summaryrefslogtreecommitdiff
path: root/arch/arm
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/dts/armada-370-xp.dtsi2
-rw-r--r--arch/arm/dts/armada-375.dtsi2
-rw-r--r--arch/arm/dts/armada-385-turris-omnia-u-boot.dtsi5
-rw-r--r--arch/arm/dts/armada-385-turris-omnia.dts241
-rw-r--r--arch/arm/dts/armada-385.dtsi52
-rw-r--r--arch/arm/dts/armada-38x.dtsi59
-rw-r--r--arch/arm/dts/armada-xp-db-xc3-24g4xg-u-boot.dtsi2
7 files changed, 293 insertions, 70 deletions
diff --git a/arch/arm/dts/armada-370-xp.dtsi b/arch/arm/dts/armada-370-xp.dtsi
index 50fc0be9f73..4cd168c9578 100644
--- a/arch/arm/dts/armada-370-xp.dtsi
+++ b/arch/arm/dts/armada-370-xp.dtsi
@@ -246,7 +246,7 @@
};
nand@d0000 {
- compatible = "marvell,armada370-nand";
+ compatible = "marvell,armada370-nand-controller";
reg = <0xd0000 0x54>;
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/dts/armada-375.dtsi b/arch/arm/dts/armada-375.dtsi
index ff0ad7a9c7f..fcb9245fd49 100644
--- a/arch/arm/dts/armada-375.dtsi
+++ b/arch/arm/dts/armada-375.dtsi
@@ -541,7 +541,7 @@
};
nand@d0000 {
- compatible = "marvell,armada370-nand";
+ compatible = "marvell,armada370-nand-controller";
reg = <0xd0000 0x54>;
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/dts/armada-385-turris-omnia-u-boot.dtsi b/arch/arm/dts/armada-385-turris-omnia-u-boot.dtsi
index 5a22cc64a1a..ec12298fd40 100644
--- a/arch/arm/dts/armada-385-turris-omnia-u-boot.dtsi
+++ b/arch/arm/dts/armada-385-turris-omnia-u-boot.dtsi
@@ -28,11 +28,8 @@
i2c@5 {
u-boot,dm-pre-reloc;
- /* ATSHA204A at address 0x64 */
crypto@64 {
u-boot,dm-pre-reloc;
- compatible = "atmel,atsha204a";
- reg = <0x64>;
};
};
};
@@ -42,7 +39,7 @@
&spi0 {
u-boot,dm-pre-reloc;
- spi-nor@0 {
+ flash@0 {
u-boot,dm-pre-reloc;
partitions {
diff --git a/arch/arm/dts/armada-385-turris-omnia.dts b/arch/arm/dts/armada-385-turris-omnia.dts
index 7f1478edfd2..0be55f8bf6e 100644
--- a/arch/arm/dts/armada-385-turris-omnia.dts
+++ b/arch/arm/dts/armada-385-turris-omnia.dts
@@ -1,43 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Device Tree file for the Turris Omnia
*
* Copyright (C) 2016 Uwe Kleine-König <uwe@kleine-koenig.org>
* Copyright (C) 2016 Tomas Hlavacek <tmshlvkc@gmail.com>
*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/*
* Schematic available at https://www.turris.cz/doc/_media/rtrom01-schema.pdf
*/
@@ -45,6 +12,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
#include "armada-385.dtsi"
/ {
@@ -70,7 +38,8 @@
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
- MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
+ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+ MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
internal-regs {
@@ -108,19 +77,48 @@
pcie@1,0 {
/* Port 0, Lane 0 */
status = "okay";
+ slot-power-limit-milliwatt = <10000>;
};
pcie@2,0 {
/* Port 1, Lane 0 */
status = "okay";
+ slot-power-limit-milliwatt = <10000>;
};
pcie@3,0 {
/* Port 2, Lane 0 */
status = "okay";
+ slot-power-limit-milliwatt = <10000>;
};
};
};
+
+ sfp: sfp {
+ compatible = "sff,sfp";
+ i2c-bus = <&sfp_i2c>;
+ tx-fault-gpios = <&pcawan 0 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&pcawan 1 GPIO_ACTIVE_HIGH>;
+ rate-select0-gpios = <&pcawan 2 GPIO_ACTIVE_HIGH>;
+ los-gpios = <&pcawan 3 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&pcawan 4 GPIO_ACTIVE_LOW>;
+ maximum-power-milliwatt = <3000>;
+
+ /*
+ * For now this has to be enabled at boot time by U-Boot when
+ * a SFP module is present. Read more in the comment in the
+ * eth2 node below.
