diff options
Diffstat (limited to 'arch')
25 files changed, 213 insertions, 95 deletions
diff --git a/arch/arm/include/asm/arch-am33xx/cpu.h b/arch/arm/include/asm/arch-am33xx/cpu.h index 8cae291ea02..e8d7d549e8a 100644 --- a/arch/arm/include/asm/arch-am33xx/cpu.h +++ b/arch/arm/include/asm/arch-am33xx/cpu.h @@ -36,12 +36,6 @@ #define TCFG_RESET BIT(0) /* software reset */ #define TCFG_EMUFREE BIT(1) /* behaviour of tmr on debug */ #define TCFG_IDLEMOD_SHIFT (2) /* power management */ -/* device type */ -#define DEVICE_MASK (BIT(8) | BIT(9) | BIT(10)) -#define TST_DEVICE 0x0 -#define EMU_DEVICE 0x1 -#define HS_DEVICE 0x2 -#define GP_DEVICE 0x3 /* cpu-id for AM43XX AM33XX and TI81XX family */ #define AM437X 0xB98C diff --git a/arch/arm/include/asm/arch-am33xx/omap.h b/arch/arm/include/asm/arch-am33xx/omap.h index 0dafb9e3270..d2c5df84b54 100644 --- a/arch/arm/include/asm/arch-am33xx/omap.h +++ b/arch/arm/include/asm/arch-am33xx/omap.h @@ -41,6 +41,9 @@ struct omap_boot_parameters { unsigned char boot_device; unsigned char reset_reason; }; + +#define DEVICE_TYPE_SHIFT 0x8 +#define DEVICE_TYPE_MASK (0x7 << DEVICE_TYPE_SHIFT) #endif #endif diff --git a/arch/arm/include/asm/arch-omap3/omap.h b/arch/arm/include/asm/arch-omap3/omap.h index db763e49a32..8933f5489f8 100644 --- a/arch/arm/include/asm/arch-omap3/omap.h +++ b/arch/arm/include/asm/arch-omap3/omap.h @@ -91,6 +91,9 @@ struct s32ktimer { unsigned int s32k_cr; /* 0x10 */ }; +#define DEVICE_TYPE_SHIFT 0x8 +#define DEVICE_TYPE_MASK (0x7 << DEVICE_TYPE_SHIFT) + #endif /* __ASSEMBLY__ */ #ifndef __ASSEMBLY__ diff --git a/arch/arm/include/asm/arch-omap4/omap.h b/arch/arm/include/asm/arch-omap4/omap.h index b86a7768401..1a3ff7dc2fc 100644 --- a/arch/arm/include/asm/arch-omap4/omap.h +++ b/arch/arm/include/asm/arch-omap4/omap.h @@ -100,7 +100,6 @@ struct s32ktimer { #define DEVICE_TYPE_SHIFT (0x8) #define DEVICE_TYPE_MASK (0x7 << DEVICE_TYPE_SHIFT) -#define DEVICE_GP 0x3 #endif /* __ASSEMBLY__ */ diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h index 8f31da1a7b0..2f005dd3ad9 100644 --- a/arch/arm/include/asm/arch-omap5/omap.h +++ b/arch/arm/include/asm/arch-omap5/omap.h @@ -127,7 +127,6 @@ struct s32ktimer { #define DEVICE_TYPE_SHIFT 0x6 #define DEVICE_TYPE_MASK (0x7 << DEVICE_TYPE_SHIFT) -#define DEVICE_GP 0x3 /* Output impedance control */ #define ds_120_ohm 0x0 diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h index f98998343ea..7fb322aa7ac 100644 --- a/arch/arm/include/asm/omap_common.h +++ b/arch/arm/include/asm/omap_common.h @@ -484,6 +484,7 @@ struct omap_sys_ctrl_regs { u32 ctrl_core_sma_sw_1; }; +#if defined(CONFIG_OMAP44XX) || defined(CONFIG_OMAP54XX) struct dpll_params { u32 m; u32 n; @@ -516,6 +517,7 @@ struct dpll_regs { u32 cm_div_h23_dpll; u32 cm_div_h24_dpll; }; +#endif /* CONFIG_OMAP44XX || CONFIG_OMAP54XX */ struct dplls { const struct dpll_params *mpu; @@ -539,6 +541,7 @@ struct pmic_data { int (*pmic_write)(u8 sa, u8 reg_addr, u8 reg_data); }; +#if defined(CONFIG_OMAP44XX) || defined(CONFIG_OMAP54XX) enum { OPP_LOW, OPP_NOM, @@ -584,6 +587,7 @@ struct vcores_data { struct volts eve; struct volts iva; }; +#endif /* CONFIG_OMAP44XX || CONFIG_OMAP54XX */ extern struct prcm_regs const **prcm; extern struct prcm_regs const omap5_es1_prcm; @@ -595,6 +599,8 @@ extern struct dplls dra7xx_dplls; extern struct vcores_data const **omap_vcores; extern const u32 sys_clk_array[8]; extern struct omap_sys_ctrl_regs const **ctrl; +extern struct omap_sys_ctrl_regs const am33xx_ctrl; +extern struct omap_sys_ctrl_regs const omap3_ctrl; extern struct omap_sys_ctrl_regs const omap4_ctrl; extern struct omap_sys_ctrl_regs const omap5_ctrl; extern struct omap_sys_ctrl_regs const dra7xx_ctrl; @@ -611,6 +617,7 @@ const struct dpll_params *get_iva_dpll_params(struct dplls const *); const struct dpll_params *get_usb_dpll_params(struct dplls const *); const struct dpll_params *get_abe_dpll_params(struct dplls const *); +#if defined(CONFIG_OMAP44XX) || defined(CONFIG_OMAP54XX) void do_enable_clocks(u32 const *clk_domains, u32 const *clk_modules_hw_auto, u32 const *clk_modules_explicit_en, @@ -619,6 +626,7 @@ void do_enable_clocks(u32 const *clk_domains, void do_disable_clocks(u32 const *clk_domains, u32 const *clk_modules_disable, u8 wait_for_disable); +#endif /* CONFIG_OMAP44XX || CONFIG_OMAP54XX */ void setup_post_dividers(u32 const base, const struct dpll_params *params); @@ -630,7 +638,9 @@ void enable_basic_uboot_clocks(void); void enable_usb_clocks(int index); void disable_usb_clocks(int index); +#if defined(CONFIG_OMAP44XX) || defined(CONFIG_OMAP54XX) void scale_vcores(struct vcores_data const *); +#endif /* CONFIG_OMAP44XX || CONFIG_OMAP54XX */ int get_voltrail_opp(int rail_offset); u32 get_offset_code(u32 volt_offset, struct pmic_data *pmic); void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic); @@ -750,7 +760,6 @@ static inline u8 is_dra72x(void) * silicon device type * Moving to common from cpu.h, since it is shared by various omap devices */ -#define DEVICE_MASK (BIT(8) | BIT(9) | BIT(10)) #define TST_DEVICE 0x0 #define EMU_DEVICE 0x1 #define HS_DEVICE 0x2 diff --git a/arch/arm/include/asm/spl.h b/arch/arm/include/asm/spl.h index 5d7f7e6ec56..0e674704ab6 100644 --- a/arch/arm/include/asm/spl.h +++ b/arch/arm/include/asm/spl.h @@ -29,6 +29,7 @@ enum { BOOT_DEVICE_I2C, BOOT_DEVICE_BOARD, BOOT_DEVICE_DFU, + BOOT_DEVICE_XIP, BOOT_DEVICE_NONE }; #endif diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c index 704849bd0c7..b3e5d24a322 100644 --- a/arch/arm/lib/bootm.c +++ b/arch/arm/lib/bootm.c @@ -360,6 +360,7 @@ static void boot_jump_linux(bootm_headers_t *images, int flag) #ifdef CONFIG_CPU_V7M ulong addr = (ulong)kernel_entry | 1; kernel_entry = (void *)addr; + dcache_disable(); #endif s = getenv("machid"); if (s) { diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index d161b519464..683cdb92963 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -2,57 +2,7 @@ if ARCH_OMAP2PLUS choice prompt "OMAP2+ platform select" - default TARGET_BRXRE1 - -config TARGET_BRXRE1 - bool "Support BRXRE1" - select BOARD_LATE_INIT - -config TARGET_BRPPT1 - bool "Support BRPPT1" - select BOARD_LATE_INIT - -config TARGET_DRACO - bool "Support draco" - select BOARD_LATE_INIT - select DM - select DM_SERIAL - select DM_GPIO - -config TARGET_THUBAN - bool "Support thuban" - select BOARD_LATE_INIT - select DM - select DM_SERIAL - select DM_GPIO - -config TARGET_RASTABAN - bool "Support rastaban" - select BOARD_LATE_INIT - select DM - select DM_SERIAL - select DM_GPIO - -config TARGET_ETAMIN - bool "Support etamin" - select BOARD_LATE_INIT - select DM - select DM_SERIAL - select DM_GPIO - -config TARGET_PXM2 - bool "Support pxm2" - select BOARD_LATE_INIT - select DM - select DM_SERIAL - select DM_GPIO - -config TARGET_RUT - bool "Support rut" - select BOARD_LATE_INIT - select DM - select DM_SERIAL - select DM_GPIO + default OMAP34XX config OMAP34XX bool "OMAP34XX SoC" @@ -151,9 +101,6 @@ config AM33XX protocols, optional 3D graphics and an optional customer programmable secure boot. -config TARGET_CM_T43 - bool "Support cm_t43" - endchoice config SYS_MPUCLK diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index aa3986dddb1..d43085ca98b 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -20,6 +20,7 @@ endif endif obj-y += utils.o +obj-y += sysinfo-common.o ifneq ($(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),) obj-y += hwinit-common.o obj-y += clocks-common.o diff --git a/arch/arm/mach-omap2/am33xx/Kconfig b/arch/arm/mach-omap2/am33xx/Kconfig index 36ec1341409..d8abba992ac 100644 --- a/arch/arm/mach-omap2/am33xx/Kconfig +++ b/arch/arm/mach-omap2/am33xx/Kconfig @@ -26,7 +26,6 @@ config AM33XX_CHILISOM choice prompt "AM33xx board select" - optional config TARGET_AM335X_EVM bool "Support am335x_evm" @@ -104,6 +103,14 @@ config TARGET_BAV335X For more information, visit: http://birdland.com/oem +config TARGET_BRXRE1 + bool "Support BRXRE1" + select BOARD_LATE_INIT + +config TARGET_BRPPT1 + bool "Support BRPPT1" + select BOARD_LATE_INIT + config TARGET_CHILIBOARD bool "Grinn chiliBoard" select AM33XX_CHILISOM @@ -117,6 +124,20 @@ config TARGET_CM_T335 select DM_SERIAL select DM_GPIO +config TARGET_DRACO + bool "Support draco" + select BOARD_LATE_INIT + select DM + select DM_SERIAL + select DM_GPIO + +config TARGET_ETAMIN + bool "Support etamin" + select BOARD_LATE_INIT + select DM + select DM_SERIAL + select DM_GPIO + config TARGET_PCM051 bool "Support pcm051" select DM @@ -135,12 +156,43 @@ config TARGET_PEPPER select DM_SERIAL select DM_GPIO +config TARGET_PXM2 + bool "Support pxm2" + select BOARD_LATE_INIT + select DM + select DM_SERIAL + select DM_GPIO + +config TARGET_RASTABAN + bool "Support rastaban" + select BOARD_LATE_INIT + select DM + select DM_SERIAL + select DM_GPIO + +config TARGET_RUT + bool "Support rut" + select BOARD_LATE_INIT + select DM + select DM_SERIAL + select DM_GPIO + +config TARGET_THUBAN + bool "Support thuban" + select BOARD_LATE_INIT + select DM + select DM_SERIAL + select DM_GPIO + endchoice endif if AM43XX +choice + prompt "AM43xx board select" + config TARGET_AM43XX_EVM bool "Support am43xx_evm" select BOARD_LATE_INIT @@ -171,6 +223,12 @@ config TARGET_AM43XX_EVM evaluation module system that enables developers to write software and develop hardware around an AM43xx processor subsystem. + +config TARGET_CM_T43 + bool "Support cm_t43" + +endchoice + endif if AM43XX || AM33XX diff --git