diff options
Diffstat (limited to 'arch')
78 files changed, 2793 insertions, 77 deletions
diff --git a/arch/Kconfig b/arch/Kconfig index 994fd3b7f86..1ffd77c0f4f 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -166,7 +166,6 @@ config SANDBOX imply CMD_IO imply CMD_IOTRACE imply CMD_LZMADEC - imply CMD_SATA imply CMD_SF imply CMD_SF_TEST imply CRC32_VERIFY diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9a6c2e8101d..2e833940525 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1251,6 +1251,18 @@ config ARCH_VERSAL imply BOARD_LATE_INIT imply ENV_VARS_UBOOT_RUNTIME_CONFIG +config ARCH_VERSAL_NET + bool "Support Xilinx Keystone Platform" + select ARM64 + select CLK + select DM + select DM_ETH if NET + select DM_MMC if MMC + select DM_SERIAL + select OF_CONTROL + imply BOARD_LATE_INIT + imply ENV_VARS_UBOOT_RUNTIME_CONFIG + config ARCH_VF610 bool "Freescale Vybrid" select CPU_V7A @@ -2300,6 +2312,8 @@ source "arch/arm/mach-zynqmp/Kconfig" source "arch/arm/mach-versal/Kconfig" +source "arch/arm/mach-versal-net/Kconfig" + source "arch/arm/mach-zynqmp-r5/Kconfig" source "arch/arm/cpu/armv7/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 1f4a1d57883..ac602aed9c9 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -88,6 +88,7 @@ machine-$(CONFIG_ARCH_OCTEONTX) += octeontx machine-$(CONFIG_ARCH_OCTEONTX2) += octeontx2 machine-$(CONFIG_ARCH_UNIPHIER) += uniphier machine-$(CONFIG_ARCH_VERSAL) += versal +machine-$(CONFIG_ARCH_VERSAL_NET) += versal-net machine-$(CONFIG_ARCH_ZYNQ) += zynq machine-$(CONFIG_ARCH_ZYNQMP) += zynqmp machine-$(CONFIG_ARCH_ZYNQMP_R5) += zynqmp-r5 diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 5a42d5061cd..71e9bd4da33 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -383,6 +383,9 @@ dtb-$(CONFIG_ARCH_VERSAL) += \ versal-mini-emmc0.dtb \ versal-mini-emmc1.dtb \ xilinx-versal-virt.dtb +dtb-$(CONFIG_ARCH_VERSAL_NET) += \ + versal-net-mini.dtb \ + xilinx-versal-net-virt.dtb dtb-$(CONFIG_ARCH_ZYNQMP_R5) += \ zynqmp-r5.dtb dtb-$(CONFIG_AM33XX) += \ @@ -1235,6 +1238,15 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \ mt7622-bananapi-bpi-r64.dtb \ mt7623n-bananapi-bpi-r2.dtb \ mt7629-rfb.dtb \ + mt7981-rfb.dtb \ + mt7981-emmc-rfb.dtb \ + mt7981-sd-rfb.dtb \ + mt7986a-rfb.dtb \ + mt7986b-rfb.dtb \ + mt7986a-sd-rfb.dtb \ + mt7986b-sd-rfb.dtb \ + mt7986a-emmc-rfb.dtb \ + mt7986b-emmc-rfb.dtb \ mt8183-pumpkin.dtb \ mt8512-bm1-emmc.dtb \ mt8516-pumpkin.dtb \ diff --git a/arch/arm/dts/imx8mm-venice-gw7901-u-boot.dtsi b/arch/arm/dts/imx8mm-venice-gw7901-u-boot.dtsi index 11c773bb70d..dc99e7b9ac6 100644 --- a/arch/arm/dts/imx8mm-venice-gw7901-u-boot.dtsi +++ b/arch/arm/dts/imx8mm-venice-gw7901-u-boot.dtsi @@ -129,6 +129,57 @@ phy-reset-post-delay = <1>; }; +&switch { + ports { + #address-cells = <1>; + #size-cells = <0>; + + lan1: port@0 { + phy-handle = <&sw_phy0>; + }; + + lan2: port@1 { + phy-handle = <&sw_phy1>; + }; + + lan3: port@2 { + phy-handle = <&sw_phy2>; + }; + + lan4: port@3 { + phy-handle = <&sw_phy3>; + }; + }; + + mdios { + #address-cells = <1>; + #size-cells = <0>; + + mdio@0 { + reg = <0>; + compatible = "microchip,ksz-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + sw_phy0: ethernet-phy@0 { + reg = <0x0>; + }; + + sw_phy1: ethernet-phy@1 { + reg = <0x1>; + }; + + sw_phy2: ethernet-phy@2 { + reg = <0x2>; + }; + + sw_phy3: ethernet-phy@3 { + reg = <0x3>; + }; + }; + }; +}; + &pinctrl_fec1 { u-boot,dm-spl; }; diff --git a/arch/arm/dts/imx8mp-venice-gw74xx-u-boot.dtsi b/arch/arm/dts/imx8mp-venice-gw74xx-u-boot.dtsi index 920246d577e..caf5d3a7f69 100644 --- a/arch/arm/dts/imx8mp-venice-gw74xx-u-boot.dtsi +++ b/arch/arm/dts/imx8mp-venice-gw74xx-u-boot.dtsi @@ -162,6 +162,65 @@ u-boot,dm-spl; }; +&switch { + ports { + #address-cells = <1>; + #size-cells = <0>; + + lan1: port@0 { + phy-handle = <&sw_phy0>; + }; + + lan2: port@1 { + phy-handle = <&sw_phy1>; + }; + + lan3: port@2 { + phy-handle = <&sw_phy2>; + }; + + lan4: port@3 { + phy-handle = <&sw_phy3>; + }; + + lan5: port@4 { + phy-handle = <&sw_phy4>; + }; + }; + + mdios { + #address-cells = <1>; + #size-cells = <0>; + + mdio@0 { + reg = <0>; + compatible = "microchip,ksz-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + sw_phy0: ethernet-phy@0 { + reg = <0x0>; + }; + + sw_phy1: ethernet-phy@1 { + reg = <0x1>; + }; + + sw_phy2: ethernet-phy@2 { + reg = <0x2>; + }; + + sw_phy3: ethernet-phy@3 { + reg = <0x3>; + }; + + sw_phy4: ethernet-phy@4 { + reg = <0x4>; + }; + }; + }; +}; + &usdhc2 { assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_400M>; assigned-clock-rates = <400000000>; diff --git a/arch/arm/dts/mt7622-rfb.dts b/arch/arm/dts/mt7622-rfb.dts index 30a91374070..b44f19f05a1 100644 --- a/arch/arm/dts/mt7622-rfb.dts +++ b/arch/arm/dts/mt7622-rfb.dts @@ -159,6 +159,14 @@ }; }; + + i2c1_pins_default: i2c1-default { + mux { + function = "i2c"; + groups = "i2c1_0"; + }; + }; + }; &snfi { @@ -242,3 +250,13 @@ &u3phy { status = "okay"; }; + +&soft_i2c { + status = "disabled"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_default>; + status = "okay"; +}; diff --git a/arch/arm/dts/mt7622.dtsi b/arch/arm/dts/mt7622.dtsi index 0127474c95d..2d89fa08b4d 100644 --- a/arch/arm/dts/mt7622.dtsi +++ b/arch/arm/dts/mt7622.dtsi @@ -175,6 +175,7 @@ status = "disabled"; assigned-clocks = <&topckgen CLK_TOP_AXI_SEL>; assigned-clock-parents = <&topckgen CLK_TOP_SYSPLL1_D2>; + mediatek,force-highspeed; }; mmc0: mmc@11230000 { @@ -423,4 +424,28 @@ status = "disabled"; }; + soft_i2c: soft_i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "i2c-gpio"; + gpios = <&gpio 56 GPIO_ACTIVE_HIGH>, /* SDA */ + <&gpio 55 GPIO_ACTIVE_HIGH>; /* CLK */ + i2c-gpio,delay-us = <5>; + status = "disabled"; + }; + + i2c1: i2c@11008000 { + compatible = "mediatek,mt7622-i2c"; + reg = <0x11008000 0x90>, + <0x11000180 0x80>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>; + clock-div = <16>; + clocks = <&pericfg CLK_PERI_I2C1_PD>, + <&pericfg CLK_PERI_AP_DMA_PD>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; diff --git a/arch/arm/dts/mt7981-emmc-rfb.dts b/arch/arm/dts/mt7981-emmc-rfb.dts new file mode 100644 index 00000000000..2b7eae99ce4 --- /dev/null +++ b/arch/arm/dts/mt7981-emmc-rfb.dts @@ -0,0 +1,139 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2022 MediaTek Inc. + * Author: Sam Shih <sam.shih@mediatek.com> + */ + +/dts-v1/; +#include "mt7981.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "mt7981-rfb"; + compatible = "mediatek,mt7981", "mediatek,mt7981-rfb"; + chosen { + stdout-path = &uart0; + tick-timer = &timer0; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "disabled"; +}; + +ð { + status = "okay"; + mediatek,gmac-id = <0>; + phy-mode = "sgmii"; + mediatek,switch = "mt7531"; + reset-gpios = <&gpio 39 GPIO_ACTIVE_HIGH>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&pinctrl { + spic_pins: spi1-pins-func-1 { + mux { + function = "spi"; + groups = "spi1_1"; + }; + }; + + uart1_pins: spi1-pins-func-3 { + mux { + function = "uart"; + groups = "uart1_2"; + }; + }; + + /* pin15 as pwm0 */ + one_pwm_pins: one-pwm-pins { + mux { + function = "pwm"; + groups = "pwm0_1"; + }; + }; + + /* pin15 as pwm0 and pin14 as pwm1 */ + two_pwm_pins: two-pwm-pins { + mux { + function = "pwm"; + groups = "pwm0_1", "pwm1_0"; + }; + }; + + /* pin15 as pwm0, pin14 as pwm1, pin7 as pwm2 */ + three_pwm_pins: three-pwm-pins { + mux { + function = "pwm"; + groups = "pwm0_1", "pwm1_0", "pwm2"; + }; + }; + + mmc0_pins_default: mmc0default { + mux { + function = "flash"; + groups = "emmc_45"; + }; + conf-cmd-dat { + pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO", + "SPI0_CS", "SPI0_HOLD", "SPI0_WP", + "SPI1_CLK", "SPI1_MOSI", "SPI1_MISO"; + input-enable; + drive-strength = <MTK_DRIVE_4mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + conf-clk { + pins = "SPI1_CS"; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + conf-rst { + pins = "PWM0"; + drive-strength = <MTK_DRIVE_4mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&two_pwm_pins>; + status = "okay"; +}; + +&watchdog { + status = "disabled"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_default>; + bus-width = <8>; + max-frequency = <52000000>; + cap-mmc-highspeed; + cap-mmc-hw-reset; + vmmc-supply = <®_3p3v>; + non-removable; + status = "okay"; +}; diff --git a/arch/arm/dts/mt7981-rfb.dts b/arch/arm/dts/mt7981-rfb.dts new file mode 100644 index 00000000000..5559ace9538 --- /dev/null +++ b/arch/arm/dts/mt7981-rfb.dts @@ -0,0 +1,173 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2022 MediaTek Inc. + * Author: Sam Shih <sam.shih@mediatek.com> + */ + +/dts-v1/; +#include "mt7981.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "mt7981-rfb"; + compatible = "mediatek,mt7981", "mediatek,mt7981-rfb"; + chosen { + stdout-path = &uart0; + tick-timer = &timer0; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "disabled"; +}; + +ð { + status = "okay"; + mediatek,gmac-id = <0>; + phy-mode = "sgmii"; + mediatek,switch = "mt7531"; + reset-gpios = <&gpio 39 GPIO_ACTIVE_HIGH>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&pinctrl { + spi_flash_pins: spi0-pins-func-1 { + mux { + function = "flash"; + groups = "spi0", "spi0_wp_hold"; + }; + + conf-pu { + pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP"; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_11>; + }; + + conf-pd { + pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO"; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_11>; + }; + }; + + spi2_flash_pins: spi2-spi2-pins { + mux { + function = "spi"; + groups = "spi2", "spi2_wp_hold"; + }; + + conf-pu { + pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP"; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_00>; + }; + + conf-pd { + pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO"; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_00>; + }; + }; + + spic_pins: spi1-pins-func-1 { + mux { + function = "spi"; + groups = "spi1_1"; + }; + }; + + uart1_pins: spi1-pins-func-3 { + mux { + function = "uart"; + groups = "uart1_2"; + }; + }; + + /* pin15 as pwm0 */ + one_pwm_pins: one-pwm-pins { + mux { + function = "pwm"; + groups = "pwm0_1"; + }; + }; + + /* pin15 as pwm0 and pin14 as pwm1 */ + two_pwm_pins: two-pwm-pins { + mux { + function = "pwm"; + groups = "pwm0_1", "pwm1_0"; + }; + }; + + /* pin15 as pwm0, pin14 as pwm1, pin7 as pwm2 */ + three_pwm_pins: three-pwm-pins { + mux { + function = "pwm"; + groups = "pwm0_1", "pwm1_0", "pwm2"; + }; + }; +}; + +&spi0 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi_flash_pins>; + status = "okay"; + must_tx; + enhance_timing; + dma_ext; + ipm_design; + support_quad; + tick_dly = <2>; + sample_sel = <0>; + + spi_nand@0 { + compatible = "spi-nand"; + reg = <0>; + spi-max-frequency = <52000000>; + }; +}; + +&spi2 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_flash_pins>; + status = "okay"; + must_tx; + enhance_timing; + dma_ext; + ipm_design; + support_quad; + tick_dly = <2>; + sample_sel = <0>; + + spi_nor@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <52000000>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&two_pwm_pins>; + status = "okay"; +}; + +&watchdog { + status = "disabled"; +}; diff --git a/arch/arm/dts/mt7981-sd-rfb.dts b/arch/arm/dts/mt7981-sd-rfb.dts new file mode 100644 index 00000000000..34ac227ecf4 --- /dev/null +++ b/arch/arm/dts/mt7981-sd-rfb.dts @@ -0,0 +1,139 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2022 MediaTek Inc. + * Author: Sam Shih <sam.shih@mediatek.com> + */ + +/dts-v1/; +#include "mt7981.