diff options
Diffstat (limited to 'arch')
76 files changed, 4220 insertions, 2175 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 1cd7aeb7da7..3f0e301d413 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -895,10 +895,14 @@ config ARCH_SOCFPGA select SPL_OF_CONTROL select SPL_SEPARATE_BSS if TARGET_SOCFPGA_STRATIX10 select SPL_SERIAL_SUPPORT + select SPL_SYSRESET select SPL_WATCHDOG_SUPPORT select SUPPORT_SPL select SYS_NS16550 select SYS_THUMB_BUILD if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 + select SYSRESET + select SYSRESET_SOCFPGA if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 + select SYSRESET_SOCFPGA_STRATIX10 if TARGET_SOCFPGA_STRATIX10 imply CMD_DM imply CMD_MTDPARTS imply CRC32_VERIFY diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 49d1faef323..ad4d2357bb3 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -135,7 +135,8 @@ dtb-$(CONFIG_ARCH_MESON) += \ meson-gxl-s905x-khadas-vim.dtb \ meson-gxm-khadas-vim2.dtb \ meson-axg-s400.dtb \ - meson-g12a-u200.dtb + meson-g12a-u200.dtb \ + meson-g12b-odroid-n2.dtb dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \ tegra20-medcom-wide.dtb \ tegra20-paz00.dtb \ @@ -240,6 +241,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \ zynq-zybo-z7.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += \ avnet-ultra96-rev1.dtb \ + avnet-ultrazedev-cc-v1.0-ultrazedev-som-v1.0.dtb \ zynqmp-mini.dtb \ zynqmp-mini-emmc0.dtb \ zynqmp-mini-emmc1.dtb \ @@ -253,10 +255,10 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += \ zynqmp-zcu104-revC.dtb \ zynqmp-zcu106-revA.dtb \ zynqmp-zcu111-revA.dtb \ + zynqmp-zcu1275-revA.dtb \ + zynqmp-zcu1275-revB.dtb \ zynqmp-zc1232-revA.dtb \ zynqmp-zc1254-revA.dtb \ - zynqmp-zc1275-revA.dtb \ - zynqmp-zc1275-revB.dtb \ zynqmp-zc1751-xm015-dc1.dtb \ zynqmp-zc1751-xm016-dc2.dtb \ zynqmp-zc1751-xm017-dc3.dtb \ @@ -778,7 +780,8 @@ dtb-$(CONFIG_SOC_K3_J721E) += k3-j721e-common-proc-board.dtb \ dtb-$(CONFIG_ARCH_MEDIATEK) += \ mt7623n-bananapi-bpi-r2.dtb \ - mt7629-rfb.dtb + mt7629-rfb.dtb \ + mt8516-pumpkin.dtb dtb-$(CONFIG_TARGET_GE_BX50V3) += imx6q-bx50v3.dtb dtb-$(CONFIG_TARGET_MX53PPD) += imx53-ppd.dtb diff --git a/arch/arm/dts/avnet-ultrazedev-cc-v1.0-ultrazedev-som-v1.0.dts b/arch/arm/dts/avnet-ultrazedev-cc-v1.0-ultrazedev-som-v1.0.dts new file mode 100644 index 00000000000..ac641ff1a58 --- /dev/null +++ b/arch/arm/dts/avnet-ultrazedev-cc-v1.0-ultrazedev-som-v1.0.dts @@ -0,0 +1,59 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 + +/* + * UltraZed-EV Carrier Card v1 (based on the UltraZed-EV SoM) + * http://ultrazed.org/product/ultrazed-ev-carrier-card + */ + +/dts-v1/; + +#include "avnet-ultrazedev-som-v1.0.dtsi" + +/ { + model = "Avnet UltraZed EV Carrier Card v1.0"; + compatible = "avnet,ultrazedev-cc-v1.0-ultrazedev-som-v1.0", + "xlnx,zynqmp"; + chosen { + stdout-path = "serial0:115200n8"; + xlnx,eeprom = &eeprom; + }; + aliases { + ethernet0 = &gem3; + serial0 = &uart0; + }; +}; + +&uart0 { + device_type = "serial"; + status = "okay"; +}; + +&i2c_cc { + /* Microchip 24AA025E48T-I/OT: 2K I2C Serial EEPROM with EUI-48 */ + eeprom: eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + }; + + /* IDT Versa Clock 5P49V5935B */ + vc5: clock-generator@6a { + compatible = "idt,5p49v5935"; + reg = <0x6a>; + #clock-cells = <1>; + }; +}; + +/* Ethernet RJ-45 */ +&gem3 { + status = "okay"; +}; + +/* microSD card slot */ +&sdhci1 { + status = "okay"; + xlnx,mio_bank = <1>; + clock-frequency = <199998000>; + max-frequency = <50000000>; + no-1-8-v; + disable-wp; +}; diff --git a/arch/arm/dts/avnet-ultrazedev-som-v1.0.dtsi b/arch/arm/dts/avnet-ultrazedev-som-v1.0.dtsi new file mode 100644 index 00000000000..b635db649f4 --- /dev/null +++ b/arch/arm/dts/avnet-ultrazedev-som-v1.0.dtsi @@ -0,0 +1,56 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 + +/* + * UltraZed-EV SoM v1 + * http://ultrazed.org/product/ultrazed-ev + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk-ccf.dtsi" + +/ { + model = "Avnet UltraZed EV SoM v1.0"; + compatible = "avnet,ultrazedev-som-v1.0", "xlnx,zynqmp"; + memory { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>, /* 2 GB @ offset 0 */ + <0x8 0x0 0x0 0x80000000>; /* 2 GB @ offset 32GB */ + }; +}; + +&i2c1 { + clock-frequency = <400000>; + status = "okay"; + + i2cswitch@70 { + compatible = "nxp,pca9543"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + + /* I2C connected to Carrier Card via JX3A1/JX3C1 */ + i2c_cc: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +/* Marvell 88E1512-A0-NNP2I000 Ethernet PHY */ +&gem3 { + phy-mode = "rgmii-id"; + phy-handle = <&gem3phy>; + gem3phy: ethernet-phy@0 { + reg = <0>; + }; +}; + +/* Micron MTFC8GAKAJCN-4M 8 GB eMMC */ +&sdhci0 { + status = "okay"; + xlnx,mio_bank = <0>; + clock-frequency = <199998000>; +}; diff --git a/arch/arm/dts/da850-evm-u-boot.dtsi b/arch/arm/dts/da850-evm-u-boot.dtsi index 1683f3472e4..aa42d30c720 100644 --- a/arch/arm/dts/da850-evm-u-boot.dtsi +++ b/arch/arm/dts/da850-evm-u-boot.dtsi @@ -10,6 +10,14 @@ soc@1c00000 { u-boot,dm-spl; }; + + nand { + compatible = "ti,davinci-nand"; + }; +}; + +ð0 { + pinctrl-0 = <&mii_pins>, <&mdio_pins>; }; &flash { diff --git a/arch/arm/dts/da850-lcdk-u-boot.dtsi b/arch/arm/dts/da850-lcdk-u-boot.dtsi index 80dda8ef586..541f4ca2005 100644 --- a/arch/arm/dts/da850-lcdk-u-boot.dtsi +++ b/arch/arm/dts/da850-lcdk-u-boot.dtsi @@ -9,4 +9,8 @@ aliases { i2c0 = &i2c0; }; + + nand { + compatible = "ti,davinci-nand"; + }; }; diff --git a/arch/arm/dts/imx6ull-colibri.dts b/arch/arm/dts/imx6ull-colibri.dts index 6c847ab7921..262205ac5e8 100644 --- a/arch/arm/dts/imx6ull-colibri.dts +++ b/arch/arm/dts/imx6ull-colibri.dts @@ -12,8 +12,10 @@ compatible = "toradex,colibri-imx6ull", "fsl,imx6ull"; aliases { + u-boot,dm-pre-reloc; mmc0 = &usdhc1; usb0 = &usbotg1; /* required for ums */ + display0 = &lcdif; }; chosen { @@ -156,6 +158,36 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>; + status = "okay"; + display = <&display0>; + u-boot,dm-pre-reloc; + + display0: display0 { + bits-per-pixel = <18>; + bus-width = <24>; + status = "okay"; + + display-timings { + native-mode = <&timing_vga>; + timing_vga: 640x480 { + u-boot,dm-pre-reloc; + clock-frequency = <25175000>; + hactive = <640>; + vactive = <480>; + hback-porch = <48>; + hfront-porch = <16>; + vback-porch = <33>; + vfront-porch = <10>; + hsync-len = <96>; + vsync-len = <2>; + + de-active = <1>; + hsync-active = <0>; + vsync-active = <0>; + pixelclk-active = <0>; + }; + }; + }; }; /* PWM <A> */ diff --git a/arch/arm/dts/imx7-colibri.dtsi b/arch/arm/dts/imx7-colibri.dtsi index 81717c233d1..308e0b2a63f 100644 --- a/arch/arm/dts/imx7-colibri.dtsi +++ b/arch/arm/dts/imx7-colibri.dtsi @@ -113,29 +113,34 @@ }; &lcdif { - u-boot,dm-pre-reloc; status = "okay"; + display = <&display0>; + u-boot,dm-pre-reloc; - display-timings { - native-mode = <&timing_vga>; - - /* Standard VGA timing */ - timing_vga: 640x480 { - u-boot,dm-pre-reloc; - clock-frequency = <25175000>; - hactive = <640>; - vactive = <480>; - hback-porch = <48>; - hfront-porch = <16>; - vback-porch = <33>; - vfront-porch = <10>; - hsync-len = <96>; - vsync-len = <2>; - - de-active = <1>; - hsync-active = <0>; - vsync-active = <0>; - pixelclk-active = <0>; + display0: display0 { + bits-per-pixel = <18>; + bus-width = <24>; + status = "okay"; + + display-timings { + native-mode = <&timing_vga>; + timing_vga: 640x480 { + u-boot,dm-pre-reloc; + clock-frequency = <25175000>; + hactive = <640>; + vactive = <480>; + hback-porch = <48>; + hfront-porch = <16>; + vback-porch = <33>; + vfront-porch = <10>; + hsync-len = <96>; + vsync-len = <2>; + + de-active = <1>; + hsync-active = <0>; + vsync-active = <0>; + pixelclk-active = <0>; + }; }; }; }; diff --git a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi index 8a9d147ffa3..8589f76d234 100644 --- a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi +++ b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi @@ -98,7 +98,7 @@ dma-coherent; clocks = <&k3_clks 5 10>; clock-names = "fck"; - power-domains = <&k3_pds 5>; + power-domains = <&k3_pds 5 TI_SCI_PD_EXCLUSIVE>; ti,psil-base = <0x7000>; dmas = <&mcu_udmap &mcu_cpsw 0 UDMA_DIR_TX>, diff --git a/arch/arm/dts/meson-g12a-u-boot.dtsi b/arch/arm/dts/meson-g12a-u-boot.dtsi deleted file mode 100644 index 8e0c81f1999..00000000000 --- a/arch/arm/dts/meson-g12a-u-boot.dtsi +++ /dev/null @@ -1,216 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 BayLibre, SAS. - * Author: Neil Armstrong <narmstrong@baylibre.com> - */ - -/ { - soc { - ethmac: ethernet@ff3f0000 { - compatible = "amlogic,meson-axg-dwmac", "snps,dwmac-3.710", - "snps,dwmac"; - reg = <0x0 0xff3f0000 0x0 0x10000 - 0x0 0xff634540 0x0 0x8>; - interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq"; - clocks = <&clkc CLKID_ETH>, - <&clkc CLKID_FCLK_DIV2>, - <&clkc CLKID_MPLL2>; - clock-names = "stmmaceth", "clkin0", "clkin1"; - status = "disabled"; - - mdio0: mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,dwmac-mdio"; - }; - }; - - sd_emmc_a: sd@ffe03000 { - compatible = "amlogic,meson-axg-mmc"; - reg = <0x0 0xffe03000 0x0 0x800>; - interrupts = <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - clocks = <&clkc CLKID_SD_EMMC_A>, - <&clkc CLKID_SD_EMMC_A_CLK0>, - <&clkc CLKID_FCLK_DIV2>; - clock-names = "core", "clkin0", "clkin1"; - resets = <&reset RESET_SD_EMMC_A>; - }; - - sd_emmc_b: sd@ffe05000 { - compatible = "amlogic,meson-axg-mmc"; - reg = <0x0 0xffe05000 0x0 0x800>; - interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - clocks = <&clkc CLKID_SD_EMMC_B>, - <&clkc CLKID_SD_EMMC_B_CLK0>, - <&clkc CLKID_FCLK_DIV2>; - clock-names = "core", "clkin0", "clkin1"; - resets = <&reset RESET_SD_EMMC_B>; - }; - - sd_emmc_c: mmc@ffe07000 { - compatible = "amlogic,meson-axg-mmc"; - reg = <0x0 0xffe07000 0x0 0x800>; - interrupts = <GIC_SPI 191 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - clocks = <&clkc CLKID_SD_EMMC_C>, - <&clkc CLKID_SD_EMMC_C_CLK0>, - <&clkc CLKID_FCLK_DIV2>; - clock-names = "core", "clkin0", "clkin1"; - resets = <&reset RESET_SD_EMMC_C>; - }; - }; -}; - -&periphs_pinctrl { - emmc_pins: emmc { - mux { - groups = "emmc_nand_d0", - "emmc_nand_d1", - "emmc_nand_d2", - "emmc_nand_d3", - "emmc_nand_d4", - "emmc_nand_d5", - "emmc_nand_d6", - "emmc_nand_d7", - "emmc_clk", - "emmc_cmd"; - function = "emmc"; - bias-pull-up; - }; - }; - - emmc_ds_pins: emmc-ds { - mux { - groups = "emmc_nand_ds"; - function = "emmc"; - bias-pull-down; - }; - }; - - emmc_clk_gate_pins: emmc_clk_gate { - mux { - groups = "BOOT_8"; - function = "gpio_periphs"; - bias-pull-down; - }; - }; - - eth_leds_pins: eth-leds { - mux { - groups = "eth_link_led", - "eth_act_led"; - function = "eth"; - bias-disable; - }; - }; - - eth_rmii_pins: eth-rmii { - mux { - groups = "eth_mdio", - "eth_mdc", - "eth_rgmii_rx_clk", - "eth_rx_dv", - "eth_rxd0", - "eth_rxd1", - "eth_txen", - "eth_txd0", - "eth_txd1"; - function = "eth"; - bias-disable; - }; - }; - - eth_rgmii_pins: eth-rgmii { - mux { - groups = "eth_rxd2_rgmii", - "eth_rxd3_rgmii", - "eth_rgmii_tx_clk", - "eth_txd2_rgmii", - "eth_txd3_rgmii"; - function = "eth"; - bias-disable; - }; - }; - - sdcard_c_pins: sdcard_c { - mux { - groups = "sdcard_d0_c", - "sdcard_d1_c", - "sdcard_d2_c", - "sdcard_d3_c", - "sdcard_cmd_c", - "sdcard_clk_c"; - function = "sdcard"; - bias-pull-up; - }; - }; - - sdcard_clk_gate_c_pins: sdcard_clk_gate_c { - mux { - groups = "GPIOC_4"; - function = "gpio_periphs"; - bias-pull-down; - }; - }; - - sdcard_z_pins: sdcard_z { - mux { - groups = "sdcard_d0_z", - "sdcard_d1_z", - "sdcard_d2_z", - "sdcard_d3_z", - "sdcard_cmd_z", - "sdcard_clk_z"; - function = "sdcard"; - bias-pull-up; - }; - }; - - sdcard_clk_gate_z_pins: sdcard_clk_gate_z { - mux { - groups = "GPIOZ_6"; - function = "gpio_periphs"; - bias-pull-down; - }; - }; -}; - -&periphs { - eth_phy: mdio-multiplexer@4c000 { - compatible = "amlogic,g12a-mdio-mux"; - reg = <0x0 0x4c000 0x0 0xa4>; - clocks = <&clkc CLKID_ETH_PHY>, - <&xtal>, - <&clkc CLKID_MPLL_5OM>; - clock-names = "pclk", "clkin0", "clkin1"; - mdio-parent-bus = <&mdio0>; - #address-cells = <1>; - #size-cells = <0>; - - ext_mdio: mdio@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - }; - - int_mdio: mdio@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - - internal_ephy: ethernet_phy@8 { - compatible = "ethernet-phy-id0180.3300", - "ethernet-phy-ieee802.3-c22"; - reg = <8>; - max-speed = <100>; - - /* FIXME: Add irq support */ - }; - }; - }; -}; - - diff --git a/arch/arm/dts/meson-g12a-u200-u-boot.dtsi b/arch/arm/dts/meson-g12a-u200-u-boot.dtsi deleted file mode 100644 index 9486ab0c47e..00000000000 --- a/arch/arm/dts/meson-g12a-u200-u-boot.dtsi +++ /dev/null @@ -1,63 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 BayLibre, SAS. - * Author: Neil Armstrong <narmstrong@baylibre.com> - */ - -#include "meson-g12a-u-boot.dtsi" - - / { - aliases { - ethernet0 = ðmac; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; - }; -}; - -ðmac { - status = "okay"; - pinctrl-0 = <ð_leds_pins>; - pinctrl-names = "default"; - phy-handle = <&internal_ephy>; - phy-mode = "rmii"; -}; - - -/* SD card */ -&sd_emmc_b { - status = "okay"; - pinctrl-0 = <&sdcard_c_pins>; - pinctrl-1 = <&sdcard_clk_gate_c_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <50000000>; - disable-wp; - - cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddao_3v3>; -}; - -/* eMMC */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - max-frequency = <200000000>; - disable-wp; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&flash_1v8>; -}; diff --git a/arch/arm/dts/meson-g12a-u200.dts b/arch/arm/dts/meson-g12a-u200.dts index 0e8045b8a91..8551fbd4a48 100644 --- a/arch/arm/dts/meson-g12a-u200.dts +++ b/arch/arm/dts/meson-g12a-u200.dts @@ -15,14 +15,12 @@ aliases { serial0 = &uart_AO; + ethernet0 = ðmac; }; + chosen { stdout-path = "serial0:115200n8"; }; - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x40000000>; - }; cvbs-connector { compatible = "composite-video-connector"; @@ -34,13 +32,9 @@ }; }; - flash_1v8: regulator-flash_1v8 { - compatible = "regulator-fixed"; - regulator-name = "FLASH_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - regulator-always-on; + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; }; hdmi-connector { @@ -54,6 +48,20 @@ }; }; + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + flash_1v8: regulator-flash_1v8 { + compatible = "regulator-fixed"; + regulator-name = "FLASH_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + main_12v: regulator-main_12v { compatible = "regulator-fixed"; regulator-name = "12V"; @@ -62,6 +70,17 @@ regulator-always-on; }; + usb_pwr_en: regulator-usb_pwr_en { + compatible = "regulator-fixed"; + regulator-name = "USB_PWR_EN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v>; + + gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + vcc_1v8: regulator-vcc_1v8 { compatible = "regulator-fixed"; regulator-name = "VCC_1V8"; @@ -92,17 +111,6 @@ enable-active-high; }; - usb_pwr_en: regulator-usb_pwr_en { - compatible = "regulator-fixed"; - regulator-name = "USB_PWR_EN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc_5v>; - - gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - vddao_1v8: regulator-vddao_1v8 { compatible = "regulator-fixed"; regulator-name = "VDDAO_1V8"; @@ -143,6 +151,12 @@ }; }; +ðmac { + status = "okay"; + phy-handle = <&internal_ephy>; + phy-mode = "rmii"; +}; + &hdmi_tx { status = "okay"; pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; @@ -156,6 +170,70 @@ }; }; +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +/* i2c Touch */ +&i2c0 { + status = "okay"; + pinctrl-0 = <&i2c0_sda_z0_pins>, <&i2c0_sck_z1_pins>; + pinctrl-names = "default"; +}; + +/* i2c CM */ +&i2c2 { + status = "okay"; + pinctrl-0 = <&i2c2_sda_z_pins>, <&i2c2_sck_z_pins>; + pinctrl-names = "default"; +}; + +/* i2c Audio */ +&i2c3 { + status = "okay"; + pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; + pinctrl-names = "default"; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_3v3>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + non-removable; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&flash_1v8>; +}; + &uart_AO { status = "okay"; pinctrl-0 = <&uart_ao_a_pins>; diff --git a/arch/arm/dts/meson-g12a.dtsi b/arch/arm/dts/meson-g12a.dtsi index 9f72396ba71..f8d43e3dcf2 100644 --- a/arch/arm/dts/meson-g12a.dtsi +++ b/arch/arm/dts/meson-g12a.dtsi @@ -5,10 +5,12 @@ #include <dt-bindings/phy/phy.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/axg-audio-clkc.h> #include <dt-bindings/clock/g12a-clkc.h> #include <dt-bindings/clock/g12a-aoclkc.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h> #include <dt-bindings/reset/amlogic,meson-g12a-reset.h> / { @@ -18,6 +20,39 @@ #address-cells = <2>; #size-cells = <2>; + tdmif_a: audio-controller-0 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_A"; + clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>, + <&clkc_audio AUD_CLKID_MST_A_SCLK>, + <&clkc_audio AUD_CLKID_MST_A_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; + + tdmif_b: audio-controller-1 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_B"; + clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>, + <&clkc_audio AUD_CLKID_MST_B_SCLK>, + <&clkc_audio AUD_CLKID_MST_B_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; + + tdmif_c: audio-controller-2 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_C"; + clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>, + <&clkc_audio AUD_CLKID_MST_C_SCLK>, + <&clkc_audio AUD_CLKID_MST_C_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; + cpus { #address-cells = <0x2>; #size-cells = <0x0>; @@ -102,6 +137,27 @@ #size-cells = <2>; ranges; + ethmac: ethernet@ff3f0000 { + compatible = "amlogic,meson-axg-dwmac", + "snps,dwmac-3.70a", + "snps,dwmac"; + reg = <0x0 0xff3f0000 0x0 0x10000 + 0x0 0xff634540 0x0 0x8>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + clocks = <&clkc CLKID_ETH>, + <&clkc CLKID_FCLK_DIV2>, + <&clkc CLKID_MPLL2>; + clock-names = "stmmaceth", "clkin0", "clkin1"; + status = "disabled"; + + mdio0: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + }; + }; + apb: bus@ff600000 { compatible = "simple-bus"; reg = <0x0 0xff600000 0x0 0x200000>; @@ -123,6 +179,7 @@ clock-names = "isfr", "iahb", "venci"; #address-cells = <1>; #size-cells = <0>; + #sound-dai-cells = <0>; status = "disabled"; /* VPU VENC Input */ @@ -140,6 +197,19 @@ }; }; + apb_efuse: bus@30000 { + compatible = "simple-bus"; + reg = <0x0 0x30000 0x0 0x2000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x30000 0x0 0x2000>; + + hwrng: rng@218 { + compatible = "amlogic,meson-rng"; + reg = <0x0 0x218 0x0 0x4>; + }; + }; + periphs: bus@34400 { compatible = "simple-bus"; reg = <0x0 0x34400 0x0 0x400>; @@ -185,12 +255,55 @@ }; }; + emmc_pins: emmc { + mux-0 { + groups = "emmc_nand_d0", + "emmc_nand_d1", + "emmc_nand_d2", + "emmc_nand_d3", + "emmc_nand_d4", + "emmc_nand_d5", + "emmc_nand_d6", + "emmc_nand_d7", + "emmc_cmd"; + function = "emmc"; + bias-pull-up; + drive-strength-microamp = <4000>; + }; + + mux-1 { + groups = "emmc_clk"; + function = "emmc"; + bias-disable; + drive-strength-microamp = <4000>; + }; + }; + + emmc_ds_pins: emmc-ds { + mux { + groups = "emmc_nand_ds"; + function = "emmc"; + bias-pull-down; + drive-strength-microamp = <4000>; + }; + }; + + emmc_clk_gate_pins: emmc_clk_gate { + mux { + groups = "BOOT_8"; + function = "gpio_periphs"; + bias-pull-down; + drive-strength-microamp = <4000>; + }; + }; + hdmitx_ddc_pins: hdmitx_ddc { mux { groups = "hdmitx_sda", "hdmitx_sck"; function = "hdmitx"; bias-disable; + drive-strength-microamp = <4000>; }; }; @@ -202,6 +315,1040 @@ }; }; + + i2c0_sda_c_pins: i2c0-sda-c { + mux { + groups = "i2c0_sda_c"; + function = "i2c0"; + bias-disable; + drive-strength-microamp = <3000>; + + }; + }; + + i2c0_sck_c_pins: i2c0-sck-c { + mux { + groups = "i2c0_sck_c"; + function = "i2c0"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c0_sda_z0_pins: i2c0-sda-z0 { + mux { + groups = "i2c0_sda_z0"; + function = "i2c0"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c0_sck_z1_pins: i2c0-sck-z1 { + mux { + groups = "i2c0_sck_z1"; + function = "i2c0"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c0_sda_z7_pins: i2c0-sda-z7 { + mux { + groups = "i2c0_sda_z7"; + function = "i2c0"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c0_sda_z8_pins: