diff options
Diffstat (limited to 'arch/riscv')
| -rw-r--r-- | arch/riscv/Kconfig | 99 | ||||
| -rw-r--r-- | arch/riscv/Makefile | 5 | ||||
| -rw-r--r-- | arch/riscv/cpu/generic/dram.c | 16 | ||||
| -rw-r--r-- | arch/riscv/dts/binman.dtsi | 38 | ||||
| -rw-r--r-- | arch/riscv/dts/sunxi-d1-t113.dtsi | 15 | ||||
| -rw-r--r-- | arch/riscv/dts/sunxi-d1s-t113.dtsi | 927 | ||||
| -rw-r--r-- | arch/riscv/include/asm/string.h | 18 | ||||
| -rw-r--r-- | arch/riscv/lib/Makefile | 3 | ||||
| -rw-r--r-- | arch/riscv/lib/andes_plicsw.c | 24 | ||||
| -rw-r--r-- | arch/riscv/lib/strcmp_zbb.S | 81 | ||||
| -rw-r--r-- | arch/riscv/lib/strlen_zbb.S | 101 | ||||
| -rw-r--r-- | arch/riscv/lib/strncmp_zbb.S | 94 |
12 files changed, 1387 insertions, 34 deletions
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig index 183885ebe7d..e291456530b 100644 --- a/arch/riscv/Kconfig +++ b/arch/riscv/Kconfig @@ -187,6 +187,97 @@ config RISCV_ISA_D riscv32 ABI from ilp32 to ilp32d and the riscv64 ABI from lp64 to lp64d. +config RISCV_ISA_ZBB + bool "Zbb extension support for bit manipulation instructions" + help + Adds ZBB extension (basic bit manipulation) to the ISA subsets + that the toolchain is allowed to emit when building U-Boot. + The Zbb extension provides instructions to accelerate a number + of bit-specific operations (count bit population, sign extending, + bitrotation, etc) and enables optimized string routines. + +menu "Use assembly optimized implementation of string routines" + +config USE_ARCH_STRLEN + bool "Use an assembly optimized implementation of strlen" + default y + depends on RISCV_ISA_ZBB + help + Enable the generation of an optimized version of strlen using + Zbb extension. + +config SPL_USE_ARCH_STRLEN + bool "Use an assembly optimized implementation of strlen for SPL" + default y if USE_ARCH_STRLEN + depends on RISCV_ISA_ZBB + depends on SPL + help + Enable the generation of an optimized version of strlen using + Zbb extension. + +config TPL_USE_ARCH_STRLEN + bool "Use an assembly optimized implementation of strlen for TPL" + default y if USE_ARCH_STRLEN + depends on RISCV_ISA_ZBB + depends on TPL + help + Enable the generation of an optimized version of strlen using + Zbb extension. + +config USE_ARCH_STRCMP + bool "Use an assembly optimized implementation of strcmp" + default y + depends on RISCV_ISA_ZBB + help + Enable the generation of an optimized version of strcmp using + Zbb extension. + +config SPL_USE_ARCH_STRCMP + bool "Use an assembly optimized implementation of strcmp for SPL" + default y if USE_ARCH_STRCMP + depends on RISCV_ISA_ZBB + depends on SPL + help + Enable the generation of an optimized version of strcmp using + Zbb extension. + +config TPL_USE_ARCH_STRCMP + bool "Use an assembly optimized implementation of strcmp for TPL" + default y if USE_ARCH_STRCMP + depends on RISCV_ISA_ZBB + depends on TPL + help + Enable the generation of an optimized version of strcmp using + Zbb extension. + +config USE_ARCH_STRNCMP + bool "Use an assembly optimized implementation of strncmp" + default y + depends on RISCV_ISA_ZBB + help + Enable the generation of an optimized version of strncmp using + Zbb extension. + +config SPL_USE_ARCH_STRNCMP + bool "Use an assembly optimized implementation of strncmp for SPL" + default y if USE_ARCH_STRNCMP + depends on RISCV_ISA_ZBB + depends on SPL + help + Enable the generation of an optimized version of strncmp using + Zbb extension. + +config TPL_USE_ARCH_STRNCMP + bool "Use an assembly optimized implementation of strncmp for TPL" + default y if USE_ARCH_STRNCMP + depends on RISCV_ISA_ZBB + depends on TPL + help + Enable the generation of an optimized version of strncmp using + Zbb extension. + +endmenu + config RISCV_ISA_A def_bool y @@ -424,4 +515,12 @@ config TPL_USE_ARCH_MEMSET endmenu +config SPL_LOAD_FIT_OPENSBI_OS_BOOT + bool "Enable SPL (OpenSBI OS boot mode) applying linux from FIT" + depends on SPL_LOAD_FIT + help + Use fw_dynamic from the FIT image, and u-boot SPL will invoke it directly. + This is a shortcut boot flow, from u-boot SPL -> OpenSBI -> u-boot proper + -> linux to u-boot SPL -> OpenSBI -> linux. + endmenu diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile index 4963b5109b2..b3ef87078b5 100644 --- a/arch/riscv/Makefile +++ b/arch/riscv/Makefile @@ -24,6 +24,9 @@ endif ifeq ($(CONFIG_RISCV_ISA_C),y) ARCH_C = c endif +ifeq ($(CONFIG_RISCV_ISA_ZBB),y) + ARCH_ZBB = _zbb +endif ifeq ($(CONFIG_CMODEL_MEDLOW),y) CMODEL = medlow endif @@ -32,7 +35,7 @@ ifeq ($(CONFIG_CMODEL_MEDANY),y) endif -RISCV_MARCH = $(ARCH_BASE)$(ARCH_A)$(ARCH_F)$(ARCH_D)$(ARCH_C) +RISCV_MARCH = $(ARCH_BASE)$(ARCH_A)$(ARCH_F)$(ARCH_D)$(ARCH_C)$(ARCH_ZBB) ABI = $(ABI_BASE)$(ABI_D) # Newer binutils versions default to ISA spec version 20191213 which moves some diff --git a/arch/riscv/cpu/generic/dram.c b/arch/riscv/cpu/generic/dram.c index 94d8018407e..1b51bae9b66 100644 --- a/arch/riscv/cpu/generic/dram.c +++ b/arch/riscv/cpu/generic/dram.c @@ -20,19 +20,3 @@ int