diff options
Diffstat (limited to 'arch/i386/cpu/sc520/sc520.c')
| -rw-r--r-- | arch/i386/cpu/sc520/sc520.c | 148 |
1 files changed, 11 insertions, 137 deletions
diff --git a/arch/i386/cpu/sc520/sc520.c b/arch/i386/cpu/sc520/sc520.c index 7acd471d963..d0c313b91a9 100644 --- a/arch/i386/cpu/sc520/sc520.c +++ b/arch/i386/cpu/sc520/sc520.c @@ -1,6 +1,6 @@ /* * (C) Copyright 2002 - * Daniel Engström, Omicron Ceti AB <daniel@omicron.se>. + * Daniel Engstr�m, Omicron Ceti AB <daniel@omicron.se>. * * See file CREDITS for list of people who contributed to this * project. @@ -26,169 +26,43 @@ #include <common.h> #include <asm/io.h> +#include <asm/processor-flags.h> #include <asm/ic/sc520.h> DECLARE_GLOBAL_DATA_PTR; -/* - * utility functions for boards based on the AMD sc520 - * - * void init_sc520(void) - * unsigned long init_sc520_dram(void) - */ +sc520_mmcr_t *sc520_mmcr = (sc520_mmcr_t *)SC520_MMCR_BASE; -volatile sc520_mmcr_t *sc520_mmcr = (sc520_mmcr_t *)0xfffef000; - -void init_sc520(void) +int cpu_init_f(void) { - /* - * Set the UARTxCTL register at it's slower, - * baud clock giving us a 1.8432 MHz reference - */ - writeb(0x07, &sc520_mmcr->uart1ctl); - writeb(0x07, &sc520_mmcr->uart2ctl); - - /* first set the timer pin mapping */ - writeb(0x72, &sc520_mmcr->clksel); /* no clock frequency selected, use 1.1892MHz */ - - /* enable PCI bus arbiter (concurrent mode) */ - writeb(0x02, &sc520_mmcr->sysarbctl); - - /* enable external grants */ - writeb(0x1f, &sc520_mmcr->sysarbmenb); - - /* enable posted-writes */ - writeb(0x04, &sc520_mmcr->hbctl); - if (CONFIG_SYS_SC520_HIGH_SPEED) { /* set it to 133 MHz and write back */ writeb(0x02, &sc520_mmcr->cpuctl); gd->cpu_clk = 133000000; - printf("## CPU Speed set to 133MHz\n"); } else { /* set it to 100 MHz and write back */ writeb(0x01, &sc520_mmcr->cpuctl); - printf("## CPU Speed set to 100MHz\n"); gd->cpu_clk = 100000000; } - /* wait at least one millisecond */ asm("movl $0x2000, %%ecx\n" "0: pushl %%ecx\n" "popl %%ecx\n" "loop 0b\n": : : "ecx"); - /* turn on the SDRAM write buffer */ - writeb(0x11, &sc520_mmcr->dbctl); - - /* turn on the cache and disable write through */ - asm("movl %%cr0, %%eax\n" - "andl $0x9fffffff, %%eax\n" - "movl %%eax, %%cr0\n" : : : "eax"); + return x86_cpu_init_f(); } -unsigned long init_sc520_dram(void) +int cpu_init_r(void) { - bd_t *bd = gd->bd; - - u32 dram_present=0; - u32 dram_ctrl; - -#ifdef CONFIG_SYS_SDRAM_DRCTMCTL - /* these memory control registers are set up in the assember part, - * in sc520_asm.S, during 'mem_init'. If we muck with them here, - * after we are running a stack in RAM, we have troubles. Besides, - * these refresh and delay values are better ? simply specified - * outright in the include/configs/{cfg} file since the HW designer - * simply dictates it. - */ -#else - u8 tmp; - u8 val; - - int cas_precharge_delay = CONFIG_SYS_SDRAM_PRECHARGE_DELAY; - int refresh_rate = CONFIG_SYS_SDRAM_REFRESH_RATE; - int ras_cas_delay = CONFIG_SYS_SDRAM_RAS_CAS_DELAY; - - /* set SDRAM speed here */ - - refresh_rate /= 78; - if (refresh_rate <= 1) { - val = 0; /* 7.8us */ - } else if (refresh_rate == 2) { - val = 1; /* 15.6us */ - } else if (refresh_rate == 3 || refresh_rate == 4) { - val = 2; /* 31.2us */ - } else { - val = 3; /* 62.4us */ - } - - tmp = (readb(&sc520_mmcr->drcctl) & 0xcf) | (val<<4); - writeb(tmp, &sc520_mmcr->drcctl); + /* Disable the PAR used for CAR */ + writel(0x0000000, &sc520_mmcr->par[2]); - val = readb(&sc520_mmcr->drctmctl) & 0xf0; - - if (cas_precharge_delay==3) { - val |= 0x04; /* 3T */ - } else if (cas_precharge_delay==4) { - val |= 0x08; /* 4T */ - } else if (cas_precharge_delay>4) { - val |= 0x0c; - } - - if (ras_cas_delay > 3) { - val |= 2; - } else { - val |= 1; - } - writeb(val, &c520_mmcr->drctmctl); -#endif - - /* - * We read-back the configuration of the dram - * controller that the assembly code wrote - */ - dram_ctrl = readl(&sc520_mmcr->drcbendadr); - - bd->bi_dram[0].start = 0; - if (dram_ctrl & 0x80) { - /* bank 0 enabled */ - dram_present = bd->bi_dram[1].start = (dram_ctrl & 0x7f) << 22; - bd->bi_dram[0].size = bd->bi_dram[1].start; - } else { - bd->bi_dram[0].size = 0; - bd->bi_dram[1].start = bd->bi_dram[0].start; - } - - if (dram_ctrl & 0x8000) { - /* bank 1 enabled */ - dram_present = bd->bi_dram[2].start = (dram_ctrl & 0x7f00) << 14; - bd->bi_dram[1].size = bd->bi_dram[2].start - bd->bi_dram[1].start; - } else { - bd->bi_dram[1].size = 0; - bd->bi_dram[2].start = bd->bi_dram[1].start; - } - - if (dram_ctrl & 0x800000) { - /* bank 2 enabled */ - dram_present = bd->bi_dram[3].start = (dram_ctrl & 0x7f0000) << 6; - bd->bi_dram[2].size = bd->bi_dram[3].start - bd->bi_dram[2].start; - } else { - bd->bi_dram[2].size = 0; - bd->bi_dram[3].start = bd->bi_dram[2].start; - } - - if (dram_ctrl & 0x80000000) { - /* bank 3 enabled */ - dram_present = (dram_ctrl & 0x7f000000) >> 2; - bd->bi_dram[3].size = dram_present - bd->bi_dram[3].start; - } else { - bd->bi_dram[3].size = 0; - } - gd->ram_size = dram_present; + /* turn on the SDRAM write buffer */ + writeb(0x11, &sc520_mmcr->dbctl); - return dram_present; + return x86_cpu_init_r(); } #ifdef CONFIG_SYS_SC520_RESET |