diff options
Diffstat (limited to 'board/MAI/AmigaOneG3SE')
33 files changed, 8193 insertions, 0 deletions
diff --git a/board/MAI/AmigaOneG3SE/AmigaOneG3SE.c b/board/MAI/AmigaOneG3SE/AmigaOneG3SE.c new file mode 100644 index 00000000000..0cf5388a433 --- /dev/null +++ b/board/MAI/AmigaOneG3SE/AmigaOneG3SE.c @@ -0,0 +1,116 @@ +/* + * (C) Copyright 2002 + * Hyperion Entertainment, ThomasF@hyperion-entertainment.com + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <pci.h> +#include "articiaS.h" +#include "memio.h" +#include "via686.h" + +__asm(" .globl send_kb \n + send_kb: \n + lis r9, 0xfe00 \n + \n + li r4, 0x10 # retries \n + mtctr r4 \n + \n + idle: \n + lbz r4, 0x64(r9) \n + andi. r4, r4, 0x02 \n + bne idle \n + \n + ready: \n + stb r3, 0x60(r9) \n + \n + check: \n + lbz r4, 0x64(r9) \n + andi. r4, r4, 0x01 \n + beq check \n + \n + lbz r4, 0x60(r9) \n + cmpwi r4, 0xfa \n + beq done \n + \n + bdnz idle \n + \n + li r3, 0 \n + blr \n + \n + done: \n + li r3, 1 \n + blr \n + \n + .globl test_kb \n + test_kb: \n + mflr r10 \n + li r3, 0xed \n + bl send_kb \n + li r3, 0x01 \n + bl send_kb \n + mtlr r10 \n + blr \n +"); + + +int checkboard (void) +{ + printf ("AmigaOneG3SE\n"); + + return 1; +} + +long initdram (int board_type) +{ + return articiaS_ram_init (); +} + + + +void after_reloc (ulong dest_addr) +{ + DECLARE_GLOBAL_DATA_PTR; + + board_init_r (gd, dest_addr); +} + + +int misc_init_r (void) +{ + extern pci_dev_t video_dev; + extern void drv_video_init (void); + + if (video_dev != ~0) + drv_video_init (); + + return (0); +} + + +void pci_init (void) +{ +#ifndef CONFIG_RAMBOOT + articiaS_pci_init (); +#endif +} diff --git a/board/MAI/AmigaOneG3SE/Makefile b/board/MAI/AmigaOneG3SE/Makefile new file mode 100644 index 00000000000..727174640a7 --- /dev/null +++ b/board/MAI/AmigaOneG3SE/Makefile @@ -0,0 +1,53 @@ +# +# (C) Copyright 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +COBJS = $(BOARD).o articiaS.o flash.o serial.o smbus.o articiaS_pci.o \ + via686.o i8259.o ../bios_emulator/x86interface.o \ + ../bios_emulator/bios.o ../bios_emulator/glue.o \ + interrupts.o ps2kbd.o video.o usb_uhci.o enet.o \ + ../menu/cmd_menu.o cmd_boota.o nvram.o + +AOBJS = board_asm_init.o memio.o + +OBJS = $(COBJS) $(AOBJS) + +## FIXME !!! +# EMUOBJS = ../bios_emulator/scitech/src/x86emu/*.o + + +$(LIB): .depend $(OBJS) $(EMUOBJS) + -rm $(LIB) + $(AR) crv $@ $(OBJS) $(EMUOBJS) + +######################################################################### + +.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c) + $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@ + +sinclude .depend + +######################################################################### diff --git a/board/MAI/AmigaOneG3SE/articiaS.c b/board/MAI/AmigaOneG3SE/articiaS.c new file mode 100644 index 00000000000..af85444f485 --- /dev/null +++ b/board/MAI/AmigaOneG3SE/articiaS.c @@ -0,0 +1,704 @@ +/* + * (C) Copyright 2002 + * Hyperion Entertainment, ThomasF@hyperion-entertainment.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <pci.h> +#include <asm/processor.h> +#include "memio.h" +#include "articiaS.h" +#include "smbus.h" +#include "via686.h" + +#undef DEBUG + +struct dimm_bank { + uint8 used; /* Bank is populated */ + uint32 rows; /* Number of row addresses */ + uint32 columns; /* Number of column addresses */ + uint8 registered; /* SIMM is registered */ + uint8 ecc; /* SIMM has ecc */ + uint8 burst_len; /* Supported burst lengths */ + uint32 cas_lat; /* Supported CAS latencies */ + uint32 cas_used; /* CAS to use (not set by user) */ + uint32 trcd; /* RAS to CAS latency */ + uint32 trp; /* Precharge latency */ + uint32 tclk_hi; /* SDRAM cycle time (highest CAS latency) */ + uint32 tclk_2hi; /* SDRAM second highest CAS latency */ + uint32 size; /* Size of bank in bytes */ + uint8 auto_refresh; /* Module supports auto refresh */ + uint32 refresh_time; /* Refresh time (in ns) */ +}; + + +/* +** Based in part on the evb64260 code +*/ + +/* + * translate ns.ns/10 coding of SPD timing values + * into 10 ps unit values + */ +static inline unsigned short NS10to10PS (unsigned char spd_byte) +{ + unsigned short ns, ns10; + + /* isolate upper nibble */ + ns = (spd_byte >> 4) & 0x0F; + /* isolate lower nibble */ + ns10 = (spd_byte & 0x0F); + + return (ns * 100 + ns10 * 10); +} + +/* + * translate ns coding of SPD timing values + * into 10 ps unit values + */ +static inline unsigned short NSto10PS (unsigned char spd_byte) +{ + return (spd_byte * 100); +} + + +long detect_sdram (uint8 * rom, int dimmNum, struct dimm_bank *banks) +{ + int dimm_address = (dimmNum == 0) ? SM_DIMM0_ADDR : SM_DIMM1_ADDR; + uint32 busclock = get_bus_freq (0); + uint32 memclock = busclock; + uint32 tmemclock = 1000000000 / (memclock / 100); + uint32 datawidth; + + if (sm_get_data (rom, dimm_address) == 0) { + /* Nothing in slot, make both banks empty */ + debug ("Slot %d: vacant\n", dimmNum); + banks[0].used = 0; + banks[1].used = 0; + return 0; + } + + if (rom[2] != 0x04) { + debug ("Slot %d: No SDRAM\n", dimmNum); + banks[0].used = 0; + banks[1].used = 0; + return 0; + } + + /* Determine number of banks/rows */ + if (rom[5] == 1) { + banks[0].used = 1; + banks[1].used = 0; + } else { + banks[0].used = 1; + banks[1].used = 1; + } + + /* Determine number of row addresses */ + if (rom[3] & 0xf0) { + /* Different banks sizes */ + banks[0].rows = rom[3] & 0x0f; + banks[1].rows = (rom[3] & 0xf0) >> 4; + } else { + /* Equal sized banks */ + banks[0].rows = rom[3] & 0x0f; + banks[1].rows = banks[0].rows; + } + + /* Determine number of column addresses */ + if (rom[4] & 0xf0) { + /* Different bank sizes */ + banks[0].columns = rom[4] & 0x0f; + banks[1].columns = (rom[4] & 0xf0) >> 4; + } else { + banks[0].columns = rom[4] & 0x0f; + banks[1].columns = banks[0].columns; + } + + /* Check Jedec revision, and modify row/column accordingly */ + if (rom[62] > 0x10) { + if (banks[0].rows <= 3) + banks[0].rows += 15; + if (banks[1].rows <= 3) + banks[1].rows += 15; + if (banks[0].columns <= 3) + banks[0].columns += 15; + if (banks[0].columns <= 3) + banks[0].columns += 15; + } + + /* Check registered/unregisterd */ + if (rom[21] & 0x12) { + banks[0].registered = 1; + banks[1].registered = 1; + } else { + banks[0].registered = 0; + banks[1].registered = 0; + } + +#ifdef CONFIG_ECC + /* Check parity/ECC */ + banks[0].ecc = (rom[11] == 0x02); + banks[1].ecc = (rom[11] == 0x02); +#endif + + /* Find burst lengths supported */ + banks[0].burst_len = rom[16] & 0x8f; + banks[1].burst_len = rom[16] & 0x8f; + + /* Find possible cas latencies */ + banks[0].cas_lat = rom[18] & 0x7F; + banks[1].cas_lat = rom[18] & 0x7F; + + /* RAS/CAS latency */ + banks[0].trcd = (NSto10PS (rom[29]) + (tmemclock - 1)) / tmemclock; + banks[1].trcd = (NSto10PS (rom[29]) + (tmemclock - 1)) / tmemclock; + + /* Precharge latency */ + banks[0].trp = (NSto10PS (rom[27]) + (tmemclock - 1)) / tmemclock; + banks[1].trp = (NSto10PS (rom[27]) + (tmemclock - 1)) / tmemclock; + + /* highest CAS latency */ + banks[0].tclk_hi = NS10to10PS (rom[9]); + banks[1].tclk_hi = NS10to10PS (rom[9]); + + /* second highest CAS latency */ + banks[0].tclk_2hi = NS10to10PS (rom[23]); + banks[1].tclk_2hi = NS10to10PS (rom[23]); + + /* bank sizes */ + datawidth = rom[13] & 0x7f; + banks[0].size = + (1L << (banks[0].rows + banks[0].columns)) * + /* FIXME datawidth */ 8 * rom[17]; + if (rom[13] & 0x80) + banks[1].size = 2 * banks[0].size; + else + banks[1].size = (1L << (banks[1].rows + banks[1].columns)) * + /* FIXME datawidth */ 8 * rom[17]; + + /* Refresh */ + if (rom[12] & 0x80) { + banks[0].auto_refresh = 1; + banks[1].auto_refresh = 1; + } else { + banks[0].auto_refresh = 0; + banks[1].auto_refresh = 0; + } + + switch (rom[12] & 0x7f) { + case 0: + banks[0].refresh_time = (1562500 + (tmemclock - 1)) / tmemclock; + banks[1].refresh_time = (1562500 + (tmemclock - 1)) / tmemclock; + break; + case 1: + banks[0].refresh_time = (390600 + (tmemclock - 1)) / tmemclock; + banks[1].refresh_time = (390600 + (tmemclock - 1)) / tmemclock; + break; + case 2: + banks[0].refresh_time = (781200 + (tmemclock - 1)) / tmemclock; + banks[1].refresh_time = (781200 + (tmemclock - 1)) / tmemclock; + break; + case 3: + banks[0].refresh_time = (3125000 + (tmemclock - 1)) / tmemclock; + banks[1].refresh_time = (3125000 + (tmemclock - 1)) / tmemclock; + break; + case 4: + banks[0].refresh_time = (6250000 + (tmemclock - 1)) / tmemclock; + banks[1].refresh_time = (6250000 + (tmemclock - 1)) / tmemclock; + break; + case 5: + banks[0].refresh_time = (12500000 + (tmemclock - 1)) / tmemclock; + banks[1].refresh_time = (12500000 + (tmemclock - 1)) / tmemclock; + break; + default: + banks[0].refresh_time = 0x100; /* Default of Articia S */ + banks[1].refresh_time = 0x100; + break; + } + +#ifdef DEBUG + printf ("\nInformation for SIMM bank %ld:\n", dimmNum); + printf ("Number of banks: %ld\n", banks[0].used + banks[1].used); + printf ("Number of row addresses: %ld\n", banks[0].rows); + printf ("Number of coumns addresses: %ld\n", banks[0].columns); + printf ("SIMM is %sregistered\n", + banks[0].registered == 0 ? "not " : ""); +#ifdef CONFIG_ECC + printf ("SIMM %s ECC\n", + banks[0].ecc == 1 ? "supports" : "doesn't support"); +#endif + printf ("Supported burst lenghts: %s %s %s %s %s\n", + banks[0].burst_len & 0x08 ? "8" : " ", + banks[0].burst_len & 0x04 ? "4" : " ", + banks[0].burst_len & 0x02 ? "2" : " ", + banks[0].burst_len & 0x01 ? "1" : " ", + banks[0].burst_len & 0x80 ? "PAGE" : " "); + printf ("Supported CAS latencies: %s %s %s\n", + banks[0].cas_lat & 0x04 ? "CAS 3" : " ", + banks[0].cas_lat & 0x02 ? "CAS 2" : " ", + banks[0].cas_lat & 0x01 ? "CAS 1" : " "); + printf ("RAS to CAS latency: %ld\n", banks[0].trcd); + printf ("Precharge latency: %ld\n", banks[0].trp); + printf ("SDRAM highest CAS latency: %ld\n", banks[0].tclk_hi); + printf ("SDRAM 2nd highest CAS latency: %ld\n", banks[0].tclk_2hi); + printf ("SDRAM data width: %ld\n", datawidth); + printf ("Auto Refresh %ssupported\n", + banks[0].auto_refresh ? "" : "not "); + printf ("Refresh time: %ld clocks\n", banks[0].refresh_time); + if (banks[0].used) + printf ("Bank 0 size: %ld MB\n", banks[0].size / 1024 / 1024); + if (banks[1].used) + printf ("Bank 1 size: %ld MB\n", banks[1].size / 1024 / 1024); + + printf ("\n"); +#endif + + sm_term (); + return 1; +} + +void select_cas (struct dimm_bank *banks, uint8 fast) +{ + if (!banks[0].used) { + banks[0].cas_used = 0; + banks[0].cas_used = 0; + return; + } + + if (fast) { + /* Search for fast CAS */ + uint32 i; + uint32 c = 0x01; + + for (i = 1; i < 5; i++) { + if (banks[0].cas_lat & c) { + banks[0].cas_used = i; + banks[1].cas_used = i; + debug ("Using CAS %d (fast)\n", i); + return; + } + c <<= 1; + } + + /* Default to CAS 3 */ + banks[0].cas_used = 3; + banks[1].cas_used = 3; + debug ("Using CAS 3 (fast)\n"); + + return; + } else { + /* Search for slow cas */ + uint32 i; + uint32 c = 0x08; + + for (i = 4; i > 1; i--) { + if (banks[0].cas_lat & c) { + banks[0].cas_used = i; + banks[1].cas_used = i; + debug ("Using CAS %d (slow)\n", i); + return; + } + c >>= 1; + } + + /* Default to CAS 3 */ + banks[0].cas_used = 3; + banks[1].cas_used = 3; + debug ("Using CAS 3 (slow)\n"); + + return; + } + + banks[0].cas_used = 3; + banks[1].cas_used = 3; + debug ("Using CAS 3\n"); + + return; +} + +uint32 get_reg_setting (uint32 banks, uint32 rows, uint32 columns, uint32 size) +{ + uint32 i; + + struct RowColumnSize { + uint32 banks; + uint32 rows; + uint32 columns; + uint32 size; + uint32 register_value; + }; + + struct RowColumnSize rcs_map[] = { + /* Sbk Radr Cadr MB Value */ + {1, 11, 8, 8, 0x00840f00}, + {1, 11, 9, 16, 0x00925f00}, + {1, 11, 10, 32, 0x00a64f00}, + {2, 12, 8, 32, 0x00c55f00}, + {2, 12, 9, 64, 0x00d66f00}, + {2, 12, 10, 128, 0x00e77f00}, + {2, 12, 11, 256, 0x00ff8f00}, + {2, 13, 11, 512, 0x00ff9f00}, + {0, 0, 0, 0, 0x00000000} + }; + + + i = 0; + + while (rcs_map[i].banks != 0) { + if (rows == rcs_map[i].rows + && columns == rcs_map[i].columns + && (size / 1024 / 1024) == rcs_map[i].size) + return rcs_map[i].register_value; + + i++; + } + + return 0; +} + +uint32 burst_to_len (uint32 support) +{ + if (support & 0x80) + return 0x7; + else if (support & 0x8) + return 0x3; + else if (support & 0x4) + return 0x2; + else if (support & 0x2) + return 0x1; + else if (support & 0x1) + return 0x0; + + return 0; +} + +long articiaS_ram_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + register uint32 i; + register uint32 value1; + register uint32 value2; + uint8 rom[128]; + uint32 burst_len; + uint32 burst_support; + uint32 total_ram = 0; + + struct dimm_bank banks[4]; /* FIXME: Move to initram */ + uint32 busclock = get_bus_freq (0); + uint32 memclock = busclock; + uint32 reg32; + uint32 refresh_clocks; + uint8 auto_refresh; + + memset (banks, 0, sizeof (struct dimm_bank) * 4); + + detect_sdram (rom, 0, &banks[0]); + detect_sdram (rom, 1, &banks[2]); + + for (i = 0; i < 4; i++) { + total_ram = total_ram + (banks[i].used * banks[i].size); + } + + pci_write_cfg_long (0, 0, GLOBALINFO0, 0x117430c0); + pci_write_cfg_long (0, 0, HBUSACR0, 0x1f0100b0); + pci_write_cfg_long (0, 0, SRAM_CR, 0x00f12000); /* Note: Might also try 0x00f10000 (original: 0x00f12000) */ + pci_write_cfg_byte (0, 0, DRAM_RAS_CTL0, 0x3f); + pci_write_cfg_byte (0, 0, DRAM_RAS_CTL1, 0x00); /* was: 0x04); */ + pci_write_cfg_word (0, 0, DRAM_ECC0, 0x2020); /* was: 0x2400); No ECC yet */ + + /* FIXME: Move this stuff to seperate function, like setup_dimm_bank */ + if (banks[0].used) { + value1 = get_reg_setting (banks[0].used + banks[1].used, + banks[0].rows, banks[0].columns, + banks[0].size); + } else { + value1 = 0; + } + + if (banks[1].used) { + value2 = get_reg_setting (banks[0].used + banks[1].used, + banks[1].rows, banks[1].columns, + banks[1].size); + } else { + value2 = 0; + } + + pci_write_cfg_long (0, 0, DIMM0_B0_SCR0, value1); + pci_write_cfg_long (0, 0, DIMM0_B1_SCR0, value2); + + debug ("DIMM0_B0_SCR0 = 0x%08x\n", value1); + debug ("DIMM0_B1_SCR0 = 0x%08x\n", value2); + + if (banks[2].used) { + value1 = get_reg_setting (banks[2].used + banks[3].used, + banks[2].rows, banks[2].columns, + banks[2].size); + } else { + value1 = 0; + } + + if (banks[3].used) { + value2 = get_reg_setting (banks[2].used + banks[3].used, + banks[3].rows, banks[3].columns, + banks[3].size); + } else { + value2 = 0; + } + + pci_write_cfg_long (0, 0, DIMM1_B2_SCR0, value1); + pci_write_cfg_long (0, 0, DIMM1_B3_SCR0, value2); + + debug ("DIMM0_B2_SCR0 = 0x%08x\n", value1); + debug ("DIMM0_B3_SCR0 = 0x%08x\n", value2); + + pci_write_cfg_long (0, 0, DIMM2_B4_SCR0, 0); + pci_write_cfg_long (0, 0, DIMM2_B5_SCR0, 0); + pci_write_cfg_long (0, 0, DIMM3_B6_SCR0, 0); + pci_write_cfg_long (0, 0, DIMM3_B7_SCR0, 0); + + /* Determine timing */ + select_cas (&banks[0], 0); + select_cas (&banks[2], 0); + + /* FIXME: What about write recovery */ + /* Auto refresh Precharge */ +#if 0 + reg32 = (0x3 << 13) | (0x7 << 10) | ((banks[0].trp - 2) << 8) | + /* Write recovery CAS Latency */ + (0x1 << 6) | (banks[0].cas_used << 4) | + /* RAS/CAS latency */ + ((banks[0].trcd - 1) << 0); + + reg32 |= ((0x3 << 13) | (0x7 << 10) | ((banks[2].trp - 2) << 8) | + (0x1 << 6) | (banks[2].cas_used << 4) | + ((banks[2].trcd - 1) << 0)) << 16; +#else + if (100000000 == gd->bus_clk) + reg32 = 0x71737173; + else + reg32 = 0x69736973; +#endif + pci_write_cfg_long (0, 0, DIMM0_TCR0, reg32); + debug ("DIMM0_TCR0 = 0x%08x\n", reg32); + + /* Write default in DIMM2/3 (not used on A1) */ + pci_write_cfg_long (0, 0, DIMM2_TCR0, 0x7d737d73); + + + /* Determine buffered/unbuffered mode for each SIMM. Uses first bank as reference (second, if present, uses the same) */ + reg32 = pci_read_cfg_long (0, 0, DRAM_GCR0); + reg32 &= 0xFF00FFFF; + +#if 0 + if (banks[0].used && banks[0].registered) + reg32 |= 0x1 << 16; + + if (banks[2].used && banks[2].registered) + reg32 |= 0x1 << 18; +#else + if (banks[0].registered || banks[2].registered) + reg32 |= 0x55 << 16; +#endif + pci_write_cfg_long (0, 0, DRAM_GCR0, reg32); + debug ("DRAM_GCR0 = 0x%08x\n", reg32); + + /* Determine refresh */ + refresh_clocks = 0xffffffff; + auto_refresh = 1; + + for (i = 0; i < 4; i++) { + if (banks[i].used) { + if (banks[i].auto_refresh == 0) + auto_refresh = 0; + if (banks[i].refresh_time < refresh_clocks) + refresh_clocks = banks[i].refresh_time; + } + } + + +#if 1 + /* It seems this is suggested by the ArticiaS data book */ + if (100000000 == gd->bus_clk) + refresh_clocks = 1561; + else + refresh_clocks = 2083; +#endif + + + debug ("Refresh set to %ld clocks, auto refresh %s\n", + refresh_clocks, auto_refresh ? "on" : "off"); + + pci_write_cfg_long (0, 0, DRAM_REFRESH0, + (1 << 16) | (1 << 15) | (auto_refresh << 12) | + (refresh_clocks)); + debug ("DRAM_REFRESH0 = 0x%08x\n", + (1 << 16) | (1 << 15) | (auto_refresh << 12) | + (refresh_clocks)); + +/* pci_write_cfg_long(0, 0, DRAM_REFRESH0, 0x00019400); */ + + /* Set mode registers */ + /* FIXME: For now, set same burst len for all modules. Dunno if that's necessary */ + /* Find a common burst len */ + burst_support = 0xff; + + if (banks[0].used) + burst_support = banks[0].burst_len; + if (banks[1].used) + burst_support = banks[1].burst_len; + if (banks[2].used) + burst_support = banks[2].burst_len; + if (banks[3].used) + burst_support = banks[3].burst_len; + + /* + ** Mode register: + ** Bits Use + ** 0-2 Burst len + ** 3 Burst type (0 = sequential, 1 = interleave) + ** 4-6 CAS latency + ** 7-8 Operation mode (0 = default, all others invalid) + ** 9 Write burst + ** 10-11 Reserved + ** + ** Mode register burst table: + ** A2 A1 A0 lenght + ** 0 0 0 1 + ** 0 0 1 2 + ** 0 1 0 4 + ** 0 1 1 8 + ** 1 0 0 invalid + ** 1 0 1 invalid + ** 1 1 0 invalid + ** 1 1 1 page (only valid for non-interleaved) + */ + + burst_len = burst_to_len (burst_support); + burst_len = 2; /* FIXME */ + + if (banks[0].used) { + pci_write_cfg_word (0, 0, DRAM_PCR0, + 0x8000 | burst_len | (banks[0].cas_used << 4)); + debug ("Mode bank 0: 0x%08x\n", + 0x8000 | burst_len | (banks[0].cas_used << 4)); + } else { + /* Seems to be needed to disable the bank */ + pci_write_cfg_word (0, 0, DRAM_PCR0, 0x0000 | 0x032); + } + + if (banks[1].used) { + pci_write_cfg_word (0, 0, DRAM_PCR0, + 0x9000 | burst_len | (banks[1].cas_used << 4)); + debug ("Mode bank 1: 0x%08x\n", + 0x8000 | burst_len | (banks[1].cas_used << 4)); + } else { + /* Seems to be needed to disable the bank */ + pci_write_cfg_word (0, 0, DRAM_PCR0, 0x1000 | 0x032); + } + + + if (banks[2].used) { + pci_write_cfg_word (0, 0, DRAM_PCR0, + 0xa000 | burst_len | (banks[2].cas_used << 4)); + debug ("Mode bank 2: 0x%08x\n", + 0x8000 | burst_len | (banks[2].cas_used << 4)); + } else { + /* Seems to be needed to disable the bank */ + pci_write_cfg_word (0, 0, DRAM_PCR0, 0x2000 | 0x032); + } + + + if (banks[3].used) { + pci_write_cfg_word (0, 0, DRAM_PCR0, + 0xb000 | burst_len | (banks[3].cas_used << 4)); + debug ("Mode bank 3: 0x%08x\n", + 0x8000 | burst_len | (banks[3].cas_used << 4)); + } else { + /* Seems to be needed to disable the bank */ + pci_write_cfg_word (0, 0, DRAM_PCR0, 0x3000 | 0x032); + } + + + pci_write_cfg_word (0, 0, 0xba, 0x00); + + return total_ram; +} + +extern int drv_isa_kbd_init (void); + +int last_stage_init (void) +{ + drv_isa_kbd_init (); + return 0; +} + +int overwrite_console (void) +{ + return (0); +} + +#define in_8 read_byte +#define out_8 write_byte + +static __inline__ unsigned long get_msr (void) +{ + unsigned long msr; + + asm volatile ("mfmsr %0":"=r" (msr):); + + return msr; +} + +static __inline__ void set_msr (unsigned long msr) +{ + asm volatile ("mtmsr %0"::"r" (msr)); +} + +int board_pre_init (void) +{ + unsigned char c_value = 0; + unsigned long msr; + + /* Basic init of PS/2 keyboard (needed for some reason)... */ + /* Ripped from John's code */ + while ((in_8 ((unsigned char *) 0xfe000064) & 0x02) != 0); + out_8 ((unsigned char *) 0xfe000064, 0xaa); + while ((in_8 ((unsigned char *) 0xfe000064) & 0x01) == 0); + c_value = in_8 ((unsigned char *) 0xfe000060); + while ((in_8 ((unsigned char *) 0xfe000064) & 0x02) != 0); + out_8 ((unsigned char *) 0xfe000064, 0xab); + while ((in_8 ((unsigned char *) 0xfe000064) & 0x01) == 0); + c_value = in_8 ((unsigned char *) 0xfe000060); + while ((in_8 ((unsigned char *) 0xfe000064) & 0x02) != 0); + out_8 ((unsigned char *) 0xfe000064, 0xae); +/* while ((in_8((unsigned char *)0xfe000064) & 0x01) == 0); */ +/* c_value = in_8((unsigned char *)0xfe000060); */ + + /* Enable FPU */ + msr = get_msr (); + set_msr (msr | MSR_FP); + + via_calibrate_bus_freq (); + + return 0; +} diff --git a/board/MAI/AmigaOneG3SE/articiaS.h b/board/MAI/AmigaOneG3SE/articiaS.h new file mode 100644 index 00000000000..158d70ab8eb --- /dev/null +++ b/board/MAI/AmigaOneG3SE/articiaS.h @@ -0,0 +1,143 @@ +#ifndef ARTICIAS_H +#define ARTICIAS_H + +#include "short_types.h" +#include <common.h> + +#define REG_GROUP 0xF0 + +/* ArticiaS registers */ +#define GLOBALINFO0 0x50 +#define GLOBALINFO1 0x51 +#define GLOBALINFO2 0x52 +#define GLOBALINFO3 0x53 +#define GLOBALCTL0 0x54 +#define GLOBALCTL1 0x55 +#define NVRAMCTL 0x56 +#define PCI1ACR0 0x58 +#define PCI1ACR1 0x59 +#define PCI1ACR2 0x5a +#define PCI1ACR3 0x5b +#define HBUSACR0 0x5c +#define HBUSACR1 0x5d +#define HBUSACR2 0x5e +#define HBUSACR3 0x5f +#define HOSTINT0 0x68 +#define HOSTINT1 0x69 +#define HOSTINT2 0x6a +#define HOSTINT3 0x6b +#define HOSTRBCR 0x70 +#define XDBCR 0x74 + +#define LBSBCR2 0xd2 + + +/* Memory controller */ + +#define DIMM0_B0_SCR0 0x90 +#define DIMM0_B1_SCR0 0x94 +#define DIMM1_B2_SCR0 0x98 +#define DIMM1_B3_SCR0 0x9c +#define DIMM2_B4_SCR0 0xa0 +#define DIMM2_B5_SCR0 0xa4 +#define DIMM3_B6_SCR0 0xa8 +#define DIMM3_B7_SCR0 0xac + +#define DIMM0_TCR0 0xb0 +#define DIMM1_TCR0 0xb2 +#define DIMM2_TCR0 0xb4 +#define DIMM3_TCR0 0xb6 + +#define DRAM_REFRESH0 0xb8 +#define DRAM_GCR0 0xc0 +#define DRAM_PCR0 0xc6 +#define DRAM_ECC0 0xc4 +#define SRAM_CR 0xc8 +#define DRAM_RAS_CTL0 0xcc +#define DRAM_RAS_CTL1 0xcd + +/* Bits for REG_GROUP */ +#define REG_GROUP_MULTI (1<<1) +#define REG_GROUP_SPECIAL (1<<3) +#define REG_GROUP_DIAG (0x1<<4) +#define REG_GROUP_POWER (0x2<<4) + + +#define GLOBALINFO0_BO (1<<7) + + +#define GLOBALINFO2_B1ARBITER (1<<6) + + +#define HBUSACR0_CPUAPC (1<<0) +#define HBUSACR0_NUMREQ_2 (0<<1) +#define HBUSACR0_NUMREQ_3 (1<<1) +#define HBUSACR0_NUMREQ_4 (2<<1) +#define HBUSACR0_NUMREQ_MASK (7<<1) +#define HBUSACR0_RAW (1<<6) +#define HBUSACR0_WAIT (1<<7) +#define HBUSACR0_RESERVED (0x30) + + +#define HBUSACR2_BURST (1<<0) +#define HBUSACR2_LAT (1<<1) + + +#define HBUSACR3_LMWC_SM (1<<0) +#define HBUSACR3_LMWC_PCI1 (1<<1) +#define HBUSACR3_LMWC_PCI0 (1<<2) +#define HBUSACR3_PMWC_PCI1 (1<<3) +#define HBUSACR3_PMWC_PCI0 (1<<4) +#define HBUSACR3_FKH (1<<5) +#define HBUSACR3_92H_EN (1<<6) +#define HBUSACR3_60H_64H_EN (1<<7) + + +#define HOSTRBCR_PREFETCH (1<<4) + + +#define XDBCR_HWTOXD (1<<0) +#define XDBCR_KBTOXD (1<<1) +#define XDBCR_RTCTOXD (1<<2) +#define XDBCR_SCALE_1_1 (0x0<<3) +#define XDBCR_SCALE_2_2 (0x1<<3) +#define XDBCR_SCALE_3_2 (0x2<<3) +#define XDBCR_SCALE_4_4 (0x3<<3) +#define XDBCR_SCALE_5_8 (0x4<<3) +#define XDBCR_SCALE_6_8 (0x5<<3) +#define XDBCR_SCALE_8_8 (0x6<<3) +#define XDBCR_SCALE_0_16 (0x7<<3) +#define XDBCR_XDPROM (1<<7) + + +#define LBSBCR2_1_RWAC (1<<2) + + +/* PCI controller */ +#define ARTICIAS_PCI_CFGADDR 0xfec00cf8 +#define ARTICIAS_PCI_CFGDATA 0xfee00cfc + +#define ARTICIAS_PCI_BUS 0x80000000 +#define ARTICIAS_PCI_MAXSIZE 0x7cffffff +#define ARTICIAS_PCI_PHYS 0x80000000 + +#define ARTICIAS_SYS_BUS 0x00000000 +#define ARTICIAS_SYS_MAXSIZE 0x7fffffff +#define ARTICIAS_SYS_PHYS 0x00000000 + +#define ARTICIAS_PCIIO_BUS 0x00800000 +#define ARTICIAS_PCIIO_MAXSIZE 0x003fffff +#define ARTICIAS_PCIIO_PHYS 0xfe800000 + +#define ARTICIAS_ISAIO_BUS 0x00002000 +#define ARTICIAS_ISAIO_MAXSIZE 0x0000d000 +#define ARTICIAS_ISAIO_PHYS 0xfe002000 + + + +/* Prototypes */ +long articiaS_ram_init(void); +void articiaS_pci_init(void); + + +#endif diff --git a/board/MAI/AmigaOneG3SE/articiaS_pci.c b/board/MAI/AmigaOneG3SE/articiaS_pci.c new file mode 100644 index 00000000000..774c32dd08c --- /dev/null +++ b/board/MAI/AmigaOneG3SE/articiaS_pci.c @@ -0,0 +1,573 @@ +/* + * (C) Copyright 2002 + * Hyperion Entertainment, Hans-JoergF@hyperion-entertainment.