dram_init_banksize(void) { return fdtdec_setup_memory_banksize(); } - -phys_addr_t board_get_usable_ram_top(phys_size_t total_size) -{ - /* - * Ensure that we run from first 4GB so that all - * addresses used by U-Boot are 32bit addresses. - * - * This in-turn ensures that 32bit DMA capable - * devices work fine because DMA mapping APIs will - * provide 32bit DMA addresses only. - */ - if (gd->ram_top >= SZ_4G) - return SZ_4G - 1; - - return gd->ram_top; -} diff --git a/arch/riscv/dts/binman.dtsi b/arch/riscv/dts/binman.dtsi index 156cb00971e..6b4eb8dc7b9 100644 --- a/arch/riscv/dts/binman.dtsi +++ b/arch/riscv/dts/binman.dtsi @@ -5,6 +5,9 @@ #include <config.h> +#define U64_TO_U32_H(addr) (((addr) >> 32) & 0xffffffff) +#define U64_TO_U32_L(addr) ((addr) & 0xffffffff) + / { binman: binman { multiple-images; @@ -13,26 +16,47 @@ &binman { itb { + +#ifndef CONFIG_SPL_LOAD_FIT_OPENSBI_OS_BOOT filename = "u-boot.itb"; +#else + filename = "linux.itb"; +#endif fit { description = "Configuration to load OpenSBI before U-Boot"; - #address-cells = <1>; + #address-cells = <2>; fit,fdt-list = "of-list"; images { +#ifndef CONFIG_SPL_LOAD_FIT_OPENSBI_OS_BOOT uboot { description = "U-Boot"; type = "standalone"; os = "U-Boot"; arch = "riscv"; compression = "none"; - load = <CONFIG_TEXT_BASE>; + load = <U64_TO_U32_H(CONFIG_TEXT_BASE) + U64_TO_U32_L(CONFIG_TEXT_BASE)>; uboot_blob: blob-ext { filename = "u-boot-nodtb.bin"; }; }; +#else + linux { + description = "Linux"; + type = "standalone"; + os = "Linux"; + arch = "riscv"; + compression = "none"; + load = <CONFIG_TEXT_BASE>; + + linux_blob: blob-ext { + filename = "Image"; + }; + }; +#endif opensbi { description = "OpenSBI fw_dynamic Firmware"; @@ -40,8 +64,10 @@ os = "opensbi"; arch = "riscv"; compression = "none"; - load = <CONFIG_SPL_OPENSBI_LOAD_ADDR>; - entry = <CONFIG_SPL_OPENSBI_LOAD_ADDR>; + load = <U64_TO_U32_H(CONFIG_SPL_OPENSBI_LOAD_ADDR) + U64_TO_U32_L(CONFIG_SPL_OPENSBI_LOAD_ADDR)>; + entry = <U64_TO_U32_H(CONFIG_SPL_OPENSBI_LOAD_ADDR) + U64_TO_U32_L(CONFIG_SPL_OPENSBI_LOAD_ADDR)>; opensbi_blob: opensbi { filename = "fw_dynamic.bin"; @@ -68,7 +94,11 @@ #endif description = "NAME"; firmware = "opensbi"; +#ifndef CONFIG_SPL_LOAD_FIT_OPENSBI_OS_BOOT loadables = "uboot"; +#else + loadables = "linux"; +#endif #ifndef CONFIG_OF_BOARD fdt = "fdt-SEQ"; #endif diff --git a/arch/riscv/dts/sunxi-d1-t113.dtsi b/arch/riscv/dts/sunxi-d1-t113.dtsi new file mode 100644 index 00000000000..b7156123df5 --- /dev/null +++ b/arch/riscv/dts/sunxi-d1-t113.dtsi @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +// Copyright (C) 2021-2022 Samuel Holland <samuel@sholland.org> + +/ { + soc { + dsp_wdt: watchdog@1700400 { + compatible = "allwinner,sun20i-d1-wdt"; + reg = <0x1700400 0x20>; + interrupts = <SOC_PERIPHERAL_IRQ(122) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&dcxo>, <&rtc CLK_OSC32K>; + clock-names = "hosc", "losc"; + status = "reserved"; + }; + }; +}; diff --git a/arch/riscv/dts/sunxi-d1s-t113.dtsi b/arch/riscv/dts/sunxi-d1s-t113.dtsi new file mode 100644 index 00000000000..822f022eec2 --- /dev/null +++ b/arch/riscv/dts/sunxi-d1s-t113.dtsi @@ -0,0 +1,927 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +// Copyright (C) 2021-2022 Samuel Holland <samuel@sholland.org> + +#include <dt-bindings/clock/sun6i-rtc.h> +#include <dt-bindings/clock/sun8i-de2.h> +#include <dt-bindings/clock/sun8i-tcon-top.h> +#include <dt-bindings/clock/sun20i-d1-ccu.h> +#include <dt-bindings/clock/sun20i-d1-r-ccu.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/reset/sun8i-de2.h> +#include <dt-bindings/reset/sun20i-d1-ccu.h> +#include <dt-bindings/reset/sun20i-d1-r-ccu.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + + dcxo: dcxo-clk { + compatible = "fixed-clock"; + clock-output-names = "dcxo"; + #clock-cells = <0>; + }; + + de: display-engine { + compatible = "allwinner,sun20i-d1-display-engine"; + allwinner,pipelines = <&mixer0>, <&mixer1>; + status = "disabled"; + }; + + soc { + compatible = "simple-bus"; + ranges; + dma-noncoherent; + #address-cells = <1>; + #size-cells = <1>; + + pio: pinctrl@2000000 { + compatible = "allwinner,sun20i-d1-pinctrl"; + reg = <0x2000000 0x800>; + interrupts = <SOC_PERIPHERAL_IRQ(69) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(71) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(73) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(75) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(77) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(79) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_APB0>, + <&dcxo>, + <&rtc CLK_OSC32K>; + clock-names = "apb", "hosc", "losc"; + gpio-controller; + interrupt-controller; + #gpio-cells = <3>; + #interrupt-cells = <3>; + + /omit-if-no-ref/ + can0_pins: can0-pins { + pins = "PB2", "PB3"; + function = "can0"; + }; + + /omit-if-no-ref/ + can1_pins: can1-pins { + pins = "PB4", "PB5"; + function = "can1"; + }; + + /omit-if-no-ref/ + clk_pg11_pin: clk-pg11-pin { + pins = "PG11"; + function = "clk"; + }; + + /omit-if-no-ref/ + dsi_4lane_pins: dsi-4lane-pins { + pins = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", + "PD6", "PD7", "PD8", "PD9"; + drive-strength = <30>; + function = "dsi"; + }; + + /omit-if-no-ref/ + lcd_rgb666_pins: lcd-rgb666-pins { + pins = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", + "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", + "PD12", "PD13", "PD14", "PD15", "PD16", "PD17", + "PD18", "PD19", "PD20", "PD21"; + function = "lcd0"; + }; + + /omit-if-no-ref/ + mmc0_pins: mmc0-pins { + pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; + function = "mmc0"; + }; + + /omit-if-no-ref/ + mmc1_pins: mmc1-pins { + pins = "PG0", "PG1", "PG2", "PG3", "PG4", "PG5"; + function = "mmc1"; + }; + + /omit-if-no-ref/ + mmc2_pins: mmc2-pins { + pins = "PC2", "PC3", "PC4", "PC5", "PC6", "PC7"; + function = "mmc2"; + }; + + /omit-if-no-ref/ + rgmii_pe_pins: rgmii-pe-pins { + pins = "PE0", "PE1", "PE2", "PE3", "PE4", + "PE5", "PE6", "PE7", "PE8", "PE9", + "PE11", "PE12", "PE13", "PE14", "PE15"; + function = "emac"; + }; + + /omit-if-no-ref/ + rmii_pe_pins: rmii-pe-pins { + pins = "PE0", "PE1", "PE2", "PE3", "PE4", + "PE5", "PE6", "PE7", "PE8", "PE9"; + function = "emac"; + }; + + /omit-if-no-ref/ + spi0_pins: spi0-pins { + pins = "PC2", "PC3", "PC4", "PC5"; + function = "spi0"; + }; + + /omit-if-no-ref/ + uart1_pg6_pins: uart1-pg6-pins { + pins = "PG6", "PG7"; + function = "uart1"; + }; + + /omit-if-no-ref/ + uart1_pg8_rts_cts_pins: uart1-pg8-rts-cts-pins { + pins = "PG8", "PG9"; + function = "uart1"; + }; + + /omit-if-no-ref/ + uart3_pb_pins: uart3-pb-pins { + pins = "PB6", "PB7"; + function = "uart3"; + }; + }; + + ccu: clock-controller@2001000 { + compatible = "allwinner,sun20i-d1-ccu"; + reg = <0x2001000 0x1000>; + clocks = <&dcxo>, + <&rtc CLK_OSC32K>, + <&rtc CLK_IOSC>; + clock-names = "hosc", "losc", "iosc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + gpadc: adc@2009000 { + compatible = "allwinner,sun20i-d1-gpadc"; + reg = <0x2009000 0x400>; + clocks = <&ccu CLK_BUS_GPADC>; + resets = <&ccu RST_BUS_GPADC>; + interrupts = <SOC_PERIPHERAL_IRQ(57) IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + #io-channel-cells = <1>; + }; + + dmic: dmic@2031000 { + compatible = "allwinner,sun20i-d1-dmic", + "allwinner,sun50i-h6-dmic"; + reg = <0x2031000 0x400>; + interrupts = <SOC_PERIPHERAL_IRQ(24) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_DMIC>, + <&ccu CLK_DMIC>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_DMIC>; + dmas = <&dma 8>; + dma-names = "rx"; + status = "disabled"; + #sound-dai-cells = <0>; + }; + + i2s1: i2s@2033000 { + compatible = "allwinner,sun20i-d1-i2s", + "allwinner,sun50i-r329-i2s"; + reg = <0x2033000 0x1000>; + interrupts = <SOC_PERIPHERAL_IRQ(27) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2S1>, + <&ccu CLK_I2S1>; + clock-names = "apb", "mod"; + resets = <&ccu RST_BUS_I2S1>; + dmas = <&dma 4>, <&dma 4>; + dma-names = "rx", "tx"; + status = "disabled"; + #sound-dai-cells = <0>; + }; + + i2s2: i2s@2034000 { + compatible = "allwinner,sun20i-d1-i2s", + "allwinner,sun50i-r329-i2s"; + reg = <0x2034000 0x1000>; + interrupts = <SOC_PERIPHERAL_IRQ(28) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2S2>, + <&ccu CLK_I2S2>; + clock-names = "apb", "mod"; + resets = <&ccu RST_BUS_I2S2>; + dmas = <&dma 5>, <&dma 5>; + dma-names = "rx", "tx"; + status = "disabled"; + #sound-dai-cells = <0>; + }; + + timer: timer@2050000 { + compatible = "allwinner,sun20i-d1-timer", + "allwinner,sun8i-a23-timer"; + reg = <0x2050000 0xa0>; + interrupts = <SOC_PERIPHERAL_IRQ(59) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(60) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&dcxo>; + }; + + wdt: watchdog@20500a0 { + compatible = "allwinner,sun20i-d1-wdt-reset", + "allwinner,sun20i-d1-wdt"; + reg = <0x20500a0 0x20>; + interrupts = <SOC_PERIPHERAL_IRQ(63) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&dcxo>, <&rtc CLK_OSC32K>; + clock-names = "hosc", "losc"; + status = "reserved"; + }; + + uart0: serial@2500000 { + compatible = "snps,dw-apb-uart"; + reg = <0x2500000 0x400>; + reg-io-width = <4>; + reg-shift = <2>; + interrupts = <SOC_PERIPHERAL_IRQ(2) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_UART0>; + resets = <&ccu RST_BUS_UART0>; + dmas = <&dma 14>, <&dma 14>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart1: serial@2500400 { + compatible = "snps,dw-apb-uart"; + reg = <0x2500400 0x400>; + reg-io-width = <4>; + reg-shift = <2>; + interrupts = <SOC_PERIPHERAL_IRQ(3) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_UART1>; + resets = <&ccu RST_BUS_UART1>; + dmas = <&dma 15>, <&dma 15>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart2: serial@2500800 { + compatible = "snps,dw-apb-uart"; + reg = <0x2500800 0x400>; + reg-io-width = <4>; + reg-shift = <2>; + interrupts = <SOC_PERIPHERAL_IRQ(4) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_UART2>; + resets = <&ccu RST_BUS_UART2>; + dmas = <&dma 16>, <&dma 16>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart3: serial@2500c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x2500c00 0x400>; + reg-io-width = <4>; + reg-shift = <2>; + interrupts = <SOC_PERIPHERAL_IRQ(5) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_UART3>; + resets = <&ccu RST_BUS_UART3>; + dmas = <&dma 17>, <&dma 17>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart4: serial@2501000 { + compatible = "snps,dw-apb-uart"; + reg = <0x2501000 0x400>; + reg-io-width = <4>; + reg-shift = <2>; + interrupts = <SOC_PERIPHERAL_IRQ(6) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_UART4>; + resets = <&ccu RST_BUS_UART4>; + dmas = <&dma 18>, <&dma 18>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart5: serial@2501400 { + compatible = "snps,dw-apb-uart"; + reg = <0x2501400 0x400>; + reg-io-width = <4>; + reg-shift = <2>; + interrupts = <SOC_PERIPHERAL_IRQ(7) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_UART5>; + resets = <&ccu RST_BUS_UART5>; + dmas = <&dma 19>, <&dma 19>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2c0: i2c@2502000 { + compatible = "allwinner,sun20i-d1-i2c", + "allwinner,sun8i-v536-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x2502000 0x400>; + interrupts = <SOC_PERIPHERAL_IRQ(9) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2C0>; + resets = <&ccu RST_BUS_I2C0>; + dmas = <&dma 43>, <&dma 43>; + dma-names = "rx", "tx"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c1: i2c@2502400 { + compatible = "allwinner,sun20i-d1-i2c", + "allwinner,sun8i-v536-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x2502400 0x400>; + interrupts = <SOC_PERIPHERAL_IRQ(10) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2C1>; + resets = <&ccu RST_BUS_I2C1>; + dmas = <&dma 44>, <&dma 44>; + dma-names = "rx", "tx"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2: i2c@2502800 { + compatible = "allwinner,sun20i-d1-i2c", + "allwinner,sun8i-v536-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x2502800 0x400>; + interrupts = <SOC_PERIPHERAL_IRQ(11) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2C2>; + resets = <&ccu RST_BUS_I2C2>; + dmas = <&dma 45>, <&dma 45>; + dma-names = "rx", "tx"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c3: i2c@2502c00 { + compatible = "allwinner,sun20i-d1-i2c", + "allwinner,sun8i-v536-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x2502c00 0x400>; + interrupts = <SOC_PERIPHERAL_IRQ(12) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2C3>; + resets = <&ccu RST_BUS_I2C3>; + dmas = <&dma 46>, <&dma 46>; + dma-names = "rx", "tx"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + can0: can@2504000 { + compatible = "allwinner,sun20i-d1-can"; + reg = <0x02504000 0x400>; + interrupts = <SOC_PERIPHERAL_IRQ(21) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CAN0>; + resets = <&ccu RST_BUS_CAN0>; + pinctrl-names = "default"; + pinctrl-0 = <&can0_pins>; + status = "disabled"; + }; + + can1: can@2504400 { + compatible = "allwinner,sun20i-d1-can"; + reg = <0x02504400 0x400>; + interrupts = <SOC_PERIPHERAL_IRQ(22) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CAN1>; + resets = <&ccu RST_BUS_CAN1>; + pinctrl-names = "default"; + pinctrl-0 = <&can1_pins>; + status = "disabled"; + }; + + syscon: syscon@3000000 { + compatible = "allwinner,sun20i-d1-system-control"; + reg = <0x3000000 0x1000>; + ranges; + #address-cells = <1>; + #size-cells = <1>; + }; + + dma: dma-controller@3002000 { + compatible = "allwinner,sun20i-d1-dma"; + reg = <0x3002000 0x1000>; + interrupts = <SOC_PERIPHERAL_IRQ(50) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>; + clock-names = "bus", "mbus"; + resets = <&ccu RST_BUS_DMA>; + dma-channels = <16>; + dma-requests = <48>; + #dma-cells = <1>; + }; + + sid: efuse@3006000 { + compatible = "allwinner,sun20i-d1-sid"; + reg = <0x3006000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + }; + + crypto: crypto@3040000 { + compatible = "allwinner,sun20i-d1-crypto"; + reg = <0x3040000 0x800>; + interrupts = <SOC_PERIPHERAL_IRQ(52) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CE>, + <&ccu CLK_CE>, + <&ccu CLK_MBUS_CE>, + <&rtc CLK_IOSC>; + clock-names = "bus", "mod", "ram", "trng"; + resets = <&ccu RST_BUS_CE>; + }; + + mbus: dram-controller@3102000 { + compatible = "allwinner,sun20i-d1-mbus"; + reg = <0x3102000 0x1000>, + <0x3103000 0x1000>; + reg-names = "mbus", "dram"; + interrupts = <SOC_PERIPHERAL_IRQ(43) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_MBUS>, + <&ccu CLK_DRAM>, + <&ccu CLK_BUS_DRAM>; + clock-names = "mbus", "dram", "bus"; + dma-ranges = <0 0x40000000 0x80000000>; + #address-cells = <1>; + #size-cells = <1>; + #interconnect-cells = <1>; + }; + + mmc0: mmc@4020000 { + compatible = "allwinner,sun20i-d1-mmc"; + reg = <0x4020000 0x1000>; + interrupts = <SOC_PERIPHERAL_IRQ(40) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>; + clock-names = "ahb", "mmc"; + resets = <&ccu RST_BUS_MMC0>; + reset-names = "ahb"; + cap-sd-highspeed; + max-frequency = <150000000>; + no-mmc; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc1: mmc@4021000 { + compatible = "allwinner,sun20i-d1-mmc"; + reg = <0x4021000 0x1000>; + interrupts = <SOC_PERIPHERAL_IRQ(41) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>; + clock-names = "ahb", "mmc"; + resets = <&ccu RST_BUS_MMC1>; + reset-names = "ahb"; + cap-sd-highspeed; + max-frequency = <150000000>; + no-mmc; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc2: mmc@4022000 { + compatible = "allwinner,sun20i-d1-emmc", + "allwinner,sun50i-a100-emmc"; + reg = <0x4022000 0x1000>; + interrupts = <SOC_PERIPHERAL_IRQ(42) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>; + clock-names = "ahb", "mmc"; + resets = <&ccu RST_BUS_MMC2>; + reset-names = "ahb"; + cap-mmc-highspeed; + max-frequency = <150000000>; + mmc-ddr-1_8v; + mmc-ddr-3_3v; + no-sd; + no-sdio; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi0: spi@4025000 { + compatible = "allwinner,sun20i-d1-spi", + "allwinner,sun50i-r329-spi"; + reg = <0x04025000 0x1000>; + interrupts = <SOC_PERIPHERAL_IRQ(15) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>; + clock-names = "ahb", "mod"; + dmas = <&dma 22>, <&dma 22>; + dma-names = "rx", "tx"; + resets = <&ccu RST_BUS_SPI0>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi1: spi@4026000 { + compatible = "allwinner,sun20i-d1-spi-dbi", + "allwinner,sun50i-r329-spi-dbi", + "allwinner,sun50i-r329-spi"; + reg = <0x04026000 0x1000>; + interrupts = <SOC_PERIPHERAL_IRQ(16) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>; + clock-names = "ahb", "mod"; + dmas = <&dma 23>, <&dma 23>; + dma-names = "rx", "tx"; + resets = <&ccu RST_BUS_SPI1>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + usb_otg: usb@4100000 { + compatible = "allwinner,sun20i-d1-musb", + "allwinner,sun8i-a33-musb"; + reg = <0x4100000 0x400>; + interrupts = <SOC_PERIPHERAL_IRQ(29) IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mc"; + clocks = <&ccu CLK_BUS_OTG>; + resets = <&ccu RST_BUS_OTG>; + extcon = <&usbphy 0>; + phys = <&usbphy 0>; + phy-names = "usb"; + status = "disabled"; + }; + + usbphy: phy@4100400 { + compatible = "allwinner,sun20i-d1-usb-phy"; + reg = <0x4100400 0x100>, + <0x4101800 0x100>, + <0x4200800 0x100>; + reg-names = "phy_ctrl", + "pmu0", + "pmu1"; + clocks = <&dcxo>, + <&dcxo>; + clock-names = "usb0_phy", + "usb1_phy"; + resets = <&ccu RST_USB_PHY0>, + <&ccu RST_USB_PHY1>; + reset-names = "usb0_reset", + "usb1_reset"; + status = "disabled"; + #phy-cells = <1>; + }; + + ehci0: usb@4101000 { + compatible = "allwinner,sun20i-d1-ehci", + "generic-ehci"; + reg = <0x4101000 0x100>; + interrupts = <SOC_PERIPHERAL_IRQ(30) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_OHCI0>, + <&ccu CLK_BUS_EHCI0>, + <&ccu CLK_USB_OHCI0>; + resets = <&ccu RST_BUS_OHCI0>, + <&ccu RST_BUS_EHCI0>; + phys = <&usbphy 0>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci0: usb@4101400 { + compatible = "allwinner,sun20i-d1-ohci", + "generic-ohci"; + reg = <0x4101400 0x100>; + interrupts = <SOC_PERIPHERAL_IRQ(31) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_OHCI0>, + <&ccu CLK_USB_OHCI0>; + resets = <&ccu RST_BUS_OHCI0>; + phys = <&usbphy 0>; + phy-names = "usb"; + status = "disabled"; + }; + + ehci1: usb@4200000 { + compatible = "allwinner,sun20i-d1-ehci", + "generic-ehci"; + reg = <0x4200000 0x100>; + interrupts = <SOC_PERIPHERAL_IRQ(33) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_OHCI1>, + <&ccu CLK_BUS_EHCI1>, + <&ccu CLK_USB_OHCI1>; + resets = <&ccu RST_BUS_OHCI1>, + <&ccu RST_BUS_EHCI1>; + phys = <&usbphy 1>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci1: usb@4200400 { + compatible = "allwinner,sun20i-d1-ohci", + "generic-ohci"; + reg = <0x4200400 0x100>; + interrupts = <SOC_PERIPHERAL_IRQ(34) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_OHCI1>, + <&ccu CLK_USB_OHCI1>; + resets = <&ccu RST_BUS_OHCI1>; + phys = <&usbphy 1>; + phy-names = "usb"; + status = "disabled"; + }; + + emac: ethernet@4500000 { + compatible = "allwinner,sun20i-d1-emac", + "allwinner,sun50i-a64-emac"; + reg = <0x4500000 0x10000>; + interrupts = <SOC_PERIPHERAL_IRQ(46) IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + clocks = <&ccu CLK_BUS_EMAC>; + clock-names = "stmmaceth"; + resets = <&ccu RST_BUS_EMAC>; + reset-names = "stmmaceth"; + syscon = <&syscon>; + status = "disabled"; + + mdio: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + display_clocks: clock-controller@5000000 { + compatible = "allwinner,sun20i-d1-de2-clk", + "allwinner,sun50i-h5-de2-clk"; + reg = <0x5000000 0x10000>; + clocks = <&ccu CLK_BUS_DE>, <&ccu CLK_DE>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_DE>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + mixer0: mixer@5100000 { + compatible = "allwinner,sun20i-d1-de2-mixer-0"; + reg = <0x5100000 0x100000>; + clocks = <&display_clocks CLK_BUS_MIXER0>, + <&display_clocks CLK_MIXER0>; + clock-names = "bus", "mod"; + resets = <&display_clocks