i2c0-sda-z8 { + mux { + groups = "i2c0_sda_z8"; + function = "i2c0"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_sda_x_pins: i2c1-sda-x { + mux { + groups = "i2c1_sda_x"; + function = "i2c1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_sck_x_pins: i2c1-sck-x { + mux { + groups = "i2c1_sck_x"; + function = "i2c1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_sda_h2_pins: i2c1-sda-h2 { + mux { + groups = "i2c1_sda_h2"; + function = "i2c1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_sck_h3_pins: i2c1-sck-h3 { + mux { + groups = "i2c1_sck_h3"; + function = "i2c1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_sda_h6_pins: i2c1-sda-h6 { + mux { + groups = "i2c1_sda_h6"; + function = "i2c1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_sck_h7_pins: i2c1-sck-h7 { + mux { + groups = "i2c1_sck_h7"; + function = "i2c1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c2_sda_x_pins: i2c2-sda-x { + mux { + groups = "i2c2_sda_x"; + function = "i2c2"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c2_sck_x_pins: i2c2-sck-x { + mux { + groups = "i2c2_sck_x"; + function = "i2c2"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c2_sda_z_pins: i2c2-sda-z { + mux { + groups = "i2c2_sda_z"; + function = "i2c2"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c2_sck_z_pins: i2c2-sck-z { + mux { + groups = "i2c2_sck_z"; + function = "i2c2"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c3_sda_h_pins: i2c3-sda-h { + mux { + groups = "i2c3_sda_h"; + function = "i2c3"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c3_sck_h_pins: i2c3-sck-h { + mux { + groups = "i2c3_sck_h"; + function = "i2c3"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c3_sda_a_pins: i2c3-sda-a { + mux { + groups = "i2c3_sda_a"; + function = "i2c3"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c3_sck_a_pins: i2c3-sck-a { + mux { + groups = "i2c3_sck_a"; + function = "i2c3"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + mclk0_a_pins: mclk0-a { + mux { + groups = "mclk0_a"; + function = "mclk0"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + mclk1_a_pins: mclk1-a { + mux { + groups = "mclk1_a"; + function = "mclk1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + mclk1_x_pins: mclk1-x { + mux { + groups = "mclk1_x"; + function = "mclk1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + mclk1_z_pins: mclk1-z { + mux { + groups = "mclk1_z"; + function = "mclk1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + pdm_din0_a_pins: pdm-din0-a { + mux { + groups = "pdm_din0_a"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din0_c_pins: pdm-din0-c { + mux { + groups = "pdm_din0_c"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din0_x_pins: pdm-din0-x { + mux { + groups = "pdm_din0_x"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din0_z_pins: pdm-din0-z { + mux { + groups = "pdm_din0_z"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din1_a_pins: pdm-din1-a { + mux { + groups = "pdm_din1_a"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din1_c_pins: pdm-din1-c { + mux { + groups = "pdm_din1_c"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din1_x_pins: pdm-din1-x { + mux { + groups = "pdm_din1_x"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din1_z_pins: pdm-din1-z { + mux { + groups = "pdm_din1_z"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din2_a_pins: pdm-din2-a { + mux { + groups = "pdm_din2_a"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din2_c_pins: pdm-din2-c { + mux { + groups = "pdm_din2_c"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din2_x_pins: pdm-din2-x { + mux { + groups = "pdm_din2_x"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din2_z_pins: pdm-din2-z { + mux { + groups = "pdm_din2_z"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din3_a_pins: pdm-din3-a { + mux { + groups = "pdm_din3_a"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din3_c_pins: pdm-din3-c { + mux { + groups = "pdm_din3_c"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din3_x_pins: pdm-din3-x { + mux { + groups = "pdm_din3_x"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din3_z_pins: pdm-din3-z { + mux { + groups = "pdm_din3_z"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_dclk_a_pins: pdm-dclk-a { + mux { + groups = "pdm_dclk_a"; + function = "pdm"; + bias-disable; + drive-strength-microamp = <500>; + }; + }; + + pdm_dclk_c_pins: pdm-dclk-c { + mux { + groups = "pdm_dclk_c"; + function = "pdm"; + bias-disable; + drive-strength-microamp = <500>; + }; + }; + + pdm_dclk_x_pins: pdm-dclk-x { + mux { + groups = "pdm_dclk_x"; + function = "pdm"; + bias-disable; + drive-strength-microamp = <500>; + }; + }; + + pdm_dclk_z_pins: pdm-dclk-z { + mux { + groups = "pdm_dclk_z"; + function = "pdm"; + bias-disable; + drive-strength-microamp = <500>; + }; + }; + + pwm_a_pins: pwm-a { + mux { + groups = "pwm_a"; + function = "pwm_a"; + bias-disable; + }; + }; + + pwm_b_x7_pins: pwm-b-x7 { + mux { + groups = "pwm_b_x7"; + function = "pwm_b"; + bias-disable; + }; + }; + + pwm_b_x19_pins: pwm-b-x19 { + mux { + groups = "pwm_b_x19"; + function = "pwm_b"; + bias-disable; + }; + }; + + pwm_c_c_pins: pwm-c-c { + mux { + groups = "pwm_c_c"; + function = "pwm_c"; + bias-disable; + }; + }; + + pwm_c_x5_pins: pwm-c-x5 { + mux { + groups = "pwm_c_x5"; + function = "pwm_c"; + bias-disable; + }; + }; + + pwm_c_x8_pins: pwm-c-x8 { + mux { + groups = "pwm_c_x8"; + function = "pwm_c"; + bias-disable; + }; + }; + + pwm_d_x3_pins: pwm-d-x3 { + mux { + groups = "pwm_d_x3"; + function = "pwm_d"; + bias-disable; + }; + }; + + pwm_d_x6_pins: pwm-d-x6 { + mux { + groups = "pwm_d_x6"; + function = "pwm_d"; + bias-disable; + }; + }; + + pwm_e_pins: pwm-e { + mux { + groups = "pwm_e"; + function = "pwm_e"; + bias-disable; + }; + }; + + pwm_f_x_pins: pwm-f-x { + mux { + groups = "pwm_f_x"; + function = "pwm_f"; + bias-disable; + }; + }; + + pwm_f_h_pins: pwm-f-h { + mux { + groups = "pwm_f_h"; + function = "pwm_f"; + bias-disable; + }; + }; + + sdcard_c_pins: sdcard_c { + mux-0 { + groups = "sdcard_d0_c", + "sdcard_d1_c", + "sdcard_d2_c", + "sdcard_d3_c", + "sdcard_cmd_c"; + function = "sdcard"; + bias-pull-up; + drive-strength-microamp = <4000>; + }; + + mux-1 { + groups = "sdcard_clk_c"; + function = "sdcard"; + bias-disable; + drive-strength-microamp = <4000>; + }; + }; + + sdcard_clk_gate_c_pins: sdcard_clk_gate_c { + mux { + groups = "GPIOC_4"; + function = "gpio_periphs"; + bias-pull-down; + drive-strength-microamp = <4000>; + }; + }; + + sdcard_z_pins: sdcard_z { + mux-0 { + groups = "sdcard_d0_z", + "sdcard_d1_z", + "sdcard_d2_z", + "sdcard_d3_z", + "sdcard_cmd_z"; + function = "sdcard"; + bias-pull-up; + drive-strength-microamp = <4000>; + }; + + mux-1 { + groups = "sdcard_clk_z"; + function = "sdcard"; + bias-disable; + drive-strength-microamp = <4000>; + }; + }; + + sdcard_clk_gate_z_pins: sdcard_clk_gate_z { + mux { + groups = "GPIOZ_6"; + function = "gpio_periphs"; + bias-pull-down; + drive-strength-microamp = <4000>; + }; + }; + + sdio_pins: sdio { + mux { + groups = "sdio_d0", + "sdio_d1", + "sdio_d2", + "sdio_d3", + "sdio_clk", + "sdio_cmd"; + function = "sdio"; + bias-disable; + drive-strength-microamp = <4000>; + }; + }; + + sdio_clk_gate_pins: sdio_clk_gate { + mux { + groups = "GPIOX_4"; + function = "gpio_periphs"; + bias-pull-down; + drive-strength-microamp = <4000>; + }; + }; + + spdif_in_a10_pins: spdif-in-a10 { + mux { + groups = "spdif_in_a10"; + function = "spdif_in"; + bias-disable; + }; + }; + + spdif_in_a12_pins: spdif-in-a12 { + mux { + groups = "spdif_in_a12"; + function = "spdif_in"; + bias-disable; + }; + }; + + spdif_in_h_pins: spdif-in-h { + mux { + groups = "spdif_in_h"; + function = "spdif_in"; + bias-disable; + }; + }; + + spdif_out_h_pins: spdif-out-h { + mux { + groups = "spdif_out_h"; + function = "spdif_out"; + drive-strength-microamp = <500>; + bias-disable; + }; + }; + + spdif_out_a11_pins: spdif-out-a11 { + mux { + groups = "spdif_out_a11"; + function = "spdif_out"; + drive-strength-microamp = <500>; + bias-disable; + }; + }; + + spdif_out_a13_pins: spdif-out-a13 { + mux { + groups = "spdif_out_a13"; + function = "spdif_out"; + drive-strength-microamp = <500>; + bias-disable; + }; + }; + + tdm_a_din0_pins: tdm-a-din0 { + mux { + groups = "tdm_a_din0"; + function = "tdm_a"; + bias-disable; + }; + }; + + + tdm_a_din1_pins: tdm-a-din1 { + mux { + groups = "tdm_a_din1"; + function = "tdm_a"; + bias-disable; + }; + }; + + tdm_a_dout0_pins: tdm-a-dout0 { + mux { + groups = "tdm_a_dout0"; + function = "tdm_a"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_a_dout1_pins: tdm-a-dout1 { + mux { + groups = "tdm_a_dout1"; + function = "tdm_a"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_a_fs_pins: tdm-a-fs { + mux { + groups = "tdm_a_fs"; + function = "tdm_a"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_a_sclk_pins: tdm-a-sclk { + mux { + groups = "tdm_a_sclk"; + function = "tdm_a"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_a_slv_fs_pins: tdm-a-slv-fs { + mux { + groups = "tdm_a_slv_fs"; + function = "tdm_a"; + bias-disable; + }; + }; + + + tdm_a_slv_sclk_pins: tdm-a-slv-sclk { + mux { + groups = "tdm_a_slv_sclk"; + function = "tdm_a"; + bias-disable; + }; + }; + + tdm_b_din0_pins: tdm-b-din0 { + mux { + groups = "tdm_b_din0"; + function = "tdm_b"; + bias-disable; + }; + }; + + tdm_b_din1_pins: tdm-b-din1 { + mux { + groups = "tdm_b_din1"; + function = "tdm_b"; + bias-disable; + }; + }; + + tdm_b_din2_pins: tdm-b-din2 { + mux { + groups = "tdm_b_din2"; + function = "tdm_b"; + bias-disable; + }; + }; + + tdm_b_din3_a_pins: tdm-b-din3-a { + mux { + groups = "tdm_b_din3_a"; + function = "tdm_b"; + bias-disable; + }; + }; + + tdm_b_din3_h_pins: tdm-b-din3-h { + mux { + groups = "tdm_b_din3_h"; + function = "tdm_b"; + bias-disable; + }; + }; + + tdm_b_dout0_pins: tdm-b-dout0 { + mux { + groups = "tdm_b_dout0"; + function = "tdm_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_b_dout1_pins: tdm-b-dout1 { + mux { + groups = "tdm_b_dout1"; + function = "tdm_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_b_dout2_pins: tdm-b-dout2 { + mux { + groups = "tdm_b_dout2"; + function = "tdm_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_b_dout3_a_pins: tdm-b-dout3-a { + mux { + groups = "tdm_b_dout3_a"; + function = "tdm_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_b_dout3_h_pins: tdm-b-dout3-h { + mux { + groups = "tdm_b_dout3_h"; + function = "tdm_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_b_fs_pins: tdm-b-fs { + mux { + groups = "tdm_b_fs"; + function = "tdm_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_b_sclk_pins: tdm-b-sclk { + mux { + groups = "tdm_b_sclk"; + function = "tdm_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_b_slv_fs_pins: tdm-b-slv-fs { + mux { + groups = "tdm_b_slv_fs"; + function = "tdm_b"; + bias-disable; + }; + }; + + tdm_b_slv_sclk_pins: tdm-b-slv-sclk { + mux { + groups = "tdm_b_slv_sclk"; + function = "tdm_b"; + bias-disable; + }; + }; + + tdm_c_din0_a_pins: tdm-c-din0-a { + mux { + groups = "tdm_c_din0_a"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_din0_z_pins: tdm-c-din0-z { + mux { + groups = "tdm_c_din0_z"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_din1_a_pins: tdm-c-din1-a { + mux { + groups = "tdm_c_din1_a"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_din1_z_pins: tdm-c-din1-z { + mux { + groups = "tdm_c_din1_z"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_din2_a_pins: tdm-c-din2-a { + mux { + groups = "tdm_c_din2_a"; + function = "tdm_c"; + bias-disable; + }; + }; + + eth_leds_pins: eth-leds { + mux { + groups = "eth_link_led", + "eth_act_led"; + function = "eth"; + bias-disable; + }; + }; + + eth_pins: eth { + mux { + groups = "eth_mdio", + "eth_mdc", + "eth_rgmii_rx_clk", + "eth_rx_dv", + "eth_rxd0", + "eth_rxd1", + "eth_txen", + "eth_txd0", + "eth_txd1"; + function = "eth"; + drive-strength-microamp = <4000>; + bias-disable; + }; + }; + + eth_rgmii_pins: eth-rgmii { + mux { + groups = "eth_rxd2_rgmii", + "eth_rxd3_rgmii", + "eth_rgmii_tx_clk", + "eth_txd2_rgmii", + "eth_txd3_rgmii"; + function = "eth"; + drive-strength-microamp = <4000>; + bias-disable; + }; + }; + + tdm_c_din2_z_pins: tdm-c-din2-z { + mux { + groups = "tdm_c_din2_z"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_din3_a_pins: tdm-c-din3-a { + mux { + groups = "tdm_c_din3_a"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_din3_z_pins: tdm-c-din3-z { + mux { + groups = "tdm_c_din3_z"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_dout0_a_pins: tdm-c-dout0-a { + mux { + groups = "tdm_c_dout0_a"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_dout0_z_pins: tdm-c-dout0-z { + mux { + groups = "tdm_c_dout0_z"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_dout1_a_pins: tdm-c-dout1-a { + mux { + groups = "tdm_c_dout1_a"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_dout1_z_pins: tdm-c-dout1-z { + mux { + groups = "tdm_c_dout1_z"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_dout2_a_pins: tdm-c-dout2-a { + mux { + groups = "tdm_c_dout2_a"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_dout2_z_pins: tdm-c-dout2-z { + mux { + groups = "tdm_c_dout2_z"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_dout3_a_pins: tdm-c-dout3-a { + mux { + groups = "tdm_c_dout3_a"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_dout3_z_pins: tdm-c-dout3-z { + mux { + groups = "tdm_c_dout3_z"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_fs_a_pins: tdm-c-fs-a { + mux { + groups = "tdm_c_fs_a"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_fs_z_pins: tdm-c-fs-z { + mux { + groups = "tdm_c_fs_z"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_sclk_a_pins: tdm-c-sclk-a { + mux { + groups = "tdm_c_sclk_a"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_sclk_z_pins: tdm-c-sclk-z { + mux { + groups = "tdm_c_sclk_z"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_slv_fs_a_pins: tdm-c-slv-fs-a { + mux { + groups = "tdm_c_slv_fs_a"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_slv_fs_z_pins: tdm-c-slv-fs-z { + mux { + groups = "tdm_c_slv_fs_z"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_slv_sclk_a_pins: tdm-c-slv-sclk-a { + mux { + groups = "tdm_c_slv_sclk_a"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_slv_sclk_z_pins: tdm-c-slv-sclk-z { + mux { + groups = "tdm_c_slv_sclk_z"; + function = "tdm_c"; + bias-disable; + }; + }; + uart_a_pins: uart-a { mux { groups = "uart_a_tx", @@ -303,6 +1450,282 @@ }; }; + pdm: audio-controller@40000 { + compatible = "amlogic,g12a-pdm", + "amlogic,axg-pdm"; + reg = <0x0 0x40000 0x0 0x34>; + #sound-dai-cells = <0>; + sound-name-prefix = "PDM"; + clocks = <&clkc_audio AUD_CLKID_PDM>, + <&clkc_audio AUD_CLKID_PDM_DCLK>, + <&clkc_audio AUD_CLKID_PDM_SYSCLK>; + clock-names = "pclk", "dclk", "sysclk"; + status = "disabled"; + }; + + audio: bus@42000 { + compatible = "simple-bus"; + reg = <0x0 0x42000 0x0 0x2000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x42000 0x0 0x2000>; + + clkc_audio: clock-controller@0 { + status = "disabled"; + compatible = "amlogic,g12a-audio-clkc"; + reg = <0x0 0x0 0x0 0xb4>; + #clock-cells = <1>; + + clocks = <&clkc CLKID_AUDIO>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL3>, + <&clkc CLKID_HIFI_PLL>, + <&clkc CLKID_FCLK_DIV3>, + <&clkc CLKID_FCLK_DIV4>, + <&clkc CLKID_GP0_PLL>; + clock-names = "pclk", + "mst_in0", + "mst_in1", + "mst_in2", + "mst_in3", + "mst_in4", + "mst_in5", + "mst_in6", + "mst_in7"; + + resets = <&reset RESET_AUDIO>; + }; + + toddr_a: audio-controller@100 { + compatible = "amlogic,g12a-toddr", + "amlogic,axg-toddr"; + reg = <0x0 0x100 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_A"; + interrupts = <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_TODDR_A>; + resets = <&arb AXG_ARB_TODDR_A>; + status = "disabled"; + }; + + toddr_b: audio-controller@140 { + compatible = "amlogic,g12a-toddr", + "amlogic,axg-toddr"; + reg = <0x0 0x140 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_B"; + interrupts = <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_TODDR_B>; + resets = <&arb AXG_ARB_TODDR_B>; + status = "disabled"; + }; + + toddr_c: audio-controller@180 { + compatible = "amlogic,g12a-toddr", + "amlogic,axg-toddr"; + reg = <0x0 0x180 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_C"; + interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_TODDR_C>; + resets = <&arb AXG_ARB_TODDR_C>; + status = "disabled"; + }; + + frddr_a: audio-controller@1c0 { + compatible = "amlogic,g12a-frddr", + "amlogic,axg-frddr"; + reg = <0x0 0x1c0 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_A"; + interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_FRDDR_A>; + resets = <&arb AXG_ARB_FRDDR_A>; + status = "disabled"; + }; + + frddr_b: audio-controller@200 { + compatible = "amlogic,g12a-frddr", + "amlogic,axg-frddr"; + reg = <0x0 0x200 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_B"; + interrupts = <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_FRDDR_B>; + resets = <&arb AXG_ARB_FRDDR_B>; + status = "disabled"; + }; + + frddr_c: audio-controller@240 { + compatible = "amlogic,g12a-frddr", + "amlogic,axg-frddr"; + reg = <0x0 0x240 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_C"; + interrupts = <GIC_SPI 154 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_FRDDR_C>; + resets = <&arb AXG_ARB_FRDDR_C>; + status = "disabled"; + }; + + arb: reset-controller@280 { + status = "disabled"; + compatible = "amlogic,meson-axg-audio-arb"; + reg = <0x0 0x280 0x0 0x4>; + #reset-cells = <1>; + clocks = <&clkc_audio AUD_CLKID_DDR_ARB>; + }; + + tdmin_a: audio-controller@300 { + compatible = "amlogic,g12a-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x300 0x0 0x40>; + sound-name-prefix = "TDMIN_A"; + clocks = <&clkc_audio AUD_CLKID_TDMIN_A>, + <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_b: audio-controller@340 { + compatible = "amlogic,g12a-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x340 0x0 0x40>; + sound-name-prefix = "TDMIN_B"; + clocks = <&clkc_audio AUD_CLKID_TDMIN_B>, + <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_c: audio-controller@380 { + compatible = "amlogic,g12a-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x380 0x0 0x40>; + sound-name-prefix = "TDMIN_C"; + clocks = <&clkc_audio AUD_CLKID_TDMIN_C>, + <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_lb: audio-controller@3c0 { + compatible = "amlogic,g12a-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x3c0 0x0 0x40>; + sound-name-prefix = "TDMIN_LB"; + clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>, + <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + spdifin: audio-controller@400 { + compatible = "amlogic,g12a-spdifin", + "amlogic,axg-spdifin"; + reg = <0x0 0x400 0x0 0x30>; + #sound-dai-cells = <0>; + sound-name-prefix = "SPDIFIN"; + interrupts = <GIC_SPI 151 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_SPDIFIN>, + <&clkc_audio AUD_CLKID_SPDIFIN_CLK>; + clock-names = "pclk", "refclk"; + status = "disabled"; + }; + + spdifout: audio-controller@480 { + compatible = "amlogic,g12a-spdifout", + "amlogic,axg-spdifout"; + reg = <0x0 0x480 0x0 0x50>; + #sound-dai-cells = <0>; + sound-name-prefix = "SPDIFOUT"; + clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>, + <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>; + clock-names = "pclk", "mclk"; + status = "disabled"; + }; + + tdmout_a: audio-controller@500 { + compatible = "amlogic,g12a-tdmout"; + reg = <0x0 0x500 0x0 0x40>; + sound-name-prefix = "TDMOUT_A"; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>, + <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmout_b: audio-controller@540 { + compatible = "amlogic,g12a-tdmout"; + reg = <0x0 0x540 0x0 0x40>; + sound-name-prefix = "TDMOUT_B"; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>, + <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmout_c: audio-controller@580 { + compatible = "amlogic,g12a-tdmout"; + reg = <0x0 0x580 0x0 0x40>; + sound-name-prefix = "TDMOUT_C"; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>, + <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + spdifout_b: audio-controller@680 { + compatible = "amlogic,g12a-spdifout", + "amlogic,axg-spdifout"; + reg = <0x0 0x680 0x0 0x50>; + #sound-dai-cells = <0>; + sound-name-prefix = "SPDIFOUT_B"; + clocks = <&clkc_audio AUD_CLKID_SPDIFOUT_B>, + <&clkc_audio AUD_CLKID_SPDIFOUT_B_CLK>; + clock-names = "pclk", "mclk"; + status = "disabled"; + }; + + tohdmitx: audio-controller@744 { + compatible = "amlogic,g12a-tohdmitx"; + reg = <0x0 0x744 0x0 0x4>; + #sound-dai-cells = <1>; + sound-name-prefix = "TOHDMITX"; + status = "disabled"; + }; + }; + usb3_pcie_phy: phy@46000 { compatible = "amlogic,g12a-usb3-pcie-phy"; reg = <0x0 0x46000 0x0 0x2000>; @@ -314,6 +1737,38 @@ assigned-clock-rates = <100000000>; #phy-cells = <1>; }; + + eth_phy: mdio-multiplexer@4c000 { + compatible = "amlogic,g12a-mdio-mux"; + reg = <0x0 0x4c000 0x0 0xa4>; + clocks = <&clkc CLKID_ETH_PHY>, + <&xtal>, + <&clkc CLKID_MPLL_50M>; + clock-names = "pclk", "clkin0", "clkin1"; + mdio-parent-bus = <&mdio0>; + #address-cells = <1>; + #size-cells = <0>; + + ext_mdio: mdio@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + int_mdio: mdio@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + internal_ephy: ethernet_phy@8 { + compatible = "ethernet-phy-id0180.3301", + "ethernet-phy-ieee802.3-c22"; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <8>; + max-speed = <100>; + }; + }; + }; }; aobus: bus@ff800000 { @@ -401,6 +1856,145 @@ gpio-ranges = <&ao_pinctrl 0 0 15>; }; + i2c_ao_sck_pins: i2c_ao_sck_pins { + mux { + groups = "i2c_ao_sck"; + function = "i2c_ao"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c_ao_sda_pins: i2c_ao_sda { + mux { + groups = "i2c_ao_sda"; + function = "i2c_ao"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c_ao_sck_e_pins: i2c_ao_sck_e { + mux { + groups = "i2c_ao_sck_e"; + function = "i2c_ao"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c_ao_sda_e_pins: i2c_ao_sda_e { + mux { + groups = "i2c_ao_sda_e"; + function = "i2c_ao"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + mclk0_ao_pins: mclk0-ao { + mux { + groups = "mclk0_ao"; + function = "mclk0_ao"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_ao_b_din0_pins: tdm-ao-b-din0 { + mux { + groups = "tdm_ao_b_din0"; + function = "tdm_ao_b"; + bias-disable; + }; + }; + + spdif_ao_out_pins: spdif-ao-out { + mux { + groups = "spdif_ao_out"; + function = "spdif_ao_out"; + drive-strength-microamp = <500>; + bias-disable; + }; + }; + + tdm_ao_b_din1_pins: tdm-ao-b-din1 { + mux { + groups = "tdm_ao_b_din1"; + function = "tdm_ao_b"; + bias-disable; + }; + }; + + tdm_ao_b_din2_pins: tdm-ao-b-din2 { + mux { + groups = "tdm_ao_b_din2"; + function = "tdm_ao_b"; + bias-disable; + }; + }; + + tdm_ao_b_dout0_pins: tdm-ao-b-dout0 { + mux { + groups = "tdm_ao_b_dout0"; + function = "tdm_ao_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_ao_b_dout1_pins: tdm-ao-b-dout1 { + mux { + groups = "tdm_ao_b_dout1"; + function = "tdm_ao_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_ao_b_dout2_pins: tdm-ao-b-dout2 { + mux { + groups = "tdm_ao_b_dout2"; + function = "tdm_ao_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_ao_b_fs_pins: tdm-ao-b-fs { + mux { + groups = "tdm_ao_b_fs"; + function = "tdm_ao_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_ao_b_sclk_pins: tdm-ao-b-sclk { + mux { + groups = "tdm_ao_b_sclk"; + function = "tdm_ao_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_ao_b_slv_fs_pins: tdm-ao-b-slv-fs { + mux { + groups = "tdm_ao_b_slv_fs"; + function = "tdm_ao_b"; + bias-disable; + }; + }; + + tdm_ao_b_slv_sclk_pins: tdm-ao-b-slv-sclk { + mux { + groups = "tdm_ao_b_slv_sclk"; + function = "tdm_ao_b"; + bias-disable; + }; + }; + uart_ao_a_pins: uart-a-ao { mux { groups = "uart_ao_a_tx", @@ -418,6 +2012,69 @@ bias-disable; }; }; + + pwm_ao_a_pins: pwm-ao-a { + mux { + groups = "pwm_ao_a"; + function = "pwm_ao_a"; + bias-disable; + }; + }; + + pwm_ao_b_pins: pwm-ao-b { + mux { + groups = "pwm_ao_b"; + function = "pwm_ao_b"; + bias-disable; + }; + }; + + pwm_ao_c_4_pins: pwm-ao-c-4 { + mux { + groups = "pwm_ao_c_4"; + function = "pwm_ao_c"; + bias-disable; + }; + }; + + pwm_ao_c_6_pins: pwm-ao-c-6 { + mux { + groups = "pwm_ao_c_6"; + function = "pwm_ao_c"; + bias-disable; + }; + }; + + pwm_ao_d_5_pins: pwm-ao-d-5 { + mux { + groups = "pwm_ao_d_5"; + function = "pwm_ao_d"; + bias-disable; + }; + }; + + pwm_ao_d_10_pins: pwm-ao-d-10 { + mux { + groups = "pwm_ao_d_10"; + function = "pwm_ao_d"; + bias-disable; + }; + }; + + pwm_ao_d_e_pins: pwm-ao-d-e { + mux { + groups = "pwm_ao_d_e"; + function = "pwm_ao_d"; + }; + }; + + remote_input_ao_pins: remote-input-ao { + mux { + groups = "remote_ao_input"; + function = "remote_ao_input"; + bias-disable; + }; + }; }; }; @@ -445,12 +2102,19 @@ status = "disabled"; }; + pwm_AO_cd: pwm@2000 { + compatible = "amlogic,meson-g12a-ao-pwm-cd"; + reg = <0x0 0x2000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + uart_AO: serial@3000 { compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; reg = <0x0 0x3000 0x0 0x18>; interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, <&xtal>, <&xtal>; + clocks = <&xtal>, <&clkc_AO CLKID_AO_UART>, <&xtal>; clock-names = "xtal", "pclk", "baud"; status = "disabled"; }; @@ -460,11 +2124,35 @@ "amlogic,meson-ao-uart"; reg = <0x0 0x4000 0x0 0x18>; interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, <&xtal>, <&xtal>; + clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>; clock-names = "xtal", "pclk", "baud"; status = "disabled"; }; + i2c_AO: i2c@5000 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x05000 0x0 0x20>; + interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc CLKID_I2C>; + }; + + pwm_AO_ab: pwm@7000 { + compatible = "amlogic,meson-g12a-ao-pwm-ab"; + reg = <0x0 0x7000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + + ir: ir@8000 { + compatible = "amlogic,meson-gxbb-ir"; + reg = <0x0 0x8000 0x0 0x20>; + interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + saradc: adc@9000 { compatible = "amlogic,meson-g12a-saradc", "amlogic,meson-saradc"; @@ -533,6 +2221,76 @@ #reset-cells = <1>; }; + gpio_intc: interrupt-controller@f080 { + compatible = "amlogic,meson-g12a-gpio-intc", + "amlogic,meson-gpio-intc"; + reg = <0x0 0xf080 0x0 0x10>; + interrupt-controller; + #interrupt-cells = <2>; + amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; + }; + + pwm_ef: pwm@19000 { + compatible = "amlogic,meson-g12a-ee-pwm"; + reg = <0x0 0x19000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm_cd: pwm@1a000 { + compatible = "amlogic,meson-g12a-ee-pwm"; + reg = <0x0 0x1a000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm_ab: pwm@1b000 { + compatible = "amlogic,meson-g12a-ee-pwm"; + reg = <0x0 0x1b000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + + i2c3: i2c@1c000 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x1c000 0x0 0x20>; + interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc CLKID_I2C>; + }; + + i2c2: i2c@1d000 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x1d000 0x0 0x20>; + interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc CLKID_I2C>; + }; + + i2c1: i2c@1e000 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x1e000 0x0 0x20>; + interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc CLKID_I2C>; + }; + + i2c0: i2c@1f000 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x1f000 0x0 0x20>; + interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc CLKID_I2C>; + }; + clk_msr: clock-measure@18000 { compatible = "amlogic,meson-g12a-clk-measure"; reg = <0x0 0x18000 0x0 0x10>; @@ -566,6 +2324,43 @@ }; }; + sd_emmc_a: sd@ffe03000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0xffe03000 0x0 0x800>; + interrupts = <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + clocks = <&clkc CLKID_SD_EMMC_A>, + <&clkc CLKID_SD_EMMC_A_CLK0>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_A>; + amlogic,dram-access-quirk; + }; + + sd_emmc_b: sd@ffe05000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0xffe05000 0x0 0x800>; + interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + clocks = <&clkc CLKID_SD_EMMC_B>, + <&clkc CLKID_SD_EMMC_B_CLK0>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_B>; + }; + + sd_emmc_c: mmc@ffe07000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0xffe07000 0x0 0x800>; + interrupts = <GIC_SPI 191 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + clocks = <&clkc CLKID_SD_EMMC_C>, + <&clkc CLKID_SD_EMMC_C_CLK0>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_C>; + }; + usb: usb@ffe09000 { status = "disabled"; compatible = "amlogic,meson-g12a-usb-ctrl"; diff --git a/arch/arm/dts/meson-g12b-odroid-n2.dts b/arch/arm/dts/meson-g12b-odroid-n2.dts new file mode 100644 index 00000000000..81780ffcc7f --- /dev/null +++ b/arch/arm/dts/meson-g12b-odroid-n2.dts @@ -0,0 +1,386 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ + +/dts-v1/; + +#include "meson-g12b.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/meson-g12a-gpio.h> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> + +/ { + compatible = "hardkernel,odroid-n2", "amlogic,g12b"; + model = "Hardkernel ODROID-N2"; + + aliases { + serial0 = &uart_AO; + ethernet0 = ðmac; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; + }; + + leds { + compatible = "gpio-leds"; + + blue { + label = "n2:blue"; + gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + tflash_vdd: regulator-tflash_vdd { + compatible = "regulator-fixed"; + + regulator-name = "TFLASH_VDD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio_ao GPIOAO_8 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + tf_io: gpio-regulator-tf_io { + compatible = "regulator-gpio"; + + regulator-name = "TF_IO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + + states = <3300000 0 + 1800000 1>; + }; + + flash_1v8: regulator-flash_1v8 { + compatible = "regulator-fixed"; + regulator-name = "FLASH_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + main_12v: regulator-main_12v { + compatible = "regulator-fixed"; + regulator-name = "12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + }; + + vcc_5v: regulator-vcc_5v { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <&main_12v>; + }; + + vcc_1v8: regulator-vcc_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + /* FIXME: actually controlled by VDDCPU_B_EN */ + }; + + hub_5v: regulator-hub_5v { + compatible = "regulator-fixed"; + regulator-name = "HUB_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v>; + + /* Connected to the Hub CHIPENABLE, LOW sets low power state */ + gpio = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + usb_pwr_en: regulator-usb_pwr_en { + compatible = "regulator-fixed"; + regulator-name = "USB_PWR_EN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v>; + + /* Connected to the microUSB port power enable */ + gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vddao_1v8: regulator-vddao_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&main_12v>; + regulator-always-on; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "G12A-ODROIDN2"; + audio-aux-devs = <&tdmout_b>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* hdmi glue */ + dai-link-4 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&arb { + status = "okay"; +}; + +&cec_AO { + pinctrl-0 = <&cec_ao_a_h_pins>; + pinctrl-names = "default"; + status = "disabled"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cecb_AO { + pinctrl-0 = <&cec_ao_b_h_pins>; + pinctrl-names = "default"; + status = "okay"; + hdmi-phandle = <&hdmi_tx>; +}; + +&clkc_audio { + status = "okay"; +}; + +&ext_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + max-speed = <1000>; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_14 */ + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +ðmac { + pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; + pinctrl-names = "default"; + status = "okay"; + phy-mode = "rgmii"; + phy-handle = <&external_phy>; + amlogic,tx-delay-ns = <2>; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&gpio { + /* + * WARNING: The USB Hub on the Odroid-N2 needs a reset signal + * to be turned high in order to be detected by the USB Controller + * This signal should be handled by a USB specific power sequence + * in order to reset the Hub when USB bus is powered down. + */ + usb-hub { + gpio-hog; + gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "usb-hub-reset"; + }; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; + hdmi-supply = <&vcc_5v>; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&tflash_vdd>; + vqmmc-supply = <&tf_io>; + +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&flash_1v8>; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb { + status = "okay"; + vbus-supply = <&usb_pwr_en>; +}; + +&usb2_phy0 { + phy-supply = <&vcc_5v>; +}; + +&usb2_phy1 { + /* Enable the hub which is connected to this port */ + phy-supply = <&hub_5v>; +}; diff --git a/arch/arm/dts/meson-g12b.dtsi b/arch/arm/dts/meson-g12b.dtsi new file mode 100644 index 00000000000..9e88e513b22 --- /dev/null +++ b/arch/arm/dts/meson-g12b.dtsi @@ -0,0 +1,82 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ + +#include "meson-g12a.dtsi" + +/ { + compatible = "amlogic,g12b"; + + cpus { + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu100>; + }; + + core1 { + cpu = <&cpu101>; + }; + + core2 { + cpu = <&cpu102>; + }; + + core3 { + cpu = <&cpu103>; + }; + }; + }; + + /delete-node/ cpu@2; + /delete-node/ cpu@3; + + cpu100: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu101: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x0 0x101>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu102: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x0 0x102>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu103: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x0 0x103>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + }; +}; + +&clkc { + compatible = "amlogic,g12b-clkc"; +}; diff --git a/arch/arm/dts/mt8516-pumpkin.dts b/arch/arm/dts/mt8516-pumpkin.dts new file mode 100644 index 00000000000..cd43c1f5e32 --- /dev/null +++ b/arch/arm/dts/mt8516-pumpkin.dts @@ -0,0 +1,110 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2019 BayLibre SAS. + * Author: Fabien Parent <fparent@baylibre.com> + */ + +/dts-v1/; + +#include <config.h> +#include "mt8516.dtsi" + +/ { + model = "Pumpkin MT8516"; + + chosen { + stdout-path = &uart0; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x40000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + + /* 128 KiB reserved for ARM Trusted Firmware (BL31) */ + bl31_secmon_reserved: secmon@43000000 { + no-map; + reg = <0 0x43000000 0 0x20000>; + }; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_default>; + bus-width = <4>; + max-frequency = <200000000>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + cap-mmc-hw-reset; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + non-removable; + status = "okay"; +}; + +&pinctrl { + mmc0_pins_default: mmc0default { + mux { + function = "msdc"; + groups = "msdc0"; + }; + + conf-cmd-data { + pins = "MSDC0_CMD", "MSDC0_DAT0", "MSDC0_DAT1", + "MSDC0_DAT2", "MSDC0_DAT3", "MSDC0_DAT4", + "MSDC0_DAT5", "MSDC0_DAT6", "MSDC0_DAT7"; + input-enable; + bias-pull-up; + }; + + conf-clk { + pins = "MSDC0_CLK"; + bias-pull-down; + }; + + conf-rst { + pins = "MSDC0_RSTB"; + bias-pull-up; + }; + }; + + uart0_pins: uart0 { + mux { + function = "uart"; + groups = "uart0_0_rxd_txd"; + }; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; diff --git a/arch/arm/dts/r8a7795.dtsi b/arch/arm/dts/r8a7795.dtsi index abeac305938..097538cc4b1 100644 --- a/arch/arm/dts/r8a7795.dtsi +++ b/arch/arm/dts/r8a7795.dtsi @@ -462,6 +462,76 @@ reg = <0 0xe6060000 0 0x50c>; }; + cmt0: timer@e60f0000 { + compatible = "renesas,r8a7795-cmt0", + "renesas,rcar-gen3-cmt0"; + reg = <0 0xe60f0000 0 0x1004>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 303>; + clock-names = "fck"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 303>; + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,r8a7795-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 302>; + clock-names = "fck"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 302>; + status = "disabled"; + }; + + cmt2: timer@e6140000 { + compatible = "renesas,r8a7795-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6140000 0 0x1004>; + interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 301>; + clock-names = "fck"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 301>; + status = "disabled"; + }; + + cmt3: timer@e6148000 { + compatible = "renesas,r8a7795-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6148000 0 0x1004>; + interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 300>; + clock-names = "fck"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 300>; + status = "disabled"; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a7795-cpg-mssr"; reg = <0 0xe6150000 0 0x1000>; @@ -1836,7 +1906,7 @@ <0 0xec5a0000 0 0x100>, /* ADG */ <0 0xec540000 0 0x1000>, /* SSIU */ <0 0xec541000 0 0x280>, /* SSI */ - <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ + <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; clocks = <&cpg CPG_MOD 1005>, diff --git a/arch/arm/dts/r8a7796-salvator-x.dts b/arch/arm/dts/r8a7796-salvator-x.dts index b4f9567cb9f..2aefa53cb16 100644 --- a/arch/arm/dts/r8a7796-salvator-x.dts +++ b/arch/arm/dts/r8a7796-salvator-x.dts @@ -68,6 +68,7 @@ ports { /* rsnd_port0 is on salvator-common */ rsnd_port1: port@1 { + reg = <1>; rsnd_endpoint1: endpoint { remote-endpoint = <&dw_hdmi0_snd_in>; diff --git a/arch/arm/dts/r8a7796.dtsi b/arch/arm/dts/r8a7796.dtsi index cdf784899cf..d5e2f4af83a 100644 --- a/arch/arm/dts/r8a7796.dtsi +++ b/arch/arm/dts/r8a7796.dtsi @@ -1775,7 +1775,7 @@ <0 0xec5a0000 0 0x100>, /* ADG */ <0 0xec540000 0 0x1000>, /* SSIU */ <0 0xec541000 0 0x280>, /* SSI */ - <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ + <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; clocks = <&cpg CPG_MOD 1005>, @@ -2162,17 +2162,6 @@ dma-names = "rx", "tx"; }; }; - - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - }; - port@1 { - reg = <1>; - }; - }; }; audma0: dma-controller@ec700000 { diff --git a/arch/arm/dts/r8a77965.dtsi b/arch/arm/dts/r8a77965.dtsi index 9763d108e18..2554b1742db 100644 --- a/arch/arm/dts/r8a77965.dtsi +++ b/arch/arm/dts/r8a77965.dtsi @@ -317,6 +317,76 @@ reg = <0 0xe6060000 0 0x50c>; }; + cmt0: timer@e60f0000 { + compatible = "renesas,r8a77965-cmt0", + "renesas,rcar-gen3-cmt0"; + reg = <0 0xe60f0000 0 0x1004>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 303>; + clock-names = "fck"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 303>; + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,r8a77965-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 302>; + clock-names = "fck"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 302>; + status = "disabled"; + }; + + cmt2: timer@e6140000 { + compatible = "renesas,r8a77965-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6140000 0 0x1004>; + interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 301>; + clock-names = "fck"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 301>; + status = "disabled"; + }; + + cmt3: timer@e6148000 { + compatible = "renesas,r8a77965-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6148000 0 0x1004>; + interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 300>; + clock-names = "fck"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 300>; + status = "disabled"; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a77965-cpg-mssr"; reg = <0 0xe6150000 0 0x1000>; @@ -1461,7 +1531,7 @@ <0 0xec5a0000 0 0x100>, /* ADG */ <0 0xec540000 0 0x1000>, /* SSIU */ <0 0xec541000 0 0x280>, /* SSI */ - <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ + <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; clocks = <&cpg CPG_MOD 1005>, @@ -1585,56 +1655,267 @@ }; }; + rcar_sound,ssiu { + ssiu00: ssiu-0 { + dmas = <&audma0 0x15>, <&audma1 0x16>; + dma-names = "rx", "tx"; + }; + ssiu01: ssiu-1 { + dmas = <&audma0 0x35>, <&audma1 0x36>; + dma-names = "rx", "tx"; + }; + ssiu02: ssiu-2 { + dmas = <&audma0 0x37>, <&audma1 0x38>; + dma-names = "rx", "tx"; + }; + ssiu03: ssiu-3 { + dmas = <&audma0 0x47>, <&audma1 0x48>; + dma-names = "rx", "tx"; + }; + ssiu04: ssiu-4 { + dmas = <&audma0 0x3F>, <&audma1 0x40>; + dma-names = "rx", "tx"; + }; + ssiu05: ssiu-5 { + dmas = <&audma0 0x43>, <&audma1 0x44>; + dma-names = "rx", "tx"; + }; + ssiu06: ssiu-6 { + dmas = <&audma0 0x4F>, <&audma1 0x50>; + dma-names = "rx", "tx"; + }; + ssiu07: ssiu-7 { + dmas = <&audma0 0x53>, <&audma1 0x54>; + dma-names = "rx", "tx"; + }; + ssiu10: ssiu-8 { + dmas = <&audma0 0x49>, <&audma1 0x4a>; + dma-names = "rx", "tx"; + }; + ssiu11: ssiu-9 { + dmas = <&audma0 0x4B>, <&audma1 0x4C>; + dma-names = "rx", "tx"; + }; + ssiu12: ssiu-10 { + dmas = <&audma0 0x57>, <&audma1 0x58>; + dma-names = "rx", "tx"; + }; + ssiu13: ssiu-11 { + dmas = <&audma0 0x59>, <&audma1 0x5A>; + dma-names = "rx", "tx"; + }; + ssiu14: ssiu-12 { + dmas = <&audma0 0x5F>, <&audma1 0x60>; + dma-names = "rx", "tx"; + }; + ssiu15: ssiu-13 { + dmas = <&audma0 0xC3>, <&audma1 0xC4>; + dma-names = "rx", "tx"; + }; + ssiu16: ssiu-14 { + dmas = <&audma0 0xC7>, <&audma1 0xC8>; + dma-names = "rx", "tx"; + }; + ssiu17: ssiu-15 { + dmas = <&audma0 0xCB>, <&audma1 0xCC>; + dma-names = "rx", "tx"; + }; + ssiu20: ssiu-16 { + dmas = <&audma0 0x63>, <&audma1 0x64>; + dma-names = "rx", "tx"; + }; + ssiu21: ssiu-17 { + dmas = <&audma0 0x67>, <&audma1 0x68>; + dma-names = "rx", "tx"; + }; + ssiu22: ssiu-18 { + dmas = <&audma0 0x6B>, <&audma1 0x6C>; + dma-names = "rx", "tx"; + }; + ssiu23: ssiu-19 { + dmas = <&audma0 0x6D>, <&audma1 0x6E>; + dma-names = "rx", "tx"; + }; + ssiu24: ssiu-20 { + dmas = <&audma0 0xCF>, <&audma1 0xCE>; + dma-names = "rx", "tx"; + }; + ssiu25: ssiu-21 { + dmas = <&audma0 0xEB>, <&audma1 0xEC>; + dma-names = "rx", "tx"; + }; + ssiu26: ssiu-22 { + dmas = <&audma0 0xED>, <&audma1 0xEE>; + dma-names = "rx", "tx"; + }; + ssiu27: ssiu-23 { + dmas = <&audma0 0xEF>, <&audma1 0xF0>; + dma-names = "rx", "tx"; + }; + ssiu30: ssiu-24 { + dmas = <&audma0 0x6f>, <&audma1 0x70>; + dma-names = "rx", "tx"; + }; + ssiu31: ssiu-25 { + dmas = <&audma0 0x21>, <&audma1 0x22>; + dma-names = "rx", "tx"; + }; + ssiu32: ssiu-26 { + dmas = <&audma0 0x23>, <&audma1 0x24>; + dma-names = "rx", "tx"; + }; + ssiu33: ssiu-27 { + dmas = <&audma0 0x25>, <&audma1 0x26>; + dma-names = "rx", "tx"; + }; + ssiu34: ssiu-28 { + dmas = <&audma0 0x27>, <&audma1 0x28>; + dma-names = "rx", "tx"; + }; + ssiu35: ssiu-29 { + dmas = <&audma0 0x29>, <&audma1 0x2A>; + dma-names = "rx", "tx"; + }; + ssiu36: ssiu-30 { + dmas = <&audma0 0x2B>, <&audma1 0x2C>; + dma-names = "rx", "tx"; + }; + ssiu37: ssiu-31 { + dmas = <&audma0 0x2D>, <&audma1 0x2E>; + dma-names = "rx", "tx"; + }; + ssiu40: ssiu-32 { + dmas = <&audma0 0x71>, <&audma1 0x72>; + dma-names = "rx", "tx"; + }; + ssiu41: ssiu-33 { + dmas = <&audma0 0x17>, <&audma1 0x18>; + dma-names = "rx", "tx"; + }; + ssiu42: ssiu-34 { + dmas = <&audma0 0x19>, <&audma1 0x1A>; + dma-names = "rx", "tx"; + }; + ssiu43: ssiu-35 { + dmas = <&audma0 0x1B>, <&audma1 0x1C>; + dma-names = "rx", "tx"; + }; + ssiu44: ssiu-36 { + dmas = <&audma0 0x1D>, <&audma1 0x1E>; + dma-names = "rx", "tx"; + }; + ssiu45: ssiu-37 { + dmas = <&audma0 0x1F>, <&audma1 0x20>; + dma-names = "rx", "tx"; + }; + ssiu46: ssiu-38 { + dmas = <&audma0 0x31>, <&audma1 0x32>; + dma-names = "rx", "tx"; + }; + ssiu47: ssiu-39 { + dmas = <&audma0 0x33>, <&audma1 0x34>; + dma-names = "rx", "tx"; + }; + ssiu50: ssiu-40 { + dmas = <&audma0 0x73>, <&audma1 0x74>; + dma-names = "rx", "tx"; + }; + ssiu60: ssiu-41 { + dmas = <&audma0 0x75>, <&audma1 0x76>; + dma-names = "rx", "tx"; + }; + ssiu70: ssiu-42 { + dmas = <&audma0 0x79>, <&audma1 0x7a>; + dma-names = "rx", "tx"; + }; + ssiu80: ssiu-43 { + dmas = <&audma0 0x7b>, <&audma1 0x7c>; + dma-names = "rx", "tx"; + }; + ssiu90: ssiu-44 { + dmas = <&audma0 0x7d>, <&audma1 0x7e>; + dma-names = "rx", "tx"; + }; + ssiu91: ssiu-45 { + dmas = <&audma0 0x7F>, <&audma1 0x80>; + dma-names = "rx", "tx"; + }; + ssiu92: ssiu-46 { + dmas = <&audma0 0x81>, <&audma1 0x82>; + dma-names = "rx", "tx"; + }; + ssiu93: ssiu-47 { + dmas = <&audma0 0x83>, <&audma1 0x84>; + dma-names = "rx", "tx"; + }; + ssiu94: ssiu-48 { + dmas = <&audma0 0xA3>, <&audma1 0xA4>; + dma-names = "rx", "tx"; + }; + ssiu95: ssiu-49 { + dmas = <&audma0 0xA5>, <&audma1 0xA6>; + dma-names = "rx", "tx"; + }; + ssiu96: ssiu-50 { + dmas = <&audma0 0xA7>, <&audma1 0xA8>; + dma-names = "rx", "tx"; + }; + ssiu97: ssiu-51 { + dmas = <&audma0 0xA9>, <&audma1 0xAA>; + dma-names = "rx", "tx"; + }; + }; + rcar_sound,ssi { ssi0: ssi-0 { interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x01>, <&audma1 0x02>; + dma-names = "rx", "tx"; }; ssi1: ssi-1 { interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x03>, <&audma1 0x04>; + dma-names = "rx", "tx"; }; ssi2: ssi-2 { interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x05>, <&audma1 0x06>; + dma-names = "rx", "tx"; }; ssi3: ssi-3 { interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x07>, <&audma1 0x08>; + dma-names = "rx", "tx"; }; ssi4: ssi-4 { interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x09>, <&audma1 0x0a>; + dma-names = "rx", "tx"; }; ssi5: ssi-5 { interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x0b>, <&audma1 0x0c>; + dma-names = "rx", "tx"; }; ssi6: ssi-6 { interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x0d>, <&audma1 0x0e>; + dma-names = "rx", "tx"; }; ssi7: ssi-7 { interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x0f>, <&audma1 0x10>; + dma-names = "rx", "tx"; }; ssi8: ssi-8 { interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x11>, <&audma1 0x12>; + dma-names = "rx", "tx"; }; ssi9: ssi-9 { interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x13>, <&audma1 0x14>; + dma-names = "rx", "tx"; }; }; }; @@ -2166,7 +2447,6 @@ du: display@feb00000 { compatible = "renesas,du-r8a77965"; reg = <0 0xfeb00000 0 0x80000>; - reg-names = "du"; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/dts/r8a77990-ebisu.dts b/arch/arm/dts/r8a77990-ebisu.dts index 144c0820cf6..c7277258995 100644 --- a/arch/arm/dts/r8a77990-ebisu.dts +++ b/arch/arm/dts/r8a77990-ebisu.dts @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0 */ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the ebisu board * @@ -19,7 +19,7 @@ }; chosen { - bootargs = "ignore_loglevel"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; stdout-path = "serial0:115200n8"; }; @@ -337,6 +337,15 @@ &i2c0 { status = "okay"; + io_expander: gpio@20 { + compatible = "onnn,pca9654"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio2>; + interrupts = <22 IRQ_TYPE_LEVEL_LOW>; + }; + hdmi-encoder@39 { compatible = "adi,adv7511w"; reg = <0x39>; @@ -398,7 +407,7 @@ }; port@a { - reg = <0xa>; + reg = <10>; adv7482_txa: endpoint { clock-lanes = <0>; @@ -440,6 +449,28 @@ }; }; +&i2c_dvfs { + status = "okay"; + + clock-frequency = <400000>; + + pmic: pmic@30 { + pinctrl-0 = <&irq0_pins>; + pinctrl-names = "default"; + + compatible = "rohm,bd9571mwv"; + reg = <0x30>; + interrupt-parent = <&intc_ex>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + rohm,ddr-backup-power = <0x1>; + rohm,rstbmode-level; + }; +}; + &lvds0 { status = "okay"; @@ -458,6 +489,13 @@ }; &lvds1 { + /* + * Even though the LVDS1 output is not connected, the encoder must be + * enabled to supply a pixel clock to the DU for the DPAD output when + * LVDS0 is in use. + */ + status = "okay"; + clocks = <&cpg CPG_MOD 727>, <&x13_clk>, <&extal_clk>; @@ -495,6 +533,11 @@ function = "du"; }; + irq0_pins: irq0 { + groups = "intc_ex_irq0"; + function = "intc_ex"; + }; + pwm3_pins: pwm3 { groups = "pwm3_b"; function = "pwm3"; @@ -650,6 +693,10 @@ status = "okay"; }; +&vin5 { + status = "okay"; +}; + &xhci0 { pinctrl-0 = <&usb30_pins>; pinctrl-names = "default"; diff --git a/arch/arm/dts/r8a77990.dtsi b/arch/arm/dts/r8a77990.dtsi index d2ad665fe2d..56cb566ffa0 100644 --- a/arch/arm/dts/r8a77990.dtsi +++ b/arch/arm/dts/r8a77990.dtsi @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0 */ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the R-Car E3 (R8A77990) SoC * @@ -284,6 +284,76 @@ status = "disabled"; }; + cmt0: timer@e60f0000 { + compatible = "renesas,r8a77990-cmt0", + "renesas,rcar-gen3-cmt0"; + reg = <0 0xe60f0000 0 0x1004>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 303>; + clock-names = "fck"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 303>; + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,r8a77990-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 302>; + clock-names = "fck"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 302>; + status = "disabled"; + }; + + cmt2: timer@e6140000 { + compatible = "renesas,r8a77990-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6140000 0 0x1004>; + interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 301>; + clock-names = "fck"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 301>; + status = "disabled"; + }; + + cmt3: timer@e6148000 { + compatible = "renesas,r8a77990-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6148000 0 0x1004>; + interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 300>; + clock-names = "fck"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 300>; + status = "disabled"; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a77990-cpg-mssr"; reg = <0 0xe6150000 0 0x1000>; @@ -1656,7 +1726,7 @@ }; csi40: csi2@feaa0000 { - compatible = "renesas,r8a77990-csi2", "renesas,rcar-gen3-csi2"; + compatible = "renesas,r8a77990-csi2"; reg = <0 0xfeaa0000 0 0x10000>; interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 716>; diff --git a/arch/arm/dts/r8a77995-draak.dts b/arch/arm/dts/r8a77995-draak.dts index db2bed1751b..a7dc11e36fd 100644 --- a/arch/arm/dts/r8a77995-draak.dts +++ b/arch/arm/dts/r8a77995-draak.dts @@ -20,7 +20,7 @@ }; chosen { - bootargs = "ignore_loglevel"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; stdout-path = "serial0:115200n8"; }; @@ -168,7 +168,6 @@ pinctrl-names = "default"; renesas,no-ether-link; phy-handle = <&phy0>; - phy-mode = "rgmii-txid"; status = "okay"; phy0: ethernet-phy@0 { @@ -179,6 +178,18 @@ }; }; +&can0 { + pinctrl-0 = <&can0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&can1 { + pinctrl-0 = <&can1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + &du { pinctrl-0 = <&du_pins>; pinctrl-names = "default"; @@ -356,6 +367,13 @@ }; &lvds1 { + /* + * Even though the LVDS1 output is not connected, the encoder must be + * enabled to supply a pixel clock to the DU for the DPAD output when + * LVDS0 is in use. + */ + status = "okay"; + clocks = <&cpg CPG_MOD 727>, <&x12_clk>, <&extal_clk>; @@ -375,6 +393,16 @@ }; }; + can0_pins: can0 { + groups = "can0_data_a"; + function = "can0"; + }; + + can1_pins: can1 { + groups = "can1_data_a"; + function = "can1"; + }; + du_pins: du { groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; function = "du"; diff --git a/arch/arm/dts/rk3288-phycore-rdk.dts b/arch/arm/dts/rk3288-phycore-rdk.dts index f2bb7b5f117..cc3921095c3 100644 --- a/arch/arm/dts/rk3288-phycore-rdk.dts +++ b/arch/arm/dts/rk3288-phycore-rdk.dts @@ -55,11 +55,6 @@ stdout-path = &uart2; }; - config { - u-boot,dm-pre-reloc; - u-boot,boot0 = &emmc; - }; - user_buttons: user-buttons { compatible = "gpio-keys"; pinctrl-names = "default"; diff --git a/arch/arm/dts/rk3288-veyron.dtsi b/arch/arm/dts/rk3288-veyron.dtsi index 916dd486de0..8754043b9b3 100644 --- a/arch/arm/dts/rk3288-veyron.dtsi +++ b/arch/arm/dts/rk3288-veyron.dtsi @@ -16,11 +16,7 @@ chosen { stdout-path = &uart2; - }; - - config { - u-boot,dm-pre-reloc; - u-boot,boot0 = &spi_flash; + u-boot,spl-boot-order = &spi_flash; }; firmware { diff --git a/arch/arm/dts/salvator-common.dtsi b/arch/arm/dts/salvator-common.dtsi index a225c245727..2dba1328acf 100644 --- a/arch/arm/dts/salvator-common.dtsi +++ b/arch/arm/dts/salvator-common.dtsi @@ -29,6 +29,7 @@ */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> / { aliases { @@ -86,6 +87,63 @@ }; }; + keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&keys_pins>; + pinctrl-names = "default"; + + key-1 { + gpios = <&gpio5 17 GPIO_ACTIVE_LOW>; + linux,code = <KEY_1>; + label = "SW4-1"; + wakeup-source; + debounce-interval = <20>; + }; + key-2 { + gpios = <&gpio5 20 GPIO_ACTIVE_LOW>; + linux,code = <KEY_2>; + label = "SW4-2"; + wakeup-source; + debounce-interval = <20>; + }; + key-3 { + gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; + linux,code = <KEY_3>; + label = "SW4-3"; + wakeup-source; + debounce-interval = <20>; + }; + key-4 { + gpios = <&gpio5 23 GPIO_ACTIVE_LOW>; + linux,code = <KEY_4>; + label = "SW4-4"; + wakeup-source; + debounce-interval = <20>; + }; + key-a { + gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; + linux,code = <KEY_A>; + label = "TSW0"; + wakeup-source; + debounce-interval = <20>; + }; + key-b { + gpios = <&gpio6 12 GPIO_ACTIVE_LOW>; + linux,code = <KEY_B>; + label = "TSW1"; + wakeup-source; + debounce-interval = <20>; + }; + key-c { + gpios = <&gpio6 13 GPIO_ACTIVE_LOW>; + linux,code = <KEY_C>; + label = "TSW2"; + wakeup-source; + debounce-interval = <20>; + }; + }; + reg_1p8v: regulator0 { compatible = "regulator-fixed"; regulator-name = "fixed-1.8V"; @@ -572,6 +630,11 @@ function = "intc_ex"; }; + keys_pins: keys { + pins = "GP_5_17", "GP_5_20", "GP_5_22"; + bias-pull-up; + }; + pwm1_pins: pwm1 { groups = "pwm1_a"; function = "pwm1"; @@ -719,6 +782,11 @@ }; }; +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; + &scif1 { pinctrl-0 = <&scif1_pins>; pinctrl-names = "default"; @@ -857,11 +925,6 @@ status = "okay"; }; -&rwdt { - timeout-sec = <60>; - status = "okay"; -}; - &xhci0 { pinctrl-0 = <&usb30_pins>; pinctrl-names = "default"; diff --git a/arch/arm/dts/vf-colibri-u-boot.dtsi b/arch/arm/dts/vf-colibri-u-boot.dtsi index db86739805d..2294ee9551e 100644 --- a/arch/arm/dts/vf-colibri-u-boot.dtsi +++ b/arch/arm/dts/vf-colibri-u-boot.dtsi @@ -21,3 +21,7 @@ &uart0 { u-boot,dm-pre-reloc; }; + +&dcu0 { + u-boot,dm-pre-reloc; +}; diff --git a/arch/arm/dts/vf-colibri.dtsi b/arch/arm/dts/vf-colibri.dtsi index 91ca4e4ddd3..9de4b28e870 100644 --- a/arch/arm/dts/vf-colibri.dtsi +++ b/arch/arm/dts/vf-colibri.dtsi @@ -14,6 +14,7 @@ aliases { usb0 = &ehci0; /* required for ums */ + display1 = &dcu0; }; reg_usbh_vbus: regulator-usbh-vbus { @@ -241,3 +242,7 @@ pinctrl-0 = <&pinctrl_uart0>; status = "okay"; }; + +&dcu0 { + status = "okay"; +}; diff --git a/arch/arm/dts/vf.dtsi b/arch/arm/dts/vf.dtsi index 5e3b2c5b9dc..5f69d0fd6e6 100644 --- a/arch/arm/dts/vf.dtsi +++ b/arch/arm/dts/vf.dtsi @@ -145,6 +145,12 @@ #gpio-cells = <2>; }; + dcu0: dcu@40058000 { + compatible = "fsl,vf610-dcu"; + reg = <0x40058000 0x1200>; + status = "disabled"; + }; + ehci0: ehci@40034000 { compatible = "fsl,vf610-usb"; reg = <0x40034000 0x800>; diff --git a/arch/arm/dts/zynqmp-zc1275-revA.dts b/arch/arm/dts/zynqmp-zcu1275-revA.dts index 82c30a3fbef..c22de576a58 100644 --- a/arch/arm/dts/zynqmp-zc1275-revA.dts +++ b/arch/arm/dts/zynqmp-zcu1275-revA.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * dts file for Xilinx ZynqMP ZC1275 + * dts file for Xilinx ZynqMP ZCU1275 * * (C) Copyright 2017 - 2018, Xilinx, Inc. * @@ -14,8 +14,9 @@ #include "zynqmp-clk-ccf.dtsi" / { - model = "ZynqMP ZC1275 RevA"; - compatible = "xlnx,zynqmp-zc1275-revA", "xlnx,zynqmp-zc1275", "xlnx,zynqmp"; + model = "ZynqMP ZCU1275 RevA"; + compatible = "xlnx,zynqmp-zcu1275-revA", "xlnx,zynqmp-zcu1275", + "xlnx,zynqmp"; aliases { serial0 = &uart0; diff --git a/arch/arm/dts/zynqmp-zc1275-revB.dts b/arch/arm/dts/zynqmp-zcu1275-revB.dts index 0473503afaf..34c4becd434 100644 --- a/arch/arm/dts/zynqmp-zc1275-revB.dts +++ b/arch/arm/dts/zynqmp-zcu1275-revB.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * dts file for Xilinx ZynqMP ZC1275 RevB + * dts file for Xilinx ZynqMP ZCU1275 RevB * * (C) Copyright 2018, Xilinx, Inc. * @@ -14,8 +14,9 @@ #include "zynqmp-clk-ccf.dtsi" / { - model = "ZynqMP ZC1275 RevB"; - compatible = "xlnx,zynqmp-zc1275-revB", "xlnx,zynqmp-zc1275", "xlnx,zynqmp"; + model = "ZynqMP ZCU1275 RevB"; + compatible = "xlnx,zynqmp-zcu1275-revB", "xlnx,zynqmp-zcu1275", + "xlnx,zynqmp"; aliases { serial0 = &uart0; diff --git a/arch/arm/include/asm/arch-rockchip/bootrom.h b/arch/arm/include/asm/arch-rockchip/bootrom.h index d67f43f09c5..0da78f30b61 100644 --- a/arch/arm/include/asm/arch-rockchip/bootrom.h +++ b/arch/arm/include/asm/arch-rockchip/bootrom.h @@ -52,9 +52,11 @@ enum { BROM_LAST_BOOTSOURCE = BROM_BOOTSOURCE_USB }; +extern const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1]; + /** * Locations of the boot-device identifier in SRAM */ -#define RK3399_BROM_BOOTSOURCE_ID_ADDR 0xff8c0010 +#define BROM_BOOTSOURCE_ID_ADDR (CONFIG_IRAM_BASE + 0x10) #endif diff --git a/arch/arm/include/asm/arch-rockchip/sys_proto.h b/arch/arm/include/asm/arch-rockchip/sys_proto.h index 905c774c15b..de5a8f11a98 100644 --- a/arch/arm/include/asm/arch-rockchip/sys_proto.h +++ b/arch/arm/include/asm/arch-rockchip/sys_proto.h @@ -6,8 +6,4 @@ #ifndef _ASM_ARCH_SYS_PROTO_H #define _ASM_ARCH_SYS_PROTO_H - -/* provided to defeat compiler optimisation in board_init_f() */ -void gru_dummy_function(int i); - #endif /* _ASM_ARCH_SYS_PROTO_H */ diff --git a/arch/arm/include/asm/ti-common/davinci_nand.h b/arch/arm/include/asm/ti-common/davinci_nand.h index e26381c7fdd..28842c3b155 100644 --- a/arch/arm/include/asm/ti-common/davinci_nand.h +++ b/arch/arm/include/asm/ti-common/davinci_nand.h @@ -95,6 +95,4 @@ struct davinci_emif_regs { #define DAVINCI_ABCR_ASIZE_16BIT 1 #define DAVINCI_ABCR_ASIZE_8BIT 0 -void davinci_nand_init(struct nand_chip *nand); - #endif diff --git a/arch/arm/mach-imx/mx6/soc.c b/arch/arm/mach-imx/mx6/soc.c index 4084ab76729..075d2467ce4 100644 --- a/arch/arm/mach-imx/mx6/soc.c +++ b/arch/arm/mach-imx/mx6/soc.c @@ -554,7 +554,7 @@ const struct boot_mode soc_boot_modes[] = { void reset_misc(void) { #ifndef CONFIG_SPL_BUILD -#ifdef CONFIG_VIDEO_MXS +#if defined(CONFIG_VIDEO_MXS) && !defined(CONFIG_DM_VIDEO) lcdif_power_down(); #endif #endif diff --git a/arch/arm/mach-keystone/mon.c b/arch/arm/mach-keystone/mon.c index 51af0285903..cc2ec885056 100644 --- a/arch/arm/mach-keystone/mon.c +++ b/arch/arm/mach-keystone/mon.c @@ -1,11 +1,11 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * K2HK: secure kernel command file + * K2x: Secure commands file * - * (C) Copyright 2012-2014 - * Texas Instruments Incorporated, <www.ti.com> + * Copyright (C) 2012-2019 Texas Instruments Incorporated - http://www.ti.com/ */ +#include <asm/unaligned.h> #include <common.h> #include <command.h> #include <mach/mon.h> @@ -120,9 +120,9 @@ void board_fit_image_post_process(void **p_image, size_t *p_size) /* * Overwrite the image headers after authentication * and decryption. Update size to reflect removal - * of header. + * of header and restore original file size. */ - *p_size -= KS2_HS_SEC_HEADER_LEN; + *p_size = get_unaligned_le32(image + (*p_size - 4)); memcpy(image, image + KS2_HS_SEC_HEADER_LEN, *p_size); /* diff --git a/arch/arm/mach-mediatek/Kconfig b/arch/arm/mach-mediatek/Kconfig index 60aef15f15e..25ef7651f0c 100644 --- a/arch/arm/mach-mediatek/Kconfig +++ b/arch/arm/mach-mediatek/Kconfig @@ -42,5 +42,6 @@ endchoice source "board/mediatek/mt7623/Kconfig" source "board/mediatek/mt7629/Kconfig" +source "board/mediatek/pumpkin/Kconfig" endif diff --git a/arch/arm/mach-meson/board-g12a.c b/arch/arm/mach-meson/board-g12a.c index 1652970fbde..546b9f60392 100644 --- a/arch/arm/mach-meson/board-g12a.c +++ b/arch/arm/mach-meson/board-g12a.c @@ -62,21 +62,21 @@ void meson_init_reserved_memory(void *fdt) phys_size_t get_effective_memsize(void) { /* Size is reported in MiB, convert it in bytes */ - return ((readl(G12A_AO_SEC_GP_CFG0) & G12A_AO_MEM_SIZE_MASK) - >> G12A_AO_MEM_SIZE_SHIFT) * SZ_1M; + return min(((readl(G12A_AO_SEC_GP_CFG0) & G12A_AO_MEM_SIZE_MASK) + >> G12A_AO_MEM_SIZE_SHIFT) * SZ_1M, 0xf5000000); } static struct mm_region g12a_mem_map[] = { { .virt = 0x0UL, .phys = 0x0UL, - .size = 0x80000000UL, + .size = 0xf5000000UL, .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | PTE_BLOCK_INNER_SHARE }, { - .virt = 0xf0000000UL, - .phys = 0xf0000000UL, - .size = 0x10000000UL, + .virt = 0xf5000000UL, + .phys = 0xf5000000UL, + .size = 0x0b000000UL, .