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <pci.h> +#include "memio.h" +#include "articiaS.h" + +//#define ARTICIA_PCI_DEBUG + +#ifdef ARTICIA_PCI_DEBUG +#define PRINTF(fmt,args...) printf (fmt ,##args) +#else +#define PRINTF(fmt,args...) +#endif + +struct pci_controller articiaS_hose; + +long irq_alloc(long wanted); + +static pci_dev_t pci_hose_find_class(struct pci_controller *hose, int bus, short find_class, int index); +static int articiaS_init_vga(void); +static void pci_cfgfunc_dummy(struct pci_controller *host, pci_dev_t dev, struct pci_config_table *table); +unsigned char pci_irq_alloc(void); + +extern void via_cfgfunc_via686(struct pci_controller * host, pci_dev_t dev, struct pci_config_table *table); +extern void via_cfgfunc_ide_init(struct pci_controller *host, pci_dev_t dev, struct pci_config_table *table); +extern void via_init_irq_routing(uint8 []); +extern void via_init_afterscan(void); + +#define cfgfunc_via686 1 +#define cfgfunc_dummy 2 +#define cfgfunc_ide_init 3 + +static struct pci_config_table config_table[] = +{ + { + 0x1106, PCI_ANY_ID, PCI_CLASS_BRIDGE_ISA, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, + (void *)cfgfunc_via686, {0, 0, 0} + }, + { + 0x1106, PCI_ANY_ID, PCI_ANY_ID, 0,7,4, + (void *)cfgfunc_dummy, {0,0,0} + }, + { + 0x1106, 0x3068, PCI_ANY_ID, 0, 7, PCI_ANY_ID, + (void *)cfgfunc_dummy, {0,0,0} + }, + { + 0x1106, PCI_ANY_ID, PCI_ANY_ID, 0,7,1, + (void *)cfgfunc_ide_init, {0,0,0} + }, + { + 0, + } +}; + + +void pci_cfgfunc_dummy(struct pci_controller *host, pci_dev_t dev, struct pci_config_table *table) +{ + + +} + +unsigned long irq_penalties[16] = +{ + 1000, /* 0:timer */ + 1000, /* 1:keyboard */ + 1000, /* 2:cascade */ + 50, /* 3:serial (COM2) */ + 50, /* 4:serial (COM1) */ + 4, /* 5:USB2 */ + 100, /* 6:floppy */ + 3, /* 7:parallel */ + 50, /* 8:AC97/MC97 */ + 0, /* 9: */ + 3, /* 10:: */ + 0, /* 11: */ + 3, /* 12: USB1 */ + 0, /* 13: */ + 100, /* 14: ide0 */ + 100, /* 15: ide1 */ +}; + + +/* + * The following defines a hard-coded interrupt mapping for the + * know devices on the board. + * If a device isn't found here, assumed to be a device that's + * plugged into a PCI or AGP slot + * NOTE: This table is machine dependant. + */ + +struct pci_irq_fixup_table +{ + uint8 bus; /* Bus number */ + uint8 device; /* Device number */ + uint8 func; /* Function number */ + uint8 interrupt; /* Interrupt to use (0xff to disable) */ +}; + +struct pci_irq_fixup_table fixuptab [] = +{ + { 0, 0, 0, 0xff}, /* Articia S host bridge */ + { 0, 1, 0, 0xff}, /* Articia S AGP bridge */ +// { 0, 6, 0, 0x05}, /* 3COM ethernet */ + { 0, 7, 0, 0xff}, /* VIA southbridge */ + { 0, 7, 1, 0x0e}, /* IDE controller in legacy mode */ +// { 0, 7, 2, 0x05}, /* First USB controller */ +// { 0, 7, 3, 0x0c}, /* Second USB controller (shares interrupt with ethernet) */ + { 0, 7, 4, 0xff}, /* ACPI Power Management */ +// { 0, 7, 5, 0x08}, /* AC97 */ +// { 0, 7, 6, 0x08}, /* MC97 */ + { 0xff, 0xff, 0xff, 0xff} +}; + + +/* + * This table maps IRQ's to PCI interrupts + */ + +uint8 pci_intmap[4] = {0, 0, 0, 0}; + +/* + * Map PCI slots to interrupt routings + * This table lists the device number assigned to a card inserted + * into the slot, along with a permutation for the slot's IRQ routing. + * NOTE: This table is machine dependant. + */ + +struct pci_slot_irq_routing +{ + uint8 bus; + uint8 device; + + uint8 ints[4]; +}; + +struct pci_slot_irq_routing amigaone_pci_routing[] = +{ + {0, 8, {0, 1, 2, 3}}, /* Slot 1 (left of riser slot) */ + {0, 9, {1, 2, 3, 0}}, /* Slot 2 (middle slot) */ + {0, 10, {2, 3, 0, 1}}, /* Slot 3 (leftmost slot) */ + {1, 0, {1, 0, 2, 3}}, /* AGP slot (only IRQA and IRQB) */ + {1, 1, {1, 2, 3, 0}}, /* PCI slot on AGP bus */ + {0, 6, {3, 3, 3, 3}}, /* On board ethernet */ + {0, 7, {0, 1, 2, 3}}, /* Southbridge */ + {0xff, 0, {0, 0, 0, 0}} +}; + +void articiaS_pci_irq_init(void) +{ + char *s; + + s = getenv("pci_irqa"); + if (s) + pci_intmap[0] = simple_strtoul (s, NULL, 10); + else + pci_intmap[0] = pci_irq_alloc(); + + s = getenv("pci_irqb"); + if (s) + pci_intmap[1] = simple_strtoul (s, NULL, 10); + else + pci_intmap[1] = pci_irq_alloc(); + + s = getenv("pci_irqc"); + if (s) + pci_intmap[2] = simple_strtoul (s, NULL, 10); + else + pci_intmap[2] = pci_irq_alloc(); + + s = getenv("pci_irqd"); + if (s) + pci_intmap[3] = simple_strtoul (s, NULL, 10); + else + pci_intmap[3] = pci_irq_alloc(); +} + + +unsigned char pci_irq_alloc(void) +{ + int i; + int interrupt = 10; + unsigned long min_penalty = 1000; + + /* Search for the minimal penalty, favoring interrupts at the end */ + for (i = 0; i < 16; i++) + { + if (irq_penalties[i] <= min_penalty) + { + interrupt = i; + min_penalty = irq_penalties[i]; + } + } + + PRINTF("pci_irq_alloc: Minimal penalty is %ld for %d\n", min_penalty, interrupt); + + irq_penalties[interrupt]++; + + return interrupt; +} + + +void articiaS_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev) +{ + int8 bus, device, func, pin, line; + int i; + + bus = PCI_BUS(dev); + device = PCI_DEV(dev); + func = PCI_FUNC(dev); + + PRINTF("Fixup irq of %d:%d.%d\n", bus, device, func); + + /* Search for the device in the table */ + for (i = 0; fixuptab[i].bus != 0xff; i++) + { + if (bus == fixuptab[i].bus && device == fixuptab[i].device && func == fixuptab[i].func) + { + /* If the device needs an interrupt, write it */ + if (fixuptab[i].interrupt != 0xff) + { + PRINTF("Assigning IRQ %d (fixed)\n", fixuptab[i].interrupt); + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, fixuptab[i].interrupt); + } + else + { + /* Otherwise, see if it wants an interrupt, and disable it if needed */ + pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); + if (pin) + { + PRINTF("Disabling IRQ\n"); + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 0xff); + } + } + + return; + } + } + + /* If we get here, we have another PCI device in a slot... find the appropriate IRQ */ + + /* Find matching pin */ + pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); + pin--; + + /* Search for it's map */ + for (i = 0; amigaone_pci_routing[i].bus != 0xff; i++) + { + if (bus == amigaone_pci_routing[i].bus && device == amigaone_pci_routing[i].device) + { + line = pci_intmap[amigaone_pci_routing[i].ints[pin]]; + PRINTF("Assigning IRQ %d (pin %d)\n", line, pin); + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, line); + return; + } + } + + PRINTF("Unkonwn PCI device found\n"); +} + +void articiaS_pci_init (void) +{ + int i; + char *s; + + PRINTF("atriciaS_pci_init\n"); + + // Why aren't these relocated?? + for (i=0; config_table[i].config_device; i++) + { + switch((int)config_table[i].config_device) + { + case cfgfunc_via686: config_table[i].config_device = via_cfgfunc_via686; break; + case cfgfunc_dummy: config_table[i].config_device = pci_cfgfunc_dummy; break; + case cfgfunc_ide_init: config_table[i].config_device = via_cfgfunc_ide_init; break; + default: PRINTF("Error: Unknown constant\n"); + } + } + + articiaS_hose.first_busno = 0; + articiaS_hose.last_busno = 0xff; + articiaS_hose.config_table = config_table; + articiaS_hose.fixup_irq = articiaS_pci_fixup_irq; + + articiaS_pci_irq_init(); + + /* System memory */ + pci_set_region(articiaS_hose.regions + 0, + ARTICIAS_SYS_BUS, + ARTICIAS_SYS_PHYS, + ARTICIAS_SYS_MAXSIZE, + PCI_REGION_MEM | PCI_REGION_MEMORY); + + /* PCI memory space */ + pci_set_region(articiaS_hose.regions + 1, + ARTICIAS_PCI_BUS, + ARTICIAS_PCI_PHYS, + ARTICIAS_PCI_MAXSIZE, + PCI_REGION_MEM); + + /* PCI io space */ + pci_set_region(articiaS_hose.regions + 2, + ARTICIAS_PCIIO_BUS, + ARTICIAS_PCIIO_PHYS, + ARTICIAS_PCIIO_MAXSIZE, + PCI_REGION_IO); + + /* PCI/ISA io space */ + pci_set_region(articiaS_hose.regions + 3, + ARTICIAS_ISAIO_BUS, + ARTICIAS_ISAIO_PHYS, + ARTICIAS_ISAIO_MAXSIZE, + PCI_REGION_IO); + + + + articiaS_hose.region_count = 4; + + pci_setup_indirect(&articiaS_hose, ARTICIAS_PCI_CFGADDR, ARTICIAS_PCI_CFGDATA); + PRINTF("Registering articia hose...\n"); + pci_register_hose(&articiaS_hose); + PRINTF("Enabling AGP...\n"); + pci_write_config_byte(PCI_BDF(0,0,0), 0x58, 0x01); + PRINTF("Scanning bus...\n"); + articiaS_hose.last_busno = pci_hose_scan(&articiaS_hose); + + via_init_irq_routing(pci_intmap); + + PRINTF("After-Scan results:\n"); + PRINTF("Bus range: %d - %d\n", articiaS_hose.first_busno , articiaS_hose.last_busno); + + via_init_afterscan(); + + pci_write_config_byte(PCI_BDF(0,1,0), PCI_INTERRUPT_LINE, 0xFF); + + s = getenv("as_irq"); + if (s) + { + pci_write_config_byte(PCI_BDF(0,0,0), PCI_INTERRUPT_LINE, simple_strtoul (s, NULL, 10)); + } + + s = getenv("x86_run_bios"); + if (!s || (s && strcmp(s, "on")==0)) + { + if (articiaS_init_vga() == -1) + { + /* If the VGA didn't init and we have stdout set to VGA, reset to serial */ +/* s = getenv("stdout"); */ +/* if (s && strcmp(s, "vga") == 0) */ +/* { */ +/* setenv("stdout", "serial"); */ +/* } */ + } + } + pci_write_config_byte(PCI_BDF(0,1,0), PCI_INTERRUPT_LINE, 0xFF); + +} + +pci_dev_t pci_hose_find_class(struct pci_controller *hose, int bus, short find_class, int index) +{ + unsigned int sub_bus, found_multi=0; + unsigned short vendor, class; + unsigned char header_type; + pci_dev_t dev; + u8 c1, c2; + + sub_bus = bus; + + for (dev = PCI_BDF(bus,0,0); + dev < PCI_BDF(bus,PCI_MAX_PCI_DEVICES-1,PCI_MAX_PCI_FUNCTIONS-1); + dev += PCI_BDF(0,0,1)) + { + if ( dev == PCI_BDF(hose->first_busno,0,0) ) + continue; + + if (PCI_FUNC(dev) && !found_multi) + continue; + + pci_hose_read_config_byte(hose, dev, PCI_HEADER_TYPE, &header_type); + + pci_hose_read_config_word(hose, dev, PCI_VENDOR_ID, &vendor); + + if (vendor != 0xffff && vendor != 0x0000) + { + + if (!PCI_FUNC(dev)) + found_multi = header_type & 0x80; + pci_hose_read_config_byte(hose, dev, 0x0B, &c1); + pci_hose_read_config_byte(hose, dev, 0x0A, &c2); + class = c1<<8 | c2; + //printf("At %02x:%02x:%02x: class %x\n", + // PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev), class); + if (class == find_class) + { + if (index == 0) + return dev; + else index--; + } + } + } + + return ~0; +} + + +/* + * For a given bus number, find the bridge on this hose that provides this + * bus number. The function scans for bridges and peeks config space offset + * 0x19 (PCI_SECONDARY_BUS). + */ +pci_dev_t pci_find_bridge_for_bus(struct pci_controller *hose, int busnr) +{ + pci_dev_t dev; + int bus; + unsigned int found_multi=0; + unsigned char header_type; + unsigned short vendor; + unsigned char secondary_bus; + + if (hose == NULL) hose = &articiaS_hose; + + if (busnr < hose->first_busno || busnr > hose->last_busno) return PCI_ANY_ID; // Not in range + + /* + * The bridge must be on a lower bus number + */ + for (bus = hose->first_busno; bus < busnr; bus++) + { + for (dev = PCI_BDF(bus,0,0); + dev < PCI_BDF(bus,PCI_MAX_PCI_DEVICES-1,PCI_MAX_PCI_FUNCTIONS-1); + dev += PCI_BDF(0,0,1)) + { + if ( dev == PCI_BDF(hose->first_busno,0,0) ) + continue; + + if (PCI_FUNC(dev) && !found_multi) + continue; + + pci_hose_read_config_byte(hose, dev, PCI_HEADER_TYPE, &header_type); + + pci_hose_read_config_word(hose, dev, PCI_VENDOR_ID, &vendor); + + if (vendor != 0xffff && vendor != 0x0000) + { + + if (!PCI_FUNC(dev)) + found_multi = header_type & 0x80; + if (header_type == 1) // Bridge device header + { + pci_hose_read_config_byte(hose, dev, PCI_SECONDARY_BUS, &secondary_bus); + if ((int)secondary_bus == busnr) return dev; + } + + } + } + } + return PCI_ANY_ID; +} + +static short classes[] = +{ + PCI_CLASS_DISPLAY_VGA, + PCI_CLASS_DISPLAY_XGA, + PCI_CLASS_DISPLAY_3D, + PCI_CLASS_DISPLAY_OTHER, + ~0 +}; + +extern int execute_bios(pci_dev_t gr_dev, void *); + +pci_dev_t video_dev; + +int articiaS_init_vga (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + extern void shutdown_bios(void); + pci_dev_t dev = ~0; + int busnr = 0; + int classnr = 0; + + video_dev = PCI_ANY_ID; + + printf("VGA: "); + + PRINTF("Trying to initialize x86 VGA Card(s)\n"); + + while (dev == ~0) + { + PRINTF("Searching for class 0x%x on bus %d\n", classes[classnr], busnr); + /* Find the first of this class on this bus */ + dev = pci_hose_find_class(&articiaS_hose, busnr, classes[classnr], 0); + if (dev != ~0) break; + busnr++; + if (busnr > articiaS_hose.last_busno) + { + busnr = 0; + classnr ++; + if (classes[classnr] == ~0) + { + printf("NOT PRESENT\n"); + return -1; + } + } + } + + /* + * If we get here we have found the first graphics card. + * If the bus number is not 0, then it is probably behind a bridge, and the + * bridge needs to be told to forward VGA access. + */ + + if (PCI_BUS(dev) != 0) + { + pci_dev_t bridge; + PRINTF("Behind bridge, looking for bridge\n"); + bridge = pci_find_bridge_for_bus(&articiaS_hose, PCI_BUS(dev)); + if (dev != PCI_ANY_ID) + { + unsigned char agp_control_0; + PRINTF("Got the bridge at %02x:%02x:%02x\n", + PCI_BUS(bridge), PCI_DEV(bridge), PCI_FUNC(bridge)); + pci_hose_read_config_byte(&articiaS_hose, bridge, 0x3E, &agp_control_0); + agp_control_0 |= 0x18; + pci_hose_write_config_byte(&articiaS_hose, bridge, 0x3E, agp_control_0); + PRINTF("Configured for VGA forwarding\n"); + } + } + + /* + * Now try to run the bios + */ + + if (execute_bios(dev, gd->relocaddr)) + { + printf("OK\n"); + video_dev = dev; + } + else + { + printf("ERROR\n"); + } + + PRINTF("Done scanning.\n"); + + shutdown_bios(); + + if (dev == PCI_ANY_ID) return -1; + else return 0; + +} diff --git a/board/MAI/AmigaOneG3SE/board_asm_init.S b/board/MAI/AmigaOneG3SE/board_asm_init.S new file mode 100644 index 00000000000..a421c5dc435 --- /dev/null +++ b/board/MAI/AmigaOneG3SE/board_asm_init.S @@ -0,0 +1,157 @@ + #include "macros.h" + + + +#define GLOBALINFO0 0x50 +#define GLOBALINFO0_BO (1<<7) +#define GLOBALINFO2_B1ARBITER (1<<6) +#define HBUSACR0 0x5c +#define HBUSACR2_BURST (1<<0) +#define HBUSACR2_LAT (1<<1) + +#define RECEIVER_HOLDING 0 +#define TRANSMITTER_HOLDING 0 +#define INTERRUPT_ENABLE 1 +#define INTERRUPT_STATUS 2 +#define FIFO_CONTROL 2 +#define LINE_CONTROL 3 +#define MODEM_CONTROL 4 +#define LINE_STATUS 5 +#define MODEM_STATUS 6 +#define SCRATCH_PAD 7 + +#define DIVISOR_LATCH_LSB 0 +#define DIVISOR_LATCH_MSB 1 +#define PRESCALER_DIVISION 5 + +#define UART(x) (0x3f8+(x)) + +#define GLOBALINFO0 0x50 +#define GLOBALINFO0_BO (1<<7) +#define GLOBALINFO2_B1ARBITER (1<<6) +#define HBUSACR0 0x5c +#define HBUSACR2_BURST (1<<0) +#define HBUSACR2_LAT (1<<1) + +#define SUPERIO_1 ((7 << 3) | (0)) +#define SUPERIO_2 ((7 << 3) | (1)) + + .globl board_asm_init + +board_asm_init: + mflr r29 + /* Set 'Must-set' register */ + li r3, 0 + li r4, 0 + li r5, 0x5e + bl pci_read_cfg_byte + ori r3, r3, (1<<1) + xori r6, r3, (1<<1) + li r3, 0 + bl pci_write_cfg_byte + + li r3, 0 + li r5, 0x52 + bl pci_read_cfg_byte + ori r6, r3, (1<<6) + li r3, 0 + bl pci_write_cfg_byte + + li r3, 0 + li r4, 0x08 + li r5, 0xd2 + bl pci_read_cfg_byte + ori r6, r3, (1<<2) + li r3, 0 + bl pci_write_cfg_byte + + + /* Do PCI reset */ +/* li r3, 0 + li r4, 0x38 + li r5, 0x47 + bl pci_read_cfg_byte + ori r6, r3, 0x01 + li r3, 0 + li r4, 0x38 + li r5, 0x47 + bl pci_write_cfg_byte*/ + + + /* Enable NVRAM for environment */ + li r3, 0 + li r4, 0 + li r5, 0x56 + li r6, 0x0B + bl pci_write_cfg_byte + + + /* Init Super-I/O chips */ + + siowb 0x40, 0x08 + siowb 0x41, 0x01 + siowb 0x45, 0x80 + siowb 0x46, 0x60 + siowb 0x47, 0x20 + siowb 0x48, 0x01 + siowb 0x4a, 0xc4 + siowb 0x50, 0x0e + siowb 0x51, 0x76 + siowb 0x52, 0x34 + siowb 0x54, 0x00 + siowb 0x55, 0x90 + siowb 0x56, 0x99 + siowb 0x57, 0x90 + siowb 0x85, 0x01 + + /* Enable configuration mode for SuperIO */ + li r3, 0 + li r4, (7<<3) + li r5, 0x85 + bl pci_read_cfg_byte + ori r6, r3, 0x02 + mr r31, r6 + li r3,0 + bl pci_write_cfg_byte + + /* COM1 as 3f8 */ + outb 0x3f0, 0xe7 + outb 0x3f1, 0xfe + + /* COM2 as 2f8 */ + outb 0x3f0, 0xe8 + outb 0x3f1, 0xeb + + /* Enable */ + outb 0x3f0, 0xe2 + inb r3, 0x3f1 + ori r3, r3, 0x0c + outb 0x3f0, 0xe2 + outbr 0x3f1, r3 + + /* Disable configuration mode */ + li r3, 0 + li r4, (7<<3) + li r5, 0x85 + mr r6, r31 + bl pci_write_cfg_byte + + /* Set line control */ + outb UART(LINE_CONTROL), 0x83 + outb UART(DIVISOR_LATCH_LSB), 0x0c + outb UART(DIVISOR_LATCH_MSB), 0x00 + outb UART(LINE_CONTROL), 0x3 + + mtlr r29 + blr + + + .globl new_reset + .globl new_reset_end +new_reset: + li r0, 0x100 + oris r0, r0, 0xFFF0 + mtlr r0 + blr + +new_reset_end:
\ No newline at end of file diff --git a/board/MAI/AmigaOneG3SE/cmd_boota.c b/board/MAI/AmigaOneG3SE/cmd_boota.c new file mode 100644 index 00000000000..140aaff0447 --- /dev/null +++ b/board/MAI/AmigaOneG3SE/cmd_boota.c @@ -0,0 +1,123 @@ +#include <common.h> +#include <command.h> +#include <cmd_boota.h> +#include "../disk/part_amiga.h" +#include <asm/cache.h> + + +#undef BOOTA_DEBUG + +#ifdef BOOTA_DEBUG +#define PRINTF(fmt,args...) printf (fmt ,##args) +#else +#define PRINTF(fmt,args...) +#endif + +struct block_header { + u32 id; + u32 summed_longs; + s32 chk_sum; +}; + +extern block_dev_desc_t *ide_get_dev (int dev); +extern struct bootcode_block *get_bootcode (block_dev_desc_t * dev_desc); +extern int sum_block (struct block_header *header); + +struct bootcode_block bblk; + +int do_boota (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + unsigned char *load_address = (unsigned char *) CFG_LOAD_ADDR; + unsigned char *base_address; + unsigned long offset; + + unsigned long part_number = 0; + block_dev_desc_t *boot_disk; + char *s; + struct bootcode_block *boot_code; + + /* Get parameters */ + + switch (argc) { + case 2: + load_address = (unsigned char *) simple_strtol (argv[1], NULL, 16); + part_number = 0; + break; + case 3: + load_address = (unsigned char *) simple_strtol (argv[1], NULL, 16); + part_number = simple_strtol (argv[2], NULL, 16); + break; + } + + base_address = load_address; + + PRINTF ("Loading boot code from disk %d to %p\n", part_number, + load_address); + + /* Find the appropriate disk device */ + boot_disk = ide_get_dev (part_number); + if (!boot_disk) { + PRINTF ("Unknown disk %d\n", part_number); + return 1; + } + + /* Find the bootcode block */ + boot_code = get_bootcode (boot_disk); + if (!boot_code) { + PRINTF ("Not a bootable disk %d\n", part_number); + return 1; + } + + /* Only use the offset from the first block */ + offset = boot_code->load_data[0]; + memcpy (load_address, &boot_code->load_data[1], 122 * 4); + load_address += 122 * 4; + + /* Setup for the loop */ + bblk.next = boot_code->next; + boot_code = &bblk; + + /* Scan the chain, and copy the loader succesively into the destination area */ + while (0xffffffff != boot_code->next) { + PRINTF ("Loading block %d\n", boot_code->next); + + /* Load block */ + if (1 != + boot_disk->block_read (boot_disk->dev, boot_code->next, 1, + (ulong *) & bblk)) { + PRINTF ("Read error\n"); + return 1; + } + + /* check sum */ + if (sum_block ((struct block_header *) (ulong *) & bblk) != 0) { + PRINTF ("Checksum error\n"); + return 1; + } + + /* Ok, concatenate it to the already loaded code */ + memcpy (load_address, boot_code->load_data, 123 * 4); + load_address += 123 * 4; + } + + printf ("Bootcode loaded to %p (size %d)\n", base_address, + load_address - base_address); + printf ("Entry point at %p\n", base_address + offset); + + flush_cache (base_address, load_address - base_address); + + + s = getenv ("autostart"); + if (s && strcmp (s, "yes") == 0) { + DECLARE_GLOBAL_DATA_PTR; + + void (*boot) (bd_t *, char *, block_dev_desc_t *); + char *args; + + boot = (void (*)(bd_t *, char *, block_dev_desc_t *)) (base_address + offset); + boot (gd->bd, getenv ("amiga_bootargs"), boot_disk); + } + + + return 0; +} diff --git a/board/MAI/AmigaOneG3SE/config.mk b/board/MAI/AmigaOneG3SE/config.mk new file mode 100644 index 00000000000..0537cd977ad --- /dev/null +++ b/board/MAI/AmigaOneG3SE/config.mk @@ -0,0 +1,33 @@ +# +# (C) Copyright 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# AmigaOneG3SE boards +# + +X86EMU = -I../bios_emulator/scitech/include -I../bios_emulator/scitech/src/x86emu + +TEXT_BASE = 0xfff00000 + +PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -Wa,-mregnames -DEASTEREGG $(X86EMU) #-DDEBUG + diff --git a/board/MAI/AmigaOneG3SE/enet.c b/board/MAI/AmigaOneG3SE/enet.c new file mode 100644 index 00000000000..0aaa8bf6396 --- /dev/null +++ b/board/MAI/AmigaOneG3SE/enet.c @@ -0,0 +1,886 @@ +/* + * (C) Copyright 2002 + * Adam Kowalczyk, ACK Software Controls Inc. akowalczyk@cogeco.ca + * + * Some portions taken from 3c59x.c Written 1996-1999 by Donald Becker. + * + * Outline of the program based on eepro100.c which is + * + * (C) Copyright 2002 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <malloc.h> +#include <net.h> +#include <asm/io.h> +#include <pci.h> + +#include "articiaS.h" +#include "memio.h" + +/* 3Com Ethernet PCI definitions*/ + +// #define PCI_VENDOR_ID_3COM 0x10B7 +#define PCI_DEVICE_ID_3COM_3C905C 0x9200 + +/* 3Com Commands, top 5 bits are command and bottom 11 bits are parameters */ + +#define TotalReset (0<<11) +#define SelectWindow (1<<11) +#define StartCoax (2<<11) +#define RxDisable (3<<11) +#define RxEnable (4<<11) +#define RxReset (5<<11) +#define UpStall (6<<11) +#define UpUnstall (6<<11)+1 +#define DownStall (6<<11)+2 +#define DownUnstall (6<<11)+3 +#define RxDiscard (8<<11) +#define TxEnable (9<<11) +#define TxDisable (10<<11) +#define TxReset (11<<11) +#define FakeIntr (12<<11) +#define AckIntr (13<<11) +#define SetIntrEnb (14<<11) +#define SetStatusEnb (15<<11) +#define SetRxFilter (16<<11) +#define SetRxThreshold (17<<11) +#define SetTxThreshold (18<<11) +#define SetTxStart (19<<11) +#define StartDMAUp (20<<11) +#define StartDMADown (20<<11)+1 +#define StatsEnable (21<<11) +#define StatsDisable (22<<11) +#define StopCoax (23<<11) +#define SetFilterBit (25<<11) + +/* The SetRxFilter command accepts the following classes */ + +#define RxStation 1 +#define RxMulticast 2 +#define RxBroadcast 4 +#define RxProm 8 + +/* 3Com status word defnitions */ + +#define IntLatch 0x0001 +#define HostError 0x0002 +#define TxComplete 0x0004 +#define TxAvailable 0x0008 +#define RxComplete 0x0010 +#define RxEarly 0x0020 +#define IntReq 0x0040 +#define StatsFull 0x0080 +#define DMADone (1<<8) +#define DownComplete (1<<9) +#define UpComplete (1<<10) +#define DMAInProgress (1<<11) /* DMA controller is still busy.*/ +#define CmdInProgress (1<<12) /* EL3_CMD is still busy.