diff options
Diffstat (limited to 'arch/mips/include')
30 files changed, 2232 insertions, 2037 deletions
diff --git a/arch/mips/include/asm/addrspace.h b/arch/mips/include/asm/addrspace.h index b768bb5081c..0994e9670b1 100644 --- a/arch/mips/include/asm/addrspace.h +++ b/arch/mips/include/asm/addrspace.h @@ -1,15 +1,15 @@ /* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * * Copyright (C) 1996, 99 Ralf Baechle * Copyright (C) 2000, 2002 Maciej W. Rozycki * Copyright (C) 1990, 1999 by Silicon Graphics, Inc. + * + * SPDX-License-Identifier: GPL-2.0 */ #ifndef _ASM_ADDRSPACE_H #define _ASM_ADDRSPACE_H +#include <spaces.h> + /* * Configure language */ @@ -50,7 +50,7 @@ */ #define CPHYSADDR(a) ((_ACAST32_(a)) & 0x1fffffff) #define XPHYSADDR(a) ((_ACAST64_(a)) & \ - _CONST64_(0x000000ffffffffff)) + _CONST64_(0x0000ffffffffffff)) #ifdef CONFIG_64BIT diff --git a/arch/mips/include/asm/asm.h b/arch/mips/include/asm/asm.h index 933ccb1b786..44694a3fb83 100644 --- a/arch/mips/include/asm/asm.h +++ b/arch/mips/include/asm/asm.h @@ -1,8 +1,4 @@ /* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * * Copyright (C) 1995, 1996, 1997, 1999, 2001 by Ralf Baechle * Copyright (C) 1999 by Silicon Graphics, Inc. * Copyright (C) 2001 MIPS Technologies, Inc. @@ -13,6 +9,8 @@ * Some of the routines below contain useless nops that will be optimized * away by gas in -O mode. These nops are however required to fill delay * slots in noreorder mode. + * + * SPDX-License-Identifier: GPL-2.0 */ #ifndef __ASM_ASM_H #define __ASM_ASM_H @@ -33,50 +31,58 @@ * Not used for the kernel but here seems to be the right place. */ #ifdef __PIC__ -#define CPRESTORE(register) \ +#define CPRESTORE(register) \ .cprestore register -#define CPADD(register) \ +#define CPADD(register) \ .cpadd register -#define CPLOAD(register) \ - .cpload register +#define CPLOAD(register) \ + .cpload register #else #define CPRESTORE(register) #define CPADD(register) #define CPLOAD(register) #endif +#define ENTRY(symbol) \ + .globl symbol; \ + .type symbol, @function; \ + .ent symbol, 0; \ +symbol: + /* * LEAF - declare leaf routine */ -#define LEAF(symbol) \ - .globl symbol; \ - .align 2; \ - .type symbol, @function; \ - .ent symbol, 0; \ +#define LEAF(symbol) \ + .globl symbol; \ + .align 2; \ + .type symbol, @function; \ + .ent symbol, 0; \ + .section .text.symbol, "x"; \ symbol: .frame sp, 0, ra /* * NESTED - declare nested routine entry point */ -#define NESTED(symbol, framesize, rpc) \ - .globl symbol; \ - .align 2; \ - .type symbol, @function; \ - .ent symbol, 0; \ +#define NESTED(symbol, framesize, rpc) \ + .globl symbol; \ + .align 2; \ + .type symbol, @function; \ + .ent symbol, 0; \ + .section .text.symbol, "x"; \ symbol: .frame sp, framesize, rpc /* * END - mark end of function */ -#define END(function) \ - .end function; \ +#define END(function) \ + .end function; \ .size function, .-function /* * EXPORT - export definition of symbol */ #define EXPORT(symbol) \ - .globl symbol; \ + .globl symbol; \ symbol: /* @@ -90,16 +96,16 @@ symbol: /* * ABS - export absolute symbol */ -#define ABS(symbol,value) \ - .globl symbol; \ +#define ABS(symbol,value) \ + .globl symbol; \ symbol = value -#define PANIC(msg) \ +#define PANIC(msg) \ .set push; \ - .set reorder; \ - PTR_LA a0, 8f; \ - jal panic; \ -9: b 9b; \ + .set reorder; \ + PTR_LA a0, 8f; \ + jal panic; \ +9: b 9b; \ .set pop; \ TEXT(msg) @@ -107,31 +113,31 @@ symbol = value * Print formatted string */ #ifdef CONFIG_PRINTK -#define PRINT(string) \ +#define PRINT(string) \ .set push; \ - .set reorder; \ - PTR_LA a0, 8f; \ - jal printk; \ + .set reorder; \ + PTR_LA a0, 8f; \ + jal printk; \ .set pop; \ TEXT(string) #else #define PRINT(string) #endif -#define TEXT(msg) \ +#define TEXT(msg) \ .pushsection .data; \ -8: .asciiz msg; \ +8: .asciiz msg; \ .popsection; /* * Build text tables */ -#define TTABLE(string) \ +#define TTABLE(string) \ .pushsection .text; \ - .word 1f; \ + .word 1f; \ .popsection \ .pushsection .data; \ -1: .asciiz string; \ +1: .asciiz string; \ .popsection /* @@ -143,21 +149,29 @@ symbol = value */ #ifdef CONFIG_CPU_HAS_PREFETCH -#define PREF(hint,addr) \ +#define PREF(hint, addr) \ .set push; \ - .set mips4; \ + .set arch=r5000; \ pref hint, addr; \ .set pop -#define PREFX(hint,addr) \ +#define PREFE(hint, addr) \ + .set push; \ + .set mips0; \ + .set eva; \ + prefe hint, addr; \ + .set pop + +#define PREFX(hint, addr) \ .set push; \ - .set mips4; \ + .set arch=r5000; \ prefx hint, addr; \ .set pop #else /* !CONFIG_CPU_HAS_PREFETCH */ #define PREF(hint, addr) +#define PREFE(hint, addr) #define PREFX(hint, addr) #endif /* !CONFIG_CPU_HAS_PREFETCH */ @@ -166,42 +180,42 @@ symbol = value * MIPS ISA IV/V movn/movz instructions and equivalents for older CPUs. */ #if (_MIPS_ISA == _MIPS_ISA_MIPS1) -#define MOVN(rd, rs, rt) \ +#define MOVN(rd, rs, rt) \ .set push; \ .set reorder; \ - beqz rt, 9f; \ - move rd, rs; \ + beqz rt, 9f; \ + move rd, rs; \ .set pop; \ 9: -#define MOVZ(rd, rs, rt) \ +#define MOVZ(rd, rs, rt) \ .set push; \ .set reorder; \ - bnez rt, 9f; \ - move rd, rs; \ + bnez rt, 9f; \ + move rd, rs; \ .set pop; \ 9: #endif /* _MIPS_ISA == _MIPS_ISA_MIPS1 */ #if (_MIPS_ISA == _MIPS_ISA_MIPS2) || (_MIPS_ISA == _MIPS_ISA_MIPS3) -#define MOVN(rd, rs, rt) \ +#define MOVN(rd, rs, rt) \ .set push; \ .set noreorder; \ - bnezl rt, 9f; \ - move rd, rs; \ + bnezl rt, 9f; \ + move rd, rs; \ .set pop; \ 9: -#define MOVZ(rd, rs, rt) \ +#define MOVZ(rd, rs, rt) \ .set push; \ .set noreorder; \ - beqzl rt, 9f; \ - move rd, rs; \ + beqzl rt, 9f; \ + move rd, rs; \ .set pop; \ 9: #endif /* (_MIPS_ISA == _MIPS_ISA_MIPS2) || (_MIPS_ISA == _MIPS_ISA_MIPS3) */ #if (_MIPS_ISA == _MIPS_ISA_MIPS4 ) || (_MIPS_ISA == _MIPS_ISA_MIPS5) || \ (_MIPS_ISA == _MIPS_ISA_MIPS32) || (_MIPS_ISA == _MIPS_ISA_MIPS64) -#define MOVN(rd, rs, rt) \ +#define MOVN(rd, rs, rt) \ movn rd, rs, rt -#define MOVZ(rd, rs, rt) \ +#define MOVZ(rd, rs, rt) \ movz rd, rs, rt #endif /* MIPS IV, MIPS V, MIPS32 or MIPS64 */ @@ -296,6 +310,7 @@ symbol = value #define LONG_SUBU subu #define LONG_L lw #define LONG_S sw +#define LONG_SP swp #define LONG_SLL sll #define LONG_SLLV sllv #define LONG_SRL srl @@ -318,6 +333,7 @@ symbol = value #define LONG_SUBU dsubu #define LONG_L ld #define LONG_S sd +#define LONG_SP sdp #define LONG_SLL dsll #define LONG_SLLV dsllv #define LONG_SRL dsrl diff --git a/arch/mips/include/asm/au1x00.h b/arch/mips/include/asm/au1x00.h deleted file mode 100644 index f76c4c3160f..00000000000 --- a/arch/mips/include/asm/au1x00.h +++ /dev/null @@ -1,1072 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * Include file for Alchemy Semiconductor's Au1k CPU. - * - * Copyright 2000,2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - - /* - * some definitions add by takuzo@sm.sony.co.jp and sato@sm.sony.co.jp - */ - -#ifndef _AU1X00_H_ -#define _AU1X00_H_ - -#ifndef __ASSEMBLY__ -/* cpu pipeline flush */ -void static inline au_sync(void) -{ - __asm__ volatile ("sync"); -} - -void static inline au_sync_udelay(int us) -{ - __asm__ volatile ("sync"); - udelay(us); -} - -void static inline au_writeb(u8 val, int reg) -{ - *(volatile u8 *)(reg) = val; -} - -void static inline au_writew(u16 val, int reg) -{ - *(volatile u16 *)(reg) = val; -} - -void static inline au_writel(u32 val, int reg) -{ - *(volatile u32 *)(reg) = val; -} - -static inline u8 au_readb(unsigned long port) -{ - return (*(volatile u8 *)port); -} - -static inline u16 au_readw(unsigned long port) -{ - return (*(volatile u16 *)port); -} - -static inline u32 au_readl(unsigned long port) -{ - return (*(volatile u32 *)port); -} - -/* These next three functions should be a generic part of the MIPS - * kernel (with the 'au_' removed from the name) and selected for - * processors that support the instructions. - * Taken from PPC tree. -- Dan - */ -/* Return the bit position of the most significant 1 bit in a word */ -static __inline__ int __ilog2(unsigned int x) -{ - int lz; - - asm volatile ( - ".set\tnoreorder\n\t" - ".set\tnoat\n\t" - ".set\tmips32\n\t" - "clz\t%0,%1\n\t" - ".set\tmips0\n\t" - ".set\tat\n\t" - ".set\treorder" - : "=r" (lz) - : "r" (x)); - - return 31 - lz; -} - -static __inline__ int au_ffz(unsigned int x) -{ - if ((x = ~x) == 0) - return 32; - return __ilog2(x & -x); -} - -/* - * ffs: find first bit set. This is defined the same way as - * the libc and compiler builtin ffs routines, therefore - * differs in spirit from the above ffz (man ffs). - */ -static __inline__ int au_ffs(int x) -{ - return __ilog2(x & -x) + 1; -} - -#define gpio_set(Value) outl(Value, SYS_OUTPUTSET) -#define gpio_clear(Value) outl(Value, SYS_OUTPUTCLR) -#define gpio_read() inl(SYS_PINSTATERD) -#define gpio_tristate(Value) outl(Value, SYS_TRIOUTCLR) - -#endif /* !ASSEMBLY */ - -#ifdef CONFIG_PM -/* no CP0 timer irq */ -#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4) -#else -#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5) -#endif - -#define CP0_IWATCHLO $18,1 -#define CP0_DEBUG $23 - -/* SDRAM Controller */ -#ifdef CONFIG_SOC_AU1550 - -#define MEM_SDMODE0 0xB4000800 -#define MEM_SDMODE1 0xB4000808 -#define MEM_SDMODE2 0xB4000810 - -#define MEM_SDADDR0 0xB4000820 -#define MEM_SDADDR1 0xB4000828 -#define MEM_SDADDR2 0xB4000830 - -#define MEM_SDCONFIGA 0xB4000840 -#define MEM_SDCONFIGB 0xB4000848 -#define MEM_SDPRECMD 0xB40008c0 -#define MEM_SDAUTOREF 0xB40008c8 - -#define MEM_SDWRMD0 0xB4000880 -#define MEM_SDWRMD1 0xB4000888 -#define MEM_SDWRMD2 0xB4000890 - -#else /* CONFIG_SOC_AU1550 */ - -#define MEM_SDMODE0 0xB4000000 -#define MEM_SDMODE1 0xB4000004 -#define MEM_SDMODE2 0xB4000008 - -#define MEM_SDADDR0 0xB400000C -#define MEM_SDADDR1 0xB4000010 -#define MEM_SDADDR2 0xB4000014 - -#define MEM_SDREFCFG 0xB4000018 -#define MEM_SDPRECMD 0xB400001C -#define MEM_SDAUTOREF 0xB4000020 - -#define MEM_SDWRMD0 0xB4000024 -#define MEM_SDWRMD1 0xB4000028 -#define MEM_SDWRMD2 0xB400002C - -#endif /* CONFIG_SOC_AU1550 */ - -#define MEM_SDSLEEP 0xB4000030 -#define MEM_SDSMCKE 0xB4000034 - -/* Static Bus Controller */ -#define MEM_STCFG0 0xB4001000 -#define MEM_STTIME0 0xB4001004 -#define MEM_STADDR0 0xB4001008 - -#define MEM_STCFG1 0xB4001010 -#define MEM_STTIME1 0xB4001014 -#define MEM_STADDR1 0xB4001018 - -#define MEM_STCFG2 0xB4001020 -#define MEM_STTIME2 0xB4001024 -#define MEM_STADDR2 0xB4001028 - -#define MEM_STCFG3 0xB4001030 -#define MEM_STTIME3 0xB4001034 -#define MEM_STADDR3 0xB4001038 - -/* Interrupt Controller 0 */ -#define IC0_CFG0RD 0xB0400040 -#define IC0_CFG0SET 0xB0400040 -#define IC0_CFG0CLR 0xB0400044 - -#define IC0_CFG1RD 0xB0400048 -#define IC0_CFG1SET 0xB0400048 -#define IC0_CFG1CLR 0xB040004C - -#define IC0_CFG2RD 0xB0400050 -#define IC0_CFG2SET 0xB0400050 -#define IC0_CFG2CLR 0xB0400054 - -#define IC0_REQ0INT 0xB0400054 -#define IC0_SRCRD 0xB0400058 -#define IC0_SRCSET 0xB0400058 -#define IC0_SRCCLR 0xB040005C -#define IC0_REQ1INT 0xB040005C - -#define IC0_ASSIGNRD 0xB0400060 -#define IC0_ASSIGNSET 0xB0400060 -#define IC0_ASSIGNCLR 0xB0400064 - -#define IC0_WAKERD 0xB0400068 -#define IC0_WAKESET 0xB0400068 -#define IC0_WAKECLR 0xB040006C - -#define IC0_MASKRD 0xB0400070 -#define IC0_MASKSET 0xB0400070 -#define IC0_MASKCLR 0xB0400074 - -#define IC0_RISINGRD 0xB0400078 -#define IC0_RISINGCLR 0xB0400078 -#define IC0_FALLINGRD 0xB040007C -#define IC0_FALLINGCLR 0xB040007C - -#define IC0_TESTBIT 0xB0400080 - -/* Interrupt Controller 1 */ -#define IC1_CFG0RD 0xB1800040 -#define IC1_CFG0SET 0xB1800040 -#define IC1_CFG0CLR 0xB1800044 - -#define IC1_CFG1RD 0xB1800048 -#define IC1_CFG1SET 0xB1800048 -#define IC1_CFG1CLR 0xB180004C - -#define IC1_CFG2RD 0xB1800050 -#define IC1_CFG2SET 0xB1800050 -#define IC1_CFG2CLR 0xB1800054 - -#define IC1_REQ0INT 0xB1800054 -#define IC1_SRCRD 0xB1800058 -#define IC1_SRCSET 0xB1800058 -#define IC1_SRCCLR 0xB180005C -#define IC1_REQ1INT 0xB180005C - -#define IC1_ASSIGNRD 0xB1800060 -#define IC1_ASSIGNSET 0xB1800060 -#define IC1_ASSIGNCLR 0xB1800064 - -#define IC1_WAKERD 0xB1800068 -#define IC1_WAKESET 0xB1800068 -#define IC1_WAKECLR 0xB180006C - -#define IC1_MASKRD 0xB1800070 -#define IC1_MASKSET 0xB1800070 -#define IC1_MASKCLR 0xB1800074 - -#define IC1_RISINGRD 0xB1800078 -#define IC1_RISINGCLR 0xB1800078 -#define IC1_FALLINGRD 0xB180007C -#define IC1_FALLINGCLR 0xB180007C - -#define IC1_TESTBIT 0xB1800080 - -/* Interrupt Configuration Modes */ -#define INTC_INT_DISABLED 0 -#define INTC_INT_RISE_EDGE 0x1 -#define INTC_INT_FALL_EDGE 0x2 -#define INTC_INT_RISE_AND_FALL_EDGE 0x3 -#define INTC_INT_HIGH_LEVEL 0x5 -#define INTC_INT_LOW_LEVEL 0x6 -#define INTC_INT_HIGH_AND_LOW_LEVEL 0x7 - -/* Interrupt Numbers */ -#define AU1X00_UART0_INT 0 -#define AU1000_UART1_INT 1 /* au1000 */ -#define AU1000_UART2_INT 2 /* au1000 */ - -#define AU1500_PCI_INTA 1 /* au1500 */ -#define AU1500_PCI_INTB 2 /* au1500 */ - -#define AU1X00_UART3_INT 3 - -#define AU1000_SSI0_INT 4 /* au1000 */ -#define AU1000_SSI1_INT 5 /* au1000 */ - -#define AU1500_PCI_INTC 4 /* au1500 */ -#define AU1500_PCI_INTD 5 /* au1500 */ - -#define AU1X00_DMA_INT_BASE 6 -#define AU1X00_TOY_INT 14 -#define AU1X00_TOY_MATCH0_INT 15 -#define AU1X00_TOY_MATCH1_INT 16 -#define AU1X00_TOY_MATCH2_INT 17 -#define AU1X00_RTC_INT 18 -#define AU1X00_RTC_MATCH0_INT 19 -#define AU1X00_RTC_MATCH1_INT 20 -#define AU1X00_RTC_MATCH2_INT 21 -#define AU1000_IRDA_TX_INT 22 /* au1000 */ -#define AU1000_IRDA_RX_INT 23 /* au1000 */ -#define AU1X00_USB_DEV_REQ_INT 24 -#define AU1X00_USB_DEV_SUS_INT 25 -#define AU1X00_USB_HOST_INT 26 -#define AU1X00_ACSYNC_INT 27 -#define AU1X00_MAC0_DMA_INT 28 -#define AU1X00_MAC1_DMA_INT 29 -#define AU1X00_ETH0_IRQ AU1X00_MAC0_DMA_INT -#define AU1X00_ETH1_IRQ AU1X00_MAC1_DMA_INT -#define AU1000_I2S_UO_INT 30 /* au1000 */ -#define AU1X00_AC97C_INT 31 -#define AU1X00_LAST_INTC0_INT AU1X00_AC97C_INT -#define AU1X00_GPIO_0 32 -#define AU1X00_GPIO_1 33 -#define AU1X00_GPIO_2 34 -#define AU1X00_GPIO_3 35 -#define AU1X00_GPIO_4 36 -#define AU1X00_GPIO_5 37 -#define AU1X00_GPIO_6 38 -#define AU1X00_GPIO_7 39 -#define AU1X00_GPIO_8 40 -#define AU1X00_GPIO_9 41 -#define AU1X00_GPIO_10 42 -#define AU1X00_GPIO_11 43 -#define AU1X00_GPIO_12 44 -#define AU1X00_GPIO_13 45 -#define AU1X00_GPIO_14 46 -#define AU1X00_GPIO_15 47 - -/* Au1000 only */ -#define AU1000_GPIO_16 48 -#define AU1000_GPIO_17 49 -#define AU1000_GPIO_18 50 -#define AU1000_GPIO_19 51 -#define AU1000_GPIO_20 52 -#define AU1000_GPIO_21 53 -#define AU1000_GPIO_22 54 -#define AU1000_GPIO_23 55 -#define AU1000_GPIO_24 56 -#define AU1000_GPIO_25 57 -#define AU1000_GPIO_26 58 -#define AU1000_GPIO_27 59 -#define AU1000_GPIO_28 60 -#define AU1000_GPIO_29 61 -#define AU1000_GPIO_30 62 -#define AU1000_GPIO_31 63 - -/* Au1500 only */ -#define AU1500_GPIO_200 48 -#define AU1500_GPIO_201 49 -#define AU1500_GPIO_202 50 -#define AU1500_GPIO_203 51 -#define AU1500_GPIO_20 52 -#define AU1500_GPIO_204 53 -#define AU1500_GPIO_205 54 -#define AU1500_GPIO_23 55 -#define AU1500_GPIO_24 56 -#define AU1500_GPIO_25 57 -#define AU1500_GPIO_26 58 -#define AU1500_GPIO_27 59 -#define AU1500_GPIO_28 60 -#define AU1500_GPIO_206 61 -#define AU1500_GPIO_207 62 -#define AU1500_GPIO_208_215 63 - -#define AU1X00_MAX_INTR 63 - -#define AU1100_SD 2 -#define AU1100_GPIO_208_215 29 -/* REDEFINE SECONDARY GPIO BLOCK INTO IC1 CONTROLLER HERE */ - -/* Programmable Counters 0 and 1 */ -#define SYS_BASE 0xB1900000 -#define SYS_COUNTER_CNTRL (SYS_BASE + 0x14) -#define SYS_CNTRL_E1S (1<<23) -#define SYS_CNTRL_T1S (1<<20) -#define SYS_CNTRL_M21 (1<<19) -#define SYS_CNTRL_M11 (1<<18) -#define SYS_CNTRL_M01 (1<<17) -#define SYS_CNTRL_C1S (1<<16) -#define SYS_CNTRL_BP (1<<14) -#define SYS_CNTRL_EN1 (1<<13) -#define SYS_CNTRL_BT1 (1<<12) -#define SYS_CNTRL_EN0 (1<<11) -#define SYS_CNTRL_BT0 (1<<10) -#define SYS_CNTRL_E0 (1<<8) -#define SYS_CNTRL_E0S (1<<7) -#define SYS_CNTRL_32S (1<<5) -#define SYS_CNTRL_T0S (1<<4) -#define SYS_CNTRL_M20 (1<<3) -#define SYS_CNTRL_M10 (1<<2) -#define SYS_CNTRL_M00 (1<<1) -#define SYS_CNTRL_C0S (1<<0) - -/* Programmable Counter 0 Registers */ -#define SYS_TOYTRIM (SYS_BASE + 0) -#define SYS_TOYWRITE (SYS_BASE + 4) -#define SYS_TOYMATCH0 (SYS_BASE + 8) -#define SYS_TOYMATCH1 (SYS_BASE + 0xC) -#define SYS_TOYMATCH2 (SYS_BASE + 0x10) -#define SYS_TOYREAD (SYS_BASE + 0x40) - -/* Programmable Counter 1 Registers */ -#define SYS_RTCTRIM (SYS_BASE + 0x44) -#define SYS_RTCWRITE (SYS_BASE + 0x48) -#define SYS_RTCMATCH0 (SYS_BASE + 0x4C) -#define SYS_RTCMATCH1 (SYS_BASE + 0x50) -#define SYS_RTCMATCH2 (SYS_BASE + 0x54) -#define SYS_RTCREAD (SYS_BASE + 0x58) - -/* I2S Controller */ -#define I2S_DATA 0xB1000000 -#define I2S_DATA_MASK (0xffffff) -#define I2S_CONFIG 0xB1000004 -#define I2S_CONFIG_XU (1<<25) -#define I2S_CONFIG_XO (1<<24) -#define I2S_CONFIG_RU (1<<23) -#define I2S_CONFIG_RO (1<<22) -#define I2S_CONFIG_TR (1<<21) -#define I2S_CONFIG_TE (1<<20) -#define I2S_CONFIG_TF (1<<19) -#define I2S_CONFIG_RR (1<<18) -#define I2S_CONFIG_RE (1<<17) -#define I2S_CONFIG_RF (1<<16) -#define I2S_CONFIG_PD (1<<11) -#define I2S_CONFIG_LB (1<<10) -#define I2S_CONFIG_IC (1<<9) -#define I2S_CONFIG_FM_BIT 7 -#define I2S_CONFIG_FM_MASK (0x3 << I2S_CONFIG_FM_BIT) -#define I2S_CONFIG_FM_I2S (0x0 << I2S_CONFIG_FM_BIT) -#define I2S_CONFIG_FM_LJ (0x1 << I2S_CONFIG_FM_BIT) -#define I2S_CONFIG_FM_RJ (0x2 << I2S_CONFIG_FM_BIT) -#define I2S_CONFIG_TN (1<<6) -#define I2S_CONFIG_RN (1<<5) -#define I2S_CONFIG_SZ_BIT 0 -#define I2S_CONFIG_SZ_MASK (0x1F << I2S_CONFIG_SZ_BIT) - -#define I2S_CONTROL 0xB1000008 -#define I2S_CONTROL_D (1<<1) -#define I2S_CONTROL_CE (1<<0) - -/* USB Host Controller */ -/* We pass USB_OHCI_BASE to ioremap, so it needs to be a physical address */ -#define USB_OHCI_BASE 0x10100000 -#define USB_OHCI_LEN 0x00100000 -#define USB_HOST_CONFIG 0xB017fffc - -/* USB Device Controller */ -#define USBD_EP0RD 0xB0200000 -#define USBD_EP0WR 0xB0200004 -#define USBD_EP2WR 0xB0200008 -#define USBD_EP3WR 0xB020000C -#define USBD_EP4RD 0xB0200010 -#define USBD_EP5RD 0xB0200014 -#define USBD_INTEN 0xB0200018 -#define USBD_INTSTAT 0xB020001C -#define USBDEV_INT_SOF (1<<12) -#define USBDEV_INT_HF_BIT 6 -#define USBDEV_INT_HF_MASK (0x3f << USBDEV_INT_HF_BIT) -#define USBDEV_INT_CMPLT_BIT 0 -#define USBDEV_INT_CMPLT_MASK (0x3f << USBDEV_INT_CMPLT_BIT) -#define USBD_CONFIG 0xB0200020 -#define USBD_EP0CS 0xB0200024 -#define USBD_EP2CS 0xB0200028 -#define USBD_EP3CS 0xB020002C -#define USBD_EP4CS 0xB0200030 -#define USBD_EP5CS 0xB0200034 -#define USBDEV_CS_SU (1<<14) -#define USBDEV_CS_NAK (1<<13) -#define USBDEV_CS_ACK (1<<12) -#define USBDEV_CS_BUSY (1<<11) -#define USBDEV_CS_TSIZE_BIT 1 -#define USBDEV_CS_TSIZE_MASK (0x3ff << USBDEV_CS_TSIZE_BIT) -#define USBDEV_CS_STALL (1<<0) -#define USBD_EP0RDSTAT 0xB0200040 -#define USBD_EP0WRSTAT 0xB0200044 -#define USBD_EP2WRSTAT 0xB0200048 -#define USBD_EP3WRSTAT 0xB020004C -#define USBD_EP4RDSTAT 0xB0200050 -#define USBD_EP5RDSTAT 0xB0200054 -#define USBDEV_FSTAT_FLUSH (1<<6) -#define USBDEV_FSTAT_UF (1<<5) -#define USBDEV_FSTAT_OF (1<<4) -#define USBDEV_FSTAT_FCNT_BIT 0 -#define USBDEV_FSTAT_FCNT_MASK (0x0f << USBDEV_FSTAT_FCNT_BIT) -#define USBD_ENABLE 0xB0200058 -#define USBDEV_ENABLE (1<<1) -#define USBDEV_CE (1<<0) - -/* Ethernet Controllers */ -#define AU1000_ETH0_BASE 0xB0500000 -#define