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN @@ -129,6 +129,7 @@ void meson_eth_init(phy_interface_t mode, unsigned int flags) G12A_ETH_REG_0_TX_RATIO(4) | G12A_ETH_REG_0_PHY_CLK_EN | G12A_ETH_REG_0_CLK_EN); + g12a_enable_external_mdio(); break; case PHY_INTERFACE_MODE_RMII: diff --git a/arch/arm/mach-omap2/utils.c b/arch/arm/mach-omap2/utils.c index edf5edcb680..7d014469409 100644 --- a/arch/arm/mach-omap2/utils.c +++ b/arch/arm/mach-omap2/utils.c @@ -129,12 +129,25 @@ static inline void omap_set_fastboot_userdata_size(void) { } #endif /* CONFIG_FASTBOOT_FLASH_MMC */ + +static void omap_set_fastboot_product(void) +{ + const char *board_name; + + board_name = env_get("board_name"); + if (board_name == NULL) + printf("Warning: fastboot.product: unknown board\n"); + + env_set("fastboot.product", board_name); +} + void omap_set_fastboot_vars(void) { omap_set_fastboot_cpu(); omap_set_fastboot_secure(); omap_set_fastboot_board_rev(); omap_set_fastboot_userdata_size(); + omap_set_fastboot_product(); } #endif /* CONFIG_FASTBOOT_FLASH */ diff --git a/arch/arm/mach-rmobile/Kconfig b/arch/arm/mach-rmobile/Kconfig index aafeb355ef2..52ab8914257 100644 --- a/arch/arm/mach-rmobile/Kconfig +++ b/arch/arm/mach-rmobile/Kconfig @@ -21,6 +21,7 @@ config RCAR_GEN3 imply CMD_GPT imply CMD_UUID imply CMD_MMC_SWRITE if MMC + imply OF_BOARD_SETUP if PCI imply SUPPORT_EMMC_RPMB if MMC imply SPL imply SPL_BOARD_INIT diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index 17f31e89f35..e337d06b999 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -7,6 +7,7 @@ config ROCKCHIP_RK3036 select SPL imply USB_FUNCTION_ROCKUSB imply CMD_ROCKUSB + imply ROCKCHIP_COMMON_BOARD help The Rockchip RK3036 is a ARM-based SoC with a dual-core Cortex-A7 including NEON and GPU, Mali-400 graphics, several DDR3 options @@ -16,6 +17,7 @@ config ROCKCHIP_RK3036 config ROCKCHIP_RK3128 bool "Support Rockchip RK3128" select CPU_V7A + imply ROCKCHIP_COMMON_BOARD help The Rockchip RK3128 is a ARM-based SoC with a quad-core Cortex-A7 including NEON and GPU, Mali-400 graphics, several DDR3 options @@ -34,8 +36,10 @@ config ROCKCHIP_RK3188 select SPL_RAM select SPL_DRIVERS_MISC_SUPPORT select SPL_ROCKCHIP_EARLYRETURN_TO_BROM + select SPL_ROCKCHIP_BACK_TO_BROM select BOARD_LATE_INIT - select ROCKCHIP_BROM_HELPER + imply ROCKCHIP_COMMON_BOARD + imply SPL_ROCKCHIP_COMMON_BOARD help The Rockchip RK3188 is a ARM-based SoC with a quad-core Cortex-A9 including NEON and GPU, 512KB L2 cache, Mali-400 graphics, two @@ -57,11 +61,11 @@ config ROCKCHIP_RK322X select TPL_NEEDS_SEPARATE_TEXT_BASE if SPL select TPL_NEEDS_SEPARATE_STACK if TPL select SPL_DRIVERS_MISC_SUPPORT + imply ROCKCHIP_COMMON_BOARD imply SPL_SERIAL_SUPPORT + imply SPL_ROCKCHIP_COMMON_BOARD imply TPL_SERIAL_SUPPORT - imply TPL_BOOTROM_SUPPORT imply TPL_ROCKCHIP_COMMON_BOARD - select ROCKCHIP_BROM_HELPER select TPL_LIBCOMMON_SUPPORT select TPL_LIBGENERIC_SUPPORT help @@ -73,11 +77,11 @@ config ROCKCHIP_RK322X config ROCKCHIP_RK3288 bool "Support Rockchip RK3288" select CPU_V7A - select SPL_BOARD_INIT if SPL select SUPPORT_SPL select SPL select SUPPORT_TPL - imply TPL_BOOTROM_SUPPORT + imply ROCKCHIP_COMMON_BOARD + imply SPL_ROCKCHIP_COMMON_BOARD imply TPL_CLK imply TPL_DM imply TPL_DRIVERS_MISC_SUPPORT @@ -106,6 +110,8 @@ config ROCKCHIP_RK3328 select ARM64 select SUPPORT_SPL select SPL + imply ROCKCHIP_COMMON_BOARD + imply SPL_ROCKCHIP_COMMON_BOARD imply SPL_SERIAL_SUPPORT imply SPL_SEPARATE_BSS select ENABLE_ARM_SOC_BOOT0_HOOK @@ -125,6 +131,8 @@ config ROCKCHIP_RK3368 select SUPPORT_TPL select TPL_NEEDS_SEPARATE_TEXT_BASE if SPL select TPL_NEEDS_SEPARATE_STACK if TPL + imply ROCKCHIP_COMMON_BOARD + imply SPL_ROCKCHIP_COMMON_BOARD imply SPL_SEPARATE_BSS imply SPL_SERIAL_SUPPORT imply TPL_SERIAL_SUPPORT @@ -169,12 +177,12 @@ config ROCKCHIP_RK3399 select DM_PMIC select DM_REGULATOR_FIXED select BOARD_LATE_INIT - select ROCKCHIP_BROM_HELPER + imply ROCKCHIP_COMMON_BOARD + imply SPL_ROCKCHIP_COMMON_BOARD imply TPL_SERIAL_SUPPORT imply TPL_LIBCOMMON_SUPPORT imply TPL_LIBGENERIC_SUPPORT imply TPL_SYS_MALLOC_SIMPLE - imply TPL_BOOTROM_SUPPORT imply TPL_DRIVERS_MISC_SUPPORT imply TPL_OF_CONTROL imply TPL_DM @@ -195,6 +203,7 @@ config ROCKCHIP_RK3399 config ROCKCHIP_RV1108 bool "Support Rockchip RV1108" select CPU_V7A + imply ROCKCHIP_COMMON_BOARD help The Rockchip RV1108 is a ARM-based SoC with a single-core Cortex-A7 and a DSP. @@ -211,6 +220,7 @@ config SPL_ROCKCHIP_BACK_TO_BROM bool "SPL returns to bootrom" default y if ROCKCHIP_RK3036 select ROCKCHIP_BROM_HELPER + select SPL_BOOTROM_SUPPORT depends on SPL help Rockchip SoCs have ability to load SPL & U-Boot binary. If enabled, @@ -221,12 +231,28 @@ config TPL_ROCKCHIP_BACK_TO_BROM bool "TPL returns to bootrom" default y select ROCKCHIP_BROM_HELPER + select TPL_BOOTROM_SUPPORT depends on TPL help Rockchip SoCs have ability to load SPL & U-Boot binary. If enabled, SPL will return to the boot rom, which will then load the U-Boot binary to keep going on. +config ROCKCHIP_COMMON_BOARD + bool "Rockchip common board file" + help + Rockchip SoCs have similar boot process, Common board file is mainly + in charge of common process of board_init() and board_late_init() for + U-Boot proper. + +config SPL_ROCKCHIP_COMMON_BOARD + bool "Rockchip SPL common board file" + depends on SPL + help + Rockchip SoCs have similar boot process, SPL is mainly in charge of + load and boot Trust ATF/U-Boot firmware, and DRAM init if there is + no TPL for the board. + config TPL_ROCKCHIP_COMMON_BOARD bool "" depends on TPL diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile index a12b8d4434e..aed379a0dc6 100644 --- a/arch/arm/mach-rockchip/Makefile +++ b/arch/arm/mach-rockchip/Makefile @@ -7,16 +7,11 @@ # inaccessible/protected memory (and the bootrom-helper assumes that # the stack-pointer is valid before switching to the U-Boot stack). obj-spl-$(CONFIG_ROCKCHIP_BROM_HELPER) += bootrom.o +obj-spl-$(CONFIG_SPL_ROCKCHIP_COMMON_BOARD) += spl.o spl-boot-order.o obj-tpl-$(CONFIG_ROCKCHIP_BROM_HELPER) += bootrom.o obj-tpl-$(CONFIG_TPL_ROCKCHIP_COMMON_BOARD) += tpl.o obj-spl-$(CONFIG_ROCKCHIP_RK3036) += rk3036-board-spl.o -obj-spl-$(CONFIG_ROCKCHIP_RK3188) += rk3188-board-spl.o -obj-spl-$(CONFIG_ROCKCHIP_RK322X) += rk322x-board-spl.o spl-boot-order.o -obj-spl-$(CONFIG_ROCKCHIP_RK3288) += rk3288-board-spl.o spl-boot-order.o -obj-spl-$(CONFIG_ROCKCHIP_RK3328) += rk3328-board-spl.o -obj-spl-$(CONFIG_ROCKCHIP_RK3368) += rk3368-board-spl.o spl-boot-order.o -obj-spl-$(CONFIG_ROCKCHIP_RK3399) += rk3399-board-spl.o spl-boot-order.o ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),) @@ -25,14 +20,7 @@ ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),) # we can have the preprocessor correctly recognise both 0x0 and 0 # meaning "turn it off". obj-y += boot_mode.o - -obj-$(CONFIG_ROCKCHIP_RK3188) += rk3188-board.o -obj-$(CONFIG_ROCKCHIP_RK3128) += rk3128-board.o -obj-$(CONFIG_ROCKCHIP_RK322X) += rk322x-board.o -obj-$(CONFIG_ROCKCHIP_RK3288) += rk3288-board.o -obj-$(CONFIG_ROCKCHIP_RK3036) += rk3036-board.o -obj-$(CONFIG_ROCKCHIP_RK3399) += rk3399-board.o -obj-$(CONFIG_ROCKCHIP_RV1108) += rv1108-board.o +obj-$(CONFIG_ROCKCHIP_COMMON_BOARD) += board.o endif obj-$(CONFIG_$(SPL_TPL_)RAM) += sdram_common.o diff --git a/arch/arm/mach-rockchip/rk3036-board.c b/arch/arm/mach-rockchip/board.c index c594c4d61cd..b2a88e789d8 100644 --- a/arch/arm/mach-rockchip/rk3036-board.c +++ b/arch/arm/mach-rockchip/board.c @@ -1,19 +1,17 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * (C) Copyright 2015 Rockchip Electronics Co., Ltd + * (C) Copyright 2019 Rockchip Electronics Co., Ltd. */ - #include <common.h> #include <clk.h> #include <dm.h> #include <ram.h> -#include <asm/gpio.h> +#include <syscon.h> #include <asm/io.h> +#include <asm/arch-rockchip/boot_mode.h> #include <asm/arch-rockchip/clock.h> #include <asm/arch-rockchip/periph.h> -#include <asm/arch-rockchip/grf_rk3036.h> -#include <asm/arch-rockchip/boot_mode.h> -#include <asm/arch-rockchip/sdram_rk3036.h> +#include <power/regulator.h> DECLARE_GLOBAL_DATA_PTR; @@ -31,23 +29,18 @@ int board_late_init(void) int board_init(void) { - return 0; -} + int ret; -#if !CONFIG_IS_ENABLED(RAM) -/* - * When CONFIG_RAM is enabled, the dram_init() function is implemented - * in sdram_common.c. - */ -int dram_init(void) -{ - gd->ram_size = sdram_size(); +#ifdef CONFIG_DM_REGULATOR + ret = regulators_enable_boot_on(false); + if (ret) + debug("%s: Cannot enable boot on regulator\n", __func__); +#endif return 0; } -#endif -#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF) +#if !defined(CONFIG_SYS_DCACHE_OFF) && !defined(CONFIG_ARM64) void enable_caches(void) { /* Enable D-cache. I-cache is already enabled in start.S */ @@ -59,7 +52,7 @@ void enable_caches(void) #include <usb.h> #include <usb/dwc2_udc.h> -static struct dwc2_plat_otg_data rk3036_otg_data = { +static struct dwc2_plat_otg_data otg_data = { .rx_fifo_sz = 512, .np_tx_fifo_sz = 16, .tx_fifo_sz = 128, @@ -73,8 +66,7 @@ int board_usb_init(int index, enum usb_init_type init) const void *blob = gd->fdt_blob; /* find the usb_otg node */ - node = fdt_node_offset_by_compatible(blob, -1, - "rockchip,rk3288-usb"); + node = fdt_node_offset_by_compatible(blob, -1, "snps,dwc2"); while (node > 0) { mode = fdt_getprop(blob, node, "dr_mode", NULL); @@ -83,16 +75,15 @@ int board_usb_init(int index, enum usb_init_type init) break; } - node = fdt_node_offset_by_compatible(blob, node, - "rockchip,rk3288-usb"); + node = fdt_node_offset_by_compatible(blob, node, "snps,dwc2"); } if (!matched) { debug("Not found usb_otg device\n"); return -ENODEV; } - rk3036_otg_data.regs_otg = fdtdec_get_addr(blob, node, "reg"); + otg_data.regs_otg = fdtdec_get_addr(blob, node, "reg"); - return dwc2_udc_probe(&rk3036_otg_data); + return dwc2_udc_probe(&otg_data); } int board_usb_cleanup(int index, enum usb_init_type init) @@ -100,3 +91,14 @@ int board_usb_cleanup(int index, enum usb_init_type init) return 0; } #endif + +#if CONFIG_IS_ENABLED(FASTBOOT) +int fastboot_set_reboot_flag(void) +{ + printf("Setting reboot to fastboot flag ...\n"); + /* Set boot mode to fastboot */ + writel(BOOT_FASTBOOT, CONFIG_ROCKCHIP_BOOT_MODE_REG); + + return 0; +} +#endif diff --git a/arch/arm/mach-rockchip/fit_spl_optee.its b/arch/arm/mach-rockchip/fit_spl_optee.its index 9be4b3c8d2f..6ed5d486f2e 100644 --- a/arch/arm/mach-rockchip/fit_spl_optee.its +++ b/arch/arm/mach-rockchip/fit_spl_optee.its @@ -11,7 +11,7 @@ #address-cells = <1>; images { - uboot@1 { + uboot { description = "U-Boot"; data = /incbin/("../../../u-boot-nodtb.bin"); type = "standalone"; @@ -20,7 +20,7 @@ compression = "none"; load = <0x61000000>; }; - optee@1 { + optee { description = "OP-TEE"; data = /incbin/("../../../tee.bin"); type = "firmware"; @@ -30,7 +30,7 @@ load = <0x68400000>; entry = <0x68400000>; }; - fdt@1 { + fdt { description = "dtb"; data = /incbin/("../../../u-boot.dtb"); type = "flat_dt"; @@ -39,12 +39,12 @@ }; configurations { - default = "conf@1"; - conf@1 { + default = "conf"; + conf { description = "Rockchip armv7 with OP-TEE"; - firmware = "optee@1"; - loadables = "uboot@1"; - fdt = "fdt@1"; + firmware = "optee"; + loadables = "uboot"; + fdt = "fdt"; }; }; }; diff --git a/arch/arm/mach-rockchip/rk3036/rk3036.c b/arch/arm/mach-rockchip/rk3036/rk3036.c index 481af8a9344..be458cfb642 100644 --- a/arch/arm/mach-rockchip/rk3036/rk3036.c +++ b/arch/arm/mach-rockchip/rk3036/rk3036.c @@ -5,6 +5,9 @@ #include <asm/io.h> #include <asm/arch-rockchip/grf_rk3036.h> #include <asm/arch-rockchip/hardware.h> +#include <asm/arch-rockchip/sdram_rk3036.h> + +DECLARE_GLOBAL_DATA_PTR; #ifdef CONFIG_DEBUG_UART_BOARD_INIT void board_debug_uart_init(void) @@ -36,3 +39,16 @@ void board_debug_uart_init(void) GPIO1C2_UART2_SIN << GPIO1C2_SHIFT); } #endif + +#if !CONFIG_IS_ENABLED(RAM) +/* + * When CONFIG_RAM is enabled, the dram_init() function is implemented + * in sdram_common.c. + */ +int dram_init(void) +{ + gd->ram_size = sdram_size(); + + return 0; +} +#endif diff --git a/arch/arm/mach-rockchip/rk3128-board.c b/arch/arm/mach-rockchip/rk3128-board.c deleted file mode 100644 index 0945829d0e4..00000000000 --- a/arch/arm/mach-rockchip/rk3128-board.c +++ /dev/null @@ -1,123 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2017 Rockchip Electronics Co., Ltd. - */ -#include <common.h> -#include <clk.h> -#include <dm.h> -#include <ram.h> -#include <syscon.h> -#include <asm/io.h> -#include <asm/arch-rockchip/clock.h> -#include <asm/arch-rockchip/periph.h> -#include <asm/arch-rockchip/grf_rk3128.h> -#include <asm/arch-rockchip/boot_mode.h> -#include <power/regulator.h> - -DECLARE_GLOBAL_DATA_PTR; - -__weak int rk_board_late_init(void) -{ - return 0; -} - -int board_late_init(void) -{ - setup_boot_mode(); - - return rk_board_late_init(); -} - -int board_init(void) -{ - int ret = 0; - - ret = regulators_enable_boot_on(false); - if (ret) { - debug("%s: Cannot enable boot on regulator\n", __func__); - return ret; - } - - return 0; -} - -int dram_init_banksize(void) -{ - gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; - gd->bd->bi_dram[0].size = 0x8400000; - /* Reserve 0xe00000(14MB) for OPTEE with TA enabled, otherwise 2MB */ - gd->bd->bi_dram[1].start = CONFIG_SYS_SDRAM_BASE - + gd->bd->bi_dram[0].size + 0xe00000; - gd->bd->bi_dram[1].size = gd->bd->bi_dram[0].start - + gd->ram_size - gd->bd->bi_dram[1].start; - - return 0; -} - -#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF) -void enable_caches(void) -{ - /* Enable D-cache. I-cache is already enabled in start.S */ - dcache_enable(); -} -#endif - -#if defined(CONFIG_USB_GADGET) && defined(CONFIG_USB_GADGET_DWC2_OTG) -#include <usb.h> -#include <usb/dwc2_udc.h> - -static struct dwc2_plat_otg_data rk3128_otg_data = { - .rx_fifo_sz = 512, - .np_tx_fifo_sz = 16, - .tx_fifo_sz = 128, -}; - -int board_usb_init(int index, enum usb_init_type init) -{ - int node; - const char *mode; - bool matched = false; - const void *blob = gd->fdt_blob; - - /* find the usb_otg node */ - node = fdt_node_offset_by_compatible(blob, -1, - "rockchip,rk3128-usb"); - - while (node > 0) { - mode = fdt_getprop(blob, node, "dr_mode", NULL); - if (mode && strcmp(mode, "otg") == 0) { - matched = true; - break; - } - - node = fdt_node_offset_by_compatible(blob, node, - "rockchip,rk3128-usb"); - } - if (!matched) { - debug("Not found usb_otg device\n"); - return -ENODEV; - } - rk3128_otg_data.regs_otg = fdtdec_get_addr(blob, node, "reg"); - - return dwc2_udc_probe(&rk3128_otg_data); -} - -int board_usb_cleanup(int index, enum usb_init_type init) -{ - return 0; -} -#endif - -#if CONFIG_IS_ENABLED(FASTBOOT) -int fastboot_set_reboot_flag(void) -{ - struct rk3128_grf *grf; - - printf("Setting reboot to fastboot flag ...\n"); - grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF); - /* Set boot mode to fastboot */ - writel(BOOT_FASTBOOT, &grf->os_reg[0]); - - return 0; -} -#endif diff --git a/arch/arm/mach-rockchip/rk3128/rk3128.c b/arch/arm/mach-rockchip/rk3128/rk3128.c index 11bba148c33..ee176de80b0 100644 --- a/arch/arm/mach-rockchip/rk3128/rk3128.c +++ b/arch/arm/mach-rockchip/rk3128/rk3128.c @@ -2,6 +2,9 @@ /* * Copyright (c) 2017 Rockchip Electronics Co., Ltd */ +#include <common.h> + +DECLARE_GLOBAL_DATA_PTR; int arch_cpu_init(void) { diff --git a/arch/arm/mach-rockchip/rk3188-board-spl.c b/arch/arm/mach-rockchip/rk3188-board-spl.c deleted file mode 100644 index c3efe0d7a95..00000000000 --- a/arch/arm/mach-rockchip/rk3188-board-spl.c +++ /dev/null @@ -1,193 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2015 Google, Inc - */ - -#include <clk.h> -#include <common.h> -#include <debug_uart.h> -#include <dm.h> -#include <fdtdec.h> -#include <led.h> -#include <malloc.h> -#include <ram.h> -#include <spl.h> -#include <syscon.h> -#include <asm/gpio.h> -#include <asm/io.h> -#include <asm/arch-rockchip/bootrom.h> -#include <asm/arch-rockchip/clock.h> -#include <asm/arch-rockchip/grf_rk3188.h> -#include <asm/arch-rockchip/hardware.h> -#include <asm/arch-rockchip/periph.h> -#include <asm/arch-rockchip/pmu_rk3188.h> -#include <asm/arch-rockchip/sdram.h> -#include <dm/root.h> -#include <dm/test.h> -#include <dm/util.h> -#include <power/regulator.h> - -DECLARE_GLOBAL_DATA_PTR; - -u32 spl_boot_device(void) -{ -#if !CONFIG_IS_ENABLED(OF_PLATDATA) - const void *blob = gd->fdt_blob; - struct udevice *dev; - const char *bootdev; - int node; - int ret; - - bootdev = fdtdec_get_config_string(blob, "u-boot,boot0"); - debug("Boot device %s\n", bootdev); - if (!bootdev) - goto fallback; - - node = fdt_path_offset(blob, bootdev); - if (node < 0) { - debug("node=%d\n", node); - goto fallback; - } - ret = device_get_global_by_ofnode(offset_to_ofnode(node), &dev); - if (ret) { - debug("device at node %s/%d not found: %d\n", bootdev, node, - ret); - goto fallback; - } - debug("Found device %s\n", dev->name); - switch (device_get_uclass_id(dev)) { - case UCLASS_SPI_FLASH: - return BOOT_DEVICE_SPI; - case UCLASS_MMC: - return BOOT_DEVICE_MMC1; - default: - debug("Booting from device uclass '%s' not supported\n", - dev_get_uclass_name(dev)); - } - -fallback: -#endif - return BOOT_DEVICE_MMC1; -} - -static int setup_arm_clock(void) -{ - struct udevice *dev; - struct clk clk; - int ret; - - ret = rockchip_get_clk(&dev); - if (ret) - return ret; - - clk.id = CLK_ARM; - ret = clk_request(dev, &clk); - if (ret < 0) - return ret; - - ret = clk_set_rate(&clk, 600000000); - - clk_free(&clk); - return ret; -} - -void board_init_f(ulong dummy) -{ - struct udevice *dev; - int ret; - -#ifdef CONFIG_DEBUG_UART - /* - * Debug UART can be used from here if required: - * - * debug_uart_init(); - * printch('a'); - * printhex8(0x1234); - * printascii("string"); - */ - debug_uart_init(); - printascii("U-Boot SPL board init"); -#endif - -#ifdef CONFIG_ROCKCHIP_USB_UART - rk_clrsetreg(&grf->uoc0_con[0], - SIDDQ_MASK | UOC_DISABLE_MASK | COMMON_ON_N_MASK, - 1 << SIDDQ_SHIFT | 1 << UOC_DISABLE_SHIFT | - 1 << COMMON_ON_N_SHIFT); - rk_clrsetreg(&grf->uoc0_con[2], - SOFT_CON_SEL_MASK, 1 << SOFT_CON_SEL_SHIFT); - rk_clrsetreg(&grf->uoc0_con[3], - OPMODE_MASK | XCVRSELECT_MASK | - TERMSEL_FULLSPEED_MASK | SUSPENDN_MASK, - OPMODE_NODRIVING << OPMODE_SHIFT | - XCVRSELECT_FSTRANSC << XCVRSELECT_SHIFT | - 1 << TERMSEL_FULLSPEED_SHIFT | - 1 << SUSPENDN_SHIFT); - rk_clrsetreg(&grf->uoc0_con[0], - BYPASSSEL_MASK | BYPASSDMEN_MASK, - 1 << BYPASSSEL_SHIFT | 1 << BYPASSDMEN_SHIFT); -#endif - - ret = spl_early_init(); - if (ret) { - debug("spl_early_init() failed: %d\n", ret); - hang(); - } - - ret = rockchip_get_clk(&dev); - if (ret) { - debug("CLK init failed: %d\n", ret); - return; - } - - ret = uclass_get_device(UCLASS_RAM, 0, &dev); - if (ret) { - debug("DRAM init failed: %d\n", ret); - return; - } - - setup_arm_clock(); -#if CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM) && !defined(CONFIG_SPL_BOARD_INIT) - back_to_bootrom(BROM_BOOT_NEXTSTAGE); -#endif -} - -static int setup_led(void) -{ -#ifdef CONFIG_SPL_LED - struct udevice *dev; - char *led_name; - int ret; - - led_name = fdtdec_get_config_string(gd->fdt_blob, "u-boot,boot-led"); - if (!led_name) - return 0; - ret = led_get_by_label(led_name, &dev); - if (ret) { - debug("%s: get=%d\n", __func__, ret); - return ret; - } - ret = led_set_on(dev, 1); - if (ret) - return ret; -#endif - - return 0; -} - -void spl_board_init(void) -{ - int ret; - - ret = setup_led(); - if (ret) { - debug("LED ret=%d\n", ret); - hang(); - } - - preloader_console_init(); -#if CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM) - back_to_bootrom(BROM_BOOT_NEXTSTAGE); -#endif - return; -} diff --git a/arch/arm/mach-rockchip/rk3188-board.c b/arch/arm/mach-rockchip/rk3188-board.c deleted file mode 100644 index 94fd6c01eb7..00000000000 --- a/arch/arm/mach-rockchip/rk3188-board.c +++ /dev/null @@ -1,53 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2015 Google, Inc - */ - -#include <common.h> -#include <clk.h> -#include <dm.h> -#include <ram.h> -#include <syscon.h> -#include <asm/gpio.h> -#include <asm/io.h> -#include <asm/arch-rockchip/clock.h> -#include <asm/arch-rockchip/grf_rk3188.h> -#include <asm/arch-rockchip/periph.h> -#include <asm/arch-rockchip/pmu_rk3288.h> -#include <asm/arch-rockchip/boot_mode.h> - -__weak int rk_board_late_init(void) -{ - return 0; -} - -int board_late_init(void) -{ - struct rk3188_grf *grf; - - setup_boot_mode(); - grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF); - if (IS_ERR(grf)) { - pr_err("grf syscon returned %ld\n", PTR_ERR(grf)); - } else { - /* enable noc remap to mimic legacy loaders */ - rk_clrsetreg(&grf->soc_con0, - NOC_REMAP_MASK << NOC_REMAP_SHIFT, - NOC_REMAP_MASK << NOC_REMAP_SHIFT); - } - - return rk_board_late_init(); -} - -int board_init(void) -{ - return 0; -} - -#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF) -void enable_caches(void) -{ - /* Enable D-cache. I-cache