+ */
+ status = "disabled";
+ };
+};
+
+&bm {
+ status = "okay";
+};
+
+&bm_bppi {
+ status = "okay";
};
/* Connected to 88E6176 switch, port 6 */
@@ -129,6 +127,9 @@
pinctrl-0 = <&ge0_rgmii_pins>;
status = "okay";
phy-mode = "rgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <0>;
+ bm,pool-short = <3>;
fixed-link {
speed = <1000>;
@@ -142,6 +143,9 @@
pinctrl-0 = <&ge1_rgmii_pins>;
status = "okay";
phy-mode = "rgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <1>;
+ bm,pool-short = <3>;
fixed-link {
speed = <1000>;
@@ -151,9 +155,23 @@
/* WAN port */
&eth2 {
+ /*
+ * eth2 is connected via a multiplexor to both the SFP cage and to
+ * ethernet-phy@1. The multiplexor switches the signal to SFP cage when
+ * a SFP module is present, as determined by the mode-def0 GPIO.
+ *
+ * Until kernel supports this configuration properly, in case SFP module
+ * is present, U-Boot has to enable the sfp node above, remove phy
+ * handle and add managed = "in-band-status" property.
+ */
status = "okay";
phy-mode = "sgmii";
- phy = <&phy1>;
+ phy-handle = <&phy1>;
+ phys = <&comphy5 2>;
+ sfp = <&sfp>;
+ buffer-manager = <&bm>;
+ bm,pool-long = <2>;
+ bm,pool-short = <3>;
};
&i2c0 {
@@ -166,18 +184,128 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0x70>;
- status = "okay";
i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
- /* STM32F0 command interface at address 0x2a */
- /* leds device (in STM32F0) at address 0x2b */
+ /* MCU command i2c API */
+ mcu: mcu@2a {
+ compatible = "cznic,turris-omnia-mcu";
+ reg = <0x2a>;
+ gpio-controller;
+ #gpio-cells = <3>;
+ };
+
+ led-controller@2b {
+ compatible = "cznic,turris-omnia-leds";
+ reg = <0x2b>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ /*
+ * LEDs are controlled by MCU (STM32F0) at
+ * address 0x2b.
+ *
+ * LED functions are not stable yet:
+ * - there are 3 LEDs connected via MCU to PCIe
+ * ports. One of these ports supports mSATA.
+ * There is no mSATA nor PCIe function.
+ * For now we use LED_FUNCTION_WLAN, since
+ * in most cases users have wifi cards in
+ * these slots
+ * - there are 2 LEDs dedicated for user: A and
+ * B. Again there is no such function defined.
+ * For now we use LED_FUNCTION_INDICATOR
+ */
+
+ multi-led@0 {
+ reg = <0x0>;
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <2>;
+ };
+
+ multi-led@1 {
+ reg = <0x1>;
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <1>;
+ };
+
+ multi-led@2 {
+ reg = <0x2>;
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_WLAN;
+ function-enumerator = <3>;
+ };
+
+ multi-led@3 {
+ reg = <0x3>;
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_WLAN;
+ function-enumerator = <2>;
+ };
+
+ multi-led@4 {
+ reg = <0x4>;
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_WLAN;
+ function-enumerator = <1>;
+ };
+
+ multi-led@5 {
+ reg = <0x5>;
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_WAN;
+ };
+
+ multi-led@6 {
+ reg = <0x6>;
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_LAN;
+ function-enumerator = <4>;
+ };
+
+ multi-led@7 {
+ reg = <0x7>;
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_LAN;
+ function-enumerator = <3>;
+ };
+
+ multi-led@8 {
+ reg = <0x8>;
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_LAN;
+ function-enumerator = <2>;
+ };
+
+ multi-led@9 {
+ reg = <0x9>;
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_LAN;
+ function-enumerator = <1>;
+ };
+
+ multi-led@a {
+ reg = <0xa>;
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_LAN;
+ function-enumerator = <0>;
+ };
+
+ multi-led@b {
+ reg = <0xb>;
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_POWER;
+ };
+ };
eeprom@54 {
- compatible = "at,24c64";
+ compatible = "atmel,24c64";
reg = <0x54>;
/* The EEPROM contains data for bootloader.
