summaryrefslogtreecommitdiff
path: root/board/amcc/canyonlands
diff options
context:
space:
mode:
Diffstat (limited to 'board/amcc/canyonlands')
-rw-r--r--board/amcc/canyonlands/bootstrap.c2
-rw-r--r--board/amcc/canyonlands/canyonlands.c48
-rw-r--r--board/amcc/canyonlands/config.mk2
-rw-r--r--board/amcc/canyonlands/init.S40
4 files changed, 46 insertions, 46 deletions
diff --git a/board/amcc/canyonlands/bootstrap.c b/board/amcc/canyonlands/bootstrap.c
index 1d125b6e6ea..6b74743550b 100644
--- a/board/amcc/canyonlands/bootstrap.c
+++ b/board/amcc/canyonlands/bootstrap.c
@@ -168,7 +168,7 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
if (i2c_write(I2C_EEPROM_ADDR, 0, 1, buf, 16) != 0)
printf("Error writing to EEPROM at address 0x%x\n", I2C_EEPROM_ADDR);
- udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
+ udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
printf("Done\n");
printf("Please power-cycle the board for the changes to take effect\n");
diff --git a/board/amcc/canyonlands/canyonlands.c b/board/amcc/canyonlands/canyonlands.c
index 47667eeec39..e9186f868d5 100644
--- a/board/amcc/canyonlands/canyonlands.c
+++ b/board/amcc/canyonlands/canyonlands.c
@@ -29,11 +29,11 @@
#include <asm/4xx_pcie.h>
#include <asm/gpio.h>
-extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
DECLARE_GLOBAL_DATA_PTR;
-#define CFG_BCSR3_PCIE 0x10
+#define CONFIG_SYS_BCSR3_PCIE 0x10
#define BOARD_CANYONLANDS_PCIE 1
#define BOARD_CANYONLANDS_SATA 2
@@ -86,7 +86,7 @@ int board_early_init_f(void)
SDR0_CUST0_NDFC_BW_8_BIT |
SDR0_CUST0_NDFC_ARE_MASK |
SDR0_CUST0_NDFC_BAC_ENCODE(3) |
- (0x80000000 >> (28 + CFG_NAND_CS));
+ (0x80000000 >> (28 + CONFIG_SYS_NAND_CS));
mtsdr(SDR0_CUST0, sdr0_cust0);
/*
@@ -99,13 +99,13 @@ int board_early_init_f(void)
mtsdr(SDR0_PCI0, 0xe0000000);
/* Enable ethernet and take out of reset */
- out_8((void *)CFG_BCSR_BASE + 6, 0);
+ out_8((void *)CONFIG_SYS_BCSR_BASE + 6, 0);
/* Remove NOR-FLASH, NAND-FLASH & EEPROM hardware write protection */
- out_8((void *)CFG_BCSR_BASE + 5, 0);
+ out_8((void *)CONFIG_SYS_BCSR_BASE + 5, 0);
/* Enable USB host & USB-OTG */
- out_8((void *)CFG_BCSR_BASE + 7, 0);
+ out_8((void *)CONFIG_SYS_BCSR_BASE + 7, 0);
mtsdr(SDR0_SRST1, 0); /* Pull AHB out of reset default=1 */
@@ -158,7 +158,7 @@ int checkboard(void)
gd->board_type = BOARD_GLACIER;
} else {
printf("Board: Canyonlands - AMCC PPC460EX Evaluation Board");
- if (in_8((void *)(CFG_BCSR_BASE + 3)) & CFG_BCSR3_PCIE)
+ if (in_8((void *)(CONFIG_SYS_BCSR_BASE + 3)) & CONFIG_SYS_BCSR3_PCIE)
gd->board_type = BOARD_CANYONLANDS_PCIE;
else
gd->board_type = BOARD_CANYONLANDS_SATA;
@@ -175,7 +175,7 @@ int checkboard(void)
break;
}
- printf(", Rev. %X", in_8((void *)(CFG_BCSR_BASE + 0)));
+ printf(", Rev. %X", in_8((void *)(CONFIG_SYS_BCSR_BASE + 0)));
if (s != NULL) {
puts(", serial# ");
@@ -208,7 +208,7 @@ u32 ddr_clktr(u32 default_val) {
*/
phys_size_t initdram(int board_type)
{
- return CFG_MBYTES_SDRAM << 20;
+ return CONFIG_SYS_MBYTES_SDRAM << 20;
}
#endif
@@ -219,7 +219,7 @@ phys_size_t initdram(int board_type)
* inbound map (PIM). But the bootstrap config choices are limited and
* may not be sufficient for a given board.