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "mt7981-rfb"; + compatible = "mediatek,mt7981", "mediatek,mt7981-sd-rfb"; + chosen { + stdout-path = &uart0; + tick-timer = &timer0; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "disabled"; +}; + +ð { + status = "okay"; + mediatek,gmac-id = <0>; + phy-mode = "sgmii"; + mediatek,switch = "mt7531"; + reset-gpios = <&gpio 39 GPIO_ACTIVE_HIGH>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&pinctrl { + spic_pins: spi1-pins-func-1 { + mux { + function = "spi"; + groups = "spi1_1"; + }; + }; + + uart1_pins: spi1-pins-func-3 { + mux { + function = "uart"; + groups = "uart1_2"; + }; + }; + + /* pin15 as pwm0 */ + one_pwm_pins: one-pwm-pins { + mux { + function = "pwm"; + groups = "pwm0_1"; + }; + }; + + /* pin15 as pwm0 and pin14 as pwm1 */ + two_pwm_pins: two-pwm-pins { + mux { + function = "pwm"; + groups = "pwm0_1", "pwm1_0"; + }; + }; + + /* pin15 as pwm0, pin14 as pwm1, pin7 as pwm2 */ + three_pwm_pins: three-pwm-pins { + mux { + function = "pwm"; + groups = "pwm0_1", "pwm1_0", "pwm2"; + }; + }; + + mmc0_pins_default: mmc0default { + mux { + function = "flash"; + groups = "emmc_45"; + }; + conf-cmd-dat { + pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO", + "SPI0_CS", "SPI0_HOLD", "SPI0_WP", + "SPI1_CLK", "SPI1_MOSI", "SPI1_MISO"; + input-enable; + drive-strength = <MTK_DRIVE_4mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + conf-clk { + pins = "SPI1_CS"; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + conf-rst { + pins = "PWM0"; + drive-strength = <MTK_DRIVE_4mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&two_pwm_pins>; + status = "okay"; +}; + +&watchdog { + status = "disabled"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_default>; + bus-width = <4>; + max-frequency = <52000000>; + cap-sd-highspeed; + r_smpl = <0>; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_3p3v>; + status = "okay"; +}; diff --git a/arch/arm/dts/mt7981.dtsi b/arch/arm/dts/mt7981.dtsi new file mode 100644 index 00000000000..3089371805c --- /dev/null +++ b/arch/arm/dts/mt7981.dtsi @@ -0,0 +1,295 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2022 MediaTek Inc. + * Author: Sam Shih <sam.shih@mediatek.com> + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/mt7981-clk.h> +#include <dt-bindings/reset/mt7629-reset.h> +#include <dt-bindings/pinctrl/mt65xx.h> + +/ { + compatible = "mediatek,mt7981"; + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + mediatek,hwver = <&hwver>; + }; + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1>; + mediatek,hwver = <&hwver>; + }; + }; + + gpt_clk: gpt_dummy20m { + compatible = "fixed-clock"; + clock-frequency = <13000000>; + #clock-cells = <0>; + u-boot,dm-pre-reloc; + }; + + hwver: hwver { + compatible = "mediatek,hwver", "syscon"; + reg = <0x8000000 0x1000>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&gic>; + clock-frequency = <13000000>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + arm,cpu-registers-not-fw-configured; + }; + + timer0: timer@10008000 { + compatible = "mediatek,mt7986-timer"; + reg = <0x10008000 0x1000>; + interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gpt_clk>; + clock-names = "gpt-clk"; + u-boot,dm-pre-reloc; + }; + + watchdog: watchdog@1001c000 { + compatible = "mediatek,mt7986-wdt"; + reg = <0x1001c000 0x1000>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + #reset-cells = <1>; + status = "disabled"; + }; + + gic: interrupt-controller@c000000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + interrupt-controller; + reg = <0x0c000000 0x40000>, /* GICD */ + <0x0c080000 0x200000>; /* GICR */ + + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + fixed_plls: apmixedsys@1001e000 { + compatible = "mediatek,mt7981-fixed-plls"; + reg = <0x1001e000 0x1000>; + #clock-cells = <1>; + u-boot,dm-pre-reloc; + }; + + topckgen: topckgen@1001b000 { + compatible = "mediatek,mt7981-topckgen"; + reg = <0x1001b000 0x1000>; + clock-parent = <&fixed_plls>; + #clock-cells = <1>; + u-boot,dm-pre-reloc; + }; + + infracfg_ao: infracfg_ao@10001000 { + compatible = "mediatek,mt7981-infracfg_ao"; + reg = <0x10001000 0x80>; + clock-parent = <&infracfg>; + #clock-cells = <1>; + u-boot,dm-pre-reloc; + }; + + infracfg: infracfg@10001000 { + compatible = "mediatek,mt7981-infracfg"; + reg = <0x10001000 0x30>; + clock-parent = <&topckgen>; + #clock-cells = <1>; + u-boot,dm-pre-reloc; + }; + + pinctrl: pinctrl@11d00000 { + compatible = "mediatek,mt7981-pinctrl"; + reg = <0x11d00000 0x1000>, + <0x11c00000 0x1000>, + <0x11c10000 0x1000>, + <0x11d20000 0x1000>, + <0x11e00000 0x1000>, + <0x11e20000 0x1000>, + <0x11f00000 0x1000>, + <0x11f10000 0x1000>, + <0x1000b000 0x1000>; + reg-names = "gpio_base", "iocfg_rt_base", "iocfg_rm_base", + "iocfg_rb_base", "iocfg_lb_base", "iocfg_bl_base", + "iocfg_tm_base", "iocfg_tl_base", "eint"; + gpio: gpio-controller { + gpio-controller; + #gpio-cells = <2>; + }; + }; + + pwm: pwm@10048000 { + compatible = "mediatek,mt7981-pwm"; + reg = <0x10048000 0x1000>; + #clock-cells = <1>; + #pwm-cells = <2>; + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&infracfg CK_INFRA_PWM>, + <&infracfg_ao CK_INFRA_PWM_BSEL>, + <&infracfg_ao CK_INFRA_PWM1_CK>, + <&infracfg_ao CK_INFRA_PWM2_CK>, + /* FIXME */ + <&infracfg_ao CK_INFRA_PWM2_CK>; + assigned-clocks = <&topckgen CK_TOP_PWM_SEL>; + assigned-clock-parents = <&topckgen CK_TOP_CB_CKSQ_40M>; + clock-names = "top", "main", "pwm1", "pwm2", "pwm3"; + status = "disabled"; + }; + + uart0: serial@11002000 { + compatible = "mediatek,hsuart"; + reg = <0x11002000 0x400>; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&infracfg_ao CK_INFRA_UART0_CK>; + assigned-clocks = <&topckgen CK_TOP_UART_SEL>, + <&infracfg_ao CK_INFRA_UART0_SEL>; + assigned-clock-parents = <&topckgen CK_TOP_CB_CKSQ_40M>, + <&infracfg CK_INFRA_UART>; + mediatek,force-highspeed; + status = "disabled"; + u-boot,dm-pre-reloc; + }; + + uart1: serial@11003000 { + compatible = "mediatek,hsuart"; + reg = <0x11003000 0x400>; + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&infracfg_ao CK_INFRA_UART1_CK>; + assigned-clocks = <&topckgen CK_TOP_UART_SEL>, + <&infracfg_ao CK_INFRA_UART1_SEL>; + assigned-clock-parents = <&topckgen CK_TOP_CB_CKSQ_40M>, + <&infracfg CK_INFRA_UART>; + mediatek,force-highspeed; + status = "disabled"; + }; + + uart2: serial@11004000 { + compatible = "mediatek,hsuart"; + reg = <0x11004000 0x400>; + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&infracfg_ao CK_INFRA_UART2_CK>; + assigned-clocks = <&topckgen CK_TOP_UART_SEL>, + <&infracfg_ao CK_INFRA_UART2_SEL>; + assigned-clock-parents = <&topckgen CK_TOP_CB_CKSQ_40M>, + <&infracfg CK_INFRA_UART>; + mediatek,force-highspeed; + status = "disabled"; + }; + + snand: snand@11005000 { + compatible = "mediatek,mt7986-snand"; + reg = <0x11005000 0x1000>, + <0x11006000 0x1000>; + reg-names = "nfi", "ecc"; + clocks = <&infracfg_ao CK_INFRA_SPINFI1_CK>, + <&infracfg_ao CK_INFRA_NFI1_CK>, + <&infracfg_ao CK_INFRA_NFI_HCK_CK>; + clock-names = "pad_clk", "nfi_clk", "nfi_hclk"; + assigned-clocks = <&topckgen CK_TOP_SPINFI_SEL>, + <&topckgen CK_TOP_NFI1X_SEL>; + assigned-clock-parents = <&topckgen CK_TOP_CB_M_D8>, + <&topckgen CK_TOP_CB_M_D8>; + status = "disabled"; + }; + + ethsys: syscon@15000000 { + compatible = "mediatek,mt7981-ethsys", "syscon"; + reg = <0x15000000 0x1000>; + clock-parent = <&topckgen>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + eth: ethernet@15100000 { + compatible = "mediatek,mt7981-eth", "syscon"; + reg = <0x15100000 0x20000>; + resets = <ðsys ETHSYS_FE_RST>; + reset-names = "fe"; + mediatek,ethsys = <ðsys>; + mediatek,sgmiisys = <&sgmiisys0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + sgmiisys0: syscon@10060000 { + compatible = "mediatek,mt7986-sgmiisys", "syscon"; + reg = <0x10060000 0x1000>; + pn_swap; + #clock-cells = <1>; + }; + + sgmiisys1: syscon@10070000 { + compatible = "mediatek,mt7986-sgmiisys", "syscon"; + reg = <0x10070000 0x1000>; + #clock-cells = <1>; + }; + + spi0: spi@1100a000 { + compatible = "mediatek,ipm-spi"; + reg = <0x1100a000 0x100>; + clocks = <&infracfg_ao CK_INFRA_SPI0_CK>, + <&topckgen CK_TOP_SPI_SEL>; + assigned-clocks = <&topckgen CK_TOP_SPI_SEL>, + <&infracfg CK_INFRA_SPI0_SEL>; + assigned-clock-parents = <&topckgen CK_TOP_CB_M_D2>, + <&topckgen CK_INFRA_ISPI0>; + clock-names = "sel-clk", "spi-clk"; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + spi1: spi@1100b000 { + compatible = "mediatek,ipm-spi"; + reg = <0x1100b000 0x100>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + spi2: spi@11009000 { + compatible = "mediatek,ipm-spi"; + reg = <0x11009000 0x100>; + clocks = <&infracfg_ao CK_INFRA_SPI0_CK>, + <&topckgen CK_TOP_SPI_SEL>; + assigned-clocks = <&topckgen CK_TOP_SPI_SEL>, + <&infracfg CK_INFRA_SPI0_SEL>; + assigned-clock-parents = <&topckgen CK_TOP_CB_M_D2>, + <&topckgen CK_INFRA_ISPI0>; + clock-names = "sel-clk", "spi-clk"; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + mmc0: mmc@11230000 { + compatible = "mediatek,mt7981-mmc"; + reg = <0x11230000 0x1000>, + <0x11C20000 0x1000>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&topckgen CK_TOP_EMMC_400M>, + <&topckgen CK_TOP_EMMC_208M>, + <&infracfg_ao CK_INFRA_MSDC_CK>; + assigned-clocks = <&topckgen CK_TOP_EMMC_400M_SEL>, + <&topckgen CK_TOP_EMMC_208M_SEL>; + assigned-clock-parents = <&topckgen CK_TOP_CB_NET2_D2>, + <&topckgen CK_TOP_CB_M_D2>; + clock-names = "source", "hclk", "source_cg"; + status = "disabled"; + }; + +}; diff --git a/arch/arm/dts/mt7986-u-boot.dtsi b/arch/arm/dts/mt7986-u-boot.dtsi new file mode 100644 index 00000000000..95671f8afae --- /dev/null +++ b/arch/arm/dts/mt7986-u-boot.dtsi @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2022 MediaTek Inc. + * Author: Sam Shih <sam.shih@mediatek.com> + */ + +&topckgen { + u-boot,dm-pre-reloc; +}; + +&pericfg { + u-boot,dm-pre-reloc; +}; + +&apmixedsys { + u-boot,dm-pre-reloc; +}; + +&timer0 { + u-boot,dm-pre-reloc; +}; + +&uart0 { + u-boot,dm-pre-reloc; +}; + +&snand { + u-boot,dm-pre-reloc; +}; + +&pinctrl { + u-boot,dm-pre-reloc; +}; diff --git a/arch/arm/dts/mt7986.dtsi b/arch/arm/dts/mt7986.dtsi new file mode 100644 index 00000000000..794ab1f4bd6 --- /dev/null +++ b/arch/arm/dts/mt7986.dtsi @@ -0,0 +1,350 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2022 MediaTek Inc. + * Author: Sam Shih <sam.shih@mediatek.com> + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/phy/phy.h> +#include <dt-bindings/clock/mt7986-clk.h> +#include <dt-bindings/reset/mt7629-reset.h> +#include <dt-bindings/pinctrl/mt65xx.h> + +/ { + compatible = "mediatek,mt7986"; + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + config { + u-boot,mmc-env-partition = "u-boot-env"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + mediatek,hwver = <&hwver>; + }; + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1>; + mediatek,hwver = <&hwver>; + }; + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x2>; + mediatek,hwver = <&hwver>; + }; + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x3>; + mediatek,hwver = <&hwver>; + }; + }; + + dummy_clk: dummy12m { + compatible = "fixed-clock"; + clock-frequency = <12000000>; + #clock-cells = <0>; + /* must need this line, or uart uanable to get dummy_clk */ + u-boot,dm-pre-reloc; + }; + + hwver: hwver { + compatible = "mediatek,hwver", "syscon"; + reg = <0x8000000 0x1000>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&gic>; + clock-frequency = <13000000>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + arm,cpu-registers-not-fw-configured; + }; + + timer0: timer@10008000 { + compatible = "mediatek,mt7986-timer"; + reg = <0x10008000 0x1000>; + interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&infracfg CK_INFRA_CK_F26M>; + clock-names = "gpt-clk"; + u-boot,dm-pre-reloc; + }; + + watchdog: watchdog@1001c000 { + compatible = "mediatek,mt7986-wdt"; + reg = <0x1001c000 0x1000>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + #reset-cells = <1>; + status = "disabled"; + }; + + gic: interrupt-controller@c000000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + interrupt-controller; + reg = <0x0c000000 0x40000>, /* GICD */ + <0x0c080000 0x200000>; /* GICR */ + + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + fixed_plls: apmixedsys@1001E000 { + compatible = "mediatek,mt7986-fixed-plls"; + reg = <0x1001E000 0x1000>; + #clock-cells = <1>; + }; + + topckgen: topckgen@1001B000 { + compatible = "mediatek,mt7986-topckgen"; + reg = <0x1001B000 0x1000>; + clock-parent = <&fixed_plls>; + #clock-cells = <1>; + }; + + infracfg_ao: infracfg_ao@10001000 { + compatible = "mediatek,mt7986-infracfg_ao"; + reg = <0x10001000 0x68>; + clock-parent = <&infracfg>; + #clock-cells = <1>; + }; + + infracfg: infracfg@10001040 { + compatible = "mediatek,mt7986-infracfg"; + reg = <0x10001000 0x1000>; + clock-parent = <&topckgen>; + #clock-cells = <1>; + }; + + pinctrl: pinctrl@1001f000 { + compatible = "mediatek,mt7986-pinctrl"; + reg = <0x1001f000 0x1000>, + <0x11c30000 0x1000>, + <0x11c40000 0x1000>, + <0x11e20000 0x1000>, + <0x11e30000 0x1000>, + <0x11f00000 0x1000>, + <0x11f10000 0x1000>, + <0x1000b000 0x1000>; + reg-names = "gpio_base", "iocfg_rt_base", "iocfg_rb_base", + "iocfg_lt_base", "iocfg_lb_base", "iocfg_tr_base", + "iocfg_tl_base", "eint"; + gpio: gpio-controller { + gpio-controller; + #gpio-cells = <2>; + }; + }; + + pwm: pwm@10048000 { + compatible = "mediatek,mt7986-pwm"; + reg = <0x10048000 0x1000>; + #clock-cells = <1>; + #pwm-cells = <2>; + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&infracfg CK_INFRA_PWM>, + <&infracfg_ao CK_INFRA_PWM_BSEL>, + <&infracfg_ao CK_INFRA_PWM1_CK>, + <&infracfg_ao CK_INFRA_PWM2_CK>; + assigned-clocks = <&topckgen CK_TOP_PWM_SEL>, + <&infracfg CK_INFRA_PWM_BSEL>, + <&infracfg CK_INFRA_PWM1_SEL>, + <&infracfg CK_INFRA_PWM2_SEL>; + assigned-clock-parents = <&topckgen CK_TOP_CB_M_D4>, + <&infracfg CK_INFRA_PWM>, + <&infracfg CK_INFRA_PWM>, + <&infracfg CK_INFRA_PWM>; + clock-names = "top", "main", "pwm1", "pwm2"; + status = "disabled"; + u-boot,dm-pre-reloc; + }; + + uart0: serial@11002000 { + compatible = "mediatek,hsuart"; + reg = <0x11002000 0x400>; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&infracfg_ao CK_INFRA_UART0_CK>; + assigned-clocks = <&topckgen CK_TOP_UART_SEL>, + <&infracfg_ao CK_INFRA_UART0_SEL>; + assigned-clock-parents = <&topckgen CK_TOP_CB_CKSQ_40M>, + <&infracfg CK_INFRA_UART>; + mediatek,force-highspeed; + status = "disabled"; + u-boot,dm-pre-reloc; + }; + + uart1: serial@11003000 { + compatible = "mediatek,hsuart"; + reg = <0x11003000 0x400>; + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&infracfg_ao CK_INFRA_UART1_CK>; + assigned-clocks = <&infracfg CK_INFRA_UART1_SEL>; + assigned-clock-parents = <&infracfg CK_INFRA_CK_F26M>; + mediatek,force-highspeed; + status = "disabled"; + }; + + uart2: serial@11004000 { + compatible = "mediatek,hsuart"; + reg = <0x11004000 0x400>; + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&infracfg_ao CK_INFRA_UART2_CK>; + assigned-clocks = <&infracfg CK_INFRA_UART2_SEL>; + assigned-clock-parents = <&infracfg CK_INFRA_CK_F26M>; + mediatek,force-highspeed; + status = "disabled"; + }; + + snand: snand@11005000 { + compatible = "mediatek,mt7986-snand"; + reg = <0x11005000 0x1000>, + <0x11006000 0x1000>; + reg-names = "nfi", "ecc"; + clocks = <&infracfg_ao CK_INFRA_SPINFI1_CK>, + <&infracfg_ao CK_INFRA_NFI1_CK>, + <&infracfg_ao CK_INFRA_NFI_HCK_CK>; + clock-names = "pad_clk", "nfi_clk", "nfi_hclk"; + assigned-clocks = <&topckgen CK_TOP_SPINFI_SEL>, + <&topckgen CK_TOP_NFI1X_SEL>; + assigned-clock-parents = <&topckgen CK_TOP_CB_M_D8>, + <&topckgen CK_TOP_CB_M_D8>; + status = "disabled"; + }; + + ethsys: syscon@15000000 { + compatible = "mediatek,mt7986-ethsys", "syscon"; + reg = <0x15000000 0x1000>; + clock-parent = <&topckgen>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + eth: ethernet@15100000 { + compatible = "mediatek,mt7986-eth", "syscon"; + reg = <0x15100000 0x20000>; + resets = <ðsys ETHSYS_FE_RST>; + reset-names = "fe"; + mediatek,ethsys = <ðsys>; + mediatek,sgmiisys = <&sgmiisys0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + sgmiisys0: syscon@10060000 { + compatible = "mediatek,mt7986-sgmiisys", "syscon"; + reg = <0x10060000 0x1000>; + #clock-cells = <1>; + }; + + sgmiisys1: syscon@10070000 { + compatible = "mediatek,mt7986-sgmiisys", "syscon"; + reg = <0x10070000 0x1000>; + #clock-cells = <1>; + }; + + spi0: spi@1100a000 { + compatible = "mediatek,ipm-spi"; + reg = <0x1100a000 0x100>; + clocks = <&infracfg_ao CK_INFRA_SPI0_CK>, + <&topckgen CK_TOP_SPI_SEL>; + assigned-clocks = <&topckgen CK_TOP_SPI_SEL>, + <&infracfg CK_INFRA_SPI0_SEL>; + assigned-clock-parents = <&topckgen CK_TOP_CB_M_D2>, + <&topckgen CK_INFRA_ISPI0>; + clock-names = "sel-clk", "spi-clk"; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + spi1: spi@1100b000 { + compatible = "mediatek,ipm-spi"; + reg = <0x1100b000 0x100>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + mmc0: mmc@11230000 { + compatible = "mediatek,mt7986-mmc"; + reg = <0x11230000 0x1000>, + <0x11C20000 0x1000>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&topckgen CK_TOP_EMMC_416M>, + <&topckgen CK_TOP_EMMC_250M>, + <&infracfg_ao CK_INFRA_MSDC_CK>; + assigned-clocks = <&topckgen CK_TOP_EMMC_416M_SEL>, + <&topckgen CK_TOP_EMMC_250M_SEL>; + assigned-clock-parents = <&topckgen CK_TOP_CB_M_416M>, + <&topckgen CK_TOP_NET1_D5_D2>; + clock-names = "source", "hclk", "source_cg"; + status = "disabled"; + }; + + xhci: xhci@11200000 { + compatible = "mediatek,mt7986-xhci", + "mediatek,mtk-xhci"; + reg = <0x11200000 0x2e00>, + <0x11203e00 0x0100>; + reg-names = "mac", "ippc"; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + phys = <&u2port0 PHY_TYPE_USB2>, + <&u3port0 PHY_TYPE_USB3>, + <&u2port1 PHY_TYPE_USB2>; + clocks = <&dummy_clk>, + <&dummy_clk>, + <&dummy_clk>, + <&dummy_clk>, + <&dummy_clk>; + clock-names = "sys_ck", + "xhci_ck", + "ref_ck", + "mcu_ck", + "dma_ck"; + tpl-support; + status = "okay"; + }; + + usbtphy: usb-phy@11e10000 { + compatible = "mediatek,mt7986", + "mediatek,generic-tphy-v2"; + #address-cells = <1>; + #size-cells = <1>; + status = "okay"; + + u2port0: usb-phy@11e10000 { + reg = <0x11e10000 0x700>; + clocks = <&dummy_clk>; + clock-names = "ref"; + #phy-cells = <1>; + status = "okay"; + }; + + u3port0: usb-phy@11e10700 { + reg = <0x11e10700 0x900>; + clocks = <&dummy_clk>; + clock-names = "ref"; + #phy-cells = <1>; + status = "okay"; + }; + + u2port1: usb-phy@11e11000 { + reg = <0x11e11000 0x700>; + clocks = <&dummy_clk>; + clock-names = "ref"; + #phy-cells = <1>; + status = "okay"; + }; + }; +}; diff --git a/arch/arm/dts/mt7986a-emmc-rfb.dts b/arch/arm/dts/mt7986a-emmc-rfb.dts new file mode 100644 index 00000000000..315bdd0b148 --- /dev/null +++ b/arch/arm/dts/mt7986a-emmc-rfb.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2022 MediaTek Inc. + * Author: Sam Shih <sam.shih@mediatek.com> + */ + +/dts-v1/; +#include "mt7986a-rfb.dts" + +/ { + compatible = "mediatek,mt7986", "mediatek,mt7986-rfb", + "mediatek,mt7986-emmc-rfb"; + bl2_verify { + bl2_compatible = "emmc"; + }; +}; diff --git a/arch/arm/dts/mt7986a-rfb.dts b/arch/arm/dts/mt7986a-rfb.dts new file mode 100644 index 00000000000..80def57e1a1 --- /dev/null +++ b/arch/arm/dts/mt7986a-rfb.dts @@ -0,0 +1,218 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2022 MediaTek Inc. + * Author: Sam Shih <sam.shih@mediatek.com> + */ + +/dts-v1/; +#include "mt7986.