*/ + +/* Polling Registers */ + +#define DnPoll 0x2d +#define UpPoll 0x3d + +/* Register window 0 offets */ + +#define Wn0EepromCmd 10 /* Window 0: EEPROM command register. */ +#define Wn0EepromData 12 /* Window 0: EEPROM results register. */ +#define IntrStatus 0x0E /* Valid in all windows. */ + +/* Register window 0 EEPROM bits */ + +#define EEPROM_Read 0x80 +#define EEPROM_WRITE 0x40 +#define EEPROM_ERASE 0xC0 +#define EEPROM_EWENB 0x30 /* Enable erasing/writing for 10 msec. */ +#define EEPROM_EWDIS 0x00 /* Disable EWENB before 10 msec timeout. */ + +/* EEPROM locations. */ + +#define PhysAddr01 0 +#define PhysAddr23 1 +#define PhysAddr45 2 +#define ModelID 3 +#define EtherLink3ID 7 +#define IFXcvrIO 8 +#define IRQLine 9 +#define NodeAddr01 10 +#define NodeAddr23 11 +#define NodeAddr45 12 +#define DriverTune 13 +#define Checksum 15 + +/* Register window 1 offsets, the window used in normal operation */ + +#define TX_FIFO 0x10 +#define RX_FIFO 0x10 +#define RxErrors 0x14 +#define RxStatus 0x18 +#define Timer 0x1A +#define TxStatus 0x1B +#define TxFree 0x1C /* Remaining free bytes in Tx buffer. */ + +/* Register Window 2 */ + +#define Wn2_ResetOptions 12 + +/* Register Window 3: MAC/config bits */ + +#define Wn3_Config 0 /* Internal Configuration */ +#define Wn3_MAC_Ctrl 6 +#define Wn3_Options 8 + +#define BFEXT(value, offset, bitcount) \ + ((((unsigned long)(value)) >> (offset)) & ((1 << (bitcount)) - 1)) + +#define BFINS(lhs, rhs, offset, bitcount) \ + (((lhs) & ~((((1 << (bitcount)) - 1)) << (offset))) | \ + (((rhs) & ((1 << (bitcount)) - 1)) << (offset))) + +#define RAM_SIZE(v) BFEXT(v, 0, 3) +#define RAM_WIDTH(v) BFEXT(v, 3, 1) +#define RAM_SPEED(v) BFEXT(v, 4, 2) +#define ROM_SIZE(v) BFEXT(v, 6, 2) +#define RAM_SPLIT(v) BFEXT(v, 16, 2) +#define XCVR(v) BFEXT(v, 20, 4) +#define AUTOSELECT(v) BFEXT(v, 24, 1) + +/* Register Window 4: Xcvr/media bits */ + +#define Wn4_FIFODiag 4 +#define Wn4_NetDiag 6 +#define Wn4_PhysicalMgmt 8 +#define Wn4_Media 10 + +#define Media_SQE 0x0008 /* Enable SQE error counting for AUI. */ +#define Media_10TP 0x00C0 /* Enable link beat and jabber for 10baseT. */ +#define Media_Lnk 0x0080 /* Enable just link beat for 100TX/100FX. */ +#define Media_LnkBeat 0x0800 + +/* Register Window 7: Bus Master control */ + +#define Wn7_MasterAddr 0 +#define Wn7_MasterLen 6 +#define Wn7_MasterStatus 12 + +/* Boomerang bus master control registers. */ + +#define PktStatus 0x20 +#define DownListPtr 0x24 +#define FragAddr 0x28 +#define FragLen 0x2c +#define TxFreeThreshold 0x2f +#define UpPktStatus 0x30 +#define UpListPtr 0x38 + +/* The Rx and Tx descriptor lists. */ + +#define LAST_FRAG 0x80000000 /* Last Addr/Len pair in descriptor. */ +#define DN_COMPLETE 0x00010000 /* This packet has been downloaded */ + +struct rx_desc_3com { + u32 next; /* Last entry points to 0 */ + u32 status; /* FSH -> Frame Start Header */ + u32 addr; /* Up to 63 addr/len pairs possible */ + u32 length; /* Set LAST_FRAG to indicate last pair */ +}; + +/* Values for the Rx status entry. */ + +#define RxDComplete 0x00008000 +#define RxDError 0x4000 +#define IPChksumErr (1<<25) +#define TCPChksumErr (1<<26) +#define UDPChksumErr (1<<27) +#define IPChksumValid (1<<29) +#define TCPChksumValid (1<<30) +#define UDPChksumValid (1<<31) + +struct tx_desc_3com { + u32 next; /* Last entry points to 0 */ + u32 status; /* bits 0:12 length, others see below */ + u32 addr; + u32 length; +}; + +/* Values for the Tx status entry. */ + +#define CRCDisable 0x2000 +#define TxDComplete 0x8000 +#define AddIPChksum 0x02000000 +#define AddTCPChksum 0x04000000 +#define AddUDPChksum 0x08000000 +#define TxIntrUploaded 0x80000000 /* IRQ when in FIFO, but maybe not sent. */ + +/* XCVR Types */ + +#define XCVR_10baseT 0 +#define XCVR_AUI 1 +#define XCVR_10baseTOnly 2 +#define XCVR_10base2 3 +#define XCVR_100baseTx 4 +#define XCVR_100baseFx 5 +#define XCVR_MII 6 +#define XCVR_NWAY 8 +#define XCVR_ExtMII 9 +#define XCVR_Default 10 /* I don't think this is correct -> should have been 0x10 if Auto Negotiate */ + +struct descriptor { /* A generic descriptor. */ + u32 next; /* Last entry points to 0 */ + u32 status; /* FSH -> Frame Start Header */ + u32 addr; /* Up to 63 addr/len pairs possible */ + u32 length; /* Set LAST_FRAG to indicate last pair */ +}; + +/* Misc. definitions */ + +#define NUM_RX_DESC PKTBUFSRX * 10 +#define NUM_TX_DESC 1 /* Number of TX descriptors */ + +#define TOUT_LOOP 1000000 + +#define ETH_ALEN 6 + +#define EL3WINDOW(dev, win_num) ETH_OUTW(dev, SelectWindow + (win_num), EL3_CMD) +#define EL3_CMD 0x0e +#define EL3_STATUS 0x0e + + +#undef ETH_DEBUG + +#ifdef ETH_DEBUG +#define PRINTF(fmt,args...) printf (fmt ,##args) +#else +#define PRINTF(fmt,args...) +#endif + + +static struct rx_desc_3com *rx_ring; /* RX descriptor ring */ +static struct tx_desc_3com *tx_ring; /* TX descriptor ring */ +static u8 rx_buffer[NUM_RX_DESC][PKTSIZE_ALIGN]; /* storage for the incoming messages */ +static int rx_next = 0; /* RX descriptor ring pointer */ +static int tx_next = 0; /* TX descriptor ring pointer */ +static int tx_threshold; + +static void init_rx_ring(struct eth_device* dev); +static void purge_tx_ring(struct eth_device* dev); + +static void read_hw_addr(struct eth_device* dev, bd_t * bis); + +static int eth_3com_init(struct eth_device* dev, bd_t *bis); +static int eth_3com_send(struct eth_device* dev, volatile void *packet, int length); +static int eth_3com_recv(struct eth_device* dev); +static void eth_3com_halt(struct eth_device* dev); + +#define io_to_phys(a) pci_io_to_phys((pci_dev_t)dev->priv, a) +#define phys_to_io(a) pci_phys_to_io((pci_dev_t)dev->priv, a) +#define mem_to_phys(a) pci_mem_to_phys((pci_dev_t)dev->priv, a) +#define phys_to_mem(a) pci_phys_to_mem((pci_dev_t)dev->priv, a) + +static inline int ETH_INL(struct eth_device* dev, u_long addr) +{ + __asm volatile ("eieio"); + return le32_to_cpu(*(volatile u32 *)io_to_phys(addr + dev->iobase)); +} + +static inline int ETH_INW(struct eth_device* dev, u_long addr) +{ + __asm volatile ("eieio"); + return le16_to_cpu(*(volatile u16 *)io_to_phys(addr + dev->iobase)); +} + +static inline int ETH_INB(struct eth_device* dev, u_long addr) +{ + __asm volatile ("eieio"); + return *(volatile u8 *)io_to_phys(addr + dev->iobase); +} + +static inline void ETH_OUTB(struct eth_device* dev, int command, u_long addr) +{ + *(volatile u8 *)io_to_phys(addr + dev->iobase) = command; + __asm volatile ("eieio"); +} + +static inline void ETH_OUTW(struct eth_device* dev, int command, u_long addr) +{ + *(volatile u16 *)io_to_phys(addr + dev->iobase) = cpu_to_le16(command); + __asm volatile ("eieio"); +} + +static inline void ETH_OUTL(struct eth_device* dev, int command, u_long addr) +{ + *(volatile u32 *)io_to_phys(addr + dev->iobase) = cpu_to_le32(command); + __asm volatile ("eieio"); +} + +static inline int ETH_STATUS(struct eth_device* dev) +{ + __asm volatile ("eieio"); + return le16_to_cpu(*(volatile u16 *)io_to_phys(EL3_STATUS + dev->iobase)); +} + +static inline void ETH_CMD(struct eth_device* dev, int command) +{ + *(volatile u16 *)io_to_phys(EL3_CMD + dev->iobase) = cpu_to_le16(command); + __asm volatile ("eieio"); +} + +/* Command register is always in the same spot in all the register windows */ +/* This function issues a command and waits for it so complete by checking the CmdInProgress bit */ + +static int issue_and_wait(struct eth_device* dev, int command) +{ + + int i, status; + + ETH_CMD(dev, command); + for (i = 0; i < 2000; i++) { + status = ETH_STATUS(dev); + //printf ("Issue: status 0x%4x.\n", status); + if (!(status & CmdInProgress)) + return 1; + } + + /* OK, that didn't work. Do it the slow way. One second */ + for (i = 0; i < 100000; i++) { + status = ETH_STATUS(dev); + //printf ("Issue: status 0x%4x.\n", status); + return 1; + udelay(10); + } + PRINTF("Ethernet command: 0x%4x did not complete! Status: 0x%4x\n", command, ETH_STATUS(dev) ); + return 0; +} + +/* Determine network media type and set up 3com accordingly */ +/* I think I'm going to start with something known first like 10baseT */ + +static int auto_negotiate(struct eth_device* dev) +{ + int i; + + EL3WINDOW(dev, 1); + + // Wait for Auto negotiation to complete + for (i = 0; i <= 1000; i++) + { + if (ETH_INW(dev, 2) & 0x04) + break; + udelay(100); + + if (i == 1000) + { + PRINTF("Error: Auto negotiation failed\n"); + return 0; + } + } + + + + return 1; +} + +void eth_interrupt(struct eth_device *dev) +{ + u16 status = ETH_STATUS(dev); + + printf("eth0: status = 0x%04x\n", status); + + if (!(status & IntLatch)) + return; + + if (status & (1<<6)) + { + ETH_CMD(dev, AckIntr | (1<<6)); + printf("Acknowledged Interrupt command\n"); + } + + if (status & DownComplete) + { + ETH_CMD(dev, AckIntr | DownComplete); + printf("Acknowledged DownComplete\n"); + } + + if (status & UpComplete) + { + ETH_CMD(dev, AckIntr | UpComplete); + printf("Acknowledged UpComplete\n"); + } + + ETH_CMD(dev, AckIntr | IntLatch); + printf("Acknowledged IntLatch\n"); +} + +int eth_3com_initialize(bd_t *bis) +{ + u32 eth_iobase = 0, status; + int card_number = 0, ret; + struct eth_device* dev; + pci_dev_t devno; + char *s; + + s = getenv("3com_base"); + + /* Find ethernet controller on the PCI bus */ + + if ((devno = pci_find_device(PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3C905C, 0)) < 0) + { + PRINTF("Error: Cannot find the ethernet device on the PCI bus\n"); + goto Done; + } + + if (s) + { + unsigned long base = atoi(s); + pci_write_config_dword(devno, PCI_BASE_ADDRESS_0, base | 0x01); + } + + ret = pci_read_config_dword(devno, PCI_BASE_ADDRESS_0, ð_iobase); + eth_iobase &= ~0xf; + + PRINTF("eth: 3Com Found at Address: 0x%x\n", eth_iobase); + + pci_write_config_dword(devno, PCI_COMMAND, PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); + + /* Check if I/O accesses and Bus Mastering are enabled */ + + ret = pci_read_config_dword(devno, PCI_COMMAND, &status); + + if (!(status & PCI_COMMAND_IO)) + { + printf("Error: Cannot enable IO access.\n"); + goto Done; + } + + if (!(status & PCI_COMMAND_MEMORY)) + { + printf("Error: Cannot enable MEMORY access.\n"); + goto Done; + } + + if (!(status & PCI_COMMAND_MASTER)) + { + printf("Error: Cannot enable Bus Mastering.\n"); + goto Done; + } + + dev = (struct eth_device*) malloc(sizeof(*dev)); //struct eth_device)); + + sprintf(dev->name, "3Com 3c920c#%d", card_number); + dev->iobase = eth_iobase; + dev->priv = (void*) devno; + dev->init = eth_3com_init; + dev->halt = eth_3com_halt; + dev->send = eth_3com_send; + dev->recv = eth_3com_recv; + + eth_register(dev); + +/* { */ +/* char interrupt; */ +/* devno = pci_find_device(PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3C905C, 0); */ +/* pci_read_config_byte(devno, PCI_INTERRUPT_LINE, &interrupt); */ + +/* printf("Installing eth0 interrupt handler to %d\n", interrupt); */ +/* irq_install_handler(interrupt, eth_interrupt, dev); */ +/* } */ + + card_number++; + + /* Set the latency timer for value */ + s = getenv("3com_latency"); + if (s) + { + ret = pci_write_config_byte(devno, PCI_LATENCY_TIMER, (unsigned char)atoi(s)); + } + else ret = pci_write_config_byte(devno, PCI_LATENCY_TIMER, 0x0a); + + read_hw_addr(dev, bis); /* get the MAC address from Window 2*/ + + /* Reset the ethernet controller */ + + PRINTF ("Issuing reset command....\n"); + if (!issue_and_wait(dev, TotalReset)) + { + printf("Error: Cannot reset ethernet controller.\n"); + goto Done; + } + else + PRINTF ("Ethernet controller reset.\n"); + + /* allocate memory for rx and tx rings */ + + if(!(rx_ring = memalign(sizeof(struct rx_desc_3com) * NUM_RX_DESC, 16))) + { + PRINTF ("Cannot allocate memory for RX_RING.....\n"); + goto Done; + } + + if (!(tx_ring = memalign(sizeof(struct tx_desc_3com) * NUM_TX_DESC, 16))) + { + PRINTF ("Cannot allocate memory for TX_RING.....\n"); + goto Done; + } + +Done: + return status; +} + + +static int eth_3com_init(struct eth_device* dev, bd_t *bis) +{ + int i, status = 0; + int tx_cur, loop; + u16 status_enable, intr_enable; + struct descriptor *ias_cmd; + + /* Determine what type of network the machine is connected to */ + /* presently drops the connect to 10Mbps */ + + if (!auto_negotiate(dev)) + { + printf("Error: Cannot determine network media.\n"); + goto Done; + } + + issue_and_wait(dev, TxReset); + issue_and_wait(dev, RxReset|0x04); + + /* Switch to register set 7 for normal use. */ + EL3WINDOW(dev, 7); + + /* Initialize Rx and Tx rings */ + + init_rx_ring(dev); + purge_tx_ring(dev); + + ETH_CMD(dev, SetRxFilter | RxStation | RxBroadcast | RxProm); + + issue_and_wait(dev,SetTxStart|0x07ff); + + /* Below sets which indication bits to be seen. */ + + status_enable = SetStatusEnb | HostError | DownComplete | UpComplete | (1<<6); + ETH_CMD(dev, status_enable); + + /* Below sets no bits are to cause an interrupt since this is just polling */ + + intr_enable = SetIntrEnb; +// intr_enable = SetIntrEnb | (1<<9) | (1<<10) | (1<<6); + ETH_CMD(dev, intr_enable); + ETH_OUTB(dev, 127, UpPoll); + + /* Ack all pending events, and set active indicator mask */ + + ETH_CMD(dev, AckIntr | IntLatch | TxAvailable | RxEarly | IntReq); + ETH_CMD(dev, intr_enable); + + /* Tell the adapter where the RX ring is located */ + + issue_and_wait(dev,UpStall); /* Stall and set the UplistPtr */ + ETH_OUTL(dev, (u32)&rx_ring[rx_next], UpListPtr); + ETH_CMD(dev, RxEnable); /* Enable the receiver. */ + issue_and_wait(dev,UpUnstall); + + /* Send the Individual Address Setup frame */ + + tx_cur = tx_next; + tx_next = ((tx_next+1) % NUM_TX_DESC); + + ias_cmd = (struct descriptor *)&tx_ring[tx_cur]; + ias_cmd->status = cpu_to_le32(1<<31); /* set DnIndicate bit. */ + ias_cmd->next = 0; + ias_cmd->addr = cpu_to_le32((u32)&bis->bi_enetaddr[0]); + ias_cmd->length = cpu_to_le32(6 | LAST_FRAG); + + /* Tell the adapter where the TX ring is located */ + + ETH_CMD(dev, TxEnable); /* Enable transmitter. */ + issue_and_wait(dev, DownStall); /* Stall and set the DownListPtr. */ + ETH_OUTL(dev, (u32)&tx_ring[tx_cur], DownListPtr); + issue_and_wait(dev, DownUnstall); + for (i=0; !(ETH_STATUS(dev) & DownComplete); i++) + { + if (i >= TOUT_LOOP) + { + PRINTF("TX Ring status (Init): 0x%4x\n", le32_to_cpu(tx_ring[tx_cur].status)); + PRINTF("ETH_STATUS: 0x%x\n", ETH_STATUS(dev)); + goto Done; + } + } + if (ETH_STATUS(dev) & DownComplete) /* If DownLoad Complete ACK the bit */ + { + ETH_CMD(dev, AckIntr | DownComplete); /* acknowledge the indication bit */ + issue_and_wait(dev, DownStall); /* stall and clear DownListPtr */ + ETH_OUTL(dev, 0, DownListPtr); + issue_and_wait(dev, DownUnstall); + } + status = 1; + +Done: + return status; +} + +int eth_3com_send(struct eth_device* dev, volatile void *packet, int length) +{ + int i, status = 0; + int tx_cur; + + if (length <= 0) + { + PRINTF("eth: bad packet size: %d\n", length); + goto Done; + } + + tx_cur = tx_next; + tx_next = (tx_next+1) % NUM_TX_DESC; + + tx_ring[tx_cur].status = cpu_to_le32(1<<31); /* set DnIndicate bit */ + tx_ring[tx_cur].next = 0; + tx_ring[tx_cur].addr = cpu_to_le32(((u32) packet)); + tx_ring[tx_cur].length = cpu_to_le32(length | LAST_FRAG); + + /* Send the packet */ + + issue_and_wait(dev, DownStall); /* stall and set the DownListPtr */ + ETH_OUTL(dev, (u32) &tx_ring[tx_cur], DownListPtr); + issue_and_wait(dev, DownUnstall); + + for (i=0; !(ETH_STATUS(dev) & DownComplete); i++) + { + if (i >= TOUT_LOOP) + { + PRINTF("TX Ring status (send): 0x%4x\n", le32_to_cpu(tx_ring[tx_cur].status)); + goto Done; + } + } + if (ETH_STATUS(dev) & DownComplete) /* If DownLoad Complete ACK the bit */ + { + ETH_CMD(dev, AckIntr | DownComplete); /* acknowledge the indication bit */ + issue_and_wait(dev, DownStall); /* stall and clear DownListPtr */ + ETH_OUTL(dev, 0, DownListPtr); + issue_and_wait(dev, DownUnstall); + } + status=1; + Done: + return status; +} + +void PrintPacket (uchar *packet, int length) +{ +int loop; +uchar *ptr; + + printf ("Printing packet of length %x.\n\n", length); + ptr = packet; + for (loop = 1; loop <= length; loop++) + { + printf ("%2x ", *ptr++); + if ((loop % 40)== 0) + printf ("\n"); + } +} + +int eth_3com_recv(struct eth_device* dev) +{ + u16 stat = 0; + u32 status; + int rx_prev, length = 0; + + while (!(ETH_STATUS(dev) & UpComplete)) /* wait on receipt of packet */ + ; + + status = le32_to_cpu(rx_ring[rx_next].status); /* packet status */ + + while (status & (1<<15)) + { + /* A packet has been received */ + + if (status & (1<<15)) + { + /* A valid frame received */ + + length = le32_to_cpu(rx_ring[rx_next].status) & 0x1fff; /* length is in bits 0 - 12 */ + + /* Pass the packet up to the protocol layers */ + + NetReceive((uchar *)le32_to_cpu(rx_ring[rx_next].addr), length); + rx_ring[rx_next].status = 0; /* clear the status word */ + ETH_CMD(dev, AckIntr | UpComplete); + issue_and_wait(dev, UpUnstall); + } + else + if (stat & HostError) + { + /* There was an error */ + + printf("Rx error status: 0x%4x\n", stat); + init_rx_ring(dev); + goto Done; + } + + rx_prev = rx_next; + rx_next = (rx_next + 1) % NUM_RX_DESC; + stat = ETH_STATUS(dev); /* register status */ + status = le32_to_cpu(rx_ring[rx_next].status); /* packet status */ + } + +Done: + return length; +} + +void eth_3com_halt(struct eth_device* dev) +{ + if (!(dev->iobase)) + { + goto Done; + } + + issue_and_wait(dev, DownStall); /* shut down transmit and receive */ + issue_and_wait(dev, UpStall); + issue_and_wait(dev, RxDisable); + issue_and_wait(dev, TxDisable); + +// free(tx_ring); /* release memory allocated to the DPD and UPD rings */ +// free(rx_ring); + +Done: + return; +} + +static void init_rx_ring(struct eth_device* dev) +{ + int i; + + PRINTF("Initializing rx_ring. rx_buffer = %p\n", rx_buffer); + issue_and_wait(dev, UpStall); + + for (i = 0; i < NUM_RX_DESC; i++) + { + rx_ring[i].next = cpu_to_le32(((u32) &rx_ring[(i+1) % NUM_RX_DESC])); + rx_ring[i].status = 0; + rx_ring[i].addr = cpu_to_le32(((u32) &rx_buffer[i][0])); + rx_ring[i].length = cpu_to_le32(PKTSIZE_ALIGN | LAST_FRAG); + } + rx_next = 0; +} + +static void purge_tx_ring(struct eth_device* dev) +{ + int i; + + PRINTF("Purging tx_ring.\n"); + + tx_next = 0; + + for (i = 0; i < NUM_TX_DESC; i++) + { + tx_ring[i].next = 0; + tx_ring[i].status = 0; + tx_ring[i].addr = 0; + tx_ring[i].length = 0; + } +} + +static void read_hw_addr(struct eth_device* dev, bd_t *bis) +{ + u8 hw_addr[ETH_ALEN]; + unsigned int eeprom[0x40]; + unsigned int checksum = 0; + int i, j, timer; + + /* Read the station address from the EEPROM. */ + + EL3WINDOW(dev, 0); + for (i = 0; i < 0x40; i++) + { + ETH_OUTW(dev, EEPROM_Read + i, Wn0EepromCmd); + /* Pause for at least 162 us. for the read to take place. */ + for (timer = 10; timer >= 0; timer--) + { + udelay(162); + if ((ETH_INW(dev, Wn0EepromCmd) & 0x8000) == 0) + break; + } + eeprom[i] = ETH_INW(dev, Wn0EepromData); + } + + /* Checksum calculation. I'm not sure about this part and there seems to be a bug on the 3com side of things */ + + for (i = 0; i < 0x21; i++) + checksum ^= eeprom[i]; + checksum = (checksum ^ (checksum >> 8)) & 0xff; + + if (checksum != 0xbb) + printf(" *** INVALID EEPROM CHECKSUM %4.4x *** \n", checksum); + + for (i = 0, j = 0; i < 3; i++) + { + hw_addr[j++] = (u8)((eeprom[i+10] >> 8) & 0xff); + hw_addr[j++] = (u8)(eeprom[i+10] & 0xff); + } + + /* MAC Address is in window 2, write value from EEPROM to window 2 */ + + EL3WINDOW(dev, 2); + for (i = 0; i < 6; i++) + ETH_OUTB(dev, hw_addr[i], i); + + for (j = 0; j < ETH_ALEN; j+=2) + { + hw_addr[j] = (u8)(ETH_INW(dev, j) & 0xff); + hw_addr[j+1] = (u8)((ETH_INW(dev, j) >> 8) & 0xff); + } + + for (i=0;i<ETH_ALEN;i++) + { + if (hw_addr[i] != bis->bi_enetaddr[i]) + { +/* printf("Warning: HW address don't match:\n"); */ +/* printf("Address in 3Com Window 2 is " */ +/* "%02X:%02X:%02X:%02X:%02X:%02X\n", */ +/* hw_addr[0], hw_addr[1], hw_addr[2], */ +/* hw_addr[3], hw_addr[4], hw_addr[5]); */ +/* printf("Address used by U-Boot is " */ +/* "%02X:%02X:%02X:%02X:%02X:%02X\n", */ +/* bis->bi_enetaddr[0], bis->bi_enetaddr[1], */ +/* bis->bi_enetaddr[2], bis->bi_enetaddr[3], */ +/* bis->bi_enetaddr[4], bis->bi_enetaddr[5]); */ +/* goto Done; */ + char buffer[256]; + if (bis->bi_enetaddr[0] == 0 && bis->bi_enetaddr[1] == 0 && + bis->bi_enetaddr[2] == 0 && bis->bi_enetaddr[3] == 0 && + bis->bi_enetaddr[4] == 0 && bis->bi_enetaddr[5] == 0) + { + + sprintf(buffer, "%02X:%02X:%02X:%02X:%02X:%02X", + hw_addr[0], hw_addr[1], hw_addr[2], + hw_addr[3], hw_addr[4], hw_addr[5]); + setenv("ethaddr", buffer); + } + } + } + + for(i=0; i<ETH_ALEN; i++) dev->enetaddr[i] = hw_addr[i]; + +Done: + return; +} + diff --git a/board/MAI/AmigaOneG3SE/flash.c b/board/MAI/AmigaOneG3SE/flash.c new file mode 100644 index 00000000000..409b955fd59 --- /dev/null +++ b/board/MAI/AmigaOneG3SE/flash.c @@ -0,0 +1,35 @@ +#include <common.h> +#include <flash.h> + +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; + + +unsigned long flash_init(void) +{ + int i; + + for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) + { + flash_info[i].flash_id = FLASH_UNKNOWN; + flash_info[i].sector_count = 0; + flash_info[i].size = 0; + } + + + return 1; +} + +int flash_erase(flash_info_t *info, int s_first, int s_last) +{ + return 1; +} + +void flash_print_info(flash_info_t *info) +{ + printf("No flashrom installed\n"); +} + +int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) +{ + return 0; +} diff --git a/board/MAI/AmigaOneG3SE/flash_new.c b/board/MAI/AmigaOneG3SE/flash_new.c new file mode 100644 index 00000000000..6eebeba0f21 --- /dev/null +++ b/board/MAI/AmigaOneG3SE/flash_new.c @@ -0,0 +1,652 @@ +/* + * (C) Copyright 2001 + * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc. + * + * (C) Copyright 2002 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <flash.h> +#include <asm/io.h> +#include "memio.h" + +/*---------------------------------------------------------------------*/ +#undef DEBUG_FLASH +//#define DEBUG_FLASH + +#ifdef DEBUG_FLASH +#define DEBUGF(fmt,args...) printf(fmt ,##args) +#else +#define DEBUGF(fmt,args...) +#endif +/*---------------------------------------------------------------------*/ + +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; + +static ulong flash_get_size (ulong addr, flash_info_t *info); +static int flash_get_offsets (ulong base, flash_info_t *info); +static int write_word (flash_info_t *info, ulong dest, ulong data); +static void flash_reset (ulong addr); + +int flash_xd_nest; + +static void flash_to_xd(void) +{ + unsigned char x; + + flash_xd_nest ++; + + if (flash_xd_nest == 1) + { + DEBUGF("Flash on XD\n"); + x = pci_read_cfg_byte(0, 0, 0x74); + pci_write_cfg_byte(0, 0, 0x74, x|1); + } +} + +static void flash_to_mem(void) +{ + unsigned char x; + + flash_xd_nest --; + + if (flash_xd_nest == 0) + { + DEBUGF("Flash on memory bus\n"); + x = pci_read_cfg_byte(0, 0, 0x74); + pci_write_cfg_byte(0, 0, 0x74, x&0xFE); + } +} + +unsigned long flash_init_old(void) +{ + int i; + + for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) + { + flash_info[i].flash_id = FLASH_UNKNOWN; + flash_info[i].sector_count = 0; + flash_info[i].size = 0; + } + + + return 1; +} + +unsigned long flash_init (void) +{ + unsigned int i; + unsigned long flash_size = 0; + + flash_xd_nest = 0; + + flash_to_xd(); + + /* Init: no FLASHes known */ + for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) { + flash_info[i].flash_id = FLASH_UNKNOWN; + flash_info[i].sector_count = 0; + flash_info[i].size = 0; + } + + DEBUGF("\n## Get flash size @ 0x%08x\n", CFG_FLASH_BASE); + + flash_size = flash_get_size (CFG_FLASH_BASE, flash_info); + + DEBUGF("## Flash bank size: %08lx\n", flash_size); + + if (flash_size) { +#if CFG_MONITOR_BASE >= CFG_FLASH_BASE && \ + CFG_MONITOR_BASE < CFG_FLASH_BASE + CFG_FLASH_MAX_SIZE + /* monitor protection ON by default */ + flash_protect(FLAG_PROTECT_SET, + CFG_MONITOR_BASE, + CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1, + &flash_info[0]); +#endif + +#ifdef CFG_ENV_IS_IN_FLASH + /* ENV protection ON by default */ + flash_protect(FLAG_PROTECT_SET, + CFG_ENV_ADDR, + CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1, + &flash_info[0]); +#endif + + } else { + puts ("Warning: the BOOT Flash is not initialised !"); + } + + flash_to_mem(); + + return flash_size; +} + +/* + * The following code cannot be run from FLASH! + */ +static ulong flash_get_size (ulong addr, flash_info_t *info) +{ + short i; + uchar value; + uchar *x = (uchar *)addr; + + flash_to_xd(); + + /* Write auto select command: read Manufacturer ID */ + x[0x0555] = 0xAA; + __asm volatile ("sync\n eieio"); + x[0x02AA] = 0x55; + __asm volatile ("sync\n eieio"); + x[0x0555] = 0x90; + __asm volatile ("sync\n eieio"); + + value = x[0]; + __asm volatile ("sync\n eieio"); + + DEBUGF("Manuf. ID @ 0x%08lx: 0x%08x\n", (ulong)addr, value); + + switch (value | (value << 16)) { + case AMD_MANUFACT: + info->flash_id = FLASH_MAN_AMD; + break; + + case FUJ_MANUFACT: + info->flash_id = FLASH_MAN_FUJ; + break; + + case STM_MANUFACT: + info->flash_id = FLASH_MAN_STM; + break; + + default: + info->flash_id = FLASH_UNKNOWN; + info->sector_count = 0; + info->size = 0; + flash_reset (addr); + return 0; + } + + value = x[1]; + __asm volatile ("sync\n eieio"); + + DEBUGF("Device ID @ 0x%08lx: 0x%08x\n", addr+1, value); + + switch (value) { + case AMD_ID_F040B: + DEBUGF("Am29F040B\n"); + info->flash_id += FLASH_AM040; + info->sector_count = 8; + info->size = 0x00080000; + break; /* => 512 kB */ + + case AMD_ID_LV040B: + DEBUGF("Am29LV040B\n"); + info->flash_id += FLASH_AM040; + info->sector_count = 8; + info->size = 0x00080000; + break; /* => 512 kB */ + + case AMD_ID_LV400T: + DEBUGF("Am29LV400T\n"); + info->flash_id += FLASH_AM400T; + info->sector_count = 11; + info->size = 0x00100000; + break; /* => 1 MB */ + + case AMD_ID_LV400B: + DEBUGF("Am29LV400B\n"); + info->flash_id += FLASH_AM400B; + info->sector_count = 11; + info->size = 0x00100000; + break; /* => 1 MB */ + + case AMD_ID_LV800T: + DEBUGF("Am29LV800T\n"); + info->flash_id += FLASH_AM800T; + info->sector_count = 19; + info->size = 0x00200000; + break; /* => 2 MB */ + + case AMD_ID_LV800B: + DEBUGF("Am29LV400B\n"); + info->flash_id += FLASH_AM800B; + info->sector_count = 19; + info->size = 0x00200000; + break; /* => 2 MB */ + + case AMD_ID_LV160T: + DEBUGF("Am29LV160T\n"); + info->flash_id += FLASH_AM160T; + info->sector_count = 35; + info->size = 0x00400000; + break; /* => 4 MB */ + + case AMD_ID_LV160B: + DEBUGF("Am29LV160B\n"); + info->flash_id += FLASH_AM160B; + info->sector_count = 35; + info->size = 0x00400000; + break; /* => 4 MB */ + + case AMD_ID_LV320T: + DEBUGF("Am29LV320T\n"); + info->flash_id += FLASH_AM320T; + info->sector_count = 67; + info->size = 0x00800000; + break; /* => 8 MB */ + +#if 0 + /* Has the same ID as AMD_ID_LV320T, to be fixed */ + case AMD_ID_LV320B: + DEBUGF("Am29LV320B\n"); + info->flash_id += FLASH_AM320B; + info->sector_count = 67; + info->size = 0x00800000; + break; /* => 8 MB */ +#endif + + case AMD_ID_LV033C: + DEBUGF("Am29LV033C\n"); + info->flash_id += FLASH_AM033C; + info->sector_count = 64; + info->size = 0x01000000; + break; /* => 16Mb */ + + case STM_ID_F040B: + DEBUGF("M29F040B\n"); + info->flash_id += FLASH_AM040; + info->sector_count = 8; + info->size = 0x00080000; + break; /* => 512 kB */ + + default: + info->flash_id = FLASH_UNKNOWN; + flash_reset (addr); + flash_to_mem(); + return (0); /* => no or unknown flash */ + + } + + if (info->sector_count > CFG_MAX_FLASH_SECT) { + printf ("** ERROR: sector count %d > max (%d) **\n", + info->sector_count, CFG_MAX_FLASH_SECT); + info->sector_count = CFG_MAX_FLASH_SECT; + } + + if (! flash_get_offsets (addr, info)) { + flash_reset (addr); + flash_to_mem(); + return 0; + } + + /* check for protected sectors */ + for (i = 0; i < info->sector_count; i++) { + /* read sector protection at sector address, (A7 .. A0) = 0x02 */ + /* D0 = 1 if protected */ + value = in8(info->start[i] + 2); + iobarrier_rw(); + info->protect[i] = (value & 1) != 0; + } + + /* + * Reset bank to read mode + */ + flash_reset (addr); + + flash_to_mem(); + + return (info->size); +} + +static int flash_get_offsets (ulong base, flash_info_t *info) +{ + unsigned int i; + + switch (info->flash_id & FLASH_TYPEMASK) { + case FLASH_AM040: + /* set sector offsets for uniform sector type */ + for (i = 0; i < info->sector_count; i++) { + info->start[i] = base + i * info->size / + info->sector_count; + } + break; + default: + return 0; + } + + return 1; +} + +int flash_erase (flash_info_t *info, int s_first, int s_last) +{ + volatile ulong addr = info->start[0]; + int flag, prot, sect, l_sect; + ulong start, now, last; + + flash_to_xd(); + + if (s_first < 0 || s_first > s_last) { + if (info->flash_id == FLASH_UNKNOWN) { + printf ("- missing\n"); + } else { + printf ("- no sectors to erase\n"); + } + flash_to_mem(); + return 1; + } + + if (info->flash_id == FLASH_UNKNOWN) { + printf ("Can't erase unknown flash type %08lx - aborted\n", + info->flash_id); + flash_to_mem(); + return 1; + } + + prot = 0; + for (sect=s_first; sect<=s_last; ++sect) { + if (info->protect[sect]) { + prot++; + } + } + + if (prot) { + printf ("- Warning: %d protected sectors will not be erased!