AU1000_ETH1_BASE 0xB0510000 -#define AU1500_ETH0_BASE 0xB1500000 -#define AU1500_ETH1_BASE 0xB1510000 -#define AU1100_ETH0_BASE 0xB0500000 -#define AU1550_ETH0_BASE 0xB0500000 -#define AU1550_ETH1_BASE 0xB0510000 - -/* 4 byte offsets from AU1000_ETH_BASE */ -#define MAC_CONTROL 0x0 -#define MAC_RX_ENABLE (1<<2) -#define MAC_TX_ENABLE (1<<3) -#define MAC_DEF_CHECK (1<<5) -#define MAC_SET_BL(X) (((X)&0x3)<<6) -#define MAC_AUTO_PAD (1<<8) -#define MAC_DISABLE_RETRY (1<<10) -#define MAC_DISABLE_BCAST (1<<11) -#define MAC_LATE_COL (1<<12) -#define MAC_HASH_MODE (1<<13) -#define MAC_HASH_ONLY (1<<15) -#define MAC_PASS_ALL (1<<16) -#define MAC_INVERSE_FILTER (1<<17) -#define MAC_PROMISCUOUS (1<<18) -#define MAC_PASS_ALL_MULTI (1<<19) -#define MAC_FULL_DUPLEX (1<<20) -#define MAC_NORMAL_MODE 0 -#define MAC_INT_LOOPBACK (1<<21) -#define MAC_EXT_LOOPBACK (1<<22) -#define MAC_DISABLE_RX_OWN (1<<23) -#define MAC_BIG_ENDIAN (1<<30) -#define MAC_RX_ALL (1<<31) -#define MAC_ADDRESS_HIGH 0x4 -#define MAC_ADDRESS_LOW 0x8 -#define MAC_MCAST_HIGH 0xC -#define MAC_MCAST_LOW 0x10 -#define MAC_MII_CNTRL 0x14 -#define MAC_MII_BUSY (1<<0) -#define MAC_MII_READ 0 -#define MAC_MII_WRITE (1<<1) -#define MAC_SET_MII_SELECT_REG(X) (((X)&0x1f)<<6) -#define MAC_SET_MII_SELECT_PHY(X) (((X)&0x1f)<<11) -#define MAC_MII_DATA 0x18 -#define MAC_FLOW_CNTRL 0x1C -#define MAC_FLOW_CNTRL_BUSY (1<<0) -#define MAC_FLOW_CNTRL_ENABLE (1<<1) -#define MAC_PASS_CONTROL (1<<2) -#define MAC_SET_PAUSE(X) (((X)&0xffff)<<16) -#define MAC_VLAN1_TAG 0x20 -#define MAC_VLAN2_TAG 0x24 - -/* Ethernet Controller Enable */ -#define AU1000_MAC0_ENABLE 0xB0520000 -#define AU1000_MAC1_ENABLE 0xB0520004 -#define AU1500_MAC0_ENABLE 0xB1520000 -#define AU1500_MAC1_ENABLE 0xB1520004 -#define AU1100_MAC0_ENABLE 0xB0520000 -#define AU1550_MAC0_ENABLE 0xB0520000 -#define AU1550_MAC1_ENABLE 0xB0520004 - -#define MAC_EN_CLOCK_ENABLE (1<<0) -#define MAC_EN_RESET0 (1<<1) -#define MAC_EN_TOSS (0<<2) -#define MAC_EN_CACHEABLE (1<<3) -#define MAC_EN_RESET1 (1<<4) -#define MAC_EN_RESET2 (1<<5) -#define MAC_DMA_RESET (1<<6) - -/* Ethernet Controller DMA Channels */ - -#define MAC0_TX_DMA_ADDR 0xB4004000 -#define MAC1_TX_DMA_ADDR 0xB4004200 -/* offsets from MAC_TX_RING_ADDR address */ -#define MAC_TX_BUFF0_STATUS 0x0 -#define TX_FRAME_ABORTED (1<<0) -#define TX_JAB_TIMEOUT (1<<1) -#define TX_NO_CARRIER (1<<2) -#define TX_LOSS_CARRIER (1<<3) -#define TX_EXC_DEF (1<<4) -#define TX_LATE_COLL_ABORT (1<<5) -#define TX_EXC_COLL (1<<6) -#define TX_UNDERRUN (1<<7) -#define TX_DEFERRED (1<<8) -#define TX_LATE_COLL (1<<9) -#define TX_COLL_CNT_MASK (0xF<<10) -#define TX_PKT_RETRY (1<<31) -#define MAC_TX_BUFF0_ADDR 0x4 -#define TX_DMA_ENABLE (1<<0) -#define TX_T_DONE (1<<1) -#define TX_GET_DMA_BUFFER(X) (((X)>>2)&0x3) -#define MAC_TX_BUFF0_LEN 0x8 -#define MAC_TX_BUFF1_STATUS 0x10 -#define MAC_TX_BUFF1_ADDR 0x14 -#define MAC_TX_BUFF1_LEN 0x18 -#define MAC_TX_BUFF2_STATUS 0x20 -#define MAC_TX_BUFF2_ADDR 0x24 -#define MAC_TX_BUFF2_LEN 0x28 -#define MAC_TX_BUFF3_STATUS 0x30 -#define MAC_TX_BUFF3_ADDR 0x34 -#define MAC_TX_BUFF3_LEN 0x38 - -#define MAC0_RX_DMA_ADDR 0xB4004100 -#define MAC1_RX_DMA_ADDR 0xB4004300 -/* offsets from MAC_RX_RING_ADDR */ -#define MAC_RX_BUFF0_STATUS 0x0 -#define RX_FRAME_LEN_MASK 0x3fff -#define RX_WDOG_TIMER (1<<14) -#define RX_RUNT (1<<15) -#define RX_OVERLEN (1<<16) -#define RX_COLL (1<<17) -#define RX_ETHER (1<<18) -#define RX_MII_ERROR (1<<19) -#define RX_DRIBBLING (1<<20) -#define RX_CRC_ERROR (1<<21) -#define RX_VLAN1 (1<<22) -#define RX_VLAN2 (1<<23) -#define RX_LEN_ERROR (1<<24) -#define RX_CNTRL_FRAME (1<<25) -#define RX_U_CNTRL_FRAME (1<<26) -#define RX_MCAST_FRAME (1<<27) -#define RX_BCAST_FRAME (1<<28) -#define RX_FILTER_FAIL (1<<29) -#define RX_PACKET_FILTER (1<<30) -#define RX_MISSED_FRAME (1<<31) - -#define RX_ERROR (RX_WDOG_TIMER | RX_RUNT | RX_OVERLEN | \ - RX_COLL | RX_MII_ERROR | RX_CRC_ERROR | \ - RX_LEN_ERROR | RX_U_CNTRL_FRAME | RX_MISSED_FRAME) -#define MAC_RX_BUFF0_ADDR 0x4 -#define RX_DMA_ENABLE (1<<0) -#define RX_T_DONE (1<<1) -#define RX_GET_DMA_BUFFER(X) (((X)>>2)&0x3) -#define RX_SET_BUFF_ADDR(X) ((X)&0xffffffc0) -#define MAC_RX_BUFF1_STATUS 0x10 -#define MAC_RX_BUFF1_ADDR 0x14 -#define MAC_RX_BUFF2_STATUS 0x20 -#define MAC_RX_BUFF2_ADDR 0x24 -#define MAC_RX_BUFF3_STATUS 0x30 -#define MAC_RX_BUFF3_ADDR 0x34 - - -/* UARTS 0-3 */ -#define UART0_ADDR 0xB1100000 -#define UART1_ADDR 0xB1200000 -#define UART2_ADDR 0xB1300000 -#define UART3_ADDR 0xB1400000 -#define UART_BASE UART0_ADDR -#define UART_DEBUG_BASE UART2_ADDR - -#define UART_RX 0 /* Receive buffer */ -#define UART_TX 4 /* Transmit buffer */ -#define UART_IER 8 /* Interrupt Enable Register */ -#define UART_IIR 0xC /* Interrupt ID Register */ -#define UART_FCR 0x10 /* FIFO Control Register */ -#define UART_LCR 0x14 /* Line Control Register */ -#define UART_MCR 0x18 /* Modem Control Register */ -#define UART_LSR 0x1C /* Line Status Register */ -#define UART_MSR 0x20 /* Modem Status Register */ -#define UART_CLK 0x28 /* Baud Rate Clock Divider */ -#define UART_ENABLE 0x100 /* Uart enable */ - -#define UART_EN_CE 1 /* Clock enable */ -#define UART_EN_E 2 /* Enable */ - -#define UART_FCR_ENABLE_FIFO 0x01 /* Enable the FIFO */ -#define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */ -#define UART_FCR_CLEAR_XMIT 0x04 /* Clear the XMIT FIFO */ -#define UART_FCR_DMA_SELECT 0x08 /* For DMA applications */ -#define UART_FCR_TRIGGER_MASK 0xF0 /* Mask for the FIFO trigger range */ -#define UART_FCR_R_TRIGGER_1 0x00 /* Mask for receive trigger set at 1 */ -#define UART_FCR_R_TRIGGER_4 0x40 /* Mask for receive trigger set at 4 */ -#define UART_FCR_R_TRIGGER_8 0x80 /* Mask for receive trigger set at 8 */ -#define UART_FCR_R_TRIGGER_14 0xA0 /* Mask for receive trigger set at 14 */ -#define UART_FCR_T_TRIGGER_0 0x00 /* Mask for transmit trigger set at 0 */ -#define UART_FCR_T_TRIGGER_4 0x10 /* Mask for transmit trigger set at 4 */ -#define UART_FCR_T_TRIGGER_8 0x20 /* Mask for transmit trigger set at 8 */ -#define UART_FCR_T_TRIGGER_12 0x30 /* Mask for transmit trigger set at 12 */ - -/* - * These are the definitions for the Line Control Register - */ -#define UART_LCR_SBC 0x40 /* Set break control */ -#define UART_LCR_SPAR 0x20 /* Stick parity (?) */ -#define UART_LCR_EPAR 0x10 /* Even parity select */ -#define UART_LCR_PARITY 0x08 /* Parity Enable */ -#define UART_LCR_STOP 0x04 /* Stop bits: 0=1 stop bit, 1= 2 stop bits */ -#define UART_LCR_WLEN5 0x00 /* Wordlength: 5 bits */ -#define UART_LCR_WLEN6 0x01 /* Wordlength: 6 bits */ -#define UART_LCR_WLEN7 0x02 /* Wordlength: 7 bits */ -#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */ - -/* - * These are the definitions for the Line Status Register - */ -#define UART_LSR_TEMT 0x40 /* Transmitter empty */ -#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */ -#define UART_LSR_BI 0x10 /* Break interrupt indicator */ -#define UART_LSR_FE 0x08 /* Frame error indicator */ -#define UART_LSR_PE 0x04 /* Parity error indicator */ -#define UART_LSR_OE 0x02 /* Overrun error indicator */ -#define UART_LSR_DR 0x01 /* Receiver data ready */ - -/* - * These are the definitions for the Interrupt Identification Register - */ -#define UART_IIR_NO_INT 0x01 /* No interrupts pending */ -#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */ -#define UART_IIR_MSI 0x00 /* Modem status interrupt */ -#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */ -#define UART_IIR_RDI 0x04 /* Receiver data interrupt */ -#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */ - -/* - * These are the definitions for the Interrupt Enable Register - */ -#define UART_IER_MSI 0x08 /* Enable Modem status interrupt */ -#define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */ -#define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */ -#define UART_IER_RDI 0x01 /* Enable receiver data interrupt */ - -/* - * These are the definitions for the Modem Control Register - */ -#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */ -#define UART_MCR_OUT2 0x08 /* Out2 complement */ -#define UART_MCR_OUT1 0x04 /* Out1 complement */ -#define UART_MCR_RTS 0x02 /* RTS complement */ -#define UART_MCR_DTR 0x01 /* DTR complement */ - -/* - * These are the definitions for the Modem Status Register - */ -#define UART_MSR_DCD 0x80 /* Data Carrier Detect */ -#define UART_MSR_RI 0x40 /* Ring Indicator */ -#define UART_MSR_DSR 0x20 /* Data Set Ready */ -#define UART_MSR_CTS 0x10 /* Clear to Send */ -#define UART_MSR_DDCD 0x08 /* Delta DCD */ -#define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */ -#define UART_MSR_DDSR 0x02 /* Delta DSR */ -#define UART_MSR_DCTS 0x01 /* Delta CTS */ -#define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */ - - -/* SSIO */ -#define SSI0_STATUS 0xB1600000 -#define SSI_STATUS_BF (1<<4) -#define SSI_STATUS_OF (1<<3) -#define SSI_STATUS_UF (1<<2) -#define SSI_STATUS_D (1<<1) -#define SSI_STATUS_B (1<<0) -#define SSI0_INT 0xB1600004 -#define SSI_INT_OI (1<<3) -#define SSI_INT_UI (1<<2) -#define SSI_INT_DI (1<<1) -#define SSI0_INT_ENABLE 0xB1600008 -#define SSI_INTE_OIE (1<<3) -#define SSI_INTE_UIE (1<<2) -#define SSI_INTE_DIE (1<<1) -#define SSI0_CONFIG 0xB1600020 -#define SSI_CONFIG_AO (1<<24) -#define SSI_CONFIG_DO (1<<23) -#define SSI_CONFIG_ALEN_BIT 20 -#define SSI_CONFIG_ALEN_MASK (0x7<<20) -#define SSI_CONFIG_DLEN_BIT 16 -#define SSI_CONFIG_DLEN_MASK (0x7<<16) -#define SSI_CONFIG_DD (1<<11) -#define SSI_CONFIG_AD (1<<10) -#define SSI_CONFIG_BM_BIT 8 -#define SSI_CONFIG_BM_MASK (0x3<<8) -#define SSI_CONFIG_CE (1<<7) -#define SSI_CONFIG_DP (1<<6) -#define SSI_CONFIG_DL (1<<5) -#define SSI_CONFIG_EP (1<<4) -#define SSI0_ADATA 0xB1600024 -#define SSI_AD_D (1<<24) -#define SSI_AD_ADDR_BIT 16 -#define SSI_AD_ADDR_MASK (0xff<<16) -#define SSI_AD_DATA_BIT 0 -#define SSI_AD_DATA_MASK (0xfff<<0) -#define SSI0_CLKDIV 0xB1600028 -#define SSI0_CONTROL 0xB1600100 -#define SSI_CONTROL_CD (1<<1) -#define SSI_CONTROL_E (1<<0) - -/* SSI1 */ -#define SSI1_STATUS 0xB1680000 -#define SSI1_INT 0xB1680004 -#define SSI1_INT_ENABLE 0xB1680008 -#define SSI1_CONFIG 0xB1680020 -#define SSI1_ADATA 0xB1680024 -#define SSI1_CLKDIV 0xB1680028 -#define SSI1_ENABLE 0xB1680100 - -/* - * Register content definitions - */ -#define SSI_STATUS_BF (1<<4) -#define SSI_STATUS_OF (1<<3) -#define SSI_STATUS_UF (1<<2) -#define SSI_STATUS_D (1<<1) -#define SSI_STATUS_B (1<<0) - -/* SSI_INT */ -#define SSI_INT_OI (1<<3) -#define SSI_INT_UI (1<<2) -#define SSI_INT_DI (1<<1) - -/* SSI_INTEN */ -#define SSI_INTEN_OIE (1<<3) -#define SSI_INTEN_UIE (1<<2) -#define SSI_INTEN_DIE (1<<1) - -#define SSI_CONFIG_AO (1<<24) -#define SSI_CONFIG_DO (1<<23) -#define SSI_CONFIG_ALEN (7<<20) -#define SSI_CONFIG_DLEN (15<<16) -#define SSI_CONFIG_DD (1<<11) -#define SSI_CONFIG_AD (1<<10) -#define SSI_CONFIG_BM (3<<8) -#define SSI_CONFIG_CE (1<<7) -#define SSI_CONFIG_DP (1<<6) -#define SSI_CONFIG_DL (1<<5) -#define SSI_CONFIG_EP (1<<4) -#define SSI_CONFIG_ALEN_N(N) ((N-1)<<20) -#define SSI_CONFIG_DLEN_N(N) ((N-1)<<16) -#define SSI_CONFIG_BM_HI (0<<8) -#define SSI_CONFIG_BM_LO (1<<8) -#define SSI_CONFIG_BM_CY (2<<8) - -#define SSI_ADATA_D (1<<24) -#define SSI_ADATA_ADDR (0xFF<<16) -#define SSI_ADATA_DATA (0x0FFF) -#define SSI_ADATA_ADDR_N(N) (N<<16) - -#define SSI_ENABLE_CD (1<<1) -#define SSI_ENABLE_E (1<<0) - - -/* IrDA Controller */ -#define IRDA_BASE 0xB0300000 -#define IR_RING_PTR_STATUS (IRDA_BASE+0x00) -#define IR_RING_BASE_ADDR_H (IRDA_BASE+0x04) -#define IR_RING_BASE_ADDR_L (IRDA_BASE+0x08) -#define IR_RING_SIZE (IRDA_BASE+0x0C) -#define IR_RING_PROMPT (IRDA_BASE+0x10) -#define IR_RING_ADDR_CMPR (IRDA_BASE+0x14) -#define IR_INT_CLEAR (IRDA_BASE+0x18) -#define IR_CONFIG_1 (IRDA_BASE+0x20) -#define IR_RX_INVERT_LED (1<<0) -#define IR_TX_INVERT_LED (1<<1) -#define IR_ST (1<<2) -#define IR_SF (1<<3) -#define IR_SIR (1<<4) -#define IR_MIR (1<<5) -#define IR_FIR (1<<6) -#define IR_16CRC (1<<7) -#define IR_TD (1<<8) -#define IR_RX_ALL (1<<9) -#define IR_DMA_ENABLE (1<<10) -#define IR_RX_ENABLE (1<<11) -#define IR_TX_ENABLE (1<<12) -#define IR_LOOPBACK (1<<14) -#define IR_SIR_MODE (IR_SIR | IR_DMA_ENABLE | \ - IR_RX_ALL | IR_RX_ENABLE | IR_SF | IR_16CRC) -#define IR_SIR_FLAGS (IRDA_BASE+0x24) -#define IR_ENABLE (IRDA_BASE+0x28) -#define IR_RX_STATUS (1<<9) -#define IR_TX_STATUS (1<<10) -#define IR_READ_PHY_CONFIG (IRDA_BASE+0x2C) -#define IR_WRITE_PHY_CONFIG (IRDA_BASE+0x30) -#define IR_MAX_PKT_LEN (IRDA_BASE+0x34) -#define IR_RX_BYTE_CNT (IRDA_BASE+0x38) -#define IR_CONFIG_2 (IRDA_BASE+0x3C) -#define IR_MODE_INV (1<<0) -#define IR_ONE_PIN (1<<1) -#define IR_INTERFACE_CONFIG (IRDA_BASE+0x40) - -/* GPIO */ -#define SYS_PINFUNC 0xB190002C -#define SYS_PF_USB (1<<15) /* 2nd USB device/host */ -#define SYS_PF_U3 (1<<14) /* GPIO23/U3TXD */ -#define SYS_PF_U2 (1<<13) /* GPIO22/U2TXD */ -#define SYS_PF_U1 (1<<12) /* GPIO21/U1TXD */ -#define SYS_PF_SRC (1<<11) /* GPIO6/SROMCKE */ -#define SYS_PF_CK5 (1<<10) /* GPIO3/CLK5 */ -#define SYS_PF_CK4 (1<<9) /* GPIO2/CLK4 */ -#define SYS_PF_IRF (1<<8) /* GPIO15/IRFIRSEL */ -#define SYS_PF_UR3 (1<<7) /* GPIO[14:9]/UART3 */ -#define SYS_PF_I2D (1<<6) /* GPIO8/I2SDI */ -#define SYS_PF_I2S (1<<5) /* I2S/GPIO[29:31] */ -#define SYS_PF_NI2 (1<<4) /* NI2/GPIO[24:28] */ -#define SYS_PF_U0 (1<<3) /* U0TXD/GPIO20 */ -#define SYS_PF_RD (1<<2) /* IRTXD/GPIO19 */ -#define SYS_PF_A97 (1<<1) /* AC97/SSL1 */ -#define SYS_PF_S0 (1<<0) /* SSI_0/GPIO[16:18] */ -#define SYS_TRIOUTRD 0xB1900100 -#define SYS_TRIOUTCLR 0xB1900100 -#define SYS_OUTPUTRD 0xB1900108 -#define SYS_OUTPUTSET 0xB1900108 -#define SYS_OUTPUTCLR 0xB190010C -#define SYS_PINSTATERD 0xB1900110 -#define SYS_PININPUTEN 0xB1900110 - -/* GPIO2, Au1500 only */ -#define GPIO2_BASE 0xB1700000 -#define GPIO2_DIR (GPIO2_BASE + 0) -#define GPIO2_DATA_EN (GPIO2_BASE + 8) -#define GPIO2_PIN_STATE (GPIO2_BASE + 0xC) -#define GPIO2_INT_ENABLE (GPIO2_BASE + 0x10) -#define GPIO2_ENABLE (GPIO2_BASE + 0x14) - -/* Power Management */ -#define SYS_SCRATCH0 0xB1900018 -#define SYS_SCRATCH1 0xB190001C -#define SYS_WAKEMSK 0xB1900034 -#define SYS_ENDIAN 0xB1900038 -#define SYS_POWERCTRL 0xB190003C -#define SYS_WAKESRC 0xB190005C -#define SYS_SLPPWR 0xB1900078 -#define SYS_SLEEP 0xB190007C - -/* Clock Controller */ -#define SYS_FREQCTRL0 0xB1900020 -#define SYS_FC_FRDIV2_BIT 22 -#define SYS_FC_FRDIV2_MASK (0xff << FQC2_FRDIV2_BIT) -#define SYS_FC_FE2 (1<<21) -#define SYS_FC_FS2 (1<<20) -#define SYS_FC_FRDIV1_BIT 12 -#define SYS_FC_FRDIV1_MASK (0xff << FQC2_FRDIV1_BIT) -#define SYS_FC_FE1 (1<<11) -#define SYS_FC_FS1 (1<<10) -#define SYS_FC_FRDIV0_BIT 2 -#define SYS_FC_FRDIV0_MASK (0xff << FQC2_FRDIV0_BIT) -#define SYS_FC_FE0 (1<<1) -#define SYS_FC_FS0 (1<<0) -#define SYS_FREQCTRL1 0xB1900024 -#define SYS_FC_FRDIV5_BIT 22 -#define SYS_FC_FRDIV5_MASK (0xff << FQC2_FRDIV5_BIT) -#define SYS_FC_FE5 (1<<21) -#define SYS_FC_FS5 (1<<20) -#define SYS_FC_FRDIV4_BIT 12 -#define SYS_FC_FRDIV4_MASK (0xff << FQC2_FRDIV4_BIT) -#define SYS_FC_FE4 (1<<11) -#define SYS_FC_FS4 (1<<10) -#define SYS_FC_FRDIV3_BIT 2 -#define SYS_FC_FRDIV3_MASK (0xff << FQC2_FRDIV3_BIT) -#define SYS_FC_FE3 (1<<1) -#define SYS_FC_FS3 (1<<0) -#define SYS_CLKSRC 0xB1900028 -#define SYS_CS_ME1_BIT 27 -#define SYS_CS_ME1_MASK (0x7<<CSC_ME1_BIT) -#define SYS_CS_DE1 (1<<26) -#define SYS_CS_CE1 (1<<25) -#define SYS_CS_ME0_BIT 22 -#define SYS_CS_ME0_MASK (0x7<<CSC_ME0_BIT) -#define SYS_CS_DE0 (1<<21) -#define SYS_CS_CE0 (1<<20) -#define SYS_CS_MI2_BIT 17 -#define SYS_CS_MI2_MASK (0x7<<CSC_MI2_BIT) -#define SYS_CS_DI2 (1<<16) -#define SYS_CS_CI2 (1<<15) -#define SYS_CS_MUH_BIT 12 -#define SYS_CS_MUH_MASK (0x7<<CSC_MUH_BIT) -#define SYS_CS_DUH (1<<11) -#define SYS_CS_CUH (1<<10) -#define SYS_CS_MUD_BIT 7 -#define SYS_CS_MUD_MASK (0x7<<CSC_MUD_BIT) -#define SYS_CS_DUD (1<<6) -#define SYS_CS_CUD (1<<5) -#define SYS_CS_MIR_BIT 2 -#define SYS_CS_MIR_MASK (0x7<<CSC_MIR_BIT) -#define SYS_CS_DIR (1<<1) -#define SYS_CS_CIR (1<<0) - -#define SYS_CS_MUX_AUX 0x1 -#define SYS_CS_MUX_FQ0 0x2 -#define SYS_CS_MUX_FQ1 0x3 -#define SYS_CS_MUX_FQ2 0x4 -#define SYS_CS_MUX_FQ3 0x5 -#define SYS_CS_MUX_FQ4 0x6 -#define SYS_CS_MUX_FQ5 0x7 -#define SYS_CPUPLL 0xB1900060 -#define SYS_AUXPLL 0xB1900064 - -/* AC97 Controller */ -#define AC97C_CONFIG 0xB0000000 -#define AC97C_RECV_SLOTS_BIT 13 -#define AC97C_RECV_SLOTS_MASK (0x3ff << AC97C_RECV_SLOTS_BIT) -#define AC97C_XMIT_SLOTS_BIT 3 -#define AC97C_XMIT_SLOTS_MASK (0x3ff << AC97C_XMIT_SLOTS_BIT) -#define AC97C_SG (1<<2) -#define AC97C_SYNC (1<<1) -#define AC97C_RESET (1<<0) -#define AC97C_STATUS 0xB0000004 -#define AC97C_XU (1<<11) -#define AC97C_XO (1<<10) -#define AC97C_RU (1<<9) -#define AC97C_RO (1<<8) -#define AC97C_READY (1<<7) -#define AC97C_CP (1<<6) -#define AC97C_TR (1<<5) -#define AC97C_TE (1<<4) -#define AC97C_TF (1<<3) -#define AC97C_RR (1<<2) -#define AC97C_RE (1<<1) -#define AC97C_RF (1<<0) -#define AC97C_DATA 0xB0000008 -#define AC97C_CMD 0xB000000C -#define AC97C_WD_BIT 16 -#define AC97C_READ (1<<7) -#define AC97C_INDEX_MASK 0x7f -#define AC97C_CNTRL 0xB0000010 -#define AC97C_RS (1<<1) -#define AC97C_CE (1<<0) - -#define DB1000_BCSR_ADDR 0xAE000000 -#define DB1550_BCSR_ADDR 0xAF000000 - -#ifdef CONFIG_DBAU1550 -#define DB1XX0_BCSR_ADDR DB1550_BCSR_ADDR -#else -#define DB1XX0_BCSR_ADDR DB1000_BCSR_ADDR -#endif - -#ifdef CONFIG_SOC_AU1500 -/* Au1500 PCI Controller */ -#define Au1500_CFG_BASE 0xB4005000 /* virtual, kseg0 addr */ -#define Au1500_PCI_CMEM (Au1500_CFG_BASE + 0) -#define Au1500_PCI_CFG (Au1500_CFG_BASE + 4) -#define PCI_ERROR ((1<<22) | (1<<23) | (1<<24) | (1<<25) | (1<<26) | (1<<27)) -#define Au1500_PCI_B2BMASK_CCH (Au1500_CFG_BASE + 8) -#define Au1500_PCI_B2B0_VID (Au1500_CFG_BASE + 0xC) -#define Au1500_PCI_B2B1_ID (Au1500_CFG_BASE + 0x10) -#define Au1500_PCI_MWMASK_DEV (Au1500_CFG_BASE + 0x14) -#define Au1500_PCI_MWBASE_REV_CCL (Au1500_CFG_BASE + 0x18) -#define Au1500_PCI_ERR_ADDR (Au1500_CFG_BASE + 0x1C) -#define Au1500_PCI_SPEC_INTACK (Au1500_CFG_BASE + 0x20) -#define Au1500_PCI_ID (Au1500_CFG_BASE + 0x100) -#define Au1500_PCI_STATCMD (Au1500_CFG_BASE + 0x104) -#define Au1500_PCI_CLASSREV (Au1500_CFG_BASE + 0x108) -#define Au1500_PCI_HDRTYPE (Au1500_CFG_BASE + 0x10C) -#define Au1500_PCI_MBAR (Au1500_CFG_BASE + 0x110) - -#define Au1500_PCI_HDR 0xB4005100 /* virtual, kseg0 addr */ - -/* All of our structures, like pci resource, have 32 bit members. - * Drivers are expected to do an ioremap on the PCI MEM resource, but it's - * hard to store 0x4 0000 0000 in a 32 bit type. We require a small patch - * to __ioremap to check for addresses between (u32)Au1500_PCI_MEM_START and - * (u32)Au1500_PCI_MEM_END and change those to the full 36 bit PCI MEM - * addresses. For PCI IO, it's simpler because we get to do the ioremap - * ourselves and then adjust the device's resources. - */ -#define Au1500_EXT_CFG 0x600000000 -#define Au1500_EXT_CFG_TYPE1 0x680000000 -#define Au1500_PCI_IO_START 0x500000000 -#define Au1500_PCI_IO_END 0x5000FFFFF -#define Au1500_PCI_MEM_START 0x440000000 -#define Au1500_PCI_MEM_END 0x443FFFFFF - -#define PCI_IO_START (Au1500_PCI_IO_START + 0x300) -#define PCI_IO_END (Au1500_PCI_IO_END) -#define PCI_MEM_START (Au1500_PCI_MEM_START) -#define PCI_MEM_END (Au1500_PCI_MEM_END) -#define PCI_FIRST_DEVFN (0<<3) -#define