*/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
void pci_target_init(struct pci_controller * hose )
{
/*
@@ -234,7 +234,7 @@ void pci_target_init(struct pci_controller * hose )
* Map all of SDRAM to PCI address 0x0000_0000. Note that the 440
* strapping options to not support sizes such as 128/256 MB.
*/
- out_le32((void *)PCIX0_PIM0LAL, CFG_SDRAM_BASE);
+ out_le32((void *)PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE);
out_le32((void *)PCIX0_PIM0LAH, 0);
out_le32((void *)PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1);
out_le32((void *)PCIX0_BAR0, 0);
@@ -242,12 +242,12 @@ void pci_target_init(struct pci_controller * hose )
/*
* Program the board's subsystem id/vendor id
*/
- out_le16((void *)PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID);
- out_le16((void *)PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID);
+ out_le16((void *)PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID);
+ out_le16((void *)PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
out_le16((void *)PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY);
}
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
#if defined(CONFIG_PCI)
/*
@@ -314,9 +314,9 @@ void pcie_setup_hoses(int busno)
/* setup mem resource */
pci_set_region(hose->regions + 0,
- CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
- CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
- CFG_PCIE_MEMSIZE,
+ CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
+ CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
+ CONFIG_SYS_PCIE_MEMSIZE,
PCI_REGION_MEM);
hose->region_count = 1;
pci_register_hose(hose);
@@ -362,16 +362,16 @@ int board_early_init_r (void)
/* Remap the NOR FLASH to 0xcc00.0000 ... 0xcfff.ffff */
#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
- mtebc(pb3cr, CFG_FLASH_BASE_PHYS_L | 0xda000);
+ mtebc(pb3cr, CONFIG_SYS_FLASH_BASE_PHYS_L | 0xda000);
#else
- mtebc(pb0cr, CFG_FLASH_BASE_PHYS_L | 0xda000);
+ mtebc(pb0cr, CONFIG_SYS_FLASH_BASE_PHYS_L | 0xda000);
#endif
/* Remove TLB entry of boot EBC mapping */
- remove_tlb(CFG_BOOT_BASE_ADDR, 16 << 20);
+ remove_tlb(CONFIG_SYS_BOOT_BASE_ADDR, 16 << 20);
/* Add TLB entry for 0xfc00.0000 -> 0x4.cc00.0000 */
- program_tlb(CFG_FLASH_BASE_PHYS, CFG_FLASH_BASE, CFG_FLASH_SIZE,
+ program_tlb(CONFIG_SYS_FLASH_BASE_PHYS, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_SIZE,
TLB_WORD2_I_ENABLE);
/*
@@ -427,9 +427,9 @@ int misc_init_r(void)
* Disable square wave output: Batterie will be drained
* quickly, when this output is not disabled
*/
- val = i2c_reg_read(CFG_I2C_RTC_ADDR, 0xa);
+ val = i2c_reg_read(CONFIG_SYS_I2C_RTC_ADDR, 0xa);
val &= ~0x40;
- i2c_reg_write(CFG_I2C_RTC_ADDR, 0xa, val);
+ i2c_reg_write(CONFIG_SYS_I2C_RTC_ADDR, 0xa, val);
return 0;
}
@@ -445,7 +445,7 @@ void ft_board_setup(void *blob, bd_t *bd)
/* Fixup NOR mapping */
val[0] = 0; /* chip select number */
val[1] = 0; /* always 0 */
- val[2] = CFG_FLASH_BASE_PHYS_L; /* we fixed up this address */
+ val[2] = CONFIG_SYS_FLASH_BASE_PHYS_L; /* we fixed up this address */
val[3] = gd->bd->bi_flashsize;
rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
val, sizeof(val), 1);
diff --git a/board/amcc/canyonlands/config.mk b/board/amcc/canyonlands/config.mk
index 2330cae925b..551a8175563 100644
--- a/board/amcc/canyonlands/config.mk
+++ b/board/amcc/canyonlands/config.mk
@@ -37,5 +37,5 @@ PLATFORM_CPPFLAGS += -DDEBUG
endif
ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
endif
diff --git a/board/amcc/canyonlands/init.S b/board/amcc/canyonlands/init.S
index 258fb5de8ff..179dd324add 100644
--- a/board/amcc/canyonlands/init.S
+++ b/board/amcc/canyonlands/init.S
@@ -47,10 +47,10 @@ tlbtab:
* enable SA_I
*/
#ifndef CONFIG_NAND_SPL
- tlbentry(CFG_BOOT_BASE_ADDR, SZ_16M, CFG_BOOT_BASE_ADDR, 4, AC_R|AC_W|AC_X|SA_G) /* TLB 0 */
+ tlbentry(CONFIG_SYS_BOOT_BASE_ADDR, SZ_16M, CONFIG_SYS_BOOT_BASE_ADDR, 4, AC_R|AC_W|AC_X|SA_G) /* TLB 0 */
#else
- tlbentry(CFG_NAND_BOOT_SPL_SRC, SZ_4K, CFG_NAND_BOOT_SPL_SRC, 4, AC_R|AC_W|AC_X|SA_G)
- tlbentry(CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_NAND_BOOT_SPL_SRC, SZ_4K, CONFIG_SYS_NAND_BOOT_SPL_SRC, 4, AC_R|AC_W|AC_X|SA_G)
+ tlbentry(CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
tlbentry(256 << 20, SZ_256M, 256 << 20, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
#endif
@@ -60,37 +60,37 @@ tlbtab:
* routine.
