00), + + MX91_PAD_GPIO_IO23__GPIO2_IO23 = IOMUX_PAD(0x021C, 0x006C, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO23__USDHC3_CMD = IOMUX_PAD(0x021C, 0x006C, 0x01, 0x04EC, 0x00, 0x00), + MX91_PAD_GPIO_IO23__SPDIF_OUT = IOMUX_PAD(0x021C, 0x006C, 0x02, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO23__MEDIAMIX_DISP_DATA19 = IOMUX_PAD(0x021C, 0x006C, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO23__TPM6_CH1 = IOMUX_PAD(0x021C, 0x006C, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO23__LPI2C5_SCL = IOMUX_PAD(0x021C, 0x006C, 0x06, 0x0400, 0x01, 0x00), + MX91_PAD_GPIO_IO23__FLEXIO1_FLEXIO23 = IOMUX_PAD(0x021C, 0x006C, 0x07, 0x03BC, 0x00, 0x00), + + MX91_PAD_GPIO_IO24__GPIO2_IO24 = IOMUX_PAD(0x0220, 0x0070, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO24__USDHC3_DATA0 = IOMUX_PAD(0x0220, 0x0070, 0x01, 0x04F0, 0x00, 0x00), + MX91_PAD_GPIO_IO24__MEDIAMIX_DISP_DATA20 = IOMUX_PAD(0x0220, 0x0070, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO24__TPM3_CH3 = IOMUX_PAD(0x0220, 0x0070, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO24__JTAG_MUX_TDO = IOMUX_PAD(0x0220, 0x0070, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO24__LPSPI6_PCS1 = IOMUX_PAD(0x0220, 0x0070, 0x06, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO24__FLEXIO1_FLEXIO24 = IOMUX_PAD(0x0220, 0x0070, 0x07, 0x03C0, 0x00, 0x00), + + MX91_PAD_GPIO_IO25__GPIO2_IO25 = IOMUX_PAD(0x0224, 0x0074, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO25__USDHC3_DATA1 = IOMUX_PAD(0x0224, 0x0074, 0x01, 0x04F4, 0x00, 0x00), + MX91_PAD_GPIO_IO25__CAN2_TX = IOMUX_PAD(0x0224, 0x0074, 0x02, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO25__MEDIAMIX_DISP_DATA21 = IOMUX_PAD(0x0224, 0x0074, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO25__TPM4_CH3 = IOMUX_PAD(0x0224, 0x0074, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO25__JTAG_MUX_TCK = IOMUX_PAD(0x0224, 0x0074, 0x05, 0x03D4, 0x01, 0x00), + MX91_PAD_GPIO_IO25__LPSPI7_PCS1 = IOMUX_PAD(0x0224, 0x0074, 0x06, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO25__FLEXIO1_FLEXIO25 = IOMUX_PAD(0x0224, 0x0074, 0x07, 0x03C4, 0x00, 0x00), + + MX91_PAD_GPIO_IO26__GPIO2_IO26 = IOMUX_PAD(0x0228, 0x0078, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO26__USDHC3_DATA2 = IOMUX_PAD(0x0228, 0x0078, 0x01, 0x04F8, 0x00, 0x00), + MX91_PAD_GPIO_IO26__PDM_BIT_STREAM1 = IOMUX_PAD(0x0228, 0x0078, 0x02, 0x04C8, 0x01, 0x00), + MX91_PAD_GPIO_IO26__MEDIAMIX_DISP_DATA22 = IOMUX_PAD(0x0228, 0x0078, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO26__TPM5_CH3 = IOMUX_PAD(0x0228, 0x0078, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO26__JTAG_MUX_TDI = IOMUX_PAD(0x0228, 0x0078, 0x05, 0x03D8, 0x01, 0x00), + MX91_PAD_GPIO_IO26__LPSPI8_PCS1 = IOMUX_PAD(0x0228, 0x0078, 0x06, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO26__SAI3_TX_SYNC = IOMUX_PAD(0x0228, 0x0078, 0x07, 0x04E0, 0x00, 0x00), + + MX91_PAD_GPIO_IO27__GPIO2_IO27 = IOMUX_PAD(0x022C, 0x007C, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO27__USDHC3_DATA3 = IOMUX_PAD(0x022C, 0x007C, 0x01, 0x04FC, 0x00, 0x00), + MX91_PAD_GPIO_IO27__CAN2_RX = IOMUX_PAD(0x022C, 0x007C, 0x02, 0x0364, 0x01, 0x00), + MX91_PAD_GPIO_IO27__MEDIAMIX_DISP_DATA23 = IOMUX_PAD(0x022C, 0x007C, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO27__TPM6_CH3 = IOMUX_PAD(0x022C, 0x007C, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO27__JTAG_MUX_TMS = IOMUX_PAD(0x022C, 0x007C, 0x05, 0x03DC, 0x01, 0x00), + MX91_PAD_GPIO_IO27__LPSPI5_PCS1 = IOMUX_PAD(0x022C, 0x007C, 0x06, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO27__FLEXIO1_FLEXIO27 = IOMUX_PAD(0x022C, 0x007C, 0x07, 0x03C8, 0x00, 0x00), + + MX91_PAD_GPIO_IO28__GPIO2_IO28 = IOMUX_PAD(0x0230, 0x0080, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO28__LPI2C3_SDA = IOMUX_PAD(0x0230, 0x0080, 0x01, 0x03F4, 0x01, 0x00), + MX91_PAD_GPIO_IO28__CAN1_TX = IOMUX_PAD(0x0230, 0x0080, 0x02, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO28__FLEXIO1_FLEXIO28 = IOMUX_PAD(0x0230, 0x0080, 0x07, 0x0000, 0x00, 0x00), + + MX91_PAD_GPIO_IO29__GPIO2_IO29 = IOMUX_PAD(0x0234, 0x0084, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_GPIO_IO29__LPI2C3_SCL = IOMUX_PAD(0x0234, 0x0084, 0x01, 0x03F0, 0x01, 0x00), + MX91_PAD_GPIO_IO29__CAN1_RX = IOMUX_PAD(0x0234, 0x0084, 0x02, 0x0360, 0x00, 0x00), + MX91_PAD_GPIO_IO29__FLEXIO1_FLEXIO29 = IOMUX_PAD(0x0234, 0x0084, 0x07, 0x0000, 0x00, 0x00), + + MX91_PAD_CCM_CLKO1__CCMSRCGPCMIX_CLKO1 = IOMUX_PAD(0x0238, 0x0088, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_CCM_CLKO1__FLEXIO1_FLEXIO26 = IOMUX_PAD(0x0238, 0x0088, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_CCM_CLKO1__GPIO3_IO26 = IOMUX_PAD(0x0238, 0x0088, 0x05, 0x0000, 0x00, 0x00), + + MX91_PAD_CCM_CLKO2__GPIO3_IO27 = IOMUX_PAD(0x023C, 0x008C, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_CCM_CLKO2__CCMSRCGPCMIX_CLKO2 = IOMUX_PAD(0x023C, 0x008C, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_CCM_CLKO2__FLEXIO1_FLEXIO27 = IOMUX_PAD(0x023C, 0x008C, 0x04, 0x03C8, 0x01, 0x00), + + MX91_PAD_CCM_CLKO3__CCMSRCGPCMIX_CLKO3 = IOMUX_PAD(0x0240, 0x0090, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_CCM_CLKO3__FLEXIO2_FLEXIO28 = IOMUX_PAD(0x0240, 0x0090, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_CCM_CLKO3__GPIO4_IO28 = IOMUX_PAD(0x0240, 0x0090, 0x05, 0x0000, 0x00, 0x00), + + MX91_PAD_CCM_CLKO4__CCMSRCGPCMIX_CLKO4 = IOMUX_PAD(0x0244, 0x0094, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_CCM_CLKO4__FLEXIO2_FLEXIO29 = IOMUX_PAD(0x0244, 0x0094, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_CCM_CLKO4__GPIO4_IO29 = IOMUX_PAD(0x0244, 0x0094, 0x05, 0x0000, 0x00, 0x00), + + MX91_PAD_ENET1_MDC__ENET1_MDC = IOMUX_PAD(0x0248, 0x0098, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_MDC__LPUART3_DCB_B = IOMUX_PAD(0x0248, 0x0098, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_MDC__I3C2_SCL = IOMUX_PAD(0x0248, 0x0098, 0x02, 0x03CC, 0x00, 0x00), + MX91_PAD_ENET1_MDC__HSIOMIX_OTG_ID1 = IOMUX_PAD(0x0248, 0x0098, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_MDC__FLEXIO2_FLEXIO0 = IOMUX_PAD(0x0248, 0x0098, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_MDC__GPIO4_IO0 = IOMUX_PAD(0x0248, 0x0098, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_MDC__LPI2C1_SCL = IOMUX_PAD(0x0248, 0x0098, 0x06, 0x03E0, 0x00, 0x00), + + MX91_PAD_ENET1_MDIO__ENET_QOS_MDIO = IOMUX_PAD(0x024C, 0x009C, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_MDIO__LPUART3_RIN_B = IOMUX_PAD(0x024C, 0x009C, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_MDIO__I3C2_SDA = IOMUX_PAD(0x024C, 0x009C, 0x02, 0x03D0, 0x00, 0x00), + MX91_PAD_ENET1_MDIO__HSIOMIX_OTG_PWR1 = IOMUX_PAD(0x024C, 0x009C, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_MDIO__FLEXIO2_FLEXIO1 = IOMUX_PAD(0x024C, 0x009C, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_MDIO__GPIO4_IO1 = IOMUX_PAD(0x024C, 0x009C, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_MDIO__LPI2C1_SDA = IOMUX_PAD(0x024C, 0x009C, 0x06, 0x03E4, 0x00, 0x00), + + MX91_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 = IOMUX_PAD(0x0250, 0x00A0, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_TD3__CAN2_TX = IOMUX_PAD(0x0250, 0x00A0, 0x02, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_TD3__HSIOMIX_OTG_ID2 = IOMUX_PAD(0x0250, 0x00A0, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_TD3__FLEXIO2_FLEXIO2 = IOMUX_PAD(0x0250, 0x00A0, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_TD3__GPIO4_IO3 = IOMUX_PAD(0x0250, 0x00A0, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_TD3__LPI2C2_SCL = IOMUX_PAD(0x0250, 0x00A0, 0x06, 0x03E8, 0x00, 0x00), + + MX91_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 = IOMUX_PAD(0x0254, 0x00A4, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_TD2__ENET_QOS_CLOCK_GENERATE_CLK = IOMUX_PAD(0x0254, 0x00A4, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_TD2__CAN2_RX = IOMUX_PAD(0x0254, 0x00A4, 0x02, 0x0364, 0x02, 0x00), + MX91_PAD_ENET1_TD2__HSIOMIX_OTG_OC2 = IOMUX_PAD(0x0254, 0x00A4, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_TD2__FLEXIO2_FLEXIO3 = IOMUX_PAD(0x0254, 0x00A4, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_TD2__GPIO4_IO3 = IOMUX_PAD(0x0254, 0x00A4, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_TD2__LPI2C2_SDA = IOMUX_PAD(0x0254, 0x00A4, 0x06, 0x03EC, 0x00, 0x00), + + MX91_PAD_ENET1_TD1__ENET1_RGMII_TD1 = IOMUX_PAD(0x0258, 0x00A8, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_TD1__LPUART3_RTS_B = IOMUX_PAD(0x0258, 0x00A8, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_TD1__I3C2_PUR = IOMUX_PAD(0x0258, 0x00A8, 0x02, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_TD1__HSIOMIX_OTG_OC1 = IOMUX_PAD(0x0258, 0x00A8, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_TD1__FLEXIO2_FLEXIO4 = IOMUX_PAD(0x0258, 0x00A8, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_TD1__GPIO4_IO4 = IOMUX_PAD(0x0258, 0x00A8, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_TD1__I3C2_PUR_B = IOMUX_PAD(0x0258, 0x00A8, 0x06, 0x0000, 0x00, 0x00), + + MX91_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 = IOMUX_PAD(0x025C, 0x00AC, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_TD0__LPUART3_TX = IOMUX_PAD(0x025C, 0x00AC, 0x01, 0x0474, 0x01, 0x00), + MX91_PAD_ENET1_TD0__FLEXIO2_FLEXIO5 = IOMUX_PAD(0x025C, 0x00AC, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_TD0__GPIO4_IO5 = IOMUX_PAD(0x025C, 0x00AC, 0x05, 0x0000, 0x00, 0x00), + + MX91_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL = IOMUX_PAD(0x0260, 0x00B0, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_TX_CTL__LPUART3_DTR_B = IOMUX_PAD(0x0260, 0x00B0, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_TX_CTL__FLEXIO2_FLEXIO6 = IOMUX_PAD(0x0260, 0x00B0, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_TX_CTL__GPIO4_IO6 = IOMUX_PAD(0x0260, 0x00B0, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_TX_CTL__LPSPI2_SCK = IOMUX_PAD(0x0260, 0x00B0, 0x02, 0x043C, 0x00, 0x00), + + MX91_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK = IOMUX_PAD(0x0264, 0x00B4, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_TXC__ENET_QOS_TX_ER = IOMUX_PAD(0x0264, 0x00B4, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_TXC__FLEXIO2_FLEXIO7 = IOMUX_PAD(0x0264, 0x00B4, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_TXC__GPIO4_IO7 = IOMUX_PAD(0x0264, 0x00B4, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_TXC__LPSPI2_SIN = IOMUX_PAD(0x0264, 0x00B4, 0x02, 0x0440, 0x00, 0x00), + + MX91_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL = IOMUX_PAD(0x0268, 0x00B8, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_RX_CTL__LPUART3_DSR_B = IOMUX_PAD(0x0268, 0x00B8, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_RX_CTL__HSIOMIX_OTG_PWR2 = IOMUX_PAD(0x0268, 0x00B8, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_RX_CTL__FLEXIO2_FLEXIO8 = IOMUX_PAD(0x0268, 0x00B8, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_RX_CTL__GPIO4_IO8 = IOMUX_PAD(0x0268, 0x00B8, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_RX_CTL__LPSPI2_PCS0 = IOMUX_PAD(0x0268, 0x00B8, 0x02, 0x0434, 0x00, 0x00), + + MX91_PAD_ENET1_RXC__ENET_QOS_RGMII_RXC = IOMUX_PAD(0x026C, 0x00BC, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_RXC__ENET_QOS_RX_ER = IOMUX_PAD(0x026C, 0x00BC, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_RXC__FLEXIO2_FLEXIO9 = IOMUX_PAD(0x026C, 0x00BC, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_RXC__GPIO4_IO9 = IOMUX_PAD(0x026C, 0x00BC, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_RXC__LPSPI2_SOUT = IOMUX_PAD(0x026C, 0x00BC, 0x02, 0x0444, 0x00, 0x00), + + MX91_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 = IOMUX_PAD(0x0270, 0x00C0, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_RD0__LPUART3_RX = IOMUX_PAD(0x0270, 0x00C0, 0x01, 0x0470, 0x01, 0x00), + MX91_PAD_ENET1_RD0__FLEXIO2_FLEXIO10 = IOMUX_PAD(0x0270, 0x00C0, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_RD0__GPIO4_IO10 = IOMUX_PAD(0x0270, 0x00C0, 0x05, 0x0000, 0x00, 0x00), + + MX91_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 = IOMUX_PAD(0x0274, 0x00C4, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_RD1__LPUART3_CTS_B = IOMUX_PAD(0x0274, 0x00C4, 0x01, 0x046C, 0x01, 0x00), + MX91_PAD_ENET1_RD1__LPTMR2_ALT1 = IOMUX_PAD(0x0274, 0x00C4, 0x03, 0x0448, 0x00, 0x00), + MX91_PAD_ENET1_RD1__FLEXIO2_FLEXIO11 = IOMUX_PAD(0x0274, 0x00C4, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_RD1__GPIO4_IO11 = IOMUX_PAD(0x0274, 0x00C4, 0x05, 0x0000, 0x00, 0x00), + + MX91_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 = IOMUX_PAD(0x0278, 0x00C8, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_RD2__LPTMR2_ALT2 = IOMUX_PAD(0x0278, 0x00C8, 0x03, 0x044C, 0x00, 0x00), + MX91_PAD_ENET1_RD2__FLEXIO2_FLEXIO12 = IOMUX_PAD(0x0278, 0x00C8, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_RD2__GPIO4_IO12 = IOMUX_PAD(0x0278, 0x00C8, 0x05, 0x0000, 0x00, 0x00), + + MX91_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 = IOMUX_PAD(0x027C, 0x00CC, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_RD3__FLEXSPI1_TESTER_TRIGGER = IOMUX_PAD(0x027C, 0x00CC, 0x02, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_RD3__LPTMR2_ALT3 = IOMUX_PAD(0x027C, 0x00CC, 0x03, 0x0450, 0x00, 0x00), + MX91_PAD_ENET1_RD3__FLEXIO2_FLEXIO13 = IOMUX_PAD(0x027C, 0x00CC, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_ENET1_RD3__GPIO4_IO13 = IOMUX_PAD(0x027C, 0x00CC, 0x05, 0x0000, 0x00, 0x00), + + MX91_PAD_ENET2_MDC__ENET2_MDC = IOMUX_PAD(0x0280, 0x00D0, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_MDC__LPUART4_DCB_B = IOMUX_PAD(0x0280, 0x00D0, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_MDC__SAI2_RX_SYNC = IOMUX_PAD(0x0280, 0x00D0, 0x02, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_MDC__FLEXIO2_FLEXIO14 = IOMUX_PAD(0x0280, 0x00D0, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_MDC__GPIO4_IO14 = IOMUX_PAD(0x0280, 0x00D0, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_MDC__MEDIAMIX_CAM_CLK = IOMUX_PAD(0x0280, 0x00D0, 0x06, 0x04BC, 0x01, 0x00), + + MX91_PAD_ENET2_MDIO__ENET2_MDIO = IOMUX_PAD(0x0284, 0x00D4, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_MDIO__LPUART4_RIN_B = IOMUX_PAD(0x0284, 0x00D4, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_MDIO__SAI2_RX_BCLK = IOMUX_PAD(0x0284, 0x00D4, 0x02, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_MDIO__FLEXIO2_FLEXIO15 = IOMUX_PAD(0x0284, 0x00D4, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_MDIO__GPIO4_IO15 = IOMUX_PAD(0x0284, 0x00D4, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_MDIO__MEDIAMIX_CAM_DATA0 = IOMUX_PAD(0x0284, 0x00D4, 0x06, 0x0490, 0x01, 0x00), + + MX91_PAD_ENET2_TD3__SAI2_RX_DATA0 = IOMUX_PAD(0x0288, 0x00D8, 0x02, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_TD3__FLEXIO2_FLEXIO16 = IOMUX_PAD(0x0288, 0x00D8, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_TD3__GPIO4_IO16 = IOMUX_PAD(0x0288, 0x00D8, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_TD3__MEDIAMIX_CAM_VSYNC = IOMUX_PAD(0x0288, 0x00D8, 0x06, 0x04C0, 0x01, 0x00), + MX91_PAD_ENET2_TD3__ENET2_RGMII_TD3 = IOMUX_PAD(0x0288, 0x00D8, 0x00, 0x0000, 0x00, 0x00), + + MX91_PAD_ENET2_TD2__ENET2_RGMII_TD2 = IOMUX_PAD(0x028C, 0x00DC, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_TD2__ENET2_TX_CLK2 = IOMUX_PAD(0x028C, 0x00DC, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_TD2__FLEXIO2_FLEXIO17 = IOMUX_PAD(0x028C, 0x00DC, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_TD2__GPIO4_IO17 = IOMUX_PAD(0x028C, 0x00DC, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_TD2__MEDIAMIX_CAM_HSYNC = IOMUX_PAD(0x028C, 0x00DC, 0x06, 0x04B8, 0x01, 0x00), + + MX91_PAD_ENET2_TD1__ENET2_RGMII_TD1 = IOMUX_PAD(0x0290, 0x00E0, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_TD1__LPUART4_RTS_B = IOMUX_PAD(0x0290, 0x00E0, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_TD1__FLEXIO2_FLEXIO18 = IOMUX_PAD(0x0290, 0x00E0, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_TD1__GPIO4_IO18 = IOMUX_PAD(0x0290, 0x00E0, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_TD1__MEDIAMIX_CAM_DATA1 = IOMUX_PAD(0x0290, 0x00E0, 0x06, 0x0494, 0x01, 0x00), + + MX91_PAD_ENET2_TD0__ENET2_RGMII_TD0 = IOMUX_PAD(0x0294, 0x00E4, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_TD0__LPUART4_TX = IOMUX_PAD(0x0294, 0x00E4, 0x01, 0x0480, 0x01, 0x00), + MX91_PAD_ENET2_TD0__FLEXIO2_FLEXIO19 = IOMUX_PAD(0x0294, 0x00E4, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_TD0__GPIO4_IO19 = IOMUX_PAD(0x0294, 0x00E4, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_TD0__MEDIAMIX_CAM_DATA2 = IOMUX_PAD(0x0294, 0x00E4, 0x06, 0x0498, 0x01, 0x00), + + MX91_PAD_ENET2_TX_CTL__ENET2_RGMII_TX_CTL = IOMUX_PAD(0x0298, 0x00E8, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_TX_CTL__LPUART4_DTR_B = IOMUX_PAD(0x0298, 0x00E8, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_TX_CTL__SAI2_TX_SYNC = IOMUX_PAD(0x0298, 0x00E8, 0x02, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_TX_CTL__FLEXIO2_FLEXIO20 = IOMUX_PAD(0x0298, 0x00E8, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_TX_CTL__GPIO4_IO20 = IOMUX_PAD(0x0298, 0x00E8, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_TX_CTL__MEDIAMIX_CAM_DATA3 = IOMUX_PAD(0x0298, 0x00E8, 0x06, 0x049C, 0x01, 0x00), + + MX91_PAD_ENET2_TXC__ENET2_RGMII_TXC = IOMUX_PAD(0x029C, 0x00EC, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_TXC__ENET2_TX_ER = IOMUX_PAD(0x029C, 0x00EC, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_TXC__SAI2_TX_BCLK = IOMUX_PAD(0x029C, 0x00EC, 0x02, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_TXC__FLEXIO2_FLEXIO21 = IOMUX_PAD(0x029C, 0x00EC, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_TXC__GPIO4_IO21 = IOMUX_PAD(0x029C, 0x00EC, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_TXC__MEDIAMIX_CAM_DATA4 = IOMUX_PAD(0x029C, 0x00EC, 0x06, 0x04A0, 0x01, 0x00), + + MX91_PAD_ENET2_RX_CTL__ENET2_RGMII_RX_CTL = IOMUX_PAD(0x02A0, 0x00F0, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_RX_CTL__LPUART4_DSR_B = IOMUX_PAD(0x02A0, 0x00F0, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_RX_CTL__SAI2_TX_DATA0 = IOMUX_PAD(0x02A0, 0x00F0, 0x02, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_RX_CTL__FLEXIO2_FLEXIO22 = IOMUX_PAD(0x02A0, 0x00F0, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_RX_CTL__GPIO4_IO22 = IOMUX_PAD(0x02A0, 0x00F0, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_RX_CTL__MEDIAMIX_CAM_DATA5 = IOMUX_PAD(0x02A0, 0x00F0, 0x06, 0x04A4, 0x01, 0x00), + + MX91_PAD_ENET2_RXC__ENET2_RGMII_RXC = IOMUX_PAD(0x02A4, 0x00F4, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_RXC__ENET2_RX_ER = IOMUX_PAD(0x02A4, 0x00F4, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_RXC__FLEXIO2_FLEXIO23 = IOMUX_PAD(0x02A4, 0x00F4, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_RXC__GPIO4_IO23 = IOMUX_PAD(0x02A4, 0x00F4, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_RXC__MEDIAMIX_CAM_DATA6 = IOMUX_PAD(0x02A4, 0x00F4, 0x06, 0x04A8, 0x01, 0x00), + + MX91_PAD_ENET2_RD0__ENET2_RGMII_RD0 = IOMUX_PAD(0x02A8, 0x00F8, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_RD0__LPUART4_RX = IOMUX_PAD(0x02A8, 0x00F8, 0x01, 0x047C, 0x01, 0x00), + MX91_PAD_ENET2_RD0__FLEXIO2_FLEXIO24 = IOMUX_PAD(0x02A8, 0x00F8, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_RD0__GPIO4_IO24 = IOMUX_PAD(0x02A8, 0x00F8, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_RD0__MEDIAMIX_CAM_DATA7 = IOMUX_PAD(0x02A8, 0x00F8, 0x06, 0x04AC, 0x01, 0x00), + + MX91_PAD_ENET2_RD1__ENET2_RGMII_RD1 = IOMUX_PAD(0x02AC, 0x00FC, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_RD1__SPDIF_IN = IOMUX_PAD(0x02AC, 0x00FC, 0x01, 0x04E4, 0x01, 0x00), + MX91_PAD_ENET2_RD1__FLEXIO2_FLEXIO25 = IOMUX_PAD(0x02AC, 0x00FC, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_RD1__GPIO4_IO25 = IOMUX_PAD(0x02AC, 0x00FC, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_RD1__MEDIAMIX_CAM_DATA8 = IOMUX_PAD(0x02AC, 0x00FC, 0x06, 0x04B0, 0x01, 0x00), + + MX91_PAD_ENET2_RD2__ENET2_RGMII_RD2 = IOMUX_PAD(0x02B0, 0x0100, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_RD2__LPUART4_CTS_B = IOMUX_PAD(0x02B0, 0x0100, 0x01, 0x0478, 0x01, 0x00), + MX91_PAD_ENET2_RD2__SAI2_MCLK = IOMUX_PAD(0x02B0, 0x0100, 0x02, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_RD2__MQS2_RIGHT = IOMUX_PAD(0x02B0, 0x0100, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_RD2__FLEXIO2_FLEXIO26 = IOMUX_PAD(0x02B0, 0x0100, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_RD2__GPIO4_IO26 = IOMUX_PAD(0x02B0, 0x0100, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_RD2__MEDIAMIX_CAM_DATA9 = IOMUX_PAD(0x02B0, 0x0100, 0x06, 0x04B4, 0x01, 0x00), + + MX91_PAD_ENET2_RD3__ENET2_RGMII_RD3 = IOMUX_PAD(0x02B4, 0x0104, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_RD3__SPDIF_OUT = IOMUX_PAD(0x02B4, 0x0104, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_RD3__SPDIF_IN = IOMUX_PAD(0x02B4, 0x0104, 0x02, 0x04E4, 0x02, 0x00), + MX91_PAD_ENET2_RD3__MQS2_LEFT = IOMUX_PAD(0x02B4, 0x0104, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_RD3__FLEXIO2_FLEXIO27 = IOMUX_PAD(0x02B4, 0x0104, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_ENET2_RD3__GPIO4_IO27 = IOMUX_PAD(0x02B4, 0x0104, 0x05, 0x0000, 0x00, 0x00), + + MX91_PAD_SD1_CLK__FLEXIO1_FLEXIO8 = IOMUX_PAD(0x02B8, 0x0108, 0x04, 0x038C, 0x01, 0x00), + MX91_PAD_SD1_CLK__GPIO3_IO8 = IOMUX_PAD(0x02B8, 0x0108, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_SD1_CLK__USDHC1_CLK = IOMUX_PAD(0x02B8, 0x0108, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_SD1_CLK__LPSPI2_SCK = IOMUX_PAD(0x02B8, 0x0108, 0x03, 0x043C, 0x01, 0x00), + + MX91_PAD_SD1_CMD__USDHC1_CMD = IOMUX_PAD(0x02BC, 0x010C, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_SD1_CMD__FLEXIO1_FLEXIO9 = IOMUX_PAD(0x02BC, 0x010C, 0x04, 0x0390, 0x01, 0x00), + MX91_PAD_SD1_CMD__GPIO3_IO9 = IOMUX_PAD(0x02BC, 0x010C, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_SD1_CMD__LPSPI2_SIN = IOMUX_PAD(0x02BC, 0x010C, 0x03, 0x0440, 0x01, 0x00), + + MX91_PAD_SD1_DATA0__USDHC1_DATA0 = IOMUX_PAD(0x02C0, 0x0110, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_SD1_DATA0__FLEXIO1_FLEXIO10 = IOMUX_PAD(0x02C0, 0x0110, 0x04, 0x0394, 0x01, 0x00), + MX91_PAD_SD1_DATA0__GPIO3_IO10 = IOMUX_PAD(0x02C0, 0x0110, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_SD1_DATA0__LPSPI2_PCS0 = IOMUX_PAD(0x02C0, 0x0110, 0x03, 0x0434, 0x01, 0x00), + + MX91_PAD_SD1_DATA1__USDHC1_DATA1 = IOMUX_PAD(0x02C4, 0x0114, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_SD1_DATA1__FLEXIO1_FLEXIO11 = IOMUX_PAD(0x02C4, 0x0114, 0x04, 0x0398, 0x01, 0x00), + MX91_PAD_SD1_DATA1__GPIO3_IO11 = IOMUX_PAD(0x02C4, 0x0114, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_SD1_DATA1__CCMSRCGPCMIX_INT_BOOT = IOMUX_PAD(0x02C4, 0x0114, 0x06, 0x0000, 0x00, 0x00), + MX91_PAD_SD1_DATA1__LPSPI2_SOUT = IOMUX_PAD(0x02C4, 0x0114, 0x03, 0x0444, 0x01, 0x00), + + MX91_PAD_SD1_DATA2__USDHC1_DATA2 = IOMUX_PAD(0x02C8, 0x0118, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_SD1_DATA2__FLEXIO1_FLEXIO12 = IOMUX_PAD(0x02C8, 0x0118, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_SD1_DATA2__GPIO3_IO12 = IOMUX_PAD(0x02C8, 0x0118, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_SD1_DATA2__CCMSRCGPCMIX_PMIC_READY = IOMUX_PAD(0x02C8, 0x0118, 0x06, 0x0000, 0x00, 0x00), + MX91_PAD_SD1_DATA2__LPSPI2_PCS1 = IOMUX_PAD(0x02C8, 0x0118, 0x03, 0x0438, 0x00, 0x00), + + MX91_PAD_SD1_DATA3__USDHC1_DATA3 = IOMUX_PAD(0x02CC, 0x011C, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_SD1_DATA3__FLEXSPI1_A_SS1_B = IOMUX_PAD(0x02CC, 0x011C, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_SD1_DATA3__FLEXIO1_FLEXIO13 = IOMUX_PAD(0x02CC, 0x011C, 0x04, 0x039C, 0x01, 0x00), + MX91_PAD_SD1_DATA3__GPIO3_IO13 = IOMUX_PAD(0x02CC, 0x011C, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_SD1_DATA3__LPSPI1_PCS1 = IOMUX_PAD(0x02CC, 0x011C, 0x03, 0x0424, 0x00, 0x00), + + MX91_PAD_SD1_DATA4__USDHC1_DATA4 = IOMUX_PAD(0x02D0, 0x0120, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_SD1_DATA4__FLEXSPI1_A_DATA4 = IOMUX_PAD(0x02D0, 0x0120, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_SD1_DATA4__FLEXIO1_FLEXIO14 = IOMUX_PAD(0x02D0, 0x0120, 0x04, 0x03A0, 0x01, 0x00), + MX91_PAD_SD1_DATA4__GPIO3_IO14 = IOMUX_PAD(0x02D0, 0x0120, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_SD1_DATA4__LPSPI1_PCS0 = IOMUX_PAD(0x02D0, 0x0120, 0x03, 0x0420, 0x00, 0x00), + + MX91_PAD_SD1_DATA5__USDHC1_DATA5 = IOMUX_PAD(0x02D4, 0x0124, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_SD1_DATA5__FLEXSPI1_A_DATA5 = IOMUX_PAD(0x02D4, 0x0124, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_SD1_DATA5__USDHC1_RESET_B = IOMUX_PAD(0x02D4, 0x0124, 0x02, 0x0000, 0x00, 0x00), + MX91_PAD_SD1_DATA5__FLEXIO1_FLEXIO15 = IOMUX_PAD(0x02D4, 0x0124, 0x04, 0x03A4, 0x01, 0x00), + MX91_PAD_SD1_DATA5__GPIO3_IO15 = IOMUX_PAD(0x02D4, 0x0124, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_SD1_DATA5__LPSPI1_SIN = IOMUX_PAD(0x02D4, 0x0124, 0x03, 0x042C, 0x00, 0x00), + + MX91_PAD_SD1_DATA6__USDHC1_DATA6 = IOMUX_PAD(0x02D8, 0x0128, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_SD1_DATA6__FLEXSPI1_A_DATA6 = IOMUX_PAD(0x02D8, 0x0128, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_SD1_DATA6__USDHC1_CD_B = IOMUX_PAD(0x02D8, 0x0128, 0x02, 0x0000, 0x00, 0x00), + MX91_PAD_SD1_DATA6__FLEXIO1_FLEXIO16 = IOMUX_PAD(0x02D8, 0x0128, 0x04, 0x03A8, 0x01, 0x00), + MX91_PAD_SD1_DATA6__GPIO3_IO16 = IOMUX_PAD(0x02D8, 0x0128, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_SD1_DATA6__LPSPI1_SCK = IOMUX_PAD(0x02D8, 0x0128, 0x03, 0x0428, 0x00, 0x00), + + MX91_PAD_SD1_DATA7__USDHC1_DATA7 = IOMUX_PAD(0x02DC, 0x012C, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_SD1_DATA7__FLEXSPI1_A_DATA7 = IOMUX_PAD(0x02DC, 0x012C, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_SD1_DATA7__USDHC1_WP = IOMUX_PAD(0x02DC, 0x012C, 0x02, 0x0000, 0x00, 0x00), + MX91_PAD_SD1_DATA7__FLEXIO1_FLEXIO17 = IOMUX_PAD(0x02DC, 0x012C, 0x04, 0x03AC, 0x01, 0x00), + MX91_PAD_SD1_DATA7__GPIO3_IO17 = IOMUX_PAD(0x02DC, 0x012C, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_SD1_DATA7__LPSPI1_SOUT = IOMUX_PAD(0x02DC, 0x012C, 0x03, 0x0430, 0x00, 0x00), + + MX91_PAD_SD1_STROBE__USDHC1_STROBE = IOMUX_PAD(0x02E0, 0x0130, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_SD1_STROBE__FLEXSPI1_A_DQS = IOMUX_PAD(0x02E0, 0x0130, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_SD1_STROBE__FLEXIO1_FLEXIO18 = IOMUX_PAD(0x02E0, 0x0130, 0x04, 0x03B0, 0x01, 0x00), + MX91_PAD_SD1_STROBE__GPIO3_IO18 = IOMUX_PAD(0x02E0, 0x0130, 0x05, 0x0000, 0x00, 0x00), + + MX91_PAD_SD2_VSELECT__USDHC2_VSELECT = IOMUX_PAD(0x02E4, 0x0134, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_SD2_VSELECT__USDHC2_WP = IOMUX_PAD(0x02E4, 0x0134, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_SD2_VSELECT__LPTMR2_ALT3 = IOMUX_PAD(0x02E4, 0x0134, 0x02, 0x0450, 0x01, 0x00), + MX91_PAD_SD2_VSELECT__FLEXIO1_FLEXIO19 = IOMUX_PAD(0x02E4, 0x0134, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_SD2_VSELECT__GPIO3_IO19 = IOMUX_PAD(0x02E4, 0x0134, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_SD2_VSELECT__CCMSRCGPCMIX_EXT_CLK1 = IOMUX_PAD(0x02E4, 0x0134, 0x06, 0x0368, 0x00, 0x00), + + MX91_PAD_SD3_CLK__USDHC3_CLK = IOMUX_PAD(0x02E8, 0x0138, 0x00, 0x04E8, 0x01, 0x00), + MX91_PAD_SD3_CLK__FLEXSPI1_A_SCLK = IOMUX_PAD(0x02E8, 0x0138, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_SD3_CLK__LPUART1_CTS_B = IOMUX_PAD(0x02E8, 0x0138, 0x02, 0x0454, 0x00, 0x00), + MX91_PAD_SD3_CLK__FLEXIO1_FLEXIO20 = IOMUX_PAD(0x02E8, 0x0138, 0x04, 0x03B4, 0x01, 0x00), + MX91_PAD_SD3_CLK__GPIO3_IO20 = IOMUX_PAD(0x02E8, 0x0138, 0x05, 0x0000, 0x00, 0x00), + + MX91_PAD_SD3_CMD__USDHC3_CMD = IOMUX_PAD(0x02EC, 0x013C, 0x00, 0x04EC, 0x01, 0x00), + MX91_PAD_SD3_CMD__FLEXSPI1_A_SS0_B = IOMUX_PAD(0x02EC, 0x013C, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_SD3_CMD__LPUART1_RTS_B = IOMUX_PAD(0x02EC, 0x013C, 0x02, 0x0000, 0x00, 0x00), + MX91_PAD_SD3_CMD__FLEXIO1_FLEXIO21 = IOMUX_PAD(0x02EC, 0x013C, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_SD3_CMD__GPIO3_IO21 = IOMUX_PAD(0x02EC, 0x013C, 0x05, 0x0000, 0x00, 0x00), + + MX91_PAD_SD3_DATA0__USDHC3_DATA0 = IOMUX_PAD(0x02F0, 0x0140, 0x00, 0x04F0, 0x01, 0x00), + MX91_PAD_SD3_DATA0__FLEXSPI1_A_DATA0 = IOMUX_PAD(0x02F0, 0x0140, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_SD3_DATA0__LPUART2_CTS_B = IOMUX_PAD(0x02F0, 0x0140, 0x02, 0x0460, 0x00, 0x00), + MX91_PAD_SD3_DATA0__FLEXIO1_FLEXIO22 = IOMUX_PAD(0x02F0, 0x0140, 0x04, 0x03B8, 0x01, 0x00), + MX91_PAD_SD3_DATA0__GPIO3_IO22 = IOMUX_PAD(0x02F0, 0x0140, 0x05, 0x0000, 0x00, 0x00), + + MX91_PAD_SD3_DATA1__USDHC3_DATA1 = IOMUX_PAD(0x02F4, 0x0144, 0x00, 0x04F4, 0x01, 0x00), + MX91_PAD_SD3_DATA1__FLEXSPI1_A_DATA1 = IOMUX_PAD(0x02F4, 0x0144, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_SD3_DATA1__LPUART2_RTS_B = IOMUX_PAD(0x02F4, 0x0144, 0x02, 0x0000, 0x00, 0x00), + MX91_PAD_SD3_DATA1__FLEXIO1_FLEXIO23 = IOMUX_PAD(0x02F4, 0x0144, 0x04, 