PCI_LAST_DEVFN (19<<3) - -#endif - -#if defined(CONFIG_SOC_AU1100) || (defined(CONFIG_SOC_AU1000) && !defined(CONFIG_MIPS_PB1000)) -/* no PCI bus controller */ -#define PCI_IO_START 0 -#define PCI_IO_END 0 -#define PCI_MEM_START 0 -#define PCI_MEM_END 0 -#define PCI_FIRST_DEVFN 0 -#define PCI_LAST_DEVFN 0 -#endif -#define AU1X_SOCK0_IO 0xF00000000 -#define AU1X_SOCK0_PHYS_ATTR 0xF40000000 -#define AU1X_SOCK0_PHYS_MEM 0xF80000000 - -/* pcmcia socket 1 needs external glue logic so the memory map - * differs from board to board. - */ - -/* Only for db board, not older pb */ -#define AU1X_SOCK1_IO 0xF04000000 -#define AU1X_SOCK1_PHYS_ATTR 0xF44000000 -#define AU1X_SOCK1_PHYS_MEM 0xF84000000 - -#endif diff --git a/arch/mips/include/asm/bitops.h b/arch/mips/include/asm/bitops.h index c31ff6efb44..cce6995c749 100644 --- a/arch/mips/include/asm/bitops.h +++ b/arch/mips/include/asm/bitops.h @@ -1,10 +1,8 @@ /* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * * Copyright (c) 1994 - 1997, 1999, 2000 Ralf Baechle (ralf@gnu.org) * Copyright (c) 2000 Silicon Graphics, Inc. + * + * SPDX-License-Identifier: GPL-2.0 */ #ifndef _ASM_BITOPS_H #define _ASM_BITOPS_H diff --git a/arch/mips/include/asm/byteorder.h b/arch/mips/include/asm/byteorder.h index b5e685feb62..67fdf713018 100644 --- a/arch/mips/include/asm/byteorder.h +++ b/arch/mips/include/asm/byteorder.h @@ -1,9 +1,7 @@ /* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * * Copyright (C) 1996, 99, 2003 by Ralf Baechle + * + * SPDX-License-Identifier: GPL-2.0 */ #ifndef _ASM_BYTEORDER_H #define _ASM_BYTEORDER_H diff --git a/arch/mips/include/asm/cache.h b/arch/mips/include/asm/cache.h index 0dfb54ef4dd..806bd26ba98 100644 --- a/arch/mips/include/asm/cache.h +++ b/arch/mips/include/asm/cache.h @@ -7,15 +7,9 @@ #ifndef __MIPS_CACHE_H__ #define __MIPS_CACHE_H__ -/* - * The maximum L1 data cache line size on MIPS seems to be 128 bytes. We use - * that as a default for aligning DMA buffers unless the board config has - * specified another cache line size. - */ -#ifdef CONFIG_SYS_CACHELINE_SIZE -#define ARCH_DMA_MINALIGN CONFIG_SYS_CACHELINE_SIZE -#else -#define ARCH_DMA_MINALIGN 128 -#endif +#define L1_CACHE_SHIFT CONFIG_MIPS_L1_CACHE_SHIFT +#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) + +#define ARCH_DMA_MINALIGN (L1_CACHE_BYTES) #endif /* __MIPS_CACHE_H__ */ diff --git a/arch/mips/include/asm/cachectl.h b/arch/mips/include/asm/cachectl.h index f3ce721861d..5e77dfa0293 100644 --- a/arch/mips/include/asm/cachectl.h +++ b/arch/mips/include/asm/cachectl.h @@ -1,9 +1,7 @@ /* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * * Copyright (C) 1994, 1995, 1996 by Ralf Baechle + * + * SPDX-License-Identifier: GPL-2.0 */ #ifndef _ASM_CACHECTL #define _ASM_CACHECTL diff --git a/arch/mips/include/asm/cacheops.h b/arch/mips/include/asm/cacheops.h index af2adc701ed..a3b07c6ad0d 100644 --- a/arch/mips/include/asm/cacheops.h +++ b/arch/mips/include/asm/cacheops.h @@ -1,12 +1,10 @@ /* * Cache operations for the cache instruction. * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * * (C) Copyright 1996, 97, 99, 2002, 03 Ralf Baechle * (C) Copyright 1999 Silicon Graphics, Inc. + * + * SPDX-License-Identifier: GPL-2.0 */ #ifndef __ASM_CACHEOPS_H #define __ASM_CACHEOPS_H diff --git a/arch/mips/include/asm/const.h b/arch/mips/include/asm/const.h new file mode 100644 index 00000000000..f600e7a5b75 --- /dev/null +++ b/arch/mips/include/asm/const.h @@ -0,0 +1,31 @@ +/* + * const.h: Macros for dealing with constants. + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _LINUX_CONST_H +#define _LINUX_CONST_H + +/* Some constant macros are used in both assembler and + * C code. Therefore we cannot annotate them always with + * 'UL' and other type specifiers unilaterally. We + * use the following macros to deal with this. + * + * Similarly, _AT() will cast an expression with a type in C, but + * leave it unchanged in asm. + */ + +#ifdef __ASSEMBLY__ +#define _AC(X,Y) X +#define _AT(T,X) X +#else +#define __AC(X,Y) (X##Y) +#define _AC(X,Y) __AC(X,Y) +#define _AT(T,X) ((T)(X)) +#endif + +#define _BITUL(x) (_AC(1,UL) << (x)) +#define _BITULL(x) (_AC(1,ULL) << (x)) + +#endif /* !(_LINUX_CONST_H) */ diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h new file mode 100644 index 00000000000..a6e9d940190 --- /dev/null +++ b/arch/mips/include/asm/cpu-features.h @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2003, 2004 Ralf Baechle + * Copyright (C) 2004 Maciej W. Rozycki + * + * SPDX-License-Identifier: GPL-2.0 + */ +#ifndef __ASM_CPU_FEATURES_H +#define __ASM_CPU_FEATURES_H + +#include <cpu-feature-overrides.h> + +#ifdef CONFIG_32BIT +# ifndef cpu_has_64bits +# define cpu_has_64bits 0 +# endif +# ifndef cpu_has_64bit_addresses +# define cpu_has_64bit_addresses 0 +# endif +#endif + +#ifdef CONFIG_64BIT +# ifndef cpu_has_64bits +# define cpu_has_64bits 1 +# endif +# ifndef cpu_has_64bit_addresses +# define cpu_has_64bit_addresses 1 +# endif +#endif + +#endif /* __ASM_CPU_FEATURES_H */ diff --git a/arch/mips/include/asm/gpio.h b/arch/mips/include/asm/gpio.h new file mode 100644 index 00000000000..306ab4c9f2a --- /dev/null +++ b/arch/mips/include/asm/gpio.h @@ -0,0 +1 @@ +#include <asm-generic/gpio.h> diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h index a7ab087c0d4..b8ac5a5ac54 100644 --- a/arch/mips/include/asm/io.h +++ b/arch/mips/include/asm/io.h @@ -1,21 +1,28 @@ /* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * * Copyright (C) 1994, 1995 Waldorf GmbH - * Copyright (C) 1994 - 2000 Ralf Baechle + * Copyright (C) 1994 - 2000, 06 Ralf Baechle * Copyright (C) 1999, 2000 Silicon Graphics, Inc. - * Copyright (C) 2000 FSMLabs, Inc. + * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved. + * Author: Maciej W. Rozycki <macro@mips.com> + * + * SPDX-License-Identifier: GPL-2.0 */ #ifndef _ASM_IO_H #define _ASM_IO_H -#if 0 -#include <linux/pagemap.h> -#endif +#include <linux/compiler.h> +#include <linux/types.h> + #include <asm/addrspace.h> #include <asm/byteorder.h> +#include <asm/cpu-features.h> +#include <asm/pgtable-bits.h> +#include <asm/processor.h> +#include <asm/string.h> + +#include <ioremap.h> +#include <mangle-port.h> +#include <spaces.h> /* * Slowdown I/O port space accesses for antique hardware. @@ -23,44 +30,20 @@ #undef CONF_SLOWDOWN_IO /* - * Sane hardware offers swapping of I/O space accesses in hardware; less - * sane hardware forces software to fiddle with this ... + * Raw operations are never swapped in software. OTOH values that raw + * operations are working on may or may not have been swapped by the bus + * hardware. An example use would be for flash memory that's used for + * execute in place. */ -#if defined(CONFIG_SWAP_IO_SPACE) && defined(__MIPSEB__) +# define __raw_ioswabb(a, x) (x) +# define __raw_ioswabw(a, x) (x) +# define __raw_ioswabl(a, x) (x) +# define __raw_ioswabq(a, x) (x) +# define ____raw_ioswabq(a, x) (x) -#define __ioswab8(x) (x) -#define __ioswab16(x) swab16(x) -#define __ioswab32(x) swab32(x) +/* ioswab[bwlq], __mem_ioswab[bwlq] are defined in mangle-port.h */ -#else - -#define __ioswab8(x) (x) -#define __ioswab16(x) (x) -#define __ioswab32(x) (x) - -#endif - -/* - * This file contains the definitions for the MIPS counterpart of the - * x86 in/out instructions. This heap of macros and C results in much - * better code than the approach of doing it in plain C. The macros - * result in code that is to fast for certain hardware. On the other - * side the performance of the string functions should be improved for - * sake of certain devices like EIDE disks that do highspeed polled I/O. - * - * Ralf - * - * This file contains the definitions for the x86 IO instructions - * inb/inw/inl/outb/outw/outl and the "string versions" of the same - * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing" - * versions of the single-IO instructions (inb_p/inw_p/..). - * - * This file is not meant to be obfuscating: it's just complicated - * to (a) handle it all in a way that makes gcc able to optimize it - * as well as possible and (b) trying to avoid writing the same thing - * over and over again with slight variations and possibly making a - * mistake somewhere. - */ +#define IO_SPACE_LIMIT 0xffff /* * On MIPS I/O ports are memory mapped, so we access them using normal @@ -84,6 +67,7 @@ extern const unsigned long mips_io_port_base; static inline void set_io_port_base(unsigned long base) { * (unsigned long *) &mips_io_port_base = base; + barrier(); } /* @@ -114,378 +98,429 @@ static inline void set_io_port_base(unsigned long base) #endif /* - * Change virtual addresses to physical addresses and vv. - * These are trivial on the 1:1 Linux/MIPS mapping + * virt_to_phys - map virtual addresses to physical + * @address: address to remap + * + * The returned physical address is the physical (CPU) mapping for + * the memory address given. It is only valid to use this function on + * addresses directly mapped or allocated via kmalloc. + * + * This function does not give bus mappings for DMA transfers. In + * almost all conceivable cases a device driver should not be using + * this function */ -static inline phys_addr_t virt_to_phys(volatile void * address) +static inline unsigned long virt_to_phys(volatile const void *address) { -#ifndef CONFIG_64BIT - return CPHYSADDR(address); + unsigned long addr = (unsigned long)address; + + /* this corresponds to kernel implementation of __pa() */ +#ifdef CONFIG_64BIT + if (addr < CKSEG0) + return XPHYSADDR(addr); + + return CPHYSADDR(addr); #else - return XPHYSADDR(address); + return addr - PAGE_OFFSET + PHYS_OFFSET; #endif } -static inline void * phys_to_virt(unsigned long address) +/* + * phys_to_virt - map physical address to virtual + * @address: address to remap + * + * The returned virtual address is a current CPU mapping for + * the memory address given. It is only valid to use this function on + * addresses that have a kernel mapping + * + * This function does not handle bus mappings for DMA transfers. In + * almost all conceivable cases a device driver should not be using + * this function + */ +static inline void *phys_to_virt(unsigned long address) { -#ifndef CONFIG_64BIT - return (void *)KSEG0ADDR(address); -#else - return (void *)CKSEG0ADDR(address); -#endif + return (void *)(address + PAGE_OFFSET - PHYS_OFFSET); } /* - * IO bus memory addresses are also 1:1 with the physical address + * ISA I/O bus memory addresses are 1:1 with the physical address. */ -static inline unsigned long virt_to_bus(volatile void * address) +static inline unsigned long isa_virt_to_bus(volatile void *address) { -#ifndef CONFIG_64BIT - return CPHYSADDR(address); -#else - return XPHYSADDR(address); -#endif + return (unsigned long)address - PAGE_OFFSET; } -static inline void * bus_to_virt(unsigned long address) +static inline void *isa_bus_to_virt(unsigned long address) { -#ifndef CONFIG_64BIT - return (void *)KSEG0ADDR(address); -#else - return (void *)CKSEG0ADDR(address); -#endif + return (void *)(address + PAGE_OFFSET); } +#define isa_page_to_bus page_to_phys + /* - * isa_slot_offset is the address where E(ISA) busaddress 0 is mapped - * for the processor. + * However PCI ones are not necessarily 1:1 and therefore these interfaces + * are forbidden in portable PCI drivers. + * + * Allow them for x86 for legacy drivers, though. */ -extern unsigned long isa_slot_offset; +#define virt_to_bus virt_to_phys +#define bus_to_virt phys_to_virt -extern void * __ioremap(unsigned long offset, unsigned long size, unsigned long flags); - -#if 0 -static inline void *ioremap(unsigned long offset, unsigned long size) +static inline void __iomem *__ioremap_mode(phys_addr_t offset, unsigned long size, + unsigned long flags) { - return __ioremap(offset, size, _CACHE_UNCACHED); -} + void __iomem *addr; + phys_addr_t phys_addr; -static inline void *ioremap_nocache(unsigned long offset, unsigned long size) -{ - return __ioremap(offset, size, _CACHE_UNCACHED); -} + addr = plat_ioremap(offset, size, flags); + if (addr) + return addr; -extern void iounmap(void *addr); -#endif + phys_addr = fixup_bigphys_addr(offset, size); + return (void __iomem *)(unsigned long)CKSEG1ADDR(phys_addr); +} /* - * XXX We need system specific versions of these to handle EISA address bits - * 24-31 on SNI. - * XXX more SNI hacks. + * ioremap - map bus memory into CPU space + * @offset: bus address of the memory + * @size: size of the resource to map + * + * ioremap performs a platform specific sequence of operations to + * make bus memory CPU accessible via the readb/readw/readl/writeb/ + * writew/writel functions and the other mmio helpers. The returned + * address is not guaranteed to be usable directly as a virtual + * address. */ -#define __raw_readb(addr) (*(volatile unsigned char *)(addr)) -#define __raw_readw(addr) (*(volatile unsigned short *)(addr)) -#define __raw_readl(addr) (*(volatile unsigned int *)(addr)) -#define readb(addr) __raw_readb((addr)) -#define readw(addr) __ioswab16(__raw_readw((addr))) -#define readl(addr) __ioswab32(__raw_readl((addr))) - -#define __raw_writeb(b, addr) (*(volatile unsigned char *)(addr)) = (b) -#define __raw_writew(b, addr) (*(volatile unsigned short *)(addr)) = (b) -#define __raw_writel(b, addr) (*(volatile unsigned int *)(addr)) = (b) -#define writeb(b, addr) __raw_writeb((b), (addr)) -#define writew(b, addr) __raw_writew(__ioswab16(b), (addr)) -#define writel(b, addr) __raw_writel(__ioswab32(b), (addr)) - -#define memset_io(a,b,c) memset((void *)(a),(b),(c)) -#define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c)) -#define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c)) - -/* END SNI HACKS ... */ +#define ioremap(offset, size) \ + __ioremap_mode((offset), (size), _CACHE_UNCACHED) /* - * ISA space is 'always mapped' on currently supported MIPS systems, no need - * to explicitly ioremap() it. The fact that the ISA IO space is mapped - * to PAGE_OFFSET is pure coincidence - it does not mean ISA values - * are physical addresses. The following constant pointer can be - * used as the IO-area pointer (it can be iounmapped as well, so the - * analogy with PCI is quite large): + * ioremap_nocache - map bus memory into CPU space + * @offset: bus address of the memory + * @size: size of the resource to map + * + * ioremap_nocache performs a platform specific sequence of operations to + * make bus memory CPU accessible via the readb/readw/readl/writeb/ + * writew/writel functions and the other mmio helpers. The returned + * address is not guaranteed to be usable directly as a virtual + * address. + * + * This version of ioremap ensures that the memory is marked uncachable + * on the CPU as well as honouring existing caching rules from things like + * the PCI bus. Note that there are other caches and buffers on many + * busses. In particular driver authors should read up on PCI writes + * + * It's useful if some control registers are in such an area and + * write combining or read caching is not desirable: */ -#define __ISA_IO_base ((char *)(PAGE_OFFSET)) +#define ioremap_nocache(offset, size) \ + __ioremap_mode((offset), (size), _CACHE_UNCACHED) +#define ioremap_uc ioremap_nocache -#define isa_readb(a) readb(a) -#define isa_readw(a) readw(a) -#define isa_readl(a) readl(a) -#define isa_writeb(b,a) writeb(b,a) -#define isa_writew(w,a) writew(w,a) -#define isa_writel(l,a) writel(l,a) - -#define isa_memset_io(a,b,c) memset_io((a),(b),(c)) -#define isa_memcpy_fromio(a,b,c) memcpy_fromio((a),(b),(c)) -#define isa_memcpy_toio(a,b,c) memcpy_toio((a),(b),(c)) +/* + * ioremap_cachable - map bus memory into CPU space + * @offset: bus address of the memory + * @size: size of the resource to map + * + * ioremap_nocache performs a platform specific sequence of operations to + * make bus memory CPU accessible via the readb/readw/readl/writeb/ + * writew/writel functions and the other mmio helpers. The returned + * address is not guaranteed to be usable directly as a virtual + * address. + * + * This version of ioremap ensures that the memory is marked cachable by + * the CPU. Also enables full write-combining. Useful for some + * memory-like regions on I/O busses. + */ +#define ioremap_cachable(offset, size) \ + __ioremap_mode((offset), (size), _page_cachable_default) /* - * We don't have csum_partial_copy_fromio() yet, so we cheat here and - * just copy it. The net code will then do the checksum later. + * These two are MIPS specific ioremap variant. ioremap_cacheable_cow + * requests a cachable mapping, ioremap_uncached_accelerated requests a + * mapping using the uncached accelerated mode which isn't supported on + * all processors. */ -#define eth_io_copy_and_sum(skb,src,len,unused) memcpy_fromio((skb)->data,(src),(len)) -#define isa_eth_io_copy_and_sum(a,b,c,d) eth_copy_and_sum((a),(b),(c),(d)) +#define ioremap_cacheable_cow(offset, size) \ + __ioremap_mode((offset), (size), _CACHE_CACHABLE_COW) +#define ioremap_uncached_accelerated(offset, size) \ + __ioremap_mode((offset), (size), _CACHE_UNCACHED_ACCELERATED) -static inline int check_signature(unsigned long io_addr, - const unsigned char *signature, int length) +static inline void iounmap(const volatile void __iomem *addr) { - int retval = 0; - do { - if (readb(io_addr) != *signature) - goto out; - io_addr++; - signature++; - length--; - } while (length); - retval = 1; -out: - return retval; + plat_iounmap(addr); } -#define isa_check_signature(io, s, l) check_signature(i,s,l) -/* - * Talk about misusing macros.. - */ +#ifdef CONFIG_CPU_CAVIUM_OCTEON +#define war_octeon_io_reorder_wmb() wmb() +#else +#define war_octeon_io_reorder_wmb() do { } while (0) +#endif -#define __OUT1(s) \ -static inline void __out##s(unsigned int value, unsigned int port) { +#define __BUILD_MEMORY_SINGLE(pfx, bwlq, type, irq) \ + \ +static inline void pfx##write##bwlq(type val, \ + volatile void __iomem *mem) \ +{ \ + volatile type *__mem; \ + type __val; \ + \ + war_octeon_io_reorder_wmb(); \ + \ + __mem = (void *)__swizzle_addr_##bwlq((unsigned long)(mem)); \ + \ + __val = pfx##ioswab##bwlq(__mem, val); \ + \ + if (sizeof(type) != sizeof(u64) || sizeof(u64) == sizeof(long)) \ + *__mem = __val; \ + else if (cpu_has_64bits) { \ + type __tmp; \ + \ + __asm__ __volatile__( \ + ".set arch=r4000" "\t\t# __writeq""\n\t" \ + "dsll32 %L0, %L0, 0" "\n\t" \ + "dsrl32 %L0, %L0, 0" "\n\t" \ + "dsll32 %M0, %M0, 0" "\n\t" \ + "or %L0, %L0, %M0" "\n\t" \ + "sd %L0, %2" "\n\t" \ + ".set mips0" "\n" \ + : "=r" (__tmp) \ + : "0" (__val), "m" (*__mem)); \ + } else \ + BUG(); \ +} \ + \ +static inline type pfx##read##bwlq(const volatile void __iomem *mem) \ +{ \ + volatile type *__mem; \ + type __val; \ + \ + __mem = (void *)__swizzle_addr_##bwlq((unsigned long)(mem)); \ + \ + if (sizeof(type) != sizeof(u64) || sizeof(u64) == sizeof(long)) \ + __val = *__mem; \ + else if (cpu_has_64bits) { \ + __asm__ __volatile__( \ + ".set arch=r4000" "\t\t# __readq" "\n\t" \ + "ld %L0, %1" "\n\t" \ + "dsra32 %M0, %L0, 0" "\n\t" \ + "sll %L0, %L0, 0" "\n\t" \ + ".set mips0" "\n" \ + : "=r" (__val) \ + : "m" (*__mem)); \ + } else { \ + __val = 0; \ + BUG(); \ + } \ + \ + return pfx##ioswab##bwlq(__mem, __val); \ +} -#define __OUT2(m) \ -__asm__ __volatile__ ("s" #m "\t%0,%1(%2)" +#define __BUILD_IOPORT_SINGLE(pfx, bwlq, type, p, slow) \ + \ +static inline void pfx##out##bwlq##p(type val, unsigned long port) \ +{ \ + volatile type *__addr; \ + type __val; \ + \ + war_octeon_io_reorder_wmb(); \ + \ + __addr = (void *)__swizzle_addr_##bwlq(mips_io_port_base + port); \ + \ + __val = pfx##ioswab##bwlq(__addr, val); \ + \ + /* Really, we want this to be atomic */ \ + BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \ + \ + *__addr = __val; \ + slow; \ +} \ + \ +static inline type pfx##in##bwlq##p(unsigned long port) \ +{ \ + volatile type *__addr; \ + type __val; \ + \ + __addr = (void *)__swizzle_addr_##bwlq(mips_io_port_base + port); \ + \ + BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \ + \ + __val = *__addr; \ + slow; \ + \ + return pfx##ioswab##bwlq(__addr, __val); \ +} -#define __OUT(m,s,w) \ -__OUT1(s) __OUT2(m) : : "r" (__ioswab##w(value)), "i" (0), "r" (mips_io_port_base+port)); } \ -__OUT1(s##c) __OUT2(m) : : "r" (__ioswab##w(value)), "ir" (port), "r" (mips_io_port_base)); } \ -__OUT1(s##_p) __OUT2(m) : : "r" (__ioswab##w(value)), "i" (0), "r" (mips_io_port_base+port)); \ - SLOW_DOWN_IO; } \ -__OUT1(s##c_p) __OUT2(m) : : "r" (__ioswab##w(value)), "ir" (port), "r" (mips_io_port_base)); \ - SLOW_DOWN_IO; } +#define __BUILD_MEMORY_PFX(bus, bwlq, type) \ + \ +__BUILD_MEMORY_SINGLE(bus, bwlq, type, 1) + +#define BUILDIO_MEM(bwlq, type) \ + \ +__BUILD_MEMORY_PFX(__raw_, bwlq, type) \ +__BUILD_MEMORY_PFX(, bwlq, type) \ +__BUILD_MEMORY_PFX(__mem_, bwlq, type) \ + +BUILDIO_MEM(b, u8) +BUILDIO_MEM(w, u16) +BUILDIO_MEM(l, u32) +BUILDIO_MEM(q, u64) + +#define __BUILD_IOPORT_PFX(bus, bwlq, type) \ + __BUILD_IOPORT_SINGLE(bus, bwlq, type, ,) \ + __BUILD_IOPORT_SINGLE(bus, bwlq, type, _p, SLOW_DOWN_IO) + +#define BUILDIO_IOPORT(bwlq, type) \ + __BUILD_IOPORT_PFX(, bwlq, type) \ + __BUILD_IOPORT_PFX(__mem_, bwlq, type) + +BUILDIO_IOPORT(b, u8) +BUILDIO_IOPORT(w, u16) +BUILDIO_IOPORT(l, u32) +#ifdef CONFIG_64BIT +BUILDIO_IOPORT(q, u64) +#endif -#define __IN1(t,s) \ -static inline t __in##s(unsigned int port) { t _v; +#define __BUILDIO(bwlq, type) \ + \ +__BUILD_MEMORY_SINGLE(____raw_, bwlq, type, 0) + +__BUILDIO(q, u64) + +#define readb_relaxed readb +#define readw_relaxed readw +#define readl_relaxed readl +#define readq_relaxed readq + +#define writeb_relaxed writeb +#define writew_relaxed writew +#define writel_relaxed writel +#define writeq_relaxed writeq + +#define readb_be(addr) \ + __raw_readb((__force unsigned *)(addr)) +#define readw_be(addr) \ + be16_to_cpu(__raw_readw((__force unsigned *)(addr))) +#define readl_be(addr) \ + be32_to_cpu(__raw_readl((__force unsigned *)(addr))) +#define readq_be(addr) \ + be64_to_cpu(__raw_readq((__force unsigned *)(addr))) + +#define writeb_be(val, addr) \ + __raw_writeb((val), (__force unsigned *)(addr)) +#define writew_be(val, addr) \ + __raw_writew(cpu_to_be16((val)), (__force unsigned *)(addr)) +#define writel_be(val, addr) \ + __raw_writel(cpu_to_be32((val)), (__force unsigned *)(addr)) +#define writeq_be(val, addr) \ + __raw_writeq(cpu_to_be64((val)), (__force unsigned *)(addr)) /* - * Required nops will be inserted by the assembler + * Some code tests for these symbols */ -#define __IN2(m) \ -__asm__ __volatile__ ("l" #m "\t%0,%1(%2)" - -#define __IN(t,m,s,w) \ -__IN1(t,s) __IN2(m) : "=r" (_v) : "i" (0), "r" (mips_io_port_base+port)); return __ioswab##w(_v); } \ -__IN1(t,s##c) __IN2(m) : "=r" (_v) : "ir" (port), "r" (mips_io_port_base)); return __ioswab##w(_v); } \ -__IN1(t,s##_p) __IN2(m) : "=r" (_v) : "i" (0), "r" (mips_io_port_base+port)); SLOW_DOWN_IO; return __ioswab##w(_v); } \ -__IN1(t,s##c_p) __IN2(m) : "=r" (_v) : "ir" (port), "r" (mips_io_port_base)); SLOW_DOWN_IO; return __ioswab##w(_v); } - -#define __INS1(s) \ -static inline void __ins##s(unsigned int port, void * addr, unsigned long count) { - -#define __INS2(m) \ -if (count) \ -__asm__ __volatile__ ( \ - ".set\tnoreorder\n\t" \ - ".set\tnoat\n" \ - "1:\tl" #m "\t$1,%4(%5)\n\t" \ - "subu\t%1,1\n\t" \ - "s" #m "\t$1,(%0)\n\t" \ - "bne\t$0,%1,1b\n\t" \ - "addiu\t%0,%6\n\t" \ - ".set\tat\n\t" \ - ".set\treorder" - -#define __INS(m,s,i) \ -__INS1(s) __INS2(m) \ - : "=r" (addr), "=r" (count) \ - : "0" (addr), "1" (count), "i" (0), \ - "r" (mips_io_port_base+port), "I" (i) \ - : "$1");} \ -__INS1(s##c) __INS2(m) \ - : "=r" (addr), "=r" (count) \ - : "0" (addr), "1" (count), "ir" (port), \ - "r" (mips_io_port_base), "I" (i) \ - : "$1");} - -#define __OUTS1(s) \ -static inline void __outs##s(unsigned int port, const void * addr, unsigned long count) { - -#define __OUTS2(m) \ -if (count) \ -__asm__ __volatile__ ( \ - ".set\tnoreorder\n\t" \ - ".set\tnoat\n" \ - "1:\tl" #m "\t$1,(%0)\n\t" \ - "subu\t%1,1\n\t" \ - "s" #m "\t$1,%4(%5)\n\t" \ - "bne\t$0,%1,1b\n\t" \ - "addiu\t%0,%6\n\t" \ - ".set\tat\n\t" \ - ".set\treorder" - -#define __OUTS(m,s,i) \ -__OUTS1(s) __OUTS2(m) \ - : "=r" (addr), "=r" (count) \ - : "0" (addr), "1" (count), "i" (0), "r" (mips_io_port_base+port), "I" (i) \ - : "$1");} \ -__OUTS1(s##c) __OUTS2(m) \ - : "=r" (addr), "=r" (count) \ - : "0" (addr), "1" (count), "ir" (port), "r" (mips_io_port_base), "I" (i) \ - : "$1");} - -__IN(unsigned char,b,b,8) -__IN(unsigned short,h,w,16) -__IN(unsigned int,w,l,32) - -__OUT(b,b,8) -__OUT(h,w,16) -__OUT(w,l,32) - -__INS(b,b,1) -__INS(h,w,2) -__INS(w,l,4) - -__OUTS(b,b,1) -__OUTS(h,w,2) -__OUTS(w,l,4) +#define readq readq +#define writeq writeq + +#define __BUILD_MEMORY_STRING(bwlq, type) \ + \ +static inline void writes##bwlq(volatile void __iomem *mem, \ + const void *addr, unsigned int count) \ +{ \ + const volatile type *__addr = addr; \ + \ + while (count--) { \ + __mem_write##bwlq(*__addr, mem); \ + __addr++; \ + } \ +} \ + \ +static inline void reads##bwlq(volatile void __iomem *mem, void *addr, \ + unsigned int count) \ +{ \ + volatile type *__addr = addr; \ + \ + while (count--) { \ + *__addr = __mem_read##bwlq(mem); \ + __addr++; \ + } \ +} +#define __BUILD_IOPORT_STRING(bwlq, type) \ + \ +static inline void outs##bwlq(unsigned long port, const void *addr, \ + unsigned int count) \ +{ \ + const volatile type *__addr = addr; \ + \ + while (count--) { \ + __mem_out##bwlq(*__addr, port); \ + __addr++; \ + } \ +} \ + \ +static inline void ins##bwlq(unsigned long port, void *addr, \ + unsigned int count) \ +{ \ + volatile type *__addr = addr; \ + \ + while (count--) { \ + *__addr = __mem_in##bwlq(port); \ + __addr++; \ + } \ +} -/* - * Note that due to the way __builtin_constant_p() works, you - * - can't use it inside an inline function (it will never be true) - * - you don't have to worry about side effects within the __builtin.. - */ -#define outb(val,port) \ -((__builtin_constant_p((port)) && (port) < 32768) ? \ - __outbc((val),(port)) : \ - __outb((val),(port))) - -#define inb(port) \ -((__builtin_constant_p((port)) && (port) < 32768) ? \ - __inbc(port) : \ - __inb(port)) - -#define outb_p(val,port) \ -((__builtin_constant_p((port)) && (port) < 32768) ? \ - __outbc_p((val),(port)) : \ - __outb_p((val),(port))) - -#define inb_p(port) \ -((__builtin_constant_p((port)) && (port) < 32768) ? \ - __inbc_p(port) : \ - __inb_p(port)) - -#define outw(val,port) \ -((__builtin_constant_p((port)) && (port) < 32768) ? \ - __outwc((val),(port)) : \ - __outw((val),(port))) - -#define inw(port) \ -((__builtin_constant_p((port)) && (port) < 32768) ? \ - __inwc(port) : \ - __inw(port)) - -#define outw_p(val,port) \ -((__builtin_constant_p((port)) && (port) < 32768) ? \ - __outwc_p((val),(port)) : \ - __outw_p((val),(port))) - -#define inw_p(port) \ -((__builtin_constant_p((port)) && (port) < 32768) ? \ - __inwc_p(port) : \ - __inw_p(port)) - -#define outl(val,port) \ -((__builtin_constant_p((port)) && (port) < 32768) ? \ - __outlc((val),(port)) : \ - __outl((val),(port))) - -#define inl(port) \ -((__builtin_constant_p((port)) && (port) < 32768) ? \ - __inlc(port) : \ - __inl(port)) - -#define outl_p(val,port) \ -((__builtin_constant_p((port)) && (port) < 32768) ? \ - __outlc_p((val),(port)) : \ - __outl_p((val),(port))) - -#define inl_p(port) \ -((__builtin_constant_p((port)) && (port) < 32768) ? \ - __inlc_p(port) : \ - __inl_p(port)) - - -#define outsb(port,addr,count) \ -((__builtin_constant_p((port)) && (port) < 32768) ? \ - __outsbc((port),(addr),(count)) : \ - __outsb ((port),(addr),(count))) - -#define insb(port,addr,count) \ -((__builtin_constant_p((port)) && (port) < 32768) ? \ - __insbc((port),(addr),(count)) : \ - __insb((port),(addr),(count))) - -#define outsw(port,addr,count) \ -((__builtin_constant_p((port)) && (port) < 32768) ? \ - __outswc((port),(addr),(count)) : \ - __outsw ((port),(addr),(count))) - -#define insw(port,addr,count) \ -((__builtin_constant_p((port)) && (port) < 32768) ? \ - __inswc((port),(addr),(count)) : \ - __insw((port),(addr),(count))) - -#define outsl(port,addr,count) \ -((__builtin_constant_p((port)) && (port) < 32768) ? \ - __outslc((port),(addr),(count)) : \ - __outsl ((port),(addr),(count))) - -#define insl(port,addr,count) \ -((__builtin_constant_p((port)) && (port) < 32768) ? \ - __inslc((port),(addr),(count)) : \ - __insl((port),(addr),(count))) +#define BUILDSTRING(bwlq, type) \ + \ +__BUILD_MEMORY_STRING(bwlq, type) \ +__BUILD_IOPORT_STRING(bwlq, type) -#define IO_SPACE_LIMIT 0xffff +BUILDSTRING(b, u8) +BUILDSTRING(w, u16) +BUILDSTRING(l, u32) +#ifdef CONFIG_64BIT +BUILDSTRING(q, u64) +#endif -/* - * The caches on some architectures aren't dma-coherent and have need to - * handle this in software. There are three types of operations that - * can be applied to dma buffers. - * - * - dma_cache_wback_inv(start, size) makes caches and coherent by - * writing the content of the caches back to memory, if necessary. - * The function also invalidates the affected part of the caches as - * necessary before DMA transfers from outside to memory. - * - dma_cache_wback(start, size) makes caches and coherent by - * writing the content of the caches back to memory, if necessary. - * The function also invalidates the affected part of the caches as - * necessary before DMA transfers from outside to memory. - * - dma_cache_inv(start, size) invalidates the affected parts of the - * caches. Dirty lines of the caches may be written back or simply - * be discarded. This operation is necessary before dma operations - * to the memory. - */ -extern void (*_dma_cache_wback_inv)(unsigned long start, unsigned long size); -extern void (*_dma_cache_wback)(unsigned long start, unsigned long size); -extern void (*_dma_cache_inv)(unsigned long start, unsigned long size); -#define dma_cache_wback_inv(start,size) _dma_cache_wback_inv(start,size) -#define dma_cache_wback(start,size) _dma_cache_wback(start,size) -#define dma_cache_inv(start,size) _dma_cache_inv(start,size) +#ifdef CONFIG_CPU_CAVIUM_OCTEON +#define mmiowb() wmb() +#else +/* Depends on MIPS II instruction set */ +#define mmiowb() asm volatile ("sync" ::: "memory") +#endif -static inline void sync(void) +static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count) +{ + memset((void __force *)addr, val, count); +} +static inline void memcpy_fromio(void *dst, const volatile void __iomem *src, int count) +{ + memcpy(dst, (void __force *)src, count); +} +static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int count) { + memcpy((void __force *)dst, src, count); } /* - * Given a physical address and a length, return a virtual address - * that can be used to access the memory range with the caching - * properties specified by "flags". + * Read a 32-bit register that requires a 64-bit read cycle on the bus. + * Avoid interrupt mucking, just adjust the address for 4-byte access. + * Assume the addresses are 8-byte aligned. + */ +#ifdef __MIPSEB__ +#define __CSR_32_ADJUST 4 +#else +#define __CSR_32_ADJUST 0 +#endif + +#define csr_out32(v, a) (*(volatile u32 *)((unsigned long)(a) + __CSR_32_ADJUST) = (v)) +#define csr_in32(a) (*(volatile u32 *)((unsigned long)(a) + __CSR_32_ADJUST)) + +/* + * U-Boot specific */ -#define MAP_NOCACHE (0) +#define sync() mmiowb() + +#define MAP_NOCACHE (1) #define MAP_WRCOMBINE (0) #define MAP_WRBACK (0) #define MAP_WRTHROUGH (0) @@ -493,6 +528,9 @@ static inline void sync(void) static inline void * map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags) { + if (flags == MAP_NOCACHE) + return ioremap(paddr, len); + return (void *)paddr; } @@ -501,7 +539,61 @@ map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags) */ static inline void unmap_physmem(void *vaddr, unsigned long flags) { +} +#define __BUILD_CLRBITS(bwlq, sfx, end, type) \ + \ +static inline void clrbits_##sfx(volatile void __iomem *mem, type clr) \ +{ \ + type __val = __raw_read##bwlq(mem); \ + __val = end##_to_cpu(__val); \ + __val &= ~clr; \ + __val = cpu_to_##end(__val); \ + __raw_write##bwlq(__val, mem); \ } +#define __BUILD_SETBITS(bwlq, sfx, end, type) \ + \ +static inline void setbits_##sfx(volatile void __iomem *mem, type set) \ +{ \ + type __val = __raw_read##bwlq(mem); \ + __val = end##_to_cpu(__val); \ + __val |= set; \ + __val = cpu_to_##end(__val); \ + __raw_write##bwlq(__val, mem); \ +} + +#define __BUILD_CLRSETBITS(bwlq, sfx, end, type) \ + \ +static inline void clrsetbits_##sfx(volatile void __iomem *mem, \ + type clr, type set) \ +{ \ + type __val = __raw_read##bwlq(mem); \ + __val = end##_to_cpu(__val); \ + __val &= ~clr; \ + __val |= set; \ + __val = cpu_to_##end(__val); \ + __raw_write##bwlq(__val, mem); \ +} + +#define BUILD_CLRSETBITS(bwlq, sfx, end, type) \ + \ +__BUILD_CLRBITS(bwlq, sfx, end, type) \ +__BUILD_SETBITS(bwlq, sfx, end, type) \ +__BUILD_CLRSETBITS(bwlq, sfx, end, type) + +#define __to_cpu(v) (v) +#define cpu_to__(v) (v) + +BUILD_CLRSETBITS(b, 8, _, u8) +BUILD_CLRSETBITS(w, le16, le16, u16) +BUILD_CLRSETBITS(w, be16, be16, u16) +BUILD_CLRSETBITS(w, 16, _, u16) +BUILD_CLRSETBITS(l, le32, le32, u32) +BUILD_CLRSETBITS(l, be32, be32, u32) +BUILD_CLRSETBITS(l, 32, _, u32) +BUILD_CLRSETBITS(q, le64, le64, u64) +BUILD_CLRSETBITS(q, be64, be64, u64) +BUILD_CLRSETBITS(q, 64, _, u64) + #endif /* _ASM_IO_H */ diff --git a/arch/mips/include/asm/isadep.h b/arch/mips/include/asm/isadep.h index 24c6cda7937..3d79ebcf593 100644 --- a/arch/mips/include/asm/isadep.h +++ b/arch/mips/include/asm/isadep.h @@ -4,6 +4,8 @@ * of Coprocessor 0 registers. * * Copyright (c) 1998 Harald Koerfgen + * + * SPDX-License-Identifier: GPL-2.0 */ #ifndef __ASM_ISADEP_H @@ -18,7 +20,7 @@ * kernel or user mode? (CP0_STATUS) */ #define KU_MASK 0x08 -#define KU_USER 0x08 +#define KU_USER 0x08 #define KU_KERN 0x00 #else @@ -26,7 +28,7 @@ * kernel or user mode? */ #define KU_MASK 0x18 -#define KU_USER 0x10 +#define KU_USER 0x10 #define KU_KERN 0x00 #endif diff --git a/arch/mips/include/asm/mach-generic/cpu-feature-overrides.h b/arch/mips/include/asm/mach-generic/cpu-feature-overrides.h new file mode 100644 index 00000000000..613f844f08c --- /dev/null +++ b/arch/mips/include/asm/mach-generic/cpu-feature-overrides.h @@ -0,0 +1,11 @@ +/* + * Copyright (C) 2003 Ralf Baechle + * + * SPDX-License-Identifier: GPL-2.0 + */ +#ifndef __ASM_MACH_GENERIC_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_GENERIC_CPU_FEATURE_OVERRIDES_H + +/* Intentionally empty file ... */ + +#endif /* __ASM_MACH_GENERIC_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-generic/ioremap.h b/arch/mips/include/asm/mach-generic/ioremap.h new file mode 100644 index 00000000000..6b191d54a69 --- /dev/null +++ b/arch/mips/include/asm/mach-generic/ioremap.h @@ -0,0 +1,32 @@ +/* + * SPDX-License-Identifier: GPL-2.0 + */ +#ifndef __ASM_MACH_GENERIC_IOREMAP_H +#define __ASM_MACH_GENERIC_IOREMAP_H + +#include <linux/types.h> + +/* + * Allow physical addresses to be fixed up to help peripherals located + * outside the low 32-bit range -- generic pass-through version. + */ +static inline phys_addr_t fixup_bigphys_addr(phys_addr_t phys_addr, + phys_addr_t size) +{ + return phys_addr; +} + +static inline void __iomem *plat_ioremap(phys_addr_t offset, unsigned long size, + unsigned long flags) +{ + return NULL; +} + +static inline int plat_iounmap(const volatile void __iomem *addr) +{ + return 0; +} + +#define _page_cachable_default _CACHE_CACHABLE_NONCOHERENT + +#endif /* __ASM_MACH_GENERIC_IOREMAP_H */ diff --git a/arch/mips/include/asm/mach-generic/mangle-port.h b/arch/mips/include/asm/mach-generic/mangle-port.h new file mode 100644 index 00000000000..f18e53f7b83 --- /dev/null +++ b/arch/mips/include/asm/mach-generic/mangle-port.h @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2003, 2004 Ralf Baechle + * + * SPDX-License-Identifier: GPL-2.0 + */ +#ifndef __ASM_MACH_GENERIC_MANGLE_PORT_H +#define __ASM_MACH_GENERIC_MANGLE_PORT_H + +#define __swizzle_addr_b(port) (port) +#define __swizzle_addr_w(port) (port) +#define __swizzle_addr_l(port) (port) +#define __swizzle_addr_q(port) (port) + +/* + * Sane hardware offers swapping of PCI/ISA I/O space accesses in hardware; + * less sane hardware forces software to fiddle with this... + * + * Regardless, if the host bus endianness mismatches that of PCI/ISA, then + * you can't have the numerical value of data and byte addresses within + * multibyte quantities both preserved at the same time. Hence two + * variations of functions: non-prefixed ones that preserve the value + * and prefixed ones that preserve byte addresses. The latters are + * typically used for moving raw data between a peripheral and memory (cf. + * string I/O functions), hence the "__mem_" prefix. + */ +#if defined(CONFIG_SWAP_IO_SPACE) + +# define ioswabb(a, x) (x) +# define __mem_ioswabb(a, x) (x) +# define ioswabw(a, x) le16_to_cpu(x) +# define __mem_ioswabw(a, x) (x) +# define ioswabl(a, x) le32_to_cpu(x) +# define __mem_ioswabl(a, x) (x) +# define ioswabq(a, x) le64_to_cpu(x) +# define __mem_ioswabq(a, x) (x) + +#else + +# define ioswabb(a, x) (x) +# define __mem_ioswabb(a, x) (x) +# define ioswabw(a, x) (x) +# define __mem_ioswabw(a, x) cpu_to_le16(x) +# define ioswabl(a, x) (x) +# define __mem_ioswabl(a, x) cpu_to_le32(x) +# define ioswabq(a, x) (x) +# define __mem_ioswabq(a, x) cpu_to_le32(x) + +#endif + +#endif /* __ASM_MACH_GENERIC_MANGLE_PORT_H */ diff --git a/arch/mips/include/asm/mach-generic/spaces.h b/arch/mips/include/asm/mach-generic/spaces.h new file mode 100644 index 00000000000..ab06674b144 --- /dev/null +++ b/arch/mips/include/asm/mach-generic/spaces.h @@ -0,0 +1,102 @@ +/* + * Copyright (C) 1994 - 1999, 2000, 03, 04 Ralf Baechle + * Copyright (C) 2000, 2002 Maciej W. Rozycki + * Copyright (C) 1990, 1999, 2000 Silicon Graphics, Inc. + * + * SPDX-License-Identifier: GPL-2.0 + */ +#ifndef _ASM_MACH_GENERIC_SPACES_H +#define _ASM_MACH_GENERIC_SPACES_H + +#include <asm/const.h> + +/* + * This gives the physical RAM offset. + */ +#ifndef PHYS_OFFSET +#define PHYS_OFFSET _AC(0, UL) +#endif + +#ifdef CONFIG_32BIT +#ifdef CONFIG_KVM_GUEST +#define CAC_BASE _AC(0x40000000, UL) +#else +#define CAC_BASE _AC(0x80000000, UL) +#endif +#ifndef IO_BASE +#define IO_BASE _AC(0xa0000000, UL) +#endif +#ifndef UNCAC_BASE +#define UNCAC_BASE _AC(0xa0000000, UL) +#endif + +#ifndef MAP_BASE +#ifdef CONFIG_KVM_GUEST +#define MAP_BASE _AC(0x60000000, UL) +#else +#define MAP_BASE _AC(0xc0000000, UL) +#endif +#endif + +/* + * Memory above this physical address will be considered highmem. + */ +#ifndef HIGHMEM_START +#define HIGHMEM_START _AC(0x20000000, UL) +#endif + +#endif /* CONFIG_32BIT */ + +#ifdef CONFIG_64BIT + +#ifndef CAC_BASE +#ifdef CONFIG_DMA_NONCOHERENT +#define CAC_BASE _AC(0x9800000000000000, UL) +#else +#define CAC_BASE _AC(0xa800000000000000, UL) +#endif +#endif + +#ifndef IO_BASE +#define IO_BASE _AC(0x9000000000000000, UL) +#endif + +#ifndef UNCAC_BASE +#define UNCAC_BASE _AC(0x9000000000000000, UL) +#endif + +#ifndef MAP_BASE +#define MAP_BASE _AC(0xc000000000000000, UL) +#endif + +/* + * Memory above this physical address will be considered highmem. + * Fixme: 59 bits is a fictive number and makes assumptions about processors + * in the distant future. Nobody will care for a few years :-) + */ +#ifndef HIGHMEM_START +#define HIGHMEM_START (_AC(1, UL) << _AC(59, UL)) +#endif + +#define TO_PHYS(x) ( ((x) & TO_PHYS_MASK)) +#define TO_CAC(x) (CAC_BASE | ((x) & TO_PHYS_MASK)) +#define TO_UNCAC(x) (UNCAC_BASE | ((x) & TO_PHYS_MASK)) + +#endif /* CONFIG_64BIT */ + +/* + * This handles the memory map. + */ +#ifndef PAGE_OFFSET +#define PAGE_OFFSET (CAC_BASE + PHYS_OFFSET) +#endif + +#ifndef FIXADDR_TOP +#ifdef CONFIG_KVM_GUEST +#define FIXADDR_TOP ((unsigned long)(long)(int)0x7ffe0000) +#else +#define FIXADDR_TOP ((unsigned long)(long)(int)0xfffe0000) +#endif +#endif + +#endif /* __ASM_MACH_GENERIC_SPACES_H */ diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index c7a08499ff2..3185dc7abf2 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -1,22 +1,16 @@ /* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * * Copyright (C) 1994, 1995, 1996, 1997, 2000, 2001 by Ralf Baechle * Copyright (C) 2000 Silicon Graphics, Inc. * Modified for further R[236]000 support by Paul M. Antoine, 1996. * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com * Copyright (C) 2000, 07 MIPS Technologies, Inc. * Copyright (C) 2003, 2004 Maciej W. Rozycki + * + * SPDX-License-Identifier: GPL-2.0 */ #ifndef _ASM_MIPSREGS_H #define _ASM_MIPSREGS_H -#if 0 -#include <linux/linkage.h> -#endif - /* * The following macros are especially useful for __asm__ * inline assembler. @@ -49,7 +43,9 @@ #define CP0_PAGEMASK $5 #define CP0_WIRED $6 #define CP0_INFO $7 +#define CP0_HWRENA $7, 0 #define CP0_BADVADDR $8 +#define CP0_BADINSTR $8, 1 #define CP0_COUNT $9 #define CP0_ENTRYHI $10 #define CP0_COMPARE $11 @@ -57,7 +53,11 @@ #define CP0_CAUSE $13 #define CP0_EPC $14 #define CP0_PRID $15 +#define CP0_EBASE $15, 1 +#define CP0_CMGCRBASE $15, 3 #define CP0_CONFIG $16 +#define CP0_CONFIG3 $16, 3 +#define CP0_CONFIG5 $16, 5 #define CP0_LLADDR $17 #define CP0_WATCHLO $18 #define CP0_WATCHHI $19 @@ -98,74 +98,36 @@ /* * Coprocessor 0 Set 2 register names */ -#define CP0_S2_SRSCTL $12 /* MIPSR2 */ +#define CP0_S2_SRSCTL $12 /* MIPSR2 */ /* * Coprocessor 0 Set 3 register names */ -#define CP0_S3_SRSMAP $12 /* MIPSR2 */ +#define CP0_S3_SRSMAP $12 /* MIPSR2 */ /* * TX39 Series */ #define CP0_TX39_CACHE $7 -/* - * Coprocessor 1 (FPU) register names - */ -#define CP1_REVISION $0 -#define CP1_STATUS $31 -/* - * FPU Status Register Values - */ -/* - * Status Register Values - */ +/* Generic EntryLo bit definitions */ +#define ENTRYLO_G (_ULCAST_(1) << 0) +#define ENTRYLO_V (_ULCAST_(1) << 1) +#define ENTRYLO_D (_ULCAST_(1) << 2) +#define ENTRYLO_C_SHIFT 3 +#define ENTRYLO_C (_ULCAST_(7) << ENTRYLO_C_SHIFT) -#define FPU_CSR_FLUSH 0x01000000 /* flush denormalised results to 0 */ -#define FPU_CSR_COND 0x00800000 /* $fcc0 */ -#define FPU_CSR_COND0 0x00800000 /* $fcc0 */ -#define FPU_CSR_COND1 0x02000000 /* $fcc1 */ -#define FPU_CSR_COND2 0x04000000 /* $fcc2 */ -#define FPU_CSR_COND3 0x08000000 /* $fcc3 */ -#define FPU_CSR_COND4 0x10000000 /* $fcc4 */ -#define FPU_CSR_COND5 0x20000000 /* $fcc5 */ -#define FPU_CSR_COND6 0x40000000 /* $fcc6 */ -#define FPU_CSR_COND7 0x80000000 /* $fcc7 */ +/* R3000 EntryLo bit definitions */ +#define R3K_ENTRYLO_G (_ULCAST_(1) << 8) +#define R3K_ENTRYLO_V (_ULCAST_(1) << 9) +#define R3K_ENTRYLO_D (_ULCAST_(1) << 10) +#define R3K_ENTRYLO_N (_ULCAST_(1) << 11) -/* - * X the exception cause indicator - * E the exception enable - * S the sticky/flag bit - */ -#define FPU_CSR_ALL_X 0x0003f000 -#define FPU_CSR_UNI_X 0x00020000 -#define FPU_CSR_INV_X 0x00010000 -#define FPU_CSR_DIV_X 0x00008000 -#define FPU_CSR_OVF_X 0x00004000 -#define FPU_CSR_UDF_X 0x00002000 -#define FPU_CSR_INE_X 0x00001000 - -#define FPU_CSR_ALL_E 0x00000f80 -#define FPU_CSR_INV_E 0x00000800 -#define FPU_CSR_DIV_E 0x00000400 -#define FPU_CSR_OVF_E 0x00000200 -#define FPU_CSR_UDF_E 0x00000100 -#define FPU_CSR_INE_E 0x00000080 - -#define FPU_CSR_ALL_S 0x0000007c -#define FPU_CSR_INV_S 0x00000040 -#define FPU_CSR_DIV_S 0x00000020 -#define FPU_CSR_OVF_S 0x00000010 -#define FPU_CSR_UDF_S 0x00000008 -#define FPU_CSR_INE_S 0x00000004 - -/* rounding mode */ -#define FPU_CSR_RN 0x0 /* nearest */ -#define FPU_CSR_RZ 0x1 /* towards zero */ -#define FPU_CSR_RU 0x2 /* towards +Infinity */ -#define FPU_CSR_RD 0x3 /* towards -Infinity */ +/* MIPS32/64 EntryLo bit definitions */ +#define MIPS_ENTRYLO_PFN_SHIFT 6 +#define MIPS_ENTRYLO_XI (_ULCAST_(1) << (BITS_PER_LONG - 2)) +#define MIPS_ENTRYLO_RI (_ULCAST_(1) << (BITS_PER_LONG - 1)) /* * Values for PageMask register @@ -183,14 +145,22 @@ #else #define PM_4K 0x00000000 +#define PM_8K 0x00002000 #define PM_16K 0x00006000 +#define PM_32K 0x0000e000 #define PM_64K 0x0001e000 +#define PM_128K 0x0003e000 #define PM_256K 0x0007e000 +#define PM_512K 0x000fe000 #define PM_1M 0x001fe000 +#define PM_2M 0x003fe000 #define PM_4M 0x007fe000 +#define PM_8M 0x00ffe000 #define PM_16M 0x01ffe000 +#define PM_32M 0x03ffe000 #define PM_64M 0x07ffe000 #define PM_256M 0x1fffe000 +#define PM_1G 0x7fffe000 #endif @@ -208,10 +178,22 @@ #define PL_256M 28 /* + * PageGrain bits + */ +#define PG_RIE (_ULCAST_(1) << 31) +#define PG_XIE (_ULCAST_(1) << 30) +#define PG_ELPA (_ULCAST_(1) << 29) +#define PG_ESP (_ULCAST_(1) << 28) +#define PG_IEC (_ULCAST_(1) << 27) + +/* MIPS32/64 EntryHI bit definitions */ +#define MIPS_ENTRYHI_EHINV (_ULCAST_(1) << 10) + +/* * R4x00 interrupt enable / cause bits */ -#define IE_SW0 (_ULCAST_(1) << 8) -#define IE_SW1 (_ULCAST_(1) << 9) +#define IE_SW0 (_ULCAST_(1) << 8) +#define IE_SW1 (_ULCAST_(1) << 9) #define IE_IRQ0 (_ULCAST_(1) << 10) #define IE_IRQ1 (_ULCAST_(1) << 11) #define IE_IRQ2 (_ULCAST_(1) << 12) @@ -222,8 +204,8 @@ /* * R4x00 interrupt cause bits */ -#define C_SW0 (_ULCAST_(1) << 8) -#define C_SW1 (_ULCAST_(1) << 9) +#define C_SW0 (_ULCAST_(1) << 8) +#define C_SW1 (_ULCAST_(1) << 9) #define C_IRQ0 (_ULCAST_(1) << 10) #define C_IRQ1 (_ULCAST_(1) << 11) #define C_IRQ2 (_ULCAST_(1) << 12) @@ -271,7 +253,7 @@ /* * Bits specific to the R4640/R4650 */ -#define ST0_UM (_ULCAST_(1) << 4) +#define ST0_UM (_ULCAST_(1) << 4) #define ST0_IL (_ULCAST_(1) << 23) #define ST0_DL (_ULCAST_(1) << 24) @@ -281,75 +263,43 @@ #define ST0_MX 0x01000000 /* - * Bitfields in the TX39 family CP0 Configuration Register 3 - */ -#define TX39_CONF_ICS_SHIFT 19 -#define TX39_CONF_ICS_MASK 0x00380000 -#define TX39_CONF_ICS_1KB 0x00000000 -#define TX39_CONF_ICS_2KB 0x00080000 -#define TX39_CONF_ICS_4KB 0x00100000 -#define TX39_CONF_ICS_8KB 0x00180000 -#define TX39_CONF_ICS_16KB 0x00200000 - -#define TX39_CONF_DCS_SHIFT 16 -#define TX39_CONF_DCS_MASK 0x00070000 -#define TX39_CONF_DCS_1KB 0x00000000 -#define TX39_CONF_DCS_2KB 0x00010000 -#define TX39_CONF_DCS_4KB 0x00020000 -#define TX39_CONF_DCS_8KB 0x00030000 -#define TX39_CONF_DCS_16KB 0x00040000 - -#define TX39_CONF_CWFON 0x00004000 -#define TX39_CONF_WBON 0x00002000 -#define TX39_CONF_RF_SHIFT 10 -#define TX39_CONF_RF_MASK 0x00000c00 -#define TX39_CONF_DOZE 0x00000200 -#define TX39_CONF_HALT 0x00000100 -#define TX39_CONF_LOCK 0x00000080 -#define TX39_CONF_ICE 0x00000020 -#define TX39_CONF_DCE 0x00000010 -#define TX39_CONF_IRSIZE_SHIFT 2 -#define TX39_CONF_IRSIZE_MASK 0x0000000c -#define TX39_CONF_DRSIZE_SHIFT 0 -#define TX39_CONF_DRSIZE_MASK 0x00000003 - -/* * Status register bits available in all MIPS CPUs. */ #define ST0_IM 0x0000ff00 -#define STATUSB_IP0 8 -#define STATUSF_IP0 (_ULCAST_(1) << 8) -#define STATUSB_IP1 9 -#define STATUSF_IP1 (_ULCAST_(1) << 9) -#define STATUSB_IP2 10 -#define STATUSF_IP2 (_ULCAST_(1) << 10) -#define STATUSB_IP3 11 -#define STATUSF_IP3 (_ULCAST_(1) << 11) -#define STATUSB_IP4 12 -#define STATUSF_IP4 (_ULCAST_(1) << 12) -#define STATUSB_IP5 13 -#define STATUSF_IP5 (_ULCAST_(1) << 13) -#define STATUSB_IP6 14 -#define STATUSF_IP6 (_ULCAST_(1) << 14) -#define STATUSB_IP7 15 -#define STATUSF_IP7 (_ULCAST_(1) << 15) -#define STATUSB_IP8 0 -#define STATUSF_IP8 (_ULCAST_(1) << 0) -#define STATUSB_IP9 1 -#define STATUSF_IP9 (_ULCAST_(1) << 1) -#define STATUSB_IP10 2 -#define STATUSF_IP10 (_ULCAST_(1) << 2) -#define STATUSB_IP11 3 -#define STATUSF_IP11 (_ULCAST_(1) << 3) -#define STATUSB_IP12 4 -#define STATUSF_IP12 (_ULCAST_(1) << 4) -#define STATUSB_IP13 5 -#define STATUSF_IP13 (_ULCAST_(1) << 5) -#define STATUSB_IP14 6 -#define STATUSF_IP14 (_ULCAST_(1) << 6) -#define STATUSB_IP15 7 -#define STATUSF_IP15 (_ULCAST_(1) << 7) +#define STATUSB_IP0 8 +#define STATUSF_IP0 (_ULCAST_(1) << 8) +#define STATUSB_IP1 9 +#define STATUSF_IP1 (_ULCAST_(1) << 9) +#define STATUSB_IP2 10 +#define STATUSF_IP2 (_ULCAST_(1) << 10) +#define STATUSB_IP3 11 +#define STATUSF_IP3 (_ULCAST_(1) << 11) +#define STATUSB_IP4 12 +#define STATUSF_IP4 (_ULCAST_(1) << 12) +#define STATUSB_IP5 13 +#define STATUSF_IP5 (_ULCAST_(1) << 13) +#define STATUSB_IP6 14 +#define STATUSF_IP6 (_ULCAST_(1) << 14) +#define STATUSB_IP7 15 +#define STATUSF_IP7 (_ULCAST_(1) << 15) +#define STATUSB_IP8 0 +#define STATUSF_IP8 (_ULCAST_(1) << 0) +#define STATUSB_IP9 1 +#define STATUSF_IP9 (_ULCAST_(1) << 1) +#define STATUSB_IP10 2 +#define STATUSF_IP10 (_ULCAST_(1) << 2) +#define STATUSB_IP11 3 +#define STATUSF_IP11 (_ULCAST_(1) << 3) +#define STATUSB_IP12 4 +#define STATUSF_IP12 (_ULCAST_(1) << 4) +#define STATUSB_IP13 5 +#define STATUSF_IP13 (_ULCAST_(1) << 5) +#define STATUSB_IP14 6 +#define STATUSF_IP14 (_ULCAST_(1) << 6) +#define STATUSB_IP15 7 +#define STATUSF_IP15 (_ULCAST_(1) << 7) #define ST0_CH 0x00040000 +#define ST0_NMI 0x00080000 #define ST0_SR 0x00100000 #define ST0_TS 0x00200000 #define ST0_BEV 0x00400000 @@ -363,36 +313,52 @@ #define ST0_XX 0x80000000 /* MIPS IV naming */ /* + * Bitfields and bit numbers in the coprocessor 0 IntCtl register. (MIPSR2) + */ +#define INTCTLB_IPFDC 23 +#define INTCTLF_IPFDC (_ULCAST_(7) << INTCTLB_IPFDC) +#define INTCTLB_IPPCI 26 +#define INTCTLF_IPPCI (_ULCAST_(7) << INTCTLB_IPPCI) +#define INTCTLB_IPTI 29 +#define INTCTLF_IPTI (_ULCAST_(7) << INTCTLB_IPTI) + +/* * Bitfields and bit numbers in the coprocessor 0 cause register. * * Refer to your MIPS R4xx0 manual, chapter 5 for explanation. */ -#define CAUSEB_EXCCODE 2 -#define CAUSEF_EXCCODE (_ULCAST_(31) << 2) -#define CAUSEB_IP 8 -#define CAUSEF_IP (_ULCAST_(255) << 8) -#define CAUSEB_IP0 8 -#define CAUSEF_IP0 (_ULCAST_(1) << 8) -#define CAUSEB_IP1 9 -#define CAUSEF_IP1 (_ULCAST_(1) << 9) -#define CAUSEB_IP2 10 -#define CAUSEF_IP2 (_ULCAST_(1) << 10) -#define CAUSEB_IP3 11 -#define CAUSEF_IP3 (_ULCAST_(1) << 11) -#define CAUSEB_IP4 12 -#define CAUSEF_IP4 (_ULCAST_(1) << 12) -#define CAUSEB_IP5 13 -#define CAUSEF_IP5 (_ULCAST_(1) << 13) -#define CAUSEB_IP6 14 -#define CAUSEF_IP6 (_ULCAST_(1) << 14) -#define CAUSEB_IP7 15 -#define CAUSEF_IP7 (_ULCAST_(1) << 15) -#define CAUSEB_IV 23 -#define CAUSEF_IV (_ULCAST_(1) << 23) -#define CAUSEB_CE 28 -#define CAUSEF_CE (_ULCAST_(3) << 28) -#define CAUSEB_BD 31 -#define CAUSEF_BD (_ULCAST_(1) << 31) +#define CAUSEB_EXCCODE 2 +#define CAUSEF_EXCCODE (_ULCAST_(31) << 2) +#define CAUSEB_IP 8 +#define CAUSEF_IP (_ULCAST_(255) << 8) +#define CAUSEB_IP0 8 +#define CAUSEF_IP0 (_ULCAST_(1) << 8) +#define CAUSEB_IP1 9 +#define CAUSEF_IP1 (_ULCAST_(1) << 9) +#define CAUSEB_IP2 10 +#define CAUSEF_IP2 (_ULCAST_(1) << 10) +#define CAUSEB_IP3 11 +#define CAUSEF_IP3 (_ULCAST_(1) << 11) +#define CAUSEB_IP4 12 +#define CAUSEF_IP4 (_ULCAST_(1) << 12) +#define CAUSEB_IP5 13 +#define CAUSEF_IP5 (_ULCAST_(1) << 13) +#define CAUSEB_IP6 14 +#define CAUSEF_IP6 (_ULCAST_(1) << 14) +#define CAUSEB_IP7 15 +#define CAUSEF_IP7 (_ULCAST_(1) << 15) +#define CAUSEB_FDCI 21 +#define CAUSEF_FDCI (_ULCAST_(1) << 21) +#define CAUSEB_IV 23 +#define CAUSEF_IV (_ULCAST_(1) << 23) +#define CAUSEB_PCI 26 +#define CAUSEF_PCI (_ULCAST_(1) << 26) +#define CAUSEB_CE 28 +#define CAUSEF_CE (_ULCAST_(3) << 28) +#define CAUSEB_TI 30 +#define CAUSEF_TI (_ULCAST_(1) << 30) +#define CAUSEB_BD 31 +#define CAUSEF_BD (_ULCAST_(1) << 31) /* * Bits in the coprocessor 0 config register. @@ -410,43 +376,43 @@ #define CONF_BE (_ULCAST_(1) << 15) /* Bits common to various processors. */ -#define CONF_CU (_ULCAST_(1) << 3) -#define CONF_DB (_ULCAST_(1) << 4) -#define CONF_IB (_ULCAST_(1) << 5) -#define CONF_DC (_ULCAST_(7) << 6) -#define CONF_IC (_ULCAST_(7) << 9) +#define CONF_CU (_ULCAST_(1) << 3) +#define CONF_DB (_ULCAST_(1) << 4) +#define CONF_IB (_ULCAST_(1) << 5) +#define CONF_DC (_ULCAST_(7) << 6) +#define CONF_IC (_ULCAST_(7) << 9) #define CONF_EB (_ULCAST_(1) << 13) #define CONF_EM (_ULCAST_(1) << 14) #define CONF_SM (_ULCAST_(1) << 16) #define CONF_SC (_ULCAST_(1) << 17) #define CONF_EW (_ULCAST_(3) << 18) -#define CONF_EP (_ULCAST_(15)<< 24) +#define CONF_EP (_ULCAST_(15) << 24) #define CONF_EC (_ULCAST_(7) << 28) #define CONF_CM (_ULCAST_(1) << 31) -/* Bits specific to the R4xx0. */ +/* Bits specific to the R4xx0. */ #define R4K_CONF_SW (_ULCAST_(1) << 20) #define R4K_CONF_SS (_ULCAST_(1) << 21) #define R4K_CONF_SB (_ULCAST_(3) << 22) -/* Bits specific to the R5000. */ +/* Bits specific to the R5000. */ #define R5K_CONF_SE (_ULCAST_(1) << 12) #define R5K_CONF_SS (_ULCAST_(3) << 20) -/* Bits specific to the RM7000. */ -#define RM7K_CONF_SE (_ULCAST_(1) << 3) +/* Bits specific to the RM7000. */ +#define RM7K_CONF_SE (_ULCAST_(1) << 3) #define RM7K_CONF_TE (_ULCAST_(1) << 12) #define RM7K_CONF_CLK (_ULCAST_(1) << 16) #define RM7K_CONF_TC (_ULCAST_(1) << 17) #define RM7K_CONF_SI (_ULCAST_(3) << 20) #define RM7K_CONF_SC (_ULCAST_(1) << 31) -/* Bits specific to the R10000. */ -#define R10K_CONF_DN (_ULCAST_(3) << 3) -#define R10K_CONF_CT (_ULCAST_(1) << 5) -#define R10K_CONF_PE (_ULCAST_(1) << 6) -#define R10K_CONF_PM (_ULCAST_(3) << 7) -#define R10K_CONF_EC (_ULCAST_(15)<< 9) +/* Bits specific to the R10000. */ +#define R10K_CONF_DN (_ULCAST_(3) << 3) +#define R10K_CONF_CT (_ULCAST_(1) << 5) +#define R10K_CONF_PE (_ULCAST_(1) << 6) +#define R10K_CONF_PM (_ULCAST_(3) << 7) +#define R10K_CONF_EC (_ULCAST_(15) << 9) #define R10K_CONF_SB (_ULCAST_(1) << 13) #define R10K_CONF_SK (_ULCAST_(1) << 14) #define R10K_CONF_SS (_ULCAST_(7) << 16) @@ -454,14 +420,14 @@ #define R10K_CONF_DC (_ULCAST_(7) << 26) #define R10K_CONF_IC (_ULCAST_(7) << 29) -/* Bits specific to the VR41xx. */ +/* Bits specific to the VR41xx. */ #define VR41_CONF_CS (_ULCAST_(1) << 12) #define VR41_CONF_P4K (_ULCAST_(1) << 13) #define VR41_CONF_BP (_ULCAST_(1) << 16) #define VR41_CONF_M16 (_ULCAST_(1) << 20) #define VR41_CONF_AD (_ULCAST_(1) << 23) -/* Bits specific to the R30xx. */ +/* Bits specific to the R30xx. */ #define R30XX_CONF_FDM (_ULCAST_(1) << 19) #define R30XX_CONF_REV (_ULCAST_(1) << 22) #define R30XX_CONF_AC (_ULCAST_(1) << 23) @@ -478,8 +444,10 @@ #define TX49_CONF_HALT (_ULCAST_(1) << 18) #define TX49_CONF_CWFON (_ULCAST_(1) << 27) -/* Bits specific to the MIPS32/64 PRA. */ -#define MIPS_CONF_MT (_ULCAST_(7) << 7) +/* Bits specific to the MIPS32/64 PRA. */ +#define MIPS_CONF_MT (_ULCAST_(7) << 7) +#define MIPS_CONF_MT_TLB (_ULCAST_(1) << 7) +#define MIPS_CONF_MT_FTLB (_ULCAST_(4) << 7) #define MIPS_CONF_AR (_ULCAST_(7) << 10) #define MIPS_CONF_AT (_ULCAST_(3) << 13) #define MIPS_CONF_M (_ULCAST_(1) << 31) @@ -487,50 +455,245 @@ /* * Bits in the MIPS32/64 PRA coprocessor 0 config registers 1 and above. */ -#define MIPS_CONF1_FP (_ULCAST_(1) << 0) -#define MIPS_CONF1_EP (_ULCAST_(1) << 1) -#define MIPS_CONF1_CA (_ULCAST_(1) << 2) -#define MIPS_CONF1_WR (_ULCAST_(1) << 3) -#define MIPS_CONF1_PC (_ULCAST_(1) << 4) -#define MIPS_CONF1_MD (_ULCAST_(1) << 5) -#define MIPS_CONF1_C2 (_ULCAST_(1) << 6) -#define MIPS_CONF1_DA_SHIFT 7 -#define MIPS_CONF1_DA (_ULCAST_(7) << 7) -#define MIPS_CONF1_DL_SHIFT 10 +#define MIPS_CONF1_FP (_ULCAST_(1) << 0) +#define MIPS_CONF1_EP (_ULCAST_(1) << 1) +#define MIPS_CONF1_CA (_ULCAST_(1) << 2) +#define MIPS_CONF1_WR (_ULCAST_(1) << 3) +#define MIPS_CONF1_PC (_ULCAST_(1) << 4) +#define MIPS_CONF1_MD (_ULCAST_(1) << 5) +#define MIPS_CONF1_C2 (_ULCAST_(1) << 6) +#define MIPS_CONF1_DA_SHF 7 +#define MIPS_CONF1_DA_SZ 3 +#define MIPS_CONF1_DA (_ULCAST_(7) << 7) +#define MIPS_CONF1_DL_SHF 10 +#define MIPS_CONF1_DL_SZ 3 #define MIPS_CONF1_DL (_ULCAST_(7) << 10) -#define MIPS_CONF1_DS_SHIFT 13 +#define MIPS_CONF1_DS_SHF 13 +#define MIPS_CONF1_DS_SZ 3 #define MIPS_CONF1_DS (_ULCAST_(7) << 13) -#define MIPS_CONF1_IA_SHIFT 16 +#define MIPS_CONF1_IA_SHF 16 +#define MIPS_CONF1_IA_SZ 3 #define MIPS_CONF1_IA (_ULCAST_(7) << 16) -#define MIPS_CONF1_IL_SHIFT 19 +#define MIPS_CONF1_IL_SHF 19 +#define MIPS_CONF1_IL_SZ 3 #define MIPS_CONF1_IL (_ULCAST_(7) << 19) -#define MIPS_CONF1_IS_SHIFT 22 +#define MIPS_CONF1_IS_SHF 22 +#define MIPS_CONF1_IS_SZ 3 #define MIPS_CONF1_IS (_ULCAST_(7) << 22) -#define MIPS_CONF1_TLBS (_ULCAST_(63)<< 25) - -#define MIPS_CONF2_SA (_ULCAST_(15)<< 0) -#define MIPS_CONF2_SL (_ULCAST_(15)<< 4) -#define MIPS_CONF2_SS (_ULCAST_(15)<< 8) -#define MIPS_CONF2_SU (_ULCAST_(15)<< 12) -#define MIPS_CONF2_TA (_ULCAST_(15)<< 16) -#define MIPS_CONF2_TL (_ULCAST_(15)<< 20) -#define MIPS_CONF2_TS (_ULCAST_(15)<< 24) +#define MIPS_CONF1_TLBS_SHIFT (25) +#define MIPS_CONF1_TLBS_SIZE (6) +#define MIPS_CONF1_TLBS (_ULCAST_(63) << MIPS_CONF1_TLBS_SHIFT) + +#define MIPS_CONF2_SA (_ULCAST_(15) << 0) +#define MIPS_CONF2_SL (_ULCAST_(15) << 4) +#define MIPS_CONF2_SS (_ULCAST_(15) << 8) +#define MIPS_CONF2_SU (_ULCAST_(15) << 12) +#define MIPS_CONF2_TA (_ULCAST_(15) << 16) +#define MIPS_CONF2_TL (_ULCAST_(15) << 20) +#define MIPS_CONF2_TS (_ULCAST_(15) << 24) #define MIPS_CONF2_TU (_ULCAST_(7) << 28) -#define MIPS_CONF3_TL (_ULCAST_(1) << 0) -#define MIPS_CONF3_SM (_ULCAST_(1) << 1) -#define MIPS_CONF3_MT (_ULCAST_(1) << 2) -#define MIPS_CONF3_SP (_ULCAST_(1) << 4) -#define MIPS_CONF3_VINT (_ULCAST_(1) << 5) -#define MIPS_CONF3_VEIC (_ULCAST_(1) << 6) -#define MIPS_CONF3_LPA (_ULCAST_(1) << 7) +#define MIPS_CONF3_TL (_ULCAST_(1) << 0) +#define MIPS_CONF3_SM (_ULCAST_(1) << 1) +#define MIPS_CONF3_MT (_ULCAST_(1) << 2) +#define MIPS_CONF3_CDMM (_ULCAST_(1) << 3) +#define MIPS_CONF3_SP (_ULCAST_(1) << 4) +#define MIPS_CONF3_VINT (_ULCAST_(1) << 5) +#define MIPS_CONF3_VEIC (_ULCAST_(1) << 6) +#define MIPS_CONF3_LPA (_ULCAST_(1) << 7) +#define MIPS_CONF3_ITL (_ULCAST_(1) << 8) +#define MIPS_CONF3_CTXTC (_ULCAST_(1) << 9) #define MIPS_CONF3_DSP (_ULCAST_(1) << 10) +#define MIPS_CONF3_DSP2P (_ULCAST_(1) << 11) +#define MIPS_CONF3_RXI (_ULCAST_(1) << 12) #define MIPS_CONF3_ULRI (_ULCAST_(1) << 13) +#define MIPS_CONF3_ISA (_ULCAST_(3) << 14) +#define MIPS_CONF3_ISA_OE (_ULCAST_(1) << 16) +#define MIPS_CONF3_MCU (_ULCAST_(1) << 17) +#define MIPS_CONF3_MMAR (_ULCAST_(7) << 18) +#define MIPS_CONF3_IPLW (_ULCAST_(3) << 21) +#define MIPS_CONF3_VZ (_ULCAST_(1) << 23) +#define MIPS_CONF3_PW (_ULCAST_(1) << 24) +#define MIPS_CONF3_SC (_ULCAST_(1) << 25) +#define MIPS_CONF3_BI (_ULCAST_(1) << 26) +#define MIPS_CONF3_BP (_ULCAST_(1) << 27) +#define MIPS_CONF3_MSA (_ULCAST_(1) << 28) +#define MIPS_CONF3_CMGCR (_ULCAST_(1) << 29) +#define MIPS_CONF3_BPG (_ULCAST_(1) << 30) + +#define MIPS_CONF4_MMUSIZEEXT_SHIFT (0) +#define MIPS_CONF4_MMUSIZEEXT (_ULCAST_(255) << 0) +#define MIPS_CONF4_FTLBSETS_SHIFT (0) +#define MIPS_CONF4_FTLBSETS (_ULCAST_(15) << MIPS_CONF4_FTLBSETS_SHIFT) +#define MIPS_CONF4_FTLBWAYS_SHIFT (4) +#define MIPS_CONF4_FTLBWAYS (_ULCAST_(15) << MIPS_CONF4_FTLBWAYS_SHIFT) +#define MIPS_CONF4_FTLBPAGESIZE_SHIFT (8) +/* bits 10:8 in FTLB-only configurations */ +#define MIPS_CONF4_FTLBPAGESIZE (_ULCAST_(7) << MIPS_CONF4_FTLBPAGESIZE_SHIFT) +/* bits 12:8 in VTLB-FTLB only configurations */ +#define MIPS_CONF4_VFTLBPAGESIZE (_ULCAST_(31) << MIPS_CONF4_FTLBPAGESIZE_SHIFT) +#define MIPS_CONF4_MMUEXTDEF (_ULCAST_(3) << 14) +#define MIPS_CONF4_MMUEXTDEF_MMUSIZEEXT (_ULCAST_(1) << 14) +#define MIPS_CONF4_MMUEXTDEF_FTLBSIZEEXT (_ULCAST_(2) << 14) +#define MIPS_CONF4_MMUEXTDEF_VTLBSIZEEXT (_ULCAST_(3) << 14) +#define MIPS_CONF4_KSCREXIST (_ULCAST_(255) << 16) +#define MIPS_CONF4_VTLBSIZEEXT_SHIFT (24) +#define MIPS_CONF4_VTLBSIZEEXT (_ULCAST_(15) << MIPS_CONF4_VTLBSIZEEXT_SHIFT) +#define MIPS_CONF4_AE (_ULCAST_(1) << 28) +#define MIPS_CONF4_IE (_ULCAST_(3) << 29) +#define MIPS_CONF4_TLBINV (_ULCAST_(2) << 29) + +#define MIPS_CONF5_NF (_ULCAST_(1) << 0) +#define MIPS_CONF5_UFR (_ULCAST_(1) << 2) +#define MIPS_CONF5_MRP (_ULCAST_(1) << 3) +#define MIPS_CONF5_LLB (_ULCAST_(1) << 4) +#define MIPS_CONF5_MVH (_ULCAST_(1) << 5) +#define MIPS_CONF5_FRE (_ULCAST_(1) << 8) +#define MIPS_CONF5_UFE (_ULCAST_(1) << 9) +#define MIPS_CONF5_MSAEN (_ULCAST_(1) << 27) +#define MIPS_CONF5_EVA (_ULCAST_(1) << 28) +#define MIPS_CONF5_CV (_ULCAST_(1) << 29) +#define MIPS_CONF5_K (_ULCAST_(1) << 30) + +#define MIPS_CONF6_SYND (_ULCAST_(1) << 13) +/* proAptiv FTLB on/off bit */ +#define MIPS_CONF6_FTLBEN (_ULCAST_(1) << 15) +/* FTLB probability bits */ +#define MIPS_CONF6_FTLBP_SHIFT (16) #define MIPS_CONF7_WII (_ULCAST_(1) << 31) #define MIPS_CONF7_RPS (_ULCAST_(1) << 2) +#define MIPS_CONF7_IAR (_ULCAST_(1) << 10) +#define MIPS_CONF7_AR (_ULCAST_(1) << 16) +/* FTLB probability bits for R6 */ +#define MIPS_CONF7_FTLBP_SHIFT (18) + +/* MAAR bit definitions */ +#define MIPS_MAAR_ADDR ((BIT_ULL(BITS_PER_LONG - 12) - 1) << 12) +#define MIPS_MAAR_ADDR_SHIFT 12 +#define MIPS_MAAR_S (_ULCAST_(1) << 1) +#define MIPS_MAAR_V (_ULCAST_(1) << 0) + +/* CMGCRBase bit definitions */ +#define MIPS_CMGCRB_BASE 11 +#define MIPS_CMGCRF_BASE (~_ULCAST_((1 << MIPS_CMGCRB_BASE) - 1)) + +/* + * Bits in the MIPS32 Memory Segmentation registers. + */ +#define MIPS_SEGCFG_PA_SHIFT 9 +#define MIPS_SEGCFG_PA (_ULCAST_(127) << MIPS_SEGCFG_PA_SHIFT) +#define MIPS_SEGCFG_AM_SHIFT 4 +#define MIPS_SEGCFG_AM (_ULCAST_(7) << MIPS_SEGCFG_AM_SHIFT) +#define MIPS_SEGCFG_EU_SHIFT 3 +#define MIPS_SEGCFG_EU (_ULCAST_(1) << MIPS_SEGCFG_EU_SHIFT) +#define MIPS_SEGCFG_C_SHIFT 0 +#define MIPS_SEGCFG_C (_ULCAST_(7) << MIPS_SEGCFG_C_SHIFT) + +#define MIPS_SEGCFG_UUSK _ULCAST_(7) +#define MIPS_SEGCFG_USK _ULCAST_(5) +#define MIPS_SEGCFG_MUSUK _ULCAST_(4) +#define MIPS_SEGCFG_MUSK _ULCAST_(3) +#define MIPS_SEGCFG_MSK _ULCAST_(2) +#define MIPS_SEGCFG_MK _ULCAST_(1) +#define MIPS_SEGCFG_UK _ULCAST_(0) + +#define MIPS_PWFIELD_GDI_SHIFT 24 +#define MIPS_PWFIELD_GDI_MASK 0x3f000000 +#define MIPS_PWFIELD_UDI_SHIFT 18 +#define MIPS_PWFIELD_UDI_MASK 0x00fc0000 +#define MIPS_PWFIELD_MDI_SHIFT 12 +#define MIPS_PWFIELD_MDI_MASK 0x0003f000 +#define MIPS_PWFIELD_PTI_SHIFT 6 +#define MIPS_PWFIELD_PTI_MASK 0x00000fc0 +#define MIPS_PWFIELD_PTEI_SHIFT 0 +#define MIPS_PWFIELD_PTEI_MASK 0x0000003f + +#define MIPS_PWSIZE_GDW_SHIFT 24 +#define MIPS_PWSIZE_GDW_MASK 0x3f000000 +#define MIPS_PWSIZE_UDW_SHIFT 18 +#define MIPS_PWSIZE_UDW_MASK 0x00fc0000 +#define MIPS_PWSIZE_MDW_SHIFT 12 +#define MIPS_PWSIZE_MDW_MASK 0x0003f000 +#define MIPS_PWSIZE_PTW_SHIFT 6 +#define MIPS_PWSIZE_PTW_MASK 0x00000fc0 +#define MIPS_PWSIZE_PTEW_SHIFT 0 +#define MIPS_PWSIZE_PTEW_MASK 0x0000003f + +#define MIPS_PWCTL_PWEN_SHIFT 31 +#define MIPS_PWCTL_PWEN_MASK 0x80000000 +#define MIPS_PWCTL_DPH_SHIFT 7 +#define MIPS_PWCTL_DPH_MASK 0x00000080 +#define MIPS_PWCTL_HUGEPG_SHIFT 6 +#define MIPS_PWCTL_HUGEPG_MASK 0x00000060 +#define MIPS_PWCTL_PSN_SHIFT 0 +#define MIPS_PWCTL_PSN_MASK 0x0000003f + +/* CDMMBase register bit definitions */ +#define MIPS_CDMMBASE_SIZE_SHIFT 0 +#define MIPS_CDMMBASE_SIZE (_ULCAST_(511) << MIPS_CDMMBASE_SIZE_SHIFT) +#define MIPS_CDMMBASE_CI (_ULCAST_(1) << 9) +#define MIPS_CDMMBASE_EN (_ULCAST_(1) << 10) +#define MIPS_CDMMBASE_ADDR_SHIFT 11 +#define MIPS_CDMMBASE_ADDR_START 15 + +/* + * Bitfields in the TX39 family CP0 Configuration Register 3 + */ +#define TX39_CONF_ICS_SHIFT 19 +#define TX39_CONF_ICS_MASK 0x00380000 +#define TX39_CONF_ICS_1KB 0x00000000 +#define TX39_CONF_ICS_2KB 0x00080000 +#define TX39_CONF_ICS_4KB 0x00100000 +#define TX39_CONF_ICS_8KB 0x00180000 +#define TX39_CONF_ICS_16KB 0x00200000 + +#define TX39_CONF_DCS_SHIFT 16 +#define TX39_CONF_DCS_MASK 0x00070000 +#define TX39_CONF_DCS_1KB 0x00000000 +#define TX39_CONF_DCS_2KB 0x00010000 +#define TX39_CONF_DCS_4KB 0x00020000 +#define TX39_CONF_DCS_8KB 0x00030000 +#define TX39_CONF_DCS_16KB 0x00040000 + +#define TX39_CONF_CWFON 0x00004000 +#define TX39_CONF_WBON 0x00002000 +#define TX39_CONF_RF_SHIFT 10 +#define TX39_CONF_RF_MASK 0x00000c00 +#define TX39_CONF_DOZE 0x00000200 +#define TX39_CONF_HALT 0x00000100 +#define TX39_CONF_LOCK 0x00000080 +#define TX39_CONF_ICE 0x00000020 +#define TX39_CONF_DCE 0x00000010 +#define TX39_CONF_IRSIZE_SHIFT 2 +#define TX39_CONF_IRSIZE_MASK 0x0000000c +#define TX39_CONF_DRSIZE_SHIFT 0 +#define TX39_CONF_DRSIZE_MASK 0x00000003 + +/* + * Interesting Bits in the R10K CP0 Branch Diagnostic Register + */ +/* Disable Branch Target Address Cache */ +#define R10K_DIAG_D_BTAC (_ULCAST_(1) << 27) +/* Enable Branch Prediction Global History */ +#define R10K_DIAG_E_GHIST (_ULCAST_(1) << 26) +/* Disable Branch Return Cache */ +#define R10K_DIAG_D_BRC (_ULCAST_(1) << 22) + +/* + * Coprocessor 1 (FPU) register names + */ +#define CP1_REVISION $0 +#define CP1_UFR $1 +#define CP1_UNFR $4 +#define CP1_FCCR $25 +#define CP1_FEXR $26 +#define CP1_FENR $28 +#define CP1_STATUS $31 + + /* * Bits in the MIPS32/64 coprocessor 1 (FPU) revision register. */ @@ -541,11 +704,150 @@ #define MIPS_FPIR_W (_ULCAST_(1) << 20) #define MIPS_FPIR_L (_ULCAST_(1) << 21) #define MIPS_FPIR_F64 (_ULCAST_(1) << 22) +#define MIPS_FPIR_HAS2008 (_ULCAST_(1) << 23) +#define MIPS_FPIR_UFRP (_ULCAST_(1) << 28) +#define MIPS_FPIR_FREP (_ULCAST_(1) << 29) + +/* + * Bits in the MIPS32/64 coprocessor 1 (FPU) condition codes register. + */ +#define MIPS_FCCR_CONDX_S 0 +#define MIPS_FCCR_CONDX (_ULCAST_(255) << MIPS_FCCR_CONDX_S) +#define MIPS_FCCR_COND0_S 0 +#define MIPS_FCCR_COND0 (_ULCAST_(1) << MIPS_FCCR_COND0_S) +#define MIPS_FCCR_COND1_S 1 +#define MIPS_FCCR_COND1 (_ULCAST_(1) << MIPS_FCCR_COND1_S) +#define MIPS_FCCR_COND2_S 2 +#define MIPS_FCCR_COND2 (_ULCAST_(1) << MIPS_FCCR_COND2_S) +#define MIPS_FCCR_COND3_S 3 +#define MIPS_FCCR_COND3 (_ULCAST_(1) << MIPS_FCCR_COND3_S) +#define MIPS_FCCR_COND4_S 4 +#define MIPS_FCCR_COND4 (_ULCAST_(1) << MIPS_FCCR_COND4_S) +#define MIPS_FCCR_COND5_S 5 +#define MIPS_FCCR_COND5 (_ULCAST_(1) << MIPS_FCCR_COND5_S) +#define MIPS_FCCR_COND6_S 6 +#define MIPS_FCCR_COND6 (_ULCAST_(1) << MIPS_FCCR_COND6_S) +#define MIPS_FCCR_COND7_S 7 +#define MIPS_FCCR_COND7 (_ULCAST_(1) << MIPS_FCCR_COND7_S) + +/* + * Bits in the MIPS32/64 coprocessor 1 (FPU) enables register. + */ +#define MIPS_FENR_FS_S 2 +#define MIPS_FENR_FS (_ULCAST_(1) << MIPS_FENR_FS_S) + +/* + * FPU Status Register Values + */ +#define FPU_CSR_COND_S 23 /* $fcc0 */ +#define FPU_CSR_COND (_ULCAST_(1) << FPU_CSR_COND_S) + +#define FPU_CSR_FS_S 24 /* flush denormalised results to 0 */ +#define FPU_CSR_FS (_ULCAST_(1) << FPU_CSR_FS_S) + +#define FPU_CSR_CONDX_S 25 /* $fcc[7:1] */ +#define FPU_CSR_CONDX (_ULCAST_(127) << FPU_CSR_CONDX_S) +#define FPU_CSR_COND1_S 25 /* $fcc1 */ +#define FPU_CSR_COND1 (_ULCAST_(1) << FPU_CSR_COND1_S) +#define FPU_CSR_COND2_S 26 /* $fcc2 */ +#define FPU_CSR_COND2 (_ULCAST_(1) << FPU_CSR_COND2_S) +#define FPU_CSR_COND3_S 27 /* $fcc3 */ +#define FPU_CSR_COND3 (_ULCAST_(1) << FPU_CSR_COND3_S) +#define FPU_CSR_COND4_S 28 /* $fcc4 */ +#define FPU_CSR_COND4 (_ULCAST_(1) << FPU_CSR_COND4_S) +#define FPU_CSR_COND5_S 29 /* $fcc5 */ +#define FPU_CSR_COND5 (_ULCAST_(1) << FPU_CSR_COND5_S) +#define FPU_CSR_COND6_S 30 /* $fcc6 */ +#define FPU_CSR_COND6 (_ULCAST_(1) << FPU_CSR_COND6_S) +#define FPU_CSR_COND7_S 31 /* $fcc7 */ +#define FPU_CSR_COND7 (_ULCAST_(1) << FPU_CSR_COND7_S) + +/* + * Bits 22:20 of the FPU Status Register will be read as 0, + * and should be written as zero. + */ +#define FPU_CSR_RSVD (_ULCAST_(7) << 20) + +#define FPU_CSR_ABS2008 (_ULCAST_(1) << 19) +#define FPU_CSR_NAN2008 (_ULCAST_(1) << 18) + +/* + * X the exception cause indicator + * E the exception enable + * S the sticky/flag bit +*/ +#define FPU_CSR_ALL_X 0x0003f000 +#define FPU_CSR_UNI_X 0x00020000 +#define FPU_CSR_INV_X 0x00010000 +#define FPU_CSR_DIV_X 0x00008000 +#define FPU_CSR_OVF_X 0x00004000 +#define FPU_CSR_UDF_X 0x00002000 +#define FPU_CSR_INE_X 0x00001000 + +#define FPU_CSR_ALL_E 0x00000f80 +#define FPU_CSR_INV_E 0x00000800 +#define FPU_CSR_DIV_E 0x00000400 +#define FPU_CSR_OVF_E 0x00000200 +#define FPU_CSR_UDF_E 0x00000100 +#define FPU_CSR_INE_E 0x00000080 + +#define FPU_CSR_ALL_S 0x0000007c +#define FPU_CSR_INV_S 0x00000040 +#define FPU_CSR_DIV_S 0x00000020 +#define FPU_CSR_OVF_S 0x00000010 +#define FPU_CSR_UDF_S 0x00000008 +#define FPU_CSR_INE_S 0x00000004 + +/* Bits 0 and 1 of FPU Status Register specify the rounding mode */ +#define FPU_CSR_RM 0x00000003 +#define FPU_CSR_RN 0x0 /* nearest */ +#define FPU_CSR_RZ 0x1 /* towards zero */ +#define FPU_CSR_RU 0x2 /* towards +Infinity */ +#define FPU_CSR_RD 0x3 /* towards -Infinity */ + #ifndef __ASSEMBLY__ /* - * Functions to access the R10000 performance counters. These are basically + * Macros for handling the ISA mode bit for MIPS16 and microMIPS. + */ +#if defined(CONFIG_SYS_SUPPORTS_MIPS16) || \ + defined(CONFIG_SYS_SUPPORTS_MICROMIPS) +#define get_isa16_mode(x) ((x) & 0x1) +#define msk_isa16_mode(x) ((x) & ~0x1) +#define set_isa16_mode(x) do { (x) |= 0x1; } while (0) +#else +#define get_isa16_mode(x) 0 +#define msk_isa16_mode(x) (x) +#define set_isa16_mode(x) do { } while (0) +#endif + +/* + * microMIPS instructions can be 16-bit or 32-bit in length. This + * returns a 1 if the instruction is 16-bit and a 0 if 32-bit. + */ +static inline int mm_insn_16bit(u16 insn) +{ + u16 opcode = (insn >> 10) & 0x7; + + return (opcode >= 1 && opcode <= 3) ? 1 : 0; +} + +/* + * TLB Invalidate Flush + */ +static inline void tlbinvf(void) +{ + __asm__ __volatile__( + ".set push\n\t" + ".set noreorder\n\t" + ".word 0x42000004\n\t" /* tlbinvf */ + ".set pop"); +} + + +/* + * Functions to access the R10000 performance counters. These are basically * mfc0 and mtc0 instructions from and to coprocessor register with a 5-bit * performance counter number encoded into bits 1 ... 5 of the instruction. * Only performance counters 0 to 1 actually exist, so for a non-R10000 aware @@ -589,6 +891,7 @@ do { \ : "r" (val), "i" (counter)); \ } while (0) + /* * Macros to access the system control coprocessor */ @@ -705,8 +1008,8 @@ do { \ ".set\tmips64\n\t" \ "dmfc0\t%M0, " #source "\n\t" \ "dsll\t%L0, %M0, 32\n\t" \ - "dsrl\t%M0, %M0, 32\n\t" \ - "dsrl\t%L0, %L0, 32\n\t" \ + "dsra\t%M0, %M0, 32\n\t" \ + "dsra\t%L0, %L0, 32\n\t" \ ".set\tmips0" \ : "=r" (__val)); \ else \ @@ -714,8 +1017,8 @@ do { \ ".set\tmips64\n\t" \ "dmfc0\t%M0, " #source ", " #sel "\n\t" \ "dsll\t%L0, %M0, 32\n\t" \ - "dsrl\t%M0, %M0, 32\n\t" \ - "dsrl\t%L0, %L0, 32\n\t" \ + "dsra\t%M0, %M0, 32\n\t" \ + "dsra\t%L0, %L0, 32\n\t" \ ".set\tmips0" \ : "=r" (__val)); \ local_irq_restore(__flags); \ @@ -751,15 +1054,57 @@ do { \ local_irq_restore(__flags); \ } while (0) +#define __readx_32bit_c0_register(source) \ +({ \ + unsigned int __res; \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " .set mips32r2 \n" \ + " .insn \n" \ + " # mfhc0 $1, %1 \n" \ + " .word (0x40410000 | ((%1 & 0x1f) << 11)) \n" \ + " move %0, $1 \n" \ + " .set pop \n" \ + : "=r" (__res) \ + : "i" (source)); \ + __res; \ +}) + +#define __writex_32bit_c0_register(register, value) \ +({ \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " .set mips32r2 \n" \ + " move $1, %0 \n" \ + " # mthc0 $1, %1 \n" \ + " .insn \n" \ + " .word (0x40c10000 | ((%1 & 0x1f) << 11)) \n" \ + " .set pop \n" \ + : \ + : "r" (value), "i" (register)); \ +}) + #define read_c0_index() __read_32bit_c0_register($0, 0) #define write_c0_index(val) __write_32bit_c0_register($0, 0, val) +#define read_c0_random() __read_32bit_c0_register($1, 0) +#define write_c0_random(val) __write_32bit_c0_register($1, 0, val) + #define read_c0_entrylo0() __read_ulong_c0_register($2, 0) #define write_c0_entrylo0(val) __write_ulong_c0_register($2, 0, val) +#define readx_c0_entrylo0() __readx_32bit_c0_register(2) +#define writex_c0_entrylo0(val) __writex_32bit_c0_register(2, val) + #define read_c0_entrylo1() __read_ulong_c0_register($3, 0) #define write_c0_entrylo1(val) __write_ulong_c0_register($3, 0, val) +#define readx_c0_entrylo1() __readx_32bit_c0_register(3) +#define writex_c0_entrylo1(val) __writex_32bit_c0_register(3, val) + #define read_c0_conf() __read_32bit_c0_register($3, 0) #define write_c0_conf(val) __write_32bit_c0_register($3, 0, val) @@ -767,17 +1112,20 @@ do { \ #define write_c0_context(val) __write_ulong_c0_register($4, 0, val) #define read_c0_userlocal() __read_ulong_c0_register($4, 2) -#define write_c0_userlocal(val) __write_ulong_c0_register($4, 2, val) +#define write_c0_userlocal(val) __write_ulong_c0_register($4, 2, val) #define read_c0_pagemask() __read_32bit_c0_register($5, 0) #define write_c0_pagemask(val) __write_32bit_c0_register($5, 0, val) +#define read_c0_pagegrain() __read_32bit_c0_register($5, 1) +#define write_c0_pagegrain(val) __write_32bit_c0_register($5, 1, val) + #define read_c0_wired() __read_32bit_c0_register($6, 0) #define write_c0_wired(val) __write_32bit_c0_register($6, 0, val) #define read_c0_info() __read_32bit_c0_register($7, 0) -#define read_c0_cache() __read_32bit_c0_register($7, 0) /* TX39xx */ +#define read_c0_cache() __read_32bit_c0_register($7, 0) /* TX39xx */ #define write_c0_cache(val) __write_32bit_c0_register($7, 0, val) #define read_c0_badvaddr() __read_ulong_c0_register($8, 0) @@ -805,19 +1153,8 @@ do { \ #define write_c0_compare3(val) __write_32bit_c0_register($11, 7, val) #define read_c0_status() __read_32bit_c0_register($12, 0) -#ifdef CONFIG_MIPS_MT_SMTC -#define write_c0_status(val) \ -do { \ - __write_32bit_c0_register($12, 0, val); \ - __ehb(); \ -} while (0) -#else -/* - * Legacy non-SMTC code, which may be hazardous - * but which might not support EHB - */ + #define write_c0_status(val) __write_32bit_c0_register($12, 0, val) -#endif /* CONFIG_MIPS_MT_SMTC */ #define read_c0_cause() __read_32bit_c0_register($13, 0) #define write_c0_cause(val) __write_32bit_c0_register($13, 0, val) @@ -827,6 +1164,8 @@ do { \ #define read_c0_prid() __read_32bit_c0_register($15, 0) +#define read_c0_cmgcrbase() __read_ulong_c0_register($15, 3) + #define read_c0_config() __read_32bit_c0_register($16, 0) #define read_c0_config1() __read_32bit_c0_register($16, 1) #define read_c0_config2() __read_32bit_c0_register($16, 2) @@ -844,8 +1183,15 @@ do { \ #define write_c0_config6(val) __write_32bit_c0_register($16, 6, val) #define write_c0_config7(val) __write_32bit_c0_register($16, 7, val) +#define read_c0_lladdr() __read_ulong_c0_register($17, 0) +#define write_c0_lladdr(val) __write_ulong_c0_register($17, 0, val) +#define read_c0_maar() __read_ulong_c0_register($17, 1) +#define write_c0_maar(val) __write_ulong_c0_register($17, 1, val) +#define read_c0_maari() __read_32bit_c0_register($17, 2) +#define write_c0_maari(val) __write_32bit_c0_register($17, 2, val) + /* - * The WatchLo register. There may be upto 8 of them. + * The WatchLo register. There may be up to 8 of them. */ #define read_c0_watchlo0() __read_ulong_c0_register($18, 0) #define read_c0_watchlo1() __read_ulong_c0_register($18, 1) @@ -865,7 +1211,7 @@ do { \ #define write_c0_watchlo7(val) __write_ulong_c0_register($18, 7, val) /* - * The WatchHi register. There may be upto 8 of them. + * The WatchHi register. There may be up to 8 of them. */ #define read_c0_watchhi0() __read_32bit_c0_register($19, 0) #define read_c0_watchhi1() __read_32bit_c0_register($19, 1) @@ -892,15 +1238,15 @@ do { \ #define write_c0_intcontrol(val) __write_32bit_c0_ctrl_register($20, val) #define read_c0_framemask() __read_32bit_c0_register($21, 0) -#define write_c0_framemask(val) __write_32bit_c0_register($21, 0, val) - -/* RM9000 PerfControl performance counter control register */ -#define read_c0_perfcontrol() __read_32bit_c0_register($22, 0) -#define write_c0_perfcontrol(val) __write_32bit_c0_register($22, 0, val) +#define write_c0_framemask(val) __write_32bit_c0_register($21, 0, val) #define read_c0_diag() __read_32bit_c0_register($22, 0) #define write_c0_diag(val) __write_32bit_c0_register($22, 0, val) +/* R10K CP0 Branch Diagnostic register is 64bits wide */ +#define read_c0_r10k_diag() __read_64bit_c0_register($22, 0) +#define write_c0_r10k_diag(val) __write_64bit_c0_register($22, 0, val) + #define read_c0_diag1() __read_32bit_c0_register($22, 1) #define write_c0_diag1(val) __write_32bit_c0_register($22, 1, val) @@ -926,36 +1272,40 @@ do { \ * MIPS32 / MIPS64 performance counters */ #define read_c0_perfctrl0() __read_32bit_c0_register($25, 0) -#define write_c0_perfctrl0(val) __write_32bit_c0_register($25, 0, val) +#define write_c0_perfctrl0(val) __write_32bit_c0_register($25, 0, val) #define read_c0_perfcntr0() __read_32bit_c0_register($25, 1) -#define write_c0_perfcntr0(val) __write_32bit_c0_register($25, 1, val) +#define write_c0_perfcntr0(val) __write_32bit_c0_register($25, 1, val) +#define read_c0_perfcntr0_64() __read_64bit_c0_register($25, 1) +#define write_c0_perfcntr0_64(val) __write_64bit_c0_register($25, 1, val) #define read_c0_perfctrl1() __read_32bit_c0_register($25, 2) -#define write_c0_perfctrl1(val) __write_32bit_c0_register($25, 2, val) +#define write_c0_perfctrl1(val) __write_32bit_c0_register($25, 2, val) #define read_c0_perfcntr1() __read_32bit_c0_register($25, 3) -#define write_c0_perfcntr1(val) __write_32bit_c0_register($25, 3, val) +#define write_c0_perfcntr1(val) __write_32bit_c0_register($25, 3, val) +#define read_c0_perfcntr1_64() __read_64bit_c0_register($25, 3) +#define write_c0_perfcntr1_64(val) __write_64bit_c0_register($25, 3, val) #define read_c0_perfctrl2() __read_32bit_c0_register($25, 4) -#define write_c0_perfctrl2(val) __write_32bit_c0_register($25, 4, val) +#define write_c0_perfctrl2(val) __write_32bit_c0_register($25, 4, val) #define read_c0_perfcntr2() __read_32bit_c0_register($25, 5) -#define