\n", + prot); + } else { + printf ("\n"); + } + + l_sect = -1; + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + out8(addr + 0x555, 0xAA); + iobarrier_rw(); + out8(addr + 0x2AA, 0x55); + iobarrier_rw(); + out8(addr + 0x555, 0x80); + iobarrier_rw(); + out8(addr + 0x555, 0xAA); + iobarrier_rw(); + out8(addr + 0x2AA, 0x55); + iobarrier_rw(); + + /* Start erase on unprotected sectors */ + for (sect = s_first; sect<=s_last; sect++) { + if (info->protect[sect] == 0) { /* not protected */ + addr = info->start[sect]; + out8(addr, 0x30); + iobarrier_rw(); + l_sect = sect; + } + } + + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + + /* wait at least 80us - let's wait 1 ms */ + udelay (1000); + + /* + * We wait for the last triggered sector + */ + if (l_sect < 0) + goto DONE; + + start = get_timer (0); + last = start; + addr = info->start[l_sect]; + + DEBUGF ("Start erase timeout: %d\n", CFG_FLASH_ERASE_TOUT); + + while ((in8(addr) & 0x80) != 0x80) { + if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) { + printf ("Timeout\n"); + flash_reset (info->start[0]); + flash_to_mem(); + return 1; + } + /* show that we're waiting */ + if ((now - last) > 1000) { /* every second */ + putc ('.'); + last = now; + } + iobarrier_rw(); + } + +DONE: + /* reset to read mode */ + flash_reset (info->start[0]); + flash_to_mem(); + + printf (" done\n"); + return 0; +} + +/* + * Copy memory to flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) +{ + ulong cp, wp, data; + int i, l, rc; + + flash_to_xd(); + + wp = (addr & ~3); /* get lower word aligned address */ + + /* + * handle unaligned start bytes + */ + if ((l = addr - wp) != 0) { + data = 0; + for (i=0, cp=wp; i<l; ++i, ++cp) { + data = (data << 8) | (*(uchar *)cp); + } + for (; i<4 && cnt>0; ++i) { + data = (data << 8) | *src++; + --cnt; + ++cp; + } + for (; cnt==0 && i<4; ++i, ++cp) { + data = (data << 8) | (*(uchar *)cp); + } + + if ((rc = write_word(info, wp, data)) != 0) { + flash_to_mem(); + return (rc); + } + wp += 4; + } + + /* + * handle word aligned part + */ + while (cnt >= 4) { + data = 0; + for (i=0; i<4; ++i) { + data = (data << 8) | *src++; + } + if ((rc = write_word(info, wp, data)) != 0) { + flash_to_mem(); + return (rc); + } + wp += 4; + cnt -= 4; + } + + if (cnt == 0) { + flash_to_mem(); + return (0); + } + + /* + * handle unaligned tail bytes + */ + data = 0; + for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { + data = (data << 8) | *src++; + --cnt; + } + for (; i<4; ++i, ++cp) { + data = (data << 8) | (*(uchar *)cp); + } + + + flash_to_mem(); + return (write_word(info, wp, data)); +} + +/* + * Write a word to Flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +static int write_word (flash_info_t *info, ulong dest, ulong data) +{ + volatile ulong addr = info->start[0]; + ulong start; + int i; + + flash_to_xd(); + + /* Check if Flash is (sufficiently) erased */ + if ((in32(dest) & data) != data) { + flash_to_mem(); + return (2); + } + + /* write each byte out */ + for (i = 0; i < 4; i++) { + char *data_ch = (char *)&data; + int flag = disable_interrupts(); + + out8(addr + 0x555, 0xAA); + iobarrier_rw(); + out8(addr + 0x2AA, 0x55); + iobarrier_rw(); + out8(addr + 0x555, 0xA0); + iobarrier_rw(); + out8(dest+i, data_ch[i]); + iobarrier_rw(); + + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + + /* data polling for D7 */ + start = get_timer (0); + while ((in8(dest+i) & 0x80) != (data_ch[i] & 0x80)) { + if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + flash_reset (addr); + flash_to_mem(); + return (1); + } + iobarrier_rw(); + } + } + + flash_reset (addr); + flash_to_mem(); + return (0); +} + +/* + * Reset bank to read mode + */ +static void flash_reset (ulong addr) +{ + flash_to_xd(); + out8(addr, 0xF0); /* reset bank */ + iobarrier_rw(); + flash_to_mem(); +} + +void flash_print_info (flash_info_t *info) +{ + int i; + + if (info->flash_id == FLASH_UNKNOWN) { + printf ("missing or unknown FLASH type\n"); + return; + } + + switch (info->flash_id & FLASH_VENDMASK) { + case FLASH_MAN_AMD: printf ("AMD "); break; + case FLASH_MAN_FUJ: printf ("FUJITSU "); break; + case FLASH_MAN_BM: printf ("BRIGHT MICRO "); break; + case FLASH_MAN_STM: printf ("SGS THOMSON "); break; + default: printf ("Unknown Vendor "); break; + } + + switch (info->flash_id & FLASH_TYPEMASK) { + case FLASH_AM040: printf ("29F040 or 29LV040 (4 Mbit, uniform sectors)\n"); + break; + case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n"); + break; + case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n"); + break; + case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n"); + break; + case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n"); + break; + case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n"); + break; + case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n"); + break; + case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n"); + break; + case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n"); + break; + default: printf ("Unknown Chip Type\n"); + break; + } + + if (info->size % 0x100000 == 0) { + printf (" Size: %ld MB in %d Sectors\n", + info->size / 0x100000, info->sector_count); + } else if (info->size % 0x400 == 0) { + printf (" Size: %ld KB in %d Sectors\n", + info->size / 0x400, info->sector_count); + } else { + printf (" Size: %ld B in %d Sectors\n", + info->size, info->sector_count); + } + + printf (" Sector Start Addresses:"); + for (i=0; i<info->sector_count; ++i) { + if ((i % 5) == 0) + printf ("\n "); + printf (" %08lX%s", + info->start[i], + info->protect[i] ? " (RO)" : " " + ); + } + printf ("\n"); +} diff --git a/board/MAI/AmigaOneG3SE/i8259.c b/board/MAI/AmigaOneG3SE/i8259.c new file mode 100644 index 00000000000..6cdfc60da40 --- /dev/null +++ b/board/MAI/AmigaOneG3SE/i8259.c @@ -0,0 +1,230 @@ +/* + * (C) Copyright 2002 + * John W. Linville, linville@tuxdriver.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include "i8259.h" + +#undef IRQ_DEBUG + +#ifdef IRQ_DEBUG +#define PRINTF(fmt,args...) printf (fmt ,##args) +#else +#define PRINTF(fmt,args...) +#endif + +static inline unsigned char read_byte(volatile unsigned char* from) +{ + int x; + asm volatile ("lbz %0,%1\n eieio" : "=r" (x) : "m" (*from)); + return (unsigned char)x; +} + +static inline void write_byte(volatile unsigned char *to, int x) +{ + asm volatile ("stb %1,%0\n eieio" : "=m" (*to) : "r" (x)); +} + +static inline unsigned long read_long_little(volatile unsigned long *from) +{ + unsigned long x; + asm volatile ("lwbrx %0,0,%1\n eieio\n sync" : "=r" (x) : "r" (from), "m"(*from)); + return (unsigned long)x; +} + +#ifdef out8 +#undef out8 +#endif + +#ifdef in8 +#undef in8 +#endif + +#define out8(addr, byte) write_byte(0xFE000000 | addr, byte) +#define in8(addr) read_byte(0xFE000000 | addr) + +/* + * This contains the irq mask for both 8259A irq controllers, + */ +static char cached_imr[2] = {0xff, 0xff}; + +#define cached_imr1 (cached_imr[0]) +#define cached_imr2 (cached_imr[1]) + +void i8259_init(void) +{ + char dummy; + PRINTF("Initializing Interrupt controller\n"); + /* init master interrupt controller */ + out8(0x20, 0x11); //0x19); // was: 0x11); /* Start init sequence */ + out8(0x21, 0x00); /* Vector base */ + out8(0x21, 0x04); /* edge tiggered, Cascade (slave) on IRQ2 */ + out8(0x21, 0x11); // was: 0x01); /* Select 8086 mode */ + + /* init slave interrupt controller */ + out8(0xA0, 0x11); //0x19); // was: 0x11); /* Start init sequence */ + out8(0xA1, 0x08); /* Vector base */ + out8(0xA1, 0x02); /* edge triggered, Cascade (slave) on IRQ2 */ + out8(0xA1, 0x11); // was: 0x01); /* Select 8086 mode */ + + /* always read ISR */ + out8(0x20, 0x0B); + dummy = in8(ISR_1); + out8(0xA0, 0x0B); + dummy = in8(ISR_2); + +/* out8(0x43, 0x30); */ +/* out8(0x40, 0); */ +/* out8(0x40, 0); */ +/* out8(0x43, 0x70); */ +/* out8(0x41, 0); */ +/* out8(0x41, 0); */ +/* out8(0x43, 0xb0); */ +/* out8(0x42, 0); */ +/* out8(0x42, 0); */ + + /* Mask all interrupts */ + out8(IMR_2, cached_imr2); + out8(IMR_1, cached_imr1); + + i8259_unmask_irq(2); +#if 0 + { + int i; + for (i=0; i<16; i++) + { + i8259_unmask_irq(i); + } + } +#endif +} + +static volatile char *pci_intack = (void *)0xFEF00000; + +int i8259_irq(void) +{ + int irq; + + irq = read_long_little(pci_intack) & 0xff; + if (irq==7) { + /* + * This may be a spurious interrupt. + * + * Read the interrupt status register (ISR). If the most + * significant bit is not set then there is no valid + * interrupt. + */ + if(~in8(0x20)&0x80) { + irq = -1; + } + } + + return irq; +} +int i8259_get_irq(struct pt_regs *regs) +{ + unsigned char irq; + + /* + * Perform an interrupt acknowledge cycle on controller 1 + */ + out8(OCW3_1, 0x0C); /* prepare for poll */ + irq = in8(IPL_1) & 7; + if (irq == 2) { + /* + * Interrupt is cascaded so perform interrupt + * acknowledge on controller 2 + */ + out8(OCW3_2, 0x0C); /* prepare for poll */ + irq = (in8(IPL_2) & 7) + 8; + if (irq == 15) { + /* + * This may be a spurious interrupt + * + * Read the interrupt status register. If the most + * significant bit is not set then there is no valid + * interrupt + */ + out8(OCW3_2, 0x0b); + if (~(in8(ISR_2) & 0x80)) { + return -1; + } + } + } else if (irq == 7) { + /* + * This may be a spurious interrupt + * + * Read the interrupt status register. If the most + * significant bit is not set then there is no valid + * interrupt + */ + out8(OCW3_1, 0x0b); + if (~(in8(ISR_1) & 0x80)) { + return -1; + } + } + return irq; +} + +/* + * Careful! The 8259A is a fragile beast, it pretty + * much _has_ to be done exactly like this (mask it + * first, _then_ send the EOI, and the order of EOI + * to the two 8259s is important! + */ +void i8259_mask_and_ack(int irq) +{ + if (irq > 7) { + cached_imr2 |= (1 << (irq - 8)); + in8(IMR_2); /* DUMMY */ + out8(IMR_2, cached_imr2); + out8(OCW2_2, 0x20); /* Non-specific EOI */ + out8(OCW2_1, 0x20); /* Non-specific EOI to cascade */ + } else { + cached_imr1 |= (1 << irq); + in8(IMR_1); /* DUMMY */ + out8(IMR_1, cached_imr1); + out8(OCW2_1, 0x20); /* Non-specific EOI */ + } +} + +void i8259_mask_irq(int irq) +{ + if (irq & 8) { + cached_imr2 |= (1 << (irq & 7)); + out8(IMR_2, cached_imr2); + } else { + cached_imr1 |= (1 << irq); + out8(IMR_1, cached_imr1); + } +} + +void i8259_unmask_irq(int irq) +{ + if (irq & 8) { + cached_imr2 &= ~(1 << (irq & 7)); + out8(IMR_2, cached_imr2); + } else { + cached_imr1 &= ~(1 << irq); + out8(IMR_1, cached_imr1); + } +} diff --git a/board/MAI/AmigaOneG3SE/i8259.h b/board/MAI/AmigaOneG3SE/i8259.h new file mode 100644 index 00000000000..05c40522d1f --- /dev/null +++ b/board/MAI/AmigaOneG3SE/i8259.h @@ -0,0 +1,56 @@ +/* + * (C) Copyright 2002 + * John W. Linville, linville@tuxdriver.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#define ICW1_1 CFG_ISA_IO_BASE_ADDRESS + ISA_INT1_ICW1 +#define ICW1_2 CFG_ISA_IO_BASE_ADDRESS + ISA_INT2_ICW1 +#define ICW2_1 CFG_ISA_IO_BASE_ADDRESS + ISA_INT1_ICW2 +#define ICW2_2 CFG_ISA_IO_BASE_ADDRESS + ISA_INT2_ICW2 +#define ICW3_1 CFG_ISA_IO_BASE_ADDRESS + ISA_INT1_ICW3 +#define ICW3_2 CFG_ISA_IO_BASE_ADDRESS + ISA_INT2_ICW3 +#define ICW4_1 CFG_ISA_IO_BASE_ADDRESS + ISA_INT1_ICW4 +#define ICW4_2 CFG_ISA_IO_BASE_ADDRESS + ISA_INT2_ICW4 +#define OCW1_1 CFG_ISA_IO_BASE_ADDRESS + ISA_INT1_OCW1 +#define OCW1_2 CFG_ISA_IO_BASE_ADDRESS + ISA_INT2_OCW1 +#define OCW2_1 CFG_ISA_IO_BASE_ADDRESS + ISA_INT1_OCW2 +#define OCW2_2 CFG_ISA_IO_BASE_ADDRESS + ISA_INT2_OCW2 +#define OCW3_1 CFG_ISA_IO_BASE_ADDRESS + ISA_INT1_OCW3 +#define OCW3_2 CFG_ISA_IO_BASE_ADDRESS + ISA_INT2_OCW3 + +#define IMR_1 OCW1_1 +#define IMR_2 OCW1_2 + +#define ISR_1 ICW1_1 +#define ISR_2 ICW1_2 + +#define IPL_1 ICW1_1 +#define IPL_2 ICW1_2 + +extern void i8259_init(void); + +extern int i8259_get_irq(struct pt_regs *regs); + +extern void i8259_mask_and_ack(int irq); + +extern void i8259_mask_irq(int irq); + +extern void i8259_unmask_irq(int irq); diff --git a/board/MAI/AmigaOneG3SE/interrupts.c b/board/MAI/AmigaOneG3SE/interrupts.c new file mode 100644 index 00000000000..bb93ea02839 --- /dev/null +++ b/board/MAI/AmigaOneG3SE/interrupts.c @@ -0,0 +1,268 @@ +/* + * (C) Copyright 2002 + * John W. Linville <linville@tuxdriver.com> + * + * Copied and modified from original code by Josh Huber. Original + * copyright notice preserved below. + * + * (C) Copyright 2001 + * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * interrupts.c - just enough support for the decrementer/timer + */ + +#include <common.h> +#include <asm/processor.h> +#include <command.h> +#include "i8259.h" + +#undef DEBUG +#ifdef DEBUG +#define PRINTF(fmt,args...) printf (fmt ,##args) +#else +#define PRINTF(fmt,args...) +#endif +#define NR_IRQS 16 + +void irq_alloc_init(void); +long irq_alloc(long wanted); + +/****************************************************************************/ + +unsigned decrementer_count; /* count value for 1e6/HZ microseconds */ + +struct irq_action { + interrupt_handler_t *handler; + void *arg; + ulong count; +}; + +static struct irq_action irq_handlers[NR_IRQS]; + +/****************************************************************************/ + +static __inline__ unsigned long +get_msr(void) +{ + unsigned long msr; + + asm volatile("mfmsr %0" : "=r" (msr) :); + return msr; +} + +static __inline__ void +set_msr(unsigned long msr) +{ + asm volatile("mtmsr %0" : : "r" (msr)); +} + +static __inline__ unsigned long +get_dec(void) +{ + unsigned long val; + + asm volatile("mfdec %0" : "=r" (val) :); + return val; +} + + +static __inline__ void +set_dec(unsigned long val) +{ + asm volatile("mtdec %0" : : "r" (val)); +} + + +void +enable_interrupts(void) +{ + set_msr (get_msr() | MSR_EE); +} + +/* returns flag if MSR_EE was set before */ +int +disable_interrupts(void) +{ + ulong msr; + + msr = get_msr(); + set_msr (msr & ~MSR_EE); + return ((msr & MSR_EE) != 0); +} + +/****************************************************************************/ + +int interrupt_init (void) +{ + extern void new_reset(void); + extern void new_reset_end(void); +#ifdef DEBUG + puts("interrupt_init: setting decrementer_count\n"); +#endif + decrementer_count = get_tbclk() / CFG_HZ; + +#ifdef DEBUG + puts("interrupt_init: setting actual decremter\n"); +#endif + set_dec (get_tbclk() / CFG_HZ); + +#ifdef DEBUG + puts("interrupt_init: clearing external interrupt table\n"); +#endif + /* clear external interrupt table here */ + memset(irq_handlers, 0, sizeof(irq_handlers)); + +#ifdef DEBUG + puts("interrupt_init: initializing interrupt controller\n"); +#endif + i8259_init(); + +#ifdef DEBUG + puts("Copying reset trampoline\n"); +#endif + /* WARNING: Assmues that the first megabyte is CACHEINHIBIT! */ + memcpy((void *)0x100, new_reset, new_reset_end - new_reset); + +#ifdef DEBUG + PRINTF("interrupt_init: enabling interrupts (msr = %08x)\n", + get_msr()); +#endif + set_msr (get_msr() | MSR_EE); + +#ifdef DEBUG + PRINTF("interrupt_init: done. (msr = %08x)\n", get_msr()); +#endif + +} + +/****************************************************************************/ + +/* + * Handle external interrupts + */ +void +external_interrupt(struct pt_regs *regs) +{ + extern int i8259_irq(void); + + int irq, unmask = 1; + + irq = i8259_irq(); //i8259_get_irq(regs); +// printf("irq = %d, handler at %p ack=%d\n", irq, irq_handlers[irq].handler, *(volatile unsigned char *)0xFEF00000); + i8259_mask_and_ack(irq); + + if (irq_handlers[irq].handler != NULL) + (*irq_handlers[irq].handler)(irq_handlers[irq].arg); + else { + PRINTF ("\nBogus External Interrupt IRQ %d\n", irq); + /* + * turn off the bogus interrupt, otherwise it + * might repeat forever + */ + unmask = 0; + } + + if (unmask) i8259_unmask_irq(irq); +} + +volatile ulong timestamp = 0; + +/* + * timer_interrupt - gets called when the decrementer overflows, + * with interrupts disabled. + * Trivial implementation - no need to be really accurate. + */ +void +timer_interrupt(struct pt_regs *regs) +{ + set_dec(decrementer_count); + timestamp++; +} + +/****************************************************************************/ + +void +reset_timer(void) +{ + timestamp = 0; +} + +ulong +get_timer(ulong base) +{ + return (timestamp - base); +} + +void +set_timer(ulong t) +{ + timestamp = t; +} + +/****************************************************************************/ + +/* + * Install and free a interrupt handler. + */ + +void +irq_install_handler(int irq, interrupt_handler_t *handler, void *arg) +{ + if (irq < 0 || irq >= NR_IRQS) { + PRINTF("irq_install_handler: bad irq number %d\n", irq); + return; + } + + if (irq_handlers[irq].handler != NULL) + PRINTF("irq_install_handler: 0x%08lx replacing 0x%08lx\n", + (ulong)handler, (ulong)irq_handlers[irq].handler); + + irq_handlers[irq].handler = handler; + irq_handlers[irq].arg = arg; + + i8259_unmask_irq(irq); +} + +void +irq_free_handler(int irq) +{ + if (irq < 0 || irq >= NR_IRQS) { + PRINTF("irq_free_handler: bad irq number %d\n", irq); + return; + } + + i8259_mask_irq(irq); + + irq_handlers[irq].handler = NULL; + irq_handlers[irq].arg = NULL; +} + +/****************************************************************************/ + +void +do_irqinfo(cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) +{ + puts("IRQ related functions are unimplemented currently.\n"); +} + + diff --git a/board/MAI/AmigaOneG3SE/macros.h b/board/MAI/AmigaOneG3SE/macros.h new file mode 100644 index 00000000000..0fbe39b3ba8 --- /dev/null +++ b/board/MAI/AmigaOneG3SE/macros.h @@ -0,0 +1,84 @@ + +#ifndef _MACROS_H +#define _MACROS_H + + /* + ** Load a long integer into a register + */ + .macro liw reg, value + lis \reg, \value@h + ori \reg, \reg, \value@l + .endm + + + /* + ** Generate config_addr request + ** This macro expects the values in registers: + ** r3 - bus + ** r4 - devfn + ** r5 - offset + */ + .macro config_addr + rlwinm r9, r5, 24, 0, 6 + rlwinm r8, r4, 16, 0, 31 + rlwinm r7, r3, 8, 0, 31 + or r9, r8, r9 + or r9, r7, r9 + ori r9, r9, 0x80 + liw r10, 0xfec00cf8 + stw r9, 0(r10) + eieio + sync + .endm + + + /* + ** Generate config_data address + */ + .macro config_data mask + andi. r9, r5, \mask + addi r9, r9, 0xcfc + oris r9, r9, 0xfee0 + .endm + + + /* + ** Write a byte value to an output port + */ + .macro outb port, value + lis r2, 0xfe00 + li r0, \value + stb r0, \port(r2) + .endm + + + /* + ** Write a register byte value to an output port + */ + .macro outbr port, value + lis r2, 0xfe00 + stb \value, \port(r2) + .endm + + + /* + ** Read a byte value from a port into a specified register + */ + .macro inb reg, port + lis r2, 0xfe00 + lbz \reg, \port(r2) + .endm + + + /* + ** Write a byte to the SuperIO config area + */ + .macro siowb offset, value + li r3, 0 + li r4, (7<<3) + li r5, \offset + li r6, \value + bl pci_write_cfg_byte + .endm + +#endif diff --git a/board/MAI/AmigaOneG3SE/memio.S b/board/MAI/AmigaOneG3SE/memio.S new file mode 100644 index 00000000000..c4a09aab101 --- /dev/null +++ b/board/MAI/AmigaOneG3SE/memio.S @@ -0,0 +1,74 @@ +#include "macros.h" + + + + .globl pci_read_cfg_byte + +pci_read_cfg_byte: + config_addr + config_data 3 + eieio + sync + lbz r3, 0(r9) + blr + + + + .globl pci_write_cfg_byte + +pci_write_cfg_byte: + config_addr + config_data 3 + stb r6, 0(r9) + eieio + sync + blr + + + + .globl pci_read_cfg_word + +pci_read_cfg_word: + config_addr + config_data 2 + lhbrx r3, 0, r9 + eieio + sync + blr + + + + .globl pci_write_cfg_word + +pci_write_cfg_word: + config_addr + config_data 2 + sthbrx r6, 0, r9 + eieio + sync + blr + + + + .globl pci_read_cfg_long + +pci_read_cfg_long: + config_addr + config_data 0 + lwbrx r3, 0, r9 + eieio + sync + blr + + + + .globl pci_write_cfg_long + +pci_write_cfg_long: + config_addr + config_data 0 + stwbrx r6, 0, r9 + eieio + sync + blr + diff --git a/board/MAI/AmigaOneG3SE/memio.h b/board/MAI/AmigaOneG3SE/memio.h new file mode 100644 index 00000000000..df0839f91dc --- /dev/null +++ b/board/MAI/AmigaOneG3SE/memio.h @@ -0,0 +1,113 @@ +/* + * Memory mapped IO + * + * (C) Copyright 2002 + * Hyperion Entertainment, ThomasF@hyperion-entertainment.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * You may also use this under a BSD license. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * + */ + +#ifndef _MEMIO_H +#define _MEMIO_H + +#include "short_types.h" + +#define IOBASE 0xFE000000 + +#define in_byte(from) read_byte( (uint8 *)(IOBASE | (from))) +#define in_word(from) read_word_little((uint16 *)(IOBASE | (from))) +#define in_long(from) read_long_little((uint32 *)(IOBASE | (from))) +#define out_byte(to, val) write_byte((uint8 *)(IOBASE | (to)), val) +#define out_word(to, val) write_word_little((uint16 *)(IOBASE | (to)), val) +#define out_long(to, val) write_long_little((uint32 *)(IOBASE | (to)), val) + + +static inline uint8 read_byte(volatile uint8 *from) +{ + int x; + asm volatile ("lbz %0,%1\n eieio\n sync" : "=r" (x) : "m" (*from)); + return (uint8)x; +} + + +static inline void write_byte(volatile uint8 *to, uint8 x) +{ + asm volatile ("stb %1,%0\n eieio\n sync" : "=m" (*to) : "r" (x)); +} + +static inline uint16 read_word_little(volatile uint16 *from) +{ + int x; + asm volatile ("lhbrx %0,0,%1\n eieio\n sync" : "=r" (x) : "r" (from), "m" (*from)); + return (uint16)x; +} + +static inline uint16 read_word_big(volatile uint16 *from) +{ + int x; + asm volatile ("lhz %0,%1\n eieio\n sync" : "=r" (x) : "m" (*from)); + return (uint16)x; +} + +static inline void write_word_little(volatile uint16 *to, int x) +{ + asm volatile ("sthbrx %1,0,%2\n eieio\n sync" : "=m" (*to) : "r" (x), "r" (to)); +} + +static inline void write_word_big(volatile uint16 *to, int x) +{ + asm volatile ("sth %1,%0\n eieio\n sync" : "=m" (*to) : "r" (x)); +} + +static inline uint32 read_long_little(volatile uint32 *from) +{ + unsigned long x; + asm volatile ("lwbrx %0,0,%1\n eieio\n sync" : "=r" (x) : "r" (from), "m"(*from)); + return (uint32)x; +} + +static inline uint32 read_long_big(volatile uint32 *from) +{ + unsigned long x; + asm volatile ("lwz %0,%1\n eieio\n sync" : "=r" (x) : "m" (*from)); + return (uint32)x; +} + +static inline void write_long_little(volatile uint32 *to, uint32 x) +{ + asm volatile ("stwbrx %1,0,%2\n eieio\n sync" : "=m" (*to) : "r" (x), "r" (to)); +} + +static inline void write_long_big(volatile uint32 *to, uint32 x) +{ + asm volatile ("stw %1,%0\n eieio\n sync" : "=m" (*to) : "r" (x)); +} + +#define CONFIG_ADDR(bus, devfn, offset) \ + write_long_big((uint32 *)0xFEC00CF8, \ + ((offset & 0xFC)<<24) | (devfn << 16) \ + | (bus<<8) | 0x80); +#define CONFIG_DATA(offset,mask) ((void *)(0xFEE00CFC+(offset & mask))) + + +uint8 pci_read_cfg_byte(int32 bus, int32 devfn, int32 offset); +void pci_write_cfg_byte(int32 bus, int32 devfn, int32 offset, uint8 x); +uint16 pci_read_cfg_word(int32 bus, int32 devfn, int32 offset); +void pci_write_cfg_word(int32 bus, int32 devfn, int32 offset, uint16 x); +uint32 pci_read_cfg_long(int32 bus, int32 devfn, int32 offset); +void pci_write_cfg_long(int32 bus, int32 devfn, int32 offset, uint32 x); + + +#endif diff --git a/board/MAI/AmigaOneG3SE/memory_dump b/board/MAI/AmigaOneG3SE/memory_dump new file mode 100644 index 00000000000..65e79362a6d --- /dev/null +++ b/board/MAI/AmigaOneG3SE/memory_dump @@ -0,0 +1,30 @@ +64 MB: +0x00: 80 08 04 0c 09 01 40 00 01 a0 60 00 80 08 00 01 +0x10: 8f 04 04 01 01 00 06 a0 60 00 00 14 10 14 2d 10 +0x20: 20 10 20 10 00 00 00 00 00 00 00 00 00 00 00 00 +0x30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 12 f2 +0x40: 7f 61 00 00 00 00 00 00 46 04 00 ff ff ff ff ff +0x50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff +0x60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff +0x70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff 64 f4 + +512 MB: +0x00: 80 08 04 0d 0a 02 40 00 01 75 54 00 82 08 00 01 +0x10: 8f 04 04 01 01 00 0f 00 00 00 00 14 0f 14 2d 40 +0x20: 15 08 15 08 00 00 00 00 00 00 00 00 00 00 00 00 +0x30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 12 d2 +0x40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +0x50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +0x60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +0x70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 64 fd + +256 MB: +0x00: 80 08 04 0c 0a 02 40 00 01 75 54 00 80 08 00 01 +0x10: 8f 04 06 01 01 00 0e a0 60 00 00 14 0f 14 2d 20 +0x20: 15 08 15 08 00 00 00 00 00 00 00 00 00 00 00 00 +0x30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 12 b0 +0x40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +0x50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +0x60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +0x70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 64 f6 + diff --git a/board/MAI/AmigaOneG3SE/nvram.c b/board/MAI/AmigaOneG3SE/nvram.c new file mode 100644 index 00000000000..5dde15b6a75 --- /dev/null +++ b/board/MAI/AmigaOneG3SE/nvram.c @@ -0,0 +1,37 @@ +/* + * (C) Copyright 2002 + * Thomas Frieden, Hyperion Entertainment + * ThomasF@hyperion-entertainment.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include "memio.h" + +void enable_nvram(void) +{ + pci_write_cfg_byte(0, 0, 0x56, 0x0b); +} + +void disable_nvram(void) +{ + pci_write_cfg_byte(0, 0, 0x56, 0x0); +} + diff --git a/board/MAI/AmigaOneG3SE/ps2kbd.c b/board/MAI/AmigaOneG3SE/ps2kbd.c new file mode 100644 index 00000000000..a6d67beecd9 --- /dev/null +++ b/board/MAI/AmigaOneG3SE/ps2kbd.c @@ -0,0 +1,699 @@ +/* + * (C) Copyright 2002 + * John W. Linville, linville@tuxdriver.com + * + * Modified from code for support of MIP405 and PIP405 boards. Previous + * copyright follows. + * + * (C) Copyright 2001 + * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * + * Source partly derived from: + * linux/drivers/char/pc_keyb.c + * + * + */ +#include <common.h> +#include <asm/processor.h> +#include <devices.h> +#include "ps2kbd.h" + + +unsigned char kbd_read_status(void); +unsigned char kbd_read_input(void); +void kbd_send_data(unsigned char data); +void i8259_mask_irq(unsigned int irq); +void i8259_unmask_irq(unsigned int irq); + +/* used only by send_data - set by keyboard_interrupt */ + + +#undef KBG_DEBUG +//#define KBG_DEBUG + +#ifdef KBG_DEBUG +#define PRINTF(fmt,args...) printf (fmt ,##args) +#else +#define PRINTF(fmt,args...) +#endif + +#define KBD_STAT_KOBF 0x01 +#define KBD_STAT_IBF 0x02 +#define KBD_STAT_SYS 0x04 +#define KBD_STAT_CD 0x08 +#define KBD_STAT_LOCK 0x10 +#define KBD_STAT_MOBF 0x20 +#define KBD_STAT_TI_OUT 0x40 +#define KBD_STAT_PARERR 0x80 + +#define KBD_INIT_TIMEOUT 2000 /* Timeout in ms for initializing the keyboard */ +#define KBC_TIMEOUT 250 /* Timeout in ms for sending to keyboard controller */ +#define KBD_TIMEOUT 2000 /* Timeout in ms for keyboard command acknowledge */ +/* + * Keyboard Controller Commands + */ + +#define KBD_CCMD_READ_MODE 0x20 /* Read mode bits */ +#define KBD_CCMD_WRITE_MODE 0x60 /* Write mode bits */ +#define KBD_CCMD_GET_VERSION 0xA1 /* Get controller version */ +#define KBD_CCMD_MOUSE_DISABLE 0xA7 /* Disable mouse interface */ +#define KBD_CCMD_MOUSE_ENABLE 0xA8 /* Enable mouse interface */ +#define KBD_CCMD_TEST_MOUSE 0xA9 /* Mouse interface test */ +#define KBD_CCMD_SELF_TEST 0xAA /* Controller self test */ +#define KBD_CCMD_KBD_TEST 0xAB /* Keyboard interface test */ +#define KBD_CCMD_KBD_DISABLE 0xAD /* Keyboard interface disable */ +#define KBD_CCMD_KBD_ENABLE 0xAE /* Keyboard interface enable */ +#define KBD_CCMD_WRITE_AUX_OBUF 0xD3 /* Write to output buffer as if + initiated by the auxiliary device */ +#define KBD_CCMD_WRITE_MOUSE 0xD4 /* Write the following byte to the mouse */ + +/* + * Keyboard Commands + */ + +#define KBD_CMD_SET_LEDS 0xED /* Set keyboard leds */ +#define KBD_CMD_SET_RATE 0xF3 /* Set typematic rate */ +#define KBD_CMD_ENABLE 0xF4 /* Enable scanning */ +#define KBD_CMD_DISABLE 0xF5 /* Disable scanning */ +#define KBD_CMD_RESET 0xFF /* Reset */ + +/* + * Keyboard Replies + */ + +#define KBD_REPLY_POR 0xAA /* Power on reset */ +#define KBD_REPLY_ACK 0xFA /* Command ACK */ +#define KBD_REPLY_RESEND 0xFE /* Command NACK, send the cmd again */ + +/* + * Status Register Bits + */ + +#define KBD_STAT_OBF 0x01 /* Keyboard output buffer full */ +#define KBD_STAT_IBF 0x02 /* Keyboard input buffer full */ +#define KBD_STAT_SELFTEST 0x04 /* Self test successful */ +#define KBD_STAT_CMD 0x08 /* Last write was a command write (0=data) */ +#define KBD_STAT_UNLOCKED 0x10 /* Zero if keyboard locked */ +#define KBD_STAT_MOUSE_OBF 0x20 /* Mouse output buffer full */ +#define KBD_STAT_GTO 0x40 /* General receive/xmit timeout */ +#define KBD_STAT_PERR 0x80 /* Parity error */ + +#define AUX_STAT_OBF (KBD_STAT_OBF | KBD_STAT_MOUSE_OBF) + +/* + * Controller Mode Register Bits + */ + +#define KBD_MODE_KBD_INT 0x01 /* Keyboard data generate IRQ1 */ +#define KBD_MODE_MOUSE_INT 0x02 /* Mouse data generate IRQ12 */ +#define KBD_MODE_SYS 0x04 /* The system flag (?) */ +#define KBD_MODE_NO_KEYLOCK 0x08 /* The keylock doesn't affect the keyboard if set */ +#define KBD_MODE_DISABLE_KBD 0x10 /* Disable keyboard interface */ +#define KBD_MODE_DISABLE_MOUSE 0x20 /* Disable mouse interface */ +#define KBD_MODE_KCC 0x40 /* Scan code conversion to PC format */ +#define KBD_MODE_RFU 0x80 + + +#define KDB_DATA_PORT 0x60 +#define KDB_COMMAND_PORT 0x64 + +#define LED_SCR 0x01 /* scroll lock led */ +#define LED_CAP 0x04 /* caps lock led */ +#define LED_NUM 0x02 /* num lock led */ + +#define KBD_BUFFER_LEN 0x20 /* size of the keyboardbuffer */ + + + + +static volatile char kbd_buffer[KBD_BUFFER_LEN]; +static volatile int in_pointer = 0; +static volatile int out_pointer = 0; + + +static unsigned char num_lock = 0; +static unsigned char caps_lock = 0; +static unsigned char scroll_lock = 0; +static unsigned char shift = 0; +static unsigned char ctrl = 0; +static unsigned char alt = 0; +static unsigned char e0 = 0; +static unsigned char leds = 0; + +#define DEVNAME "ps2kbd" + +/* Simple translation table for the keys */ + +static unsigned char kbd_plain_xlate[] = { + 0xff,0x1b, '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', '-', '=','\b','\t', /* 0x00 - 0x0f */ + 'q', 'w', 'e', 'r', 't', 'y', 'u', 'i', 'o', 'p', '[', ']','\r',0xff, 'a', 's', /* 0x10 - 0x1f */ + 'd', 'f', 'g', 'h', 'j', 'k', 'l', ';','\'', '`',0xff,'\\', 'z', 'x', 'c', 'v', /* 0x20 - 0x2f */ + 'b', 'n', 'm', ',', '.', '/',0xff,0xff,0xff, ' ',0xff,0xff,0xff,0xff,0xff,0xff, /* 0x30 - 0x3f */ + 0xff,0xff,0xff,0xff,0xff,0xff,0xff, '7', '8', '9', '-', '4', '5', '6', '+', '1', /* 0x40 - 0x4f */ + '2', '3', '0', '.',0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 0x50 - 0x5F */ + '\r',0xff,0xff + }; + +static unsigned char kbd_shift_xlate[] = { + 0xff,0x1b, '!', '@', '#', '$', '%', '^', '&', '*', '(', ')', '_', '+','\b','\t', /* 0x00 - 0x0f */ + 'Q', 'W', 'E', 'R', 'T', 'Y', 'U', 'I', 'O', 'P', '{', '}','\r',0xff, 'A', 'S', /* 0x10 - 0x1f */ + 'D', 'F', 'G', 'H', 'J', 'K', 'L', ':', '"', '~',0xff, '|', 'Z', 'X', 'C', 'V', /* 0x20 - 0x2f */ + 'B', 'N', 'M', '<', '>', '?',0xff,0xff,0xff, ' ',0xff,0xff,0xff,0xff,0xff,0xff, /* 0x30 - 0x3f */ + 0xff,0xff,0xff,0xff,0xff,0xff,0xff, '7', '8', '9', '-', '4', '5', '6', '+', '1', /* 0x40 - 0x4f */ + '2', '3', '0', '.',0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 0x50 - 0x5F */ + '\r',0xff,0xff + }; + +static unsigned char kbd_ctrl_xlate[] = { + 0xff,0x1b, '1',0x00, '3', '4', '5',0x1E, '7', '8', '9', '0',0x1F, '=','\b','\t', /* 0x00 - 0x0f */ + 0x11,0x17,0x05,0x12,0x14,0x18,0x15,0x09,0x0f,0x10,0x1b,0x1d,'\n',0xff,0x01,0x13, /* 0x10 - 0x1f */ + 0x04,0x06,0x08,0x09,0x0a,0x0b,0x0c, ';','\'', '~',0x00,0x1c,0x1a,0x18,0x03,0x16, /* 0x20 - 0x2f */ + 0x02,0x0e,0x0d, '<', '>', '?',0xff,0xff,0xff,0x00,0xff,0xff,0xff,0xff,0xff,0xff, /* 0x30 - 0x3f */ + 0xff,0xff,0xff,0xff,0xff,0xff,0xff, '7', '8', '9', '-', '4', '5', '6', '+', '1', /* 0x40 - 0x4f */ + '2', '3', '0', '.',0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, /* 0x50 - 0x5F */ + '\r',0xff,0xff + }; + +/****************************************************************** + * Init + ******************************************************************/ + +int isa_kbd_init(void) +{ + char* result; + result=kbd_initialize(); + if (result != NULL) + { + result = kbd_initialize(); + } + if(result==NULL) { + printf("AT Keyboard initialized\n"); + irq_install_handler(KBD_INTERRUPT, (interrupt_handler_t *)kbd_interrupt, NULL); + return (1); + } + else { + printf("%s\n",result); + return (-1); + } +} + +#ifdef CFG_CONSOLE_OVERWRITE_ROUTINE +extern int overwrite_console (void); +#else +int overwrite_console (void) +{ + return (0); +} +#endif + +int drv_isa_kbd_init (void) +{ + int error; + device_t kbddev ; + char *stdinname = getenv ("stdin"); + + if(isa_kbd_init()==-1) + return -1; + memset (&kbddev, 0, sizeof(kbddev)); + strcpy(kbddev.name, DEVNAME); + kbddev.flags = DEV_FLAGS_INPUT | DEV_FLAGS_SYSTEM; + kbddev.putc = NULL ; + kbddev.puts = NULL ; + kbddev.getc = kbd_getc ; + kbddev.tstc = kbd_testc ; + + error = device_register (&kbddev); + if(error==0) { + /* check if this is the standard input device */ + if(strcmp(stdinname,DEVNAME)==0) { + /* reassign the console */ + if(overwrite_console()) { + return 1; + } + error=console_assign(stdin,DEVNAME); + if(error==0) + return 1; + else + return error; + } + return 1; + } + return error; +} + +/****************************************************************** + * Queue handling + ******************************************************************/ +/* puts character in the queue and sets up the in and out pointer */ +void kbd_put_queue(char data) +{ + if((in_pointer+1)==KBD_BUFFER_LEN) { + if(out_pointer==0) { + return; /* buffer full */ + } else{ + in_pointer=0; + } + } else { + if((in_pointer+1)==out_pointer) + return; /* buffer full */ + in_pointer++; + } + kbd_buffer[in_pointer]=data; + return; +} + +/* test if a character is in the queue */ +int kbd_testc(void) +{ + if(in_pointer==out_pointer) + return(0); /* no data */ + else + return(1); +} +/* gets the character from the queue */ +int kbd_getc(void) +{ + char c; + + while(in_pointer==out_pointer); + if((out_pointer+1)==KBD_BUFFER_LEN) + out_pointer=0; + else + out_pointer++; + c=kbd_buffer[out_pointer]; + return (int)c; + +} + + +/* set LEDs */ + +void kbd_set_leds(void) +{ + if(caps_lock==0) + leds&=~LED_CAP; /* switch caps_lock off */ + else + leds|=LED_CAP; /* switch on LED */ + if(num_lock==0) + leds&=~LED_NUM; /* switch LED off */ + else + leds|=LED_NUM; /* switch on LED */ + if(scroll_lock==0) + leds&=~LED_SCR; /* switch LED off */ + else + leds|=LED_SCR; /* switch on LED */ + kbd_send_data(KBD_CMD_SET_LEDS); + kbd_send_data(leds); +} + + +void handle_keyboard_event(unsigned char scancode) +{ + unsigned char keycode; + + /* Convert scancode to keycode */ + PRINTF("scancode %x\n",scancode); + if(scancode==0xe0) { + e0=1; /* special charakters */ + return; + } + if(e0==1) { + e0=0; /* delete flag */ + if(!( ((scancode&0x7F)==0x38)|| /* the right ctrl key */ + ((scancode&0x7F)==0x1D)|| /* the right alt key */ + ((scancode&0x7F)==0x35)|| /* the right '/' key */ + ((scancode&0x7F)==0x1C)|| /* the right enter key */ + ((scancode)==0x48)|| /* arrow up */ + ((scancode)==0x50)|| /* arrow down */ + ((scancode)==0x4b)|| /* arrow left */ + ((scancode)==0x4d))) /* arrow right */ + /* we swallow unknown e0 codes */ + return; + } + /* special cntrl keys */ + switch(scancode) + { + case 0x48: + kbd_put_queue(27); + kbd_put_queue(91); + kbd_put_queue('A'); + return; + case 0x50: + kbd_put_queue(27); + kbd_put_queue(91); + kbd_put_queue('B'); + return; + case 0x4b: + kbd_put_queue(27); + kbd_put_queue(91); + kbd_put_queue('D'); + return; + case 0x4D: + kbd_put_queue(27); + kbd_put_queue(91); + kbd_put_queue('C'); + return; + case 0x58: /* F12 key */ + if (ctrl == 1) + { + extern int console_changed; + setenv("stdin", DEVNAME); + setenv("stdout", "vga"); + console_changed = 1; + } + return; + case 0x2A: + case 0x36: /* shift pressed */ + shift=1; + return; /* do nothing else */ + case 0xAA: + case 0xB6: /* shift released */ + shift=0; + return; /* do nothing else */ + case 0x38: /* alt pressed */ + alt=1; + return; /* do nothing else */ + case 0xB8: /* alt released */ + alt=0; + return; /* do nothing else */ + case 0x1d: /* ctrl pressed */ + ctrl=1; + return; /* do nothing else */ + case 0x9d: /* ctrl released */ + ctrl=0; + return; /* do nothing else */ + case 0x46: /* scrollock pressed */ + scroll_lock=~scroll_lock; + kbd_set_leds(); + return; /* do nothing else */ + case 0x3A: /* capslock pressed */ + caps_lock=~caps_lock; + kbd_set_leds(); + return; + case 0x45: /* numlock pressed */ + num_lock=~num_lock; + kbd_set_leds(); + return; + case 0xC6: /* scroll lock released */ + case 0xC5: /* num lock released */ + case 0xBA: /* caps lock released */ + return; /* just swallow */ + } + if((scancode&0x80)==0x80) /* key released */ + return; + /* now, decide which table we need */ + if(scancode > (sizeof(kbd_plain_xlate)/sizeof(kbd_plain_xlate[0]))) { /* scancode not in list */ + PRINTF("unkown scancode %X\n",scancode); + return; /* swallow it */ + } + /* setup plain code first */ + keycode=kbd_plain_xlate[scancode]; + if(caps_lock==1) { /* caps_lock is pressed, overwrite plain code */ + if(scancode > (sizeof(kbd_shift_xlate)/sizeof(kbd_shift_xlate[0]))) { /* scancode not in list */ + PRINTF("unkown caps-locked scancode %X\n",scancode); + return; /* swallow it */ + } + keycode=kbd_shift_xlate[scancode]; + if(keycode<'A') { /* we only want the alphas capital */ + keycode=kbd_plain_xlate[scancode]; + } + } + if(shift==1) { /* shift overwrites caps_lock */ + if(scancode > (sizeof(kbd_shift_xlate)/sizeof(kbd_shift_xlate[0]))) { /* scancode not in list */ + PRINTF("unkown shifted scancode %X\n",scancode); + return; /* swallow it */ + } + keycode=kbd_shift_xlate[scancode]; + } + if(ctrl==1) { /* ctrl overwrites caps_lock and shift */ + if(scancode > (sizeof(kbd_ctrl_xlate)/sizeof(kbd_ctrl_xlate[0]))) { /* scancode not in list */ + PRINTF("unkown ctrl scancode %X\n",scancode); + return; /* swallow it */ + } + keycode=kbd_ctrl_xlate[scancode]; + } + /* check if valid keycode */ + if(keycode==0xff) { + PRINTF("unkown scancode %X\n",scancode); + return; /* swallow unknown codes */ + } + + kbd_put_queue(keycode); + PRINTF("%x\n",keycode); +} + +/* + * This reads the keyboard status port, and does the + * appropriate action. + * + */ +unsigned char handle_kbd_event(void) +{ + unsigned char status = kbd_read_status(); + unsigned int work = 10000; + + while ((--work > 0) && (status & KBD_STAT_OBF)) { + unsigned char scancode; + + scancode = kbd_read_input(); + + /* Error bytes must be ignored to make the + Synaptics touchpads compaq use work */ + /* Ignore error bytes */ + if (!(status & (KBD_STAT_GTO | KBD_STAT_PERR))) + { + if (status & KBD_STAT_MOUSE_OBF) + ; /* not supported: handle_mouse_event(scancode); */ + else + handle_keyboard_event(scancode); + } + status = kbd_read_status(); + } + if (!work) + PRINTF("pc_keyb: controller jammed (0x%02X).\n", status); + return status; +} + + + +/****************************************************************************** + * Lowlevel Part of keyboard section + */ +unsigned char kbd_read_status(void) +{ + return(in8(CFG_ISA_IO_BASE_ADDRESS + KDB_COMMAND_PORT)); +} + +unsigned char kbd_read_input(void) +{ + return(in8(CFG_ISA_IO_BASE_ADDRESS + KDB_DATA_PORT)); +} + +void kbd_write_command(unsigned char cmd) +{ + out8(CFG_ISA_IO_BASE_ADDRESS + KDB_COMMAND_PORT,cmd); +} + +void kbd_write_output(unsigned char data) +{ + out8(CFG_ISA_IO_BASE_ADDRESS + KDB_DATA_PORT, data); +} + +int kbd_read_data(void) +{ + int val; + unsigned char status; + + val=-1; + status = kbd_read_status(); + if (status & KBD_STAT_OBF) { + val = kbd_read_input(); + if (status & (KBD_STAT_GTO | KBD_STAT_PERR)) + val = -2; + } + return val; +} + +int kbd_wait_for_input(void) +{ + unsigned long timeout; + int val; + + timeout = KBD_TIMEOUT; + val=kbd_read_data(); + while(val < 0) + { + if(timeout--==0) + return -1; + udelay(1000); + val=kbd_read_data(); + } + return val; +} + + +int kb_wait(void) +{ + unsigned long timeout = KBC_TIMEOUT * 10; + + do { + unsigned char status = handle_kbd_event(); + if (!(status & KBD_STAT_IBF)) + return 0; /* ok */ + udelay(1000); + timeout--; + } while (timeout); + return 1; +} + +void kbd_write_command_w(int data) +{ + if(kb_wait()) + PRINTF("timeout in kbd_write_command_w\n"); + kbd_write_command(data); +} + +void kbd_write_output_w(int data) +{ + if(kb_wait()) + PRINTF("timeout in kbd_write_output_w\n"); + kbd_write_output(data); +} + +void kbd_send_data(unsigned char data) +{ + unsigned char status; + i8259_mask_irq(KBD_INTERRUPT); /* disable interrupt */ + kbd_write_output_w(data); + status = kbd_wait_for_input(); + if (status == KBD_REPLY_ACK) + i8259_unmask_irq(KBD_INTERRUPT); /* enable interrupt */ +} + + +char * kbd_initialize(void) +{ + int status; + + in_pointer = 0; /* delete in Buffer */ + out_pointer = 0; + /* + * Test the keyboard interface. + * This seems to be the only way to get it going. + * If the test is successful a x55 is placed in the input buffer. + */ + kbd_write_command_w(KBD_CCMD_SELF_TEST); + if (kbd_wait_for_input() != 0x55) + return "Kbd: failed self test"; + /* + * Perform a keyboard interface test. This causes the controller + * to test the keyboard clock and data lines. The results of the + * test are placed in the input buffer. + */ + kbd_write_command_w(KBD_CCMD_KBD_TEST); + if (kbd_wait_for_input() != 0x00) + return "Kbd: interface failed self test"; + /* + * Enable the keyboard by allowing the keyboard clock to run. + */ + kbd_write_command_w(KBD_CCMD_KBD_ENABLE); + status = kbd_wait_for_input(); + /* + * Reset keyboard. If the read times out + * then the assumption is that no keyboard is + * plugged into the machine. + * This defaults the keyboard to scan-code set 2. + * + * Set up to try again if the keyboard asks for RESEND. + */ + do { + kbd_write_output_w(KBD_CMD_RESET); + status = kbd_wait_for_input(); + if (status == KBD_REPLY_ACK) + break; + if (status != KBD_REPLY_RESEND) + { + PRINTF("status: %X\n",status); + return "Kbd: reset failed, no ACK"; + } + } while (1); + if (kbd_wait_for_input() != KBD_REPLY_POR) + return "Kbd: reset failed, no POR"; + + /* + * Set keyboard controller mode. During this, the keyboard should be + * in the disabled state. + * + * Set up to try again if the keyboard asks for RESEND. + */ + do { + kbd_write_output_w(KBD_CMD_DISABLE); + status = kbd_wait_for_input(); + if (status == KBD_REPLY_ACK) + break; + if (status != KBD_REPLY_RESEND) + return "Kbd: disable keyboard: no ACK"; + } while (1); + + kbd_write_command_w(KBD_CCMD_WRITE_MODE); + kbd_write_output_w(KBD_MODE_KBD_INT + | KBD_MODE_SYS + | KBD_MODE_DISABLE_MOUSE + | KBD_MODE_KCC); + + /* ibm powerpc portables need this to use scan-code set 1 -- Cort */ + kbd_write_command_w(KBD_CCMD_READ_MODE); + if (!(kbd_wait_for_input() & KBD_MODE_KCC)) { + /* + * If the controller does not support conversion, + * Set the keyboard to scan-code set 1. + */ + kbd_write_output_w(0xF0); + kbd_wait_for_input(); + kbd_write_output_w(0x01); + kbd_wait_for_input(); + } + kbd_write_output_w(KBD_CMD_ENABLE); + if (kbd_wait_for_input() != KBD_REPLY_ACK) + return "Kbd: enable keyboard: no ACK"; + + /* + * Finally, set the typematic rate to maximum. + */ + kbd_write_output_w(KBD_CMD_SET_RATE); + if (kbd_wait_for_input() != KBD_REPLY_ACK) + return "Kbd: Set rate: no ACK"; + kbd_write_output_w(0x00); + if (kbd_wait_for_input() != KBD_REPLY_ACK) + return "Kbd: Set rate: no ACK"; + return NULL; +} + +void kbd_interrupt(void) +{ + handle_kbd_event(); +} + + + +/* eof */ + diff --git a/board/MAI/AmigaOneG3SE/ps2kbd.h b/board/MAI/AmigaOneG3SE/ps2kbd.h new file mode 100644 index 00000000000..95fc14d66ab --- /dev/null +++ b/board/MAI/AmigaOneG3SE/ps2kbd.h @@ -0,0 +1,41 @@ +/* + * (C) Copyright 2002 + * John W. Linville, linville@tuxdriver.com + * + * Modified from code for support of MIP405 and PIP405 boards. Previous + * copyright follows. + * + * (C) Copyright 2001 + * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#ifndef _KBD_H_ +#define _KBD_H_ + +extern int kbd_testc(void); +extern int kbd_getc(void); +extern void kbd_interrupt(void); +extern char *kbd_initialize(void); + +unsigned char kbd_is_init(void); +#define KBD_INTERRUPT 1 +#endif diff --git a/board/MAI/AmigaOneG3SE/serial.c b/board/MAI/AmigaOneG3SE/serial.c new file mode 100644 index 00000000000..e83fb46c735 --- /dev/null +++ b/board/MAI/AmigaOneG3SE/serial.c @@ -0,0 +1,247 @@ +#include <common.h> +#include <ns16550.h> +#include "short_types.h" +#include "memio.h" +#include "articiaS.h" + +#ifndef CFG_NS16550 +static uint32 ComPort1; + +uint16 SerialEcho = 1; + + +#define RECEIVER_HOLDING 0 +#define TRANSMITTER_HOLDING 0 +#define INTERRUPT_ENABLE 1 +#define INTERRUPT_STATUS 2 +#define FIFO_CONTROL 2 +#define LINE_CONTROL 3 +#define MODEM_CONTROL 4 +#define LINE_STATUS 5 +#define MODEM_STATUS 6 +#define SCRATCH_PAD 7 + +#define DIVISOR_LATCH_LSB 0 +#define DIVISOR_LATCH_MSB 1 +#define PRESCALER_DIVISION 5 + +#define COM_WRITE_BYTE(reg, byte) out_byte((ComPort1+reg), byte) +#define COM_READ_BYTE(reg) in_byte((ComPort1+reg)) + +static int serial_init_done = 0; + +void serial_init (void) +{ +#if 0 + uint32 clock_divisor = 115200 / baudrate; + uint8 cfg; + uint8 a; + uint16 devfn = 7 << 3; + + if (serial_init_done) + return; + + /* Enter configuration mode */ + cfg = pci_read_cfg_byte (0, devfn, 0x85); + pci_write_cfg_byte (0, devfn, 0x85, cfg | 0x02); + + /* Set serial port COM1 as 3F8 */ + out_byte (0x3F0, 0xE7); + out_byte (0x3f1, 0xfe); + + /* Set serial port COM2 as 2F8 */ + out_byte (0x3f0, 0xe8); + out_byte (0x3f1, 0xeb); + + /* Enable */ + out_byte (0x3f0, 0xe2); + a = in_byte (0x3f1); + a |= 0xc; + out_byte (0x3f0, 0xe2); + out_byte (0x3f1, a); + + /* Reset the configuration mode */ + pci_write_cfg_byte (0, devfn, 0x85, cfg); +#endif + + ComPort1 = 0x3F8; + + /* Disable interrupts */ + COM_WRITE_BYTE (INTERRUPT_ENABLE, 0x00); + + /* Set baud rate */ + /* COM_WRITE_BYTE(LINE_CONTROL, 0x83); */ + /* COM_WRITE_BYTE(DIVISOR_LATCH_LSB, (uint8)(clock_divisor & 0xFF)); */ + /* COM_WRITE_BYTE(DIVISOR_LATCH_MSB, (uint8)(clock_divisor >> 8)); */ + /* __asm("eieio"); */ + + /* Set 8-N-1 */ + COM_WRITE_BYTE (LINE_CONTROL, 0x03); + __asm ("eieio"); + + /* Disable FIFO */ + COM_WRITE_BYTE (MODEM_CONTROL, 0x03); + COM_WRITE_BYTE (FIFO_CONTROL, 0x07); + + __asm ("eieio"); + serial_init_done = 1; +} + +extern int console_changed; + +void serial_putc (const char sendme) +{ + if (sendme == '\n') { + while ((in_byte (0x3FD) & 0x40) == 0); + out_byte (0x3f8, 0x0D); + } + + while ((in_byte (0x3FD) & 0x40) == 0); + out_byte (0x3f8, sendme); +} + +int serial_getc (void) +{ +#if 0 + uint8 c; + + for (;;) { + uint8 x = in_byte (0x3FD); + + if (x & 0x01) + break; + + if (x & 0x0C) + out_byte (0x3fd, 0x0c); + } + + c = in_byte (0x3F8); + + return c; +#else + while ((in_byte (0x3FD) & 0x01) == 0) { + if (console_changed != 0) { + printf ("Console changed\n"); + console_changed = 0; + return 0; + } + } + return in_byte (0x3F8); +#endif +} + +int serial_tstc (void) +{ + return (in_byte (0x03FD) & 0x01) != 0; +} + +void serial_debug_putc (int c) +{ + serial_puts ("DBG"); + serial_putc (c); + serial_putc (0x0d); + serial_putc (0x0A); +} + +#else + +const NS16550_t Com0 = (NS16550_t) CFG_NS16550_COM1; +const NS16550_t Com1 = (NS16550_t) CFG_NS16550_COM2; + +int serial_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + uint32 clock_divisor = 115200 / gd->baudrate; + + NS16550_init (Com0, clock_divisor); + /* NS16550_reinit(Com1, clock_divisor); */ + /* serial_puts("COM1: 3F8h initalized"); */ + + return (0); +} + +#if 0 +void serial_putc (const char c) +{ + NS16550_putc (Com0, c); + if (c == '\n') + NS16550_putc (Com0, 0x0D); +} + +int serial_getc (void) +{ + return (int) NS16550_getc (Com0); +} + +int serial_tstc (void) +{ + return NS16550_tstc (Com0); +} +#else +void serial_putc (const char sendme) +{ + if (sendme == '\n') { + while ((in_byte (0x3FD) & 0x40) == 0); + out_byte (0x3f8, 0x0D); + } + + while ((in_byte (0x3FD) & 0x40) == 0); + out_byte (0x3f8, sendme); +} + + +extern int console_changed; + +int serial_getc (void) +{ +#if 0 + uint8 c; + + for (;;) { + uint8 x = in_byte (0x3FD); + + if (x & 0x01) + break; + + if (x & 0x0C) + out_byte (0x3fd, 0x0c); + } + + c = in_byte (0x3F8); + + return c; +#else + while ((in_byte (0x3FD) & 0x01) == 0) { + if (console_changed != 0) { + console_changed = 0; + return 0; + } + } + + return in_byte (0x3F8); +#endif +} + +int serial_tstc (void) +{ + return (in_byte (0x03FD) & 0x01) != 0; +} +#endif + +#endif + +void serial_puts (const char *string) +{ + while (*string) + serial_putc (*string++); +} + +void serial_setbrg (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + uint32 clock_divisor = 115200 / gd->baudrate; + + NS16550_init (Com0, clock_divisor); +} diff --git a/board/MAI/AmigaOneG3SE/short_types.h b/board/MAI/AmigaOneG3SE/short_types.h new file mode 100644 index 00000000000..22df3c92c46 --- /dev/null +++ b/board/MAI/AmigaOneG3SE/short_types.h @@ -0,0 +1,36 @@ +/* + * short type names + * + * (C) Copyright 2002 + * Hyperion Entertainment, ThomasF@hyperion-entertainment.