RST_MIXER0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mixer0_out: port@1 { + reg = <1>; + + mixer0_out_tcon_top_mixer0: endpoint { + remote-endpoint = <&tcon_top_mixer0_in_mixer0>; + }; + }; + }; + }; + + mixer1: mixer@5200000 { + compatible = "allwinner,sun20i-d1-de2-mixer-1"; + reg = <0x5200000 0x100000>; + clocks = <&display_clocks CLK_BUS_MIXER1>, + <&display_clocks CLK_MIXER1>; + clock-names = "bus", "mod"; + resets = <&display_clocks RST_MIXER1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mixer1_out: port@1 { + reg = <1>; + + mixer1_out_tcon_top_mixer1: endpoint { + remote-endpoint = <&tcon_top_mixer1_in_mixer1>; + }; + }; + }; + }; + + dsi: dsi@5450000 { + compatible = "allwinner,sun20i-d1-mipi-dsi", + "allwinner,sun50i-a100-mipi-dsi"; + reg = <0x5450000 0x1000>; + interrupts = <SOC_PERIPHERAL_IRQ(92) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_MIPI_DSI>, + <&tcon_top CLK_TCON_TOP_DSI>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_MIPI_DSI>; + phys = <&dphy>; + phy-names = "dphy"; + status = "disabled"; + + port { + dsi_in_tcon_lcd0: endpoint { + remote-endpoint = <&tcon_lcd0_out_dsi>; + }; + }; + }; + + dphy: phy@5451000 { + compatible = "allwinner,sun20i-d1-mipi-dphy", + "allwinner,sun50i-a100-mipi-dphy"; + reg = <0x5451000 0x1000>; + interrupts = <SOC_PERIPHERAL_IRQ(92) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_MIPI_DSI>, + <&ccu CLK_MIPI_DSI>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_MIPI_DSI>; + #phy-cells = <0>; + }; + + tcon_top: tcon-top@5460000 { + compatible = "allwinner,sun20i-d1-tcon-top"; + reg = <0x5460000 0x1000>; + clocks = <&ccu CLK_BUS_DPSS_TOP>, + <&ccu CLK_TCON_TV>, + <&ccu CLK_TVE>, + <&ccu CLK_TCON_LCD0>; + clock-names = "bus", "tcon-tv0", "tve0", "dsi"; + clock-output-names = "tcon-top-tv0", "tcon-top-dsi"; + resets = <&ccu RST_BUS_DPSS_TOP>; + #clock-cells = <1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon_top_mixer0_in: port@0 { + reg = <0>; + + tcon_top_mixer0_in_mixer0: endpoint { + remote-endpoint = <&mixer0_out_tcon_top_mixer0>; + }; + }; + + tcon_top_mixer0_out: port@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + tcon_top_mixer0_out_tcon_lcd0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon_lcd0_in_tcon_top_mixer0>; + }; + + tcon_top_mixer0_out_tcon_tv0: endpoint@2 { + reg = <2>; + remote-endpoint = <&tcon_tv0_in_tcon_top_mixer0>; + }; + }; + + tcon_top_mixer1_in: port@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + tcon_top_mixer1_in_mixer1: endpoint@1 { + reg = <1>; + remote-endpoint = <&mixer1_out_tcon_top_mixer1>; + }; + }; + + tcon_top_mixer1_out: port@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + tcon_top_mixer1_out_tcon_lcd0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon_lcd0_in_tcon_top_mixer1>; + }; + + tcon_top_mixer1_out_tcon_tv0: endpoint@2 { + reg = <2>; + remote-endpoint = <&tcon_tv0_in_tcon_top_mixer1>; + }; + }; + + tcon_top_hdmi_in: port@4 { + reg = <4>; + + tcon_top_hdmi_in_tcon_tv0: endpoint { + remote-endpoint = <&tcon_tv0_out_tcon_top_hdmi>; + }; + }; + + tcon_top_hdmi_out: port@5 { + reg = <5>; + }; + }; + }; + + tcon_lcd0: lcd-controller@5461000 { + compatible = "allwinner,sun20i-d1-tcon-lcd"; + reg = <0x5461000 0x1000>; + interrupts = <SOC_PERIPHERAL_IRQ(90) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_TCON_LCD0>, + <&ccu CLK_TCON_LCD0>; + clock-names = "ahb", "tcon-ch0"; + clock-output-names = "tcon-pixel-clock"; + resets = <&ccu RST_BUS_TCON_LCD0>, + <&ccu RST_BUS_LVDS0>; + reset-names = "lcd", "lvds"; + #clock-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon_lcd0_in: port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + tcon_lcd0_in_tcon_top_mixer0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon_top_mixer0_out_tcon_lcd0>; + }; + + tcon_lcd0_in_tcon_top_mixer1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon_top_mixer1_out_tcon_lcd0>; + }; + }; + + tcon_lcd0_out: port@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + tcon_lcd0_out_dsi: endpoint@1 { + reg = <1>; + remote-endpoint = <&dsi_in_tcon_lcd0>; + }; + }; + }; + }; + + tcon_tv0: lcd-controller@5470000 { + compatible = "allwinner,sun20i-d1-tcon-tv"; + reg = <0x5470000 0x1000>; + interrupts = <SOC_PERIPHERAL_IRQ(91) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_TCON_TV>, + <&tcon_top CLK_TCON_TOP_TV0>; + clock-names = "ahb", "tcon-ch1"; + resets = <&ccu RST_BUS_TCON_TV>; + reset-names = "lcd"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon_tv0_in: port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + tcon_tv0_in_tcon_top_mixer0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon_top_mixer0_out_tcon_tv0>; + }; + + tcon_tv0_in_tcon_top_mixer1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon_top_mixer1_out_tcon_tv0>; + }; + }; + + tcon_tv0_out: port@1 { + reg = <1>; + + tcon_tv0_out_tcon_top_hdmi: endpoint { + remote-endpoint = <&tcon_top_hdmi_in_tcon_tv0>; + }; + }; + }; + }; + + ppu: power-controller@7001000 { + compatible = "allwinner,sun20i-d1-ppu"; + reg = <0x7001000 0x1000>; + clocks = <&r_ccu CLK_BUS_R_PPU>; + resets = <&r_ccu RST_BUS_R_PPU>; + #power-domain-cells = <1>; + }; + + r_ccu: clock-controller@7010000 { + compatible = "allwinner,sun20i-d1-r-ccu"; + reg = <0x7010000 0x400>; + clocks = <&dcxo>, + <&rtc CLK_OSC32K>, + <&rtc CLK_IOSC>, + <&ccu CLK_PLL_PERIPH0_DIV3>; + clock-names = "hosc", "losc", "iosc", "pll-periph"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + rtc: rtc@7090000 { + compatible = "allwinner,sun20i-d1-rtc", + "allwinner,sun50i-r329-rtc"; + reg = <0x7090000 0x400>; + interrupts = <SOC_PERIPHERAL_IRQ(144) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&r_ccu CLK_BUS_R_RTC>, + <&dcxo>, + <&r_ccu CLK_R_AHB>; + clock-names = "bus", "hosc", "ahb"; + #clock-cells = <1>; + }; + }; +}; diff --git a/arch/riscv/include/asm/string.h b/arch/riscv/include/asm/string.h index 7dee3e4c9f6..38ad85fe3bb 100644 --- a/arch/riscv/include/asm/string.h +++ b/arch/riscv/include/asm/string.h @@ -40,4 +40,22 @@ extern void *memmove(void *, const void *, __kernel_size_t); #endif extern void *memset(void *, int, __kernel_size_t); +#undef __HAVE_ARCH_STRLEN +#if CONFIG_IS_ENABLED(USE_ARCH_STRLEN) +#define __HAVE_ARCH_STRLEN +#endif +extern __kernel_size_t strlen(const char *); + +#undef __HAVE_ARCH_STRCMP +#if CONFIG_IS_ENABLED(USE_ARCH_STRCMP) +#define __HAVE_ARCH_STRCMP +#endif +extern int strcmp(const char *, const char *); + +#undef __HAVE_ARCH_STRNCMP +#if CONFIG_IS_ENABLED(USE_ARCH_STRNCMP) +#define __HAVE_ARCH_STRNCMP +#endif +extern int strncmp(const char *, const char *, size_t __kernel_size_t); + #endif /* __ASM_RISCV_STRING_H */ diff --git a/arch/riscv/lib/Makefile b/arch/riscv/lib/Makefile index 02c4d8fcc6c..9a05b662fd6 100644 --- a/arch/riscv/lib/Makefile +++ b/arch/riscv/lib/Makefile @@ -42,5 +42,8 @@ extra-$(CONFIG_EFI) += $(EFI_CRT0) $(EFI_RELOC) obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMSET) += memset.o obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMMOVE) += memmove.o obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMCPY) += memcpy.o +obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_STRLEN) += strlen_zbb.o +obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_STRCMP) += strcmp_zbb.o +obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_STRNCMP) += strncmp_zbb.o obj-$(CONFIG_$(SPL_TPL_)SEMIHOSTING) += semihosting.o diff --git a/arch/riscv/lib/andes_plicsw.c b/arch/riscv/lib/andes_plicsw.c index 75184080890..6fd49e873b1 100644 --- a/arch/riscv/lib/andes_plicsw.c +++ b/arch/riscv/lib/andes_plicsw.c @@ -22,7 +22,7 @@ #include <linux/err.h> /* pending register */ -#define PENDING_REG(base, hart) ((ulong)(base) + 0x1000 + ((hart) / 4) * 4) +#define PENDING_REG(base) ((ulong)(base) + 0x1000) /* enable register */ #define ENABLE_REG(base, hart) ((ulong)(base) + 0x2000 + (hart) * 0x80) /* claim register */ @@ -30,10 +30,11 @@ /* priority register */ #define PRIORITY_REG(base) ((ulong)(base) + PLICSW_PRIORITY_BASE) -#define ENABLE_HART_IPI (0x01010101) -#define SEND_IPI_TO_HART(hart) (0x1 << (hart)) +/* Bit 0 of PLIC-SW pending array is hardwired to zero, so we start from bit 1 */ +#define FIRST_AVAILABLE_BIT 0x2 +#define SEND_IPI_TO_HART(hart) (FIRST_AVAILABLE_BIT << (hart)) #define PLICSW_PRIORITY_BASE 0x4 -#define PLICSW_INTERRUPT_PER_HART 0x8 +#define PLICSW_INTERRUPT_PER_HART 0x1 DECLARE_GLOBAL_DATA_PTR; @@ -41,9 +42,8 @@ static int enable_ipi(int hart) { unsigned int en; - en = ENABLE_HART_IPI << hart; + en = FIRST_AVAILABLE_BIT << hart; writel(en, (void __iomem *)ENABLE_REG(gd->arch.plicsw, hart)); - writel(en, (void __iomem *)ENABLE_REG(gd->arch.plicsw + 0x4, hart)); return 0; } @@ -75,7 +75,7 @@ int riscv_init_ipi(void) ret = uclass_find_first_device(UCLASS_CPU, &dev); if (ret) return ret; - else if (!dev) + if (!dev) return -ENODEV; ofnode_for_each_subnode(node, dev_ofnode(dev->parent)) { @@ -105,10 +105,9 @@ int riscv_init_ipi(void) int riscv_send_ipi(int hart) { - unsigned int ipi = (SEND_IPI_TO_HART(hart) << (8 * gd->arch.boot_hart)); + unsigned int ipi = SEND_IPI_TO_HART(hart); - writel(ipi, (void __iomem *)PENDING_REG(gd->arch.plicsw, - gd->arch.boot_hart)); + writel(ipi, (void __iomem *)PENDING_REG(gd->arch.plicsw)); return 0; } @@ -125,10 +124,9 @@ int riscv_clear_ipi(int hart) int riscv_get_ipi(int hart, int *pending) { - unsigned int ipi = (SEND_IPI_TO_HART(hart) << (8 * gd->arch.boot_hart)); + unsigned int ipi = SEND_IPI_TO_HART(hart); - *pending = readl((void __iomem *)PENDING_REG(gd->arch.plicsw, - gd->arch.boot_hart)); + *pending = readl((void __iomem *)PENDING_REG(gd->arch.plicsw)); *pending = !!