@@ -216,7 +344,7 @@
/* routed to PCIe2 connector (CN62A) */
};
- i2c@4 {
+ sfp_i2c: i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
@@ -229,7 +357,11 @@
#size-cells = <0>;
reg = <5>;
- /* ATSHA204A at address 0x64 */
+ /* ATSHA204A-MAHDA-T crypto module */
+ crypto@64 {
+ compatible = "atmel,atsha204a";
+ reg = <0x64>;
+ };
};
i2c@6 {
@@ -271,23 +403,29 @@
pinctrl-0 = <&mdio_pins>;
status = "okay";
- phy1: phy@1 {
- status = "okay";
- compatible = "ethernet-phy-id0141.0DD1", "ethernet-phy-ieee802.3-c22";
+ phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
+ marvell,reg-init = <3 18 0 0x4985>,
+ <3 16 0xfff0 0x0001>;
/* irq is connected to &pcawan pin 7 */
};
/* Switch MV88E6176 at address 0x10 */
switch@10 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&swint_pins>;
compatible = "marvell,mv88e6085";
#address-cells = <1>;
#size-cells = <0>;
- dsa,member = <0 0>;
+ dsa,member = <0 0>;
reg = <0x10>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+
ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -340,12 +478,17 @@
marvell,function = "gpio";
};
+ swint_pins: swint-pins {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+
spi0cs0_pins: spi0cs0-pins {
marvell,pins = "mpp25";
marvell,function = "spi0";
};
- spi0cs1_pins: spi0cs1-pins {
+ spi0cs2_pins: spi0cs2-pins {
marvell,pins = "mpp26";
marvell,function = "spi0";
};
@@ -356,7 +499,7 @@
pinctrl-0 = <&spi0_pins &spi0cs0_pins>;
status = "okay";
- spi-nor@0 {
+ flash@0 {
compatible = "spansion,s25fl164k", "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
@@ -380,7 +523,7 @@
};
};
- /* MISO, MOSI, SCLK and CS1 are routed to pin header CN11 */
+ /* MISO, MOSI, SCLK and CS2 are routed to pin header CN11 */
};
&uart0 {
diff --git a/arch/arm/dts/armada-385.dtsi b/arch/arm/dts/armada-385.dtsi
index 581a7d9beac..48072fc7fd4 100644
--- a/arch/arm/dts/armada-385.dtsi
+++ b/arch/arm/dts/armada-385.dtsi
@@ -69,17 +69,26 @@
reg = <0x0800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
+ interrupt-names = "intx";
+ interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
bus-range = <0x00 0xff>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+ <0 0 0 2 &pcie1_intc 1>,
+ <0 0 0 3 &pcie1_intc 2>,
+ <0 0 0 4 &pcie1_intc 3>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 8>;
resets = <&systemc 0 0>;
status = "disabled";
+ pcie1_intc: interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
};
/* x1 port */
@@ -89,17 +98,26 @@
reg = <0x1000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
+ interrupt-names = "intx";
+ interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
0x81000000 0 0 0x81000000 0x2 0 1 0>;
bus-range = <0x00 0xff>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+ <0 0 0 2 &pcie2_intc 1>,
+ <0 0 0 3 &pcie2_intc 2>,
+ <0 0 0 4 &pcie2_intc 3>;
marvell,pcie-port = <1>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 5>;
resets = <&systemc 0 1>;
status = "disabled";
+ pcie2_intc: interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
};
/* x1 port */
@@ -109,17 +127,26 @@
reg = <0x1800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
+ interrupt-names = "intx";
+ interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
0x81000000 0 0 0x81000000 0x3 0 1 0>;
bus-range = <0x00 0xff>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie3_intc 0>,
+ <0 0 0 2 &pcie3_intc 1>,
+ <0 0 0 3 &pcie3_intc 2>,
+ <0 0 0 4 &pcie3_intc 3>;
marvell,pcie-port = <2>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 6>;
resets = <&systemc 0 2>;
status = "disabled";
+ pcie3_intc: interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
};
/*
@@ -132,17 +159,26 @@
reg = <0x2000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
+ interrupt-names = "intx";
+ interrupts-extended = <&gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
0x81000000 0 0 0x81000000 0x4 0 1 0>;