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _SHORT_TYPES_H +#define _SHORT_TYPES_H + +typedef unsigned long uint32; +typedef long int32; +typedef unsigned short uint16; +typedef short int16; +typedef unsigned char uint8; +typedef signed char int8; + +#endif diff --git a/board/MAI/AmigaOneG3SE/smbus.c b/board/MAI/AmigaOneG3SE/smbus.c new file mode 100644 index 00000000000..616005ea939 --- /dev/null +++ b/board/MAI/AmigaOneG3SE/smbus.c @@ -0,0 +1,206 @@ +#include "memio.h" +#include "articiaS.h" + +#ifndef FALSE +#define FALSE 0 +#endif + +#ifndef TRUE +#define TRUE 1 +#endif + + +void sm_write_mode(void) +{ + out_byte(0xA539, 0x00); + out_byte(0xA53A, 0x03); +} + +void sm_read_mode(void) +{ + out_byte(0xA53A, 0x02); + out_byte(0xA539, 0x02); +} + +void sm_write_byte(uint8 writeme) +{ + int i; + int level; + + out_byte(0xA539, 0x00); + + level = 0; + + for (i=0; i<8; i++) + { + if ((writeme & 0x80) == (level<<7)) + { + /* Bit did not change, rewrite strobe */ + out_byte(0xA539, level | 0x02); + out_byte(0xA539, level); + } + else + { + /* Bit changed, set bit, then strobe */ + level = (writeme & 0x80) >> 7; + out_byte(0xA539, level); + out_byte(0xA539, level | 0x02); + out_byte(0xA539, level); + } + writeme <<= 1; + } + out_byte(0xA539, 0x00); +} + +uint8 sm_read_byte(void) +{ + uint8 retme, r; + int i; + + retme = 0; + for (i=0; i<8; i++) + { + retme <<= 1; + out_byte(0xA539, 0x00); + out_byte(0xA539, 0x02); + r = in_byte(0xA538) & 0x01; + retme |= r; + } + + return retme; +} + +int sm_get_ack(void) +{ + uint8 r; + r = in_byte(0xA538); + if ((r&0x01) == 0) return TRUE; + else return FALSE; +} + +void sm_write_ack(void) +{ + out_byte(0xA539, 0x00); + out_byte(0xA539, 0x02); + out_byte(0xA539, 0x00); +} + +void sm_write_nack(void) +{ + out_byte(0xA539, 0x01); + out_byte(0xA539, 0x03); + out_byte(0xA539, 0x01); +} + +void sm_send_start(void) +{ + out_byte(0xA539, 0x03); + out_byte(0xA539, 0x02); +} + +void sm_send_stop(void) +{ + out_byte(0xA539, 0x02); + out_byte(0xA539, 0x03); +} + +int sm_read_byte_from_device(uint8 addr, uint8 reg, uint8 *storage) +{ + // S Addr Wr + sm_write_mode(); + sm_send_start(); + sm_write_byte((addr<<1)); + + // [A] + sm_read_mode(); + if (sm_get_ack() == FALSE) return FALSE; + + // Comm + sm_write_mode(); + sm_write_byte(reg); + + // [A] + sm_read_mode(); + if (sm_get_ack() == FALSE) return FALSE; + + // S Addr Rd + sm_write_mode(); + sm_send_start(); + sm_write_byte((addr<<1)|1); + + // [A] + sm_read_mode(); + if (sm_get_ack() == FALSE) return FALSE; + + // [Data] + *storage = sm_read_byte(); + + // NA + sm_write_mode(); + sm_write_nack(); + sm_send_stop(); + + return TRUE; +} + +void sm_init(void) +{ + /* Switch to PMC mode */ + pci_write_cfg_byte(0, 0, REG_GROUP, (uint8)(REG_GROUP_SPECIAL|REG_GROUP_POWER)); + + /* Set GPIO Base */ + pci_write_cfg_long(0, 0, 0x40, 0xa500); + + /* Enable GPIO */ + pci_write_cfg_byte(0, 0, 0x44, 0x11); + + /* Set both GPIO 0 and 1 as output */ + out_byte(0xA53A, 0x03); +} + + +void sm_term(void) +{ + /* Switch to normal mode */ + pci_write_cfg_byte(0, 0, REG_GROUP, 0); +} + + +int sm_get_data(uint8 *DataArray, int dimm_socket) +{ + int j; + +#if 0 + /* Switch to PMC mode */ + pci_write_cfg_byte(0, 0, REG_GROUP, (uint8)(REG_GROUP_SPECIAL|REG_GROUP_POWER)); + + /* Set GPIO Base */ + pci_write_cfg_long(0, 0, 0x40, 0xa500); + + /* Enable GPIO */ + pci_write_cfg_byte(0, 0, 0x44, 0x11); + + /* Set both GPIO 0 and 1 as output */ + out_byte(0xA53A, 0x03); +#endif + + sm_init(); + /* Start reading the rom */ + + j = 0; + + do + { + if (sm_read_byte_from_device(dimm_socket, (uint8)j, DataArray) == FALSE) + { + sm_term(); + return FALSE; + } + + DataArray++; + j++; + } while (j < 128); + + sm_term(); + return TRUE; +} diff --git a/board/MAI/AmigaOneG3SE/smbus.h b/board/MAI/AmigaOneG3SE/smbus.h new file mode 100644 index 00000000000..beeb6a06aaf --- /dev/null +++ b/board/MAI/AmigaOneG3SE/smbus.h @@ -0,0 +1,22 @@ +#ifndef _SMBUS_H_ +#define _SMBUS_H_ + +#include "short_types.h" + +#define SM_DIMM0_ADDR 0x51 +#define SM_DIMM1_ADDR 0x52 + +void sm_write_mode(void); +void sm_read_mode(void); +void sm_write_byte(uint8 writeme); +uint8 sm_read_byte(void); +int sm_get_ack(void); +void sm_write_ack(void); +void sm_write_nack(void); +void sm_send_start(void); +void sm_send_stop(void); +int sm_read_byte_from_device(uint8 addr, uint8 reg, uint8 *storage); +int sm_get_data(uint8 *DataArray, int dimm_socket); +void sm_init(void); +void sm_term(void); +#endif diff --git a/board/MAI/AmigaOneG3SE/start.txt b/board/MAI/AmigaOneG3SE/start.txt new file mode 100644 index 00000000000..5c7b541a2b5 --- /dev/null +++ b/board/MAI/AmigaOneG3SE/start.txt @@ -0,0 +1,201 @@ +
+ /*------------------------------------------------------*/
+ /* TERON Articia / SDRAM Init */
+ /*------------------------------------------------------*/
+
+* XD_CTL = 0x81000000 (0x74)
+
+* HBUS_ACC_CTL_0 &= 0xFFFFFDFF (0x5c)
+ /* host bus access ctl reg 2(5e) */
+ /* set - CPU read from memory data one clock after data is latched */
+
+* GLOBL_INFO_0 |= 0x00004000 (0x50)
+ /* global info register 2 (52), AGP/PCI bus 1 arbiter is addressed in Articia S */
+
+ PCI_1_SB_CONFIG_0 |= 0x00000400 (0x80d0)
+ /* PCI1 side band config reg 2 (d2), enable read acces while write buffer not empty */
+
+ MEM_RAS_CTL_0 |= 0x3f000000 (0xcc)
+ &= 0x3fffffff
+ /* RAS park control reg 0(cc), park access enable is set */
+
+ HOST_RDBUF_CTL |= 0x10000000 (0x70)
+ &= 0x10ffffff
+ /* host read buffer control reg, enable prefetch for CPU read from DRAM control */
+
+ HBUS_ACC_CTL_0 |= 0x0100001f (0x5c)
+ &= 0xf1ffffff
+ /* host bus access control register, enable CPU address bus pipe control */
+ /* two outstanding requests, *** changed to 2 from 3 */
+ /* enable line merge write control for CPU write to system memory, PCI 1 */
+ /* and PCI 0 bus memory; enable page merge write control for write to */
+ /* PCI bus 0 & bus 1 memory */
+
+ SRAM_CTL |= 0x00004000 (0xc8)
+ &= 0xffbff7ff
+ /* DRAM detail timing control register 1 (ca), bit 3 set to 0 */
+ /* DRAM start access latency control - wait for one clock */
+ /* ff9f changed to ffbf */
+
+ DIM0_TIM_CTL_0 = 0x737d737d (0xc9)
+ /* DRAM timing control for dimm0 & dimm1; set wait one clock */
+ /* cycle for next data access */
+
+ DIM2_TIM_CTL_0 = 0x737d737d (0xca)
+ /* DRAM timing control for dimm2 & dimm3; set wait one clock */
+ /* cycle for next data access */
+
+ DIM0_BNK0_CTL_0 = BNK0_RAM_SIZ_128MB (0x90)
+ /* set dimm0 bank0 for 128 MB */
+
+ DIM0_BNK1_CTL_0 = BNK1_RAM_SIZ_128MB (0x94)
+ /* set dimm0 for bank1 */
+
+ DIM0_TIM_CTL_0 = 0xf3bf0000 (0xc9)
+ /* dimm0 timing control register; RAS - CAS latency - 4 clock */
+ /* CAS access latency - 3 wait; pre-charge latency - 3 wait */
+ /* pre-charge command period control - 5 clock; wait one clock */
+ /* cycle for next data access; read to write access latency control */
+ /* - 2 clock cycles */
+
+ DRAM_GBL_CTL_0 |= 0x00000100 (0xc0)
+ &= 0xffff01ff
+ /* memory global control register - support buffer sdram on bank 0 */
+
+ DRAM_ECC_CTL_0 |= 0x00260000 (0xc4)
+ &= 0xff26ffff
+ /* enable ECC; enable read, modify, write control */
+
+ DRAM_REF_CTL_0 = DRAM_REF_DATA (0xb8)
+ /* set DRAM refresh parameters *** changed to 00940100 */
+
+ nop
+ nop
+ nop
+ nop
+ nop
+
+ DRAM_ECC_CTL_0 |= 0x20243280 (0xc4)
+ /* turn off ecc */
+ /* for SDRAM bank 0 */
+
+ DRAM_ECC_CTL_0 |= 0x20243290 (0xc4) ?
+ /* for SDRAM bank 1 */
+
+
+/* Additional Stuff...*/
+
+ GLOBL_CTRL |= 0x20000b00 (0x54)
+
+ PCI_0_SB_CONFIG |= 0x04100007 (0xd0)
+ /* PCI 0 Side band config reg*/
+
+ 0x8000083c |= 0x00080000
+ /* Disable VGA decode on PCI Bus 1 */
+
+
+/*End Additional Stuff..*/
+
+ /*--------------------------------------------------------------*/
+ /* TERON serial port initialization code */
+ /*--------------------------------------------------------------*/
+
+ 0x84380080 |= 0x00030000
+ /* enable super IO configuration VIA chip Register 85 */
+ /* Enable super I/O config mode */
+
+ 0xfe0003f0 = 0xe2
+ bl delay1
+
+ 0xfe0003f1 = 0x0f
+ bl delay1
+ /* enable com1 & com2, parallel port disabled */
+
+ 0xfe0003f0 = 0xe7
+ bl delay1
+ /* let's make com1 base as 0x3f8 */
+
+ 0xfe0003f1 = 0xfe
+ bl delay1
+
+ 0xfe0003f0 = 0xe8
+ bl delay1
+ /* let's make com2 base as 0x2f8 */
+
+ 0xfe0003f1 = 0xbe
+
+ 0x84380080 &= 0xfffdffff
+ /* closing super IO configuration VIA chip Register 85 */
+
+
+/* -------------------------------*/
+
+ 0xfe0003fb = 0x83
+ bl delay1
+ /*latch enable word length -8 bit */ /* set mslab bit */
+ 0xfe0003f8 = 0x0c
+ bl delay1
+ /* set baud rate lsb for 9600 baud */
+ 0xfe0003f9 = 0x0
+ bl delay1
+ /* set baud rate msb for 9600 baud */
+ 0xfe0003fb = 0x03
+ bl delay1
+ /* reset mslab */
+
+ /*--------------------------------------------------------------*/
+ /* END TERON Serial Port Initialization Code */
+ /*--------------------------------------------------------------*/
+
+
+
+ /*--------------------------------------------------------------*/
+ /* END TERON Articia / SDRAM Initialization code */
+ /*--------------------------------------------------------------*/
+
+Proposed from Documentation:
+
+write dmem 0xfec00cf8 0x50000080
+write dmem 0xfee00cfc 0xc0305411
+
+ Writes to index 0x50-0x53.
+ 0x50: Global Information Register 0
+ 0xC0 = Little Endian CPU, Sequential order Burst
+ 0x51: Global Information Register 1
+ Read only, 0x30 = Provides PowerPC and X86 support
+ 0x52: Global Information Register 2
+ 0x05 = 64/128 bit CPU bus support
+ 0x53: Global Information Register 3
+ 0x80 = PCI Bus 0 grant active time is 1 clock after REQ# deasserted
+
+write dmem 0xfec00cf8 0x5c000080
+write dmem 0xfee00cfc 0xb300011F
+
+write dmem 0xfec00cf8 0xc8000080
+write dmem 0xfee00cfc 0x0020f100
+
+write dmem 0xfec00cf8 0x90000080
+write dmem 0xfee00cfc 0x007fe700
+
+write dmem 0xfec00cf8 0x9400080
+write dmem 0xfee00cfc 0x007fe700
+
+write dmem 0xfec00cf8 0xb0000080
+write dmem 0xfee00cfc 0x737d737d
+
+write dmem 0xfec00cf8 0xb4000080
+write dmem 0xfee00cfc 0x737d737d
+
+write dmem 0xfec00cf8 0xc0000080
+write dmem 0xfee00cfc 0x40005500
+
+write dmem 0xfec00cf8 0xb8000080
+write dmem 0xfee00cfc 0x00940100
+
+write dmem 0xfec00cf8 0xc4000080
+write dmem 0xfee00cfc 0x00003280
+
+write dmem 0xfec00cf8 0xc4000080
+write dmem 0xfee00cfc 0x00003290
+
+
diff --git a/board/MAI/AmigaOneG3SE/todo.txt b/board/MAI/AmigaOneG3SE/todo.txt new file mode 100644 index 00000000000..df25e3dee0d --- /dev/null +++ b/board/MAI/AmigaOneG3SE/todo.txt @@ -0,0 +1,3 @@ +- Init interrupt controller +- init sdram +- init ide controller
\ No newline at end of file diff --git a/board/MAI/AmigaOneG3SE/u-boot.lds b/board/MAI/AmigaOneG3SE/u-boot.lds new file mode 100644 index 00000000000..d36a7e1caaf --- /dev/null +++ b/board/MAI/AmigaOneG3SE/u-boot.lds @@ -0,0 +1,131 @@ +/* + * (C) Copyright 2001 + * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc. + * + * (C) Copyright 2002 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * u-boot.lds - linker script for U-Boot on the AmigaOneG3SE Board. + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + cpu/74xx_7xx/start.o (.text) +/* store the environment in a seperate sector in the boot flash */ +/* . = env_offset; */ + common/environment.o(.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = ALIGN(4) /*.*/ ; + PROVIDE (end = ALIGN(4) /*.*/); +} diff --git a/board/MAI/AmigaOneG3SE/usb_uhci.c b/board/MAI/AmigaOneG3SE/usb_uhci.c new file mode 100644 index 00000000000..fd8cb4ef33f --- /dev/null +++ b/board/MAI/AmigaOneG3SE/usb_uhci.c @@ -0,0 +1,1179 @@ +/* + * (C) Copyright 2001 + * Denis Peter, MPL AG Switzerland + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Note: Part of this code has been derived from linux + * + */ + +/********************************************************************** + * How it works: + * ------------- + * The framelist / Transfer descriptor / Queue Heads are similar like + * in the linux usb_uhci.c. + * + * During initialization, the following skeleton is allocated in init_skel: + * + * framespecific | common chain + * + * framelist[] + * [ 0 ]-----> TD ---------\ + * [ 1 ]-----> TD ----------> TD ------> QH -------> QH -------> QH ---> NULL + * ... TD ---------/ + * [1023]-----> TD --------/ + * + * ^^ ^^ ^^ ^^ ^^ + * 7 TDs for 1 TD for Start of Start of End Chain + * INT (2-128ms) 1ms-INT CTRL Chain BULK Chain + * + * + * Since this is a bootloader, the isochronous transfer descriptor have been removed. + * + * Interrupt Transfers. + * -------------------- + * For Interupt transfers USB_MAX_TEMP_INT_TD Transfer descriptor are available. They + * will be inserted after the appropriate (depending the interval setting) skeleton TD. + * If an interrupt has been detected the dev->irqhandler is called. The status and number + * of transfered bytes is stored in dev->irq_status resp. dev->irq_act_len. If the + * dev->irqhandler returns 0, the interrupt TD is removed and disabled. If an 1 is returned, + * the interrupt TD will be reactivated. + * + * Control Transfers + * ----------------- + * Control Transfers are issued by filling the tmp_td with the appropriate data and connect + * them to the qh_cntrl queue header. Before other control/bulk transfers can be issued, + * the programm has to wait for completion. This does not allows asynchronous data transfer. + * + * Bulk Transfers + * -------------- + * Bulk Transfers are issued by filling the tmp_td with the appropriate data and connect + * them to the qh_bulk queue header. Before other control/bulk transfers can be issued, + * the programm has to wait for completion. This does not allows asynchronous data transfer. + * + * + */ + +#include <common.h> +#include <pci.h> + +#ifdef CONFIG_USB_UHCI + +#include <usb.h> +#include "usb_uhci.h" + +#define USB_MAX_TEMP_TD 128 /* number of temporary TDs for bulk and control transfers */ +#define USB_MAX_TEMP_INT_TD 32 /* number of temporary TDs for Interrupt transfers */ + + +//#define USB_UHCI_DEBUG + +#ifdef USB_UHCI_DEBUG +#define USB_UHCI_PRINTF(fmt,args...) printf (fmt ,##args) +#else +#define USB_UHCI_PRINTF(fmt,args...) +#endif + + +static int irqvec = -1; /* irq vector, if -1 uhci is stopped / reseted */ +unsigned int usb_base_addr; /* base address */ + +static uhci_td_t td_int[8]; /* Interrupt Transfer descriptors */ +static uhci_qh_t qh_cntrl; /* control Queue Head */ +static uhci_qh_t qh_bulk; /* bulk Queue Head */ +static uhci_qh_t qh_end; /* end Queue Head */ +static uhci_td_t td_last; /* last TD (linked with end chain) */ + +/* temporary tds */ +static uhci_td_t tmp_td[USB_MAX_TEMP_TD]; /* temporary bulk/control td's */ +static uhci_td_t tmp_int_td[USB_MAX_TEMP_INT_TD]; /* temporary interrupt td's */ + +static unsigned long framelist[1024] __attribute__ ((aligned (0x1000))); /* frame list */ + +static struct virt_root_hub rh; /* struct for root hub */ + +/********************************************************************** + * some forward decleration + */ +int uhci_submit_rh_msg(struct usb_device *dev, unsigned long pipe, + void *buffer, int transfer_len,struct devrequest *setup); + +/* fill a td with the approproiate data. Link, status, info and buffer + * are used by the USB controller itselfes, dev is used to identify the + * "connected" device + */ +void usb_fill_td(uhci_td_t* td,unsigned long link,unsigned long status, + unsigned long info, unsigned long buffer, unsigned long dev) +{ + td->link=swap_32(link); + td->status=swap_32(status); + td->info=swap_32(info); + td->buffer=swap_32(buffer); + td->dev_ptr=dev; +} + +/* fill a qh with the approproiate data. Head and element are used by the USB controller + * itselfes. As soon as a valid dev_ptr is filled, a td chain is connected to the qh. + * Please note, that after completion of the td chain, the entry element is removed / + * marked invalid by the USB controller. + */ +void usb_fill_qh(uhci_qh_t* qh,unsigned long head,unsigned long element) +{ + qh->head=swap_32(head); + qh->element=swap_32(element); + qh->dev_ptr=0L; +} + +/* get the status of a td->status + */ +unsigned long usb_uhci_td_stat(unsigned long status) +{ + unsigned long result=0; + result |= (status & TD_CTRL_NAK) ? USB_ST_NAK_REC : 0; + result |= (status & TD_CTRL_STALLED) ? USB_ST_STALLED : 0; + result |= (status & TD_CTRL_DBUFERR) ? USB_ST_BUF_ERR : 0; + result |= (status & TD_CTRL_BABBLE) ? USB_ST_BABBLE_DET : 0; + result |= (status & TD_CTRL_CRCTIMEO) ? USB_ST_CRC_ERR : 0; + result |= (status & TD_CTRL_BITSTUFF) ? USB_ST_BIT_ERR : 0; + result |= (status & TD_CTRL_ACTIVE) ? USB_ST_NOT_PROC : 0; + return result; +} + +/* get the status and the transfered len of a td chain. + * called from the completion handler + */ +int usb_get_td_status(uhci_td_t *td,struct usb_device *dev) +{ + unsigned long temp,info; + unsigned long stat; + uhci_td_t *mytd=td; + + if(dev->devnum==rh.devnum) + return 0; + dev->act_len=0; + stat=0; + do { + temp=swap_32((unsigned long)mytd->status); + stat=usb_uhci_td_stat(temp); + info=swap_32((unsigned long)mytd->info); + if(((info & 0xff)!= USB_PID_SETUP) && + (((info >> 21) & 0x7ff)!= 0x7ff) && + (temp & 0x7FF)!=0x7ff) + { /* if not setup and not null data pack */ + dev->act_len+=(temp & 0x7FF) + 1; /* the transfered len is act_len + 1 */ + } + if(stat) { /* status no ok */ + dev->status=stat; + return -1; + } + temp=swap_32((unsigned long)mytd->link); + mytd=(uhci_td_t *)(temp & 0xfffffff0); + }while((temp & 0x1)==0); /* process all TDs */ + dev->status=stat; + return 0; /* Ok */ +} + + +/*------------------------------------------------------------------- + * LOW LEVEL STUFF + * assembles QHs und TDs for control, bulk and iso + *-------------------------------------------------------------------*/ + +/* Submits a control message. That is a Setup, Data and Status transfer. + * Routine does not wait for completion. + */ +int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer, + int transfer_len,struct devrequest *setup) +{ + unsigned long destination, status; + int maxsze = usb_maxpacket(dev, pipe); + unsigned long dataptr; + int len; + int pktsze; + int i=0; + + if (!maxsze) { + USB_UHCI_PRINTF("uhci_submit_control_urb: pipesize for pipe %lx is zero\n", pipe); + return -1; + } + if(((pipe>>8)&0x7f)==rh.devnum) { + /* this is the root hub -> redirect it */ + return uhci_submit_rh_msg(dev,pipe,buffer,transfer_len,setup); + } + USB_UHCI_PRINTF("uhci_submit_control start len %x, maxsize %x\n",transfer_len,maxsze); + /* The "pipe" thing contains the destination in bits 8--18 */ + destination = (pipe & PIPE_DEVEP_MASK) | USB_PID_SETUP; /* Setup stage */ + /* 3 errors */ + status = (pipe & TD_CTRL_LS) | TD_CTRL_ACTIVE | (3 << 27); + /* (urb->transfer_flags & USB_DISABLE_SPD ? 0 : TD_CTRL_SPD); */ + /* Build the TD for the control request, try forever, 8 bytes of data */ + usb_fill_td(&tmp_td[i],UHCI_PTR_TERM ,status, destination | (7 << 21),(unsigned long)setup,(unsigned long)dev); +#if 0 + { + char *sp=(char *)setup; + printf("SETUP to pipe %lx: %x %x %x %x %x %x %x %x\n", pipe, + sp[0],sp[1],sp[2],sp[3],sp[4],sp[5],sp[6],sp[7]); + } +#endif + dataptr = (unsigned long)buffer; + len=transfer_len; + + /* If direction is "send", change the frame from SETUP (0x2D) + to OUT (0xE1). Else change it from SETUP to IN (0x69). */ + destination = (pipe & PIPE_DEVEP_MASK) | ((pipe & USB_DIR_IN)==0 ? USB_PID_OUT : USB_PID_IN); + while (len > 0) { + /* data stage */ + pktsze = len; + i++; + if (pktsze > maxsze) + pktsze = maxsze; + destination ^= 1 << TD_TOKEN_TOGGLE; /* toggle DATA0/1 */ + usb_fill_td(&tmp_td[i],UHCI_PTR_TERM, status, destination | ((pktsze - 1) << 21),dataptr,(unsigned long)dev); /* Status, pktsze bytes of data */ + tmp_td[i-1].link=swap_32((unsigned long)&tmp_td[i]); + + dataptr += pktsze; + len -= pktsze; + } + + /* Build the final TD for control status */ + /* It's only IN if the pipe is out AND we aren't expecting data */ + + destination &= ~UHCI_PID; + if (((pipe & USB_DIR_IN)==0) || (transfer_len == 0)) + destination |= USB_PID_IN; + else + destination |= USB_PID_OUT; + destination |= 1 << TD_TOKEN_TOGGLE; /* End in Data1 */ + i++; + status &=~TD_CTRL_SPD; + /* no limit on errors on final packet , 0 bytes of data */ + usb_fill_td(&tmp_td[i],UHCI_PTR_TERM, status | TD_CTRL_IOC, destination | (UHCI_NULL_DATA_SIZE << 21),0,(unsigned long)dev); + tmp_td[i-1].link=swap_32((unsigned long)&tmp_td[i]); /* queue status td */ + /* usb_show_td(i+1);*/ + USB_UHCI_PRINTF("uhci_submit_control end (%d tmp_tds used)\n",i); + /* first mark the control QH element terminated */ + qh_cntrl.element=0xffffffffL; + /* set qh active */ + qh_cntrl.dev_ptr=(unsigned long)dev; + /* fill in tmp_td_chain */ + qh_cntrl.element=swap_32((unsigned long)&tmp_td[0]); + return 0; +} + +/*------------------------------------------------------------------- + * Prepare TDs for bulk transfers. + */ +int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,int transfer_len) +{ + unsigned long destination, status,info; + unsigned long dataptr; + int maxsze = usb_maxpacket(dev, pipe); + int len; + int i=0; + + if(transfer_len < 0) { + printf("Negative transfer length in submit_bulk\n"); + return -1; + } + if (!maxsze) + return -1; + /* The "pipe" thing contains the destination in bits 8--18. */ + destination = (pipe & PIPE_DEVEP_MASK) | usb_packetid (pipe); + /* 3 errors */ + status = (pipe & TD_CTRL_LS) | TD_CTRL_ACTIVE | (3 << 27); + /* ((urb->transfer_flags & USB_DISABLE_SPD) ? 