is already enabled in start.S */ - dcache_enable(); -} -#endif diff --git a/arch/arm/mach-rockchip/rk3188/rk3188.c b/arch/arm/mach-rockchip/rk3188/rk3188.c index 933484e0df9..95f0e3ccbea 100644 --- a/arch/arm/mach-rockchip/rk3188/rk3188.c +++ b/arch/arm/mach-rockchip/rk3188/rk3188.c @@ -3,15 +3,25 @@ * (C) Copyright 2019 Rockchip Electronics Co., Ltd */ #include <common.h> +#include <dm.h> +#include <syscon.h> #include <asm/io.h> +#include <asm/arch-rockchip/bootrom.h> +#include <asm/arch-rockchip/clock.h> #include <asm/arch-rockchip/grf_rk3188.h> #include <asm/arch-rockchip/hardware.h> +#define GRF_BASE 0x20008000 + +const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = { + [BROM_BOOTSOURCE_EMMC] = "dwmmc@1021c000", + [BROM_BOOTSOURCE_SD] = "dwmmc@10214000", +}; + #ifdef CONFIG_DEBUG_UART_BOARD_INIT void board_debug_uart_init(void) { /* Enable early UART on the RK3188 */ -#define GRF_BASE 0x20008000 struct rk3188_grf * const grf = (void *)GRF_BASE; enum { GPIO1B1_SHIFT = 2, @@ -34,3 +44,77 @@ void board_debug_uart_init(void) GPIO1B0_UART2_SIN << GPIO1B0_SHIFT); } #endif + +#ifdef CONFIG_SPL_BUILD +int arch_cpu_init(void) +{ + struct rk3188_grf *grf; + + grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF); + if (IS_ERR(grf)) { + pr_err("grf syscon returned %ld\n", PTR_ERR(grf)); + return 0; + } +#ifdef CONFIG_ROCKCHIP_USB_UART + rk_clrsetreg(&grf->uoc0_con[0], + SIDDQ_MASK | UOC_DISABLE_MASK | COMMON_ON_N_MASK, + 1 << SIDDQ_SHIFT | 1 << UOC_DISABLE_SHIFT | + 1 << COMMON_ON_N_SHIFT); + rk_clrsetreg(&grf->uoc0_con[2], + SOFT_CON_SEL_MASK, 1 << SOFT_CON_SEL_SHIFT); + rk_clrsetreg(&grf->uoc0_con[3], + OPMODE_MASK | XCVRSELECT_MASK | + TERMSEL_FULLSPEED_MASK | SUSPENDN_MASK, + OPMODE_NODRIVING << OPMODE_SHIFT | + XCVRSELECT_FSTRANSC << XCVRSELECT_SHIFT | + 1 << TERMSEL_FULLSPEED_SHIFT | + 1 << SUSPENDN_SHIFT); + rk_clrsetreg(&grf->uoc0_con[0], + BYPASSSEL_MASK | BYPASSDMEN_MASK, + 1 << BYPASSSEL_SHIFT | 1 << BYPASSDMEN_SHIFT); +#endif + + /* enable noc remap to mimic legacy loaders */ + rk_clrsetreg(&grf->soc_con0, + NOC_REMAP_MASK << NOC_REMAP_SHIFT, + NOC_REMAP_MASK << NOC_REMAP_SHIFT); + + return 0; +} +#endif + +#ifdef CONFIG_SPL_BUILD +static int setup_led(void) +{ +#ifdef CONFIG_SPL_LED + struct udevice *dev; + char *led_name; + int ret; + + led_name = fdtdec_get_config_string(gd->fdt_blob, "u-boot,boot-led"); + if (!led_name) + return 0; + ret = led_get_by_label(led_name, &dev); + if (ret) { + debug("%s: get=%d\n", __func__, ret); + return ret; + } + ret = led_set_on(dev, 1); + if (ret) + return ret; +#endif + + return 0; +} + +void spl_board_init(void) +{ + int ret; + + ret = setup_led(); + if (ret) { + debug("LED ret=%d\n", ret); + hang(); + } +} +#endif diff --git a/arch/arm/mach-rockchip/rk322x-board-spl.c b/arch/arm/mach-rockchip/rk322x-board-spl.c deleted file mode 100644 index c825e31c02d..00000000000 --- a/arch/arm/mach-rockchip/rk322x-board-spl.c +++ /dev/null @@ -1,76 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2017 Rockchip Electronics Co., Ltd - */ - -#include <common.h> -#include <dm.h> -#include <spl.h> -#include <asm/io.h> -#include <asm/arch-rockchip/hardware.h> - -u32 spl_boot_device(void) -{ - return BOOT_DEVICE_MMC1; -} - -u32 spl_boot_mode(const u32 boot_device) -{ - return MMCSD_MODE_RAW; -} - -#define TIMER_LOAD_COUNT_L 0x00 -#define TIMER_LOAD_COUNT_H 0x04 -#define TIMER_CONTROL_REG 0x10 -#define TIMER_EN 0x1 -#define TIMER_FMODE BIT(0) -#define TIMER_RMODE BIT(1) - -void rockchip_stimer_init(void) -{ - /* If Timer already enabled, don't re-init it */ - u32 reg = readl(CONFIG_ROCKCHIP_STIMER_BASE + TIMER_CONTROL_REG); - - if (reg & TIMER_EN) - return; - - asm volatile("mcr p15, 0, %0, c14, c0, 0" - : : "r"(COUNTER_FREQUENCY)); - - writel(0, CONFIG_ROCKCHIP_STIMER_BASE + TIMER_CONTROL_REG); - writel(0xffffffff, CONFIG_ROCKCHIP_STIMER_BASE); - writel(0xffffffff, CONFIG_ROCKCHIP_STIMER_BASE + 4); - writel(TIMER_EN | TIMER_FMODE, CONFIG_ROCKCHIP_STIMER_BASE + - TIMER_CONTROL_REG); -} - -#define SGRF_DDR_CON0 0x10150000 -void board_init_f(ulong dummy) -{ - int ret; - - ret = spl_early_init(); - if (ret) { - printf("spl_early_init() failed: %d\n", ret); - hang(); - } - preloader_console_init(); - - /* Init secure timer */ - rockchip_stimer_init(); - /* Init ARM arch timer in arch/arm/cpu/armv7/arch_timer.c */ - timer_init(); - - /* Disable the ddr secure region setting to make it non-secure */ - rk_clrreg(SGRF_DDR_CON0, 0x4000); -} - -#ifdef CONFIG_SPL_LOAD_FIT -int board_fit_config_name_match(const char *name) -{ - /* Just empty function now - can't decide what to choose */ - debug("%s: %s\n", __func__, name); - - return 0; -} -#endif diff --git a/arch/arm/mach-rockchip/rk322x-board.c b/arch/arm/mach-rockchip/rk322x-board.c deleted file mode 100644 index e7a1e54874d..00000000000 --- a/arch/arm/mach-rockchip/rk322x-board.c +++ /dev/null @@ -1,127 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2017 Rockchip Electronics Co., Ltd. - */ -#include <common.h> -#include <clk.h> -#include <dm.h> -#include <ram.h> -#include <syscon.h> -#include <asm/io.h> -#include <asm/arch-rockchip/boot_mode.h> -#include <asm/arch-rockchip/clock.h> -#include <asm/arch-rockchip/grf_rk322x.h> -#include <asm/arch-rockchip/periph.h> - -DECLARE_GLOBAL_DATA_PTR; - -__weak int rk_board_late_init(void) -{ - return 0; -} - -int board_late_init(void) -{ - setup_boot_mode(); - - return rk_board_late_init(); -} - -int board_init(void) -{ -#include <asm/arch-rockchip/grf_rk322x.h> - /* Enable early UART2 channel 1 on the RK322x */ -#define GRF_BASE 0x11000000 - static struct rk322x_grf * const grf = (void *)GRF_BASE; - - /* - * The integrated macphy is enabled by default, disable it - * for saving power consuming. - */ - rk_clrsetreg(&grf->macphy_con[0], - MACPHY_CFG_ENABLE_MASK, - 0 << MACPHY_CFG_ENABLE_SHIFT); - - return 0; -} - -int dram_init_banksize(void) -{ - gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; - gd->bd->bi_dram[0].size = 0x8400000; - /* Reserve 0x200000 for OPTEE */ - gd->bd->bi_dram[1].start = CONFIG_SYS_SDRAM_BASE - + gd->bd->bi_dram[0].size + 0x200000; - gd->bd->bi_dram[1].size = gd->bd->bi_dram[0].start - + gd->ram_size - gd->bd->bi_dram[1].start; - - return 0; -} - -#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF) -void enable_caches(void) -{ - /* Enable D-cache. I-cache is already enabled in start.S */ - dcache_enable(); -} -#endif - -#if defined(CONFIG_USB_GADGET) && defined(CONFIG_USB_GADGET_DWC2_OTG) -#include <usb.h> -#include <usb/dwc2_udc.h> - -static struct dwc2_plat_otg_data rk322x_otg_data = { - .rx_fifo_sz = 512, - .np_tx_fifo_sz = 16, - .tx_fifo_sz = 128, -}; - -int board_usb_init(int index, enum usb_init_type init) -{ - int node; - const char *mode; - bool matched = false; - const void *blob = gd->fdt_blob; - - /* find the usb_otg node */ - node = fdt_node_offset_by_compatible(blob, -1, - "rockchip,rk3288-usb"); - - while (node > 0) { - mode = fdt_getprop(blob, node, "dr_mode", NULL); - if (mode && strcmp(mode, "otg") == 0) { - matched = true; - break; - } - - node = fdt_node_offset_by_compatible(blob, node, - "rockchip,rk3288-usb"); - } - if (!matched) { - debug("Not found usb_otg device\n"); - return -ENODEV; - } - rk322x_otg_data.regs_otg = fdtdec_get_addr(blob, node, "reg"); - - return dwc2_udc_probe(&rk322x_otg_data); -} - -int board_usb_cleanup(int index, enum usb_init_type init) -{ - return 0; -} -#endif - -#if CONFIG_IS_ENABLED(FASTBOOT) -int fastboot_set_reboot_flag(void) -{ - struct rk322x_grf *grf; - - printf("Setting reboot to fastboot flag ...\n"); - grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF); - /* Set boot mode to fastboot */ - writel(BOOT_FASTBOOT, &grf->os_reg[0]); - - return 0; -} -#endif diff --git a/arch/arm/mach-rockchip/rk322x/rk322x.c b/arch/arm/mach-rockchip/rk322x/rk322x.c index e5250bc7848..cd0bf8a70cc 100644 --- a/arch/arm/mach-rockchip/rk322x/rk322x.c +++ b/arch/arm/mach-rockchip/rk322x/rk322x.c @@ -3,9 +3,15 @@ * (C) Copyright 2019 Rockchip Electronics Co., Ltd */ #include <asm/io.h> +#include <asm/arch-rockchip/bootrom.h> #include <asm/arch-rockchip/grf_rk322x.h> #include <asm/arch-rockchip/hardware.h> +const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = { + [BROM_BOOTSOURCE_EMMC] = "dwmmc@30020000", + [BROM_BOOTSOURCE_SD] = "dwmmc@30000000", +}; + #ifdef CONFIG_DEBUG_UART_BOARD_INIT void board_debug_uart_init(void) { @@ -42,3 +48,26 @@ void board_debug_uart_init(void) CON_IOMUX_UART2SEL_21 << CON_IOMUX_UART2SEL_SHIFT); } #endif + +int arch_cpu_init(void) +{ +#ifdef CONFIG_SPL_BUILD +#define SGRF_BASE 0x10150000 + static struct rk322x_sgrf * const sgrf = (void *)SGRF_BASE; + + /* Disable the ddr secure region setting to make it non-secure */ + rk_clrreg(&sgrf->soc_con[0], 0x4000); +#else +#define GRF_BASE 0x11000000 + static struct rk322x_grf * const grf = (void *)GRF_BASE; + /* + * The integrated macphy is enabled by default, disable it + * for saving power consuming. + */ + rk_clrsetreg(&grf->macphy_con[0], + MACPHY_CFG_ENABLE_MASK, + 0 << MACPHY_CFG_ENABLE_SHIFT); + +#endif + return 0; +} diff --git a/arch/arm/mach-rockchip/rk3288-board-spl.c b/arch/arm/mach-rockchip/rk3288-board-spl.c deleted file mode 100644 index c2e168192c2..00000000000 --- a/arch/arm/mach-rockchip/rk3288-board-spl.c +++ /dev/null @@ -1,249 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2015 Google, Inc - */ - -#include <common.h> -#include <debug_uart.h> -#include <dm.h> -#include <fdtdec.h> -#include <i2c.h> -#include <led.h> -#include <malloc.h> -#include <ram.h> -#include <spl.h> -#include <asm/gpio.h> -#include <asm/io.h> -#include <asm/arch-rockchip/bootrom.h> -#include <asm/arch-rockchip/clock.h> -#include <asm/arch-rockchip/hardware.h> -#include <asm/arch-rockchip/periph.h> -#include <asm/arch-rockchip/pmu_rk3288.h> -#include <asm/arch-rockchip/sdram.h> -#include <asm/arch-rockchip/sdram_common.h> -#include <asm/arch-rockchip/sys_proto.h> -#include <dm/root.h> -#include <dm/test.h> -#include <dm/util.h> -#include <power/regulator.h> -#include <power/rk8xx_pmic.h> - -DECLARE_GLOBAL_DATA_PTR; - -u32 spl_boot_device(void) -{ -#if !CONFIG_IS_ENABLED(OF_PLATDATA) - const void *blob = gd->fdt_blob; - struct udevice *dev; - const char *bootdev; - int node; - int ret; - - bootdev = fdtdec_get_config_string(blob, "u-boot,boot0"); - debug("Boot device %s\n", bootdev); - if (!bootdev) - goto fallback; - - node = fdt_path_offset(blob, bootdev); - if (node < 0) { - debug("node=%d\n", node); - goto fallback; - } - ret = device_get_global_by_ofnode(offset_to_ofnode(node), &dev); - if (ret) { - debug("device at node %s/%d not found: %d\n", bootdev, node, - ret); - goto fallback; - } - debug("Found device %s\n", dev->name); - switch (device_get_uclass_id(dev)) { - case UCLASS_SPI_FLASH: - return BOOT_DEVICE_SPI; - case UCLASS_MMC: - return BOOT_DEVICE_MMC1; - default: - debug("Booting from device uclass '%s' not supported\n", - dev_get_uclass_name(dev)); - } - -fallback: -#elif defined(CONFIG_TARGET_CHROMEBOOK_JERRY) || \ - defined(CONFIG_TARGET_CHROMEBIT_MICKEY) || \ - defined(CONFIG_TARGET_CHROMEBOOK_MINNIE) || \ - defined(CONFIG_TARGET_CHROMEBOOK_SPEEDY) - return BOOT_DEVICE_SPI; -#endif - return BOOT_DEVICE_MMC1; -} - -#if !defined(CONFIG_SPL_OF_PLATDATA) -static int phycore_init(void) -{ - struct udevice *pmic; - int ret; - - ret = uclass_first_device_err(UCLASS_PMIC, &pmic); - if (ret) - return ret; - -#if defined(CONFIG_SPL_POWER_SUPPORT) - /* Increase USB input current to 2A */ - ret = rk818_spl_configure_usb_input_current(pmic, 2000); - if (ret) - return ret; - - /* Close charger when USB lower then 3.26V */ - ret = rk818_spl_configure_usb_chrg_shutdown(pmic, 3260000); - if (ret) - return ret; -#endif - - return 0; -} -#endif - -__weak int arch_cpu_init(void) -{ - return 0; -} - -#define TIMER_LOAD_COUNT_L 0x00 -#define TIMER_LOAD_COUNT_H 0x04 -#define TIMER_CONTROL_REG 0x10 -#define TIMER_EN 0x1 -#define TIMER_FMODE BIT(0) -#define TIMER_RMODE BIT(1) - -void rockchip_stimer_init(void) -{ - /* If Timer already enabled, don't re-init it */ - u32 reg = readl(CONFIG_ROCKCHIP_STIMER_BASE + TIMER_CONTROL_REG); - - if (reg & TIMER_EN) - return; - - asm volatile("mcr p15, 0, %0, c14, c0, 0" - : : "r"(COUNTER_FREQUENCY)); - - writel(0, CONFIG_ROCKCHIP_STIMER_BASE + TIMER_CONTROL_REG); - writel(0xffffffff, CONFIG_ROCKCHIP_STIMER_BASE); - writel(0xffffffff, CONFIG_ROCKCHIP_STIMER_BASE + 4); - writel(TIMER_EN | TIMER_FMODE, CONFIG_ROCKCHIP_STIMER_BASE + - TIMER_CONTROL_REG); -} - -void board_init_f(ulong dummy) -{ - struct udevice *dev; - int ret; - -#ifdef CONFIG_DEBUG_UART - /* - * Debug UART can be used from here if required: - * - * debug_uart_init(); - * printch('a'); - * printhex8(0x1234); - * printascii("string"); - */ - debug_uart_init(); - debug("\nspl:debug uart enabled in %s\n", __func__); -#endif - ret = spl_early_init(); - if (ret) { - debug("spl_early_init() failed: %d\n", ret); - hang(); - } - - /* Init secure timer */ - rockchip_stimer_init(); - /* Init ARM arch timer in arch/arm/cpu/armv7/arch_timer.c */ - timer_init(); - - arch_cpu_init(); - - ret = rockchip_get_clk(&dev); - if (ret) { - debug("CLK init failed: %d\n", ret); - return; - } - -#if !defined(CONFIG_SPL_OF_PLATDATA) - if (of_machine_is_compatible("phytec,rk3288-phycore-som")) { - ret = phycore_init(); - if (ret) { - debug("Failed to set up phycore power settings: %d\n", - ret); - return; - } - } -#endif - -#if !defined(CONFIG_SUPPORT_TPL) - debug("\nspl:init dram\n"); - ret = uclass_get_device(UCLASS_RAM, 0, &dev); - if (ret) { - debug("DRAM init failed: %d\n", ret); - return; - } -#endif - -#if CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM) && !defined(CONFIG_SPL_BOARD_INIT) - back_to_bootrom(BROM_BOOT_NEXTSTAGE); -#endif -} - -static int setup_led(void) -{ -#ifdef CONFIG_SPL_LED - struct udevice *dev; - char *led_name; - int ret; - - led_name = fdtdec_get_config_string(gd->fdt_blob, "u-boot,boot-led"); - if (!led_name) - return 0; - ret = led_get_by_label(led_name, &dev); - if (ret) { - debug("%s: get=%d\n", __func__, ret); - return ret; - } - ret = led_set_on(dev, 1); - if (ret) - return ret; -#endif - - return 0; -} - -void spl_board_init(void) -{ - int ret; - - ret = setup_led(); - if (ret) { - debug("LED ret=%d\n", ret); - hang(); - } - - preloader_console_init(); -#if CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM) - back_to_bootrom(BROM_BOOT_NEXTSTAGE); -#endif - return; -} - -#ifdef CONFIG_SPL_OS_BOOT - -#define PMU_BASE 0xff730000 -int dram_init_banksize(void) -{ - struct rk3288_pmu *const pmu = (void *)PMU_BASE; - size_t size = rockchip_sdram_size((phys_addr_t)&pmu->sys_reg[2]); - - gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; - gd->bd->bi_dram[0].size = size; - - return 0; -} -#endif diff --git a/arch/arm/mach-rockchip/rk3288-board.c b/arch/arm/mach-rockchip/rk3288-board.c deleted file mode 100644 index a250d503876..00000000000 --- a/arch/arm/mach-rockchip/rk3288-board.c +++ /dev/null @@ -1,320 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2015 Google, Inc - */ - -#include <common.h> -#include <clk.h> -#include <dm.h> -#include <ram.h> -#include <syscon.h> -#include <asm/io.h> -#include <asm/arch-rockchip/clock.h> -#include <asm/arch-rockchip/cru_rk3288.h> -#include <asm/arch-rockchip/periph.h> -#include <asm/arch-rockchip/pmu_rk3288.h> -#include <asm/arch-rockchip/qos_rk3288.h> -#include <asm/arch-rockchip/boot_mode.h> -#include <asm/gpio.h> -#include <dt-bindings/clock/rk3288-cru.h> -#include <power/regulator.h> - -DECLARE_GLOBAL_DATA_PTR; - -__weak int rk_board_late_init(void) -{ - return 0; -} - -int rk3288_qos_init(void) -{ - int val = 2 << PRIORITY_HIGH_SHIFT | 2 << PRIORITY_LOW_SHIFT; - /* set vop qos to higher priority */ - writel(val, CPU_AXI_QOS_PRIORITY + VIO0_VOP_QOS); - writel(val, CPU_AXI_QOS_PRIORITY + VIO1_VOP_QOS); - - if (!fdt_node_check_compatible(gd->fdt_blob, 0, - "rockchip,rk3288-tinker")) - { - /* set isp qos to higher priority */ - writel(val, CPU_AXI_QOS_PRIORITY + VIO1_ISP_R_QOS); - writel(val, CPU_AXI_QOS_PRIORITY + VIO1_ISP_W0_QOS); - writel(val, CPU_AXI_QOS_PRIORITY + VIO1_ISP_W1_QOS); - } - return 0; -} - -static void rk3288_detect_reset_reason(void) -{ - struct rk3288_cru *cru = rockchip_get_cru(); - const char *reason; - - if (IS_ERR(cru)) - return; - - switch (cru->cru_glb_rst_st) { - case GLB_POR_RST: - reason = "POR"; - break; - case FST_GLB_RST_ST: - case SND_GLB_RST_ST: - reason = "RST"; - break; - case FST_GLB_TSADC_RST_ST: - case SND_GLB_TSADC_RST_ST: - reason = "THERMAL"; - break; - case FST_GLB_WDT_RST_ST: - case SND_GLB_WDT_RST_ST: - reason = "WDOG"; - break; - default: - reason = "unknown reset"; - } - - env_set("reset_reason", reason); - - /* - * Clear cru_glb_rst_st, so we can determine the last reset cause - * for following resets. - */ - rk_clrreg(&cru->cru_glb_rst_st, GLB_RST_ST_MASK); -} - -int board_late_init(void) -{ - setup_boot_mode(); - rk3288_qos_init(); - rk3288_detect_reset_reason(); - - return rk_board_late_init(); -} - -#if !CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM) -static int veyron_init(void) -{ - struct udevice *dev; - struct clk clk; - int ret; - - ret = regulator_get_by_platname("vdd_arm", &dev); - if (ret) { - debug("Cannot set regulator name\n"); - return ret; - } - - /* Slowly raise to max CPU voltage to prevent overshoot */ - ret = regulator_set_value(dev, 1200000); - if (ret) - return ret; - udelay(175); /* Must wait for voltage to stabilize, 2mV/us */ - ret = regulator_set_value(dev, 1400000); - if (ret) - return ret; - udelay(100); /* Must wait for voltage to stabilize, 2mV/us */ - - ret = rockchip_get_clk(&clk.dev); - if (ret) - return ret; - clk.id = PLL_APLL; - ret = clk_set_rate(&clk, 1800000000); - if (IS_ERR_VALUE(ret)) - return ret; - - ret = regulator_get_by_platname("vcc33_sd", &dev); - if (ret) { - debug("Cannot get regulator name\n"); - return ret; - } - - ret = regulator_set_value(dev, 3300000); - if (ret) - return ret; - - ret = regulators_enable_boot_on(false); - if (ret) { - debug("%s: Cannot enable boot on regulators\n", __func__); - return ret; - } - - return 0; -} -#endif - -int board_init(void) -{ -#if CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM) - return 0; -#else - int ret; - - /* We do some SoC one time setting here */ - if (!fdt_node_check_compatible(gd->fdt_blob, 0, "google,veyron")) { - ret = veyron_init(); - if (ret) - return ret; - } - - return 0; -#endif -} - -#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF) -void enable_caches(void) -{ - /* Enable D-cache. I-cache is already enabled in start.S */ - dcache_enable(); -} -#endif - -#if defined(CONFIG_USB_GADGET) && defined(CONFIG_USB_GADGET_DWC2_OTG) -#include <usb.h> -#include <usb/dwc2_udc.h> - -static struct dwc2_plat_otg_data rk3288_otg_data = { - .rx_fifo_sz = 512, - .np_tx_fifo_sz = 16, - .tx_fifo_sz = 128, -}; - -int board_usb_init(int index, enum usb_init_type init) -{ - int node, phy_node; - const char *mode; - bool matched = false; - const void *blob = gd->fdt_blob; - u32 grf_phy_offset; - - /* find the usb_otg node */ - node = fdt_node_offset_by_compatible(blob, -1, - "rockchip,rk3288-usb"); - - while (node > 0) { - mode = fdt_getprop(blob, node, "dr_mode", NULL); - if (mode && strcmp(mode, "otg") == 0) { - matched = true; - break; - } - - node = fdt_node_offset_by_compatible(blob, node, - "rockchip,rk3288-usb"); - } - if (!matched) { - debug("Not found usb_otg device\n"); - return -ENODEV; - } - rk3288_otg_data.regs_otg = fdtdec_get_addr(blob, node, "reg"); - - node = fdtdec_lookup_phandle(blob, node, "phys"); - if (node <= 0) { - debug("Not found usb phy device\n"); - return -ENODEV; - } - - phy_node = fdt_parent_offset(blob, node); - if (phy_node <= 0) { - debug("Not found usb phy device\n"); - return -ENODEV; - } - - rk3288_otg_data.phy_of_node = phy_node; - grf_phy_offset = fdtdec_get_addr(blob, node, "reg"); - - /* find the grf node */ - node = fdt_node_offset_by_compatible(blob, -1, - "rockchip,rk3288-grf"); - if (node <= 0) { - debug("Not found grf device\n"); - return -ENODEV; - } - rk3288_otg_data.regs_phy = grf_phy_offset + - fdtdec_get_addr(blob, node, "reg"); - - return dwc2_udc_probe(&rk3288_otg_data); -} - -int board_usb_cleanup(int index, enum usb_init_type init) -{ - return 0; -} -#endif - -static int do_clock(cmd_tbl_t *cmdtp, int flag, int argc, - char * const argv[]) -{ - static const struct { - char *name; - int id; - } clks[] = { - { "osc", CLK_OSC }, - { "apll", CLK_ARM }, - { "dpll", CLK_DDR }, - { "cpll", CLK_CODEC }, - { "gpll", CLK_GENERAL }, -#ifdef CONFIG_ROCKCHIP_RK3036 - { "mpll", CLK_NEW }, -#else - { "npll", CLK_NEW }, -#endif - }; - int ret, i; - struct udevice *dev; - - ret = rockchip_get_clk(&dev); - if (ret) { - printf("clk-uclass not found\n"); - return 0; - } - - for (i = 0; i < ARRAY_SIZE(clks); i++) { - struct clk clk; - ulong rate; - - clk.id = clks[i].id; - ret = clk_request(dev, &clk); - if (ret < 0) - continue; - - rate = clk_get_rate(&clk); - printf("%s: %lu\n", clks[i].name, rate); - - clk_free(&clk); - } - - return 0; -} - -U_BOOT_CMD( - clock, 2, 1, do_clock, - "display information about clocks", - "" -); - -int board_early_init_f(void) -{ - const uintptr_t GRF_SOC_CON0 = 0xff770244; - const uintptr_t GRF_SOC_CON2 = 0xff77024c; - struct udevice *dev; - int ret; - - /* - * This init is done in SPL, but when chain-loading U-Boot SPL will - * have been skipped. Allow the clock driver to check if it needs - * setting up. - */ - ret = rockchip_get_clk(&dev); - if (ret) { - debug("CLK init failed: %d\n", ret); - return ret; - } - - rk_setreg(GRF_SOC_CON2, 1 << 0); - - /* - * Disable JTAG on sdmmc0 IO. The SDMMC won't work until this bit is - * cleared - */ - rk_clrreg(GRF_SOC_CON0, 1 << 12); - - return 0; -} diff --git a/arch/arm/mach-rockchip/rk3288/Kconfig b/arch/arm/mach-rockchip/rk3288/Kconfig index de8d9c24f18..87d0786ba8d 100644 --- a/arch/arm/mach-rockchip/rk3288/Kconfig +++ b/arch/arm/mach-rockchip/rk3288/Kconfig @@ -66,6 +66,7 @@ config TARGET_FENNEC_RK3288 config TARGET_FIREFLY_RK3288 bool "Firefly-RK3288" select BOARD_LATE_INIT + select SPL_BOARD_INIT if SPL help Firefly is a RK3288-based development board with 2 USB ports, HDMI, VGA, micro-SD card, audio, WiFi and Gigabit Ethernet, It @@ -84,6 +85,7 @@ config TARGET_MIQI_RK3288 config TARGET_PHYCORE_RK3288 bool "phyCORE-RK3288" select BOARD_LATE_INIT + select SPL_BOARD_INIT if SPL help Add basic support for the PCM-947 carrier board, a RK3288 based development board made by PHYTEC. This board works in a combination diff --git a/arch/arm/mach-rockchip/rk3288/rk3288.c b/arch/arm/mach-rockchip/rk3288/rk3288.c index 7552472fbc4..b462c090699 100644 --- a/arch/arm/mach-rockchip/rk3288/rk3288.c +++ b/arch/arm/mach-rockchip/rk3288/rk3288.c @@ -2,13 +2,29 @@ /* * Copyright (c) 2016 Rockchip Electronics Co., Ltd */ +#include <common.h> +#include <dm.h> +#include <clk.h> #include <asm/armv7.h> #include <asm/io.h> +#include <asm/arch-rockchip/bootrom.h> +#include <asm/arch-rockchip/clock.h> +#include <asm/arch-rockchip/cru_rk3288.h> #include <asm/arch-rockchip/hardware.h> #include <asm/arch-rockchip/grf_rk3288.h> +#include <asm/arch-rockchip/pmu_rk3288.h> +#include <asm/arch-rockchip/qos_rk3288.h> +#include <asm/arch-rockchip/sdram_common.h> + +DECLARE_GLOBAL_DATA_PTR; #define GRF_BASE 0xff770000 +const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = { + [BROM_BOOTSOURCE_EMMC] = "dwmmc@ff0f0000", + [BROM_BOOTSOURCE_SD] = "dwmmc@ff0c0000", +}; + #ifdef CONFIG_SPL_BUILD static void configure_l2ctlr(void) { @@ -30,6 +46,24 @@ static void configure_l2ctlr(void) } #endif +int rk3288_qos_init(void) +{ + int val = 2 << PRIORITY_HIGH_SHIFT | 2 << PRIORITY_LOW_SHIFT; + /* set vop qos to higher priority */ + writel(val, CPU_AXI_QOS_PRIORITY + VIO0_VOP_QOS); + writel(val, CPU_AXI_QOS_PRIORITY + VIO1_VOP_QOS); + + if (!fdt_node_check_compatible(gd->fdt_blob, 0, + "rockchip,rk3288-tinker")) { + /* set isp qos to higher priority */ + writel(val, CPU_AXI_QOS_PRIORITY + VIO1_ISP_R_QOS); + writel(val, CPU_AXI_QOS_PRIORITY + VIO1_ISP_W0_QOS); + writel(val, CPU_AXI_QOS_PRIORITY + VIO1_ISP_W1_QOS); + } + + return 0; +} + int arch_cpu_init(void) { #ifdef CONFIG_SPL_BUILD @@ -40,6 +74,14 @@ int arch_cpu_init(void) /* Use rkpwm by default */ rk_setreg(&grf->soc_con2, 1 << 0); + + /* + * Disable JTAG on sdmmc0 IO. The SDMMC won't work until this bit is + * cleared + */ + rk_clrreg(&grf->soc_con0, 1 << 12); + + rk3288_qos_init(); #endif return 0; @@ -57,3 +99,103 @@ void board_debug_uart_init(void) GPIO7C6_UART2DBG_SIN << GPIO7C6_SHIFT); } #endif + +static void rk3288_detect_reset_reason(void) +{ + struct rk3288_cru *cru = rockchip_get_cru(); + const char *reason; + + if (IS_ERR(cru)) + return; + + switch (cru->cru_glb_rst_st) { + case GLB_POR_RST: + reason = "POR"; + break; + case FST_GLB_RST_ST: + case SND_GLB_RST_ST: + reason = "RST"; + break; + case FST_GLB_TSADC_RST_ST: + case SND_GLB_TSADC_RST_ST: + reason = "THERMAL"; + break; + case FST_GLB_WDT_RST_ST: + case SND_GLB_WDT_RST_ST: + reason = "WDOG"; + break; + default: + reason = "unknown reset"; + } + + env_set("reset_reason", reason); + + /* + * Clear cru_glb_rst_st, so we can determine the last reset cause + * for following resets. + */ + rk_clrreg(&cru->cru_glb_rst_st, GLB_RST_ST_MASK); +} + +__weak int rk3288_board_late_init(void) +{ + return 0; +} + +int rk_board_late_init(void) +{ + rk3288_detect_reset_reason(); + + return rk3288_board_late_init(); +} + +static int do_clock(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) +{ + static const struct { + char *name; + int id; + } clks[] = { + { "osc", CLK_OSC }, + { "apll", CLK_ARM }, + { "dpll", CLK_DDR }, + { "cpll", CLK_CODEC }, + { "gpll", CLK_GENERAL }, +#ifdef CONFIG_ROCKCHIP_RK3036 + { "mpll", CLK_NEW }, +#else + { "npll", CLK_NEW }, +#endif + }; + int ret, i; + struct udevice *dev; + + ret = rockchip_get_clk(&dev); + if (ret) { + printf("clk-uclass not found\n"); + return 0; + } + + for (i = 0; i < ARRAY_SIZE(clks); i++) { + struct clk clk; + ulong rate; + + clk.id = clks[i].id; + ret = clk_request(dev, &clk); + if (ret < 0) + continue; + + rate = clk_get_rate(&clk); + printf("%s: %lu\n", clks[i].name, rate); + + clk_free(&clk); + } + + return 0; +} + +U_BOOT_CMD( + clock, 2, 1, do_clock, + "display information about clocks", + "" +); diff --git a/arch/arm/mach-rockchip/rk3328-board-spl.c b/arch/arm/mach-rockchip/rk3328-board-spl.c deleted file mode 100644 index f24fd89e3f1..00000000000 --- a/arch/arm/mach-rockchip/rk3328-board-spl.c +++ /dev/null @@ -1,58 +0,0 @@ -/* - * (C) Copyright 2016 Rockchip Electronics Co., Ltd - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <debug_uart.h> -#include <dm.h> -#include <ram.h> -#include <spl.h> -#include <asm/io.h> - -DECLARE_GLOBAL_DATA_PTR; - -void board_debug_uart_init(void) -{ -} - -void board_init_f(ulong dummy) -{ - struct udevice *dev; - int ret; - - ret = spl_early_init(); - if (ret) { - debug("spl_early_init() failed: %d\n", ret); - hang(); - } - - preloader_console_init(); - - ret = uclass_get_device(UCLASS_RAM, 0, &dev); - if (ret) { - debug("DRAM init failed: %d\n", ret); - return; - } -} - -u32 spl_boot_mode(const u32 boot_device) -{ - return MMCSD_MODE_RAW; -} - -u32 spl_boot_device(void) -{ - return BOOT_DEVICE_MMC1; -} - -#ifdef CONFIG_SPL_LOAD_FIT -int board_fit_config_name_match(const char *name) -{ - /* Just empty function now - can't decide what to choose */ - debug("%s: %s\n", __func__, name); - - return 0; -} -#endif diff --git a/arch/arm/mach-rockchip/rk3328/rk3328.c b/arch/arm/mach-rockchip/rk3328/rk3328.c index 1cf829dc343..592f287613b 100644 --- a/arch/arm/mach-rockchip/rk3328/rk3328.c +++ b/arch/arm/mach-rockchip/rk3328/rk3328.c @@ -4,12 +4,24 @@ */ #include <common.h> +#include <asm/arch-rockchip/bootrom.h> #include <asm/arch-rockchip/hardware.h> +#include <asm/arch-rockchip/grf_rk3328.h> +#include <asm/arch-rockchip/uart.h> #include <asm/armv8/mmu.h> #include <asm/io.h> DECLARE_GLOBAL_DATA_PTR; +#define CRU_BASE 0xFF440000 +#define GRF_BASE 0xFF100000 +#define UART2_BASE 0xFF130000 + +const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = { + [BROM_BOOTSOURCE_EMMC] = "rksdmmc@ff520000", + [BROM_BOOTSOURCE_SD] = "rksdmmc@ff500000", +}; + static struct mm_region rk3328_mem_map[] = { { .virt = 0x0UL, @@ -32,20 +44,52 @@ static struct mm_region rk3328_mem_map[] = { struct mm_region *mem_map = rk3328_mem_map; -int dram_init_banksize(void) +int arch_cpu_init(void) { - size_t max_size = min((unsigned long)gd->ram_size, gd->ram_top); - - /* Reserve 0x200000 for ATF bl31 */ - gd->bd->bi_dram[0].start = 0x200000; - gd->bd->bi_dram[0].size = max_size - gd->bd->bi_dram[0].start; + /* We do some SoC one time setting here. */ return 0; } -int arch_cpu_init(void) +void board_debug_uart_init(void) { - /* We do some SoC one time setting here. */ + struct rk3328_grf_regs * const grf = (void *)GRF_BASE; + struct rk_uart * const uart = (void *)UART2_BASE; + enum{ + GPIO2A0_SEL_SHIFT = 0, + GPIO2A0_SEL_MASK = 3 << GPIO2A0_SEL_SHIFT, + GPIO2A0_UART2_TX_M1 = 1, - return 0; + GPIO2A1_SEL_SHIFT = 2, + GPIO2A1_SEL_MASK = 3 << GPIO2A1_SEL_SHIFT, + GPIO2A1_UART2_RX_M1 = 1, + }; + enum { + IOMUX_SEL_UART2_SHIFT = 0, + IOMUX_SEL_UART2_MASK = 3 << IOMUX_SEL_UART2_SHIFT, + IOMUX_SEL_UART2_M0 = 0, + IOMUX_SEL_UART2_M1, + }; + + /* uart_sel_clk default select 24MHz */ + writel((3 << (8 + 16)) | (2 << 8), CRU_BASE + 0x148); + + /* init uart baud rate 1500000 */ + writel(0x83, &uart->lcr); + writel(0x1, &uart->rbr); + writel(0x3, &uart->lcr); + + /* Enable early UART2 */ + rk_clrsetreg(&grf->com_iomux, + IOMUX_SEL_UART2_MASK, + IOMUX_SEL_UART2_M1 << IOMUX_SEL_UART2_SHIFT); + rk_clrsetreg(&grf->gpio2a_iomux, + GPIO2A0_SEL_MASK, + GPIO2A0_UART2_TX_M1 << GPIO2A0_SEL_SHIFT); + rk_clrsetreg(&grf->gpio2a_iomux, + GPIO2A1_SEL_MASK, + GPIO2A1_UART2_RX_M1 << GPIO2A1_SEL_SHIFT); + + /* enable FIFO */ + writel(0x1, &uart->sfe); } diff --git a/arch/arm/mach-rockchip/rk3368-board-spl.c b/arch/arm/mach-rockchip/rk3368-board-spl.c deleted file mode 100644 index 6ba106c63bd..00000000000 --- a/arch/arm/mach-rockchip/rk3368-board-spl.c +++ /dev/null @@ -1,80 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH - */ - -#include <common.h> -#include <debug_uart.h> -#include <dm.h> -#include <ram.h> -#include <spl.h> -#include <asm/io.h> -#include <asm/arch-rockchip/periph.h> - -__weak int arch_cpu_init(void) -{ - return 0; -} - -#define TIMER_LOAD_COUNT_L 0x00 -#define TIMER_LOAD_COUNT_H 0x04 -#define TIMER_CONTROL_REG 0x10 -#define TIMER_EN 0x1 -#define TIMER_FMODE BIT(0) -#define TIMER_RMODE BIT(1) - -void rockchip_stimer_init(void) -{ - /* If Timer already enabled, don't re-init it */ - u32 reg = readl(CONFIG_ROCKCHIP_STIMER_BASE + TIMER_CONTROL_REG); - - if (reg & TIMER_EN) - return; - - writel(0, CONFIG_ROCKCHIP_STIMER_BASE + TIMER_CONTROL_REG); - writel(0xffffffff, CONFIG_ROCKCHIP_STIMER_BASE); - writel(0xffffffff, CONFIG_ROCKCHIP_STIMER_BASE + 4); - writel(TIMER_EN | TIMER_FMODE, CONFIG_ROCKCHIP_STIMER_BASE + - TIMER_CONTROL_REG); -} - -void board_init_f(ulong dummy) -{ - struct udevice *dev; - int ret; - - ret = spl_early_init(); - if (ret) { - debug("spl_early_init() failed: %d\n", ret); - hang(); - } - - /* Init secure timer */ - rockchip_stimer_init(); - /* Init ARM arch timer in arch/arm/cpu/armv7/arch_timer.c */ - timer_init(); - - arch_cpu_init(); - preloader_console_init(); - - ret = uclass_get_device(UCLASS_RAM, 0, &dev); - if (ret) { - debug("DRAM init failed: %d\n", ret); - return; - } -} - -u32 spl_boot_device(void) -{ - return BOOT_DEVICE_MMC1; -} - -#ifdef CONFIG_SPL_LOAD_FIT -int board_fit_config_name_match(const char *name) -{ - /* Just empty function now - can't decide what to choose */ - debug("%s: %s\n", __func__, name); - - return 0; -} -#endif diff --git a/arch/arm/mach-rockchip/rk3368/rk3368.c b/arch/arm/mach-rockchip/rk3368/rk3368.c index 47786f52ee3..7ccd417a18c 100644 --- a/arch/arm/mach-rockchip/rk3368/rk3368.c +++ b/arch/arm/mach-rockchip/rk3368/rk3368.c @@ -8,6 +8,7 @@ #include <syscon.h> #include <asm/armv8/mmu.h> #include <asm/io.h> +#include <asm/arch-rockchip/bootrom.h> #include <asm/arch-rockchip/clock.h> #include <asm/arch-rockchip/cru_rk3368.h> #include <asm/arch-rockchip/grf_rk3368.h> @@ -52,16 +53,10 @@ static struct mm_region rk3368_mem_map[] = { struct mm_region *mem_map = rk3368_mem_map; -int dram_init_banksize(void) -{ - size_t max_size = min((unsigned long)gd->ram_size, gd->ram_top); - - /* Reserve 0x200000 for ATF bl31 */ - gd->bd->bi_dram[0].start = 0x200000; - gd->bd->bi_dram[0].size = max_size - gd->bd->bi_dram[0].start; - - return 0; -} +const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = { + [BROM_BOOTSOURCE_EMMC] = "dwmmc@ff0f0000", + [BROM_BOOTSOURCE_SD] = "dwmmc@ff0c0000", +}; #ifdef CONFIG_ARCH_EARLY_INIT_R static int mcu_init(void) diff --git a/arch/arm/mach-rockchip/rk3399-board-spl.c b/arch/arm/mach-rockchip/rk3399-board-spl.c deleted file mode 100644 index 7154d8e5d08..00000000000 --- a/arch/arm/mach-rockchip/rk3399-board-spl.c +++ /dev/null @@ -1,251 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2016 Rockchip Electronics Co., Ltd - * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH - */ - -#include <common.h> -#include <debug_uart.h> -#include <dm.h> -#include <ram.h> -#include <spl.h> -#include <spl_gpio.h> -#include <syscon.h> -#include <asm/gpio.h> -#include <asm/io.h> -#include <asm/arch-rockchip/bootrom.h> -#include <asm/arch-rockchip/clock.h> -#include <asm/arch-rockchip/cru_rk3399.h> -#include <asm/arch-rockchip/grf_rk3399.h> -#include <asm/arch-rockchip/hardware.h> -#include <asm/arch-rockchip/periph.h> -#include <asm/arch-rockchip/sys_proto.h> -#include <power/regulator.h> - -void board_return_to_bootrom(void) -{ - back_to_bootrom(BROM_BOOT_NEXTSTAGE); -} - -static const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = { - [BROM_BOOTSOURCE_EMMC] = "/sdhci@fe330000", - [BROM_BOOTSOURCE_SPINOR] = "/spi@ff1d0000", - [BROM_BOOTSOURCE_SD] = "/dwmmc@fe320000", -}; - -const char *board_spl_was_booted_from(void) -{ - u32 bootdevice_brom_id = readl(RK3399_BROM_BOOTSOURCE_ID_ADDR); - const char *bootdevice_ofpath = NULL; - - if (bootdevice_brom_id < ARRAY_SIZE(boot_devices)) - bootdevice_ofpath = boot_devices[bootdevice_brom_id]; - - if (bootdevice_ofpath) - debug("%s: brom_bootdevice_id %x maps to '%s'\n", - __func__, bootdevice_brom_id, bootdevice_ofpath); - else - debug("%s: failed to resolve brom_bootdevice_id %x\n", - __func__, bootdevice_brom_id); - - return bootdevice_ofpath; -} - -u32 spl_boot_device(void) -{ - u32 boot_device = BOOT_DEVICE_MMC1; - - if (CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM)) - return BOOT_DEVICE_BOOTROM; - - return boot_device; -} - -const char *spl_decode_boot_device(u32 boot_device) -{ - int i; - static const struct { - u32 boot_device; - const char *ofpath; - } spl_boot_devices_tbl[] = { - { BOOT_DEVICE_MMC1, "/dwmmc@fe320000" }, - { BOOT_DEVICE_MMC2, "/sdhci@fe330000" }, - { BOOT_DEVICE_SPI, "/spi@ff1d0000" }, - }; - - for (i = 0; i < ARRAY_SIZE(spl_boot_devices_tbl); ++i) - if (spl_boot_devices_tbl[i].boot_device == boot_device) - return spl_boot_devices_tbl[i].ofpath; - - return NULL; -} - -void spl_perform_fixups(struct spl_image_info *spl_image) -{ - void *blob = spl_image->fdt_addr; - const char *boot_ofpath; - int chosen; - - /* - * Inject the ofpath of the device the full U-Boot (or Linux in - * Falcon-mode) was booted from into the FDT, if a FDT has been - * loaded at the same time. - */ - if (!blob) - return; - - boot_ofpath = spl_decode_boot_device(spl_image->boot_device); - if (!boot_ofpath) { - pr_err("%s: could not map boot_device to ofpath\n", __func__); - return; - } - - chosen = fdt_find_or_add_subnode(blob, 0, "chosen"); - if (chosen < 0) { - pr_err("%s: could not find/create '/chosen'\n", __func__); - return; - } - fdt_setprop_string(blob, chosen, - "u-boot,spl-boot-device", boot_ofpath); -} - -__weak void rockchip_stimer_init(void) -{ -} - -void board_init_f(ulong dummy) -{ - struct udevice *dev; - struct rk3399_pmusgrf_regs *sgrf; - struct rk3399_grf_regs *grf; - int ret; - -#ifdef CONFIG_DEBUG_UART - debug_uart_init(); - -# ifdef CONFIG_TARGET_CHROMEBOOK_BOB - int sum, i; - - /* - * Add a delay and ensure that the compiler does not optimise this out. - * This is needed since the power rails tail a while to turn on, and - * we get garbage serial output otherwise. - */ - sum = 0; - for (i = 0; i < 150000; i++) - sum += i; - gru_dummy_function(sum); -#endif /* CONFIG_TARGET_CHROMEBOOK_BOB */ - - /* - * Debug UART can be used from here if required: - * - * debug_uart_init(); - * printch('a'); - * printhex8(0x1234); - * printascii("string"); - */ - debug("U-Boot SPL board init\n"); -#endif - - ret = spl_early_init(); - if (ret) { - debug("spl_early_init() failed: %d\n", ret); - hang(); - } - - /* - * Disable DDR and SRAM security regions. - * - * As we are entered from the BootROM, the region from - * 0x0 through 0xfffff (i.e. the first MB of memory) will - * be protected. This will cause issues with the DW_MMC - * driver, which tries to DMA from/to the stack (likely) - * located in this range. - */ - sgrf = syscon_get_first_range(ROCKCHIP_SYSCON_PMUSGRF); - rk_clrsetreg(&sgrf->ddr_rgn_con[16], 0x1ff, 0); - rk_clrreg(&sgrf->slv_secure_con4, 0x2000); - - /* eMMC clock generator: disable the clock multipilier */ - grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF); - rk_clrreg(&grf->emmccore_con[11], 0x0ff); - - rockchip_stimer_init(); - - ret = uclass_get_device(UCLASS_RAM, 0, &dev); - if (ret) { - pr_err("DRAM init failed: %d\n", ret); - return; - } -} - -#if defined(SPL_GPIO_SUPPORT) -static void rk3399_force_power_on_reset(void) -{ - ofnode node; - struct gpio_desc sysreset_gpio; - - debug("%s: trying to force a power-on reset\n", __func__); - - node = ofnode_path("/config"); - if (!ofnode_valid(node)) { - debug("%s: no /config node?