a/arch/arm/mach-omap2/am33xx/Makefile b/arch/arm/mach-omap2/am33xx/Makefile index 1e4c04e7a65..b2f8158e733 100644 --- a/arch/arm/mach-omap2/am33xx/Makefile +++ b/arch/arm/mach-omap2/am33xx/Makefile @@ -21,6 +21,8 @@ endif obj-$(CONFIG_TI816X) += ti816x_emif4.o obj-y += board.o obj-y += mux.o +obj-y += prcm-regs.o +obj-y += hw_data.o obj-$(CONFIG_CLOCK_SYNTHESIZER) += clk_synthesizer.o diff --git a/arch/arm/mach-omap2/am33xx/board.c b/arch/arm/mach-omap2/am33xx/board.c index faf7d07a033..5f1bf9ce7c0 100644 --- a/arch/arm/mach-omap2/am33xx/board.c +++ b/arch/arm/mach-omap2/am33xx/board.c @@ -26,6 +26,7 @@ #include <asm/io.h> #include <asm/emif.h> #include <asm/gpio.h> +#include <asm/omap_common.h> #include <i2c.h> #include <miiphy.h> #include <cpsw.h> @@ -347,6 +348,7 @@ void early_system_init(void) #ifdef CONFIG_SPL_BUILD void board_init_f(ulong dummy) { + hw_data_init(); early_system_init(); board_early_init_f(); sdram_init(); @@ -361,6 +363,7 @@ void board_init_f(ulong dummy) int arch_cpu_init_dm(void) { + hw_data_init(); #ifndef CONFIG_SKIP_LOWLEVEL_INIT early_system_init(); #endif diff --git a/arch/arm/mach-omap2/am33xx/hw_data.c b/arch/arm/mach-omap2/am33xx/hw_data.c new file mode 100644 index 00000000000..63e55cff77d --- /dev/null +++ b/arch/arm/mach-omap2/am33xx/hw_data.c @@ -0,0 +1,19 @@ +/* + * HW data initialization for AM33xx. + * + * (C) Copyright 2017 Linaro Ltd. + * Sam Protsenko <semen.protsenko@linaro.org> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <asm/arch/omap.h> +#include <asm/omap_common.h> + +struct omap_sys_ctrl_regs const **ctrl = + (struct omap_sys_ctrl_regs const **)OMAP_SRAM_SCRATCH_SYS_CTRL; + +void hw_data_init(void) +{ + *ctrl = &am33xx_ctrl; +} diff --git a/arch/arm/mach-omap2/am33xx/prcm-regs.c b/arch/arm/mach-omap2/am33xx/prcm-regs.c new file mode 100644 index 00000000000..c9a3af65849 --- /dev/null +++ b/arch/arm/mach-omap2/am33xx/prcm-regs.c @@ -0,0 +1,15 @@ +/* + * HW regs data for AM33xx. + * + * (C) Copyright 2017 Linaro Ltd. + * Sam Protsenko <semen.protsenko@linaro.org> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <asm/arch/hardware.h> +#include <asm/omap_common.h> + +struct omap_sys_ctrl_regs const am33xx_ctrl = { + .control_status = CTRL_BASE + 0x40, +}; diff --git a/arch/arm/mach-omap2/am33xx/sys_info.c b/arch/arm/mach-omap2/am33xx/sys_info.c index 564bae67936..ea434aaf33f 100644 --- a/arch/arm/mach-omap2/am33xx/sys_info.c +++ b/arch/arm/mach-omap2/am33xx/sys_info.c @@ -51,16 +51,6 @@ u32 get_cpu_type(void) } /** - * get_device_type(): tell if GP/HS/EMU/TST - */ -u32 get_device_type(void) -{ - int mode; - mode = readl(&cstat->statusreg) & (DEVICE_MASK); - return mode >>= 8; -} - -/** * get_sysboot_value(void) - return SYS_BOOT[4:0] */ u32 get_sysboot_value(void) diff --git a/arch/arm/mach-omap2/hwinit-common.c b/arch/arm/mach-omap2/hwinit-common.c index c090442598e..7f6db3cf371 100644 --- a/arch/arm/mach-omap2/hwinit-common.c +++ b/arch/arm/mach-omap2/hwinit-common.c @@ -278,15 +278,6 @@ int checkboard(void) return 0; } -/* - * get_device_type(): tell if GP/HS/EMU/TST - */ -u32 get_device_type(void) -{ - return (readl((*ctrl)->control_status) & - (DEVICE_TYPE_MASK)) >> DEVICE_TYPE_SHIFT; -} - #if defined(CONFIG_DISPLAY_CPUINFO) /* * Print CPU information diff --git a/arch/arm/mach-omap2/omap3/Makefile b/arch/arm/mach-omap2/omap3/Makefile index 06cc9f26587..61a76b6f66b 100644 --- a/arch/arm/mach-omap2/omap3/Makefile +++ b/arch/arm/mach-omap2/omap3/Makefile @@ -14,6 +14,8 @@ obj-y += board.o obj-y += boot.o obj-y += clock.o obj-y += sys_info.o +obj-y += prcm-regs.o +obj-y += hw_data.o ifdef CONFIG_SPL_BUILD obj-$(CONFIG_SPL_OMAP3_ID_NAND) += spl_id_nand.o endif diff --git a/arch/arm/mach-omap2/omap3/board.c b/arch/arm/mach-omap2/omap3/board.c index 01df579df28..cd8e3022729 100644 --- a/arch/arm/mach-omap2/omap3/board.c +++ b/arch/arm/mach-omap2/omap3/board.c @@ -173,6 +173,11 @@ void try_unlock_memory(void) return; } +void early_system_init(void) +{ + hw_data_init(); +} + /****************************************************************************** * Routine: s_init * Description: Does early system init of muxing and clocks. @@ -181,6 +186,7 @@ void try_unlock_memory(void) void s_init(void) { watchdog_init(); + early_system_init(); try_unlock_memory(); @@ -204,6 +210,7 @@ void s_init(void) #ifdef CONFIG_SPL_BUILD void board_init_f(ulong dummy) { + early_system_init(); mem_init(); } #endif diff --git a/arch/arm/mach-omap2/omap3/hw_data.c b/arch/arm/mach-omap2/omap3/hw_data.c new file mode 100644 index 00000000000..53b220aec3c --- /dev/null +++ b/arch/arm/mach-omap2/omap3/hw_data.c @@ -0,0 +1,19 @@ +/* + * HW data initialization for OMAP3. + * + * (C) Copyright 2017 Linaro Ltd. + * Sam Protsenko <semen.protsenko@linaro.org> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <asm/arch/omap.h> +#include <asm/omap_common.h> + +struct omap_sys_ctrl_regs const **ctrl = + (struct omap_sys_ctrl_regs const **)OMAP_SRAM_SCRATCH_SYS_CTRL; + +void hw_data_init(void) +{ + *ctrl = &omap3_ctrl; +} diff --git a/arch/arm/mach-omap2/omap3/prcm-regs.c b/arch/arm/mach-omap2/omap3/prcm-regs.c new file mode 100644 index 00000000000..ca29ce9bda8 --- /dev/null +++ b/arch/arm/mach-omap2/omap3/prcm-regs.c @@ -0,0 +1,15 @@ +/* + * HW regs data for OMAP3. + * + * (C) Copyright 2017 Linaro Ltd. + * Sam Protsenko <semen.protsenko@linaro.org> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <asm/arch/omap.h> +#include <asm/omap_common.h> + +struct omap_sys_ctrl_regs const omap3_ctrl = { + .control_status = OMAP34XX_CTRL_BASE + 0x2F0, +}; diff --git a/arch/arm/mach-omap2/omap3/sys_info.c b/arch/arm/mach-omap2/omap3/sys_info.c index 7e6c2633f9b..155f5b245d7 100644 --- a/arch/arm/mach-omap2/omap3/sys_info.c +++ b/arch/arm/mach-omap2/omap3/sys_info.c @@ -17,6 +17,7 @@ #include <asm/arch/mem.h> /* get mem tables */ #include <asm/arch/sys_proto.h> #include <asm/bootm.h> +#include <asm/omap_common.h> #include <i2c.h> #include <linux/compiler.h> @@ -236,14 +237,6 @@ u32 get_boot_type(void) return (readl(&ctrl_base->status) & SYSBOOT_MASK); } -/************************************************************* - * get_device_type(): tell if GP/HS/EMU/TST - *************************************************************/ -u32 get_device_type(void) -{ - return ((readl(&ctrl_base->status) & (DEVICE_MASK)) >> 