*/
-#ifdef CFG_INIT_RAM_DCACHE
+#ifdef CONFIG_SYS_INIT_RAM_DCACHE
/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
- tlbentry(CFG_INIT_RAM_ADDR, SZ_4K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G)
+ tlbentry(CONFIG_SYS_INIT_RAM_ADDR, SZ_4K, CONFIG_SYS_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G)
#endif
- tlbentry(CFG_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x20000000, 0xC, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x20000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCIE0_CFGBASE, SZ_16M, 0x00000000, 0xD, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCIE1_CFGBASE, SZ_16M, 0x20000000, 0xD, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCIE0_XCFGBASE, SZ_1K, 0x10000000, 0xD, AC_R|AC_W|SA_G|SA_I)
- tlbentry(CFG_PCIE1_XCFGBASE, SZ_1K, 0x30000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE0_CFGBASE, SZ_16M, 0x00000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE1_CFGBASE, SZ_16M, 0x20000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE0_XCFGBASE, SZ_1K, 0x10000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE1_XCFGBASE, SZ_1K, 0x30000000, 0xD, AC_R|AC_W|SA_G|SA_I)
/* PCIe UTL register */
- tlbentry(CFG_PCIE_BASE, SZ_16K, 0x08010000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_PCIE_BASE, SZ_16K, 0x08010000, 0xC, AC_R|AC_W|SA_G|SA_I)
/* TLB-entry for NAND */
- tlbentry(CFG_NAND_ADDR, SZ_16M, CFG_NAND_ADDR, 4, AC_R|AC_W|AC_X|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_NAND_ADDR, SZ_16M, CONFIG_SYS_NAND_ADDR, 4, AC_R|AC_W|AC_X|SA_G|SA_I)
/* TLB-entry for CPLD */
- tlbentry(CFG_BCSR_BASE, SZ_1K, CFG_BCSR_BASE, 4, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_BCSR_BASE, SZ_1K, CONFIG_SYS_BCSR_BASE, 4, AC_R|AC_W|SA_G|SA_I)
/* TLB-entry for OCM */
- tlbentry(CFG_OCM_BASE, SZ_16K, 0x00040000, 4, AC_R|AC_W|AC_X|SA_I)
+ tlbentry(CONFIG_SYS_OCM_BASE, SZ_16K, 0x00040000, 4, AC_R|AC_W|AC_X|SA_I)
/* TLB-entry for Local Configuration registers => peripherals */
- tlbentry(CFG_LOCAL_CONF_REGS, SZ_16M, CFG_LOCAL_CONF_REGS, 4, AC_R|AC_W|AC_X|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_LOCAL_CONF_REGS, SZ_16M, CONFIG_SYS_LOCAL_CONF_REGS, 4, AC_R|AC_W|AC_X|SA_G|SA_I)
/* AHB: Internal USB Peripherals (USB, SATA) */
- tlbentry(CFG_AHB_BASE, SZ_1M, 0xbff00000, 4, AC_R|AC_W|AC_X|SA_G|SA_I)
+ tlbentry(CONFIG_SYS_AHB_BASE, SZ_1M, 0xbff00000, 4, AC_R|AC_W|AC_X|SA_G|SA_I)
tlbtab_end
@@ -99,8 +99,8 @@ tlbtab:
* For NAND booting the first TLB has to be reconfigured to full size
* and with caching disabled after running from RAM!
*/
-#define TLB00 TLB0(CFG_BOOT_BASE_ADDR, SZ_256M)
-#define TLB01 TLB1(CFG_BOOT_BASE_ADDR, 1)
+#define TLB00 TLB0(CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M)
+#define TLB01 TLB1(CONFIG_SYS_BOOT_BASE_ADDR, 1)
#define TLB02 TLB2(AC_R|AC_W|AC_X|SA_G|SA_I)
.globl reconfig_tlb0
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-09 09:21:41 +0000