write_c0_perfcntr2(val) __write_32bit_c0_register($25, 5, val) +#define write_c0_perfcntr2(val) __write_32bit_c0_register($25, 5, val) +#define read_c0_perfcntr2_64() __read_64bit_c0_register($25, 5) +#define write_c0_perfcntr2_64(val) __write_64bit_c0_register($25, 5, val) #define read_c0_perfctrl3() __read_32bit_c0_register($25, 6) -#define write_c0_perfctrl3(val) __write_32bit_c0_register($25, 6, val) +#define write_c0_perfctrl3(val) __write_32bit_c0_register($25, 6, val) #define read_c0_perfcntr3() __read_32bit_c0_register($25, 7) -#define write_c0_perfcntr3(val) __write_32bit_c0_register($25, 7, val) - -/* RM9000 PerfCount performance counter register */ -#define read_c0_perfcount() __read_64bit_c0_register($25, 0) -#define write_c0_perfcount(val) __write_64bit_c0_register($25, 0, val) +#define write_c0_perfcntr3(val) __write_32bit_c0_register($25, 7, val) +#define read_c0_perfcntr3_64() __read_64bit_c0_register($25, 7) +#define write_c0_perfcntr3_64(val) __write_64bit_c0_register($25, 7, val) #define read_c0_ecc() __read_32bit_c0_register($26, 0) #define write_c0_ecc(val) __write_32bit_c0_register($26, 0, val) #define read_c0_derraddr0() __read_ulong_c0_register($26, 1) -#define write_c0_derraddr0(val) __write_ulong_c0_register($26, 1, val) +#define write_c0_derraddr0(val) __write_ulong_c0_register($26, 1, val) #define read_c0_cacheerr() __read_32bit_c0_register($27, 0) #define read_c0_derraddr1() __read_ulong_c0_register($27, 1) -#define write_c0_derraddr1(val) __write_ulong_c0_register($27, 1, val) +#define write_c0_derraddr1(val) __write_ulong_c0_register($27, 1, val) #define read_c0_taglo() __read_32bit_c0_register($28, 0) #define write_c0_taglo(val) __write_32bit_c0_register($28, 0, val) @@ -963,6 +1313,12 @@ do { \ #define read_c0_dtaglo() __read_32bit_c0_register($28, 2) #define write_c0_dtaglo(val) __write_32bit_c0_register($28, 2, val) +#define read_c0_ddatalo() __read_32bit_c0_register($28, 3) +#define write_c0_ddatalo(val) __write_32bit_c0_register($28, 3, val) + +#define read_c0_staglo() __read_32bit_c0_register($28, 4) +#define write_c0_staglo(val) __write_32bit_c0_register($28, 4, val) + #define read_c0_taghi() __read_32bit_c0_register($29, 0) #define write_c0_taghi(val) __write_32bit_c0_register($29, 0, val) @@ -985,271 +1341,524 @@ do { \ #define read_c0_ebase() __read_32bit_c0_register($15, 1) #define write_c0_ebase(val) __write_32bit_c0_register($15, 1, val) +#define read_c0_cdmmbase() __read_ulong_c0_register($15, 2) +#define write_c0_cdmmbase(val) __write_ulong_c0_register($15, 2, val) + +/* MIPSR3 */ +#define read_c0_segctl0() __read_32bit_c0_register($5, 2) +#define write_c0_segctl0(val) __write_32bit_c0_register($5, 2, val) + +#define read_c0_segctl1() __read_32bit_c0_register($5, 3) +#define write_c0_segctl1(val) __write_32bit_c0_register($5, 3, val) + +#define read_c0_segctl2() __read_32bit_c0_register($5, 4) +#define write_c0_segctl2(val) __write_32bit_c0_register($5, 4, val) + +/* Hardware Page Table Walker */ +#define read_c0_pwbase() __read_ulong_c0_register($5, 5) +#define write_c0_pwbase(val) __write_ulong_c0_register($5, 5, val) + +#define read_c0_pwfield() __read_ulong_c0_register($5, 6) +#define write_c0_pwfield(val) __write_ulong_c0_register($5, 6, val) + +#define read_c0_pwsize() __read_ulong_c0_register($5, 7) +#define write_c0_pwsize(val) __write_ulong_c0_register($5, 7, val) + +#define read_c0_pwctl() __read_32bit_c0_register($6, 6) +#define write_c0_pwctl(val) __write_32bit_c0_register($6, 6, val) + +/* Cavium OCTEON (cnMIPS) */ +#define read_c0_cvmcount() __read_ulong_c0_register($9, 6) +#define write_c0_cvmcount(val) __write_ulong_c0_register($9, 6, val) + +#define read_c0_cvmctl() __read_64bit_c0_register($9, 7) +#define write_c0_cvmctl(val) __write_64bit_c0_register($9, 7, val) + +#define read_c0_cvmmemctl() __read_64bit_c0_register($11, 7) +#define write_c0_cvmmemctl(val) __write_64bit_c0_register($11, 7, val) /* - * Macros to access the floating point coprocessor control registers + * The cacheerr registers are not standardized. On OCTEON, they are + * 64 bits wide. */ -#define read_32bit_cp1_register(source) \ -({ int __res; \ - __asm__ __volatile__( \ - ".set\tpush\n\t" \ - ".set\treorder\n\t" \ - "cfc1\t%0,"STR(source)"\n\t" \ - ".set\tpop" \ - : "=r" (__res)); \ - __res;}) +#define read_octeon_c0_icacheerr() __read_64bit_c0_register($27, 0) +#define write_octeon_c0_icacheerr(val) __write_64bit_c0_register($27, 0, val) -#define rddsp(mask) \ +#define read_octeon_c0_dcacheerr() __read_64bit_c0_register($27, 1) +#define write_octeon_c0_dcacheerr(val) __write_64bit_c0_register($27, 1, val) + +/* BMIPS3300 */ +#define read_c0_brcm_config_0() __read_32bit_c0_register($22, 0) +#define write_c0_brcm_config_0(val) __write_32bit_c0_register($22, 0, val) + +#define read_c0_brcm_bus_pll() __read_32bit_c0_register($22, 4) +#define write_c0_brcm_bus_pll(val) __write_32bit_c0_register($22, 4, val) + +#define read_c0_brcm_reset() __read_32bit_c0_register($22, 5) +#define write_c0_brcm_reset(val) __write_32bit_c0_register($22, 5, val) + +/* BMIPS43xx */ +#define read_c0_brcm_cmt_intr() __read_32bit_c0_register($22, 1) +#define write_c0_brcm_cmt_intr(val) __write_32bit_c0_register($22, 1, val) + +#define read_c0_brcm_cmt_ctrl() __read_32bit_c0_register($22, 2) +#define write_c0_brcm_cmt_ctrl(val) __write_32bit_c0_register($22, 2, val) + +#define read_c0_brcm_cmt_local() __read_32bit_c0_register($22, 3) +#define write_c0_brcm_cmt_local(val) __write_32bit_c0_register($22, 3, val) + +#define read_c0_brcm_config_1() __read_32bit_c0_register($22, 5) +#define write_c0_brcm_config_1(val) __write_32bit_c0_register($22, 5, val) + +#define read_c0_brcm_cbr() __read_32bit_c0_register($22, 6) +#define write_c0_brcm_cbr(val) __write_32bit_c0_register($22, 6, val) + +/* BMIPS5000 */ +#define read_c0_brcm_config() __read_32bit_c0_register($22, 0) +#define write_c0_brcm_config(val) __write_32bit_c0_register($22, 0, val) + +#define read_c0_brcm_mode() __read_32bit_c0_register($22, 1) +#define write_c0_brcm_mode(val) __write_32bit_c0_register($22, 1, val) + +#define read_c0_brcm_action() __read_32bit_c0_register($22, 2) +#define write_c0_brcm_action(val) __write_32bit_c0_register($22, 2, val) + +#define read_c0_brcm_edsp() __read_32bit_c0_register($22, 3) +#define write_c0_brcm_edsp(val) __write_32bit_c0_register($22, 3, val) + +#define read_c0_brcm_bootvec() __read_32bit_c0_register($22, 4) +#define write_c0_brcm_bootvec(val) __write_32bit_c0_register($22, 4, val) + +#define read_c0_brcm_sleepcount() __read_32bit_c0_register($22, 7) +#define write_c0_brcm_sleepcount(val) __write_32bit_c0_register($22, 7, val) + +/* + * Macros to access the floating point coprocessor control registers + */ +#define _read_32bit_cp1_register(source, gas_hardfloat) \ ({ \ unsigned int __res; \ \ __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " # rddsp $1, %x1 \n" \ - " .word 0x7c000cb8 | (%x1 << 16) \n" \ - " move %0, $1 \n" \ - " .set pop \n" \ - : "=r" (__res) \ - : "i" (mask)); \ + " .set push \n" \ + " .set reorder \n" \ + " # gas fails to assemble cfc1 for some archs, \n" \ + " # like Octeon. \n" \ + " .set mips1 \n" \ + " "STR(gas_hardfloat)" \n" \ + " cfc1 %0,"STR(source)" \n" \ + " .set pop \n" \ + : "=r" (__res)); \ __res; \ }) -#define wrdsp(val, mask) \ -do { \ +#define _write_32bit_cp1_register(dest, val, gas_hardfloat) \ +({ \ __asm__ __volatile__( \ " .set push \n" \ - " .set noat \n" \ - " move $1, %0 \n" \ - " # wrdsp $1, %x1 \n" \ - " .word 0x7c2004f8 | (%x1 << 11) \n" \ + " .set reorder \n" \ + " "STR(gas_hardfloat)" \n" \ + " ctc1 %0,"STR(dest)" \n" \ " .set pop \n" \ + : : "r" (val)); \ +}) + +#ifdef GAS_HAS_SET_HARDFLOAT +#define read_32bit_cp1_register(source) \ + _read_32bit_cp1_register(source, .set hardfloat) +#define write_32bit_cp1_register(dest, val) \ + _write_32bit_cp1_register(dest, val, .set hardfloat) +#else +#define read_32bit_cp1_register(source) \ + _read_32bit_cp1_register(source, ) +#define write_32bit_cp1_register(dest, val) \ + _write_32bit_cp1_register(dest, val, ) +#endif + +#ifdef HAVE_AS_DSP +#define rddsp(mask) \ +({ \ + unsigned int __dspctl; \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set dsp \n" \ + " rddsp %0, %x1 \n" \ + " .set pop \n" \ + : "=r" (__dspctl) \ + : "i" (mask)); \ + __dspctl; \ +}) + +#define wrdsp(val, mask) \ +({ \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set dsp \n" \ + " wrdsp %0, %x1 \n" \ + " .set pop \n" \ : \ : "r" (val), "i" (mask)); \ -} while (0) +}) + +#define mflo0() \ +({ \ + long mflo0; \ + __asm__( \ + " .set push \n" \ + " .set dsp \n" \ + " mflo %0, $ac0 \n" \ + " .set pop \n" \ + : "=r" (mflo0)); \ + mflo0; \ +}) + +#define mflo1() \ +({ \ + long mflo1; \ + __asm__( \ + " .set push \n" \ + " .set dsp \n" \ + " mflo %0, $ac1 \n" \ + " .set pop \n" \ + : "=r" (mflo1)); \ + mflo1; \ +}) + +#define mflo2() \ +({ \ + long mflo2; \ + __asm__( \ + " .set push \n" \ + " .set dsp \n" \ + " mflo %0, $ac2 \n" \ + " .set pop \n" \ + : "=r" (mflo2)); \ + mflo2; \ +}) + +#define mflo3() \ +({ \ + long mflo3; \ + __asm__( \ + " .set push \n" \ + " .set dsp \n" \ + " mflo %0, $ac3 \n" \ + " .set pop \n" \ + : "=r" (mflo3)); \ + mflo3; \ +}) #define mfhi0() \ ({ \ - unsigned long __treg; \ - \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " # mfhi %0, $ac0 \n" \ - " .word 0x00000810 \n" \ - " move %0, $1 \n" \ - " .set pop \n" \ - : "=r" (__treg)); \ - __treg; \ + long mfhi0; \ + __asm__( \ + " .set push \n" \ + " .set dsp \n" \ + " mfhi %0, $ac0 \n" \ + " .set pop \n" \ + : "=r" (mfhi0)); \ + mfhi0; \ }) #define mfhi1() \ ({ \ - unsigned long __treg; \ - \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " # mfhi %0, $ac1 \n" \ - " .word 0x00200810 \n" \ - " move %0, $1 \n" \ - " .set pop \n" \ - : "=r" (__treg)); \ - __treg; \ + long mfhi1; \ + __asm__( \ + " .set push \n" \ + " .set dsp \n" \ + " mfhi %0, $ac1 \n" \ + " .set pop \n" \ + : "=r" (mfhi1)); \ + mfhi1; \ }) #define mfhi2() \ ({ \ - unsigned long __treg; \ - \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " # mfhi %0, $ac2 \n" \ - " .word 0x00400810 \n" \ - " move %0, $1 \n" \ - " .set pop \n" \ - : "=r" (__treg)); \ - __treg; \ + long mfhi2; \ + __asm__( \ + " .set push \n" \ + " .set dsp \n" \ + " mfhi %0, $ac2 \n" \ + " .set pop \n" \ + : "=r" (mfhi2)); \ + mfhi2; \ }) #define mfhi3() \ ({ \ - unsigned long __treg; \ - \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " # mfhi %0, $ac3 \n" \ - " .word 0x00600810 \n" \ - " move %0, $1 \n" \ - " .set pop \n" \ - : "=r" (__treg)); \ - __treg; \ + long mfhi3; \ + __asm__( \ + " .set push \n" \ + " .set dsp \n" \ + " mfhi %0, $ac3 \n" \ + " .set pop \n" \ + : "=r" (mfhi3)); \ + mfhi3; \ }) -#define mflo0() \ + +#define mtlo0(x) \ ({ \ - unsigned long __treg; \ - \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " # mflo %0, $ac0 \n" \ - " .word 0x00000812 \n" \ - " move %0, $1 \n" \ - " .set pop \n" \ - : "=r" (__treg)); \ - __treg; \ + __asm__( \ + " .set push \n" \ + " .set dsp \n" \ + " mtlo %0, $ac0 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ }) -#define mflo1() \ +#define mtlo1(x) \ ({ \ - unsigned long __treg; \ - \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " # mflo %0, $ac1 \n" \ - " .word 0x00200812 \n" \ - " move %0, $1 \n" \ - " .set pop \n" \ - : "=r" (__treg)); \ - __treg; \ + __asm__( \ + " .set push \n" \ + " .set dsp \n" \ + " mtlo %0, $ac1 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ }) -#define mflo2() \ +#define mtlo2(x) \ ({ \ - unsigned long __treg; \ - \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " # mflo %0, $ac2 \n" \ - " .word 0x00400812 \n" \ - " move %0, $1 \n" \ - " .set pop \n" \ - : "=r" (__treg)); \ - __treg; \ + __asm__( \ + " .set push \n" \ + " .set dsp \n" \ + " mtlo %0, $ac2 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ }) -#define mflo3() \ +#define mtlo3(x) \ ({ \ - unsigned long __treg; \ - \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " # mflo %0, $ac3 \n" \ - " .word 0x00600812 \n" \ - " move %0, $1 \n" \ - " .set pop \n" \ - : "=r" (__treg)); \ - __treg; \ + __asm__( \ + " .set push \n" \ + " .set dsp \n" \ + " mtlo %0, $ac3 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ }) #define mthi0(x) \ -do { \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noat \n" \ - " move $1, %0 \n" \ - " # mthi $1, $ac0 \n" \ - " .word 0x00200011 \n" \ - " .set pop \n" \ +({ \ + __asm__( \ + " .set push \n" \ + " .set dsp \n" \ + " mthi %0, $ac0 \n" \ + " .set pop \n" \ : \ : "r" (x)); \ -} while (0) +}) #define mthi1(x) \ -do { \ +({ \ + __asm__( \ + " .set push \n" \ + " .set dsp \n" \ + " mthi %0, $ac1 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +}) + +#define mthi2(x) \ +({ \ + __asm__( \ + " .set push \n" \ + " .set dsp \n" \ + " mthi %0, $ac2 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +}) + +#define mthi3(x) \ +({ \ + __asm__( \ + " .set push \n" \ + " .set dsp \n" \ + " mthi %0, $ac3 \n" \ + " .set pop \n" \ + : \ + : "r" (x)); \ +}) + +#else + +#ifdef CONFIG_CPU_MICROMIPS +#define rddsp(mask) \ +({ \ + unsigned int __res; \ + \ __asm__ __volatile__( \ " .set push \n" \ " .set noat \n" \ - " move $1, %0 \n" \ - " # mthi $1, $ac1 \n" \ - " .word 0x00200811 \n" \ + " # rddsp $1, %x1 \n" \ + " .hword ((0x0020067c | (%x1 << 14)) >> 16) \n" \ + " .hword ((0x0020067c | (%x1 << 14)) & 0xffff) \n" \ + " move %0, $1 \n" \ " .set pop \n" \ - : \ - : "r" (x)); \ -} while (0) + : "=r" (__res) \ + : "i" (mask)); \ + __res; \ +}) -#define mthi2(x) \ -do { \ +#define wrdsp(val, mask) \ +({ \ __asm__ __volatile__( \ " .set push \n" \ " .set noat \n" \ " move $1, %0 \n" \ - " # mthi $1, $ac2 \n" \ - " .word 0x00201011 \n" \ + " # wrdsp $1, %x1 \n" \ + " .hword ((0x0020167c | (%x1 << 14)) >> 16) \n" \ + " .hword ((0x0020167c | (%x1 << 14)) & 0xffff) \n" \ " .set pop \n" \ : \ - : "r" (x)); \ -} while (0) + : "r" (val), "i" (mask)); \ +}) -#define mthi3(x) \ -do { \ +#define _umips_dsp_mfxxx(ins) \ +({ \ + unsigned long __treg; \ + \ __asm__ __volatile__( \ " .set push \n" \ " .set noat \n" \ - " move $1, %0 \n" \ - " # mthi $1, $ac3 \n" \ - " .word 0x00201811 \n" \ + " .hword 0x0001 \n" \ + " .hword %x1 \n" \ + " move %0, $1 \n" \ " .set pop \n" \ - : \ - : "r" (x)); \ -} while (0) + : "=r" (__treg) \ + : "i" (ins)); \ + __treg; \ +}) -#define mtlo0(x) \ -do { \ +#define _umips_dsp_mtxxx(val, ins) \ +({ \ __asm__ __volatile__( \ " .set push \n" \ " .set noat \n" \ " move $1, %0 \n" \ - " # mtlo $1, $ac0 \n" \ - " .word 0x00200013 \n" \ + " .hword 0x0001 \n" \ + " .hword %x1 \n" \ " .set pop \n" \ : \ - : "r" (x)); \ -} while (0) + : "r" (val), "i" (ins)); \ +}) -#define mtlo1(x) \ -do { \ +#define _umips_dsp_mflo(reg) _umips_dsp_mfxxx((reg << 14) | 0x107c) +#define _umips_dsp_mfhi(reg) _umips_dsp_mfxxx((reg << 14) | 0x007c) + +#define _umips_dsp_mtlo(val, reg) _umips_dsp_mtxxx(val, ((reg << 14) | 0x307c)) +#define _umips_dsp_mthi(val, reg) _umips_dsp_mtxxx(val, ((reg << 14) | 0x207c)) + +#define mflo0() _umips_dsp_mflo(0) +#define mflo1() _umips_dsp_mflo(1) +#define mflo2() _umips_dsp_mflo(2) +#define mflo3() _umips_dsp_mflo(3) + +#define mfhi0() _umips_dsp_mfhi(0) +#define mfhi1() _umips_dsp_mfhi(1) +#define mfhi2() _umips_dsp_mfhi(2) +#define mfhi3() _umips_dsp_mfhi(3) + +#define mtlo0(x) _umips_dsp_mtlo(x, 0) +#define mtlo1(x) _umips_dsp_mtlo(x, 1) +#define mtlo2(x) _umips_dsp_mtlo(x, 2) +#define mtlo3(x) _umips_dsp_mtlo(x, 3) + +#define mthi0(x) _umips_dsp_mthi(x, 0) +#define mthi1(x) _umips_dsp_mthi(x, 1) +#define mthi2(x) _umips_dsp_mthi(x, 2) +#define mthi3(x) _umips_dsp_mthi(x, 3) + +#else /* !CONFIG_CPU_MICROMIPS */ +#define rddsp(mask) \ +({ \ + unsigned int __res; \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set noat \n" \ + " # rddsp $1, %x1 \n" \ + " .word 0x7c000cb8 | (%x1 << 16) \n" \ + " move %0, $1 \n" \ + " .set pop \n" \ + : "=r" (__res) \ + : "i" (mask)); \ + __res; \ +}) + +#define wrdsp(val, mask) \ +({ \ __asm__ __volatile__( \ " .set push \n" \ " .set noat \n" \ " move $1, %0 \n" \ - " # mtlo $1, $ac1 \n" \ - " .word 0x00200813 \n" \ + " # wrdsp $1, %x1 \n" \ + " .word 0x7c2004f8 | (%x1 << 11) \n" \ " .set pop \n" \ : \ - : "r" (x)); \ -} while (0) + : "r" (val), "i" (mask)); \ +}) -#define mtlo2(x) \ -do { \ +#define _dsp_mfxxx(ins) \ +({ \ + unsigned long __treg; \ + \ __asm__ __volatile__( \ " .set push \n" \ " .set noat \n" \ - " move $1, %0 \n" \ - " # mtlo $1, $ac2 \n" \ - " .word 0x00201013 \n" \ + " .word (0x00000810 | %1) \n" \ + " move %0, $1 \n" \ " .set pop \n" \ - : \ - : "r" (x)); \ -} while (0) + : "=r" (__treg) \ + : "i" (ins)); \ + __treg; \ +}) -#define mtlo3(x) \ -do { \ +#define _dsp_mtxxx(val, ins) \ +({ \ __asm__ __volatile__( \ " .set push \n" \ " .set noat \n" \ " move $1, %0 \n" \ - " # mtlo $1, $ac3 \n" \ - " .word 0x00201813 \n" \ + " .word (0x00200011 | %1) \n" \ " .set pop \n" \ : \ - : "r" (x)); \ -} while (0) + : "r" (val), "i" (ins)); \ +}) + +#define _dsp_mflo(reg) _dsp_mfxxx((reg << 21) | 0x0002) +#define _dsp_mfhi(reg) _dsp_mfxxx((reg << 21) | 0x0000) + +#define _dsp_mtlo(val, reg) _dsp_mtxxx(val, ((reg << 11) | 0x0002)) +#define _dsp_mthi(val, reg) _dsp_mtxxx(val, ((reg << 11) | 0x0000)) + +#define mflo0() _dsp_mflo(0) +#define mflo1() _dsp_mflo(1) +#define mflo2() _dsp_mflo(2) +#define mflo3() _dsp_mflo(3) + +#define mfhi0() _dsp_mfhi(0) +#define mfhi1() _dsp_mfhi(1) +#define mfhi2() _dsp_mfhi(2) +#define mfhi3() _dsp_mfhi(3) + +#define mtlo0(x) _dsp_mtlo(x, 0) +#define mtlo1(x) _dsp_mtlo(x, 1) +#define mtlo2(x) _dsp_mtlo(x, 2) +#define mtlo3(x) _dsp_mtlo(x, 3) + +#define mthi0(x) _dsp_mthi(x, 0) +#define mthi1(x) _dsp_mthi(x, 1) +#define mthi2(x) _dsp_mthi(x, 2) +#define mthi3(x) _dsp_mthi(x, 3) + +#endif /* CONFIG_CPU_MICROMIPS */ +#endif /* * TLB operations. @@ -1324,11 +1933,11 @@ static inline void tlb_write_random(void) static inline unsigned int \ set_c0_##name(unsigned int set) \ { \ - unsigned int res; \ + unsigned int res, new; \ \ res = read_c0_##name(); \ - res |= set; \ - write_c0_##name(res); \ + new = res | set; \ + write_c0_##name(new); \ \ return res; \ } \ @@ -1336,24 +1945,24 @@ set_c0_##name(unsigned int set) \ static inline unsigned int \ clear_c0_##name(unsigned int clear) \ { \ - unsigned int res; \ + unsigned int res, new; \ \ res = read_c0_##name(); \ - res &= ~clear; \ - write_c0_##name(res); \ + new = res & ~clear; \ + write_c0_##name(new); \ \ return res; \ } \ \ static inline unsigned int \ -change_c0_##name(unsigned int change, unsigned int new) \ +change_c0_##name(unsigned int change, unsigned int val) \ { \ - unsigned int res; \ + unsigned int res, new; \ \ res = read_c0_##name(); \ - res &= ~change; \ - res |= (new & change); \ - write_c0_##name(res); \ + new = res & ~change; \ + new |= (val & change); \ + write_c0_##name(new); \ \ return res; \ } @@ -1361,9 +1970,27 @@ change_c0_##name(unsigned int change, unsigned int new) \ __BUILD_SET_C0(status) __BUILD_SET_C0(cause) __BUILD_SET_C0(config) +__BUILD_SET_C0(config5) __BUILD_SET_C0(intcontrol) __BUILD_SET_C0(intctl) __BUILD_SET_C0(srsmap) +__BUILD_SET_C0(pagegrain) +__BUILD_SET_C0(brcm_config_0) +__BUILD_SET_C0(brcm_bus_pll) +__BUILD_SET_C0(brcm_reset) +__BUILD_SET_C0(brcm_cmt_intr) +__BUILD_SET_C0(brcm_cmt_ctrl) +__BUILD_SET_C0(brcm_config) +__BUILD_SET_C0(brcm_mode) + +/* + * Return low 10 bits of ebase. + * Note that under KVM (MIPSVZ) this returns vcpu id. + */ +static inline unsigned int get_ebase_cpunum(void) +{ + return read_c0_ebase() & 0x3ff; +} #endif /* !