0x03BC, 0x01, 0x00), + MX91_PAD_SD3_DATA1__GPIO3_IO23 = IOMUX_PAD(0x02F4, 0x0144, 0x05, 0x0000, 0x00, 0x00), + + MX91_PAD_SD3_DATA2__USDHC3_DATA2 = IOMUX_PAD(0x02F8, 0x0148, 0x00, 0x04F8, 0x01, 0x00), + MX91_PAD_SD3_DATA2__LPI2C4_SDA = IOMUX_PAD(0x02F8, 0x0148, 0x02, 0x03FC, 0x01, 0x00), + MX91_PAD_SD3_DATA2__FLEXSPI1_A_DATA2 = IOMUX_PAD(0x02F8, 0x0148, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_SD3_DATA2__FLEXIO1_FLEXIO24 = IOMUX_PAD(0x02F8, 0x0148, 0x04, 0x03C0, 0x01, 0x00), + MX91_PAD_SD3_DATA2__GPIO3_IO24 = IOMUX_PAD(0x02F8, 0x0148, 0x05, 0x0000, 0x00, 0x00), + + MX91_PAD_SD3_DATA3__USDHC3_DATA3 = IOMUX_PAD(0x02FC, 0x014C, 0x00, 0x04FC, 0x01, 0x00), + MX91_PAD_SD3_DATA3__FLEXSPI1_A_DATA3 = IOMUX_PAD(0x02FC, 0x014C, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_SD3_DATA3__LPI2C4_SCL = IOMUX_PAD(0x02FC, 0x014C, 0x02, 0x03F8, 0x01, 0x00), + MX91_PAD_SD3_DATA3__FLEXIO1_FLEXIO25 = IOMUX_PAD(0x02FC, 0x014C, 0x04, 0x03C4, 0x01, 0x00), + MX91_PAD_SD3_DATA3__GPIO3_IO25 = IOMUX_PAD(0x02FC, 0x014C, 0x05, 0x0000, 0x00, 0x00), + + MX91_PAD_SD2_CD_B__USDHC2_CD_B = IOMUX_PAD(0x0300, 0x0150, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_SD2_CD_B__ENET_QOS_1588_EVENT0_IN = IOMUX_PAD(0x0300, 0x0150, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_SD2_CD_B__I3C2_SCL = IOMUX_PAD(0x0300, 0x0150, 0x02, 0x03CC, 0x01, 0x00), + MX91_PAD_SD2_CD_B__FLEXIO1_FLEXIO0 = IOMUX_PAD(0x0300, 0x0150, 0x04, 0x036C, 0x01, 0x00), + MX91_PAD_SD2_CD_B__GPIO3_IO0 = IOMUX_PAD(0x0300, 0x0150, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_SD2_CD_B__LPI2C1_SCL = IOMUX_PAD(0x0300, 0x0150, 0x03, 0x03E0, 0x01, 0x00), + + MX91_PAD_SD2_CLK__USDHC2_CLK = IOMUX_PAD(0x0304, 0x0154, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_SD2_CLK__ENET_QOS_1588_EVENT0_OUT = IOMUX_PAD(0x0304, 0x0154, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_SD2_CLK__I2C1_SDA = IOMUX_PAD(0x0304, 0x0154, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_SD2_CLK__I3C2_SDA = IOMUX_PAD(0x0304, 0x0154, 0x02, 0x03D0, 0x01, 0x00), + MX91_PAD_SD2_CLK__FLEXIO1_FLEXIO1 = IOMUX_PAD(0x0304, 0x0154, 0x04, 0x0370, 0x01, 0x00), + MX91_PAD_SD2_CLK__GPIO3_IO1 = IOMUX_PAD(0x0304, 0x0154, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_SD2_CLK__CCMSRCGPCMIX_OBSERVE0 = IOMUX_PAD(0x0304, 0x0154, 0x06, 0x0000, 0x00, 0x00), + MX91_PAD_SD2_CLK__LPI2C1_SDA = IOMUX_PAD(0x0304, 0x0154, 0x03, 0x03E4, 0x01, 0x00), + + MX91_PAD_SD2_CMD__USDHC2_CMD = IOMUX_PAD(0x0308, 0x0158, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_SD2_CMD__ENET2_1588_EVENT0_IN = IOMUX_PAD(0x0308, 0x0158, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_SD2_CMD__I3C2_PUR = IOMUX_PAD(0x0308, 0x0158, 0x02, 0x0000, 0x00, 0x00), + MX91_PAD_SD2_CMD__I3C2_PUR_B = IOMUX_PAD(0x0308, 0x0158, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_SD2_CMD__FLEXIO1_FLEXIO2 = IOMUX_PAD(0x0308, 0x0158, 0x04, 0x0374, 0x01, 0x00), + MX91_PAD_SD2_CMD__GPIO3_IO2 = IOMUX_PAD(0x0308, 0x0158, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_SD2_CMD__CCMSRCGPCMIX_OBSERVE1 = IOMUX_PAD(0x0308, 0x0158, 0x06, 0x0000, 0x00, 0x00), + + MX91_PAD_SD2_DATA0__USDHC2_DATA0 = IOMUX_PAD(0x030C, 0x015C, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_SD2_DATA0__ENET2_1588_EVENT0_OUT = IOMUX_PAD(0x030C, 0x015C, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_SD2_DATA0__CAN2_TX = IOMUX_PAD(0x030C, 0x015C, 0x02, 0x0000, 0x00, 0x00), + MX91_PAD_SD2_DATA0__FLEXIO1_FLEXIO3 = IOMUX_PAD(0x030C, 0x015C, 0x04, 0x0378, 0x01, 0x00), + MX91_PAD_SD2_DATA0__GPIO3_IO3 = IOMUX_PAD(0x030C, 0x015C, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_SD2_DATA0__LPUART1_TX = IOMUX_PAD(0x030C, 0x015C, 0x03, 0x045C, 0x00, 0x00), + MX91_PAD_SD2_DATA0__CCMSRCGPCMIX_OBSERVE2 = IOMUX_PAD(0x030C, 0x015C, 0x06, 0x0000, 0x00, 0x00), + + MX91_PAD_SD2_DATA1__USDHC2_DATA1 = IOMUX_PAD(0x0310, 0x0160, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_SD2_DATA1__ENET2_1588_EVENT1_IN = IOMUX_PAD(0x0310, 0x0160, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_SD2_DATA1__CAN2_RX = IOMUX_PAD(0x0310, 0x0160, 0x02, 0x0364, 0x03, 0x00), + MX91_PAD_SD2_DATA1__FLEXIO1_FLEXIO4 = IOMUX_PAD(0x0310, 0x0160, 0x04, 0x037C, 0x01, 0x00), + MX91_PAD_SD2_DATA1__GPIO3_IO4 = IOMUX_PAD(0x0310, 0x0160, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_SD2_DATA1__LPUART1_RX = IOMUX_PAD(0x0310, 0x0160, 0x03, 0x0458, 0x00, 0x00), + MX91_PAD_SD2_DATA1__CCMSRCGPCMIX_WAIT = IOMUX_PAD(0x0310, 0x0160, 0x06, 0x0000, 0x00, 0x00), + + MX91_PAD_SD2_DATA2__USDHC2_DATA2 = IOMUX_PAD(0x0314, 0x0164, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_SD2_DATA2__ENET2_1588_EVENT1_OUT = IOMUX_PAD(0x0314, 0x0164, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_SD2_DATA2__MQS2_RIGHT = IOMUX_PAD(0x0314, 0x0164, 0x02, 0x0000, 0x00, 0x00), + MX91_PAD_SD2_DATA2__FLEXIO1_FLEXIO5 = IOMUX_PAD(0x0314, 0x0164, 0x04, 0x0380, 0x01, 0x00), + MX91_PAD_SD2_DATA2__GPIO3_IO5 = IOMUX_PAD(0x0314, 0x0164, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_SD2_DATA2__LPUART2_TX = IOMUX_PAD(0x0314, 0x0164, 0x03, 0x0468, 0x00, 0x00), + MX91_PAD_SD2_DATA2__CCMSRCGPCMIX_STOP = IOMUX_PAD(0x0314, 0x0164, 0x06, 0x0000, 0x00, 0x00), + + MX91_PAD_SD2_DATA3__USDHC2_DATA3 = IOMUX_PAD(0x0318, 0x0168, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_SD2_DATA3__LPTMR2_ALT1 = IOMUX_PAD(0x0318, 0x0168, 0x01, 0x0448, 0x01, 0x00), + MX91_PAD_SD2_DATA3__MQS2_LEFT = IOMUX_PAD(0x0318, 0x0168, 0x02, 0x0000, 0x00, 0x00), + MX91_PAD_SD2_DATA3__FLEXIO1_FLEXIO6 = IOMUX_PAD(0x0318, 0x0168, 0x04, 0x0384, 0x01, 0x00), + MX91_PAD_SD2_DATA3__GPIO3_IO6 = IOMUX_PAD(0x0318, 0x0168, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_SD2_DATA3__LPUART2_RX = IOMUX_PAD(0x0318, 0x0168, 0x03, 0x0464, 0x00, 0x00), + MX91_PAD_SD2_DATA3__CCMSRCGPCMIX_EARLY_RESET = IOMUX_PAD(0x0318, 0x0168, 0x06, 0x0000, 0x00, 0x00), + + MX91_PAD_SD2_RESET_B__USDHC2_RESET_B = IOMUX_PAD(0x031C, 0x016C, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_SD2_RESET_B__LPTMR2_ALT2 = IOMUX_PAD(0x031C, 0x016C, 0x01, 0x044C, 0x01, 0x00), + MX91_PAD_SD2_RESET_B__FLEXIO1_FLEXIO7 = IOMUX_PAD(0x031C, 0x016C, 0x04, 0x0388, 0x01, 0x00), + MX91_PAD_SD2_RESET_B__GPIO3_IO7 = IOMUX_PAD(0x031C, 0x016C, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_SD2_RESET_B__CCMSRCGPCMIX_SYSTEM_RESET = IOMUX_PAD(0x031C, 0x016C, 0x06, 0x0000, 0x00, 0x00), + + MX91_PAD_I2C1_SCL__LPI2C1_SCL = IOMUX_PAD(0x0320, 0x0170, 0x00, 0x03E0, 0x02, 0x00), + MX91_PAD_I2C1_SCL__I3C1_SCL = IOMUX_PAD(0x0320, 0x0170, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_I2C1_SCL__LPUART1_DCB_B = IOMUX_PAD(0x0320, 0x0170, 0x02, 0x0000, 0x00, 0x00), + MX91_PAD_I2C1_SCL__TPM2_CH0 = IOMUX_PAD(0x0320, 0x0170, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_I2C1_SCL__GPIO1_IO0 = IOMUX_PAD(0x0320, 0x0170, 0x05, 0x0000, 0x00, 0x00), + + MX91_PAD_I2C1_SDA__LPI2C1_SDA = IOMUX_PAD(0x0324, 0x0174, 0x00, 0x03E4, 0x02, 0x00), + MX91_PAD_I2C1_SDA__I3C1_SDA = IOMUX_PAD(0x0324, 0x0174, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_I2C1_SDA__LPUART1_RIN_B = IOMUX_PAD(0x0324, 0x0174, 0x02, 0x0000, 0x00, 0x00), + MX91_PAD_I2C1_SDA__TPM2_CH1 = IOMUX_PAD(0x0324, 0x0174, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_I2C1_SDA__GPIO1_IO1 = IOMUX_PAD(0x0324, 0x0174, 0x05, 0x0000, 0x00, 0x00), + + MX91_PAD_I2C2_SCL__LPI2C2_SCL = IOMUX_PAD(0x0328, 0x0178, 0x00, 0x03E8, 0x01, 0x00), + MX91_PAD_I2C2_SCL__I3C1_PUR = IOMUX_PAD(0x0328, 0x0178, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_I2C2_SCL__LPUART2_DCB_B = IOMUX_PAD(0x0328, 0x0178, 0x02, 0x0000, 0x00, 0x00), + MX91_PAD_I2C2_SCL__TPM2_CH2 = IOMUX_PAD(0x0328, 0x0178, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_I2C2_SCL__SAI1_RX_SYNC = IOMUX_PAD(0x0328, 0x0178, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_I2C2_SCL__GPIO1_IO3 = IOMUX_PAD(0x0328, 0x0178, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_I2C2_SCL__I3C1_PUR_B = IOMUX_PAD(0x0328, 0x0178, 0x06, 0x0000, 0x00, 0x00), + + MX91_PAD_I2C2_SDA__LPI2C2_SDA = IOMUX_PAD(0x032C, 0x017C, 0x00, 0x03EC, 0x01, 0x00), + MX91_PAD_I2C2_SDA__LPUART2_RIN_B = IOMUX_PAD(0x032C, 0x017C, 0x02, 0x0000, 0x00, 0x00), + MX91_PAD_I2C2_SDA__TPM2_CH3 = IOMUX_PAD(0x032C, 0x017C, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_I2C2_SDA__SAI1_RX_BCLK = IOMUX_PAD(0x032C, 0x017C, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_I2C2_SDA__GPIO1_IO3 = IOMUX_PAD(0x032C, 0x017C, 0x05, 0x0000, 0x00, 0x00), + + MX91_PAD_UART1_RXD__LPUART1_RX = IOMUX_PAD(0x0330, 0x0180, 0x00, 0x0458, 0x01, 0x00), + MX91_PAD_UART1_RXD__ELE_UART_RX = IOMUX_PAD(0x0330, 0x0180, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_UART1_RXD__LPSPI2_SIN = IOMUX_PAD(0x0330, 0x0180, 0x02, 0x0440, 0x02, 0x00), + MX91_PAD_UART1_RXD__TPM1_CH0 = IOMUX_PAD(0x0330, 0x0180, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_UART1_RXD__GPIO1_IO4 = IOMUX_PAD(0x0330, 0x0180, 0x05, 0x0000, 0x00, 0x00), + + MX91_PAD_UART1_TXD__LPUART1_TX = IOMUX_PAD(0x0334, 0x0184, 0x00, 0x045C, 0x01, 0x00), + MX91_PAD_UART1_TXD__ELE_UART_TX = IOMUX_PAD(0x0334, 0x0184, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_UART1_TXD__LPSPI2_PCS0 = IOMUX_PAD(0x0334, 0x0184, 0x02, 0x0434, 0x02, 0x00), + MX91_PAD_UART1_TXD__TPM1_CH1 = IOMUX_PAD(0x0334, 0x0184, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_UART1_TXD__GPIO1_IO5 = IOMUX_PAD(0x0334, 0x0184, 0x05, 0x0000, 0x00, 0x00), + + MX91_PAD_UART2_RXD__LPUART2_RX = IOMUX_PAD(0x0338, 0x0188, 0x00, 0x0464, 0x01, 0x00), + MX91_PAD_UART2_RXD__LPUART1_CTS_B = IOMUX_PAD(0x0338, 0x0188, 0x01, 0x0454, 0x01, 0x00), + MX91_PAD_UART2_RXD__LPSPI2_SOUT = IOMUX_PAD(0x0338, 0x0188, 0x02, 0x0444, 0x02, 0x00), + MX91_PAD_UART2_RXD__TPM1_CH2 = IOMUX_PAD(0x0338, 0x0188, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_UART2_RXD__SAI1_MCLK = IOMUX_PAD(0x0338, 0x0188, 0x04, 0x04D4, 0x00, 0x00), + MX91_PAD_UART2_RXD__GPIO1_IO6 = IOMUX_PAD(0x0338, 0x0188, 0x05, 0x0000, 0x00, 0x00), + + MX91_PAD_UART2_TXD__LPUART2_TX = IOMUX_PAD(0x033C, 0x018C, 0x00, 0x0468, 0x01, 0x00), + MX91_PAD_UART2_TXD__LPUART1_RTS_B = IOMUX_PAD(0x033C, 0x018C, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_UART2_TXD__LPSPI2_SCK = IOMUX_PAD(0x033C, 0x018C, 0x02, 0x043C, 0x02, 0x00), + MX91_PAD_UART2_TXD__TPM1_CH3 = IOMUX_PAD(0x033C, 0x018C, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_UART2_TXD__GPIO1_IO7 = IOMUX_PAD(0x033C, 0x018C, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_UART2_TXD__SAI3_TX_SYNC = IOMUX_PAD(0x033C, 0x018C, 0x07, 0x04E0, 0x02, 0x00), + + MX91_PAD_PDM_CLK__PDM_CLK = IOMUX_PAD(0x0340, 0x0190, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_PDM_CLK__MQS1_LEFT = IOMUX_PAD(0x0340, 0x0190, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_PDM_CLK__LPTMR1_ALT1 = IOMUX_PAD(0x0340, 0x0190, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_PDM_CLK__GPIO1_IO8 = IOMUX_PAD(0x0340, 0x0190, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_PDM_CLK__CAN1_TX = IOMUX_PAD(0x0340, 0x0190, 0x06, 0x0000, 0x00, 0x00), + + MX91_PAD_PDM_BIT_STREAM0__PDM_BIT_STREAM0 = IOMUX_PAD(0x0344, 0x0194, 0x00, 0x04C4, 0x02, 0x00), + MX91_PAD_PDM_BIT_STREAM0__MQS1_RIGHT = IOMUX_PAD(0x0344, 0x0194, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_PDM_BIT_STREAM0__LPSPI1_PCS1 = IOMUX_PAD(0x0344, 0x0194, 0x02, 0x0424, 0x01, 0x00), + MX91_PAD_PDM_BIT_STREAM0__TPM1_EXTCLK = IOMUX_PAD(0x0344, 0x0194, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_PDM_BIT_STREAM0__LPTMR1_ALT2 = IOMUX_PAD(0x0344, 0x0194, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_PDM_BIT_STREAM0__GPIO1_IO9 = IOMUX_PAD(0x0344, 0x0194, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_PDM_BIT_STREAM0__CAN1_RX = IOMUX_PAD(0x0344, 0x0194, 0x06, 0x0360, 0x01, 0x00), + + MX91_PAD_PDM_BIT_STREAM1__PDM_BIT_STREAM1 = IOMUX_PAD(0x0348, 0x0198, 0x00, 0x04C8, 0x02, 0x00), + MX91_PAD_PDM_BIT_STREAM1__LPSPI2_PCS1 = IOMUX_PAD(0x0348, 0x0198, 0x02, 0x0438, 0x01, 0x00), + MX91_PAD_PDM_BIT_STREAM1__TPM2_EXTCLK = IOMUX_PAD(0x0348, 0x0198, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_PDM_BIT_STREAM1__LPTMR1_ALT3 = IOMUX_PAD(0x0348, 0x0198, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_PDM_BIT_STREAM1__GPIO1_IO10 = IOMUX_PAD(0x0348, 0x0198, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_PDM_BIT_STREAM1__CCMSRCGPCMIX_EXT_CLK1 = IOMUX_PAD(0x0348, 0x0198, 0x06, 0x0368, 0x01, 0x00), + + MX91_PAD_SAI1_TXFS__SAI1_TX_SYNC = IOMUX_PAD(0x034C, 0x019C, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_SAI1_TXFS__SAI1_TX_DATA1 = IOMUX_PAD(0x034C, 0x019C, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_SAI1_TXFS__LPSPI1_PCS0 = IOMUX_PAD(0x034C, 0x019C, 0x02, 0x0420, 0x01, 0x00), + MX91_PAD_SAI1_TXFS__LPUART2_DTR_B = IOMUX_PAD(0x034C, 0x019C, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_SAI1_TXFS__MQS1_LEFT = IOMUX_PAD(0x034C, 0x019C, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_SAI1_TXFS__GPIO1_IO11 = IOMUX_PAD(0x034C, 0x019C, 0x05, 0x0000, 0x00, 0x00), + + MX91_PAD_SAI1_TXC__SAI1_TX_BCLK = IOMUX_PAD(0x0350, 0x01A0, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_SAI1_TXC__LPUART2_CTS_B = IOMUX_PAD(0x0350, 0x01A0, 0x01, 0x0460, 0x01, 0x00), + MX91_PAD_SAI1_TXC__LPSPI1_SIN = IOMUX_PAD(0x0350, 0x01A0, 0x02, 0x042C, 0x01, 0x00), + MX91_PAD_SAI1_TXC__LPUART1_DSR_B = IOMUX_PAD(0x0350, 0x01A0, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_SAI1_TXC__CAN1_RX = IOMUX_PAD(0x0350, 0x01A0, 0x04, 0x0360, 0x02, 0x00), + MX91_PAD_SAI1_TXC__GPIO1_IO12 = IOMUX_PAD(0x0350, 0x01A0, 0x05, 0x0000, 0x00, 0x00), + + MX91_PAD_SAI1_TXD0__SAI1_TX_DATA0 = IOMUX_PAD(0x0354, 0x01A4, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_SAI1_TXD0__LPUART2_RTS_B = IOMUX_PAD(0x0354, 0x01A4, 0x01, 0x0000, 0x00, 0x00), + MX91_PAD_SAI1_TXD0__LPSPI1_SCK = IOMUX_PAD(0x0354, 0x01A4, 0x02, 0x0428, 0x01, 0x00), + MX91_PAD_SAI1_TXD0__LPUART1_DTR_B = IOMUX_PAD(0x0354, 0x01A4, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_SAI1_TXD0__CAN1_TX = IOMUX_PAD(0x0354, 0x01A4, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_SAI1_TXD0__GPIO1_IO13 = IOMUX_PAD(0x0354, 0x01A4, 0x05, 0x0000, 0x00, 0x00), + MX91_PAD_SAI1_TXD0__SAI1_MCLK = IOMUX_PAD(0x0354, 0x01A4, 0x06, 0x04D4, 0x01, 0x00), + + MX91_PAD_SAI1_RXD0__SAI1_RX_DATA0 = IOMUX_PAD(0x0358, 0x01A8, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_SAI1_RXD0__SAI1_MCLK = IOMUX_PAD(0x0358, 0x01A8, 0x01, 0x04D4, 0x02, 0x00), + MX91_PAD_SAI1_RXD0__LPSPI1_SOUT = IOMUX_PAD(0x0358, 0x01A8, 0x02, 0x0430, 0x01, 0x00), + MX91_PAD_SAI1_RXD0__LPUART2_DSR_B = IOMUX_PAD(0x0358, 0x01A8, 0x03, 