\n", __func__); - return; - } - - if (gpio_request_by_name_nodev(node, "sysreset-gpio", 0, - &sysreset_gpio, GPIOD_IS_OUT)) { - debug("%s: could not find a /config/sysreset-gpio\n", __func__); - return; - } - - dm_gpio_set_value(&sysreset_gpio, 1); -} -#endif - -void spl_board_init(void) -{ -#if defined(SPL_GPIO_SUPPORT) - struct rk3399_cru *cru = rockchip_get_cru(); - - /* - * The RK3399 resets only 'almost all logic' (see also in the TRM - * "3.9.4 Global software reset"), when issuing a software reset. - * This may cause issues during boot-up for some configurations of - * the application software stack. - * - * To work around this, we test whether the last reset reason was - * a power-on reset and (if not) issue an overtemp-reset to reset - * the entire module. - * - * While this was previously fixed by modifying the various places - * that could generate a software reset (e.g. U-Boot's sysreset - * driver, the ATF or Linux), we now have it here to ensure that - * we no longer have to track this through the various components. - */ - if (cru->glb_rst_st != 0) - rk3399_force_power_on_reset(); -#endif - -#if defined(SPL_DM_REGULATOR) - /* - * Turning the eMMC and SPI back on (if disabled via the Qseven - * BIOS_ENABLE) signal is done through a always-on regulator). - */ - if (regulators_enable_boot_on(false)) - debug("%s: Cannot enable boot on regulator\n", __func__); -#endif - - preloader_console_init(); -} - -#ifdef CONFIG_SPL_LOAD_FIT -int board_fit_config_name_match(const char *name) -{ - /* Just empty function now - can't decide what to choose */ - debug("%s: %s\n", __func__, name); - - return 0; -} -#endif diff --git a/arch/arm/mach-rockchip/rk3399-board.c b/arch/arm/mach-rockchip/rk3399-board.c deleted file mode 100644 index 443c87cccce..00000000000 --- a/arch/arm/mach-rockchip/rk3399-board.c +++ /dev/null @@ -1,13 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (c) 2017 Rockchip Electronics Co., Ltd - */ - -#include <common.h> -#include <asm/arch-rockchip/boot_mode.h> - -int board_late_init(void) -{ - setup_boot_mode(); - return 0; -} diff --git a/arch/arm/mach-rockchip/rk3399/rk3399.c b/arch/arm/mach-rockchip/rk3399/rk3399.c index 0f09ea5c499..863024d0710 100644 --- a/arch/arm/mach-rockchip/rk3399/rk3399.c +++ b/arch/arm/mach-rockchip/rk3399/rk3399.c @@ -4,18 +4,29 @@ */ #include <common.h> +#include <spl.h> #include <spl_gpio.h> +#include <syscon.h> #include <asm/armv8/mmu.h> #include <asm/io.h> +#include <asm/arch-rockchip/bootrom.h> +#include <asm/arch-rockchip/clock.h> #include <asm/arch-rockchip/gpio.h> #include <asm/arch-rockchip/grf_rk3399.h> #include <asm/arch-rockchip/hardware.h> +#include <power/regulator.h> DECLARE_GLOBAL_DATA_PTR; #define GRF_EMMCCORE_CON11 0xff77f02c #define GRF_BASE 0xff770000 +const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = { + [BROM_BOOTSOURCE_EMMC] = "/sdhci@fe330000", + [BROM_BOOTSOURCE_SPINOR] = "/spi@ff1d0000", + [BROM_BOOTSOURCE_SD] = "/dwmmc@fe320000", +}; + static struct mm_region rk3399_mem_map[] = { { .virt = 0x0UL, @@ -67,24 +78,30 @@ void rockchip_stimer_init(void) } #endif -int dram_init_banksize(void) +int arch_cpu_init(void) { - size_t max_size = min((unsigned long)gd->ram_size, gd->ram_top); - - /* Reserve 0x200000 for ATF bl31 */ - gd->bd->bi_dram[0].start = 0x200000; - gd->bd->bi_dram[0].size = max_size - gd->bd->bi_dram[0].start; - return 0; -} +#ifdef CONFIG_SPL_BUILD + struct rk3399_pmusgrf_regs *sgrf; + struct rk3399_grf_regs *grf; -int arch_cpu_init(void) -{ - /* We do some SoC one time setting here. */ - struct rk3399_grf_regs * const grf = (void *)GRF_BASE; + /* + * Disable DDR and SRAM security regions. + * + * As we are entered from the BootROM, the region from + * 0x0 through 0xfffff (i.e. the first MB of memory) will + * be protected. This will cause issues with the DW_MMC + * driver, which tries to DMA from/to the stack (likely) + * located in this range. + */ + sgrf = syscon_get_first_range(ROCKCHIP_SYSCON_PMUSGRF); + rk_clrsetreg(&sgrf->ddr_rgn_con[16], 0x1ff, 0); + rk_clrreg(&sgrf->slv_secure_con4, 0x2000); - /* Emmc clock generator: disable the clock multipilier */ + /* eMMC clock generator: disable the clock multipilier */ + grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF); rk_clrreg(&grf->emmccore_con[11], 0x0ff); +#endif return 0; } @@ -146,3 +163,111 @@ void board_debug_uart_init(void) #endif } #endif + +#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_TPL_BUILD) +const char *spl_decode_boot_device(u32 boot_device) +{ + int i; + static const struct { + u32 boot_device; + const char *ofpath; + } spl_boot_devices_tbl[] = { + { BOOT_DEVICE_MMC1, "/dwmmc@fe320000" }, + { BOOT_DEVICE_MMC2, "/sdhci@fe330000" }, + { BOOT_DEVICE_SPI, "/spi@ff1d0000" }, + }; + + for (i = 0; i < ARRAY_SIZE(spl_boot_devices_tbl); ++i) + if (spl_boot_devices_tbl[i].boot_device == boot_device) + return spl_boot_devices_tbl[i].ofpath; + + return NULL; +} + +void spl_perform_fixups(struct spl_image_info *spl_image) +{ + void *blob = spl_image->fdt_addr; + const char *boot_ofpath; + int chosen; + + /* + * Inject the ofpath of the device the full U-Boot (or Linux in + * Falcon-mode) was booted from into the FDT, if a FDT has been + * loaded at the same time. + */ + if (!blob) + return; + + boot_ofpath = spl_decode_boot_device(spl_image->boot_device); + if (!boot_ofpath) { + pr_err("%s: could not map boot_device to ofpath\n", __func__); + return; + } + + chosen = fdt_find_or_add_subnode(blob, 0, "chosen"); + if (chosen < 0) { + pr_err("%s: could not find/create '/chosen'\n", __func__); + return; + } + fdt_setprop_string(blob, chosen, + "u-boot,spl-boot-device", boot_ofpath); +} + +#if defined(SPL_GPIO_SUPPORT) +static void rk3399_force_power_on_reset(void) +{ + ofnode node; + struct gpio_desc sysreset_gpio; + + debug("%s: trying to force a power-on reset\n", __func__); + + node = ofnode_path("/config"); + if (!ofnode_valid(node)) { + debug("%s: no /config node?\n", __func__); + return; + } + + if (gpio_request_by_name_nodev(node, "sysreset-gpio", 0, + &sysreset_gpio, GPIOD_IS_OUT)) { + debug("%s: could not find a /config/sysreset-gpio\n", __func__); + return; + } + + dm_gpio_set_value(&sysreset_gpio, 1); +} +#endif + +void spl_board_init(void) +{ +#if defined(SPL_GPIO_SUPPORT) + struct rk3399_cru *cru = rockchip_get_cru(); + + /* + * The RK3399 resets only 'almost all logic' (see also in the TRM + * "3.9.4 Global software reset"), when issuing a software reset. + * This may cause issues during boot-up for some configurations of + * the application software stack. + * + * To work around this, we test whether the last reset reason was + * a power-on reset and (if not) issue an overtemp-reset to reset + * the entire module. + * + * While this was previously fixed by modifying the various places + * that could generate a software reset (e.g. U-Boot's sysreset + * driver, the ATF or Linux), we now have it here to ensure that + * we no longer have to track this through the various components. + */ + if (cru->glb_rst_st != 0) + rk3399_force_power_on_reset(); +#endif + +#if defined(SPL_DM_REGULATOR) + /* + * Turning the eMMC and SPI back on (if disabled via the Qseven + * BIOS_ENABLE) signal is done through a always-on regulator). + */ + if (regulators_enable_boot_on(false)) + debug("%s: Cannot enable boot on regulator\n", __func__); +#endif +} +#endif diff --git a/arch/arm/mach-rockchip/rv1108-board.c b/arch/arm/mach-rockchip/rv1108-board.c deleted file mode 100644 index 3412f2c063a..00000000000 --- a/arch/arm/mach-rockchip/rv1108-board.c +++ /dev/null @@ -1,81 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2015 Google, Inc - */ - -#include <common.h> - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_USB_GADGET) && defined(CONFIG_USB_GADGET_DWC2_OTG) -#include <usb.h> -#include <usb/dwc2_udc.h> - -static struct dwc2_plat_otg_data rv1108_otg_data = { - .rx_fifo_sz = 512, - .np_tx_fifo_sz = 16, - .tx_fifo_sz = 128, -}; - -int board_usb_init(int index, enum usb_init_type init) -{ - const void *blob = gd->fdt_blob; - bool matched = false; - int node, phy_node; - u32 grf_phy_offset; - const char *mode; - - /* find the usb_otg node */ - node = fdt_node_offset_by_compatible(blob, -1, "rockchip,rk3066-usb"); - while (node > 0) { - mode = fdt_getprop(blob, node, "dr_mode", NULL); - if (mode && strcmp(mode, "otg") == 0) { - matched = true; - break; - } - - node = fdt_node_offset_by_compatible(blob, node, - "rockchip,rk3066-usb"); - } - - if (!matched) { - debug("usb_otg device not found\n"); - return -ENODEV; - } - - rv1108_otg_data.regs_otg = fdtdec_get_addr(blob, node, "reg"); - - node = fdtdec_lookup_phandle(blob, node, "phys"); - if (node <= 0) { - debug("phys node not found\n"); - return -ENODEV; - } - - phy_node = fdt_parent_offset(blob, node); - if (phy_node <= 0) { - debug("usb phy node not found\n"); - return -ENODEV; - } - - rv1108_otg_data.phy_of_node = phy_node; - grf_phy_offset = fdtdec_get_addr(blob, node, "reg"); - - /* find the grf node */ - node = fdt_node_offset_by_compatible(blob, -1, - "rockchip,rv1108-grf"); - if (node <= 0) { - debug("grf node not found\n"); - return -ENODEV; - } - - rv1108_otg_data.regs_phy = grf_phy_offset + fdtdec_get_addr(blob, node, - "reg"); - - return dwc2_udc_probe(&rv1108_otg_data); -} - -int board_usb_cleanup(int index, enum usb_init_type init) -{ - return 0; -} -#endif diff --git a/arch/arm/mach-rockchip/rv1108/rv1108.c b/arch/arm/mach-rockchip/rv1108/rv1108.c index 66aeb3ffcc9..6362af995bc 100644 --- a/arch/arm/mach-rockchip/rv1108/rv1108.c +++ b/arch/arm/mach-rockchip/rv1108/rv1108.c @@ -3,13 +3,3 @@ * (C) Copyright 2016 Rockchip Electronics Co., Ltd * Author: Andy Yan <andy.yan@rock-chips.com> */ - -#include <common.h> - -#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF) -void enable_caches(void) -{ - /* Enable D-cache. I-cache is already enabled in start.S */ - dcache_enable(); -} -#endif diff --git a/arch/arm/mach-rockchip/sdram_common.c b/arch/arm/mach-rockchip/sdram_common.c index 8684dbd4fa6..22a4aca9402 100644 --- a/arch/arm/mach-rockchip/sdram_common.c +++ b/arch/arm/mach-rockchip/sdram_common.c @@ -11,6 +11,69 @@ #include <dm/uclass-internal.h> DECLARE_GLOBAL_DATA_PTR; + +#define TRUST_PARAMETER_OFFSET (34 * 1024 * 1024) + +struct tos_parameter_t { + u32 version; + u32 checksum; + struct { + char name[8]; + s64 phy_addr; + u32 size; + u32 flags; + } tee_mem; + struct { + char name[8]; + s64 phy_addr; + u32 size; + u32 flags; + } drm_mem; + s64 reserve[8]; +}; + +int dram_init_banksize(void) +{ + size_t top = min((unsigned long)(gd->ram_size + CONFIG_SYS_SDRAM_BASE), + gd->ram_top); + +#ifdef CONFIG_ARM64 + /* Reserve 0x200000 for ATF bl31 */ + gd->bd->bi_dram[0].start = 0x200000; + gd->bd->bi_dram[0].size = top - gd->bd->bi_dram[0].start; +#else +#ifdef CONFIG_SPL_OPTEE + struct tos_parameter_t *tos_parameter; + + tos_parameter = (struct tos_parameter_t *)(CONFIG_SYS_SDRAM_BASE + + TRUST_PARAMETER_OFFSET); + + if (tos_parameter->tee_mem.flags == 1) { + gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; + gd->bd->bi_dram[0].size = tos_parameter->tee_mem.phy_addr + - CONFIG_SYS_SDRAM_BASE; + gd->bd->bi_dram[1].start = tos_parameter->tee_mem.phy_addr + + tos_parameter->tee_mem.size; + gd->bd->bi_dram[1].size = gd->bd->bi_dram[0].start + + top - gd->bd->bi_dram[1].start; + } else { + gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; + gd->bd->bi_dram[0].size = 0x8400000; + /* Reserve 32M for OPTEE with TA */ + gd->bd->bi_dram[1].start = CONFIG_SYS_SDRAM_BASE + + gd->bd->bi_dram[0].size + 0x2000000; + gd->bd->bi_dram[1].size = gd->bd->bi_dram[0].start + + top - gd->bd->bi_dram[1].start; + } +#else + gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; + gd->bd->bi_dram[0].size = top - gd->bd->bi_dram[0].start; +#endif +#endif + + return 0; +} + size_t rockchip_sdram_size(phys_addr_t reg) { u32 rank, col, bk, cs0_row, cs1_row, bw, row_3_4; diff --git a/arch/arm/mach-rockchip/spl.c b/arch/arm/mach-rockchip/spl.c new file mode 100644 index 00000000000..33137cc5ef4 --- /dev/null +++ b/arch/arm/mach-rockchip/spl.c @@ -0,0 +1,154 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2019 Rockchip Electronics Co., Ltd + */ + +#include <common.h> +#include <debug_uart.h> +#include <dm.h> +#include <ram.h> +#include <spl.h> +#include <asm/arch-rockchip/bootrom.h> +#include <asm/arch-rockchip/sdram.h> +#include <asm/io.h> + +DECLARE_GLOBAL_DATA_PTR; + +void board_return_to_bootrom(void) +{ + back_to_bootrom(BROM_BOOT_NEXTSTAGE); +} + +__weak const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = { +}; + +const char *board_spl_was_booted_from(void) +{ + u32 bootdevice_brom_id = readl(BROM_BOOTSOURCE_ID_ADDR); + const char *bootdevice_ofpath = NULL; + + if (bootdevice_brom_id < ARRAY_SIZE(boot_devices)) + bootdevice_ofpath = boot_devices[bootdevice_brom_id]; + + if (bootdevice_ofpath) + debug("%s: brom_bootdevice_id %x maps to '%s'\n", + __func__, bootdevice_brom_id, bootdevice_ofpath); + else + debug("%s: failed to resolve brom_bootdevice_id %x\n", + __func__, bootdevice_brom_id); + + return bootdevice_ofpath; +} + +u32 spl_boot_device(void) +{ + u32 boot_device = BOOT_DEVICE_MMC1; + +#if defined(CONFIG_TARGET_CHROMEBOOK_JERRY) || \ + defined(CONFIG_TARGET_CHROMEBIT_MICKEY) || \ + defined(CONFIG_TARGET_CHROMEBOOK_MINNIE) + return BOOT_DEVICE_SPI; +#endif + if (CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM)) + return BOOT_DEVICE_BOOTROM; + + return boot_device; +} + +u32 spl_boot_mode(const u32 boot_device) +{ + return MMCSD_MODE_RAW; +} + +#if !defined(CONFIG_ROCKCHIP_RK3188) +#define TIMER_LOAD_COUNT_L 0x00 +#define TIMER_LOAD_COUNT_H 0x04 +#define TIMER_CONTROL_REG 0x10 +#define TIMER_EN 0x1 +#define TIMER_FMODE BIT(0) +#define TIMER_RMODE BIT(1) + +__weak void rockchip_stimer_init(void) +{ + /* If Timer already enabled, don't re-init it */ + u32 reg = readl(CONFIG_ROCKCHIP_STIMER_BASE + TIMER_CONTROL_REG); + + if (reg & TIMER_EN) + return; +#ifndef CONFIG_ARM64 + asm volatile("mcr p15, 0, %0, c14, c0, 0" + : : "r"(COUNTER_FREQUENCY)); +#endif + writel(0, CONFIG_ROCKCHIP_STIMER_BASE + TIMER_CONTROL_REG); + writel(0xffffffff, CONFIG_ROCKCHIP_STIMER_BASE); + writel(0xffffffff, CONFIG_ROCKCHIP_STIMER_BASE + 4); + writel(TIMER_EN | TIMER_FMODE, CONFIG_ROCKCHIP_STIMER_BASE + + TIMER_CONTROL_REG); +} +#endif + +__weak int board_early_init_f(void) +{ + return 0; +} + +__weak int arch_cpu_init(void) +{ + return 0; +} + +void board_init_f(ulong dummy) +{ + int ret; +#if !defined(CONFIG_SUPPORT_TPL) || defined(CONFIG_SPL_OS_BOOT) + struct udevice *dev; +#endif + +#ifdef CONFIG_DEBUG_UART + /* + * Debug UART can be used from here if required: + * + * debug_uart_init(); + * printch('a'); + * printhex8(0x1234); + * printascii("string"); + */ + debug_uart_init(); + debug("\nspl:debug uart enabled in %s\n", __func__); +#endif + + board_early_init_f(); + + ret = spl_early_init(); + if (ret) { + printf("spl_early_init() failed: %d\n", ret); + hang(); + } + arch_cpu_init(); +#if !defined(CONFIG_SUPPORT_TPL) || defined(CONFIG_SPL_OS_BOOT) + debug("\nspl:init dram\n"); + ret = uclass_get_device(UCLASS_RAM, 0, &dev); + if (ret) { + printf("DRAM init failed: %d\n", ret); + return; + } +#endif +#if !defined(CONFIG_ROCKCHIP_RK3188) + rockchip_stimer_init(); +#endif +#ifdef CONFIG_SYS_ARCH_TIMER + /* Init ARM arch timer in arch/arm/cpu/armv7/arch_timer.c */ + timer_init(); +#endif + preloader_console_init(); +} + +#ifdef CONFIG_SPL_LOAD_FIT +int board_fit_config_name_match(const char *name) +{ + /* Just empty function now - can't decide what to choose */ + debug("%s: %s\n", __func__, name); + + return 0; +} +#endif diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile index e66720447f8..fc1181cb278 100644 --- a/arch/arm/mach-socfpga/Makefile +++ b/arch/arm/mach-socfpga/Makefile @@ -8,7 +8,6 @@ obj-y += board.o obj-y += clock_manager.o obj-y += misc.o -obj-y += reset_manager.o ifdef CONFIG_TARGET_SOCFPGA_GEN5 obj-y += clock_manager_gen5.o diff --git a/arch/arm/mach-socfpga/include/mach/reset_manager.h b/arch/arm/mach-socfpga/include/mach/reset_manager.h index 42beaecdd6b..6ad037e325d 100644 --- a/arch/arm/mach-socfpga/include/mach/reset_manager.h +++ b/arch/arm/mach-socfpga/include/mach/reset_manager.h @@ -11,6 +11,7 @@ void reset_cpu(ulong addr); void socfpga_per_reset(u32 reset, int set); void socfpga_per_reset_all(void); +#define RSTMGR_CTRL_SWCOLDRSTREQ_LSB 0 #define RSTMGR_CTRL_SWWARMRSTREQ_LSB 1 /* diff --git a/arch/arm/mach-socfpga/reset_manager.c b/arch/arm/mach-socfpga/reset_manager.c deleted file mode 100644 index e0a01ed07a5..00000000000 --- a/arch/arm/mach-socfpga/reset_manager.c +++ /dev/null @@ -1,41 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2013 Altera Corporation <www.altera.com> - */ - - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/reset_manager.h> - -#if defined(CONFIG_TARGET_SOCFPGA_STRATIX10) -#include <asm/arch/mailbox_s10.h> -#endif - -DECLARE_GLOBAL_DATA_PTR; - -#if !defined(CONFIG_TARGET_SOCFPGA_STRATIX10) -static const struct socfpga_reset_manager *reset_manager_base = - (void *)SOCFPGA_RSTMGR_ADDRESS; -#endif - -/* - * Write the reset manager register to cause reset - */ -void reset_cpu(ulong addr) -{ - /* request a warm reset */ -#if defined(CONFIG_TARGET_SOCFPGA_STRATIX10) - puts("Mailbox: Issuing mailbox cmd REBOOT_HPS\n"); - mbox_reset_cold(); -#else - writel(1 << RSTMGR_CTRL_SWWARMRSTREQ_LSB, - &reset_manager_base->ctrl); -#endif - /* - * infinite loop here as watchdog will trigger and reset - * the processor - */ - while (1) - ; -} diff --git a/arch/arm/mach-zynqmp/Kconfig b/arch/arm/mach-zynqmp/Kconfig index 9bb5a5c2020..6cf17eb94e1 100644 --- a/arch/arm/mach-zynqmp/Kconfig +++ b/arch/arm/mach-zynqmp/Kconfig @@ -65,6 +65,24 @@ config PMUFW_INIT_FILE Include external PMUFW (Platform Management Unit FirmWare) to a Xilinx bootable image (boot.bin). +config ZYNQMP_SPL_PM_CFG_OBJ_FILE + string "PMU firmware configuration object to load at runtime by SPL" + depends on SPL + help + Path to a binary PMU firmware configuration object to be linked + into U-Boot SPL and loaded at runtime into the PMU firmware. + + The ZynqMP Power Management Unit (PMU) needs a configuration + object for most SoC peripherals to work. To have it loaded by + U-Boot SPL set here the file name (absolute path or relative to + the top source tree) of your configuration, which must be a + binary blob. It will be linked in the SPL binary and loaded + into the PMU firmware by U-Boot SPL during board + initialization. + + Leave this option empty if your PMU firmware has a hard-coded + configuration object or you are loading it by any other means. + config ZYNQMP_USB bool "Configure ZynqMP USB" diff --git a/arch/arm/mach-zynqmp/Makefile b/arch/arm/mach-zynqmp/Makefile index 8a3b0747244..f3765e45b1b 100644 --- a/arch/arm/mach-zynqmp/Makefile +++ b/arch/arm/mach-zynqmp/Makefile @@ -8,3 +8,7 @@ obj-y += cpu.o obj-$(CONFIG_MP) += mp.o obj-$(CONFIG_SPL_BUILD) += spl.o handoff.o obj-$(CONFIG_ZYNQMP_PSU_INIT_ENABLED) += psu_spl_init.o + +ifneq ($(CONFIG_ZYNQMP_SPL_PM_CFG_OBJ_FILE),"") +obj-$(CONFIG_SPL_BUILD) += pmu_ipc.o +endif diff --git a/arch/arm/mach-zynqmp/include/mach/sys_proto.h b/arch/arm/mach-zynqmp/include/mach/sys_proto.h index 385c8825f2f..915badc6fbe 100644 --- a/arch/arm/mach-zynqmp/include/mach/sys_proto.h +++ b/arch/arm/mach-zynqmp/include/mach/sys_proto.h @@ -72,4 +72,6 @@ int chip_id(unsigned char id); void tcm_init(u8 mode); #endif +void zynqmp_pmufw_load_config_object(const void *cfg_obj, size_t size); + #endif /* _ASM_ARCH_SYS_PROTO_H */ diff --git a/arch/arm/mach-zynqmp/pmu_ipc.c b/arch/arm/mach-zynqmp/pmu_ipc.c new file mode 100644 index 00000000000..d8858ea3ff9 --- /dev/null +++ b/arch/arm/mach-zynqmp/pmu_ipc.c @@ -0,0 +1,112 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Inter-Processor Communication with the Platform Management Unit (PMU) + * firmware. + * + * (C) Copyright 2019 Luca Ceresoli + * Luca Ceresoli <luca@lucaceresoli.net> + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/sys_proto.h> + +/* IPI bitmasks, register base and register offsets */ +#define IPI_BIT_MASK_APU 0x00001 +#define IPI_BIT_MASK_PMU0 0x10000 +#define IPI_REG_BASE_APU 0xFF300000 +#define IPI_REG_BASE_PMU0 0xFF330000 +#define IPI_REG_OFFSET_TRIG 0x00 +#define IPI_REG_OFFSET_OBR 0x04 + +/* IPI mailbox buffer offsets */ +#define IPI_BUF_BASE_APU 0xFF990400 +#define IPI_BUF_OFFSET_TARGET_PMU 0x1C0 +#define IPI_BUF_OFFSET_REQ 0x00 +#define IPI_BUF_OFFSET_RESP 0x20 + +#define PMUFW_PAYLOAD_ARG_CNT 8 + +/* PMUFW commands */ +#define PMUFW_CMD_SET_CONFIGURATION 2 + +static void pmu_ipc_send_request(const u32 *req, size_t req_len) +{ + u32 *mbx = (u32 *)(IPI_BUF_BASE_APU + + IPI_BUF_OFFSET_TARGET_PMU + + IPI_BUF_OFFSET_REQ); + size_t i; + + for (i = 0; i < req_len; i++) + writel(req[i], &mbx[i]); +} + +static void pmu_ipc_read_response(unsigned int *value, size_t count) +{ + u32 *mbx = (u32 *)(IPI_BUF_BASE_APU + + IPI_BUF_OFFSET_TARGET_PMU + + IPI_BUF_OFFSET_RESP); + size_t i; + + for (i = 0; i < count; i++) + value[i] = readl(&mbx[i]); +} + +/** + * Send request to PMU and get the response. + * + * @req: Request buffer. Byte 0 is the API ID, other bytes are optional + * parameters. + * @req_len: Request length in number of 32-bit words. + * @res: Response buffer. Byte 0 is the error code, other bytes are + * optional parameters. Optional, if @res_maxlen==0 the parameters + * will not be read. + * @res_maxlen: Space allocated for the response in number of 32-bit words. + * + * @return Error code returned by the PMU (i.e. the first word of the response) + */ +static int pmu_ipc_request(const u32 *req, size_t req_len, + u32 *res, size_t res_maxlen) +{ + u32 status; + + if (req_len > PMUFW_PAYLOAD_ARG_CNT || + res_maxlen > PMUFW_PAYLOAD_ARG_CNT) + return -EINVAL; + + pmu_ipc_send_request(req, req_len); + + /* Raise Inter-Processor Interrupt to PMU and wait for response */ + writel(IPI_BIT_MASK_PMU0, IPI_REG_BASE_APU + IPI_REG_OFFSET_TRIG); + do { + status = readl(IPI_REG_BASE_APU + IPI_REG_OFFSET_OBR); + } while (status & IPI_BIT_MASK_PMU0); + + pmu_ipc_read_response(res, res_maxlen); + + return 0; +} + +/** + * Send a configuration object to the PMU firmware. + * + * @cfg_obj: Pointer to the configuration object + * @size: Size of @cfg_obj in bytes + */ +void zynqmp_pmufw_load_config_object(const void *cfg_obj, size_t size) +{ + const u32 request[] = { + PMUFW_CMD_SET_CONFIGURATION, + (u32)((u64)cfg_obj) + }; + u32 response; + int err; + + printf("Loading PMUFW cfg obj (%ld bytes)\n", size); + + err = pmu_ipc_request(request, ARRAY_SIZE(request), &response, 1); + if (err) + panic("Cannot load PMUFW configuration object (%d)\n", err); + if (response != 0) + panic("PMUFW returned 0x%08x status!\n", response); +} diff --git a/arch/sandbox/include/asm/spi.h b/arch/sandbox/include/asm/spi.h index 9985e3c4949..98e1826e2cb 100644 --- a/arch/sandbox/include/asm/spi.h +++ b/arch/sandbox/include/asm/spi.h @@ -1,5 +1,5 @@ /* - * Simulate a SPI port and clients (see README.sandbox for details) + * Simulate a SPI port and clients (see doc/arch/sandbox.rst for details) * * Copyright (c) 2011-2013 The Chromium OS Authors. * See file CREDITS for list of people who contributed to this |