0 : TD_CTRL_SPD) | (3 << 27); */ + /* Build the TDs for the bulk request */ + len = transfer_len; + dataptr = (unsigned long)buffer; + do { + int pktsze = len; + if (pktsze > maxsze) + pktsze = maxsze; + /* pktsze bytes of data */ + info = destination | (((pktsze - 1)&UHCI_NULL_DATA_SIZE) << 21) | + (usb_gettoggle (dev, usb_pipeendpoint (pipe), usb_pipeout (pipe)) << TD_TOKEN_TOGGLE); + + if((len-pktsze)==0) + status |= TD_CTRL_IOC; /* last one generates INT */ + + usb_fill_td(&tmp_td[i],UHCI_PTR_TERM, status, info,dataptr,(unsigned long)dev); /* Status, pktsze bytes of data */ + if(i>0) + tmp_td[i-1].link=swap_32((unsigned long)&tmp_td[i]); + i++; + dataptr += pktsze; + len -= pktsze; + usb_dotoggle (dev, usb_pipeendpoint (pipe), usb_pipeout (pipe)); + } while (len > 0); + /* first mark the bulk QH element terminated */ + qh_bulk.element=0xffffffffL; + /* set qh active */ + qh_bulk.dev_ptr=(unsigned long)dev; + /* fill in tmp_td_chain */ + qh_bulk.element=swap_32((unsigned long)&tmp_td[0]); + return 0; +} + + +/* search a free interrupt td + */ +uhci_td_t *uhci_alloc_int_td(void) +{ + int i; + for(i=0;i<USB_MAX_TEMP_INT_TD;i++) { + if(tmp_int_td[i].dev_ptr==0) /* no device assigned -> free TD */ + return &tmp_int_td[i]; + } + return NULL; +} + +#if 0 +void uhci_show_temp_int_td(void) +{ + int i; + for(i=0;i<USB_MAX_TEMP_INT_TD;i++) { + if((tmp_int_td[i].dev_ptr&0x01)!=0x1L) /* no device assigned -> free TD */ + printf("temp_td %d is assigned to dev %lx\n",i,tmp_int_td[i].dev_ptr); + } + printf("all others temp_tds are free\n"); +} +#endif +/*------------------------------------------------------------------- + * submits USB interrupt (ie. polling ;-) + */ +int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,int transfer_len, int interval) +{ + int nint, n; + unsigned long status, destination; + unsigned long info,tmp; + uhci_td_t *mytd; + if (interval < 0 || interval >= 256) + return -1; + + if (interval == 0) + nint = 0; + else { + for (nint = 0, n = 1; nint <= 8; nint++, n += n) /* round interval down to 2^n */ + { + if(interval < n) { + interval = n / 2; + break; + } + } + nint--; + } + + USB_UHCI_PRINTF("Rounded interval to %i, chain %i\n", interval, nint); + mytd=uhci_alloc_int_td(); + if(mytd==NULL) { + printf("No free INT TDs found\n"); + return -1; + } + status = (pipe & TD_CTRL_LS) | TD_CTRL_ACTIVE | TD_CTRL_IOC | (3 << 27); +/* (urb->transfer_flags & USB_DISABLE_SPD ? 0 : TD_CTRL_SPD) | (3 << 27); +*/ + + destination =(pipe & PIPE_DEVEP_MASK) | usb_packetid (pipe) | (((transfer_len - 1) & 0x7ff) << 21); + + info = destination | (usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe)) << TD_TOKEN_TOGGLE); + tmp = swap_32(td_int[nint].link); + usb_fill_td(mytd,tmp,status, info,(unsigned long)buffer,(unsigned long)dev); + /* Link it */ + tmp = swap_32((unsigned long)mytd); + td_int[nint].link=tmp; + + usb_dotoggle (dev, usb_pipeendpoint (pipe), usb_pipeout (pipe)); + + return 0; +} + +/********************************************************************** + * Low Level functions + */ + + +void reset_hc(void) +{ + + /* Global reset for 100ms */ + out16r( usb_base_addr + USBPORTSC1,0x0204); + out16r( usb_base_addr + USBPORTSC2,0x0204); + out16r( usb_base_addr + USBCMD,USBCMD_GRESET | USBCMD_RS); + /* Turn off all interrupts */ + out16r(usb_base_addr + USBINTR,0); + wait_ms(50); + out16r( usb_base_addr + USBCMD,0); + wait_ms(10); +} + +void start_hc(void) +{ + int timeout = 1000; + + while(in16r(usb_base_addr + USBCMD) & USBCMD_HCRESET) { + if (!--timeout) { + printf("USBCMD_HCRESET timed out!\n"); + break; + } + } + /* Turn on all interrupts */ + out16r(usb_base_addr + USBINTR,USBINTR_TIMEOUT | USBINTR_RESUME | USBINTR_IOC | USBINTR_SP); + /* Start at frame 0 */ + out16r(usb_base_addr + USBFRNUM,0); + /* set Framebuffer base address */ + out32r(usb_base_addr+USBFLBASEADD,(unsigned long)&framelist); + /* Run and mark it configured with a 64-byte max packet */ + out16r(usb_base_addr + USBCMD,USBCMD_RS | USBCMD_CF | USBCMD_MAXP); +} + +/* Initialize the skeleton + */ +void usb_init_skel(void) +{ + unsigned long temp; + int n; + + for(n=0;n<USB_MAX_TEMP_INT_TD;n++) + tmp_int_td[n].dev_ptr=0L; /* no devices connected */ + /* last td */ + usb_fill_td(&td_last,UHCI_PTR_TERM,TD_CTRL_IOC ,0,0,0L); + /* usb_fill_td(&td_last,UHCI_PTR_TERM,0,0,0); */ + /* End Queue Header */ + usb_fill_qh(&qh_end,UHCI_PTR_TERM,(unsigned long)&td_last); + /* Bulk Queue Header */ + temp=(unsigned long)&qh_end; + usb_fill_qh(&qh_bulk,temp | UHCI_PTR_QH,UHCI_PTR_TERM); + /* Control Queue Header */ + temp=(unsigned long)&qh_bulk; + usb_fill_qh(&qh_cntrl, temp | UHCI_PTR_QH,UHCI_PTR_TERM); + /* 1ms Interrupt td */ + temp=(unsigned long)&qh_cntrl; + usb_fill_td(&td_int[0],temp | UHCI_PTR_QH,0,0,0,0L); + temp=(unsigned long)&td_int[0]; + for(n=1; n<8; n++) + usb_fill_td(&td_int[n],temp,0,0,0,0L); + for (n = 0; n < 1024; n++) { + /* link all framelist pointers to one of the interrupts */ + int m, o; + if ((n&127)==127) + framelist[n]= swap_32((unsigned long)&td_int[0]); + else + for (o = 1, m = 2; m <= 128; o++, m += m) + if ((n & (m - 1)) == ((m - 1) / 2)) + framelist[n]= swap_32((unsigned long)&td_int[o]); + } +} + +/* check the common skeleton for completed transfers, and update the status + * of the "connected" device. Called from the IRQ routine. + */ +void usb_check_skel(void) +{ + struct usb_device *dev; + /* start with the control qh */ + if(qh_cntrl.dev_ptr!=0) /* it's a device assigned check if this caused IRQ */ + { + dev=(struct usb_device *)qh_cntrl.dev_ptr; + usb_get_td_status(&tmp_td[0],dev); /* update status */ + if(!(dev->status & USB_ST_NOT_PROC)) { /* is not active anymore, disconnect devices */ + qh_cntrl.dev_ptr=0; + } + } + /* now process the bulk */ + if(qh_bulk.dev_ptr!=0) /* it's a device assigned check if this caused IRQ */ + { + dev=(struct usb_device *)qh_bulk.dev_ptr; + usb_get_td_status(&tmp_td[0],dev); /* update status */ + if(!(dev->status & USB_ST_NOT_PROC)) { /* is not active anymore, disconnect devices */ + qh_bulk.dev_ptr=0; + } + } +} + +/* check the interrupt chain, ubdate the status of the appropriate device, + * call the appropriate irqhandler and reactivate the TD if the irqhandler + * returns with 1 + */ +void usb_check_int_chain(void) +{ + int i,res; + unsigned long link,status; + struct usb_device *dev; + uhci_td_t *td,*prevtd; + + for(i=0;i<8;i++) { + prevtd=&td_int[i]; /* the first previous td is the skeleton td */ + link=swap_32(td_int[i].link) & 0xfffffff0; /* next in chain */ + td=(uhci_td_t *)link; /* assign it */ + /* all interrupt TDs are finally linked to the td_int[0]. + * so we process all until we find the td_int[0]. + * if int0 chain points to a QH, we're also done + */ + while(((i>0) && (link != (unsigned long)&td_int[0])) || + ((i==0) && !(swap_32(td->link) & UHCI_PTR_QH))) + { + /* check if a device is assigned with this td */ + status=swap_32(td->status); + if((td->dev_ptr!=0L) && !(status & TD_CTRL_ACTIVE)) { + /* td is not active and a device is assigned -> call irqhandler */ + dev=(struct usb_device *)td->dev_ptr; + dev->irq_act_len=((status & 0x7FF)==0x7FF) ? 0 : (status & 0x7FF) + 1; /* transfered length */ + dev->irq_status=usb_uhci_td_stat(status); /* get status */ + res=dev->irq_handle(dev); /* call irqhandler */ + if(res==1) { + /* reactivate */ + status|=TD_CTRL_ACTIVE; + td->status=swap_32(status); + prevtd=td; /* previous td = this td */ + } + else { + prevtd->link=td->link; /* link previous td directly to the nex td -> unlinked */ + /* remove device pointer */ + td->dev_ptr=0L; + } + } /* if we call the irq handler */ + link=swap_32(td->link) & 0xfffffff0; /* next in chain */ + td=(uhci_td_t *)link; /* assign it */ + } /* process all td in this int chain */ + } /* next interrupt chain */ +} + + +/* usb interrupt service routine. + */ +void handle_usb_interrupt(void) +{ + unsigned short status; + + /* + * Read the interrupt status, and write it back to clear the + * interrupt cause + */ + + status = in16r(usb_base_addr + USBSTS); + + if (!status) /* shared interrupt, not mine */ + return; + if (status != 1) { + /* remove host controller halted state */ + if ((status&0x20) && ((in16r(usb_base_addr+USBCMD) && USBCMD_RS)==0)) { + out16r(usb_base_addr + USBCMD, USBCMD_RS | in16r(usb_base_addr + USBCMD)); + } + } + usb_check_int_chain(); /* call interrupt handlers for int tds */ + usb_check_skel(); /* call completion handler for common transfer routines */ + out16r(usb_base_addr+USBSTS,status); +} + + +/* init uhci + */ +int usb_lowlevel_init(void) +{ + unsigned char temp; + int busdevfunc; +/* + * HJF - configure IRQ and base from variables optionally. + */ + char *s; + + + busdevfunc=pci_find_device(USB_UHCI_VEND_ID,USB_UHCI_DEV_ID,0); /* get PCI Device ID */ + if(busdevfunc==-1) { + printf("Error USB UHCI (%04X,%04X) not found\n",USB_UHCI_VEND_ID,USB_UHCI_DEV_ID); + return -1; + } + +#if 1 + s = getenv("usb_irq"); + if (s) + { + temp = atoi(s); + pci_write_config_byte(busdevfunc, PCI_INTERRUPT_LINE, temp); + } + else +#endif + pci_read_config_byte(busdevfunc,PCI_INTERRUPT_LINE,&temp); + + s = getenv("usb_base"); + if (s) + { + unsigned long temp2; + temp2 = atoi(s); + pci_write_config_dword(busdevfunc, PCI_BASE_ADDRESS_4, temp2|0x01); + } + + irqvec = temp; + irq_free_handler(irqvec); + USB_UHCI_PRINTF("Interrupt Line = %d\n",irqvec); + pci_read_config_byte(busdevfunc,PCI_INTERRUPT_PIN,&temp); + USB_UHCI_PRINTF("Interrupt Pin = %ld\n",temp); + pci_read_config_dword(busdevfunc,PCI_BASE_ADDRESS_4,&usb_base_addr); + USB_UHCI_PRINTF("IO Base Address = 0x%lx\n",usb_base_addr); + usb_base_addr&=0xFFFFFFF0; + usb_base_addr+=CFG_ISA_IO_BASE_ADDRESS; + rh.devnum = 0; + usb_init_skel(); + reset_hc(); + start_hc(); + irq_install_handler(irqvec, (interrupt_handler_t *)handle_usb_interrupt, NULL); + irq_install_handler(0, (interrupt_handler_t *)handle_usb_interrupt, NULL); + + return 0; +} + +/* stop uhci + */ +int usb_lowlevel_stop(void) +{ + if(irqvec==-1) + return 1; + irq_free_handler(irqvec); + irq_free_handler(0); + reset_hc(); + irqvec=-1; + return 0; +} + +/******************************************************************************************* + * Virtual Root Hub + * Since the uhci does not have a real HUB, we simulate one ;-) + */ +#undef USB_RH_DEBUG + +#ifdef USB_RH_DEBUG +#define USB_RH_PRINTF(fmt,args...) printf (fmt ,##args) +static void usb_display_wValue(unsigned short wValue,unsigned short wIndex); +static void usb_display_Req(unsigned short req); +#else +#define USB_RH_PRINTF(fmt,args...) +static void usb_display_wValue(unsigned short wValue,unsigned short wIndex) {} +static void usb_display_Req(unsigned short req) {} +#endif + +static unsigned char root_hub_dev_des[] = +{ + 0x12, /* __u8 bLength; */ + 0x01, /* __u8 bDescriptorType; Device */ + 0x00, /* __u16 bcdUSB; v1.0 */ + 0x01, + 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */ + 0x00, /* __u8 bDeviceSubClass; */ + 0x00, /* __u8 bDeviceProtocol; */ + 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */ + 0x00, /* __u16 idVendor; */ + 0x00, + 0x00, /* __u16 idProduct; */ + 0x00, + 0x00, /* __u16 bcdDevice; */ + 0x00, + 0x01, /* __u8 iManufacturer; */ + 0x00, /* __u8 iProduct; */ + 0x00, /* __u8 iSerialNumber; */ + 0x01 /* __u8 bNumConfigurations; */ +}; + + +/* Configuration descriptor */ +static unsigned char root_hub_config_des[] = +{ + 0x09, /* __u8 bLength; */ + 0x02, /* __u8 bDescriptorType; Configuration */ + 0x19, /* __u16 wTotalLength; */ + 0x00, + 0x01, /* __u8 bNumInterfaces; */ + 0x01, /* __u8 bConfigurationValue; */ + 0x00, /* __u8 iConfiguration; */ + 0x40, /* __u8 bmAttributes; + Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 4..0: resvd */ + 0x00, /* __u8 MaxPower; */ + + /* interface */ + 0x09, /* __u8 if_bLength; */ + 0x04, /* __u8 if_bDescriptorType; Interface */ + 0x00, /* __u8 if_bInterfaceNumber; */ + 0x00, /* __u8 if_bAlternateSetting; */ + 0x01, /* __u8 if_bNumEndpoints; */ + 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */ + 0x00, /* __u8 if_bInterfaceSubClass; */ + 0x00, /* __u8 if_bInterfaceProtocol; */ + 0x00, /* __u8 if_iInterface; */ + + /* endpoint */ + 0x07, /* __u8 ep_bLength; */ + 0x05, /* __u8 ep_bDescriptorType; Endpoint */ + 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */ + 0x03, /* __u8 ep_bmAttributes; Interrupt */ + 0x08, /* __u16 ep_wMaxPacketSize; 8 Bytes */ + 0x00, + 0xff /* __u8 ep_bInterval; 255 ms */ +}; + + +static unsigned char root_hub_hub_des[] = +{ + 0x09, /* __u8 bLength; */ + 0x29, /* __u8 bDescriptorType; Hub-descriptor */ + 0x02, /* __u8 bNbrPorts; */ + 0x00, /* __u16 wHubCharacteristics; */ + 0x00, + 0x01, /* __u8 bPwrOn2pwrGood; 2ms */ + 0x00, /* __u8 bHubContrCurrent; 0 mA */ + 0x00, /* __u8 DeviceRemovable; *** 7 Ports max *** */ + 0xff /* __u8 PortPwrCtrlMask; *** 7 ports max *** */ +}; + +static unsigned char root_hub_str_index0[] = +{ + 0x04, /* __u8 bLength; */ + 0x03, /* __u8 bDescriptorType; String-descriptor */ + 0x09, /* __u8 lang ID */ + 0x04, /* __u8 lang ID */ +}; + +static unsigned char root_hub_str_index1[] = +{ + 28, /* __u8 bLength; */ + 0x03, /* __u8 bDescriptorType; String-descriptor */ + 'U', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'H', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'C', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'I', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + ' ', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'R', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'o', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'o', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 't', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + ' ', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'H', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'u', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'b', /* __u8 Unicode */ + 0, /* __u8 Unicode */ +}; + + +/* + * Root Hub Control Pipe (interrupt Pipes are not supported) + */ + + +int uhci_submit_rh_msg(struct usb_device *dev, unsigned long pipe, void *buffer,int transfer_len,struct devrequest *cmd) +{ + void *data = buffer; + int leni = transfer_len; + int len = 0; + int status = 0; + int stat = 0; + int i; + + unsigned short cstatus; + + unsigned short bmRType_bReq; + unsigned short wValue; + unsigned short wIndex; + unsigned short wLength; + + if ((pipe & PIPE_INTERRUPT) == PIPE_INTERRUPT) { + printf("Root-Hub submit IRQ: NOT implemented\n"); +#if 0 + uhci->rh.urb = urb; + uhci->rh.send = 1; + uhci->rh.interval = urb->interval; + rh_init_int_timer (urb); +#endif + return 0; + } + bmRType_bReq = cmd->requesttype | cmd->request << 8; + wValue = swap_16(cmd->value); + wIndex = swap_16(cmd->index); + wLength = swap_16(cmd->length); + usb_display_Req(bmRType_bReq); + for (i = 0; i < 8; i++) + rh.c_p_r[i] = 0; + USB_RH_PRINTF("Root-Hub: adr: %2x cmd(%1x): %02x%02x %04x %04x %04x\n", + dev->devnum, 8, cmd->requesttype,cmd->request, wValue, wIndex, wLength); + + switch (bmRType_bReq) { + /* Request Destination: + without flags: Device, + RH_INTERFACE: interface, + RH_ENDPOINT: endpoint, + RH_CLASS means HUB here, + RH_OTHER | RH_CLASS almost ever means HUB_PORT here + */ + + case RH_GET_STATUS: + *(unsigned short *) data = swap_16(1); + len=2; + break; + case RH_GET_STATUS | RH_INTERFACE: + *(unsigned short *) data = swap_16(0); + len=2; + break; + case RH_GET_STATUS | RH_ENDPOINT: + *(unsigned short *) data = swap_16(0); + len=2; + break; + case RH_GET_STATUS | RH_CLASS: + *(unsigned long *) data = swap_32(0); + len=4; + break; /* hub power ** */ + case RH_GET_STATUS | RH_OTHER | RH_CLASS: + + status = in16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1)); + cstatus = ((status & USBPORTSC_CSC) >> (1 - 0)) | + ((status & USBPORTSC_PEC) >> (3 - 1)) | + (rh.c_p_r[wIndex - 1] << (0 + 4)); + status = (status & USBPORTSC_CCS) | + ((status & USBPORTSC_PE) >> (2 - 1)) | + ((status & USBPORTSC_SUSP) >> (12 - 2)) | + ((status & USBPORTSC_PR) >> (9 - 4)) | + (1 << 8) | /* power on ** */ + ((status & USBPORTSC_LSDA) << (-8 + 9)); + + *(unsigned short *) data = swap_16(status); + *(unsigned short *) (data + 2) = swap_16(cstatus); + len=4; + break; + case RH_CLEAR_FEATURE | RH_ENDPOINT: + switch (wValue) { + case (RH_ENDPOINT_STALL): + len=0; + break; + } + break; + + case RH_CLEAR_FEATURE | RH_CLASS: + switch (wValue) { + case (RH_C_HUB_OVER_CURRENT): + len=0; /* hub power over current ** */ + break; + } + break; + + case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS: + usb_display_wValue(wValue,wIndex); + switch (wValue) { + case (RH_PORT_ENABLE): + status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1)); + status = (status & 0xfff5) & ~USBPORTSC_PE; + out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status); + len=0; + break; + case (RH_PORT_SUSPEND): + status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1)); + status = (status & 0xfff5) & ~USBPORTSC_SUSP; + out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status); + len=0; + break; + case (RH_PORT_POWER): + len=0; /* port power ** */ + break; + case (RH_C_PORT_CONNECTION): + status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1)); + status = (status & 0xfff5) | USBPORTSC_CSC; + out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status); + len=0; + break; + case (RH_C_PORT_ENABLE): + status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1)); + status = (status & 0xfff5) | USBPORTSC_PEC; + out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status); + len=0; + break; + case (RH_C_PORT_SUSPEND): +/*** WR_RH_PORTSTAT(RH_PS_PSSC); */ + len=0; + break; + case (RH_C_PORT_OVER_CURRENT): + len=0; + break; + case (RH_C_PORT_RESET): + rh.c_p_r[wIndex - 1] = 0; + len=0; + break; + } + break; + case RH_SET_FEATURE | RH_OTHER | RH_CLASS: + usb_display_wValue(wValue,wIndex); + switch (wValue) { + case (RH_PORT_SUSPEND): + status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1)); + status = (status & 0xfff5) | USBPORTSC_SUSP; + out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status); + len=0; + break; + case (RH_PORT_RESET): + status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1)); + status = (status & 0xfff5) | USBPORTSC_PR; + out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status); + wait_ms(10); + status = (status & 0xfff5) & ~USBPORTSC_PR; + out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status); + udelay(10); + status = (status & 0xfff5) | USBPORTSC_PE; + out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status); + wait_ms(10); + status = (status & 0xfff5) | 0xa; + out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status); + len=0; + break; + case (RH_PORT_POWER): + len=0; /* port power ** */ + break; + case (RH_PORT_ENABLE): + status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1)); + status = (status & 0xfff5) | USBPORTSC_PE; + out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status); + len=0; + break; + } + break; + + case RH_SET_ADDRESS: + rh.devnum = wValue; + len=0; + break; + case RH_GET_DESCRIPTOR: + switch ((wValue & 0xff00) >> 8) { + case (0x01): /* device descriptor */ + i=sizeof(root_hub_config_des); + status=i > wLength ? wLength : i; + len = leni > status ? status : leni; + memcpy (data, root_hub_dev_des, len); + break; + case (0x02): /* configuration descriptor */ + i=sizeof(root_hub_config_des); + status=i > wLength ? wLength : i; + len = leni > status ? status : leni; + memcpy (data, root_hub_config_des, len); + break; + case (0x03): /*string descriptors */ + if(wValue==0x0300) { + i=sizeof(root_hub_str_index0); + status = i > wLength ? wLength : i; + len = leni > status ? status : leni; + memcpy (data, root_hub_str_index0, len); + break; + } + if(wValue==0x0301) { + i=sizeof(root_hub_str_index1); + status = i > wLength ? wLength : i; + len = leni > status ? status : leni; + memcpy (data, root_hub_str_index1, len); + break; + } + stat = USB_ST_STALLED; + } + break; + + case RH_GET_DESCRIPTOR | RH_CLASS: + root_hub_hub_des[2] = 2; + i=sizeof(root_hub_hub_des); + status= i > wLength ? wLength : i; + len = leni > status ? status : leni; + memcpy (data, root_hub_hub_des, len); + break; + case RH_GET_CONFIGURATION: + *(unsigned char *) data = 0x01; + len = 1; + break; + case RH_SET_CONFIGURATION: + len=0; + break; + default: + stat = USB_ST_STALLED; + } + USB_RH_PRINTF("Root-Hub stat %lx port1: %x port2: %x\n\n",stat, + in16r(usb_base_addr + USBPORTSC1), in16r(usb_base_addr + USBPORTSC2)); + dev->act_len=len; + dev->status=stat; + return stat; + +} + +/******************************************************************************** + * Some Debug Routines + */ + +#ifdef USB_RH_DEBUG + +static void usb_display_Req(unsigned short req) +{ + USB_RH_PRINTF("- Root-Hub Request: "); + switch (req) { + case RH_GET_STATUS: + USB_RH_PRINTF("Get Status "); + break; + case RH_GET_STATUS | RH_INTERFACE: + USB_RH_PRINTF("Get Status Interface "); + break; + case RH_GET_STATUS | RH_ENDPOINT: + USB_RH_PRINTF("Get Status Endpoint "); + break; + case RH_GET_STATUS | RH_CLASS: + USB_RH_PRINTF("Get Status Class"); + break; /* hub power ** */ + case RH_GET_STATUS | RH_OTHER | RH_CLASS: + USB_RH_PRINTF("Get Status Class Others"); + break; + case RH_CLEAR_FEATURE | RH_ENDPOINT: + USB_RH_PRINTF("Clear Feature Endpoint "); + break; + case RH_CLEAR_FEATURE | RH_CLASS: + USB_RH_PRINTF("Clear Feature Class "); + break; + case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS: + USB_RH_PRINTF("Clear Feature Other Class "); + break; + case RH_SET_FEATURE | RH_OTHER | RH_CLASS: + USB_RH_PRINTF("Set Feature Other Class "); + break; + case RH_SET_ADDRESS: + USB_RH_PRINTF("Set Address "); + break; + case RH_GET_DESCRIPTOR: + USB_RH_PRINTF("Get Descriptor "); + break; + case RH_GET_DESCRIPTOR | RH_CLASS: + USB_RH_PRINTF("Get Descriptor Class "); + break; + case RH_GET_CONFIGURATION: + USB_RH_PRINTF("Get Configuration "); + break; + case RH_SET_CONFIGURATION: + USB_RH_PRINTF("Get Configuration "); + break; + default: + USB_RH_PRINTF("****UNKNOWN**** 0x%04X ",req); + } + USB_RH_PRINTF("\n"); + +} + +static void usb_display_wValue(unsigned short wValue,unsigned short wIndex) +{ + switch (wValue) { + case (RH_PORT_ENABLE): + USB_RH_PRINTF("Root-Hub: Enable Port %d\n",wIndex); + break; + case (RH_PORT_SUSPEND): + USB_RH_PRINTF("Root-Hub: Suspend Port %d\n",wIndex); + break; + case (RH_PORT_POWER): + USB_RH_PRINTF("Root-Hub: Port Power %d\n",wIndex); + break; + case (RH_C_PORT_CONNECTION): + USB_RH_PRINTF("Root-Hub: C Port Connection Port %d\n",wIndex); + break; + case (RH_C_PORT_ENABLE): + USB_RH_PRINTF("Root-Hub: C Port Enable Port %d\n",wIndex); + break; + case (RH_C_PORT_SUSPEND): + USB_RH_PRINTF("Root-Hub: C Port Suspend Port %d\n",wIndex); + break; + case (RH_C_PORT_OVER_CURRENT): + USB_RH_PRINTF("Root-Hub: C Port Over Current Port %d\n",wIndex); + break; + case (RH_C_PORT_RESET): + USB_RH_PRINTF("Root-Hub: C Port reset Port %d\n",wIndex); + break; + default: + USB_RH_PRINTF("Root-Hub: unknown %x %x\n",wValue,wIndex); + break; + } +} + +#endif + + + +#ifdef USB_UHCI_DEBUG + +static int usb_display_td(uhci_td_t *td) +{ + unsigned long tmp; + int valid; + + printf("TD at %p:\n",td); + + tmp=swap_32(td->link); + printf("Link points to 0x%08lX, %s first, %s, %s\n",tmp&0xfffffff0, + ((tmp & 0x4)==0x4) ? "Depth" : "Breath", + ((tmp & 0x2)==0x2) ? "QH" : "TD", + ((tmp & 0x1)==0x1) ? "invalid" : "valid"); + valid=((tmp & 0x1)==0x0); + tmp=swap_32(td->status); + printf(" %s %ld Errors %s %s %s \n %s %s %s %s %s %s\n Len 0x%lX\n", + (((tmp>>29)&0x1)==0x1) ? "SPD Enable" : "SPD Disable", + ((tmp>>28)&0x3), + (((tmp>>26)&0x1)==0x1) ? "Low Speed" : "Full Speed", + (((tmp>>25)&0x1)==0x1) ? "ISO " : "", + (((tmp>>24)&0x1)==0x1) ? "IOC " : "", + (((tmp>>23)&0x1)==0x1) ? "Active " : "Inactive ", + (((tmp>>22)&0x1)==0x1) ? "Stalled" : "", + (((tmp>>21)&0x1)==0x1) ? "Data Buffer Error" : "", + (((tmp>>20)&0x1)==0x1) ? "Babble" : "", + (((tmp>>19)&0x1)==0x1) ? "NAK" : "", + (((tmp>>18)&0x1)==0x1) ? "Bitstuff Error" : "", + (tmp&0x7ff)); + tmp=swap_32(td->info); + printf(" MaxLen 0x%lX\n",((tmp>>21)&0x7FF)); + printf(" %s Endpoint 0x%lX Dev Addr 0x%lX PID 0x%lX\n",((tmp>>19)&0x1)==0x1 ? "TOGGLE" : "", + ((tmp>>15)&0xF),((tmp>>8)&0x7F),tmp&0xFF); + tmp=swap_32(td->buffer); + printf(" Buffer 0x%08lX\n",tmp); + printf(" DEV %08lX\n",td->dev_ptr); + return valid; +} + + +void usb_show_td(int max) +{ + int i; + if(max>0) { + for(i=0;i<max;i++) { + usb_display_td(&tmp_td[i]); + } + } + else { + i=0; + do { + printf("tmp_td[%d]\n",i); + }while(usb_display_td(&tmp_td[i++])); + } +} + + +#endif +#endif /* CONFIG_USB_UHCI */ + +/* EOF */ diff --git a/board/MAI/AmigaOneG3SE/usb_uhci.h b/board/MAI/AmigaOneG3SE/usb_uhci.h new file mode 100644 index 00000000000..7fda60b6a15 --- /dev/null +++ b/board/MAI/AmigaOneG3SE/usb_uhci.h @@ -0,0 +1,194 @@ +/* + * (C) Copyright 2001 + * Denis Peter, MPL AG Switzerland + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Note: Part of this code has been derived from linux + * + */ +#ifndef _USB_UHCI_H_ +#define _USB_UHCI_H_ + +#undef USB_UHCI_VEND_ID +#define USB_UHCI_VEND_ID PCI_VENDOR_ID_VIA +#undef USB_UHCI_DEV_ID +#define USB_UHCI_DEV_ID 0x3038 + +/* Command register */ +#define USBCMD 0 +#define USBCMD_RS 0x0001 /* Run/Stop */ +#define USBCMD_HCRESET 0x0002 /* Host reset */ +#define USBCMD_GRESET 0x0004 /* Global reset */ +#define USBCMD_EGSM 0x0008 /* Global Suspend Mode */ +#define USBCMD_FGR 0x0010 /* Force Global Resume */ +#define USBCMD_SWDBG 0x0020 /* SW Debug mode */ +#define USBCMD_CF 0x0040 /* Config Flag (sw only) */ +#define USBCMD_MAXP 0x0080 /* Max Packet (0 = 32, 1 = 64) */ + +/* Status register */ +#define USBSTS 2 +#define USBSTS_USBINT 0x0001 /* Interrupt due to IOC */ +#define USBSTS_ERROR 0x0002 /* Interrupt due to error */ +#define USBSTS_RD 0x0004 /* Resume Detect */ +#define USBSTS_HSE 0x0008 /* Host System Error - basically PCI problems */ +#define USBSTS_HCPE 0x0010 /* Host Controller Process Error - the scripts were buggy */ +#define USBSTS_HCH 0x0020 /* HC Halted */ + +/* Interrupt enable register */ +#define USBINTR 4 +#define USBINTR_TIMEOUT 0x0001 /* Timeout/CRC error enable */ +#define USBINTR_RESUME 0x0002 /* Resume interrupt enable */ +#define USBINTR_IOC 0x0004 /* Interrupt On Complete enable */ +#define USBINTR_SP 0x0008 /* Short packet interrupt enable */ + +#define USBFRNUM 6 +#define USBFLBASEADD 8 +#define USBSOF 12 + +/* USB port status and control registers */ +#define USBPORTSC1 16 +#define USBPORTSC2 18 +#define USBPORTSC_CCS 0x0001 /* Current Connect Status ("device present") */ +#define USBPORTSC_CSC 0x0002 /* Connect Status Change */ +#define USBPORTSC_PE 0x0004 /* Port Enable */ +#define USBPORTSC_PEC 0x0008 /* Port Enable Change */ +#define USBPORTSC_LS 0x0030 /* Line Status */ +#define USBPORTSC_RD 0x0040 /* Resume Detect */ +#define USBPORTSC_LSDA 0x0100 /* Low Speed Device Attached */ +#define USBPORTSC_PR 0x0200 /* Port Reset */ +#define USBPORTSC_SUSP 0x1000 /* Suspend */ + +/* Legacy support register */ +#define USBLEGSUP 0xc0 +#define USBLEGSUP_DEFAULT 0x2000 /* only PIRQ enable set */ + +#define UHCI_NULL_DATA_SIZE 0x7ff /* for UHCI controller TD */ +#define UHCI_PID 0xff /* PID MASK */ + +#define UHCI_PTR_BITS 0x000F +#define UHCI_PTR_TERM 0x0001 +#define UHCI_PTR_QH 0x0002 +#define UHCI_PTR_DEPTH 0x0004 + +/* for TD <status>: */ +#define TD_CTRL_SPD (1 << 29) /* Short Packet Detect */ +#define TD_CTRL_C_ERR_MASK (3 << 27) /* Error Counter bits */ +#define TD_CTRL_LS (1 << 26) /* Low Speed Device */ +#define TD_CTRL_IOS (1 << 25) /* Isochronous Select */ +#define TD_CTRL_IOC (1 << 24) /* Interrupt on Complete */ +#define TD_CTRL_ACTIVE (1 << 23) /* TD Active */ +#define TD_CTRL_STALLED (1 << 22) /* TD Stalled */ +#define TD_CTRL_DBUFERR (1 << 21) /* Data Buffer Error */ +#define TD_CTRL_BABBLE (1 << 20) /* Babble Detected */ +#define TD_CTRL_NAK (1 << 19) /* NAK Received */ +#define TD_CTRL_CRCTIMEO (1 << 18) /* CRC/Time Out Error */ +#define TD_CTRL_BITSTUFF (1 << 17) /* Bit Stuff Error */ +#define TD_CTRL_ACTLEN_MASK 0x7ff /* actual length, encoded as n - 1 */ + +#define TD_CTRL_ANY_ERROR (TD_CTRL_STALLED | TD_CTRL_DBUFERR | \ + TD_CTRL_BABBLE | TD_CTRL_CRCTIME | TD_CTRL_BITSTUFF) + +#define TD_TOKEN_TOGGLE 19 + +/* ------------------------------------------------------------------------------------ + Virtual Root HUB + ------------------------------------------------------------------------------------ */ +/* destination of request */ +#define RH_INTERFACE 0x01 +#define RH_ENDPOINT 0x02 +#define RH_OTHER 0x03 + +#define RH_CLASS 0x20 +#define RH_VENDOR 0x40 + +/* Requests: bRequest << 8 | bmRequestType */ +#define RH_GET_STATUS 0x0080 +#define RH_CLEAR_FEATURE 0x0100 +#define RH_SET_FEATURE 0x0300 +#define RH_SET_ADDRESS 0x0500 +#define RH_GET_DESCRIPTOR 0x0680 +#define RH_SET_DESCRIPTOR 0x0700 +#define RH_GET_CONFIGURATION 0x0880 +#define RH_SET_CONFIGURATION 0x0900 +#define RH_GET_STATE 0x0280 +#define RH_GET_INTERFACE 0x0A80 +#define RH_SET_INTERFACE 0x0B00 +#define RH_SYNC_FRAME 0x0C80 +/* Our Vendor Specific Request */ +#define RH_SET_EP 0x2000 + +/* Hub port features */ +#define RH_PORT_CONNECTION 0x00 +#define RH_PORT_ENABLE 0x01 +#define RH_PORT_SUSPEND 0x02 +#define RH_PORT_OVER_CURRENT 0x03 +#define RH_PORT_RESET 0x04 +#define RH_PORT_POWER 0x08 +#define RH_PORT_LOW_SPEED 0x09 +#define RH_C_PORT_CONNECTION 0x10 +#define RH_C_PORT_ENABLE 0x11 +#define RH_C_PORT_SUSPEND 0x12 +#define RH_C_PORT_OVER_CURRENT 0x13 +#define RH_C_PORT_RESET 0x14 + +/* Hub features */ +#define RH_C_HUB_LOCAL_POWER 0x00 +#define RH_C_HUB_OVER_CURRENT 0x01 + +#define RH_DEVICE_REMOTE_WAKEUP 0x00 +#define RH_ENDPOINT_STALL 0x01 + +/* Our Vendor Specific feature */ +#define RH_REMOVE_EP 0x00 + + +#define RH_ACK 0x01 +#define RH_REQ_ERR -1 +#define RH_NACK 0x00 + + +/* Transfer descriptor structure */ +typedef struct { + unsigned long link; /* next td/qh (LE)*/ + unsigned long status; /* status of the td */ + unsigned long info; /* Max Lenght / Endpoint / device address and PID */ + unsigned long buffer; /* pointer to data buffer (LE) */ + unsigned long dev_ptr; /* pointer to the assigned device (BE) */ + unsigned long res[3]; /* reserved (TDs must be 8Byte aligned) */ +} uhci_td_t, *puhci_td_t; + +/* Queue Header structure */ +typedef struct { + unsigned long head; /* Next QH (LE)*/ + unsigned long element; /* Queue element pointer (LE) */ + unsigned long res[5]; /* reserved */ + unsigned long dev_ptr; /* if 0 no tds have been assigned to this qh */ +} uhci_qh_t, *puhci_qh_t; + +struct virt_root_hub { + int devnum; /* Address of Root Hub endpoint */ + int numports; /* number of ports */ + int c_p_r[8]; /* C_PORT_RESET */ +}; + + +#endif /* _USB_UHCI_H_ */ + + diff --git a/board/MAI/AmigaOneG3SE/via686.c b/board/MAI/AmigaOneG3SE/via686.c new file mode 100644 index 00000000000..0483ca9fbdf --- /dev/null +++ b/board/MAI/AmigaOneG3SE/via686.c @@ -0,0 +1,299 @@ +/* + * (C) Copyright 2002 + * Hyperion Entertainment, Hans-JoergF@hyperion-entertainment.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <pci.h> +#include <ata.h> +#include "memio.h" +#include "articiaS.h" +#include "via686.h" +#include "i8259.h" + +#undef VIA_DEBUG + +#ifdef VIA_DEBUG +#define PRINTF(fmt,args...) printf (fmt ,##args) +#else +#define PRINTF(fmt,args...) +#endif + + +/* Setup the ISA-to-PCI host bridge */ +void via_isa_init(pci_dev_t dev, struct pci_config_table *table) +{ + char regval; + if (PCI_FUNC(dev) == 0) + { + PRINTF("... PCI-to-ISA bridge, dev=0x%X\n", dev); + + /* Enable I/O Recovery time */ + pci_write_config_byte(dev, 0x40, 0x08); + + /* Enable ISA refresh */ + pci_write_config_byte(dev, 0x41, 0x41); /* was 01 */ + + /* Enable ISA line buffer */ + pci_write_config_byte(dev, 0x45, 0x80); + + /* Gate INTR, and flush line buffer */ + pci_write_config_byte(dev, 0x46, 0x60); + + /* Enable EISA ports 4D0/4D1. Do we need this ? */ + pci_write_config_byte(dev, 0x47, 0xe6); /* was 20 */ + + /* 512 K PCI Decode */ + pci_write_config_byte(dev, 0x48, 0x01); + + /* Wait for PGNT before grant to ISA Master/DMA */ + /* ports 0-FF to SDBus */ + /* IRQ 14 and 15 for ide 0/1 */ + pci_write_config_byte(dev, 0x4a, 0x04); /* Was c4 */ + + /* Plug'n'Play */ + /* Parallel DRQ 3, Floppy DRQ 2 (default) */ + pci_write_config_byte(dev, 0x50, 0x0e); + + /* IRQ Routing for Floppy and Parallel port */ + /* IRQ 6 for floppy, IRQ 7 for parallel port */ + pci_write_config_byte(dev, 0x51, 0x76); + + /* IRQ Routing for serial ports (take IRQ 3 and 4) */ + pci_write_config_byte(dev, 0x52, 0x34); + + /* All IRQ's level triggered. */ + pci_write_config_byte(dev, 0x54, 0x00); + + /* PCI IRQ's all at IRQ 9 */ + pci_write_config_byte(dev, 0x55, 0x90); + pci_write_config_byte(dev, 0x56, 0x99); + pci_write_config_byte(dev, 0x57, 0x90); + + /* Enable Keyboard */ + pci_read_config_byte(dev, 0x5A, ®val); + regval |= 0x01; + pci_write_config_byte(dev, 0x5A, regval); + + pci_write_config_byte(dev, 0x80, 0); + pci_write_config_byte(dev, 0x85, 0x01); + +/* pci_write_config_byte(dev, 0x77, 0x00); */ + } +} + +/* + * Initialize PNP irq routing + */ + +void via_init_irq_routing(uint8 irq_map[]) +{ + char *s; + uint8 level_edge_bits = 0xf; + + /* Set irq routings */ + pci_write_cfg_byte(0, 7<<3, 0x55, irq_map[0]<<4); + pci_write_cfg_byte(0, 7<<3, 0x56, irq_map[1] | irq_map[2]<<4); + pci_write_cfg_byte(0, 7<<3, 0x57, irq_map[3]<<4); + + /* + * Gather level/edge bits + * Default is to assume level triggered + */ + + s = getenv("pci_irqa_select"); + if (s && strcmp(s, "level") == 0) + level_edge_bits &= ~0x01; + + s = getenv("pci_irqb_select"); + if (s && strcmp(s, "level") == 0) + level_edge_bits &= ~0x02; + + s = getenv("pci_irqc_select"); + if (s && strcmp(s, "level") == 0) + level_edge_bits &= ~0x04; + + s = getenv("pci_irqd_select"); + if (s && strcmp(s, "level") == 0) + level_edge_bits &= ~0x08; + + PRINTF("IRQ map\n"); + PRINTF("%d: %s\n", irq_map[0], level_edge_bits&0x1 ? "edge" : "level"); + PRINTF("%d: %s\n", irq_map[1], level_edge_bits&0x2 ? "edge" : "level"); + PRINTF("%d: %s\n", irq_map[2], level_edge_bits&0x4 ? "edge" : "level"); + PRINTF("%d: %s\n", irq_map[3], level_edge_bits&0x8 ? "edge" : "level"); + pci_write_cfg_byte(0, 7<<3, 0x54, level_edge_bits); + + PRINTF("%02x %02x %02x %02x\n", pci_read_cfg_byte(0, 7<<3, 0x54), + pci_read_cfg_byte(0, 7<<3, 0x55), pci_read_cfg_byte(0, 7<<3, 0x56), + pci_read_cfg_byte(0, 7<<3, 0x57)); +} + + +/* Setup the IDE controller. This doesn't seem to work yet. I/O to an IDE controller port */ +/* always return the last character output on the serial port (!) */ +/* This function is called by the pnp-library when it encounters 0:7:1 */ +void via_cfgfunc_ide_init(struct pci_controller *host, pci_dev_t dev, struct pci_config_table *table) +{ + PRINTF("... IDE controller, dev=0x%X\n", dev); + + /* Enable both IDE channels. */ + pci_write_config_byte(dev, 0x40, 0x03); + /* udelay(10000); */ + /* udelay(10000); */ + + /* Enable IO Space */ + pci_write_config_word(dev, 0x04, 0x03); + + /* Set to compatibility mode */ + pci_write_config_byte(dev, 0x09, 0x8A); /* WAS: 0x8f); */ + + /* Set to legacy interrupt mode */ + pci_write_config_byte(dev, 0x3d, 0x00); /* WAS: 0x01); */ + +} + + +/* Set the base address of the floppy controller to 0x3F0 */ +void via_fdc_init(pci_dev_t dev) +{ + unsigned char c; + /* Enable Configuration mode */ + pci_read_config_byte(dev, 0x85, &c); + c |= 0x02; + pci_write_config_byte(dev, 0x85, c); + + /* Set floppy controller port to 0x3F0. */ + SIO_WRITE_CONFIG(0xE3, (0x3F<<2)); + + /* Enable floppy controller */ + SIO_READ_CONFIG(0xE2, c); + c |= 0x10; + SIO_WRITE_CONFIG(0xE2, c); + + /* Switch of configuration mode */ + pci_read_config_byte(dev, 0x85, &c); + c &= ~0x02; + pci_write_config_byte(dev, 0x85, c); +} + +/* Init function 0 of the via southbridge. Called by the pnp-library */ +void via_cfgfunc_via686(struct pci_controller *host, pci_dev_t dev, struct pci_config_table *table) +{ + if (PCI_FUNC(dev) == 0) + { + /* FIXME: Try to generate a PCI reset */ + /* unsigned char c; */ + /* pci_read_config_byte(dev, 0x47, &c); */ + /* pci_write_config_byte(dev, 0x47, c | 0x01); */ + + via_isa_init(dev, table); + via_fdc_init(dev); + } +} + +__asm (" .globl via_calibrate_time_base \n" + "via_calibrate_time_base: \n" + " lis 9, 0xfe00 \n" + " li 0, 0x00 \n" + " mttbu 0 \n" + " mttbl 0 \n" + "ctb_loop: \n" + " lbz 0, 0x61(9) \n" + " eieio \n" + " andi. 0, 0, 0x20 \n" + " beq ctb_loop \n" + "ctb_done: \n" + " mftb 3 \n" + " blr"); + +extern unsigned long via_calibrate_time_base(void); + +void via_calibrate_bus_freq(void) +{ + DECLARE_GLOBAL_DATA_PTR; + + unsigned long tb; + + /* This is 20 microseconds */ + #define CALIBRATE_TIME 28636 + + + /* Enable the timer (and disable speaker) */ + unsigned char c; + c = in_byte(0x61); + out_byte(0x61, ((c & ~0x02) | 0x01)); + + /* Set timer 2 to low/high writing */ + out_byte(0x43, 0xb0); + out_byte(0x42, CALIBRATE_TIME & 0xff); + out_byte(0x42, CALIBRATE_TIME >>8); + + /* Read the time base */ + tb = via_calibrate_time_base(); + + if (tb >= 700000) + gd->bus_clk = 133333333; + else + gd->bus_clk = 100000000; + +} + + +void ide_led(uchar led, uchar status) +{ +/* unsigned char c = in_byte(0x92); */ + +/* if (!status) */ +/* out_byte(0x92, c | 0xC0); */ +/* else */ +/* out_byte(0x92, c & ~0xC0); */ +} + + +void via_init_afterscan(void) +{ + /* Modify IDE controller setup */ + pci_write_cfg_byte(0, 7<<3|1, PCI_LATENCY_TIMER, 0x20); + pci_write_cfg_byte(0, 7<<3|1, PCI_COMMAND, PCI_COMMAND_IO|PCI_COMMAND_MEMORY|PCI_COMMAND_MASTER); + pci_write_cfg_byte(0, 7<<3|1, PCI_INTERRUPT_LINE, 0xff); + pci_write_cfg_byte(0, 7<<3|1, 0x40, 0x0b); /* FIXME: Might depend on drives connected */ + pci_write_cfg_byte(0, 7<<3|1, 0x41, 0x42); /* FIXME: Might depend on drives connected */ + pci_write_cfg_byte(0, 7<<3|1, 0x43, 0x05); + pci_write_cfg_byte(0, 7<<3|1, 0x44, 0x18); + pci_write_cfg_byte(0, 7<<3|1, 0x45, 0x10); + pci_write_cfg_byte(0, 7<<3|1, 0x4e, 0x22); /* FIXME: Not documented, but set in PC bios */ + pci_write_cfg_byte(0, 7<<3|1, 0x4f, 0x20); /* FIXME: Not documented */ + + /* Modify some values in the USB controller */ + pci_write_cfg_byte(0, 7<<3|2, 0x05, 0x17); + pci_write_cfg_byte(0, 7<<3|2, 0x06, 0x01); + pci_write_cfg_byte(0, 7<<3|2, 0x41, 0x12); + pci_write_cfg_byte(0, 7<<3|2, 0x42, 0x03); + pci_write_cfg_byte(0, 7<<3|2, PCI_LATENCY_TIMER, 0x40); + + pci_write_cfg_byte(0, 7<<3|3, 0x05, 0x17); + pci_write_cfg_byte(0, 7<<3|3, 0x06, 0x01); + pci_write_cfg_byte(0, 7<<3|3, 0x41, 0x12); + pci_write_cfg_byte(0, 7<<3|3, 0x42, 0x03); + pci_write_cfg_byte(0, 7<<3|3, PCI_LATENCY_TIMER, 0x40); + + +} diff --git a/board/MAI/AmigaOneG3SE/via686.h b/board/MAI/AmigaOneG3SE/via686.h new file mode 100644 index 00000000000..2a06a05e16d --- /dev/null +++ b/board/MAI/AmigaOneG3SE/via686.h @@ -0,0 +1,29 @@ +#ifndef VIA686_H_ +#define VIA686_H_ + + +#define CMOS_ADDR 0x70 +#define CMOS_DATA 0x71 + +#define I8259_MASTER_CONTROL 0x20 +#define I8259_MASTER_MASK 0x21 + +#define I8259_SLAVE_CONTROL 0xA0 +#define I8259_SLAVE_MASK 0xA1 + +#define SIO_CONFIG_ADDR 0x3F0 +#define SIO_CONFIG_DATA 0x3F1 + +#define SIO_WRITE_CONFIG(addr, byte) \ + out_byte(SIO_CONFIG_ADDR, addr); \ + out_byte(SIO_CONFIG_DATA, byte); + +#define SIO_READ_CONFIG(addr, byte) \ + out_byte(SIO_CONFIG_ADDR, addr); \ + byte = in_byte(SIO_CONFIG_DATA); + +void via_init(void); + +void via_calibrate_bus_freq(void); + +#endif diff --git a/board/MAI/AmigaOneG3SE/video.c b/board/MAI/AmigaOneG3SE/video.c new file mode 100644 index 00000000000..d0e366c2ed5 --- /dev/null +++ b/board/MAI/AmigaOneG3SE/video.c @@ -0,0 +1,539 @@ +/* + * (C) Copyright 2002 + * Hyperion Entertainment, Hans-JoergF@hyperion-entertainment.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <devices.h> +#include "memio.h" +#include <part.h> + +unsigned char *cursor_position; +unsigned int cursor_row; +unsigned int cursor_col; + +unsigned char current_attr; + +unsigned int video_numrows = 25; +unsigned int video_numcols = 80; +unsigned int video_scrolls = 0; + +#define VIDEO_BASE (unsigned char *)0xFD0B8000 +#define VIDEO_ROWS video_numrows +#define VIDEO_COLS video_numcols +#define VIDEO_PITCH (2 * video_numcols) +#define VIDEO_SIZE (video_numrows * video_numcols * 2) +#define VIDEO_NAME "vga" + +void video_test(void); +void video_putc(char ch); +void video_puts(char *string); +void video_scroll(int rows); +void video_banner(void); +int video_init(void); +int video_start(void); +int video_rows(void); +int video_cols(void); + +char *prompt_string = "=>"; + +void video_set_color(unsigned char attr) +{ + unsigned char *fb = (unsigned char *)VIDEO_BASE; + int i; + + current_attr = video_get_attr(); + + for (i=0; i<VIDEO_SIZE; i+=2) + { + *(fb+i+1) = current_attr; + } +} + +unsigned char video_get_attr(void) +{ + char *s; + unsigned char attr; + + attr = 0x0f; + + s = getenv("vga_fg_color"); + if (s) + { + attr = atoi(s); + } + + s = getenv("vga_bg_color"); + if (s) + { + attr |= atoi(s)<<4; + } + + return attr; +} + +int video_inited = 0; + +int drv_video_init(void) +{ + int error, devices = 1 ; + device_t vgadev ; + if (video_inited) return 1; + video_inited = 1; + video_init(); + memset (&vgadev, 0, sizeof(vgadev)); + + strcpy(vgadev.name, VIDEO_NAME); + vgadev.flags = DEV_FLAGS_OUTPUT | DEV_FLAGS_SYSTEM; + vgadev.putc = video_putc; + vgadev.puts = video_puts; + vgadev.getc = NULL; + vgadev.tstc = NULL; + vgadev.start = video_start; + + error = device_register (&vgadev); + + if (error == 0) + { + char *s = getenv("stdout"); + if (s && strcmp(s, VIDEO_NAME)==0) + { + if (overwrite_console()) return 1; + error = console_assign(stdout, VIDEO_NAME); + if (error == 0) return 1; + else return error; + } + return 1; + } + + return error; +} + +int video_init(void) +{ + cursor_position = VIDEO_BASE; // Color text display base + cursor_row = 0; + cursor_col = 0; + current_attr = video_get_attr(); // Currently selected value for attribute. +// video_test(); + video_set_color(current_attr); + + return 0; +} + +void video_set_cursor(int line, int column) +{ + unsigned short offset = line*video_numcols + column; + cursor_position = VIDEO_BASE + line*VIDEO_PITCH + column*2; + out_byte(0x3D4, 0x0E); + out_byte(0x3D5, offset/256); + out_byte(0x3D4, 0x0F); + out_byte(0x3D5, offset%256); +} + +void video_write_char(int character) +{ + *cursor_position = character; + *(cursor_position+1) = current_attr; +} + +void video_test(void) +{ + +} + +void video_putc(char ch) +{ + switch(ch) + { + case '\n': + cursor_col = 0; + cursor_row += 1; + break; + case '\r': + cursor_col = 0; + break; + case '\b': + if (cursor_col) cursor_col--; + else return; + break; + case '\t': + cursor_col = (cursor_col/8+1)*8; + break; + default: + video_write_char(ch); + cursor_col++; + if (cursor_col > VIDEO_COLS-1) + { + cursor_row++; + cursor_col=0; + } + } + + if (cursor_row > VIDEO_ROWS-1) + video_scroll(1); + video_set_cursor(cursor_row, cursor_col); +} + +void video_scroll(int rows) +{ + unsigned short clear = ((unsigned short)current_attr) | (' '<<8); + unsigned short* addr16 = &((unsigned short *)VIDEO_BASE)[(VIDEO_ROWS-rows)*VIDEO_COLS]; + int i; + char *s; + + s = getenv("vga_askscroll"); + video_scrolls += rows; + + if (video_scrolls >= video_numrows) + { + if (s && strcmp(s, "yes")) + { + while (-1 == tstc()); + } + + video_scrolls = 0; + } + + + memcpy(VIDEO_BASE, VIDEO_BASE+rows*(VIDEO_COLS*2), (VIDEO_ROWS-rows)*(VIDEO_COLS*2)); + for (i = 0 ; i < rows * VIDEO_COLS ; i++) + addr16[i] = clear; + cursor_row-=rows; + cursor_col=0; +} + +void video_puts(char *string) +{ + while (*string) + { + video_putc(*string); + string++; + } +} + +int video_start(void) +{ + return 0; +} + +unsigned char video_single_box[] = +{ + 218, 196, 191, + 179, 179, + 192, 196, 217 +}; + +unsigned char video_double_box[] = +{ + 201, 205, 187, + 186, 186, + 200, 205, 188 +}; + +unsigned char video_single_title[] = +{ + 195, 196, 180, 180, 195 +}; + +unsigned char video_double_title[] = +{ + 204, 205, 185, 181, 198 +}; + +#define SINGLE_BOX 0 +#define DOUBLE_BOX 1 + +unsigned char *video_addr(int x, int y) +{ + return VIDEO_BASE + 2*(VIDEO_COLS*y) + 2*x; +} + +void video_bios_print_string(char *s, int x, int y, int attr, int count) +{ + int cattr = current_attr; + if (attr != -1) current_attr = attr; + video_set_cursor(x,y); + while (count) + { + char c = *s++; + if (attr == -1) current_attr = *s++; + video_putc(c); + count--; + } +} + +void video_draw_box(int style, int attr, char *title, int separate, int x, int y, int w, int h) +{ + unsigned char *fb, *fb2; + unsigned char *st = (style == SINGLE_BOX)?video_single_box : video_double_box; + unsigned char *ti = (style == SINGLE_BOX)?video_single_title : video_double_title; + int i; + + fb = video_addr(x,y); + *(fb) = st[0]; + *(fb+1) = attr; + fb += 2; + + fb2 = video_addr(x,y+h-1); + *(fb2) = st[5]; + *(fb2+1) = attr; + fb2 += 2; + + for (i=0; i<w-2;i++) + { + *fb = st[1]; + fb++; + *fb = attr; + fb++; + + *fb2 = st[6]; + fb2++; + *fb2 = attr; + fb2++; + + } + *fb = st[2]; + *(fb+1) = attr; + + *fb2 = st[7]; + *(fb2+1) = attr; + + fb = video_addr(x, y+1); + fb2 = video_addr(x+w-1, y+1); + for (i=0; i<h-2; i++) + { + *fb = st[3]; + *(fb+1) = attr; fb += 2*VIDEO_COLS; + + *fb2 = st[4]; + *(fb2+1) = attr; fb2 += 2*VIDEO_COLS; + } + + // Draw title + if (title) + { + if (separate == 0) + { + fb = video_addr(x+1, y); + *fb = ti[3]; + fb += 2; + *fb = ' '; + fb += 2; + while (*title) + { + *fb = *title; + fb ++; + *fb = attr; + fb++; title++; + } + *fb = ' '; + fb += 2; + *fb = ti[4]; + } + else + { + fb = video_addr(x, y+2); + *fb = ti[0]; + fb += 2; + for (i=0; i<w-2; i++) + { + *fb = ti[1]; + *(fb+1) = attr; + fb += 2; + } + *fb = ti[2]; + *(fb+1) = attr; + fb = video_addr(x+1, y+1); + for (i=0; i<w-2; i++) + { + *fb = ' '; + *(fb+1) = attr; + fb += 2; + } + fb = video_addr(x+2, y+1); + + while (*title) + { + *fb = *title; + *(fb+1) = attr; + fb += 2; + title++; + } + } + } + +} + +void video_draw_text(int x, int y, int attr, char *text) +{ + unsigned char *fb = video_addr(x,y); + while (*text) + { + *fb++ = *text++; + *fb++ = attr; + } +} + +void video_save_rect(int x, int y, int w, int h, void *save_area, int clearchar, int clearattr) +{ + unsigned char *save = (unsigned char *)save_area; + unsigned char *fb = video_addr(x,y); + int i,j; + for (i=0; i<h; i++) + { + unsigned char *fbb = fb; + for (j=0; j<w; j++) + { + *save ++ = *fb; + if (clearchar > 0) *fb = clearchar; + fb ++; + *save ++ = *fb; + if (clearattr > 0) *fb = clearattr; + } + fb = fbb + 2*VIDEO_COLS; + } +} + +void video_restore_rect(int x, int y, int w, int h, void *save_area) +{ + unsigned char *save = (unsigned char *)save_area; + unsigned char *fb = video_addr(x,y); + int i,j; + for (i=0; i<h; i++) + { + unsigned char *fbb = fb; + for (j=0; j<w; j++) + { + *fb ++ = *save ++; + *fb ++ = *save ++; + } + fb = fbb + 2*VIDEO_COLS; + } + +} + +int video_rows(void) +{ + return VIDEO_ROWS; +} + +int video_cols(void) +{ + return VIDEO_COLS; +} + +void video_size(int cols, int rows) +{ + video_numrows = rows; + video_numcols = cols; +} + +void video_clear(void) +{ + unsigned short *fbb = (unsigned short *)0xFD0B8000; + int i,j; + unsigned short val = 0x2000 | current_attr; + + for (i=0; i<video_rows(); i++) + { + for (j=0; j<video_cols(); j++) + { + *fbb++ = val; + } + } + video_set_cursor(0,0); + cursor_row = 0; + cursor_col = 0; +} + +#ifdef EASTEREGG +int video_easteregg_active = 0; + +void video_easteregg(void) +{ + video_easteregg_active = 1; +} +#endif + +extern bd_t *bd_global; +extern block_dev_desc_t * ide_get_dev(int dev); +extern char version_string[]; + +void video_banner(void) +{ + block_dev_desc_t *ide; + int i; + char *s; + int maxdev; + + + if (video_inited == 0) return; +#ifdef EASTEREGG + if (video_easteregg_active) + { + prompt_string=""; + video_clear(); + printf("\n"); + printf(" **** COMMODORE 64 BASIC X2 ****\n\n"); + printf(" 64K RAM SYSTEM 38911 BASIC BYTES FREE\n\n"); + printf("READY\n"); + } + else + { +#endif + s = getenv("ide_maxbus"); + if (s) + maxdev = atoi(s) * 2; + else + maxdev = 4; + + s = getenv("stdout"); + if (s && strcmp(s, "serial") == 0) + return; + + video_clear(); + printf("%s\n\nCPU: ", version_string); + checkcpu(); + printf("DRAM: %ld MB\n", bd_global->bi_memsize/(1024*1024)); + printf("FSB: %ld MHz\n", bd_global->bi_busfreq/1000000); + + printf("\n---- Disk summary ----\n"); + for (i = 0; i < maxdev; i++) + { + ide = ide_get_dev(i); + printf("Device %d: ", i); + dev_print(ide); + } + +/* + video_draw_box(SINGLE_BOX, 0x0F, "Test 1", 0, 0,18, 72, 4); + video_draw_box(DOUBLE_BOX, 0x0F, "Test 2", 1, 4,10, 50, 6); + video_draw_box(DOUBLE_BOX, 0x0F, "Test 3", 0, 40, 3, 20, 5); + + video_draw_text(1, 4, 0x2F, "Highlighted options"); + video_draw_text(1, 5, 0x0F, "Non-selected option"); + video_draw_text(1, 6, 0x07, "disabled option"); +*/ +#ifdef EASTEREGG + } +#endif +} |