(*pending & ipi); return 0; diff --git a/arch/riscv/lib/strcmp_zbb.S b/arch/riscv/lib/strcmp_zbb.S new file mode 100644 index 00000000000..e5a367c0e5c --- /dev/null +++ b/arch/riscv/lib/strcmp_zbb.S @@ -0,0 +1,81 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Taken from Linux arch/riscv/lib/strcmp.S + */ + +#include <linux/linkage.h> +#include <asm/asm.h> + +ENTRY(__strcmp) +WEAK(strcmp) +.option push +.option arch,+zbb + /* + * Returns + * a0 - comparison result, value like strcmp + * + * Parameters + * a0 - string1 + * a1 - string2 + * + * Clobbers + * t0, t1, t2, t3, t4 + */ + + or t2, a0, a1 + li t4, -1 + and t2, t2, SZREG-1 + bnez t2, 3f + + /* Main loop for aligned string. */ + .p2align 3 +1: + REG_L t0, 0(a0) + REG_L t1, 0(a1) + orc.b t3, t0 + bne t3, t4, 2f + addi a0, a0, SZREG + addi a1, a1, SZREG + beq t0, t1, 1b + + /* + * Words don't match, and no null byte in the first + * word. Get bytes in big-endian order and compare. + */ +#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__ + rev8 t0, t0 + rev8 t1, t1 +#endif + + /* Synthesize (t0 >= t1) ? 1 : -1 in a branchless sequence. */ + sltu a0, t0, t1 + neg a0, a0 + ori a0, a0, 1 + ret + +2: + /* + * Found a null byte. + * If words don't match, fall back to simple loop. + */ + bne t0, t1, 3f + + /* Otherwise, strings are equal. */ + li a0, 0 + ret + + /* Simple loop for misaligned strings. */ + .p2align 3 +3: + lbu t0, 0(a0) + lbu t1, 0(a1) + addi a0, a0, 1 + addi a1, a1, 1 + bne t0, t1, 4f + bnez t0, 3b + +4: + sub a0, t0, t1 + ret +.option pop +END(__strcmp) diff --git a/arch/riscv/lib/strlen_zbb.S b/arch/riscv/lib/strlen_zbb.S new file mode 100644 index 00000000000..bd8fa4c0bd0 --- /dev/null +++ b/arch/riscv/lib/strlen_zbb.S @@ -0,0 +1,101 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Taken from Linux arch/riscv/lib/strlen.S + */ + +#include <linux/linkage.h> +#include <asm/asm.h> + +#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__ +# define CZ ctz +# define SHIFT srl +#else +# define CZ clz +# define SHIFT sll +#endif + +ENTRY(__strlen) +WEAK(strlen) +.option push +.option arch,+zbb + /* + * Returns + * a0 - string length + * + * Parameters + * a0 - String to measure + * + * Clobbers + * t0, t1, t2, t3 + */ + + /* Number of irrelevant bytes in the first word. */ + andi t2, a0, SZREG-1 + + /* Align pointer. */ + andi t0, a0, -SZREG + + li t3, SZREG + sub t3, t3, t2 + slli t2, t2, 3 + + /* Get the first word. */ + REG_L t1, 0(t0) + + /* + * Shift away the partial data we loaded to remove the irrelevant bytes + * preceding the string with the effect of adding NUL bytes at the + * end of the string's first word. + */ + SHIFT t1, t1, t2 + + /* Convert non-NUL into 0xff and NUL into 0x00. */ + orc.b t1, t1 + + /* Convert non-NUL into 0x00 and NUL into 0xff. */ + not t1, t1 + + /* + * Search for the first set bit (corresponding to a NUL byte in the + * original chunk). + */ + CZ t1, t1 + + /* + * The first chunk is special: compare against the number + * of valid bytes in this chunk. + */ + srli a0, t1, 3 + bgtu t3, a0, 2f + + /* Prepare for the word comparison loop. */ + addi t2, t0, SZREG + li t3, -1 + + /* + * Our critical loop is 4 instructions and processes data in + * 4 byte or 8 byte chunks. + */ + .p2align 3 +1: + REG_L t1, SZREG(t0) + addi t0, t0, SZREG + orc.b t1, t1 + beq t1, t3, 1b + + not t1, t1 + CZ t1, t1 + srli t1, t1, 3 + + /* Get number of processed bytes. */ + sub t2, t0, t2 + + /* Add number of characters in the first word. */ + add a0, a0, t2 + + /* Add number of characters in the last word. */ + add a0, a0, t1 +2: + ret +.option pop +END(__strlen) diff --git a/arch/riscv/lib/strncmp_zbb.S b/arch/riscv/lib/strncmp_zbb.S new file mode 100644 index 00000000000..00e0fec3a66 --- /dev/null +++ b/arch/riscv/lib/strncmp_zbb.S @@ -0,0 +1,94 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Taken from Linux arch/riscv/lib/strncmp.S + */ + +#include <linux/linkage.h> +#include <asm/asm.h> + +ENTRY(__strncmp) +WEAK(strncmp) +.option push +.option arch,+zbb + /* + * Returns + * a0 - comparison result, like strncmp + * + * Parameters + * a0 - string1 + * a1 - string2 + * a2 - number of characters to compare + * + * Clobbers + * t0, t1, t2, t3, t4, t5, t6 + */ + + or t2, a0, a1 + li t5, -1 + and t2, t2, SZREG-1 + add t4, a0, a2 + bnez t2, 3f + + /* Adjust limit for fast-path. */ + andi t6, t4, -SZREG + + /* Main loop for aligned string. */ + .p2align 3 +1: + bge a0, t6, 3f + REG_L t0, 0(a0) + REG_L t1, 0(a1) + orc.b t3, t0 + bne t3, t5, 2f + orc.b t3, t1 + bne t3, t5, 2f + addi a0, a0, SZREG + addi a1, a1, SZREG + beq t0, t1, 1b + + /* + * Words don't match, and no null byte in the first + * word. Get bytes in big-endian order and compare. + */ +#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__ + rev8 t0, t0 + rev8 t1, t1 +#endif + + /* Synthesize (t0 >= t1) ? 1 : -1 in a branchless sequence. */ + sltu a0, t0, t1 + neg a0, a0 + ori a0, a0, 1 + ret + +2: + /* + * Found a null byte. + * If words don't match, fall back to simple loop. + */ + bne t0, t1, 3f + + /* Otherwise, strings are equal. */ + li a0, 0 + ret + + /* Simple loop for misaligned strings. */ + .p2align 3 +3: + bge a0, t4, 5f + lbu t0, 0(a0) + lbu t1, 0(a1) + addi a0, a0, 1 + addi a1, a1, 1 + bne t0, t1, 4f + bnez t0, 3b + +4: + sub a0, t0, t1 + ret + +5: + li a0, 0 + ret +.option pop +END(__strncmp) |