__ASSEMBLY__ */ diff --git a/arch/mips/include/asm/pgtable-bits.h b/arch/mips/include/asm/pgtable-bits.h new file mode 100644 index 00000000000..9e5fa98d1c8 --- /dev/null +++ b/arch/mips/include/asm/pgtable-bits.h @@ -0,0 +1,283 @@ +/* + * Copyright (C) 1994 - 2002 by Ralf Baechle + * Copyright (C) 1999, 2000, 2001 Silicon Graphics, Inc. + * Copyright (C) 2002 Maciej W. Rozycki + * + * SPDX-License-Identifier: GPL-2.0 + */ +#ifndef _ASM_PGTABLE_BITS_H +#define _ASM_PGTABLE_BITS_H + + +/* + * Note that we shift the lower 32bits of each EntryLo[01] entry + * 6 bits to the left. That way we can convert the PFN into the + * physical address by a single 'and' operation and gain 6 additional + * bits for storing information which isn't present in a normal + * MIPS page table. + * + * Similar to the Alpha port, we need to keep track of the ref + * and mod bits in software. We have a software "yeah you can read + * from this page" bit, and a hardware one which actually lets the + * process read from the page. On the same token we have a software + * writable bit and the real hardware one which actually lets the + * process write to the page, this keeps a mod bit via the hardware + * dirty bit. + * + * Certain revisions of the R4000 and R5000 have a bug where if a + * certain sequence occurs in the last 3 instructions of an executable + * page, and the following page is not mapped, the cpu can do + * unpredictable things. The code (when it is written) to deal with + * this problem will be in the update_mmu_cache() code for the r4k. + */ +#if defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_CPU_MIPS32) + +/* + * The following bits are implemented by the TLB hardware + */ +#define _PAGE_NO_EXEC_SHIFT 0 +#define _PAGE_NO_EXEC (1 << _PAGE_NO_EXEC_SHIFT) +#define _PAGE_NO_READ_SHIFT (_PAGE_NO_EXEC_SHIFT + 1) +#define _PAGE_NO_READ (1 << _PAGE_NO_READ_SHIFT) +#define _PAGE_GLOBAL_SHIFT (_PAGE_NO_READ_SHIFT + 1) +#define _PAGE_GLOBAL (1 << _PAGE_GLOBAL_SHIFT) +#define _PAGE_VALID_SHIFT (_PAGE_GLOBAL_SHIFT + 1) +#define _PAGE_VALID (1 << _PAGE_VALID_SHIFT) +#define _PAGE_DIRTY_SHIFT (_PAGE_VALID_SHIFT + 1) +#define _PAGE_DIRTY (1 << _PAGE_DIRTY_SHIFT) +#define _CACHE_SHIFT (_PAGE_DIRTY_SHIFT + 1) +#define _CACHE_MASK (7 << _CACHE_SHIFT) + +/* + * The following bits are implemented in software + */ +#define _PAGE_PRESENT_SHIFT (24) +#define _PAGE_PRESENT (1 << _PAGE_PRESENT_SHIFT) +#define _PAGE_READ_SHIFT (_PAGE_PRESENT_SHIFT + 1) +#define _PAGE_READ (1 << _PAGE_READ_SHIFT) +#define _PAGE_WRITE_SHIFT (_PAGE_READ_SHIFT + 1) +#define _PAGE_WRITE (1 << _PAGE_WRITE_SHIFT) +#define _PAGE_ACCESSED_SHIFT (_PAGE_WRITE_SHIFT + 1) +#define _PAGE_ACCESSED (1 << _PAGE_ACCESSED_SHIFT) +#define _PAGE_MODIFIED_SHIFT (_PAGE_ACCESSED_SHIFT + 1) +#define _PAGE_MODIFIED (1 << _PAGE_MODIFIED_SHIFT) + +#define _PFN_SHIFT (PAGE_SHIFT - 12 + _CACHE_SHIFT + 3) + +/* + * Bits for extended EntryLo0/EntryLo1 registers + */ +#define _PFNX_MASK 0xffffff + +#elif defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) + +/* + * The following bits are implemented in software + */ +#define _PAGE_PRESENT_SHIFT (0) +#define _PAGE_PRESENT (1 << _PAGE_PRESENT_SHIFT) +#define _PAGE_READ_SHIFT (_PAGE_PRESENT_SHIFT + 1) +#define _PAGE_READ (1 << _PAGE_READ_SHIFT) +#define _PAGE_WRITE_SHIFT (_PAGE_READ_SHIFT + 1) +#define _PAGE_WRITE (1 << _PAGE_WRITE_SHIFT) +#define _PAGE_ACCESSED_SHIFT (_PAGE_WRITE_SHIFT + 1) +#define _PAGE_ACCESSED (1 << _PAGE_ACCESSED_SHIFT) +#define _PAGE_MODIFIED_SHIFT (_PAGE_ACCESSED_SHIFT + 1) +#define _PAGE_MODIFIED (1 << _PAGE_MODIFIED_SHIFT) + +/* + * The following bits are implemented by the TLB hardware + */ +#define _PAGE_GLOBAL_SHIFT (_PAGE_MODIFIED_SHIFT + 4) +#define _PAGE_GLOBAL (1 << _PAGE_GLOBAL_SHIFT) +#define _PAGE_VALID_SHIFT (_PAGE_GLOBAL_SHIFT + 1) +#define _PAGE_VALID (1 << _PAGE_VALID_SHIFT) +#define _PAGE_DIRTY_SHIFT (_PAGE_VALID_SHIFT + 1) +#define _PAGE_DIRTY (1 << _PAGE_DIRTY_SHIFT) +#define _CACHE_UNCACHED_SHIFT (_PAGE_DIRTY_SHIFT + 1) +#define _CACHE_UNCACHED (1 << _CACHE_UNCACHED_SHIFT) +#define _CACHE_MASK _CACHE_UNCACHED + +#define _PFN_SHIFT PAGE_SHIFT + +#else +/* + * Below are the "Normal" R4K cases + */ + +/* + * The following bits are implemented in software + */ +#define _PAGE_PRESENT_SHIFT 0 +#define _PAGE_PRESENT (1 << _PAGE_PRESENT_SHIFT) +/* R2 or later cores check for RI/XI support to determine _PAGE_READ */ +#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6) +#define _PAGE_WRITE_SHIFT (_PAGE_PRESENT_SHIFT + 1) +#define _PAGE_WRITE (1 << _PAGE_WRITE_SHIFT) +#else +#define _PAGE_READ_SHIFT (_PAGE_PRESENT_SHIFT + 1) +#define _PAGE_READ (1 << _PAGE_READ_SHIFT) +#define _PAGE_WRITE_SHIFT (_PAGE_READ_SHIFT + 1) +#define _PAGE_WRITE (1 << _PAGE_WRITE_SHIFT) +#endif +#define _PAGE_ACCESSED_SHIFT (_PAGE_WRITE_SHIFT + 1) +#define _PAGE_ACCESSED (1 << _PAGE_ACCESSED_SHIFT) +#define _PAGE_MODIFIED_SHIFT (_PAGE_ACCESSED_SHIFT + 1) +#define _PAGE_MODIFIED (1 << _PAGE_MODIFIED_SHIFT) + +#if defined(CONFIG_64BIT) && defined(CONFIG_MIPS_HUGE_TLB_SUPPORT) +/* Huge TLB page */ +#define _PAGE_HUGE_SHIFT (_PAGE_MODIFIED_SHIFT + 1) +#define _PAGE_HUGE (1 << _PAGE_HUGE_SHIFT) +#define _PAGE_SPLITTING_SHIFT (_PAGE_HUGE_SHIFT + 1) +#define _PAGE_SPLITTING (1 << _PAGE_SPLITTING_SHIFT) +#endif /* CONFIG_64BIT && CONFIG_MIPS_HUGE_TLB_SUPPORT */ + +#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6) +/* XI - page cannot be executed */ +#ifdef _PAGE_SPLITTING_SHIFT +#define _PAGE_NO_EXEC_SHIFT (_PAGE_SPLITTING_SHIFT + 1) +#else +#define _PAGE_NO_EXEC_SHIFT (_PAGE_MODIFIED_SHIFT + 1) +#endif +#define _PAGE_NO_EXEC (cpu_has_rixi ? (1 << _PAGE_NO_EXEC_SHIFT) : 0) + +/* RI - page cannot be read */ +#define _PAGE_READ_SHIFT (_PAGE_NO_EXEC_SHIFT + 1) +#define _PAGE_READ (cpu_has_rixi ? 0 : (1 << _PAGE_READ_SHIFT)) +#define _PAGE_NO_READ_SHIFT _PAGE_READ_SHIFT +#define _PAGE_NO_READ (cpu_has_rixi ? (1 << _PAGE_READ_SHIFT) : 0) +#endif /* defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6) */ + +#if defined(_PAGE_NO_READ_SHIFT) +#define _PAGE_GLOBAL_SHIFT (_PAGE_NO_READ_SHIFT + 1) +#elif defined(_PAGE_SPLITTING_SHIFT) +#define _PAGE_GLOBAL_SHIFT (_PAGE_SPLITTING_SHIFT + 1) +#else +#define _PAGE_GLOBAL_SHIFT (_PAGE_MODIFIED_SHIFT + 1) +#endif +#define _PAGE_GLOBAL (1 << _PAGE_GLOBAL_SHIFT) + +#define _PAGE_VALID_SHIFT (_PAGE_GLOBAL_SHIFT + 1) +#define _PAGE_VALID (1 << _PAGE_VALID_SHIFT) +#define _PAGE_DIRTY_SHIFT (_PAGE_VALID_SHIFT + 1) +#define _PAGE_DIRTY (1 << _PAGE_DIRTY_SHIFT) +#define _CACHE_SHIFT (_PAGE_DIRTY_SHIFT + 1) +#define _CACHE_MASK (7 << _CACHE_SHIFT) + +#define _PFN_SHIFT (PAGE_SHIFT - 12 + _CACHE_SHIFT + 3) + +#endif /* defined(CONFIG_PHYS_ADDR_T_64BIT && defined(CONFIG_CPU_MIPS32) */ + +#ifndef _PAGE_NO_EXEC +#define _PAGE_NO_EXEC 0 +#endif +#ifndef _PAGE_NO_READ +#define _PAGE_NO_READ 0 +#endif + +#define _PAGE_SILENT_READ _PAGE_VALID +#define _PAGE_SILENT_WRITE _PAGE_DIRTY + +#define _PFN_MASK (~((1 << (_PFN_SHIFT)) - 1)) + +/* + * The final layouts of the PTE bits are: + * + * 64-bit, R1 or earlier: CCC D V G [S H] M A W R P + * 32-bit, R1 or earler: CCC D V G M A W R P + * 64-bit, R2 or later: CCC D V G RI/R XI [S H] M A W P + * 32-bit, R2 or later: CCC D V G RI/R XI M A W P + */ + + +#ifndef __ASSEMBLY__ +/* + * pte_to_entrylo converts a page table entry (PTE) into a Mips + * entrylo0/1 value. + */ +static inline uint64_t pte_to_entrylo(unsigned long pte_val) +{ +#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6) + if (cpu_has_rixi) { + int sa; +#ifdef CONFIG_32BIT + sa = 31 - _PAGE_NO_READ_SHIFT; +#else + sa = 63 - _PAGE_NO_READ_SHIFT; +#endif + /* + * C has no way to express that this is a DSRL + * _PAGE_NO_EXEC_SHIFT followed by a ROTR 2. Luckily + * in the fast path this is done in assembly + */ + return (pte_val >> _PAGE_GLOBAL_SHIFT) | + ((pte_val & (_PAGE_NO_EXEC | _PAGE_NO_READ)) << sa); + } +#endif + + return pte_val >> _PAGE_GLOBAL_SHIFT; +} +#endif + +/* + * Cache attributes + */ +#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) + +#define _CACHE_CACHABLE_NONCOHERENT 0 +#define _CACHE_UNCACHED_ACCELERATED _CACHE_UNCACHED + +#elif defined(CONFIG_CPU_SB1) + +/* No penalty for being coherent on the SB1, so just + use it for "noncoherent" spaces, too. Shouldn't hurt. */ + +#define _CACHE_CACHABLE_NONCOHERENT (5<<_CACHE_SHIFT) + +#elif defined(CONFIG_CPU_LOONGSON3) + +/* Using COHERENT flag for NONCOHERENT doesn't hurt. */ + +#define _CACHE_CACHABLE_NONCOHERENT (3<<_CACHE_SHIFT) /* LOONGSON */ +#define _CACHE_CACHABLE_COHERENT (3<<_CACHE_SHIFT) /* LOONGSON-3 */ + +#elif defined(CONFIG_MACH_INGENIC) + +/* Ingenic uses the WA bit to achieve write-combine memory writes */ +#define _CACHE_UNCACHED_ACCELERATED (1<<_CACHE_SHIFT) + +#endif + +#ifndef _CACHE_CACHABLE_NO_WA +#define _CACHE_CACHABLE_NO_WA (0<<_CACHE_SHIFT) +#endif +#ifndef _CACHE_CACHABLE_WA +#define _CACHE_CACHABLE_WA (1<<_CACHE_SHIFT) +#endif +#ifndef _CACHE_UNCACHED +#define _CACHE_UNCACHED (2<<_CACHE_SHIFT) +#endif +#ifndef _CACHE_CACHABLE_NONCOHERENT +#define _CACHE_CACHABLE_NONCOHERENT (3<<_CACHE_SHIFT) +#endif +#ifndef _CACHE_CACHABLE_CE +#define _CACHE_CACHABLE_CE (4<<_CACHE_SHIFT) +#endif +#ifndef _CACHE_CACHABLE_COW +#define _CACHE_CACHABLE_COW (5<<_CACHE_SHIFT) +#endif +#ifndef _CACHE_CACHABLE_CUW +#define _CACHE_CACHABLE_CUW (6<<_CACHE_SHIFT) +#endif +#ifndef _CACHE_UNCACHED_ACCELERATED +#define _CACHE_UNCACHED_ACCELERATED (7<<_CACHE_SHIFT) +#endif + +#define __READABLE (_PAGE_SILENT_READ | _PAGE_READ | _PAGE_ACCESSED) +#define __WRITEABLE (_PAGE_SILENT_WRITE | _PAGE_WRITE | _PAGE_MODIFIED) + +#define _PAGE_CHG_MASK (_PAGE_ACCESSED | _PAGE_MODIFIED | \ + _PFN_MASK | _CACHE_MASK) + +#endif /* _ASM_PGTABLE_BITS_H */ diff --git a/arch/mips/include/asm/posix_types.h b/arch/mips/include/asm/posix_types.h index 4deac5207aa..90c0affdee3 100644 --- a/arch/mips/include/asm/posix_types.h +++ b/arch/mips/include/asm/posix_types.h @@ -1,10 +1,7 @@ -/* $Id: posix_types.h,v 1.6 2000/02/04 23:32:54 ralf Exp $ - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * +/* * Copyright (C) 1996, 1997, 1998, 2000 by Ralf Baechle + * + * SPDX-License-Identifier: GPL-2.0 */ #ifndef _ASM_POSIX_TYPES_H #define _ASM_POSIX_TYPES_H diff --git a/arch/mips/include/asm/processor.h b/arch/mips/include/asm/processor.h index ba7f5381a3a..02a3b167f53 100644 --- a/arch/mips/include/asm/processor.h +++ b/arch/mips/include/asm/processor.h @@ -1,12 +1,10 @@ /* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * * Copyright (C) 1994 Waldorf GMBH * Copyright (C) 1995, 1996, 1997, 1998, 1999, 2001, 2002, 2003 Ralf Baechle * Copyright (C) 1996 Paul M. Antoine * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + * + * SPDX-License-Identifier: GPL-2.0 */ #ifndef _ASM_PROCESSOR_H #define _ASM_PROCESSOR_H diff --git a/arch/mips/include/asm/ptrace.h b/arch/mips/include/asm/ptrace.h index 5659c0c873a..da051f6e10b 100644 --- a/arch/mips/include/asm/ptrace.h +++ b/arch/mips/include/asm/ptrace.h @@ -1,35 +1,27 @@ /* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * * Copyright (C) 1994, 95, 96, 97, 98, 99, 2000 by Ralf Baechle * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + * + * SPDX-License-Identifier: GPL-2.0 */ #ifndef _ASM_PTRACE_H #define _ASM_PTRACE_H -/* 0 - 31 are integer registers, 32 - 63 are fp registers. */ -#define FPR_BASE 32 -#define PC 64 -#define CAUSE 65 -#define BADVADDR 66 -#define MMHI 67 -#define MMLO 68 -#define FPC_CSR 69 -#define FPC_EIR 70 -#define DSP_BASE 71 /* 3 more hi / lo register pairs */ -#define DSP_CONTROL 77 -#define ACX 78 +#include <linux/compiler.h> +#include <linux/types.h> +#include <asm/isadep.h> /* * This struct defines the way the registers are stored on the stack during a * system call/exception. As usual the registers k0/k1 aren't being saved. + * + * If you add a register here, also add it to regoffset_table[] in + * arch/mips/kernel/ptrace.c. */ struct pt_regs { #ifdef CONFIG_32BIT /* Pad bytes for argument save space on the stack. */ - unsigned long pad0[6]; + unsigned long pad0[8]; #endif /* Saved main processor registers. */ @@ -45,34 +37,50 @@ struct pt_regs { unsigned long cp0_badvaddr; unsigned long cp0_cause; unsigned long cp0_epc; -#ifdef CONFIG_MIPS_MT_SMTC - unsigned long cp0_tcstatus; -#endif /* CONFIG_MIPS_MT_SMTC */ -} __attribute__ ((aligned (8))); +#ifdef CONFIG_CPU_CAVIUM_OCTEON + unsigned long long mpl[6]; /* MTM{0-5} */ + unsigned long long mtp[6]; /* MTP{0-5} */ +#endif + unsigned long __last[0]; +} __aligned(8); -/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ -#define PTRACE_GETREGS 12 -#define PTRACE_SETREGS 13 -#define PTRACE_GETFPREGS 14 -#define PTRACE_SETFPREGS 15 -/* #define PTRACE_GETFPXREGS 18 */ -/* #define PTRACE_SETFPXREGS 19 */ +static inline unsigned long kernel_stack_pointer(struct pt_regs *regs) +{ + return regs->regs[31]; +} -#define PTRACE_OLDSETOPTIONS 21 +/* + * Don't use asm-generic/ptrace.h it defines FP accessors that don't make + * sense on MIPS. We rather want an error if they get invoked. + */ -#define PTRACE_GET_THREAD_AREA 25 -#define PTRACE_SET_THREAD_AREA 26 +static inline void instruction_pointer_set(struct pt_regs *regs, + unsigned long val) +{ + regs->cp0_epc = val; +} -/* Calls to trace a 64bit program from a 32bit program. */ -#define PTRACE_PEEKTEXT_3264 0xc0 -#define PTRACE_PEEKDATA_3264 0xc1 -#define PTRACE_POKETEXT_3264 0xc2 -#define PTRACE_POKEDATA_3264 0xc3 -#define PTRACE_GET_THREAD_AREA_3264 0xc4 +/* Query offset/name of register from its name/offset */ +extern int regs_query_register_offset(const char *name); +#define MAX_REG_OFFSET (offsetof(struct pt_regs, __last)) -#ifdef __KERNEL__ +/** + * regs_get_register() - get register value from its offset + * @regs: pt_regs from which register value is gotten. + * @offset: offset number of the register. + * + * regs_get_register returns the value of a register. The @offset is the + * offset of the register in struct pt_regs address which specified by @regs. + * If @offset is bigger than MAX_REG_OFFSET, this returns 0. + */ +static inline unsigned long regs_get_register(struct pt_regs *regs, + unsigned int offset) +{ + if (unlikely(offset > MAX_REG_OFFSET)) + return 0; -#include <asm/isadep.h> + return *(unsigned long *)((unsigned long)regs + offset); +} /* * Does the process account for user or for system time? @@ -82,6 +90,17 @@ struct pt_regs { #define instruction_pointer(regs) ((regs)->cp0_epc) #define profile_pc(regs) instruction_pointer(regs) -#endif +/* Helpers for working with the user stack pointer */ + +static inline unsigned long user_stack_pointer(struct pt_regs *regs) +{ + return regs->regs[29]; +} + +static inline void user_stack_pointer_set(struct pt_regs *regs, + unsigned long val) +{ + regs->regs[29] = val; +} #endif /* _ASM_PTRACE_H */ diff --git a/arch/mips/include/asm/reboot.h b/arch/mips/include/asm/reboot.h index 978d2068163..2a6b7244e7e 100644 --- a/arch/mips/include/asm/reboot.h +++ b/arch/mips/include/asm/reboot.h @@ -1,10 +1,8 @@ /* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * * Copyright (C) 1997, 1999, 2001, 06 by Ralf Baechle * Copyright (C) 2001 MIPS Technologies, Inc. + * + * SPDX-License-Identifier: GPL-2.0 */ #ifndef _ASM_REBOOT_H #define _ASM_REBOOT_H diff --git a/arch/mips/include/asm/reg.h b/arch/mips/include/asm/reg.h index fc6bc0c169e..af6fbb469e7 100644 --- a/arch/mips/include/asm/reg.h +++ b/arch/mips/include/asm/reg.h @@ -2,12 +2,10 @@ * Various register offset definitions for debuggers, core file * examiners and whatnot. * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * * Copyright (C) 1995, 1999 by Ralf Baechle * Copyright (C) 1995, 1999 Silicon Graphics + * + * SPDX-License-Identifier: GPL-2.0 */ #ifndef __ASM_MIPS_REG_H #define __ASM_MIPS_REG_H diff --git a/arch/mips/include/asm/regdef.h b/arch/mips/include/asm/regdef.h index 2e65cc3c438..f1efc457915 100644 --- a/arch/mips/include/asm/regdef.h +++ b/arch/mips/include/asm/regdef.h @@ -1,11 +1,11 @@ /* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * * Copyright (C) 1985 MIPS Computer Systems, Inc. * Copyright (C) 1994, 95, 99, 2003 by Ralf Baechle * Copyright (C) 1990 - 1992, 1999 Silicon Graphics, Inc. + * Copyright (C) 2011 Wind River Systems, + * written by Ralf Baechle <ralf@linux-mips.org> + * + * SPDX-License-Identifier: GPL-2.0 */ #ifndef _ASM_REGDEF_H #define _ASM_REGDEF_H @@ -30,9 +30,13 @@ #define t2 $10 #define t3 $11 #define t4 $12 +#define ta0 $12 #define t5 $13 +#define ta1 $13 #define t6 $14 +#define ta2 $14 #define t7 $15 +#define ta3 $15 #define s0 $16 /* callee saved */ #define s1 $17 #define s2 $18 diff --git a/arch/mips/include/asm/sgidefs.h b/arch/mips/include/asm/sgidefs.h index 67f26589583..2a0388652ad 100644 --- a/arch/mips/include/asm/sgidefs.h +++ b/arch/mips/include/asm/sgidefs.h @@ -1,11 +1,9 @@ /* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * * Copyright (C) 1996, 1999, 2001 Ralf Baechle * Copyright (C) 1999 Silicon Graphics, Inc. * Copyright (C) 2001 MIPS Technologies, Inc. + * + * SPDX-License-Identifier: GPL-2.0 */ #ifndef __ASM_SGIDEFS_H #define __ASM_SGIDEFS_H diff --git a/arch/mips/include/asm/string.h b/arch/mips/include/asm/string.h index 579a591e629..1fbe899aaa8 100644 --- a/arch/mips/include/asm/string.h +++ b/arch/mips/include/asm/string.h @@ -1,11 +1,9 @@ /* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * * Copyright (c) 1994, 95, 96, 97, 98, 2000, 01 Ralf Baechle * Copyright (c) 2000 by Silicon Graphics, Inc. * Copyright (c) 2001 MIPS Technologies, Inc. + * + * SPDX-License-Identifier: GPL-2.0 */ #ifndef _ASM_STRING_H #define _ASM_STRING_H diff --git a/arch/mips/include/asm/system.h b/arch/mips/include/asm/system.h index d56f73b8b8e..e6435cce294 100644 --- a/arch/mips/include/asm/system.h +++ b/arch/mips/include/asm/system.h @@ -1,8 +1,4 @@ /* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * * Copyright (C) 1994 - 1999 by Ralf Baechle * Copyright (C) 1996 by Paul M. Antoine * Copyright (C) 1994 - 1999 by Ralf Baechle @@ -12,6 +8,8 @@ * * Kevin D. Kissell, kevink@mips.org and Carsten Langgaard, carstenl@mips.com * Copyright (C) 2000 MIPS Technologies, Inc. + * + * SPDX-License-Identifier: GPL-2.0 */ #ifndef _ASM_SYSTEM_H #define _ASM_SYSTEM_H diff --git a/arch/mips/include/asm/types.h b/arch/mips/include/asm/types.h index aebafdbba1b..627440dc24c 100644 --- a/arch/mips/include/asm/types.h +++ b/arch/mips/include/asm/types.h @@ -1,10 +1,8 @@ /* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * * Copyright (C) 1994, 1995, 1996, 1999 by Ralf Baechle * Copyright (C) 1999 Silicon Graphics, Inc. + * + * SPDX-License-Identifier: GPL-2.0 */ #ifndef _ASM_TYPES_H #define _ASM_TYPES_H diff --git a/arch/mips/include/asm/unaligned.h b/arch/mips/include/asm/unaligned.h index c25a8462c72..eebe06a9c91 100644 --- a/arch/mips/include/asm/unaligned.h +++ b/arch/mips/include/asm/unaligned.h @@ -1,9 +1,7 @@ /* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) + * + * SPDX-License-Identifier: GPL-2.0 */ #ifndef _ASM_MIPS_UNALIGNED_H #define _ASM_MIPS_UNALIGNED_H |