0x0000, 0x00, 0x00), + MX91_PAD_SAI1_RXD0__MQS1_RIGHT = IOMUX_PAD(0x0358, 0x01A8, 0x04, 0x0000, 0x00, 0x00), + MX91_PAD_SAI1_RXD0__GPIO1_IO14 = IOMUX_PAD(0x0358, 0x01A8, 0x05, 0x0000, 0x00, 0x00), + + MX91_PAD_WDOG_ANY__WDOG1_WDOG_ANY = IOMUX_PAD(0x035C, 0x01AC, 0x00, 0x0000, 0x00, 0x00), + MX91_PAD_WDOG_ANY__GPIO1_IO15 = IOMUX_PAD(0x035C, 0x01AC, 0x05, 0x0000, 0x00, 0x00), +}; +#endif /* __ASM_ARCH_IMX91_PINS_H__ */ diff --git a/arch/arm/include/asm/mach-imx/iomux-v3.h b/arch/arm/include/asm/mach-imx/iomux-v3.h index 0492abd298c..149c7b75679 100644 --- a/arch/arm/include/asm/mach-imx/iomux-v3.h +++ b/arch/arm/include/asm/mach-imx/iomux-v3.h @@ -86,7 +86,7 @@ typedef u64 iomux_v3_cfg_t; #define IOMUX_CONFIG_LPSR 0x20 #define MUX_MODE_LPSR ((iomux_v3_cfg_t)IOMUX_CONFIG_LPSR << \ MUX_MODE_SHIFT) -#ifdef CONFIG_IMX93 +#if defined(CONFIG_IMX93) || defined(CONFIG_IMX91) #define PAD_CTL_FSEL2 (0x2 << 7) #define PAD_CTL_FSEL3 (0x3 << 7) #define PAD_CTL_PUE (0x1 << 9) diff --git a/arch/arm/include/asm/mach-imx/sys_proto.h b/arch/arm/include/asm/mach-imx/sys_proto.h index 31ace977d2b..109a806852a 100644 --- a/arch/arm/include/asm/mach-imx/sys_proto.h +++ b/arch/arm/include/asm/mach-imx/sys_proto.h @@ -97,6 +97,12 @@ struct bd_info; #define is_imx9302() (is_cpu_type(MXC_CPU_IMX9302)) #define is_imx9301() (is_cpu_type(MXC_CPU_IMX9301)) +#define is_imx9121() (is_cpu_type(MXC_CPU_IMX9121)) +#define is_imx9111() (is_cpu_type(MXC_CPU_IMX9111)) +#define is_imx9101() (is_cpu_type(MXC_CPU_IMX9101)) +#define is_imx91() (is_cpu_type(MXC_CPU_IMX91) || is_cpu_type(MXC_CPU_IMX9111) || \ + is_cpu_type(MXC_CPU_IMX9101) || is_cpu_type(MXC_CPU_IMX9121)) + #define is_imxrt1020() (is_cpu_type(MXC_CPU_IMXRT1020)) #define is_imxrt1050() (is_cpu_type(MXC_CPU_IMXRT1050)) diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index 52f6c9b934d..dbf9ab43e28 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -171,7 +171,7 @@ static inline unsigned int current_el(void) return 3 & (el >> 2); } -static inline unsigned int get_sctlr(void) +static inline unsigned long get_sctlr(void) { unsigned int el; unsigned long val; diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c index 192c120a7d2..974cbfe8400 100644 --- a/arch/arm/lib/bootm.c +++ b/arch/arm/lib/bootm.c @@ -73,11 +73,10 @@ static void announce_and_cleanup(int fake) * Call remove function of all devices with a removal flag set. * This may be useful for last-stage operations, like cancelling * of DMA operation or releasing device internal buffers. + * dm_remove_devices_active() ensures that vital devices are removed in + * a second round. */ - dm_remove_devices_flags(DM_REMOVE_ACTIVE_ALL | DM_REMOVE_NON_VITAL); - - /* Remove all active vital devices next */ - dm_remove_devices_flags(DM_REMOVE_ACTIVE_ALL); + dm_remove_devices_active(); cleanup_before_linux(); } diff --git a/arch/arm/mach-apple/board.c b/arch/arm/mach-apple/board.c index 0b6d290b8ac..2644a04a622 100644 --- a/arch/arm/mach-apple/board.c +++ b/arch/arm/mach-apple/board.c @@ -691,11 +691,12 @@ int dram_init_banksize(void) extern long fw_dtb_pointer; -void *board_fdt_blob_setup(int *err) +int board_fdt_blob_setup(void **fdtp) { /* Return DTB pointer passed by m1n1 */ - *err = 0; - return (void *)fw_dtb_pointer; + *fdtp = (void *)fw_dtb_pointer; + + return 0; } void build_mem_map(void) diff --git a/arch/arm/mach-aspeed/Kconfig b/arch/arm/mach-aspeed/Kconfig index 1e7dc10e170..9cf60378c11 100644 --- a/arch/arm/mach-aspeed/Kconfig +++ b/arch/arm/mach-aspeed/Kconfig @@ -16,8 +16,8 @@ choice config ASPEED_AST2500 bool "Support Aspeed AST2500 SoC" - depends on DM_RESET select CPU_ARM1176 + select DM_RESET help The Aspeed AST2500 is a ARM-based SoC with arm1176 CPU. It is used as Board Management Controller on many server boards, diff --git a/arch/arm/mach-aspeed/ast2600/spl.c b/arch/arm/mach-aspeed/ast2600/spl.c index 05390c16f3a..0c5a82ed094 100644 --- a/arch/arm/mach-aspeed/ast2600/spl.c +++ b/arch/arm/mach-aspeed/ast2600/spl.c @@ -45,10 +45,10 @@ u32 spl_boot_device(void) } /* boot from UART has higher priority */ - if (scu->hwstrap2 & SCU_HWSTRAP2_BOOT_UART) + if (readl(&scu->hwstrap2) & SCU_HWSTRAP2_BOOT_UART) return BOOT_DEVICE_UART; - if (scu->hwstrap1 & SCU_HWSTRAP1_BOOT_EMMC) + if (readl(&scu->hwstrap1) & SCU_HWSTRAP1_BOOT_EMMC) return BOOT_DEVICE_MMC1; out: diff --git a/arch/arm/mach-bcmbca/bcm47622/Kconfig b/arch/arm/mach-bcmbca/bcm47622/Kconfig index bce30892e35..56ce280a1cd 100644 --- a/arch/arm/mach-bcmbca/bcm47622/Kconfig +++ b/arch/arm/mach-bcmbca/bcm47622/Kconfig @@ -8,6 +8,7 @@ if BCM47622 config TARGET_BCM947622 bool "Broadcom 47622 Reference Board" depends on ARCH_BCMBCA + imply OF_UPSTREAM config SYS_SOC default "bcm47622" diff --git a/arch/arm/mach-bcmbca/bcm4912/Kconfig b/arch/arm/mach-bcmbca/bcm4912/Kconfig index b8c14d1dc1a..9844ddeb8b8 100644 --- a/arch/arm/mach-bcmbca/bcm4912/Kconfig +++ b/arch/arm/mach-bcmbca/bcm4912/Kconfig @@ -8,6 +8,7 @@ if BCM4912 config TARGET_BCM94912 bool "Broadcom 4912 Reference Board" depends on ARCH_BCMBCA + imply OF_UPSTREAM config SYS_SOC default "bcm4912" diff --git a/arch/arm/mach-bcmbca/bcm63146/Kconfig b/arch/arm/mach-bcmbca/bcm63146/Kconfig index 690cbf1eb20..7c26742e474 100644 --- a/arch/arm/mach-bcmbca/bcm63146/Kconfig +++ b/arch/arm/mach-bcmbca/bcm63146/Kconfig @@ -8,6 +8,7 @@ if BCM63146 config TARGET_BCM963146 bool "Broadcom 63146 Reference Board" depends on ARCH_BCMBCA + imply OF_UPSTREAM config SYS_SOC default "bcm63146" diff --git a/arch/arm/mach-bcmbca/bcm63158/Kconfig b/arch/arm/mach-bcmbca/bcm63158/Kconfig index b77444369ec..6db7b36aa32 100644 --- a/arch/arm/mach-bcmbca/bcm63158/Kconfig +++ b/arch/arm/mach-bcmbca/bcm63158/Kconfig @@ -8,6 +8,7 @@ if BCM63158 config TARGET_BCM963158 bool "Broadcom 63158 Reference Board" depends on ARCH_BCMBCA + imply OF_UPSTREAM config SYS_SOC default "bcm63158" diff --git a/arch/arm/mach-bcmbca/bcm63178/Kconfig b/arch/arm/mach-bcmbca/bcm63178/Kconfig index 73ac46284b2..167acfff2c9 100644 --- a/arch/arm/mach-bcmbca/bcm63178/Kconfig +++ b/arch/arm/mach-bcmbca/bcm63178/Kconfig @@ -8,6 +8,7 @@ if BCM63178 config TARGET_BCM963178 bool "Broadcom 63178 Reference Board" depends on ARCH_BCMBCA + imply OF_UPSTREAM config SYS_SOC default "bcm63178" diff --git a/arch/arm/mach-bcmbca/bcm6756/Kconfig b/arch/arm/mach-bcmbca/bcm6756/Kconfig index c83dcd0f3e2..bbaa45eaab0 100644 --- a/arch/arm/mach-bcmbca/bcm6756/Kconfig +++ b/arch/arm/mach-bcmbca/bcm6756/Kconfig @@ -8,6 +8,7 @@ if BCM6756 config TARGET_BCM96756 bool "Broadcom 6756 Reference Board" depends on ARCH_BCMBCA + imply OF_UPSTREAM config SYS_SOC default "bcm6756" diff --git a/arch/arm/mach-bcmbca/bcm6813/Kconfig b/arch/arm/mach-bcmbca/bcm6813/Kconfig index 25a4221bef9..0cda69cb43e 100644 --- a/arch/arm/mach-bcmbca/bcm6813/Kconfig +++ b/arch/arm/mach-bcmbca/bcm6813/Kconfig @@ -8,6 +8,7 @@ if BCM6813 config TARGET_BCM96813 bool "Broadcom 6813 Reference Board" depends on ARCH_BCMBCA + imply OF_UPSTREAM config SYS_SOC default "bcm6813" diff --git a/arch/arm/mach-bcmbca/bcm6855/Kconfig b/arch/arm/mach-bcmbca/bcm6855/Kconfig index 78087c7dd59..31eaaed7ca2 100644 --- a/arch/arm/mach-bcmbca/bcm6855/Kconfig +++ b/arch/arm/mach-bcmbca/bcm6855/Kconfig @@ -8,6 +8,7 @@ if BCM6855 config TARGET_BCM96855 bool "Broadcom 6855 Reference Board" depends on ARCH_BCMBCA + imply OF_UPSTREAM config SYS_SOC default "bcm6855" diff --git a/arch/arm/mach-bcmbca/bcm6856/Kconfig b/arch/arm/mach-bcmbca/bcm6856/Kconfig index 6ac75cb8409..7b09a1577bb 100644 --- a/arch/arm/mach-bcmbca/bcm6856/Kconfig +++ b/arch/arm/mach-bcmbca/bcm6856/Kconfig @@ -8,6 +8,7 @@ if BCM6856 config TARGET_BCM96856 bool "Broadcom 6856 Reference Board" depends on ARCH_BCMBCA + imply OF_UPSTREAM config SYS_SOC default "bcm6856" diff --git a/arch/arm/mach-bcmbca/bcm6858/Kconfig b/arch/arm/mach-bcmbca/bcm6858/Kconfig index a6504bae1f1..d32107a17a8 100644 --- a/arch/arm/mach-bcmbca/bcm6858/Kconfig +++ b/arch/arm/mach-bcmbca/bcm6858/Kconfig @@ -8,6 +8,7 @@ if BCM6858 config TARGET_BCM96858 bool "Broadcom 6858 Reference Board" depends on ARCH_BCMBCA + imply OF_UPSTREAM config SYS_SOC default "bcm6858" diff --git a/arch/arm/mach-bcmbca/bcm6878/Kconfig b/arch/arm/mach-bcmbca/bcm6878/Kconfig index 43f8942c9b1..2365cfde6ec 100644 --- a/arch/arm/mach-bcmbca/bcm6878/Kconfig +++ b/arch/arm/mach-bcmbca/bcm6878/Kconfig @@ -8,6 +8,7 @@ if BCM6878 config TARGET_BCM96878 bool "Broadcom 6878 Reference Board" depends on ARCH_BCMBCA + imply OF_UPSTREAM config SYS_SOC default "bcm6878" diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig index 59d11b3179e..9a43beda6fa 100644 --- a/arch/arm/mach-imx/imx8/Kconfig +++ b/arch/arm/mach-imx/imx8/Kconfig @@ -54,15 +54,8 @@ config TARGET_COLIBRI_IMX8X select BOARD_LATE_INIT select IMX8QXP -config TARGET_DENEB - bool "Support i.MX8QXP Capricorn Deneb board" - select BINMAN - select BOARD_LATE_INIT - select FACTORYSET - select IMX8QXP - -config TARGET_GIEDI - bool "Support i.MX8QXP Capricorn Giedi board" +config TARGET_CAPRICORN + bool "Support i.MX8QXP Capricorn board" select BINMAN select BOARD_LATE_INIT select FACTORYSET diff --git a/arch/arm/mach-imx/imx8/fdt.c b/arch/arm/mach-imx/imx8/fdt.c index 6d0585f5cc6..ce78c8ce919 100644 --- a/arch/arm/mach-imx/imx8/fdt.c +++ b/arch/arm/mach-imx/imx8/fdt.c @@ -11,6 +11,8 @@ #include <fdt_support.h> #include <linux/libfdt.h> #include <linux/printk.h> +#include <cpu.h> +#include <dm.h> DECLARE_GLOBAL_DATA_PTR; @@ -279,6 +281,134 @@ static int ft_add_optee_node(void *fdt, struct bd_info *bd) return 0; } +static int delete_node(void *blob, const char *node) +{ + int nodeoffset; + int err; + + nodeoffset = fdt_path_offset(blob, node); + if (nodeoffset < 0) + return -ENXIO; + + err = fdt_del_node(blob, nodeoffset); + if (err) + return -EINVAL; + + return 0; +} + +static int change_property(void *blob, const char *node, const char *property, + const void *value, int len) +{ + int nodeoffset; + int err; + + nodeoffset = fdt_path_offset(blob, node); + if (nodeoffset < 0) + return -ENXIO; + + err = fdt_setprop(blob, nodeoffset, property, value, len); + if (err) + return -EINVAL; + + return 0; +} + +static void update_fdt_gpu_industrial_frequencies(void *blob) +{ + u32 gpu_opp_table[6]; + u32 gpu_assigned_clocks[2]; + int err; + + gpu_opp_table[0] = cpu_to_fdt32(625000); /* Normal Core Clock */ + gpu_opp_table[1] = cpu_to_fdt32(0); + gpu_opp_table[2] = cpu_to_fdt32(625000); /* Normal Shader Clock */ + gpu_opp_table[3] = cpu_to_fdt32(0); + gpu_opp_table[4] = cpu_to_fdt32(400000); /* Low Shader and Core Clock */ + gpu_opp_table[5] = cpu_to_fdt32(0); + + gpu_assigned_clocks[0] = cpu_to_fdt32(625000000); /* Core Clock */ + gpu_assigned_clocks[1] = cpu_to_fdt32(625000000); /* Shader Clock */ + + err = change_property(blob, "/bus@53100000/gpu@53100000", + "assigned-clock-rates", gpu_assigned_clocks, + sizeof(gpu_assigned_clocks)); + if (err && err != ENXIO) + printf("Failed to set assigned-clock-rates for GPU0: %s\n", + fdt_strerror(err)); + + err = change_property(blob, "/bus@54100000/gpu@54100000", + "assigned-clock-rates", gpu_assigned_clocks, + sizeof(gpu_assigned_clocks)); + if (err && err != ENXIO) + printf("Failed to set assigned-clock-rates for GPU1: %s\n", + fdt_strerror(err)); + + err = change_property(blob, "/bus@54100000/imx8_gpu1_ss@80000000", + "operating-points", &gpu_opp_table, + sizeof(gpu_opp_table)); + if (err && err != ENXIO) + printf("Failed to set operating-points for GPU: %s\n", + fdt_strerror(err)); +} + +static void update_fdt_cpu_industrial_frequencies(void *blob) +{ + int err; + + err = delete_node(blob, "/opp-table-0/opp-1200000000"); + if (err && err != -ENXIO) + printf("Failed to delete 1.2 GHz node on A53: %s\n", + fdt_strerror(err)); + + err = delete_node(blob, "/opp-table-1/opp-1596000000"); + if (err && err != -ENXIO) + printf("Failed to delete 1.596 GHz node on A72: %s\n", + fdt_strerror(err)); +} + +static void update_fdt_frequencies(void *blob) +{ + struct cpu_info cpu; + struct udevice *dev; + int err; + + uclass_first_device(UCLASS_CPU, &dev); + + err = cpu_get_info(dev, &cpu); + if (err) { + printf("Failed to get CPU info\n"); + return; + } + + /* + * Differentiate between the automotive and industrial variants of the + * i.MX8. The difference of these two CPUs is the maximum frequencies + * for the CPU and GPU. + * Core Automotive [max. MHz] Industrial [max. MHz] + * A53 1200 1104 + * A72 1596 1296 + * GPU Core 800 625 + * GPU Shader 1000 625 + * + * While the SCFW enforces these limits for the CPU, the OS cpufreq + * driver remains unaware, causing a mismatch between reported and + * actual frequencies. This is resolved by removing the unsupprted + * frequencies from the device tree. + * + * The GPU frequencies are not enforced by the SCFW, therefore without + * updating the device tree we overclock the GPU. + * + * Using the cpu_freq variable is the only know way to differentiate + * between the automotive and industrial variants of the i.MX8. + */ + if (cpu.cpu_freq != 1104000000) + return; + + update_fdt_cpu_industrial_frequencies(blob); + update_fdt_gpu_industrial_frequencies(blob); +} + int ft_system_setup(void *blob, struct bd_info *bd) { int ret; @@ -294,6 +424,8 @@ int ft_system_setup(void *blob, struct bd_info *bd) update_fdt_with_owned_resources(blob); + update_fdt_frequencies(blob); + if (is_imx8qm()) { ret = config_smmu_fdt(blob); if (ret) diff --git a/arch/arm/mach-imx/imx8m/soc.c b/arch/arm/mach-imx/imx8m/soc.c index 9588b8b28bf..85dc8b51a14 100644 --- a/arch/arm/mach-imx/imx8m/soc.c +++ b/arch/arm/mach-imx/imx8m/soc.c @@ -362,7 +362,7 @@ phys_addr_t board_get_usable_ram_top(phys_size_t total_size) * space below the 4G address boundary (which is 3GiB big), * even when the effective available memory is bigger. */ - top_addr = clamp_val((u64)PHYS_SDRAM + gd->ram_size, 0, 0xffffffff); + top_addr = clamp_val((u64)PHYS_SDRAM + gd->ram_size, 0, SZ_4G); /* * rom_pointer[0] stores the TEE memory start address. diff --git a/arch/arm/mach-imx/imx9/Kconfig b/arch/arm/mach-imx/imx9/Kconfig index 5c1054138fc..54c6b117fcf 100644 --- a/arch/arm/mach-imx/imx9/Kconfig +++ b/arch/arm/mach-imx/imx9/Kconfig @@ -16,6 +16,12 @@ config IMX93 select IMX9 select ARMV8_SPL_EXCEPTION_VECTORS +config IMX91 + bool + select IMX9 + select ARMV8_SPL_EXCEPTION_VECTORS + + config SYS_SOC default "imx9" @@ -23,6 +29,12 @@ choice prompt "NXP i.MX9 board select" optional +config TARGET_IMX91_11X11_EVK + bool "imx91_11x11_evk" + select OF_BOARD_FIXUP + select IMX91 + imply OF_UPSTREAM + config TARGET_IMX93_9X9_QSB bool "imx93_qsb" select OF_BOARD_FIXUP @@ -45,9 +57,12 @@ config TARGET_PHYCORE_IMX93 bool "phycore_imx93" select IMX93 select IMX9_LPDDR4X + select OF_BOARD_FIXUP + select OF_BOARD_SETUP endchoice +source "board/freescale/imx91_evk/Kconfig" source "board/freescale/imx93_evk/Kconfig" source "board/freescale/imx93_qsb/Kconfig" source "board/phytec/phycore_imx93/Kconfig" diff --git a/arch/arm/mach-imx/imx9/clock.c b/arch/arm/mach-imx/imx9/clock.c index c00be19c4fa..e65cabef2c9 100644 --- a/arch/arm/mach-imx/imx9/clock.c +++ b/arch/arm/mach-imx/imx9/clock.c @@ -30,6 +30,7 @@ static struct imx_intpll_rate_table imx9_intpll_tbl[] = { INT_PLL_RATE(1400000000U, 1, 175, 3), /* 1.4Ghz */ INT_PLL_RATE(1000000000U, 1, 166, 4), /* 1000Mhz */ INT_PLL_RATE(900000000U, 1, 150, 4), /* 900Mhz */ + INT_PLL_RATE(800000000U, 1, 200, 6), /* 800Mhz */ }; static struct imx_fracpll_rate_table imx9_fracpll_tbl[] = { @@ -37,12 +38,14 @@ static struct imx_fracpll_rate_table imx9_fracpll_tbl[] = { FRAC_PLL_RATE(933000000U, 1, 155, 4, 1, 2), /* 933Mhz */ FRAC_PLL_RATE(800000000U, 1, 200, 6, 0, 1), /* 800Mhz */ FRAC_PLL_RATE(700000000U, 1, 145, 5, 5, 6), /* 700Mhz */ + FRAC_PLL_RATE(600000000U, 1, 200, 8, 0, 1), /* 600Mhz */ FRAC_PLL_RATE(484000000U, 1, 121, 6, 0, 1), FRAC_PLL_RATE(445333333U, 1, 167, 9, 0, 1), FRAC_PLL_RATE(466000000U, 1, 155, 8, 1, 3), /* 466Mhz */ FRAC_PLL_RATE(400000000U, 1, 200, 12, 0, 1), /* 400Mhz */ FRAC_PLL_RATE(300000000U, 1, 150, 12, 0, 1), FRAC_PLL_RATE(233000000U, 1, 174, 18, 3, 4), /* 233Mhz */ + FRAC_PLL_RATE(200000000U, 1, 200, 24, 0, 1), /* 200Mhz */ }; /* return in khz */ @@ -723,7 +726,7 @@ struct imx_clk_setting imx_clk_ld_settings[] = { /* SWO TRACE to 133M */ {SWO_TRACE_CLK_ROOT, SYS_PLL_PFD1_DIV2, 3}, /* M33 systetick to 24M */ - {M33_SYSTICK_CLK_ROOT, OSC_24M_CLK, 1}, + {M33_SYSTICK_CLK_ROOT, OSC_24M_CLK, 1, CLK_SOC_IMX93}, /* NIC to 250M */ {NIC_CLK_ROOT, SYS_PLL_PFD0, 4}, /* NIC_APB to 133M */ @@ -753,13 +756,17 @@ struct imx_clk_setting imx_clk_settings[] = { * WAKEUP_AXI to 312.5M, because of FEC only can support to 320M for * generating MII clock at 2.5M */ - {WAKEUP_AXI_CLK_ROOT, SYS_PLL_PFD2, 2}, + {WAKEUP_AXI_CLK_ROOT, SYS_PLL_PFD2, 2, CLK_SOC_IMX93}, + /* Wakeup AXI 250M*/ + {WAKEUP_AXI_CLK_ROOT, SYS_PLL_PFD0, 4, CLK_SOC_IMX91}, /* SWO TRACE to 133M */ {SWO_TRACE_CLK_ROOT, SYS_PLL_PFD1_DIV2, 3}, /* M33 systetick to 24M */ - {M33_SYSTICK_CLK_ROOT, OSC_24M_CLK, 1}, + {M33_SYSTICK_CLK_ROOT, OSC_24M_CLK, 1, CLK_SOC_IMX93}, /* NIC to 400M */ - {NIC_CLK_ROOT, SYS_PLL_PFD1, 2}, + {NIC_CLK_ROOT, SYS_PLL_PFD1, 2, CLK_SOC_IMX93}, + /* NIC to 333M */ + {NIC_CLK_ROOT, SYS_PLL_PFD0, 3, CLK_SOC_IMX91}, /* NIC_APB to 133M */ {NIC_APB_CLK_ROOT, SYS_PLL_PFD1_DIV2, 3} }; @@ -769,8 +776,12 @@ void bus_clock_init_low_drive(void) int i; for (i = 0; i < ARRAY_SIZE(imx_clk_ld_settings); i++) { - ccm_clk_root_cfg(imx_clk_ld_settings[i].clk_root, - imx_clk_ld_settings[i].src, imx_clk_ld_settings[i].div); + if (imx_clk_ld_settings[i].soc == CLK_SOC_ALL || + (is_imx91() && imx_clk_ld_settings[i].soc == CLK_SOC_IMX91) || + (is_imx93() && imx_clk_ld_settings[i].soc == CLK_SOC_IMX93)) { + ccm_clk_root_cfg(imx_clk_ld_settings[i].clk_root, + imx_clk_ld_settings[i].src, imx_clk_ld_settings[i].div); + } } } @@ -779,8 +790,12 @@ void bus_clock_init(void) int i; for (i = 0; i < ARRAY_SIZE(imx_clk_settings); i++) { - ccm_clk_root_cfg(imx_clk_settings[i].clk_root, - imx_clk_settings[i].src, imx_clk_settings[i].div); + if (imx_clk_settings[i].soc == CLK_SOC_ALL || + (is_imx91() && imx_clk_settings[i].soc == CLK_SOC_IMX91) || + (is_imx93() && imx_clk_settings[i].soc == CLK_SOC_IMX93)) { + ccm_clk_root_cfg(imx_clk_settings[i].clk_root, + imx_clk_settings[i].src, imx_clk_settings[i].div); + } } } @@ -857,7 +872,7 @@ u32 imx_get_fecclk(void) return ccm_clk_root_get_rate(WAKEUP_AXI_CLK_ROOT); } -#if defined(CONFIG_IMX93) && defined(CONFIG_DWC_ETH_QOS) +#if (CONFIG_IS_ENABLED(IMX93) || CONFIG_IS_ENABLED(IMX91)) && CONFIG_IS_ENABLED(DWC_ETH_QOS) static int imx93_eqos_interface_init(struct udevice *dev, phy_interface_t interface_type) { struct blk_ctrl_wakeupmix_regs *bctrl = @@ -901,12 +916,12 @@ static int imx93_eqos_interface_init(struct udevice *dev, phy_interface_t interf int board_interface_eth_init(struct udevice *dev, phy_interface_t interface_type) { - if (IS_ENABLED(CONFIG_IMX93) && + if ((IS_ENABLED(CONFIG_IMX93) || IS_ENABLED(CONFIG_IMX91)) && IS_ENABLED(CONFIG_DWC_ETH_QOS) && device_is_compatible(dev, "nxp,imx93-dwmac-eqos")) return imx93_eqos_interface_init(dev, interface_type); - if (IS_ENABLED(CONFIG_IMX93) && + if ((IS_ENABLED(CONFIG_IMX93) || IS_ENABLED(CONFIG_IMX91)) && IS_ENABLED(CONFIG_FEC_MXC) && device_is_compatible(dev, "fsl,imx93-fec")) return 0; diff --git a/arch/arm/mach-imx/imx9/container.cfg b/arch/arm/mach-imx/imx9/container.cfg index 72fe791eae6..91a973161d1 100644 --- a/arch/arm/mach-imx/imx9/container.cfg +++ b/arch/arm/mach-imx/imx9/container.cfg @@ -6,6 +6,10 @@ BOOT_FROM SD 0x400 SOC_TYPE IMX9 CONTAINER +#ifdef CONFIG_IMX91 +IMAGE A55 bl31.bin 0x204C0000 +#else IMAGE A55 bl31.bin 0x204E0000 +#endif IMAGE A55 u-boot.bin CONFIG_TEXT_BASE -IMAGE A55 tee.bin 0x96000000
\ No newline at end of file +IMAGE A55 tee.bin 0x96000000 diff --git a/arch/arm/mach-imx/imx9/imximage.cfg b/arch/arm/mach-imx/imx9/imximage.cfg index d327d6a6ef4..118dfb3ec79 100644 --- a/arch/arm/mach-imx/imx9/imximage.cfg +++ b/arch/arm/mach-imx/imx9/imximage.cfg @@ -5,6 +5,10 @@ BOOT_FROM SD 0x400 SOC_TYPE IMX9 +#ifdef CONFIG_IMX91 +APPEND mx91a0-ahab-container.img +#else APPEND mx93a1-ahab-container.img +#endif CONTAINER -IMAGE A55 u-boot-spl-ddr.bin 0x2049A000
\ No newline at end of file +IMAGE A55 u-boot-spl-ddr.bin CONFIG_SPL_TEXT_BASE diff --git a/arch/arm/mach-imx/imx9/soc.c b/arch/arm/mach-imx/imx9/soc.c index 21e0e7dd1e8..bb13ca742e3 100644 --- a/arch/arm/mach-imx/imx9/soc.c +++ b/arch/arm/mach-imx/imx9/soc.c @@ -118,6 +118,8 @@ u32 get_cpu_speed_grade_hz(void) if (is_imx93()) max_speed = MHZ(1700); + else if (is_imx91()) + max_speed = MHZ(1400); /* In case the fuse of speed grade not programmed */ if (speed > max_speed) @@ -195,7 +197,30 @@ static u32 get_cpu_variant_type(u32 type) bool npu_disable = !!(val & BIT(13)); bool core1_disable = !!(val & BIT(15)); - u32 pack_9x9_fused = BIT(4) | BIT(17) | BIT(19) | BIT(24); + u32 pack_9x9_fused = BIT(4) | BIT(5) | BIT(17) | BIT(19) | BIT(24); + u32 nxp_recog = (val & GENMASK(23, 16)) >> 16; + + /* For iMX91 */ + if (type == MXC_CPU_IMX91) { + switch (nxp_recog) { + case 0x9: + case 0xA: + type = MXC_CPU_IMX9111; + break; + case 0xD: + case 0xE: + type = MXC_CPU_IMX9121; + break; + case 0xF: + case 0x10: + type = MXC_CPU_IMX9101; + break; + default: + break; /* 9131 as default */ + } + + return type; + } /* Low performance 93 part */ if (((val >> 6) & 0x3F) == 0xE && npu_disable) @@ -217,8 +242,14 @@ static u32 get_cpu_variant_type(u32 type) u32 get_cpu_rev(void) { u32 rev = (gd->arch.soc_rev >> 24) - 0xa0; + u32 type; - return (get_cpu_variant_type(MXC_CPU_IMX93) << 12) | + if ((gd->arch.soc_rev & 0xFFFF) == 0x9300) + type = MXC_CPU_IMX93; + else + type = MXC_CPU_IMX91; + + return (get_cpu_variant_type(type) << 12) | (CHIP_REV_1_0 + rev); } @@ -539,7 +570,8 @@ int print_cpuinfo(void) cpurev = get_cpu_rev(); - printf("CPU: i.MX93 rev%d.%d\n", (cpurev & 0x000F0) >> 4, (cpurev & 0x0000F) >> 0); + printf("CPU: i.MX%s rev%d.%d\n", is_imx93() ? "93" : "91", + (cpurev & 0x000F0) >> 4, (cpurev & 0x0000F) >> 0); return 0; } @@ -634,7 +666,7 @@ static int low_drive_freq_update(void *blob) return 0; } -#ifdef CONFIG_OF_BOARD_FIXUP +#if defined(CONFIG_OF_BOARD_FIXUP) && !defined(CONFIG_TARGET_PHYCORE_IMX93) #ifndef CONFIG_XPL_BUILD int board_fix_fdt(void *fdt) { @@ -893,7 +925,9 @@ void disable_isolation(void) void soc_power_init(void) { mix_power_init(MIX_PD_MEDIAMIX); - mix_power_init(MIX_PD_MLMIX); + + if (is_imx93()) + mix_power_init(MIX_PD_MLMIX); disable_isolation(); } @@ -919,6 +953,9 @@ int m33_prepare(void) (struct blk_ctrl_s_aonmix_regs *)BLK_CTRL_S_ANOMIX_BASE_ADDR; u32 val, i; + if (is_imx91()) + return -ENODEV; + if (m33_is_rom_kicked()) return -EPERM; @@ -1007,7 +1044,7 @@ enum imx9_soc_voltage_mode soc_target_voltage_mode(void) u32 speed = get_cpu_speed_grade_hz(); enum imx9_soc_voltage_mode voltage = VOLT_OVER_DRIVE; - if (is_imx93()) { + if (is_imx93() || is_imx91()) { if (speed == 1700000000) voltage = VOLT_OVER_DRIVE; else if (speed == 1400000000) diff --git a/arch/arm/mach-imx/imx9/trdc.c b/arch/arm/mach-imx/imx9/trdc.c index ef0f8b52a4d..d7593ec2718 100644 --- a/arch/arm/mach-imx/imx9/trdc.c +++ b/arch/arm/mach-imx/imx9/trdc.c @@ -484,7 +484,7 @@ void trdc_init(void) } } -#if DEBUG +#ifdef DEBUG int trdc_mbc_control_dump(ulong trdc_reg, u32 mbc_x, u32 glbac_id) { struct trdc_mbc *mbc_base = (struct trdc_mbc *)trdc_get_mbc_base(trdc_reg, mbc_x); diff --git a/arch/arm/mach-k3/am62ax/Makefile b/arch/arm/mach-k3/am62ax/Makefile index e2ef88196f8..4e35e0c844d 100644 --- a/arch/arm/mach-k3/am62ax/Makefile +++ b/arch/arm/mach-k3/am62ax/Makefile @@ -5,3 +5,4 @@ obj-$(CONFIG_OF_SYSTEM_SETUP) += am62a7_fdt.o obj-$(CONFIG_XPL_BUILD) += am62a7_init.o +obj-y += boot.o diff --git a/arch/arm/mach-k3/am62ax/am62a7_init.c b/arch/arm/mach-k3/am62ax/am62a7_init.c index 0f62f39075b..5c0d3ee6869 100644 --- a/arch/arm/mach-k3/am62ax/am62a7_init.c +++ b/arch/arm/mach-k3/am62ax/am62a7_init.c @@ -171,102 +171,7 @@ void board_init_f(ulong dummy) debug("am62a_init: %s done\n", __func__); } -static u32 __get_backup_bootmedia(u32 devstat) -{ - u32 bkup_bootmode = (devstat & MAIN_DEVSTAT_BACKUP_BOOTMODE_MASK) >> - MAIN_DEVSTAT_BACKUP_BOOTMODE_SHIFT; - u32 bkup_bootmode_cfg = - (devstat & MAIN_DEVSTAT_BACKUP_BOOTMODE_CFG_MASK) >> - MAIN_DEVSTAT_BACKUP_BOOTMODE_CFG_SHIFT; - - switch (bkup_bootmode) { - case BACKUP_BOOT_DEVICE_UART: - return BOOT_DEVICE_UART; - - case BACKUP_BOOT_DEVICE_USB: - return BOOT_DEVICE_USB; - - case BACKUP_BOOT_DEVICE_ETHERNET: - return BOOT_DEVICE_ETHERNET; - - case BACKUP_BOOT_DEVICE_MMC: - if (bkup_bootmode_cfg) - return BOOT_DEVICE_MMC2; - return BOOT_DEVICE_MMC1; - - case BACKUP_BOOT_DEVICE_SPI: - return BOOT_DEVICE_SPI; - - case BACKUP_BOOT_DEVICE_I2C: - return BOOT_DEVICE_I2C; - - case BACKUP_BOOT_DEVICE_DFU: - if (bkup_bootmode_cfg & MAIN_DEVSTAT_BACKUP_USB_MODE_MASK) - return BOOT_DEVICE_USB; - return BOOT_DEVICE_DFU; - }; - - return BOOT_DEVICE_RAM; -} - -static u32 __get_primary_bootmedia(u32 devstat) -{ - u32 bootmode = (devstat & MAIN_DEVSTAT_PRIMARY_BOOTMODE_MASK) >> - MAIN_DEVSTAT_PRIMARY_BOOTMODE_SHIFT; - u32 bootmode_cfg = (devstat & MAIN_DEVSTAT_PRIMARY_BOOTMODE_CFG_MASK) >> - MAIN_DEVSTAT_PRIMARY_BOOTMODE_CFG_SHIFT; - - switch (bootmode) { - case BOOT_DEVICE_OSPI: - fallthrough; - case BOOT_DEVICE_QSPI: - fallthrough; - case BOOT_DEVICE_XSPI: - fallthrough; - case BOOT_DEVICE_SPI: - return BOOT_DEVICE_SPI; - - case BOOT_DEVICE_ETHERNET_RGMII: - fallthrough; - case BOOT_DEVICE_ETHERNET_RMII: - return BOOT_DEVICE_ETHERNET; - - case BOOT_DEVICE_EMMC: - return BOOT_DEVICE_MMC1; - - case BOOT_DEVICE_SPI_NAND: - return BOOT_DEVICE_SPINAND; - - case BOOT_DEVICE_MMC: - if ((bootmode_cfg & MAIN_DEVSTAT_PRIMARY_MMC_PORT_MASK) >> - MAIN_DEVSTAT_PRIMARY_MMC_PORT_SHIFT) - return BOOT_DEVICE_MMC2; - return BOOT_DEVICE_MMC1; - - case BOOT_DEVICE_DFU: - if ((bootmode_cfg & MAIN_DEVSTAT_PRIMARY_USB_MODE_MASK) >> - MAIN_DEVSTAT_PRIMARY_USB_MODE_SHIFT) - return BOOT_DEVICE_USB; - return BOOT_DEVICE_DFU; - - case BOOT_DEVICE_NOBOOT: - return BOOT_DEVICE_RAM; - } - - return bootmode; -} - u32 spl_boot_device(void) { - u32 devstat = readl(CTRLMMR_MAIN_DEVSTAT); - u32 bootmedia; - - if (bootindex == K3_PRIMARY_BOOTMODE) - bootmedia = __get_primary_bootmedia(devstat); - else - bootmedia = __get_backup_bootmedia(devstat); - - debug("am62a_init: %s: devstat = 0x%x bootmedia = 0x%x bootindex = %d\n", - __func__, devstat, bootmedia, bootindex); - return bootmedia; + return get_boot_device(); } diff --git a/arch/arm/mach-k3/am62ax/boot.c b/arch/arm/mach-k3/am62ax/boot.c new file mode 100644 index 00000000000..af7fce1e5e9 --- /dev/null +++ b/arch/arm/mach-k3/am62ax/boot.c @@ -0,0 +1,106 @@ +// SPDX-License-Identifier: GPL-2.0+ +#include <asm/io.h> +#include <asm/arch/hardware.h> +#include <asm/arch/am62a_spl.h> + +static u32 __get_backup_bootmedia(u32 devstat) +{ + u32 bkup_bootmode = (devstat & MAIN_DEVSTAT_BACKUP_BOOTMODE_MASK) >> + MAIN_DEVSTAT_BACKUP_BOOTMODE_SHIFT; + u32 bkup_bootmode_cfg = + (devstat & MAIN_DEVSTAT_BACKUP_BOOTMODE_CFG_MASK) >> + MAIN_DEVSTAT_BACKUP_BOOTMODE_CFG_SHIFT; + + switch (bkup_bootmode) { + case BACKUP_BOOT_DEVICE_UART: + return BOOT_DEVICE_UART; + + case BACKUP_BOOT_DEVICE_USB: + return BOOT_DEVICE_USB; + + case BACKUP_BOOT_DEVICE_ETHERNET: + return BOOT_DEVICE_ETHERNET; + + case BACKUP_BOOT_DEVICE_MMC: + if (bkup_bootmode_cfg) + return BOOT_DEVICE_MMC2; + return BOOT_DEVICE_MMC1; + + case BACKUP_BOOT_DEVICE_SPI: + return BOOT_DEVICE_SPI; + + case BACKUP_BOOT_DEVICE_I2C: + return BOOT_DEVICE_I2C; + + case BACKUP_BOOT_DEVICE_DFU: + if (bkup_bootmode_cfg & MAIN_DEVSTAT_BACKUP_USB_MODE_MASK) + return BOOT_DEVICE_USB; + return BOOT_DEVICE_DFU; + }; + + return BOOT_DEVICE_RAM; +} + +static u32 __get_primary_bootmedia(u32 devstat) +{ + u32 bootmode = (devstat & MAIN_DEVSTAT_PRIMARY_BOOTMODE_MASK) >> + MAIN_DEVSTAT_PRIMARY_BOOTMODE_SHIFT; + u32 bootmode_cfg = (devstat & MAIN_DEVSTAT_PRIMARY_BOOTMODE_CFG_MASK) >> + MAIN_DEVSTAT_PRIMARY_BOOTMODE_CFG_SHIFT; + + switch (bootmode) { + case BOOT_DEVICE_OSPI: + fallthrough; + case BOOT_DEVICE_QSPI: + fallthrough; + case BOOT_DEVICE_XSPI: + fallthrough; + case BOOT_DEVICE_SPI: + return BOOT_DEVICE_SPI; + + case BOOT_DEVICE_ETHERNET_RGMII: + fallthrough; + case BOOT_DEVICE_ETHERNET_RMII: + return BOOT_DEVICE_ETHERNET; + + case BOOT_DEVICE_EMMC: + return BOOT_DEVICE_MMC1; + + case BOOT_DEVICE_SPI_NAND: + return BOOT_DEVICE_SPINAND; + + case BOOT_DEVICE_MMC: + if ((bootmode_cfg & MAIN_DEVSTAT_PRIMARY_MMC_PORT_MASK) >> + MAIN_DEVSTAT_PRIMARY_MMC_PORT_SHIFT) + return BOOT_DEVICE_MMC2; + return BOOT_DEVICE_MMC1; + + case BOOT_DEVICE_DFU: + if ((bootmode_cfg & MAIN_DEVSTAT_PRIMARY_USB_MODE_MASK) >> + MAIN_DEVSTAT_PRIMARY_USB_MODE_SHIFT) + return BOOT_DEVICE_USB; + return BOOT_DEVICE_DFU; + + case BOOT_DEVICE_NOBOOT: + return BOOT_DEVICE_RAM; + } + + return bootmode; +} + +u32 get_boot_device(void) +{ + u32 devstat = readl(CTRLMMR_MAIN_DEVSTAT); + u32 bootmode = *(u32 *)(K3_BOOT_PARAM_TABLE_INDEX_OCRAM); + u32 bootmedia; + + if (bootmode == K3_PRIMARY_BOOTMODE) + bootmedia = __get_primary_bootmedia(devstat); + else + bootmedia = __get_backup_bootmedia(devstat); + + debug("%s: devstat = 0x%x bootmedia = 0x%x bootmode = %d\n", + __func__, devstat, bootmedia, bootmode); + + return bootmedia; +} diff --git a/arch/arm/mach-k3/am62px/am62p5_init.c b/arch/arm/mach-k3/am62px/am62p5_init.c index 34ed01cd78c..2d35a7ce77e 100644 --- a/arch/arm/mach-k3/am62px/am62p5_init.c +++ b/arch/arm/mach-k3/am62px/am62p5_init.c @@ -159,6 +159,8 @@ void board_init_f(ulong dummy) } spl_enable_cache(); + + setup_qos(); debug("am62px_init: %s done\n", __func__); } diff --git a/arch/arm/mach-k3/am62x/Kconfig b/arch/arm/mach-k3/am62x/Kconfig index 8b0cdd74f4f..81199ada3a1 100644 --- a/arch/arm/mach-k3/am62x/Kconfig +++ b/arch/arm/mach-k3/am62x/Kconfig @@ -42,6 +42,7 @@ config TARGET_PHYCORE_AM62X_R5 select SPL_RAM select K3_DDRSS select BINMAN + select PHYTEC_K3_DDR_PATCH imply SYS_K3_SPL_ATF config TARGET_VERDIN_AM62_A53 diff --git a/arch/arm/mach-k3/am65x/Kconfig b/arch/arm/mach-k3/am65x/Kconfig index f17b641e136..72a8298aebf 100644 --- a/arch/arm/mach-k3/am65x/Kconfig +++ b/arch/arm/mach-k3/am65x/Kconfig @@ -16,6 +16,7 @@ config TARGET_AM654_A53_EVM select BOARD_LATE_INIT select BINMAN imply TI_I2C_BOARD_DETECT + select OF_UPSTREAM config TARGET_AM654_R5_EVM bool "TI K3 based AM654 EVM running on R5" diff --git a/arch/arm/mach-k3/include/mach/j721e_hardware.h b/arch/arm/mach-k3/include/mach/j721e_hardware.h index 0ba37c9ec7d..2b5ec771e18 100644 --- a/arch/arm/mach-k3/include/mach/j721e_hardware.h +++ b/arch/arm/mach-k3/include/mach/j721e_hardware.h @@ -28,7 +28,7 @@ #define CTRLMMR_WKUP_DEVSTAT (WKUP_CTRL_MMR0_BASE + 0x30) #define WKUP_DEVSTAT_PRIMARY_BOOTMODE_MASK GENMASK(5, 3) #define WKUP_DEVSTAT_PRIMARY_BOOTMODE_SHIFT 3 -#define WKUP_DEVSTAT_MCU_OMLY_MASK BIT(6) +#define WKUP_DEVSTAT_MCU_ONLY_MASK BIT(6) #define WKUP_DEVSTAT_MCU_ONLY_SHIFT 6 /* ROM HANDOFF Structure location */ diff --git a/arch/arm/mach-k3/include/mach/j721s2_hardware.h b/arch/arm/mach-k3/include/mach/j721s2_hardware.h index 5aa2282f59a..8daea82a77e 100644 --- a/arch/arm/mach-k3/include/mach/j721s2_hardware.h +++ b/arch/arm/mach-k3/include/mach/j721s2_hardware.h @@ -28,7 +28,7 @@ #define CTRLMMR_WKUP_DEVSTAT (WKUP_CTRL_MMR0_BASE + 0x30) #define WKUP_DEVSTAT_PRIMARY_BOOTMODE_MASK GENMASK(5, 3) #define WKUP_DEVSTAT_PRIMARY_BOOTMODE_SHIFT 3 -#define WKUP_DEVSTAT_MCU_OMLY_MASK BIT(6) +#define WKUP_DEVSTAT_MCU_ONLY_MASK BIT(6) #define WKUP_DEVSTAT_MCU_ONLY_SHIFT 6 /* ROM HANDOFF Structure location */ diff --git a/arch/arm/mach-k3/include/mach/j722s_spl.h b/arch/arm/mach-k3/include/mach/j722s_spl.h index eab8c511b7c..a91cc82448f 100644 --- a/arch/arm/mach-k3/include/mach/j722s_spl.h +++ b/arch/arm/mach-k3/include/mach/j722s_spl.h @@ -24,6 +24,7 @@ #define BOOT_DEVICE_DFU 0x0A #define BOOT_DEVICE_GPMC_NAND 0x0B #define BOOT_DEVICE_GPMC_NOR 0x0C +#define BOOT_DEVICE_FAST_XSPI 0x0D #define BOOT_DEVICE_XSPI 0x0E #define BOOT_DEVICE_NOBOOT 0x0F diff --git a/arch/arm/mach-k3/j721e/j721e_init.c b/arch/arm/mach-k3/j721e/j721e_init.c index e9ed8cb267c..7e2d2c16b45 100644 --- a/arch/arm/mach-k3/j721e/j721e_init.c +++ b/arch/arm/mach-k3/j721e/j721e_init.c @@ -19,6 +19,7 @@ #include <fdtdec.h> #include <mmc.h> #include <remoteproc.h> +#include <k3-avs.h> #include "../sysfw-loader.h" #include "../common.h" @@ -39,6 +40,12 @@ #define NB_THREADMAP_BIT0 BIT(0) #define NB_THREADMAP_BIT1 BIT(1) +/* TISCI DEV ID for A72, MSMC Clock */ +#define DEV_A72SS0_CORE0_0_ID 202 +#define DEV_A72SS0_CORE0_0_ARM_CLK_CLK_ID 2 +#define DEV_A72SS0_CORE0_ID 4 +#define DEV_A72SS0_CORE0_MSMC_CLK_ID 1 + #ifdef CONFIG_K3_LOAD_SYSFW struct fwl_data cbass_hc_cfg0_fwls[] = { #if defined(CONFIG_TARGET_J721E_R5_EVM) @@ -147,6 +154,78 @@ static void setup_navss_nb(void) writel(NB_THREADMAP_BIT1, (uintptr_t)NAVSS0_NBSS_NB1_CFG_NB_THREADMAP); } +#if defined(CONFIG_CPU_V7R) && defined(CONFIG_K3_AVS0) +static int get_clock_index_by_dev_id(ofnode node, u32 dev_id, u32 clk_id) +{ + ofnode clknode; + int count, i; + struct ofnode_phandle_args phandle_args; + + clknode = ofnode_by_compatible(ofnode_null(), "ti,k2g-sci-clk"); + if (!ofnode_valid(clknode)) { + printf("%s: clock-controller not found\n", __func__); + return -ENODEV; + } + + count = ofnode_count_phandle_with_args(node, "assigned-clocks", "#clock-cells", 0); + for (i = 0; i < count; i++) { + if (ofnode_parse_phandle_with_args(node, "assigned-clocks", + "#clock-cells", 0, i, &phandle_args)) { + printf("%s: Could not parse assigned-clocks at index %d\n", __func__, i); + continue; + } + if (ofnode_equal(clknode, phandle_args.node) && + phandle_args.args[0] == dev_id && phandle_args.args[1] == clk_id) + return i; + } + return -1; +} + +static int fdt_fixup_a72ss_clock_frequency(void) +{ + int index, size; + u32 *rates; + ofnode node; + + node = ofnode_by_compatible(ofnode_null(), "ti,am654-rproc"); + if (!ofnode_valid(node)) { + printf("%s: A72 not found\n", __func__); + return -ENODEV; + } + + rates = fdt_getprop_w(ofnode_to_fdt(node), ofnode_to_offset(node), + "assigned-clock-rates", &size); + if (!rates) { + printf("%s: Wrong A72 assigned-clocks-rates configuration\n", __func__); + return -1; + } + + /* Update A72 Clock Frequency to OPP_LOW spec */ + index = get_clock_index_by_dev_id(node, + DEV_A72SS0_CORE0_0_ID, + DEV_A72SS0_CORE0_0_ARM_CLK_CLK_ID); + if (index < 0 || index >= (size / sizeof(u32))) { + printf("%s: Wrong A72 assigned-clocks configuration\n", __func__); + return -1; + } + rates[index] = cpu_to_fdt32(1000000000); + printf("Changed A72 CPU frequency to %dHz in DT\n", 1000000000); + + /* Update MSMC Clock Frequency to OPP_LOW spec */ + index = get_clock_index_by_dev_id(node, + DEV_A72SS0_CORE0_ID, + DEV_A72SS0_CORE0_MSMC_CLK_ID); + if (index < 0 || index >= (size / sizeof(u32))) { + printf("%s: Wrong A72 assigned-clocks configuration\n", __func__); + return -1; + } + rates[index] = cpu_to_fdt32(500000000); + printf("Changed MSMC frequency to %dHz in DT\n", 500000000); + + return 0; +} +#endif + /* * This uninitialized global variable would normal end up in the .bss section, * but the .bss is cleared between writing and reading this variable, so move @@ -301,8 +380,19 @@ void board_init_f(ulong dummy) #if defined(CONFIG_CPU_V7R) && defined(CONFIG_K3_AVS0) ret = uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(k3_avs), &dev); - if (ret) + if (ret) { printf("AVS init failed: %d\n", ret); + } else if (IS_ENABLED(CONFIG_K3_OPP_LOW)) { + ret = k3_avs_check_opp(dev, J721E_VDD_MPU, AM6_OPP_LOW); + if (ret) { + printf("OPP_LOW: k3_avs_check_opp failed: %d\n", ret); + } else { + ret = fdt_fixup_a72ss_clock_frequency(); + if (ret) + printf("OPP_LOW: fdt_fixup_a72ss_clock_frequency failed: %d\n", + ret); + } + } #endif #if defined(CONFIG_K3_J721E_DDRSS) @@ -406,7 +496,7 @@ u32 spl_boot_device(void) u32 wkup_devstat = readl(CTRLMMR_WKUP_DEVSTAT); u32 main_devstat; - if (wkup_devstat & WKUP_DEVSTAT_MCU_OMLY_MASK) { + if (wkup_devstat & WKUP_DEVSTAT_MCU_ONLY_MASK) { printf("ERROR: MCU only boot is not yet supported\n"); return BOOT_DEVICE_RAM; } diff --git a/arch/arm/mach-k3/j721s2/j721s2_init.c b/arch/arm/mach-k3/j721s2/j721s2_init.c index 6ce3eb87efb..5941fa26a95 100644 --- a/arch/arm/mach-k3/j721s2/j721s2_init.c +++ b/arch/arm/mach-k3/j721s2/j721s2_init.c @@ -407,7 +407,7 @@ u32 spl_boot_device(void) u32 wkup_devstat = readl(CTRLMMR_WKUP_DEVSTAT); u32 main_devstat; - if (wkup_devstat & WKUP_DEVSTAT_MCU_OMLY_MASK) { + if (wkup_devstat & WKUP_DEVSTAT_MCU_ONLY_MASK) { printf("ERROR: MCU only boot is not yet supported\n"); return BOOT_DEVICE_RAM; } diff --git a/arch/arm/mach-k3/j722s/j722s_init.c b/arch/arm/mach-k3/j722s/j722s_init.c index 01b00681f68..f8c5c2a5edc 100644 --- a/arch/arm/mach-k3/j722s/j722s_init.c +++ b/arch/arm/mach-k3/j722s/j722s_init.c @@ -165,6 +165,7 @@ void board_init_f(ulong dummy) { k3_spl_init(); k3_mem_init(); + setup_qos(); } static u32 __get_backup_bootmedia(u32 devstat) @@ -219,6 +220,8 @@ static u32 __get_primary_bootmedia(u32 devstat) fallthrough; case BOOT_DEVICE_XSPI: fallthrough; + case BOOT_DEVICE_FAST_XSPI: + fallthrough; case BOOT_DEVICE_SPI: return BOOT_DEVICE_SPI; diff --git a/arch/arm/mach-k3/j784s4/j784s4_init.c b/arch/arm/mach-k3/j784s4/j784s4_init.c index 07b5d7d7504..8a41cd3bb50 100644 --- a/arch/arm/mach-k3/j784s4/j784s4_init.c +++ b/arch/arm/mach-k3/j784s4/j784s4_init.c @@ -233,9 +233,19 @@ void k3_mem_init(void) void board_init_f(ulong dummy) { + struct udevice *dev; + int ret; + k3_spl_init(); k3_mem_init(); + if (IS_ENABLED(CONFIG_CPU_V7R) && IS_ENABLED(CONFIG_K3_AVS0)) { + ret = uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(k3_avs), + &dev); + if (ret) + printf("AVS init failed: %d\n", ret); + } + if (IS_ENABLED(CONFIG_CPU_V7R)) setup_navss_nb(); diff --git a/arch/arm/mach-k3/r5/Kconfig b/arch/arm/mach-k3/r5/Kconfig index 878087fbf56..12335880e10 100644 --- a/arch/arm/mach-k3/r5/Kconfig +++ b/arch/arm/mach-k3/r5/Kconfig @@ -1,6 +1,13 @@ config K3_LOAD_SYSFW bool +config K3_OPP_LOW + depends on ARCH_K3 && K3_AVS0 + bool "Enable OPP_LOW on supported TI K3 SoCs" + help + Enabling this will allow Socs with the proper efuse to run at a lower + MPU core voltage and adjust frequency according to SoC TRM + config K3_QOS bool "Enable Quality of Service (QoS) Settings for TI K3 SoCs" default y if SOC_K3_AM62A7 diff --git a/arch/arm/mach-k3/r5/am62px/Makefile b/arch/arm/mach-k3/r5/am62px/Makefile index 091d4fa5b45..066c3cef8d1 100644 --- a/arch/arm/mach-k3/r5/am62px/Makefile +++ b/arch/arm/mach-k3/r5/am62px/Makefile @@ -4,3 +4,4 @@ obj-y += clk-data.o obj-y += dev-data.o +obj-y += am62p_qos_uboot.o diff --git a/arch/arm/mach-k3/r5/am62px/am62p_qos.h b/arch/arm/mach-k3/r5/am62px/am62p_qos.h new file mode 100644 index 00000000000..99e2ee48562 --- /dev/null +++ b/arch/arm/mach-k3/r5/am62px/am62p_qos.h @@ -0,0 +1,42 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Keystone3 Quality of service endpoint definitions + * Auto generated by K3 Resource Partitioning Tool + * + * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/ + */ + +#define PULSAR_UL_WKUP_0_CPU0_RMST 0x45D14000 +#define PULSAR_UL_WKUP_0_CPU0_WMST 0x45D14400 +#define PULSAR_UL_WKUP_0_CPU0_PMST 0x45D14800 +#define PULSAR_UL_MAIN_0_CPU0_RMST 0x45D15000 +#define PULSAR_UL_MAIN_0_CPU0_WMST 0x45D15400 +#define PULSAR_UL_MAIN_0_CPU0_PMST 0x45D15800 +#define PULSAR_ULS_MCU_0_CPU0_RMST 0x45D18000 +#define PULSAR_ULS_MCU_0_CPU0_WMST 0x45D18400 +#define PULSAR_ULS_MCU_0_CPU0_PMST 0x45D18800 +#define SAM62A_A53_512KB_WRAP_MAIN_0_A53_QUAD_WRAP_CBA_AXI_R 0x45D20400 +#define SAM62A_A53_512KB_WRAP_MAIN_0_A53_QUAD_WRAP_CBA_AXI_W 0x45D20800 +#define DEBUGSS_K3_WRAP_CV0_MAIN_0_VBUSMW 0x45D21800 +#define DEBUGSS_K3_WRAP_CV0_MAIN_0_VBUSMR 0x45D21C00 +#define GIC500SS_1_4_MAIN_0_MEM_WR_VBUSM 0x45D22000 +#define GIC500SS_1_4_MAIN_0_MEM_RD_VBUSM 0x45D22400 +#define EMMCSD4SS_MAIN_0_EMMCSDSS_RD 0x45D23000 +#define EMMCSD4SS_MAIN_0_EMMCSDSS_WR 0x45D23400 +#define EMMCSD4SS_MAIN_1_EMMCSDSS_WR 0x45D23800 +#define EMMCSD4SS_MAIN_1_EMMCSDSS_RD 0x45D23C00 +#define SA3SS_AM62A_MAIN_0_CTXCACH_EXT_DMA 0x45D25400 +#define K3_VPU_WAVE521CL_MAIN_0_PRI_M_VBUSM_R_ASYNC 0x45D26800 +#define K3_VPU_WAVE521CL_MAIN_0_PRI_M_VBUSM_W_ASYNC 0x45D26C00 +#define K3_VPU_WAVE521CL_MAIN_0_SEC_M_VBUSM_R_ASYNC 0x45D27000 +#define K3_VPU_WAVE521CL_MAIN_0_SEC_M_VBUSM_W_ASYNC 0x45D27400 +#define SAM67_GPU_BXS464_WRAP_MAIN_0_M_VBUSM_W_SYNC 0x45D29800 +#define SAM67_GPU_BXS464_WRAP_MAIN_0_M_VBUSM_R_SYNC 0x45D2A000 +#define K3_DSS_UL_MAIN_0_VBUSM_DMA 0x45D30000 +#define K3_DSS_UL_MAIN_1_VBUSM_DMA 0x45D30400 +#define USB2SS_16FFC_MAIN_0_MSTR0 0x45D34000 +#define USB2SS_16FFC_MAIN_0_MSTW0 0x45D34400 +#define EMMC8SS_16FFC_MAIN_0_EMMCSS_WR 0x45D34800 +#define EMMC8SS_16FFC_MAIN_0_EMMCSS_RD 0x45D34C00 +#define USB2SS_16FFC_MAIN_1_MSTR0 0x45D35000 +#define USB2SS_16FFC_MAIN_1_MSTW0 0x45D35400 diff --git a/arch/arm/mach-k3/r5/am62px/am62p_qos_uboot.c b/arch/arm/mach-k3/r5/am62px/am62p_qos_uboot.c new file mode 100644 index 00000000000..d25512a038f --- /dev/null +++ b/arch/arm/mach-k3/r5/am62px/am62p_qos_uboot.c @@ -0,0 +1,58 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * am62p Quality of Service (QoS) Configuration Data + * + * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/ + */ + +#include <asm/arch/k3-qos.h> +#include "am62p_qos.h" + +struct k3_qos_data qos_data[] = { + /* modules_qosConfig0 - 1 endpoints, 4 channels */ + { + .reg = K3_QOS_REG(K3_DSS_UL_MAIN_0_VBUSM_DMA, 0), + .val = K3_QOS_VAL(0, 15, 0, 0, 0, 0), + }, + { + .reg = K3_QOS_REG(K3_DSS_UL_MAIN_0_VBUSM_DMA, 1), + .val = K3_QOS_VAL(0, 15, 0, 0, 0, 0), + }, + { + .reg = K3_QOS_REG(K3_DSS_UL_MAIN_0_VBUSM_DMA, 2), + .val = K3_QOS_VAL(0, 15, 0, 0, 0, 0), + }, + { + .reg = K3_QOS_REG(K3_DSS_UL_MAIN_0_VBUSM_DMA, 3), + .val = K3_QOS_VAL(0, 15, 0, 0, 0, 0), + }, + + /* modules_qosConfig1 - 1 endpoints, 4 channels */ + { + .reg = K3_QOS_REG(K3_DSS_UL_MAIN_1_VBUSM_DMA, 0), + .val = K3_QOS_VAL(0, 15, 0, 0, 0, 0), + }, + { + .reg = K3_QOS_REG(K3_DSS_UL_MAIN_1_VBUSM_DMA, 1), + .val = K3_QOS_VAL(0, 15, 0, 0, 0, 0), + }, + { + .reg = K3_QOS_REG(K3_DSS_UL_MAIN_1_VBUSM_DMA, 2), + .val = K3_QOS_VAL(0, 15, 0, 0, 0, 0), + }, + { + .reg = K3_QOS_REG(K3_DSS_UL_MAIN_1_VBUSM_DMA, 3), + .val = K3_QOS_VAL(0, 15, 0, 0, 0, 0), + }, + + /* Following registers set 1:1 mapping for orderID MAP1/MAP2 + * remap registers. orderID x is remapped to orderID x again + * This is to ensure orderID from MAP register is unchanged + */ + + /* K3_DSS_UL_MAIN_0_VBUSM_DMA - 0 groups */ + + /* K3_DSS_UL_MAIN_1_VBUSM_DMA - 0 groups */ +}; + +u32 qos_count = ARRAY_SIZE(qos_data); diff --git a/arch/arm/mach-k3/r5/j722s/Makefile b/arch/arm/mach-k3/r5/j722s/Makefile index 2a0dbf5f5a8..2f0b35a41e8 100644 --- a/arch/arm/mach-k3/r5/j722s/Makefile +++ b/arch/arm/mach-k3/r5/j722s/Makefile @@ -4,3 +4,4 @@ obj-y += clk-data.o obj-y += dev-data.o +obj-y += j722s_qos_uboot.o diff --git a/arch/arm/mach-k3/r5/j722s/j722s_qos.h b/arch/arm/mach-k3/r5/j722s/j722s_qos.h new file mode 100644 index 00000000000..88fa208322f --- /dev/null +++ b/arch/arm/mach-k3/r5/j722s/j722s_qos.h @@ -0,0 +1,51 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Keystone3 Quality of service endpoint definitions + * Auto generated by K3 Resource Partitioning Tool + * + * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/ + */ + +#define PULSAR_UL_WKUP_0_CPU0_RMST 0x45D14000 +#define PULSAR_UL_WKUP_0_CPU0_WMST 0x45D14400 +#define PULSAR_UL_WKUP_0_CPU0_PMST 0x45D14800 +#define PULSAR_UL_MAIN_0_CPU0_RMST 0x45D15000 +#define PULSAR_UL_MAIN_0_CPU0_WMST 0x45D15400 +#define PULSAR_UL_MAIN_0_CPU0_PMST 0x45D15800 +#define PULSAR_ULS_MCU_0_CPU0_RMST 0x45D18000 +#define PULSAR_ULS_MCU_0_CPU0_WMST 0x45D18400 +#define PULSAR_ULS_MCU_0_CPU0_PMST 0x45D18800 +#define SAM62A_A53_512KB_WRAP_MAIN_0_A53_QUAD_WRAP_CBA_AXI_R 0x45D20400 +#define SAM62A_A53_512KB_WRAP_MAIN_0_A53_QUAD_WRAP_CBA_AXI_W 0x45D20800 +#define DEBUGSS_K3_WRAP_CV0_MAIN_0_VBUSMW 0x45D21800 +#define DEBUGSS_K3_WRAP_CV0_MAIN_0_VBUSMR 0x45D21C00 +#define GIC500SS_1_4_MAIN_0_MEM_WR_VBUSM 0x45D22000 +#define GIC500SS_1_4_MAIN_0_MEM_RD_VBUSM 0x45D22400 +#define EMMCSD4SS_MAIN_0_EMMCSDSS_RD 0x45D23000 +#define EMMCSD4SS_MAIN_0_EMMCSDSS_WR 0x45D23400 +#define EMMCSD4SS_MAIN_1_EMMCSDSS_WR 0x45D23800 +#define EMMCSD4SS_MAIN_1_EMMCSDSS_RD 0x45D23C00 +#define USB3P0SS64_16FFC_MAIN_0_MSTR0 0x45D24800 +#define USB3P0SS64_16FFC_MAIN_0_MSTW0 0x45D24C00 +#define SA3SS_AM62A_MAIN_0_CTXCACH_EXT_DMA 0x45D25400 +#define K3_JPGENC_E5010_MAIN_0_M_VBUSM_W 0x45D25800 +#define K3_JPGENC_E5010_MAIN_0_M_VBUSM_R 0x45D25C00 +#define K3_VPU_WAVE521CL_MAIN_0_PRI_M_VBUSM_R_ASYNC 0x45D26800 +#define K3_VPU_WAVE521CL_MAIN_0_PRI_M_VBUSM_W_ASYNC 0x45D26C00 +#define K3_VPU_WAVE521CL_MAIN_0_SEC_M_VBUSM_R_ASYNC 0x45D27000 +#define K3_VPU_WAVE521CL_MAIN_0_SEC_M_VBUSM_W_ASYNC 0x45D27400 +#define SAM67_C7XV_WRAP_MAIN_0_C7XV_SOC 0x45D27800 +#define SAM67_VPAC_WRAP_MAIN_0_LDC0_M_MST 0x45D28000 +#define PCIE_G2X1_64_MAIN_0_PCIE_MST_RD 0x45D29000 +#define PCIE_G2X1_64_MAIN_0_PCIE_MST_WR 0x45D29400 +#define SAM67_GPU_BXS464_WRAP_MAIN_0_M_VBUSM_W_SYNC 0x45D29800 +#define SAM67_GPU_BXS464_WRAP_MAIN_0_M_VBUSM_R_SYNC 0x45D2A000 +#define SAM67_C7XV_WRAP_MAIN_1_C7XV_SOC 0x45D2C000 +#define K3_DSS_UL_MAIN_0_VBUSM_DMA 0x45D30000 +#define K3_DSS_UL_MAIN_1_VBUSM_DMA 0x45D30400 +#define USB2SS_16FFC_MAIN_0_MSTR0 0x45D34000 +#define USB2SS_16FFC_MAIN_0_MSTW0 0x45D34400 +#define EMMC8SS_16FFC_MAIN_0_EMMCSS_WR 0x45D34800 +#define EMMC8SS_16FFC_MAIN_0_EMMCSS_RD 0x45D34C00 +#define USB2SS_16FFC_MAIN_1_MSTR0 0x45D35000 +#define USB2SS_16FFC_MAIN_1_MSTW0 0x45D35400 diff --git a/arch/arm/mach-k3/r5/j722s/j722s_qos_uboot.c b/arch/arm/mach-k3/r5/j722s/j722s_qos_uboot.c new file mode 100644 index 00000000000..1d59f49252e --- /dev/null +++ b/arch/arm/mach-k3/r5/j722s/j722s_qos_uboot.c @@ -0,0 +1,58 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * j722s Quality of Service (QoS) Configuration Data + * + * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/ + */ + +#include <asm/arch/k3-qos.h> +#include "j722s_qos.h" + +struct k3_qos_data qos_data[] = { + /* modules_qosConfig0 - 1 endpoints, 4 channels */ + { + .reg = K3_QOS_REG(K3_DSS_UL_MAIN_0_VBUSM_DMA, 0), + .val = K3_QOS_VAL(0, 15, 0, 0, 0, 0), + }, + { + .reg = K3_QOS_REG(K3_DSS_UL_MAIN_0_VBUSM_DMA, 1), + .val = K3_QOS_VAL(0, 15, 0, 0, 0, 0), + }, + { + .reg = K3_QOS_REG(K3_DSS_UL_MAIN_0_VBUSM_DMA, 2), + .val = K3_QOS_VAL(0, 15, 0, 0, 0, 0), + }, + { + .reg = K3_QOS_REG(K3_DSS_UL_MAIN_0_VBUSM_DMA, 3), + .val = K3_QOS_VAL(0, 15, 0, 0, 0, 0), + }, + + /* modules_qosConfig1 - 1 endpoints, 4 channels */ + { + .reg = K3_QOS_REG(K3_DSS_UL_MAIN_1_VBUSM_DMA, 0), + .val = K3_QOS_VAL(0, 15, 0, 0, 0, 0), + }, + { + .reg = K3_QOS_REG(K3_DSS_UL_MAIN_1_VBUSM_DMA, 1), + .val = K3_QOS_VAL(0, 15, 0, 0, 0, 0), + }, + { + .reg = K3_QOS_REG(K3_DSS_UL_MAIN_1_VBUSM_DMA, 2), + .val = K3_QOS_VAL(0, 15, 0, 0, 0, 0), + }, + { + .reg = K3_QOS_REG(K3_DSS_UL_MAIN_1_VBUSM_DMA, 3), + .val = K3_QOS_VAL(0, 15, 0, 0, 0, 0), + }, + + /* Following registers set 1:1 mapping for orderID MAP1/MAP2 + * remap registers. orderID x is remapped to orderID x again + * This is to ensure orderID from MAP register is unchanged + */ + + /* K3_DSS_UL_MAIN_0_VBUSM_DMA - 0 groups */ + + /* K3_DSS_UL_MAIN_1_VBUSM_DMA - 0 groups */ +}; + +u32 qos_count = ARRAY_SIZE(qos_data); diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index c1a1a333e6c..adb816982f8 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -215,9 +215,16 @@ config TARGET_X530 bool "Support Allied Telesis x530" select 88F6820 +config TARGET_X250 + bool "Support Allied Telesis x250" + select ARMADA_8K + imply SCSI + imply BOOTSTD_DEFAULTS + config TARGET_X240 bool "Support Allied Telesis x240" select ALLEYCAT_5 + imply BOOTSTD_DEFAULTS config TARGET_DB_XC3_24G4XG bool "Support DB-XC3-24G4XG" @@ -301,6 +308,7 @@ config SYS_BOARD default "theadorable" if TARGET_THEADORABLE default "a38x" if TARGET_CONTROLCENTERDC default "x530" if TARGET_X530 + default "x250" if TARGET_X250 default "x240" if TARGET_X240 default "db-xc3-24g4xg" if TARGET_DB_XC3_24G4XG default "crs3xx-98dx3236" if TARGET_CRS3XX_98DX3236 @@ -325,6 +333,7 @@ config SYS_CONFIG_NAME default "turris_mox" if TARGET_TURRIS_MOX default "controlcenterdc" if TARGET_CONTROLCENTERDC default "x530" if TARGET_X530 + default "x250" if TARGET_X250 default "x240" if TARGET_X240 default "db-xc3-24g4xg" if TARGET_DB_XC3_24G4XG default "crs3xx-98dx3236" if TARGET_CRS3XX_98DX3236 @@ -349,6 +358,7 @@ config SYS_VENDOR default "CZ.NIC" if TARGET_TURRIS_MOX default "gdsys" if TARGET_CONTROLCENTERDC default "alliedtelesis" if TARGET_X530 + default "alliedtelesis" if TARGET_X250 default "alliedtelesis" if TARGET_X240 default "mikrotik" if TARGET_CRS3XX_98DX3236 default "Marvell" if TARGET_MVEBU_ALLEYCAT5 diff --git a/arch/arm/mach-renesas/Kconfig.32 b/arch/arm/mach-renesas/Kconfig.32 index 693a5abba0d..bbc61ccf480 100644 --- a/arch/arm/mach-renesas/Kconfig.32 +++ b/arch/arm/mach-renesas/Kconfig.32 @@ -1,11 +1,11 @@ if RCAR_32 config ARCH_RENESAS_BOARD_STRING - string "Renesas RCar Gen2 board name" + string "Renesas R-Car Gen2 board name" default "Board" config RCAR_GEN2 - bool "Renesas RCar Gen2" + bool "Renesas R-Car Gen2" select PHY select PHY_RCAR_GEN2 select TMU_TIMER diff --git a/arch/arm/mach-renesas/Kconfig.rcar4 b/arch/arm/mach-renesas/Kconfig.rcar4 index e80dce11f54..c2812fd75e4 100644 --- a/arch/arm/mach-renesas/Kconfig.rcar4 +++ b/arch/arm/mach-renesas/Kconfig.rcar4 @@ -17,6 +17,16 @@ config R8A779F0 config R8A779G0 bool "Renesas SoC R8A779G0" select GICV3 + select BINMAN + select SUPPORT_SPL + imply SPL + imply SPL_BOARD_INIT + imply SPL_LIBCOMMON_SUPPORT + imply SPL_LIBGENERIC_SUPPORT + imply SPL_SERIAL + imply SPL_SYS_MALLOC_SIMPLE + imply SPL_TINY_MEMSET + imply SPL_USE_TINY_PRINTF imply CLK_R8A779G0 imply PINCTRL_PFC_R8A779G0 diff --git a/arch/arm/mach-renesas/Makefile b/arch/arm/mach-renesas/Makefile index 71e12e00aba..317fce02d2b 100644 --- a/arch/arm/mach-renesas/Makefile +++ b/arch/arm/mach-renesas/Makefile @@ -15,8 +15,8 @@ obj-$(CONFIG_RCAR_GEN4) += cpu_info-rcar.o memmap-gen3.o obj-$(CONFIG_RZ_G2) += cpu_info-rzg.o obj-$(CONFIG_RZG2L) += cpu_info-rzg2l.o memmap-rzg2l.o -ifneq ($(CONFIG_R8A779A0),) -obj-$(CONFIG_ARMV8_PSCI) += psci-r8a779a0.o +ifneq ($(CONFIG_RCAR_64),) +obj-$(CONFIG_ARMV8_PSCI) += psci-rcar64.o endif OBJCOPYFLAGS_u-boot-spl.srec := -O srec diff --git a/arch/arm/mach-renesas/include/mach/boot0.h b/arch/arm/mach-renesas/include/mach/boot0.h index fe88a2e0373..fc68ffc0945 100644 --- a/arch/arm/mach-renesas/include/mach/boot0.h +++ b/arch/arm/mach-renesas/include/mach/boot0.h @@ -1,11 +1,12 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* - * Specialty padding for the RCar Gen2 SPL JTAG loading + * Specialty padding for the R-Car Gen2 SPL JTAG loading */ #ifndef __BOOT0_H #define __BOOT0_H +#if IS_ENABLED(CONFIG_RCAR_GEN2) _start: ARM_VECTORS @@ -19,5 +20,70 @@ _start: .word 0x0badc0d3; .word 0x0badc0d3; #endif +#endif + +#if IS_ENABLED(CONFIG_R8A779G0) + +#ifdef CONFIG_XPL_BUILD + /* r1=0xe6170800 */ + .inst 0xe3a004e6 /* mov r0, #0xe6000000 */ + .inst 0xe3801817 /* orr r1, r0, #0x170000 */ + .inst 0xe3814b02 /* orr r4, r1, #0x800 */ + + /* r0=0xe6280000 */ + .inst 0xe380070a /* orr r0, r0, #0x280000 */ + + /* APMU_RVBARPLC0 = (address of 'b reset' below) | CA_CORE0_VLD_RVBARP */ + .inst 0xe28f3088 /* add r3, pc, #0x88 */ + .inst 0xe3833001 /* orr r3, r3, #1 */ + .inst 0xe5843038 /* str r3, [r4, #56] @ 0x38 */ + + /* APMU_RVBARPHC0 = 0 */ + .inst 0xe3a05000 /* mov r5, #0 */ + .inst 0xe584503c /* str r5, [r4, #60] @ 0x3c */ + + /* PRR & 0xff00 ?= 0x5c00, test if this is V4H or V4M */ + .inst 0xe3a024ff /* mov r2, #0xff000000 */ + .inst 0xe382260f /* orr r2, r2, #0xf00000 */ + .inst 0xe5923044 /* ldr r3, [r2, #68] @ 0x44 */ + .inst 0xe2033cff /* and r3, r3, #0xff00 */ + .inst 0xe3530b17 /* cmp r3, #0x5c00 */ + .inst 0x1a00000a /* bne 68 <reset-0x18> */ + /* if (SoC is V4H) { */ + /* AP_CORE_APSREG_AP_CLUSTER_N_AUX0 |= AP_CORE_APSREG_AP_CLUSTER_N_AUX0_INIT */ + .inst 0xe5903010 /* ldr r3, [r0, #16] */ + .inst 0xe3833003 /* orr r3, r3, #3 */ + .inst 0xe5803010 /* str r3, [r0, #16] */ + /* AP_CORE_APSREG_CCI500_AUX |= AP_CORE_APSREG_CCI500_AUX_ACTDIS */ + .inst 0xe3800a09 /* orr r0, r0, #36864 @ 0x9000 */ + .inst 0xe5903010 /* ldr r3, [r0, #16] */ + .inst 0xe3833001 /* orr r3, r3, #1 */ + .inst 0xe5803010 /* str r3, [r0, #16] */ + /* AP_CORE_APSREG_P_CCI500_AUX |= AP_CORE_APSREG_P_CCI500_AUX_ASPRTM */ + .inst 0xe3800802 /* orr r0, r0, #131072 @ 0x20000 */ + .inst 0xe5903010 /* ldr r3, [r0, #16] */ + .inst 0xe3833002 /* orr r3, r3, #2 */ + .inst 0xe5803010 /* str r3, [r0, #16] */ + /* } */ + /* APMU_PWRCTRLC0 = CA_CORE0_WUP_REQ */ + .inst 0xe3a03001 /* mov r3, #1 */ + .inst 0xe5843000 /* str r3, [r4] */ + /* Test for APMU_CRBARP valid BAR flags and jump to CR entry point */ + .inst 0xe3814c03 /* orr r4, r1, #768 @ 0x300 */ + .inst 0xe584503c /* str r5, [r4, #60] @ 0x3c */ + .inst 0xe594203c /* ldr r2, [r4, #60] @ 0x3c */ + .inst 0xe20230ff /* and r3, r2, #255 @ 0xff */ + .inst 0xe3530011 /* cmp r3, #17 */ + .inst 0x1afffffb /* bne 78 <reset-0x28> */ + .inst 0xe1a02922 /* lsr r2, r2, #18 */ + .inst 0xe1a02902 /* lsl r2, r2, #18 */ + .inst 0xe1a0f002 /* mov pc, r2 */ + .inst 0xeafffffe /* b 94 <reset-0xc> */ + .inst 0xe1a00000 /* nop @ (mov r0, r0) */ + .inst 0xe1a00000 /* nop @ (mov r0, r0) */ + /* Offset 0xa0 */ +#endif + b reset +#endif #endif /* __BOOT0_H */ diff --git a/arch/arm/mach-renesas/include/mach/rcar-gen3-base.h b/arch/arm/mach-renesas/include/mach/rcar-gen3-base.h index 5e2e9eca452..7b4f5f0c651 100644 --- a/arch/arm/mach-renesas/include/mach/rcar-gen3-base.h +++ b/arch/arm/mach-renesas/include/mach/rcar-gen3-base.h @@ -67,6 +67,11 @@ #define SMSTPCR10 0xE6150998 #define SMSTPCR11 0xE615099C +/* GICv3 */ +/* Distributor Registers */ +#define GICD_BASE 0xF1010000 +#define GICC_BASE 0xF1020000 + /* PFC */ #define PFC_PUEN5 0xE6060414 #define PUEN_SSI_SDATA4 BIT(17) diff --git a/arch/arm/mach-renesas/memmap-gen3.c b/arch/arm/mach-renesas/memmap-gen3.c index c50700df078..d24419f5daa 100644 --- a/arch/arm/mach-renesas/memmap-gen3.c +++ b/arch/arm/mach-renesas/memmap-gen3.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * Renesas RCar Gen3 memory map tables + * Renesas R-Car Gen3 memory map tables * * Copyright (C) 2017 Marek Vasut <marek.vasut@gmail.com> */ diff --git a/arch/arm/mach-renesas/psci-r8a779a0.c b/arch/arm/mach-renesas/psci-rcar64.c index b6c49e731f9..a230692c9e0 100644 --- a/arch/arm/mach-renesas/psci-r8a779a0.c +++ b/arch/arm/mach-renesas/psci-rcar64.c @@ -1,9 +1,8 @@ // SPDX-License-Identifier: GPL-2.0 /* - * This file implements basic PSCI support for Renesas r8a779a0 SoC + * This file implements basic PSCI support for Renesas R-Car 64bit SoCs * * Copyright (C) 2020 Renesas Electronics Corp. - * */ #include <asm/io.h> diff --git a/arch/arm/mach-snapdragon/Kconfig b/arch/arm/mach-snapdragon/Kconfig index 536960b83c3..976c0e35fce 100644 --- a/arch/arm/mach-snapdragon/Kconfig +++ b/arch/arm/mach-snapdragon/Kconfig @@ -11,6 +11,9 @@ config SYS_VENDOR Based on this option board/<CONFIG_SYS_VENDOR>/<CONFIG_SYS_BOARD> will be used as the custom board directory. +config SYS_MALLOC_LEN + default 0x10000000 + config SYS_MALLOC_F_LEN default 0x2000 @@ -20,6 +23,9 @@ config SPL_SYS_MALLOC_F config SPL_SYS_MALLOC_F_LEN default 0x2000 +config SYS_MALLOC_LEN + default 0x800000 + config LNX_KRNL_IMG_TEXT_OFFSET_BASE default 0x80000000 diff --git a/arch/arm/mach-snapdragon/Makefile b/arch/arm/mach-snapdragon/Makefile index 7a4495c8108..343e825c6fd 100644 --- a/arch/arm/mach-snapdragon/Makefile +++ b/arch/arm/mach-snapdragon/Makefile @@ -3,4 +3,5 @@ # (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com> obj-y += board.o +obj-$(CONFIG_EFI_HAVE_CAPSULE_SUPPORT) += capsule_update.o obj-$(CONFIG_OF_LIVE) += of_fixup.o diff --git a/arch/arm/mach-snapdragon/board.c b/arch/arm/mach-snapdragon/board.c index 2ab2ceb5138..f1319df4314 100644 --- a/arch/arm/mach-snapdragon/board.c +++ b/arch/arm/mach-snapdragon/board.c @@ -6,7 +6,9 @@ * Author: Caleb Connolly <caleb.connolly@linaro.org> */ -#include "time.h" +#define LOG_CATEGORY LOGC_BOARD +#define pr_fmt(fmt) "QCOM: " fmt + #include <asm/armv8/mmu.h> #include <asm/gpio.h> #include <asm/io.h> @@ -29,6 +31,7 @@ #include <fdt_support.h> #include <usb.h> #include <sort.h> +#include <time.h> #include "qcom-priv.h" @@ -147,12 +150,12 @@ static void show_psci_version(void) * or for supporting quirky devices where it's easier to leave the downstream DT in place * to improve ABL compatibility. Otherwise, we use the DT provided by ABL. */ -void *board_fdt_blob_setup(int *err) +int board_fdt_blob_setup(void **fdtp) { struct fdt_header *fdt; bool internal_valid, external_valid; + int ret = 0; - *err = 0; fdt = (struct fdt_header *)get_prev_bl_fdt_addr(); external_valid = fdt && !fdt_check_header(fdt); internal_valid = !fdt_check_header(gd->fdt_blob); @@ -167,10 +170,11 @@ void *board_fdt_blob_setup(int *err) if (internal_valid) { debug("Using built in FDT\n"); + ret = -EEXIST; } else { debug("Using external FDT\n"); /* So we can use it before returning */ - gd->fdt_blob = fdt; + *fdtp = fdt; } /* @@ -179,7 +183,7 @@ void *board_fdt_blob_setup(int *err) */ qcom_parse_memory(); - return (void *)gd->fdt_blob; + return ret; } void reset_cpu(void) @@ -448,6 +452,9 @@ int board_late_init(void) configure_env(); qcom_late_init(); + /* Configure the dfu_string for capsule updates */ + qcom_configure_capsule_updates(); + return 0; } diff --git a/arch/arm/mach-snapdragon/capsule_update.c b/arch/arm/mach-snapdragon/capsule_update.c new file mode 100644 index 00000000000..bf75a9a1b24 --- /dev/null +++ b/arch/arm/mach-snapdragon/capsule_update.c @@ -0,0 +1,153 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Capsule