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "mt7986-rfb"; + compatible = "mediatek,mt7986", "mediatek,mt7986-rfb"; + chosen { + stdout-path = &uart0; + tick-timer = &timer0; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "disabled"; +}; + +ð { + status = "okay"; + mediatek,gmac-id = <0>; + phy-mode = "sgmii"; + mediatek,switch = "mt7531"; + reset-gpios = <&gpio 5 GPIO_ACTIVE_HIGH>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&pinctrl { + spi_flash_pins: spi0-pins-func-1 { + mux { + function = "flash"; + groups = "spi0", "spi0_wp_hold"; + }; + + conf-pu { + pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP"; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_11>; + }; + + conf-pd { + pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO"; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_11>; + }; + }; + + snfi_pins: snfi-pins-func-1 { + mux { + function = "flash"; + groups = "snfi"; + }; + + clk { + pins = "SPI0_CLK"; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_00>; + }; + + conf-pu { + pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP"; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_00>; + }; + + conf-pd { + pins = "SPI0_MOSI", "SPI0_MISO"; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_00>; + }; + }; + + spic_pins: spi1-pins-func-1 { + mux { + function = "spi"; + groups = "spi1_2"; + }; + }; + + uart1_pins: spi1-pins-func-3 { + mux { + function = "uart"; + groups = "uart1_2"; + }; + }; + + pwm_pins: pwm0-pins-func-1 { + mux { + function = "pwm"; + groups = "pwm0"; + }; + }; + + mmc0_pins_default: mmc0default { + mux { + function = "flash"; + groups = "emmc_51"; + }; + + conf-cmd-dat { + pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2", + "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5", + "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD"; + input-enable; + drive-strength = <MTK_DRIVE_4mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + conf-clk { + pins = "EMMC_CK"; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + conf-dsl { + pins = "EMMC_DSL"; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + conf-rst { + pins = "EMMC_RSTB"; + drive-strength = <MTK_DRIVE_4mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; +}; + +&snand { + pinctrl-names = "default"; + pinctrl-0 = <&snfi_pins>; + status = "okay"; + quad-spi; +}; + +&spi0 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi_flash_pins>; + status = "okay"; + must_tx; + enhance_timing; + dma_ext; + ipm_design; + support_quad; + tick_dly = <2>; + sample_sel = <0>; + + spi_nor@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <52000000>; + }; + + spi_nand@1 { + compatible = "spi-nand"; + reg = <1>; + spi-max-frequency = <52000000>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_pins>; + status = "okay"; +}; + +&watchdog { + status = "disabled"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_default>; + bus-width = <8>; + max-frequency = <52000000>; + cap-mmc-highspeed; + cap-mmc-hw-reset; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + non-removable; + status = "okay"; +}; diff --git a/arch/arm/dts/mt7986a-sd-rfb.dts b/arch/arm/dts/mt7986a-sd-rfb.dts new file mode 100644 index 00000000000..5807c5d5ccb --- /dev/null +++ b/arch/arm/dts/mt7986a-sd-rfb.dts @@ -0,0 +1,177 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2022 MediaTek Inc. + * Author: Sam Shih <sam.shih@mediatek.com> + */ + +/dts-v1/; +#include "mt7986.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "mt7986-rfb"; + compatible = "mediatek,mt7986", "mediatek,mt7986-rfb", + "mediatek,mt7986-sd-rfb"; + chosen { + stdout-path = &uart0; + tick-timer = &timer0; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "disabled"; +}; + +ð { + status = "okay"; + mediatek,gmac-id = <0>; + phy-mode = "sgmii"; + mediatek,switch = "mt7531"; + reset-gpios = <&gpio 5 GPIO_ACTIVE_HIGH>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&pinctrl { + spi_flash_pins: spi0-pins-func-1 { + mux { + function = "flash"; + groups = "spi0", "spi0_wp_hold"; + }; + + conf-pu { + pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP"; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_11>; + }; + + conf-pd { + pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO"; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_11>; + }; + }; + + spic_pins: spi1-pins-func-1 { + mux { + function = "spi"; + groups = "spi1_2"; + }; + }; + + uart1_pins: spi1-pins-func-3 { + mux { + function = "uart"; + groups = "uart1_2"; + }; + }; + + pwm_pins: pwm0-pins-func-1 { + mux { + function = "pwm"; + groups = "pwm0"; + }; + }; + + mmc0_pins_default: mmc0default { + mux { + function = "flash"; + groups = "emmc_51"; + }; + + conf-cmd-dat { + pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2", + "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5", + "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD"; + input-enable; + drive-strength = <MTK_DRIVE_4mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + conf-clk { + pins = "EMMC_CK"; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + conf-dsl { + pins = "EMMC_DSL"; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + conf-rst { + pins = "EMMC_RSTB"; + drive-strength = <MTK_DRIVE_4mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; +}; + +&spi0 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi_flash_pins>; + status = "okay"; + must_tx; + enhance_timing; + dma_ext; + ipm_design; + support_quad; + tick_dly = <2>; + sample_sel = <0>; + + spi_nor@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <52000000>; + }; + + spi_nand@1 { + compatible = "spi-nand"; + reg = <1>; + spi-max-frequency = <52000000>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_pins>; + status = "okay"; +}; + +&watchdog { + status = "disabled"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_default>; + bus-width = <4>; + max-frequency = <52000000>; + cap-sd-highspeed; + r_smpl = <1>; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_3p3v>; + status = "okay"; +}; diff --git a/arch/arm/dts/mt7986b-emmc-rfb.dts b/arch/arm/dts/mt7986b-emmc-rfb.dts new file mode 100644 index 00000000000..315bdd0b148 --- /dev/null +++ b/arch/arm/dts/mt7986b-emmc-rfb.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2022 MediaTek Inc. + * Author: Sam Shih <sam.shih@mediatek.com> + */ + +/dts-v1/; +#include "mt7986a-rfb.dts" + +/ { + compatible = "mediatek,mt7986", "mediatek,mt7986-rfb", + "mediatek,mt7986-emmc-rfb"; + bl2_verify { + bl2_compatible = "emmc"; + }; +}; diff --git a/arch/arm/dts/mt7986b-rfb.dts b/arch/arm/dts/mt7986b-rfb.dts new file mode 100644 index 00000000000..0c4e3e878fa --- /dev/null +++ b/arch/arm/dts/mt7986b-rfb.dts @@ -0,0 +1,204 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2022 MediaTek Inc. + * Author: Sam Shih <sam.shih@mediatek.com> + */ + +/dts-v1/; +#include "mt7986.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "mt7986-rfb"; + compatible = "mediatek,mt7986", "mediatek,mt7986-rfb"; + chosen { + stdout-path = &uart0; + tick-timer = &timer0; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "disabled"; +}; + +ð { + status = "okay"; + mediatek,gmac-id = <0>; + phy-mode = "sgmii"; + mediatek,switch = "mt7531"; + reset-gpios = <&gpio 5 GPIO_ACTIVE_HIGH>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&pinctrl { + spi_flash_pins: spi0-pins-func-1 { + mux { + function = "flash"; + groups = "spi0", "spi0_wp_hold"; + }; + + conf-pu { + pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP"; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_11>; + }; + + conf-pd { + pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO"; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_11>; + }; + }; + + snfi_pins: snfi-pins-func-1 { + mux { + function = "flash"; + groups = "snfi"; + }; + + clk { + pins = "SPI0_CLK"; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_00>; + }; + + conf-pu { + pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP"; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_00>; + }; + + conf-pd { + pins = "SPI0_MOSI", "SPI0_MISO"; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_00>; + }; + }; + + spic_pins: spi1-pins-func-1 { + mux { + function = "spi"; + groups = "spi1_2"; + }; + }; + + uart1_pins: spi1-pins-func-3 { + mux { + function = "uart"; + groups = "uart1_2"; + }; + }; + + pwm_pins: pwm0-pins-func-1 { + mux { + function = "pwm"; + groups = "pwm0"; + }; + }; + + mmc0_pins_default: mmc0default { + mux { + function = "flash"; + groups = "emmc_45"; + input-schmitt-enable; + }; + + conf-cmd-dat { + pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO", + "SPI0_CS", "SPI0_HOLD", "SPI0_WP", + "SPI1_CLK", "SPI1_MOSI", "SPI1_MISO"; + input-enable; + drive-strength = <MTK_DRIVE_4mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + conf-clk { + pins = "SPI1_CS"; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + conf-rst { + pins = "PWM1"; + drive-strength = <MTK_DRIVE_4mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; +}; + +&snand { + pinctrl-names = "default"; + pinctrl-0 = <&snfi_pins>; + status = "okay"; + quad-spi; +}; + +&spi0 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi_flash_pins>; + status = "okay"; + must_tx; + enhance_timing; + dma_ext; + ipm_design; + support_quad; + tick_dly = <2>; + sample_sel = <0>; + + spi_nor@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <52000000>; + }; + + spi_nand@1 { + compatible = "spi-nand"; + reg = <1>; + spi-max-frequency = <52000000>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_pins>; + status = "okay"; +}; + +&watchdog { + status = "disabled"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_default>; + bus-width = <8>; + max-frequency = <52000000>; + cap-mmc-highspeed; + cap-mmc-hw-reset; + vmmc-supply = <®_3p3v>; + non-removable; + status = "okay"; +}; diff --git a/arch/arm/dts/mt7986b-sd-rfb.dts b/arch/arm/dts/mt7986b-sd-rfb.dts new file mode 100644 index 00000000000..48f9320e7ae --- /dev/null +++ b/arch/arm/dts/mt7986b-sd-rfb.dts @@ -0,0 +1,173 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2022 MediaTek Inc. + * Author: Sam Shih <sam.shih@mediatek.com> + */ + +/dts-v1/; +#include "mt7986.