8); -} - #ifdef CONFIG_DISPLAY_CPUINFO /** * Print CPU information diff --git a/arch/arm/mach-omap2/sysinfo-common.c b/arch/arm/mach-omap2/sysinfo-common.c new file mode 100644 index 00000000000..1dc7051ab3c --- /dev/null +++ b/arch/arm/mach-omap2/sysinfo-common.c @@ -0,0 +1,21 @@ +/* + * System information routines for all OMAP based boards. + * + * (C) Copyright 2017 Linaro Ltd. + * Sam Protsenko <semen.protsenko@linaro.org> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <asm/arch/omap.h> +#include <asm/io.h> +#include <asm/omap_common.h> + +/** + * Tell if device is GP/HS/EMU/TST. + */ +u32 get_device_type(void) +{ + return (readl((*ctrl)->control_status) & DEVICE_TYPE_MASK) >> + DEVICE_TYPE_SHIFT; +} diff --git a/arch/arm/mach-rmobile/include/mach/sh_sdhi.h b/arch/arm/mach-rmobile/include/mach/sh_sdhi.h index 057bf3f8bbf..1fb0648b126 100644 --- a/arch/arm/mach-rmobile/include/mach/sh_sdhi.h +++ b/arch/arm/mach-rmobile/include/mach/sh_sdhi.h @@ -1,9 +1,9 @@ /* * drivers/mmc/sh-sdhi.h * - * SD/MMC driver for Reneas rmobile ARM SoCs + * SD/MMC driver for Renesas rmobile ARM SoCs * - * Copyright (C) 2013-2014 Renesas Electronics Corporation + * Copyright (C) 2013-2017 Renesas Electronics Corporation * Copyright (C) 2008-2009 Renesas Solutions Corp. * * SPDX-License-Identifier: GPL-2.0 @@ -50,8 +50,10 @@ /* SDHI CMD VALUE */ #define CMD_MASK 0x0000ffff #define SDHI_APP 0x0040 +#define SDHI_MMC_SEND_OP_COND 0x0701 #define SDHI_SD_APP_SEND_SCR 0x0073 #define SDHI_SD_SWITCH 0x1C06 +#define SDHI_MMC_SEND_EXT_CSD 0x1C08 /* SDHI_PORTSEL */ #define USE_1PORT (1 << 8) /* 1 port */ @@ -120,7 +122,10 @@ #define CLK_ENABLE (1 << 8) /* SDHI_OPTION */ -#define OPT_BUS_WIDTH_1 (1 << 15) /* bus width = 1 bit */ +#define OPT_BUS_WIDTH_M (5 << 13) /* 101b (15-13bit) */ +#define OPT_BUS_WIDTH_1 (4 << 13) /* bus width = 1 bit */ +#define OPT_BUS_WIDTH_4 (0 << 13) /* bus width = 4 bit */ +#define OPT_BUS_WIDTH_8 (1 << 13) /* bus width = 8 bit */ /* SDHI_ERR_STS1 */ #define ERR_STS1_CRC_ERROR ((1 << 11) | (1 << 10) | (1 << 9) | \ @@ -162,7 +167,9 @@ #define CLKDEV_INIT 400000 /* 100 - 400 KHz */ /* For quirk */ -#define SH_SDHI_QUIRK_16BIT_BUF (1) +#define SH_SDHI_QUIRK_16BIT_BUF BIT(0) +#define SH_SDHI_QUIRK_64BIT_BUF BIT(1) + int sh_sdhi_init(unsigned long addr, int ch, unsigned long quirks); #endif /* _SH_SDHI_H */ diff --git a/arch/arm/mach-stm32/Kconfig b/arch/arm/mach-stm32/Kconfig index ec6b3ff2dff..8f4371429f6 100644 --- a/arch/arm/mach-stm32/Kconfig +++ b/arch/arm/mach-stm32/Kconfig @@ -8,6 +8,25 @@ config STM32F1 config STM32F7 bool "stm32f7 family" + select SUPPORT_SPL + select SPL + select SPL_CLK + select SPL_DM + select SPL_DM_SEQ_ALIAS + select SPL_DRIVERS_MISC_SUPPORT + select SPL_GPIO_SUPPORT + select SPL_LIBCOMMON_SUPPORT + select SPL_LIBGENERIC_SUPPORT + select SPL_MTD_SUPPORT + select SPL_OF_CONTROL + select SPL_OF_LIBFDT + select SPL_OF_TRANSLATE + select SPL_OS_BOOT + select SPL_PINCTRL + select SPL_RAM + select SPL_SERIAL_SUPPORT + select SPL_SYS_MALLOC_SIMPLE + select SPL_XIP_SUPPORT source "arch/arm/mach-stm32/stm32f4/Kconfig" source "arch/arm/mach-stm32/stm32f1/Kconfig" |