summaryrefslogtreecommitdiff
path: root/board/amcc/katmai/katmai.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/amcc/katmai/katmai.c')
-rw-r--r--board/amcc/katmai/katmai.c30
1 files changed, 15 insertions, 15 deletions
diff --git a/board/amcc/katmai/katmai.c b/board/amcc/katmai/katmai.c
index 172b5811e3..b6c0c11ef2 100644
--- a/board/amcc/katmai/katmai.c
+++ b/board/amcc/katmai/katmai.c
@@ -224,11 +224,11 @@ int board_early_init_f (void)
mfr |= SDR0_MFR_FIXD; /* Workaround for PCI/DMA */
mtsdr(sdr_mfr, mfr);
- mtsdr(SDR0_PFC0, CFG_PFC0);
+ mtsdr(SDR0_PFC0, CONFIG_SYS_PFC0);
- out32(GPIO0_OR, CFG_GPIO_OR);
- out32(GPIO0_ODR, CFG_GPIO_ODR);
- out32(GPIO0_TCR, CFG_GPIO_TCR);
+ out32(GPIO0_OR, CONFIG_SYS_GPIO_OR);
+ out32(GPIO0_ODR, CONFIG_SYS_GPIO_ODR);
+ out32(GPIO0_TCR, CONFIG_SYS_GPIO_TCR);
return 0;
}
@@ -298,7 +298,7 @@ int pci_pre_init(struct pci_controller * hose )
* may not be sufficient for a given board.
*
************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
void pci_target_init(struct pci_controller * hose )
{
/*-------------------------------------------------------------------+
@@ -313,7 +313,7 @@ void pci_target_init(struct pci_controller * hose )
* Map all of SDRAM to PCI address 0x0000_0000. Note that the 440
* strapping options to not support sizes such as 128/256 MB.
*-------------------------------------------------------------------*/
- out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE );
+ out32r( PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE );
out32r( PCIX0_PIM0LAH, 0 );
out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
out32r( PCIX0_BAR0, 0 );
@@ -321,12 +321,12 @@ void pci_target_init(struct pci_controller * hose )
/*-------------------------------------------------------------------+
* Program the board's subsystem id/vendor id
*-------------------------------------------------------------------*/
- out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID );
- out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID );
+ out16r( PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
+ out16r( PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID );
out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY );
}
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
#if defined(CONFIG_PCI)
/*************************************************************************
@@ -357,11 +357,11 @@ static int katmai_pcie_card_present(int port)
val = in32(GPIO0_IR);
switch (port) {
case 0:
- return !(val & GPIO_VAL(CFG_GPIO_PCIE_PRESENT0));
+ return !(val & GPIO_VAL(CONFIG_SYS_GPIO_PCIE_PRESENT0));
case 1:
- return !(val & GPIO_VAL(CFG_GPIO_PCIE_PRESENT1));
+ return !(val & GPIO_VAL(CONFIG_SYS_GPIO_PCIE_PRESENT1));
case 2:
- return !(val & GPIO_VAL(CFG_GPIO_PCIE_PRESENT2));
+ return !(val & GPIO_VAL(CONFIG_SYS_GPIO_PCIE_PRESENT2));
default:
return 0;
}
@@ -404,9 +404,9 @@ void pcie_setup_hoses(int busno)
/* setup mem resource */
pci_set_region(hose->regions + 0,
- CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
- CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
- CFG_PCIE_MEMSIZE,
+ CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
+ CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
+ CONFIG_SYS_PCIE_MEMSIZE,
PCI_REGION_MEM);
hose->region_count = 1;
pci_register_hose(hose);