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "mt7986-rfb"; + compatible = "mediatek,mt7986", "mediatek,mt7986-rfb", + "mediatek,mt7986-sd-rfb"; + chosen { + stdout-path = &uart0; + tick-timer = &timer0; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "disabled"; +}; + +ð { + status = "okay"; + mediatek,gmac-id = <0>; + phy-mode = "sgmii"; + mediatek,switch = "mt7531"; + reset-gpios = <&gpio 5 GPIO_ACTIVE_HIGH>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&pinctrl { + spi_flash_pins: spi0-pins-func-1 { + mux { + function = "flash"; + groups = "spi0", "spi0_wp_hold"; + }; + + conf-pu { + pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP"; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_11>; + }; + + conf-pd { + pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO"; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_11>; + }; + }; + + spic_pins: spi1-pins-func-1 { + mux { + function = "spi"; + groups = "spi1_2"; + }; + }; + + uart1_pins: spi1-pins-func-3 { + mux { + function = "uart"; + groups = "uart1_2"; + }; + }; + + pwm_pins: pwm0-pins-func-1 { + mux { + function = "pwm"; + groups = "pwm0"; + }; + }; + + mmc0_pins_default: mmc0default { + mux { + function = "flash"; + groups = "emmc_45"; + input-schmitt-enable; + }; + + conf-cmd-dat { + pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO", + "SPI0_CS", "SPI0_HOLD", "SPI0_WP", + "SPI1_CLK", "SPI1_MOSI", "SPI1_MISO"; + input-enable; + drive-strength = <MTK_DRIVE_4mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + conf-clk { + pins = "SPI1_CS"; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + conf-rst { + pins = "PWM1"; + drive-strength = <MTK_DRIVE_4mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; +}; + +&spi0 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi_flash_pins>; + status = "okay"; + must_tx; + enhance_timing; + dma_ext; + ipm_design; + support_quad; + tick_dly = <2>; + sample_sel = <0>; + + spi_nor@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <52000000>; + }; + + spi_nand@1 { + compatible = "spi-nand"; + reg = <1>; + spi-max-frequency = <52000000>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_pins>; + status = "okay"; +}; + +&watchdog { + status = "disabled"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_default>; + bus-width = <4>; + max-frequency = <52000000>; + cap-sd-highspeed; + r_smpl = <1>; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_3p3v>; + status = "okay"; +}; diff --git a/arch/arm/dts/versal-net-mini.dts b/arch/arm/dts/versal-net-mini.dts new file mode 100644 index 00000000000..8c29a6ed6bf --- /dev/null +++ b/arch/arm/dts/versal-net-mini.dts @@ -0,0 +1,67 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for Xilinx Versal NET + * + * Copyright (C) 2021 - 2022, Xilinx, Inc. + * Copyright (C) 2022, Advanced Micro Devices, Inc. + * + * Michal Simek <michal.simek@amd.com> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> + +/ { + compatible = "xlnx,versal-net-mini"; + model = "Xilinx Versal NET MINI"; + #address-cells = <2>; + #size-cells = <2>; + + memory: memory@0 { + reg = <0 0xBBF00000 0 0x100000>, <0 0 0 0x80000000>; + device_type = "memory"; + }; + + aliases { + /* serial0 = &serial0; */ + serial0 = &dcc; + }; + + chosen { + stdout-path = "serial0:115200"; + }; + + clk1: clk1 { + u-boot,dm-pre-reloc; + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000>; + }; + + dcc: dcc { + compatible = "arm,dcc"; + status = "okay"; + u-boot,dm-pre-reloc; + }; + + amba: axi { + compatible = "simple-bus"; + u-boot,dm-pre-reloc; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + serial0: serial@f1920000 { + u-boot,dm-pre-reloc; + compatible = "arm,pl011", "arm,primecell"; + reg = <0 0xf1920000 0 0x1000>; + reg-io-width = <4>; + clock-names = "uartclk", "apb_pclk"; + clocks = <&clk1>, <&clk1>; + clock = <1000000>; + current-speed = <115200>; + skip-init; + }; + }; +}; diff --git a/arch/arm/dts/xilinx-versal-net-virt.dts b/arch/arm/dts/xilinx-versal-net-virt.dts new file mode 100644 index 00000000000..c99257cb083 --- /dev/null +++ b/arch/arm/dts/xilinx-versal-net-virt.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Empty device tree for versal-net-virt board + * + * Copyright (C) 2022, Advanced Micro Devices, Inc. + */ + +/dts-v1/; + +/ { +}; diff --git a/arch/arm/dts/zynqmp-zcu102-revA.dts b/arch/arm/dts/zynqmp-zcu102-revA.dts index a4e92c8bb16..9d8e551ed27 100644 --- a/arch/arm/dts/zynqmp-zcu102-revA.dts +++ b/arch/arm/dts/zynqmp-zcu102-revA.dts @@ -200,13 +200,19 @@ phy-mode = "rgmii-id"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gem3_default>; - phy0: ethernet-phy@21 { - reg = <21>; - ti,rx-internal-delay = <0x8>; - ti,tx-internal-delay = <0xa>; - ti,fifo-depth = <0x1>; - ti,dp83867-rxctrl-strap-quirk; - /* reset-gpios = <&tca6416_u97 6 GPIO_ACTIVE_LOW>; */ + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@21 { + #phy-cells = <1>; + compatible = "ethernet-phy-id2000.a231"; + reg = <21>; + ti,rx-internal-delay = <0x8>; + ti,tx-internal-delay = <0xa>; + ti,fifo-depth = <0x1>; + ti,dp83867-rxctrl-strap-quirk; + reset-gpios = <&tca6416_u97 6 GPIO_ACTIVE_LOW>; + }; }; }; diff --git a/arch/arm/dts/zynqmp-zcu104-revA.dts b/arch/arm/dts/zynqmp-zcu104-revA.dts index 1418cffb204..b9d82afc518 100644 --- a/arch/arm/dts/zynqmp-zcu104-revA.dts +++ b/arch/arm/dts/zynqmp-zcu104-revA.dts @@ -109,12 +109,19 @@ phy-mode = "rgmii-id"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gem3_default>; - phy0: ethernet-phy@c { - reg = <0xc>; - ti,rx-internal-delay = <0x8>; - ti,tx-internal-delay = <0xa>; - ti,fifo-depth = <0x1>; - ti,dp83867-rxctrl-strap-quirk; + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@c { + #phy-cells = <1>; + compatible = "ethernet-phy-id2000.a231"; + reg = <0xc>; + ti,rx-internal-delay = <0x8>; + ti,tx-internal-delay = <0xa>; + ti,fifo-depth = <0x1>; + ti,dp83867-rxctrl-strap-quirk; + reset-gpios = <&tca6416_u97 6 GPIO_ACTIVE_LOW>; + }; }; }; diff --git a/arch/arm/dts/zynqmp-zcu104-revC.dts b/arch/arm/dts/zynqmp-zcu104-revC.dts index 7fd19ca3a8c..6f24e335a19 100644 --- a/arch/arm/dts/zynqmp-zcu104-revC.dts +++ b/arch/arm/dts/zynqmp-zcu104-revC.dts @@ -114,12 +114,19 @@ phy-mode = "rgmii-id"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gem3_default>; - phy0: ethernet-phy@c { - reg = <0xc>; - ti,rx-internal-delay = <0x8>; - ti,tx-internal-delay = <0xa>; - ti,fifo-depth = <0x1>; - ti,dp83867-rxctrl-strap-quirk; + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@c { + #phy-cells = <1>; + compatible = "ethernet-phy-id2000.a231"; + reg = <0xc>; + ti,rx-internal-delay = <0x8>; + ti,tx-internal-delay = <0xa>; + ti,fifo-depth = <0x1>; + ti,dp83867-rxctrl-strap-quirk; + reset-gpios = <&tca6416_u97 6 GPIO_ACTIVE_LOW>; + }; }; }; diff --git a/arch/arm/dts/zynqmp-zcu111-revA.dts b/arch/arm/dts/zynqmp-zcu111-revA.dts index e412992ff1b..2e95f22c3f0 100644 --- a/arch/arm/dts/zynqmp-zcu111-revA.dts +++ b/arch/arm/dts/zynqmp-zcu111-revA.dts @@ -172,12 +172,19 @@ phy-mode = "rgmii-id"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gem3_default>; - phy0: ethernet-phy@c { - reg = <0xc>; - ti,rx-internal-delay = <0x8>; - ti,tx-internal-delay = <0xa>; - ti,fifo-depth = <0x1>; - ti,dp83867-rxctrl-strap-quirk; + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@c { + #phy-cells = <1>; + compatible = "ethernet-phy-id2000.a231"; + reg = <0xc>; + ti,rx-internal-delay = <0x8>; + ti,tx-internal-delay = <0xa>; + ti,fifo-depth = <0x1>; + ti,dp83867-rxctrl-strap-quirk; + reset-gpios = <&tca6416_u22 6 GPIO_ACTIVE_LOW>; + }; }; }; diff --git a/arch/arm/dts/zynqmp-zcu208-revA.dts b/arch/arm/dts/zynqmp-zcu208-revA.dts index c5cdd58af6e..7e7e1577eb5 100644 --- a/arch/arm/dts/zynqmp-zcu208-revA.dts +++ b/arch/arm/dts/zynqmp-zcu208-revA.dts @@ -169,12 +169,19 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; - phy0: ethernet-phy@c { - reg = <0xc>; - ti,rx-internal-delay = <0x8>; - ti,tx-internal-delay = <0xa>; - ti,fifo-depth = <0x1>; - ti,dp83867-rxctrl-strap-quirk; + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@c { + #phy-cells = <1>; + compatible = "ethernet-phy-id2000.a231"; + reg = <0xc>; + ti,rx-internal-delay = <0x8>; + ti,tx-internal-delay = <0xa>; + ti,fifo-depth = <0x1>; + ti,dp83867-rxctrl-strap-quirk; + reset-gpios = <&tca6416_u15 6 GPIO_ACTIVE_LOW>; + }; }; }; diff --git a/arch/arm/dts/zynqmp-zcu216-revA.dts b/arch/arm/dts/zynqmp-zcu216-revA.dts index caae16965d6..35a30971cb7 100644 --- a/arch/arm/dts/zynqmp-zcu216-revA.dts +++ b/arch/arm/dts/zynqmp-zcu216-revA.dts @@ -176,15 +176,21 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; - phy0: ethernet-phy@c { - reg = <0xc>; - ti,rx-internal-delay = <0x8>; - ti,tx-internal-delay = <0xa>; - ti,fifo-depth = <0x1>; - ti,dp83867-rxctrl-strap-quirk; + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@c { + #phy-cells = <1>; + compatible = "ethernet-phy-id2000.a231"; + reg = <0xc>; + ti,rx-internal-delay = <0x8>; + ti,tx-internal-delay = <0xa>; + ti,fifo-depth = <0x1>; + ti,dp83867-rxctrl-strap-quirk; + reset-gpios = <&tca6416_u15 6 GPIO_ACTIVE_LOW>; + }; }; }; - &gpio { status = "okay"; gpio-line-names = "QSPI_LWR_CLK", "QSPI_LWR_DQ1", "QSPI_LWR_DQ2", "QSPI_LWR_DQ3", "QSPI_LWR_DQ0", /* 0 - 4 */ diff --git a/arch/arm/include/asm/arch-imx8m/imx-regs.h b/arch/arm/include/asm/arch-imx8m/imx-regs.h index ff3b9ddd9f7..29d5baaab8b 100644 --- a/arch/arm/include/asm/arch-imx8m/imx-regs.h +++ b/arch/arm/include/asm/arch-imx8m/imx-regs.h @@ -27,6 +27,7 @@ #define IOMUXC_GPR_BASE_ADDR 0x30340000 #define OCOTP_BASE_ADDR 0x30350000 #define ANATOP_BASE_ADDR 0x30360000 +#define SNVS_BASE_ADDR 0x30370000 #define CCM_BASE_ADDR 0x30380000 #define SRC_BASE_ADDR 0x30390000 #define GPC_BASE_ADDR 0x303A0000 @@ -113,6 +114,10 @@ #define SRC_DDR1_RCR_CORE_RESET_N_MASK BIT(1) #define SRC_DDR1_RCR_PRESET_N_MASK BIT(0) +#define SNVS_LPSR 0x4c +#define SNVS_LPLVDR 0x64 +#define SNVS_LPPGDR_INIT 0x41736166 + struct iomuxc_gpr_base_regs { u32 gpr[47]; }; diff --git a/arch/arm/mach-imx/imx8m/soc.c b/arch/arm/mach-imx/imx8m/soc.c index d115b25a5b6..a4863281e36 100644 --- a/arch/arm/mach-imx/imx8m/soc.c +++ b/arch/arm/mach-imx/imx8m/soc.c @@ -327,7 +327,7 @@ phys_size_t get_effective_memsize(void) } } -ulong board_get_usable_ram_top(ulong total_size) +phys_size_t board_get_usable_ram_top(phys_size_t total_size) { ulong top_addr; @@ -544,6 +544,16 @@ static int imx8m_check_clock(void *ctx, struct event *event) } EVENT_SPY(EVT_DM_POST_INIT, imx8m_check_clock); +static void imx8m_setup_snvs(void) +{ + /* Enable SNVS clock */ + clock_enable(CCGR_SNVS, 1); + /* Initialize glitch detect */ + writel(SNVS_LPPGDR_INIT, SNVS_BASE_ADDR + SNVS_LPLVDR); + /* Clear interrupt status */ + writel(0xffffffff, SNVS_BASE_ADDR + SNVS_LPSR); +} + int arch_cpu_init(void) { struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR; @@ -594,6 +604,8 @@ int arch_cpu_init(void) writel(0x200, &ocotp->ctrl_clr); } + imx8m_setup_snvs(); + return 0; } diff --git a/arch/arm/mach-mediatek/Kconfig b/arch/arm/mach-mediatek/Kconfig index f79a5c62cd3..04aa2fd97f8 100644 --- a/arch/arm/mach-mediatek/Kconfig +++ b/arch/arm/mach-mediatek/Kconfig @@ -40,6 +40,24 @@ config TARGET_MT7629 including DDR3, crypto engine, 3x3 11n/ac Wi-Fi, Gigabit