diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/dts/Makefile | 3 | ||||
| -rw-r--r-- | arch/arm/dts/at91-sama5d27_giantboard.dts | 128 | ||||
| -rw-r--r-- | arch/arm/mach-at91/include/mach/atmel_pio4.h | 1 | ||||
| -rw-r--r-- | arch/arm/mach-at91/include/mach/sam9x60.h | 4 | ||||
| -rw-r--r-- | arch/arm/mach-at91/include/mach/sama5d3.h | 4 | ||||
| -rw-r--r-- | arch/arm/mach-at91/spl_atmel.c | 7 | ||||
| -rw-r--r-- | arch/arm/mach-exynos/include/mach/dwmmc.h | 2 |
7 files changed, 142 insertions, 7 deletions
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index a36b8c7fff9..5ff1a31b38d 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -908,7 +908,8 @@ dtb-$(CONFIG_TARGET_SAMA5D2_XPLAINED) += \ at91-sama5d2_xplained.dtb dtb-$(CONFIG_TARGET_SAMA5D27_SOM1_EK) += \ - at91-sama5d27_som1_ek.dtb + at91-sama5d27_som1_ek.dtb \ + at91-sama5d27_giantboard.dtb dtb-$(CONFIG_TARGET_SAMA5D27_WLSOM1_EK) += \ at91-sama5d27_wlsom1_ek.dtb diff --git a/arch/arm/dts/at91-sama5d27_giantboard.dts b/arch/arm/dts/at91-sama5d27_giantboard.dts new file mode 100644 index 00000000000..e81ca60ca0a --- /dev/null +++ b/arch/arm/dts/at91-sama5d27_giantboard.dts @@ -0,0 +1,128 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * at91-sama5d27_giantboard.dts - Device Tree file for Giant Board + * + * Copyright (C) 2020 Greg Gallagher <greg@embeddedgreg.com> + * + * Derived from at91-sama5d27_som1_ek.dts + * + * Copyright (C) 2017 Microchip Corporation + * Wenyou Yang <wenyou.yang@microchip.com> + */ +/dts-v1/; +#include "sama5d2.dtsi" +#include "sama5d2-pinfunc.h" + +/ { + model = "Giant Board"; + compatible = "atmel,sama5d27-giantboard", "atmel,sama5d2", "atmel,sama5"; + + memory { + reg = <0x20000000 0x8000000>; + }; + + chosen { + u-boot,dm-pre-reloc; + stdout-path = &uart1; + }; + + ahb { + sdmmc1: sdio-host@b0000000 { + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdmmc1_cmd_dat_default &pinctrl_sdmmc1_ck_cd_default>; + status = "okay"; + u-boot,dm-pre-reloc; + }; + + apb { + + uart1: serial@f8020000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; + status = "okay"; + u-boot,dm-pre-reloc; + }; + + i2c0: i2c@f8028000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0_default>; + status = "okay"; + }; + + i2c1: i2c@fc028000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_default>; + status = "okay"; + + pmic@5b { + compatible = "active-semi,act8945a"; + reg = <0x5b>; + active-semi,vsel-low; + status = "okay"; + }; + }; + + pit: timer@f8048030 { + status = "okay"; + u-boot,dm-pre-reloc; + }; + + sfr: sfr@f8030000 { + status = "okay"; + u-boot,dm-pre-reloc; + }; + + pioA: gpio@fc038000 { + pinctrl { + + pinctrl_sdmmc1_cmd_dat_default: sdmmc1_cmd_dat_default { + pinmux = <PIN_PA28__SDMMC1_CMD>, + <PIN_PA18__SDMMC1_DAT0>, + <PIN_PA19__SDMMC1_DAT1>, + <PIN_PA20__SDMMC1_DAT2>, + <PIN_PA21__SDMMC1_DAT3>; + bias-pull-up; + u-boot,dm-pre-reloc; + }; + + pinctrl_sdmmc1_ck_cd_default: sdmmc1_ck_cd_default { + pinmux = <PIN_PA22__SDMMC1_CK>, + <PIN_PA30__SDMMC1_CD>; + bias-disable; + u-boot,dm-pre-reloc; + }; + + pinctrl_uart1_default: uart1_default { + pinmux = <PIN_PD2__URXD1>, + <PIN_PD3__UTXD1>; + bias-disable; + u-boot,dm-pre-reloc; + }; + + pinctrl_i2c0_default: i2c0_default { + pinmux = <PIN_PD21__TWD0>, + <PIN_PD22__TWCK0>; + bias-disable; + }; + + pinctrl_i2c1_default: i2c1_default { + pinmux = <PIN_PD4__TWD1>, + <PIN_PD5__TWCK1>; + bias-disable; + }; + + pinctrl_usb_default: usb_default { + pinmux = <PIN_PB10__GPIO>; + bias-disable; + }; + + pinctrl_usba_vbus: usba_vbus { + pinmux = <PIN_PA31__GPIO>; + bias-disable; + }; + }; + }; + }; + }; +}; diff --git a/arch/arm/mach-at91/include/mach/atmel_pio4.h b/arch/arm/mach-at91/include/mach/atmel_pio4.h index f348b05bc85..35ac7b2d40e 100644 --- a/arch/arm/mach-at91/include/mach/atmel_pio4.h +++ b/arch/arm/mach-at91/include/mach/atmel_pio4.h @@ -52,6 +52,7 @@ struct atmel_pio4_port { #define ATMEL_PIO_DRVSTR_LO (1 << 16) #define ATMEL_PIO_DRVSTR_ME (2 << 16) #define ATMEL_PIO_DRVSTR_HI (3 << 16) +#define ATMEL_PIO_DRVSTR_OFFSET 16 #define ATMEL_PIO_CFGR_EVTSEL_MASK GENMASK(26, 24) #define ATMEL_PIO_CFGR_EVTSEL_FALLING (0 << 24) #define ATMEL_PIO_CFGR_EVTSEL_RISING (1 << 24) diff --git a/arch/arm/mach-at91/include/mach/sam9x60.h b/arch/arm/mach-at91/include/mach/sam9x60.h index b7f43226b7e..c08d19c6917 100644 --- a/arch/arm/mach-at91/include/mach/sam9x60.h +++ b/arch/arm/mach-at91/include/mach/sam9x60.h @@ -154,8 +154,8 @@ /* * PMECC table in ROM */ -#define ATMEL_PMECC_INDEX_OFFSET_512 0x8000 -#define ATMEL_PMECC_INDEX_OFFSET_1024 0x10000 +#define ATMEL_PMECC_INDEX_OFFSET_512 0x0000 +#define ATMEL_PMECC_INDEX_OFFSET_1024 0x8000 /* * SAM9X60 specific prototypes diff --git a/arch/arm/mach-at91/include/mach/sama5d3.h b/arch/arm/mach-at91/include/mach/sama5d3.h index 83f18a8148f..f4f05676f72 100644 --- a/arch/arm/mach-at91/include/mach/sama5d3.h +++ b/arch/arm/mach-at91/include/mach/sama5d3.h @@ -190,8 +190,8 @@ /* * PMECC table in ROM */ -#define ATMEL_PMECC_INDEX_OFFSET_512 0x10000 -#define ATMEL_PMECC_INDEX_OFFSET_1024 0x18000 +#define ATMEL_PMECC_INDEX_OFFSET_512 0x8000 +#define ATMEL_PMECC_INDEX_OFFSET_1024 0x10000 /* * SAMA5D3 specific prototypes diff --git a/arch/arm/mach-at91/spl_atmel.c b/arch/arm/mach-at91/spl_atmel.c index 23588e79f94..217ed12e31e 100644 --- a/arch/arm/mach-at91/spl_atmel.c +++ b/arch/arm/mach-at91/spl_atmel.c @@ -103,6 +103,13 @@ void board_init_f(ulong dummy) { int ret; + if (IS_ENABLED(CONFIG_OF_CONTROL)) { + ret = spl_early_init(); + if (ret) { + debug("spl_early_init() failed: %d\n", ret); + hang(); + } + } switch_to_main_crystal_osc(); #ifdef CONFIG_SAMA5D2 diff --git a/arch/arm/mach-exynos/include/mach/dwmmc.h b/arch/arm/mach-exynos/include/mach/dwmmc.h index 5654a0ea6b2..59c28ed54c5 100644 --- a/arch/arm/mach-exynos/include/mach/dwmmc.h +++ b/arch/arm/mach-exynos/include/mach/dwmmc.h @@ -25,5 +25,3 @@ /* CLKSEL Register */ #define DWMCI_DIVRATIO_BIT 24 #define DWMCI_DIVRATIO_MASK 0x7 - -int exynos_dwmmc_init(const void *blob); |