update support for Qualcomm boards. + * + * Copyright (c) 2024 Linaro Ltd. + * Author: Caleb Connolly <caleb.connolly@linaro.org> + */ + +#define pr_fmt(fmt) "QCOM-FMP: " fmt + +#include <dm/device.h> +#include <dm/uclass.h> +#include <efi.h> +#include <efi_loader.h> +#include <malloc.h> +#include <scsi.h> +#include <part.h> +#include <linux/err.h> + +#include "qcom-priv.h" + +/* + * NOTE: for now this implementation only supports the rb3gen2. Supporting other + * boards that boot in different ways (e.g. chainloaded from ABL) will require + * additional complexity to properly create the dfu string and fw_images array. + */ + +/* + * To handle different variants like chainloaded U-Boot here we'll need to + * build the fw_images array dynamically at runtime. It looks like + * mach-rockchip is a good example for how to do this. + * Detecting which image types a board uses is TBD, hence for now we only + * support the one new board that runs U-Boot as its primary bootloader. + */ +struct efi_fw_image fw_images[] = { + { + /* U-Boot flashed to the uefi_X partition (e.g. rb3gen2) */ + .fw_name = u"UBOOT_UEFI_PARTITION", + .image_index = 1, + }, +}; + +struct efi_capsule_update_info update_info = { + /* Filled in by configure_dfu_string() */ + .dfu_string = NULL, + .num_images = ARRAY_SIZE(fw_images), + .images = fw_images, +}; + +/* LSB first */ +struct part_slot_status { + u16: 2; + u16 active : 1; + u16: 3; + u16 successful : 1; + u16 unbootable : 1; + u16 tries_remaining : 4; +}; + +static int find_boot_partition(const char *partname, struct blk_desc *blk_dev, char *name) +{ + int ret; + int partnum; + struct disk_partition info; + struct part_slot_status *slot_status; + + for (partnum = 1;; partnum++) { + ret = part_get_info(blk_dev, partnum, &info); + if (ret) + return ret; + + slot_status = (struct part_slot_status *)&info.type_flags; + log_io("%16s: Active: %1d, Successful: %1d, Unbootable: %1d, Tries left: %1d\n", + info.name, slot_status->active, + slot_status->successful, slot_status->unbootable, + slot_status->tries_remaining); + /* + * FIXME: eventually we'll want to find the active/inactive variant of the partition + * but on the rb3gen2 these values might all be 0 + */ + if (!strncmp(info.name, partname, strlen(partname))) { + log_debug("Found active %s partition: '%s'!\n", partname, info.name); + strlcpy(name, info.name, sizeof(info.name)); + return partnum; + } + } + + return -1; +} + +/** + * qcom_configure_capsule_updates() - Configure the DFU string for capsule updates + * + * U-Boot is flashed to the boot partition on Qualcomm boards. In most cases there + * are two boot partitions, boot_a and boot_b. As we don't currently support doing + * full A/B updates, we only support updating the currently active boot partition. + * + * So we need to find the current slot suffix and the associated boot partition. + * We do this by looking for the boot partition that has the 'active' flag set + * in the GPT partition vendor attribute bits. + */ +void qcom_configure_capsule_updates(void) +{ + struct blk_desc *desc; + int ret = 0, partnum = -1, devnum; + static char dfu_string[32] = { 0 }; + char name[32]; /* GPT partition name */ + char *partname = "uefi_a"; + struct udevice *dev = NULL; + + if (IS_ENABLED(CONFIG_SCSI)) { + /* Scan for SCSI devices */ + ret = scsi_scan(false); + if (ret) { + debug("Failed to scan SCSI devices: %d\n", ret); + return; + } + } + + uclass_foreach_dev_probe(UCLASS_BLK, dev) { + if (device_get_uclass_id(dev) != UCLASS_BLK) + continue; + + desc = dev_get_uclass_plat(dev); + if (!desc || desc->part_type == PART_TYPE_UNKNOWN) + continue; + devnum = desc->devnum; + partnum = find_boot_partition(partname, desc, + name); + if (partnum >= 0) + break; + } + + if (partnum < 0) { + log_err("Failed to find boot partition\n"); + return; + } + + switch (desc->uclass_id) { + case UCLASS_SCSI: + snprintf(dfu_string, 32, "scsi %d=u-boot.bin part %d", devnum, partnum); + break; + case UCLASS_MMC: + snprintf(dfu_string, 32, "mmc 0=u-boot.bin part %d %d", devnum, partnum); + break; + default: + debug("Unsupported storage uclass: %d\n", desc->uclass_id); + return; + } + log_debug("boot partition is %s, DFU string: '%s'\n", name, dfu_string); + + update_info.dfu_string = dfu_string; +} diff --git a/arch/arm/mach-snapdragon/qcom-priv.h b/arch/arm/mach-snapdragon/qcom-priv.h index 0a7ed5eff8b..74d39197b89 100644 --- a/arch/arm/mach-snapdragon/qcom-priv.h +++ b/arch/arm/mach-snapdragon/qcom-priv.h @@ -3,6 +3,12 @@ #ifndef __QCOM_PRIV_H__ #define __QCOM_PRIV_H__ +#if IS_ENABLED(CONFIG_EFI_HAVE_CAPSULE_SUPPORT) +void qcom_configure_capsule_updates(void); +#else +void qcom_configure_capsule_updates(void) {} +#endif /* EFI_HAVE_CAPSULE_SUPPORT */ + #if CONFIG_IS_ENABLED(OF_LIVE) /** * qcom_of_fixup_nodes() - Fixup Qualcomm DT nodes diff --git a/arch/arm/mach-stm32mp/boot_params.c b/arch/arm/mach-stm32mp/boot_params.c index ebddf6a7dbc..2d058edc419 100644 --- a/arch/arm/mach-stm32mp/boot_params.c +++ b/arch/arm/mach-stm32mp/boot_params.c @@ -6,6 +6,7 @@ #define LOG_CATEGORY LOGC_ARCH #include <config.h> +#include <errno.h> #include <log.h> #include <linux/libfdt.h> #include <asm/arch/sys_proto.h> @@ -16,20 +17,22 @@ * Use the saved FDT address provided by TF-A at boot time (NT_FW_CONFIG = * Non Trusted Firmware configuration file) when the pointer is valid */ -void *board_fdt_blob_setup(int *err) +int board_fdt_blob_setup(void **fdtp) { unsigned long nt_fw_dtb = get_stm32mp_bl2_dtb(); log_debug("%s: nt_fw_dtb=%lx\n", __func__, nt_fw_dtb); - *err = 0; /* use external device tree only if address is valid */ - if (nt_fw_dtb >= STM32_DDR_BASE) { - if (fdt_magic(nt_fw_dtb) == FDT_MAGIC) - return (void *)nt_fw_dtb; - log_debug("%s: DTB not found.\n", __func__); + if (nt_fw_dtb < STM32_DDR_BASE || + fdt_magic(nt_fw_dtb) != FDT_MAGIC) { + log_debug("DTB not found.\n"); + log_debug("fall back to builtin DTB, %p\n", _end); + + return -EEXIST; } - log_debug("%s: fall back to builtin DTB, %p\n", __func__, _end); - return (void *)_end; + *fdtp = (void *)nt_fw_dtb; + + return 0; } diff --git a/arch/arm/mach-stm32mp/stm32mp1/cpu.c b/arch/arm/mach-stm32mp/stm32mp1/cpu.c index 62cc98910a7..cb1b84c9af9 100644 --- a/arch/arm/mach-stm32mp/stm32mp1/cpu.c +++ b/arch/arm/mach-stm32mp/stm32mp1/cpu.c @@ -53,6 +53,7 @@ void dram_bank_mmu_setup(int bank) struct bd_info *bd = gd->bd; int i; phys_addr_t start; + phys_addr_t addr; phys_size_t size; bool use_lmb = false; enum dcache_option option; @@ -77,8 +78,12 @@ void dram_bank_mmu_setup(int bank) for (i = start >> MMU_SECTION_SHIFT; i < (start >> MMU_SECTION_SHIFT) + (size >> MMU_SECTION_SHIFT); i++) { + addr = i << MMU_SECTION_SHIFT; option = DCACHE_DEFAULT_OPTION; - if (use_lmb && lmb_is_reserved_flags(i << MMU_SECTION_SHIFT, LMB_NOMAP)) + if (use_lmb && + (lmb_is_reserved_flags(i << MMU_SECTION_SHIFT, LMB_NOMAP) || + addr >= gd->ram_top) + ) option = 0; /* INVALID ENTRY in TLB */ set_section_dcache(i, option); } diff --git a/arch/arm/mach-zynqmp/Kconfig b/arch/arm/mach-zynqmp/Kconfig index aea13622b68..92d61e84319 100644 --- a/arch/arm/mach-zynqmp/Kconfig +++ b/arch/arm/mach-zynqmp/Kconfig @@ -132,6 +132,20 @@ config SPL_ZYNQMP_RESTORE_JTAG even if no eFuses were burnt. This option restores the interface if possible. +config BL31_LOAD_ADDR + hex "Load address of BL31 image (mostly TF-A)" + default 0xfffea000 + help + The load address for the BL31 image. This value is used to build the + FIT image header that places BL31 in memory where it will run. + +config BL32_LOAD_ADDR + hex "Load address of BL32 image (mostly secure OS)" + default 0 + help + The load address for the BL32 image. This value is used to build the + FIT image header that places BL32 in memory where it will run. + config ZYNQ_SDHCI_MAX_FREQ default 200000000 diff --git a/arch/arm/mach-zynqmp/include/mach/hardware.h b/arch/arm/mach-zynqmp/include/mach/hardware.h index 49e449ebd61..3c372bd6dcf 100644 --- a/arch/arm/mach-zynqmp/include/mach/hardware.h +++ b/arch/arm/mach-zynqmp/include/mach/hardware.h @@ -188,6 +188,8 @@ struct pmu_regs { u32 gen_storage4; /* 0x40 */ u32 reserved1[1]; u32 gen_storage6; /* 0x48 */ + u32 reserved2[3]; + u32 pers_gen_storage2; /* 0x58 */ }; #define pmu_base ((struct pmu_regs *)ZYNQMP_PMU_BASEADDR) diff --git a/arch/arm/mach-zynqmp/mkimage_fit_atf.sh b/arch/arm/mach-zynqmp/mkimage_fit_atf.sh deleted file mode 100755 index cdecb1c1d35..00000000000 --- a/arch/arm/mach-zynqmp/mkimage_fit_atf.sh +++ /dev/null @@ -1,240 +0,0 @@ -#!/bin/sh -# SPDX-License-Identifier: GPL-2.0+ -# -# script to generate FIT image source for Xilinx ZynqMP boards with -# ARM Trusted Firmware and multiple device trees (given on the command line) -# -# usage: $0 <dt_name> [<dt_name> [<dt_name] ...] - -BL33="u-boot-nodtb.bin" -[ -z "$BL31" ] && BL31="bl31.bin" -BL31_ELF="${BL31%.*}.elf" -[ -f ${BL31_ELF} ] && ATF_LOAD_ADDR=`${CROSS_COMPILE}readelf -l "${BL31_ELF}" | \ -awk '/Entry point/ { print $3 }'` - -[ -z "$ATF_LOAD_ADDR" ] && ATF_LOAD_ADDR="0xfffea000" -ATF_LOAD_ADDR_LOW=`printf 0x%x $((ATF_LOAD_ADDR & 0xffffffff))` -ATF_LOAD_ADDR_HIGH=`printf 0x%x $((ATF_LOAD_ADDR >> 32))` - -[ -z "$BL32" ] && BL32="tee.bin" -BL32_ELF="${BL32%.*}.elf" -[ -f ${BL32_ELF} ] && TEE_LOAD_ADDR=`${CROSS_COMPILE}readelf -l "${BL32_ELF}" | \ -awk '/Entry point/ { print $3 }'` - -[ -z "$TEE_LOAD_ADDR" ] && TEE_LOAD_ADDR="0x60000000" -TEE_LOAD_ADDR_LOW=`printf 0x%x $((TEE_LOAD_ADDR & 0xffffffff))` -TEE_LOAD_ADDR_HIGH=`printf 0x%x $((TEE_LOAD_ADDR >> 32))` - -if [ -z "$BL33_LOAD_ADDR" ];then - BL33_LOAD_ADDR=`awk '/CONFIG_TEXT_BASE/ { print $3 }' include/generated/autoconf.h` -fi -BL33_LOAD_ADDR_LOW=`printf 0x%x $((BL33_LOAD_ADDR & 0xffffffff))` -BL33_LOAD_ADDR_HIGH=`printf 0x%x $((BL33_LOAD_ADDR >> 32))` - -DTB_LOAD_ADDR=`awk '/CONFIG_XILINX_OF_BOARD_DTB_ADDR/ { print $3 }' include/generated/autoconf.h` -if [ ! -z "$DTB_LOAD_ADDR" ]; then - DTB_LOAD_ADDR_LOW=`printf 0x%x $((DTB_LOAD_ADDR & 0xffffffff))` - DTB_LOAD_ADDR_HIGH=`printf 0x%x $((DTB_LOAD_ADDR >> 32))` - DTB_LOAD="load = <$DTB_LOAD_ADDR_HIGH $DTB_LOAD_ADDR_LOW>;" -else - DTB_LOAD="" -fi - -if [ -z "$*" ]; then - DT=arch/arm/dts/${DEVICE_TREE}.dtb -else - DT=$* -fi - -if [ ! -f $BL31 ]; then - echo "WARNING: BL31 file $BL31 NOT found, U-Boot will run in EL3" >&2 - BL31=/dev/null -fi - -cat << __HEADER_EOF -// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) - -/dts-v1/; - -/ { - description = "Configuration for Xilinx ZynqMP SoC"; - - images { - uboot { - description = "U-Boot (64-bit)"; - data = /incbin/("$BL33"); - type = "firmware"; - os = "u-boot"; - arch = "arm64"; - compression = "none"; - load = <$BL33_LOAD_ADDR_HIGH $BL33_LOAD_ADDR_LOW>; - entry = <$BL33_LOAD_ADDR_HIGH $BL33_LOAD_ADDR_LOW>; - hash { - algo = "md5"; - }; - }; -__HEADER_EOF - -if [ -f $BL31 ]; then -cat << __ATF - atf { - description = "Trusted Firmware-A"; - data = /incbin/("$BL31"); - type = "firmware"; - os = "arm-trusted-firmware"; - arch = "arm64"; - compression = "none"; - load = <$ATF_LOAD_ADDR_HIGH $ATF_LOAD_ADDR_LOW>; - entry = <$ATF_LOAD_ADDR_HIGH $ATF_LOAD_ADDR_LOW>; - hash { - algo = "md5"; - }; - }; -__ATF -fi - -if [ -f $BL32 ]; then -cat << __TEE - tee { - description = "TEE firmware"; - data = /incbin/("$BL32"); - type = "firmware"; - os = "tee"; - arch = "arm64"; - compression = "none"; - load = <$TEE_LOAD_ADDR_HIGH $TEE_LOAD_ADDR_LOW>; - entry = <$TEE_LOAD_ADDR_HIGH $TEE_LOAD_ADDR_LOW>; - hash { - algo = "md5"; - }; - }; -__TEE -fi - -MULTI_DTB=`awk '/CONFIG_MULTI_DTB_FIT / { print $3 }' include/generated/autoconf.h` - -if [ 1"$MULTI_DTB" -eq 11 ]; then - cat << __FDT_IMAGE_EOF - fdt_1 { - description = "Multi DTB fit image"; - data = /incbin/("fit-dtb.blob"); - type = "flat_dt"; - arch = "arm64"; - compression = "none"; - $DTB_LOAD - hash { - algo = "md5"; - }; - }; - }; - configurations { - default = "config_1"; -__FDT_IMAGE_EOF - -if [ ! -f $BL31 ]; then -cat << __CONF_SECTION1_EOF - config_1 { - description = "Multi DTB without TF-A"; - firmware = "uboot"; - loadables = "fdt_1"; - }; -__CONF_SECTION1_EOF -else -if [ -f $BL32 ]; then -cat << __CONF_SECTION1_EOF - config_1 { - description = "Multi DTB with TF-A and TEE"; - firmware = "atf"; - loadables = "uboot", "tee", "fdt_1"; - }; -__CONF_SECTION1_EOF -else -cat << __CONF_SECTION1_EOF - config_1 { - description = "Multi DTB with TF-A"; - firmware = "atf"; - loadables = "uboot", "fdt_1"; - }; -__CONF_SECTION1_EOF -fi -fi - -cat << __ITS_EOF - }; -}; -__ITS_EOF - -else - -DEFAULT=1 -cnt=1 -for dtname in $DT -do - cat << __FDT_IMAGE_EOF - fdt_$cnt { - description = "$(basename $dtname .dtb)"; - data = /incbin/("$dtname"); - type = "flat_dt"; - arch = "arm64"; - compression = "none"; - $DTB_LOAD - hash { - algo = "md5"; - }; - }; -__FDT_IMAGE_EOF - -[ "x$(basename $dtname .dtb)" = "x${DEVICE_TREE}" ] && DEFAULT=$cnt - -cnt=$((cnt+1)) -done - -cat << __CONF_HEADER_EOF - }; - configurations { - default = "config_$DEFAULT"; - -__CONF_HEADER_EOF - -cnt=1 -for dtname in $DT -do -if [ ! -f $BL31 ]; then -cat << __CONF_SECTION1_EOF - config_$cnt { - description = "$(basename $dtname .dtb)"; - firmware = "uboot"; - fdt = "fdt_$cnt"; - }; -__CONF_SECTION1_EOF -else -if [ -f $BL32 ]; then -cat << __CONF_SECTION1_EOF - config_$cnt { - description = "$(basename $dtname .dtb)"; - firmware = "atf"; - loadables = "uboot", "tee"; - fdt = "fdt_$cnt"; - }; -__CONF_SECTION1_EOF -else -cat << __CONF_SECTION1_EOF - config_$cnt { - description = "$(basename $dtname .dtb)"; - firmware = "atf"; - loadables = "uboot"; - fdt = "fdt_$cnt"; - }; -__CONF_SECTION1_EOF -fi -fi - -cnt=$((cnt+1)) -done - -cat << __ITS_EOF - }; -}; -__ITS_EOF - -fi diff --git a/arch/arm/mach-zynqmp/mp.c b/arch/arm/mach-zynqmp/mp.c index 6e6da8008f4..448bc532867 100644 --- a/arch/arm/mach-zynqmp/mp.c +++ b/arch/arm/mach-zynqmp/mp.c @@ -352,7 +352,7 @@ int cpu_release(u32 nr, int argc, char *const argv[]) */ flush_dcache_all(); - if (!strncmp(argv[1], "lockstep", 8)) { + if (!strcmp(argv[1], "lockstep") || !strcmp(argv[1], "0")) { if (nr != ZYNQMP_CORE_RPU0) { printf("Lockstep mode should run on ZYNQMP_CORE_RPU0\n"); return 1; @@ -369,7 +369,7 @@ int cpu_release(u32 nr, int argc, char *const argv[]) dcache_enable(); set_r5_halt_mode(nr, RELEASE, LOCK); mark_r5_used(nr, LOCK); - } else if (!strncmp(argv[1], "split", 5)) { + } else if (!strcmp(argv[1], "split") || !strcmp(argv[1], "1")) { printf("R5 split mode\n"); set_r5_reset(nr, SPLIT); set_r5_tcm_mode(SPLIT); |