bus-range = <0x00 0xff>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie4_intc 0>,
+ <0 0 0 2 &pcie4_intc 1>,
+ <0 0 0 3 &pcie4_intc 2>,
+ <0 0 0 4 &pcie4_intc 3>;
marvell,pcie-port = <3>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 7>;
resets = <&systemc 0 3>;
status = "disabled";
+ pcie4_intc: interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
};
};
};
diff --git a/arch/arm/dts/armada-38x.dtsi b/arch/arm/dts/armada-38x.dtsi
index 061bd785208..3e970097c89 100644
--- a/arch/arm/dts/armada-38x.dtsi
+++ b/arch/arm/dts/armada-38x.dtsi
@@ -9,13 +9,15 @@
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
*/
-#include "skeleton.dtsi"
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
model = "Marvell Armada 38x family SoC";
compatible = "marvell,armada380";
@@ -103,6 +105,11 @@
#size-cells = <1>;
ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+ sdramc: sdramc@1400 {
+ compatible = "marvell,armada-xp-sdram-controller";
+ reg = <0x1400 0x500>;
+ };
+
L2: cache-controller@8000 {
compatible = "arm,pl310-cache";
reg = <0x8000 0x1000>;
@@ -148,7 +155,6 @@
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
- timeout-ms = <1000>;
clocks = <&coreclk 0>;
status = "disabled";
};
@@ -159,13 +165,12 @@
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
- timeout-ms = <1000>;
clocks = <&coreclk 0>;
status = "disabled";
};
uart0: serial@12000 {
- compatible = "snps,dw-apb-uart";
+ compatible = "marvell,armada-38x-uart", "ns16550a";
reg = <0x12000 0x100>;
reg-shift = <2>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
@@ -175,7 +180,7 @@
};
uart1: serial@12100 {
- compatible = "snps,dw-apb-uart";
+ compatible = "marvell,armada-38x-uart", "ns16550a";
reg = <0x12100 0x100>;
reg-shift = <2>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
@@ -295,6 +300,7 @@
reg-names = "gpio", "pwm";
ngpios = <32>;
gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 32>;
#gpio-cells = <2>;
#pwm-cells = <2>;
interrupt-controller;
@@ -313,6 +319,7 @@
reg-names = "gpio", "pwm";
ngpios = <28>;
gpio-controller;
+ gpio-ranges = <&pinctrl 0 32 28>;
#gpio-cells = <2>;
#pwm-cells = <2>;
interrupt-controller;
@@ -338,6 +345,44 @@
#clock-cells = <1>;
};
+ comphy: phy@18300 {
+ compatible = "marvell,armada-380-comphy";
+ reg-names = "comphy", "conf";
+ reg = <0x18300 0x100>, <0x18460 4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ comphy0: phy@0 {
+ reg = <0>;
+ #phy-cells = <1>;
+ };
+
+ comphy1: phy@1 {
+ reg = <1>;
+ #phy-cells = <1>;
+ };
+
+ comphy2: phy@2 {
+ reg = <2>;
+ #phy-cells = <1>;
+ };
+
+ comphy3: phy@3 {
+ reg = <3>;
+ #phy-cells = <1>;
+ };
+
+ comphy4: phy@4 {
+ reg = <4>;
+ #phy-cells = <1>;
+ };
+
+ comphy5: phy@5 {
+ reg = <5>;
+ #phy-cells = <1>;
+ };
+ };
+
coreclk: mvebu-sar@18600 {
compatible = "marvell,armada-380-core-clock";
reg = <0x18600 0x04>;
@@ -379,6 +424,8 @@
reg = <0x20300 0x34>, <0x20704 0x4>, <0x18260 0x4>;
clocks = <&coreclk 2>, <&refclk>;
clock-names = "nbclk", "fixed";
+ interrupts-extended = <&gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
cpurst: cpurst@20800 {
@@ -555,7 +602,7 @@
};
nand_controller: nand-controller@d0000 {
- compatible = "marvell,armada370-nand","marvell,mvebu-pxa3xx-nand";
+ compatible = "marvell,armada370-nand-controller";
reg = <0xd0000 0x54>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/dts/armada-xp-db-xc3-24g4xg-u-boot.dtsi b/arch/arm/dts/armada-xp-db-xc3-24g4xg-u-boot.dtsi
index 90cad85506d..fdbe168a873 100644
--- a/arch/arm/dts/armada-xp-db-xc3-24g4xg-u-boot.dtsi
+++ b/arch/arm/dts/armada-xp-db-xc3-24g4xg-u-boot.dtsi
@@ -5,7 +5,7 @@
};
&nand_controller {
- compatible="marvell,mvebu-pxa3xx-nand";
+ compatible="marvell,armada370-nand-controller";
status = "okay";
label = "pxa3xx_nand-0";
nand-rb = <0>;
generated by cgit v1.2.3 (git 2.0.4) at 2025-11-03 00:33:06 +0000