Ethernet, switch, USB3.0, PCIe, UART, SPI, I2C and PWM. +config TARGET_MT7981 + bool "MediaTek MT7981 SoC" + select ARM64 + select CPU + help + The MediaTek MT7981 is a ARM64-based SoC with a dual-core Cortex-A53. + including UART, SPI, USB, NAND, SNFI, PWM, Gigabit Ethernet, I2C, + built-in Wi-Fi, and PCIe. + +config TARGET_MT7986 + bool "MediaTek MT7986 SoC" + select ARM64 + select CPU + help + The MediaTek MT7986 is a ARM64-based SoC with a quad-core Cortex-A53. + including UART, SPI, SPI flash, USB3.0, MMC, NAND, SNFI, PWM, PCIe, + Gigabit Ethernet, I2C, built-in 4x4 Wi-Fi, and PCIe. + config TARGET_MT8183 bool "MediaTek MT8183 SoC" select ARM64 @@ -84,6 +102,8 @@ config SYS_BOARD default "mt7622" if TARGET_MT7622 default "mt7623" if TARGET_MT7623 default "mt7629" if TARGET_MT7629 + default "mt7981" if TARGET_MT7981 + default "mt7986" if TARGET_MT7986 default "mt8183" if TARGET_MT8183 default "mt8512" if TARGET_MT8512 default "mt8516" if TARGET_MT8516 @@ -99,6 +119,8 @@ config SYS_CONFIG_NAME default "mt7622" if TARGET_MT7622 default "mt7623" if TARGET_MT7623 default "mt7629" if TARGET_MT7629 + default "mt7981" if TARGET_MT7981 + default "mt7986" if TARGET_MT7986 default "mt8183" if TARGET_MT8183 default "mt8512" if TARGET_MT8512 default "mt8516" if TARGET_MT8516 @@ -113,6 +135,7 @@ config MTK_BROM_HEADER_INFO string default "media=nor" if TARGET_MT8518 || TARGET_MT8512 || TARGET_MT7629 || TARGET_MT7622 default "media=emmc" if TARGET_MT8516 || TARGET_MT8365 || TARGET_MT8183 + default "media=snand;nandinfo=2k+64" if TARGET_MT7981 || TARGET_MT7986 default "lk=1" if TARGET_MT7623 endif diff --git a/arch/arm/mach-mediatek/Makefile b/arch/arm/mach-mediatek/Makefile index 0f5b0c16d2c..fc85293f713 100644 --- a/arch/arm/mach-mediatek/Makefile +++ b/arch/arm/mach-mediatek/Makefile @@ -7,6 +7,8 @@ obj-$(CONFIG_MT8512) += mt8512/ obj-$(CONFIG_TARGET_MT7622) += mt7622/ obj-$(CONFIG_TARGET_MT7623) += mt7623/ obj-$(CONFIG_TARGET_MT7629) += mt7629/ +obj-$(CONFIG_TARGET_MT7981) += mt7981/ +obj-$(CONFIG_TARGET_MT7986) += mt7986/ obj-$(CONFIG_TARGET_MT8183) += mt8183/ obj-$(CONFIG_TARGET_MT8516) += mt8516/ obj-$(CONFIG_TARGET_MT8518) += mt8518/ diff --git a/arch/arm/mach-mediatek/mt7981/Makefile b/arch/arm/mach-mediatek/mt7981/Makefile new file mode 100644 index 00000000000..007eb4a3679 --- /dev/null +++ b/arch/arm/mach-mediatek/mt7981/Makefile @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 + +obj-y += init.o +obj-y += lowlevel_init.o diff --git a/arch/arm/mach-mediatek/mt7981/init.c b/arch/arm/mach-mediatek/mt7981/init.c new file mode 100644 index 00000000000..4f77a3defb0 --- /dev/null +++ b/arch/arm/mach-mediatek/mt7981/init.c @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2022 MediaTek Inc. + * Author: Sam Shih <sam.shih@mediatek.com> + */ + +#include <init.h> +#include <asm/armv8/mmu.h> +#include <asm/system.h> +#include <asm/global_data.h> + +DECLARE_GLOBAL_DATA_PTR; + +int dram_init(void) +{ + gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, SZ_2G); + + return 0; +} + +void reset_cpu(ulong addr) +{ + psci_system_reset(); +} + +static struct mm_region mt7981_mem_map[] = { + { + /* DDR */ + .virt = 0x40000000UL, + .phys = 0x40000000UL, + .size = 0x80000000UL, + .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | PTE_BLOCK_OUTER_SHARE, + }, { + .virt = 0x00000000UL, + .phys = 0x00000000UL, + .size = 0x40000000UL, + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | + PTE_BLOCK_NON_SHARE | + PTE_BLOCK_PXN | PTE_BLOCK_UXN + }, { + 0, + } +}; + +struct mm_region *mem_map = mt7981_mem_map; diff --git a/arch/arm/mach-mediatek/mt7981/lowlevel_init.S b/arch/arm/mach-mediatek/mt7981/lowlevel_init.S new file mode 100644 index 00000000000..85a1cea359a --- /dev/null +++ b/arch/arm/mach-mediatek/mt7981/lowlevel_init.S @@ -0,0 +1,32 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2022 MediaTek Inc. + * Author: Sam Shih <sam.shih@mediatek.com> + */ + +/* + * Switch from AArch64 EL2 to AArch32 EL2 + * @param inputs: + * x0: argument, zero + * x1: machine nr + * x2: fdt address + * x3: input argument + * x4: kernel entry point + * @param outputs for secure firmware: + * x0: function id + * x1: kernel entry point + * x2: machine nr + * x3: fdt address + * + * [1] https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/tree/plat/mediatek/common/mtk_sip_svc.c +*/ + +.global armv8_el2_to_aarch32 +armv8_el2_to_aarch32: + mov x3, x2 + mov x2, x1 + mov x1, x4 + mov x4, #0 + ldr x0, =0x82000200 /* MTK_SIP_KERNEL_BOOT_AARCH32 */ + SMC #0 + ret diff --git a/arch/arm/mach-mediatek/mt7986/Makefile b/arch/arm/mach-mediatek/mt7986/Makefile new file mode 100644 index 00000000000..007eb4a3679 --- /dev/null +++ b/arch/arm/mach-mediatek/mt7986/Makefile @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 + +obj-y += init.o +obj-y += lowlevel_init.o diff --git a/arch/arm/mach-mediatek/mt7986/init.c b/arch/arm/mach-mediatek/mt7986/init.c new file mode 100644 index 00000000000..0fd459657d9 --- /dev/null +++ b/arch/arm/mach-mediatek/mt7986/init.c @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2022 MediaTek Inc. + * Author: Sam Shih <sam.shih@mediatek.com> + */ + +#include <init.h> +#include <asm/armv8/mmu.h> +#include <asm/system.h> +#include <asm/global_data.h> + +DECLARE_GLOBAL_DATA_PTR; + +int dram_init(void) +{ + gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, SZ_2G); + + return 0; +} + +void reset_cpu(ulong addr) +{ + psci_system_reset(); +} + +static struct mm_region mt7986_mem_map[] = { + { + /* DDR */ + .virt = 0x40000000UL, + .phys = 0x40000000UL, + .size = 0x80000000UL, + .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | PTE_BLOCK_OUTER_SHARE, + }, { + .virt = 0x00000000UL, + .phys = 0x00000000UL, + .size = 0x40000000UL, + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | + PTE_BLOCK_NON_SHARE | + PTE_BLOCK_PXN | PTE_BLOCK_UXN + }, { + 0, + } +}; + +struct mm_region *mem_map = mt7986_mem_map; diff --git a/arch/arm/mach-mediatek/mt7986/lowlevel_init.S b/arch/arm/mach-mediatek/mt7986/lowlevel_init.S new file mode 100644 index 00000000000..85a1cea359a --- /dev/null +++ b/arch/arm/mach-mediatek/mt7986/lowlevel_init.S @@ -0,0 +1,32 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2022 MediaTek Inc. + * Author: Sam Shih <sam.shih@mediatek.com> + */ + +/* + * Switch from AArch64 EL2 to AArch32 EL2 + * @param inputs: + * x0: argument, zero + * x1: machine nr + * x2: fdt address + * x3: input argument + * x4: kernel entry point + * @param outputs for secure firmware: + * x0: function id + * x1: kernel entry point + * x2: machine nr + * x3: fdt address + * + * [1] https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/tree/plat/mediatek/common/mtk_sip_svc.c +*/ + +.global armv8_el2_to_aarch32 +armv8_el2_to_aarch32: + mov x3, x2 + mov x2, x1 + mov x1, x4 + mov x4, #0 + ldr x0, =0x82000200 /* MTK_SIP_KERNEL_BOOT_AARCH32 */ + SMC #0 + ret diff --git a/arch/arm/mach-mvebu/arm64-common.c b/arch/arm/mach-mvebu/arm64-common.c index 238edbe6ba5..63f6af5fe8f 100644 --- a/arch/arm/mach-mvebu/arm64-common.c +++ b/arch/arm/mach-mvebu/arm64-common.c @@ -30,7 +30,7 @@ DECLARE_GLOBAL_DATA_PTR; */ #define USABLE_RAM_SIZE 0x80000000ULL -ulong board_get_usable_ram_top(ulong total_size) +phys_size_t board_get_usable_ram_top(phys_size_t total_size) { unsigned long top = CONFIG_SYS_SDRAM_BASE + min(gd->ram_size, USABLE_RAM_SIZE); diff --git a/arch/arm/mach-rockchip/sdram.c b/arch/arm/mach-rockchip/sdram.c index 705ec7ba645..12f1d7ee563 100644 --- a/arch/arm/mach-rockchip/sdram.c +++ b/arch/arm/mach-rockchip/sdram.c @@ -205,7 +205,7 @@ int dram_init(void) return 0; } -ulong board_get_usable_ram_top(ulong total_size) +phys_size_t board_get_usable_ram_top(phys_size_t total_size) { unsigned long top = CONFIG_SYS_SDRAM_BASE + SDRAM_MAX_SIZE; diff --git a/arch/arm/mach-stm32mp/dram_init.c b/arch/arm/mach-stm32mp/dram_init.c index 920b99bb68f..9346fa8546d 100644 --- a/arch/arm/mach-stm32mp/dram_init.c +++ b/arch/arm/mach-stm32mp/dram_init.c @@ -40,7 +40,7 @@ int dram_init(void) return 0; } -ulong board_get_usable_ram_top(ulong total_size) +phys_size_t board_get_usable_ram_top(phys_size_t total_size) { phys_size_t size; phys_addr_t reg; diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c index 8f7c894286d..62bb40b8c89 100644 --- a/arch/arm/mach-sunxi/board.c +++ b/arch/arm/mach-sunxi/board.c @@ -65,7 +65,7 @@ static struct mm_region sunxi_mem_map[] = { }; struct mm_region *mem_map = sunxi_mem_map; -ulong board_get_usable_ram_top(ulong total_size) +phys_size_t board_get_usable_ram_top(phys_size_t total_size) { /* Some devices (like the EMAC) have a 32-bit DMA limit. */ if (gd->ram_top > (1ULL << 32)) diff --git a/arch/arm/mach-tegra/board2.c b/arch/arm/mach-tegra/board2.c index 8950e678a61..1994db0e15f 100644 --- a/arch/arm/mach-tegra/board2.c +++ b/arch/arm/mach-tegra/board2.c @@ -401,7 +401,7 @@ int dram_init_banksize(void) * This function is called before dram_init_banksize(), so we can't simply * return gd->bd->bi_dram[1].start + gd->bd->bi_dram[1].size. */ -ulong board_get_usable_ram_top(ulong total_size) +phys_size_t board_get_usable_ram_top(phys_size_t total_size) { ulong ram_top; diff --git a/arch/arm/mach-versal-net/Kconfig b/arch/arm/mach-versal-net/Kconfig new file mode 100644 index 00000000000..62825e189fe --- /dev/null +++ b/arch/arm/mach-versal-net/Kconfig @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: GPL-2.0 + +if ARCH_VERSAL_NET + +config SYS_BOARD + string "Board name" + default "versal-net" + +config SYS_VENDOR + string "Vendor name" + default "xilinx" + +config SYS_SOC + default "versal-net" + +config SYS_CONFIG_NAME + string "Board configuration name" + default "xilinx_versal_net" + help + This option contains information about board configuration name. + Based on this option include/configs/<CONFIG_SYS_CONFIG_NAME>.h header + will be used for board configuration. + +config SYS_MEM_RSVD_FOR_MMU + bool "Reserve memory for MMU Table" + help + If defined this option is used to setup different space for + MMU table than the one which will be allocated during + relocation. + +config GICV3 + def_bool y + +config SYS_MALLOC_LEN + default 0x2000000 + +config ZYNQ_SDHCI_MAX_FREQ + default 200000000 + +source "board/xilinx/Kconfig" +source "board/xilinx/versal-net/Kconfig" + +endif diff --git a/arch/arm/mach-versal-net/Makefile b/arch/arm/mach-versal-net/Makefile new file mode 100644 index 00000000000..e12c4c0e673 --- /dev/null +++ b/arch/arm/mach-versal-net/Makefile @@ -0,0 +1,10 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Copyright (C) 2021 - 2022, Xilinx, Inc. +# Copyright (C) 2022, Advanced Micro Devices, Inc. +# +# Michal Simek <michal.simek@amd.com> +# + +obj-y += clk.o +obj-y += cpu.o diff --git a/arch/arm/mach-versal-net/clk.c b/arch/arm/mach-versal-net/clk.c new file mode 100644 index 00000000000..d097de7afa6 --- /dev/null +++ b/arch/arm/mach-versal-net/clk.c @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2016 - 2022, Xilinx, Inc. + * Copyright (C) 2022, Advanced Micro Devices, Inc. + * + * Michal Simek <michal.simek@amd.com> + */ + +#include <common.h> +#include <init.h> +#include <time.h> +#include <asm/global_data.h> + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_CLOCKS +/** + * set_cpu_clk_info - Initialize clock framework + * + * Return: 0 always. + * + * This function is called from common code after relocation and sets up the + * clock framework. The framework must not be used before this function had been + * called. + */ +int set_cpu_clk_info(void) +{ + gd->cpu_clk = get_tbclk(); + + gd->bd->bi_arm_freq = gd->cpu_clk / 1000000; + gd->bd->bi_dsp_freq = 0; + + return 0; +} +#endif diff --git a/arch/arm/mach-versal-net/cpu.c b/arch/arm/mach-versal-net/cpu.c new file mode 100644 index 00000000000..4c9b15411df --- /dev/null +++ b/arch/arm/mach-versal-net/cpu.c @@ -0,0 +1,89 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2021 - 2022, Xilinx, Inc. + * Copyright (C) 2022, Advanced Micro Devices, Inc. + * + * Michal Simek <michal.simek@amd.com> + */ + +#include <common.h> +#include <init.h> +#include <asm/armv8/mmu.h> +#include <asm/cache.h> +#include <asm/global_data.h> +#include <asm/io.h> +#include <asm/arch/hardware.h> +#include <asm/arch/sys_proto.h> +#include <asm/cache.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define VERSAL_NET_MEM_MAP_USED 5 + +#define DRAM_BANKS CONFIG_NR_DRAM_BANKS + +/* +1 is end of list which needs to be empty */ +#define VERSAL_NET_MEM_MAP_MAX (VERSAL_NET_MEM_MAP_USED + DRAM_BANKS + 1) + +static struct mm_region versal_mem_map[VERSAL_NET_MEM_MAP_MAX] = { + { + .virt = 0x80000000UL, + .phys = 0x80000000UL, + .size = 0x70000000UL, + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | + PTE_BLOCK_NON_SHARE | + PTE_BLOCK_PXN | PTE_BLOCK_UXN + }, { + .virt = 0xf0000000UL, + .phys = 0xf0000000UL, + .size = 0x0fe00000UL, + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | + PTE_BLOCK_NON_SHARE | + PTE_BLOCK_PXN | PTE_BLOCK_UXN + }, { + .virt = 0x400000000UL, + .phys = 0x400000000UL, + .size = 0x200000000UL, + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | + PTE_BLOCK_NON_SHARE | + PTE_BLOCK_PXN | PTE_BLOCK_UXN + }, { + .virt = 0x600000000UL, + .phys = 0x600000000UL, + .size = 0x800000000UL, + .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | + PTE_BLOCK_INNER_SHARE + }, { + .virt = 0xe00000000UL, + .phys = 0xe00000000UL, + .size = 0xf200000000UL, + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | + PTE_BLOCK_NON_SHARE | + PTE_BLOCK_PXN | PTE_BLOCK_UXN + } +}; + +void mem_map_fill(void) +{ + int banks = VERSAL_NET_MEM_MAP_USED; + + for (int i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { + /* Zero size means no more DDR that's this is end */ + if (!gd->bd->bi_dram[i].size) + break; + + versal_mem_map[banks].virt = gd->bd->bi_dram[i].start; + versal_mem_map[banks].phys = gd->bd->bi_dram[i].start; + versal_mem_map[banks].size = gd->bd->bi_dram[i].size; + versal_mem_map[banks].attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | + PTE_BLOCK_INNER_SHARE; + banks = banks + 1; + } +} + +struct mm_region *mem_map = versal_mem_map; + +u64 get_page_table_size(void) +{ + return 0x14000; +} diff --git a/arch/arm/mach-versal-net/include/mach/hardware.h b/arch/arm/mach-versal-net/include/mach/hardware.h new file mode 100644 index 00000000000..808ce48fd14 --- /dev/null +++ b/arch/arm/mach-versal-net/include/mach/hardware.h @@ -0,0 +1,31 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2016 - 2022, Xilinx, Inc. + * Copyright (C) 2022, Advanced Micro Devices, Inc. + */ + +#ifndef __ASSEMBLY__ +#include <linux/bitops.h> +#endif + +#define PMC_TAP 0xF11A0000 + +#define PMC_TAP_IDCODE (PMC_TAP + 0) +#define PMC_TAP_VERSION (PMC_TAP + 0x4) +# define PMC_VERSION_MASK GENMASK(7, 0) +# define PS_VERSION_MASK GENMASK(15, 8) +# define RTL_VERSION_MASK GENMASK(23, 16) +# define PLATFORM_MASK GENMASK(27, 24) +# define PLATFORM_VERSION_MASK GENMASK(31, 28) +#define PMC_TAP_USERCODE (PMC_TAP + 0x8) + +enum versal_net_platform { + VERSAL_NET_SILICON = 0, + VERSAL_NET_SPP = 1, + VERSAL_NET_EMU = 2, + VERSAL_NET_QEMU = 3, +}; + +#define VERSAL_SLCR_BASEADDR 0xF1060000 +#define VERSAL_AXI_MUX_SEL (VERSAL_SLCR_BASEADDR + 0x504) +#define VERSAL_OSPI_LINEAR_MODE BIT(1) diff --git a/arch/arm/mach-versal-net/include/mach/sys_proto.h b/arch/arm/mach-versal-net/include/mach/sys_proto.h new file mode 100644 index 00000000000..5bba9030f2d --- /dev/null +++ b/arch/arm/mach-versal-net/include/mach/sys_proto.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2021 - 2022, Xilinx, Inc. + * Copyright (C) 2022, Advanced Micro Devices, Inc. + */ + +#include <linux/build_bug.h> + +void mem_map_fill(void); + +static inline int zynqmp_mmio_write(const u32 address, const u32 mask, + const u32 value) +{ + BUILD_BUG(); + return -EINVAL; +} diff --git a/arch/mips/mach-jz47xx/jz4780/jz4780.c b/arch/mips/mach-jz47xx/jz4780/jz4780.c index fefba12873b..a57ec7802bb 100644 --- a/arch/mips/mach-jz47xx/jz4780/jz4780.c +++ b/arch/mips/mach-jz47xx/jz4780/jz4780.c @@ -76,7 +76,7 @@ void board_init_f(ulong dummy) } #endif /* CONFIG_SPL_BUILD */ -ulong board_get_usable_ram_top(ulong total_size) +phys_size_t board_get_usable_ram_top(phys_size_t total_size) { return CONFIG_SYS_SDRAM_BASE + (256 * 1024 * 1024); } diff --git a/arch/mips/mach-octeon/dram.c b/arch/mips/mach-octeon/dram.c index 4679260f17a..9c5789b1c8e 100644 --- a/arch/mips/mach-octeon/dram.c +++ b/arch/mips/mach-octeon/dram.c @@ -77,7 +77,7 @@ phys_size_t get_effective_memsize(void) return UBOOT_RAM_SIZE_MAX; } -ulong board_get_usable_ram_top(ulong total_size) +phys_size_t board_get_usable_ram_top(phys_size_t total_size) { if (IS_ENABLED(CONFIG_RAM_OCTEON)) { /* Map a maximum of 256MiB - return not size but address */ diff --git a/arch/powerpc/cpu/mpc85xx/tlb.c b/arch/powerpc/cpu/mpc85xx/tlb.c index ab616497fa0..e39fe14382d 100644 --- a/arch/powerpc/cpu/mpc85xx/tlb.c +++ b/arch/powerpc/cpu/mpc85xx/tlb.c @@ -312,7 +312,10 @@ unsigned int setup_ddr_tlbs_phys(phys_addr_t p_addr, if (size || memsize > CONFIG_MAX_MEM_MAPPED) { print_size(memsize > CONFIG_MAX_MEM_MAPPED ? memsize - CONFIG_MAX_MEM_MAPPED + size : size, - " left unmapped\n"); + " of DDR memory left unmapped in U-Boot\n"); +#ifndef CONFIG_SPL_BUILD + puts(" "); +#endif } return memsize_in_meg; diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig index 78e964db129..32a90b83b5a 100644 --- a/arch/riscv/Kconfig +++ b/arch/riscv/Kconfig @@ -269,6 +269,20 @@ config XIP from a NOR flash memory without copying the code to ram. Say yes here if U-Boot boots from flash directly. +config SPL_XIP + bool "Enable XIP mode for SPL" + help + If SPL starts in read-only memory (XIP for example) then we shouldn't + rely on lock variables (for example hart_lottery and available_harts_lock), + this affects only SPL, other stages should proceed as non-XIP. + +config AVAILABLE_HARTS + bool "Send IPI by available harts" + default y + help + By default, IPI sending mechanism will depend on available_harts. + If disable this, it will send IPI by CPUs node numbers of device tree. + config SHOW_REGS bool "Show registers on unhandled exception" diff --git a/arch/riscv/cpu/cpu.c b/arch/riscv/cpu/cpu.c index 3ffcbbd23fa..52ab02519f8 100644 --- a/arch/riscv/cpu/cpu.c +++ b/arch/riscv/cpu/cpu.c @@ -19,15 +19,17 @@ * The variables here must be stored in the data section since they are used * before the bss section is available. */ -#ifndef CONFIG_XIP +#if !CONFIG_IS_ENABLED(XIP) u32 hart_lottery __section(".data") = 0; +#ifdef CONFIG_AVAILABLE_HARTS /* * The main hart running U-Boot has acquired available_harts_lock until it has * finished initialization of global data. */ u32 available_harts_lock = 1; #endif +#endif static inline bool supports_extension(char ext) { diff --git a/arch/riscv/cpu/fu540/dram.c b/arch/riscv/cpu/fu540/dram.c index 1fdc7837b86..44e11bd56c5 100644 --- a/arch/riscv/cpu/fu540/dram.c +++ b/arch/riscv/cpu/fu540/dram.c @@ -21,7 +21,7 @@ int dram_init_banksize(void) return fdtdec_setup_memory_banksize(); } -ulong board_get_usable_ram_top(ulong total_size) +phys_size_t board_get_usable_ram_top(phys_size_t total_size) { /* * Ensure that we run from first 4GB so that all diff --git a/arch/riscv/cpu/fu740/dram.c b/arch/riscv/cpu/fu740/dram.c index 1dc77efeca5..d6d4a41d25e 100644 --- a/arch/riscv/cpu/fu740/dram.c +++ b/arch/riscv/cpu/fu740/dram.c @@ -20,7 +20,7 @@ int dram_init_banksize(void) return fdtdec_setup_memory_banksize(); } -ulong board_get_usable_ram_top(ulong total_size) +phys_size_t board_get_usable_ram_top(phys_size_t total_size) { #ifdef CONFIG_64BIT /* diff --git a/arch/riscv/cpu/generic/dram.c b/arch/riscv/cpu/generic/dram.c index 1fdc7837b86..44e11bd56c5 100644 --- a/arch/riscv/cpu/generic/dram.c +++ b/arch/riscv/cpu/generic/dram.c @@ -21,7 +21,7 @@ int dram_init_banksize(void) return fdtdec_setup_memory_banksize(); } -ulong board_get_usable_ram_top(ulong total_size) +phys_size_t board_get_usable_ram_top(phys_size_t total_size) { /* * Ensure that we run from first 4GB so that all diff --git a/arch/riscv/cpu/start.S b/arch/riscv/cpu/start.S index b7f21ab63e0..4687bca3c99 100644 --- a/arch/riscv/cpu/start.S +++ b/arch/riscv/cpu/start.S @@ -122,7 +122,7 @@ call_board_init_f_0: call_harts_early_init: jal harts_early_init -#ifndef CONFIG_XIP +#if !CONFIG_IS_ENABLED(XIP) /* * Pick hart to initialize global data and run U-Boot. The other harts * wait for initialization to complete. @@ -152,22 +152,24 @@ call_harts_early_init: /* save the boot hart id to global_data */ SREG tp, GD_BOOT_HART(gp) -#ifndef CONFIG_XIP +#if !CONFIG_IS_ENABLED(XIP) +#ifdef CONFIG_AVAILABLE_HARTS la t0, available_harts_lock amoswap.w.rl zero, zero, 0(t0) +#endif wait_for_gd_init: - la t0, available_harts_lock - li t1, 1 -1: amoswap.w.aq t1, t1, 0(t0) - bnez t1, 1b - /* * Set the global data pointer only when gd_t has been initialized. * This was already set by arch_setup_gd on the boot hart, but all other * harts' global data pointers gets set here. */ mv gp, s0 +#ifdef CONFIG_AVAILABLE_HARTS + la t0, available_harts_lock + li t1, 1 +1: amoswap.w.aq t1, t1, 0(t0) + bnez t1, 1b /* register available harts in the available_harts mask */ li t1, 1 @@ -177,6 +179,7 @@ wait_for_gd_init: SREG t2, GD_AVAILABLE_HARTS(gp) amoswap.w.rl zero, zero, 0(t0) +#endif /* * Continue on hart lottery winner, others branch to diff --git a/arch/riscv/include/asm/global_data.h b/arch/riscv/include/asm/global_data.h index 095484a6358..858594a1911 100644 --- a/arch/riscv/include/asm/global_data.h +++ b/arch/riscv/include/asm/global_data.h @@ -27,9 +27,11 @@ struct arch_global_data { #if CONFIG_IS_ENABLED(SMP) struct ipi_data ipi[CONFIG_NR_CPUS]; #endif -#ifndef CONFIG_XIP +#if !CONFIG_IS_ENABLED(XIP) +#ifdef CONFIG_AVAILABLE_HARTS ulong available_harts; #endif +#endif }; #include <asm-generic/global_data.h> diff --git a/arch/riscv/lib/asm-offsets.c b/arch/riscv/lib/asm-offsets.c index f1fe089b3d8..452dfcea97f 100644 --- a/arch/riscv/lib/asm-offsets.c +++ b/arch/riscv/lib/asm-offsets.c @@ -16,9 +16,11 @@ int main(void) { DEFINE(GD_BOOT_HART, offsetof(gd_t, arch.boot_hart)); DEFINE(GD_FIRMWARE_FDT_ADDR, offsetof(gd_t, arch.firmware_fdt_addr)); -#ifndef CONFIG_XIP +#if !CONFIG_IS_ENABLED(XIP) +#ifdef CONFIG_AVAILABLE_HARTS DEFINE(GD_AVAILABLE_HARTS, offsetof(gd_t, arch.available_harts)); #endif +#endif return 0; } diff --git a/arch/riscv/lib/smp.c b/arch/riscv/lib/smp.c index ba992100adf..c0f65af1916 100644 --- a/arch/riscv/lib/smp.c +++ b/arch/riscv/lib/smp.c @@ -45,11 +45,13 @@ static int send_ipi_many(struct ipi_data *ipi, int wait) continue; } -#ifndef CONFIG_XIP +#if !CONFIG_IS_ENABLED(XIP) +#ifdef CONFIG_AVAILABLE_HARTS /* skip if hart is not available */ if (!(gd->arch.available_harts & (1 << reg))) continue; #endif +#endif gd->arch.ipi[reg].addr = ipi->addr; gd->arch.ipi[reg].arg0 = ipi->arg0; diff --git a/arch/sandbox/cpu/os.c b/arch/sandbox/cpu/os.c index f937991139c..d6170adaf5e 100644 --- a/arch/sandbox/cpu/os.c +++ b/arch/sandbox/cpu/os.c @@ -669,6 +669,11 @@ void os_puts(const char *str) os_putc(*str++); } +void os_flush(void) +{ + fflush(stdout); +} + int os_write_ram_buf(const char *fname) { struct sandbox_state *state = state_get_current(); @@ -1012,8 +1017,24 @@ void *os_find_text_base(void) return base; } +/** + * os_unblock_signals() - unblock all signals + * + * If we are relaunching the sandbox in a signal handler, we have to unblock + * the respective signal before calling execv(). See signal(7) man-page. + */ +static void os_unblock_signals(void) +{ + sigset_t sigs; + + sigfillset(&sigs); + sigprocmask(SIG_UNBLOCK, &sigs, NULL); +} + void os_relaunch(char *argv[]) { + os_unblock_signals(); + execv(argv[0], argv); os_exit(1); } diff --git a/arch/sandbox/dts/sandbox.dtsi b/arch/sandbox/dts/sandbox.dtsi index 56e6b38bfa7..de7a218f457 100644 --- a/arch/sandbox/dts/sandbox.dtsi +++ b/arch/sandbox/dts/sandbox.dtsi @@ -245,6 +245,10 @@ compatible = "sandbox,sandbox-rng"; }; + scsi { + compatible = "sandbox,scsi"; + }; + sound { compatible = "sandbox,sound"; cpu { diff --git a/arch/sandbox/dts/test.dts b/arch/sandbox/dts/test.dts index c7fffa2da27..4ee471238ee 100644 --- a/arch/sandbox/dts/test.dts +++ b/arch/sandbox/dts/test.dts @@ -1158,6 +1158,11 @@ backlight = <&backlight 0 100>; }; + scsi { + compatible = "sandbox,scsi"; + sandbox,filepath = "scsi.img"; + }; + smem@0 { compatible = "sandbox,smem"; }; diff --git a/arch/x86/cpu/broadwell/sdram.c b/arch/x86/cpu/broadwell/sdram.c index c104a849a54..1295121ae5b 100644 --- a/arch/x86/cpu/broadwell/sdram.c +++ b/arch/x86/cpu/broadwell/sdram.c @@ -25,7 +25,7 @@ #include <asm/arch/pei_data.h> #include <asm/arch/pm.h> -ulong board_get_usable_ram_top(ulong total_size) +phys_size_t board_get_usable_ram_top(phys_size_t total_size) { return mrc_common_board_get_usable_ram_top(total_size); } diff --git a/arch/x86/cpu/coreboot/sdram.c b/arch/x86/cpu/coreboot/sdram.c index 4a256bad445..f4ee4cdf5d8 100644 --- a/arch/x86/cpu/coreboot/sdram.c +++ b/arch/x86/cpu/coreboot/sdram.c @@ -27,7 +27,7 @@ unsigned int install_e820_map(unsigned int max_entries, * address, and how far U-Boot is moved by relocation are set in the global * data structure. */ -ulong board_get_usable_ram_top(ulong total_size) +phys_size_t board_get_usable_ram_top(phys_size_t total_size) { uintptr_t dest_addr = 0; int i; diff --git a/arch/x86/cpu/efi/payload.c b/arch/x86/cpu/efi/payload.c index b7778565b19..1c28a43778e 100644 --- a/arch/x86/cpu/efi/payload.c +++ b/arch/x86/cpu/efi/payload.c @@ -27,7 +27,7 @@ DECLARE_GLOBAL_DATA_PTR; * the relocation address, and how far U-Boot is moved by relocation are * set in the global data structure. */ -ulong board_get_usable_ram_top(ulong total_size) +phys_size_t board_get_usable_ram_top(phys_size_t total_size) { struct efi_mem_desc *desc, *end; struct efi_entry_memmap *map; diff --git a/arch/x86/cpu/efi/sdram.c b/arch/x86/cpu/efi/sdram.c index af65982fd0c..f3086db42c4 100644 --- a/arch/x86/cpu/efi/sdram.c +++ b/arch/x86/cpu/efi/sdram.c @@ -11,7 +11,7 @@ DECLARE_GLOBAL_DATA_PTR; -ulong board_get_usable_ram_top(ulong total_size) +phys_size_t board_get_usable_ram_top(phys_size_t total_size) { return (ulong)efi_get_ram_base() + gd->ram_size; } diff --git a/arch/x86/cpu/intel_common/mrc.c b/arch/x86/cpu/intel_common/mrc.c index a97b0b7ceb4..a4918fbad61 100644 --- a/arch/x86/cpu/intel_common/mrc.c +++ b/arch/x86/cpu/intel_common/mrc.c @@ -25,7 +25,7 @@ static const char *const ecc_decoder[] = { "active" }; -ulong mrc_common_board_get_usable_ram_top(ulong total_size) +phys_size_t mrc_common_board_get_usable_ram_top(phys_size_t total_size) { struct memory_info *info = &gd->arch.meminfo; uintptr_t dest_addr = 0; @@ -50,7 +50,7 @@ ulong mrc_common_board_get_usable_ram_top(ulong total_size) dest_addr = largest->start + largest->size; - return (ulong)dest_addr; + return (phys_size_t)dest_addr; } void mrc_common_dram_init_banksize(void) diff --git a/arch/x86/cpu/ivybridge/sdram.c b/arch/x86/cpu/ivybridge/sdram.c index dd6b8753de6..1a0ec433e65 100644 --- a/arch/x86/cpu/ivybridge/sdram.c +++ b/arch/x86/cpu/ivybridge/sdram.c @@ -44,7 +44,7 @@ DECLARE_GLOBAL_DATA_PTR; #define CMOS_OFFSET_MRC_SEED_S3 156 #define CMOS_OFFSET_MRC_SEED_CHK 160 -ulong board_get_usable_ram_top(ulong total_size) +phys_size_t board_get_usable_ram_top(phys_size_t total_size) { return mrc_common_board_get_usable_ram_top(total_size); } diff --git a/arch/x86/cpu/qemu/dram.c b/arch/x86/cpu/qemu/dram.c index c1745501294..595c397d4a4 100644 --- a/arch/x86/cpu/qemu/dram.c +++ b/arch/x86/cpu/qemu/dram.c @@ -71,7 +71,7 @@ int dram_init_banksize(void) * the relocation address, and how far U-Boot is moved by relocation are * set in the global data structure. */ -ulong board_get_usable_ram_top(ulong total_size) +phys_size_t board_get_usable_ram_top(phys_size_t total_size) { return qemu_get_low_memory_size(); } diff --git a/arch/x86/cpu/quark/dram.c b/arch/x86/cpu/quark/dram.c index 2287dce12b5..8b1ee2d5ae5 100644 --- a/arch/x86/cpu/quark/dram.c +++ b/arch/x86/cpu/quark/dram.c @@ -184,7 +184,7 @@ int dram_init_banksize(void) * the relocation address, and how far U-Boot is moved by relocation are * set in the global data structure. */ -ulong board_get_usable_ram_top(ulong total_size) +phys_size_t board_get_usable_ram_top(phys_size_t total_size) { return gd->ram_size; } diff --git a/arch/x86/cpu/slimbootloader/sdram.c b/arch/x86/cpu/slimbootloader/sdram.c index c6f10e22e31..d748d5c7d46 100644 --- a/arch/x86/cpu/slimbootloader/sdram.c +++ b/arch/x86/cpu/slimbootloader/sdram.c @@ -48,7 +48,7 @@ static struct sbl_memory_map_info *get_memory_map_info(void) * @total_size: The memory size that u-boot occupies * Return: : The top available memory address lower than 4GB */ -ulong board_get_usable_ram_top(ulong total_size) +phys_size_t board_get_usable_ram_top(phys_size_t total_size) { struct sbl_memory_map_info *data; int i; diff --git a/arch/x86/cpu/tangier/sdram.c b/arch/x86/cpu/tangier/sdram.c index afb08476ed3..8a4b1c5d2d7 100644 --- a/arch/x86/cpu/tangier/sdram.c +++ b/arch/x86/cpu/tangier/sdram.c @@ -204,7 +204,7 @@ unsigned int install_e820_map(unsigned int max_entries, * address, and how far U-Boot is moved by relocation are set in the global * data structure. */ -ulong board_get_usable_ram_top(ulong total_size) +phys_size_t board_get_usable_ram_top(phys_size_t total_size) { struct sfi_table_simple *sb; struct sfi_mem_entry *mentry; diff --git a/arch/x86/include/asm/mrc_common.h b/arch/x86/include/asm/mrc_common.h index 3d7f00c9f92..a7f260a7079 100644 --- a/arch/x86/include/asm/mrc_common.h +++ b/arch/x86/include/asm/mrc_common.h @@ -47,7 +47,7 @@ int mrc_add_memory_area(struct memory_info *info, uint64_t start, * the relocation address, and how far U-Boot is moved by relocation are * set in the global data structure. */ -ulong mrc_common_board_get_usable_ram_top(ulong total_size); +phys_size_t mrc_common_board_get_usable_ram_top(phys_size_t total_size); void mrc_common_dram_init_banksize(void); diff --git a/arch/x86/include/asm/u-boot-x86.h b/arch/x86/include/asm/u-boot-x86.h index a1655e1cea5..4cf41e93541 100644 --- a/arch/x86/include/asm/u-boot-x86.h +++ b/arch/x86/include/asm/u-boot-x86.h @@ -77,7 +77,7 @@ int x86_cleanup_before_linux(void); void x86_enable_caches(void); void x86_disable_caches(void); int x86_init_cache(void); -ulong board_get_usable_ram_top(ulong total_size); +phys_size_t board_get_usable_ram_top(phys_size_t total_size); int default_print_cpuinfo(void); /* Set up a UART which can be used with printch(), printhex8(), etc. */ diff --git a/arch/x86/lib/fsp1/fsp_dram.c b/arch/x86/lib/fsp1/fsp_dram.c index cfd9b9f48c3..5825221d1e5 100644 --- a/arch/x86/lib/fsp1/fsp_dram.c +++ b/arch/x86/lib/fsp1/fsp_dram.c @@ -34,7 +34,7 @@ int dram_init(void) * the relocation address, and how far U-Boot is moved by relocation are * set in the global data structure. */ -ulong board_get_usable_ram_top(ulong total_size) +phys_size_t board_get_usable_ram_top(phys_size_t total_size) { return fsp_get_usable_lowmem_top(gd->arch.hob_list); } diff --git a/arch/x86/lib/fsp2/fsp_dram.c b/arch/x86/lib/fsp2/fsp_dram.c index 42d3892b762..f9ea1ab3baa 100644 --- a/arch/x86/lib/fsp2/fsp_dram.c +++ b/arch/x86/lib/fsp2/fsp_dram.c @@ -77,7 +77,7 @@ int dram_init(void) return 0; } -ulong board_get_usable_ram_top(ulong total_size) +phys_size_t board_get_usable_ram_top(phys_size_t total_size) { if (!ll_boot_init()) return gd->ram_size; |