1 files changed, 0 insertions, 180 deletions

diff --git a/board/amcc/taihu/taihu.c b/board/amcc/taihu/taihu.c
deleted file mode 100644
index fcb893633a0..00000000000
--- a/board/amcc/taihu/taihu.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * (C) Copyright 2000-2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2005-2007
- * Beijing UD Technology Co., Ltd., taihusupport@amcc.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#include <common.h>
-#include <command.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <spi.h>
-#include <netdev.h>
-#include <asm/ppc4xx-gpio.h>
-
-extern int lcd_init(void);
-
-/*
- * board_early_init_f
- */
-int board_early_init_f(void)
-{
-	lcd_init();
-
-	mtdcr(UIC0SR, 0xFFFFFFFF);	/* clear all ints */
-	mtdcr(UIC0ER, 0x00000000);	/* disable all ints */
-	mtdcr(UIC0CR, 0x00000000);
-	mtdcr(UIC0PR, 0xFFFF7F00);	/* set int polarities */
-	mtdcr(UIC0TR, 0x00000000);	/* set int trigger levels */
-	mtdcr(UIC0SR, 0xFFFFFFFF);	/* clear all ints */
-	mtdcr(UIC0VCR, 0x00000001);	/* set vect base=0,INT0 highest priority */
-
-	mtebc(PB3AP, CONFIG_SYS_EBC_PB3AP);	/* memory bank 3 (CPLD_LCM) initialization */
-	mtebc(PB3CR, CONFIG_SYS_EBC_PB3CR);
-
-	/*
-	 * Configure CPC0_PCI to enable PerWE as output
-	 * and enable the internal PCI arbiter
-	 */
-	mtdcr(CPC0_PCI, CPC0_PCI_SPE | CPC0_PCI_HOST_CFG_EN | CPC0_PCI_ARBIT_EN);
-
-	return 0;
-}
-
-/*
- * Check Board Identity:
- */
-int checkboard(void)
-{
-	char buf[64];
-	int i = getenv_f("serial#", buf, sizeof(buf));
-
-	puts("Board: Taihu - AMCC PPC405EP Evaluation Board");
-
-	if (i > 0) {
-		puts(", serial# ");
-		puts(buf);
-	}
-	putc('\n');
-
-	return 0;
-}
-
-static int do_sw_stat(cmd_tbl_t* cmd_tp, int flags, int argc, char * const argv[])
-{
-	char stat;
-	int i;
-
-	stat = in_8((u8 *) CPLD_REG0_ADDR);
-	printf("SW2 status: ");
-	for (i=0; i<4; i++) /* 4-position */
-		printf("%d:%s ", i, stat & (0x08 >> i)?"on":"off");
-	printf("\n");
-	return 0;
-}
-
-U_BOOT_CMD (
-	sw2_stat, 1, 1, do_sw_stat,
-	"show status of switch 2",
-	""
-);
-
-static int do_led_ctl(cmd_tbl_t* cmd_tp, int flags, int argc, char * const argv[])
-{
-	int led_no;
-
-	if (argc != 3)
-		return cmd_usage(cmd_tp);
-
-	led_no = simple_strtoul(argv[1], NULL, 16);
-	if (led_no != 1 && led_no != 2)
-		return cmd_usage(cmd_tp);
-
-	if (strcmp(argv[2],"off") == 0x0) {
-		if (led_no == 1)
-			gpio_write_bit(30, 1);
-		else
-			gpio_write_bit(31, 1);
-	} else if (strcmp(argv[2],"on") == 0x0) {
-		if (led_no == 1)
-			gpio_write_bit(30, 0);
-		else
-			gpio_write_bit(31, 0);
-	} else {
-		return cmd_usage(cmd_tp);
-	}
-
-	return 0;
-}
-
-U_BOOT_CMD (
-	led_ctl, 3, 1, do_led_ctl,
-	"make led 1 or 2  on or off",
-	"<led_no> <on/off>	-  make led <led_no> on/off,\n"
-	"\tled_no is 1 or 2"
-);
-
-#define SPI_CS_GPIO0	0
-#define SPI_SCLK_GPIO14	14
-#define SPI_DIN_GPIO15	15
-#define SPI_DOUT_GPIO16	16
-
-void spi_scl(int bit)
-{
-	gpio_write_bit(SPI_SCLK_GPIO14, bit);
-}
-
-void spi_sda(int bit)
-{
-	gpio_write_bit(SPI_DOUT_GPIO16, bit);
-}
-
-unsigned char spi_read(void)
-{
-	return (unsigned char)gpio_read_in_bit(SPI_DIN_GPIO15);
-}
-
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
-	return bus == 0 && cs == 0;
-}
-
-void spi_cs_activate(struct spi_slave *slave)
-{
-	gpio_write_bit(SPI_CS_GPIO0, 1);
-}
-
-void spi_cs_deactivate(struct spi_slave *slave)
-{
-	gpio_write_bit(SPI_CS_GPIO0, 0);
-}
-
-#ifdef CONFIG_PCI
-static unsigned char int_lines[32] = {
-	29, 30, 27, 28, 29, 30, 25, 27,
-	29, 30, 27, 28, 29, 30, 27, 28,
-	29, 30, 27, 28, 29, 30, 27, 28,
-	29, 30, 27, 28, 29, 30, 27, 28};
-
-static void taihu_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
-{
-	unsigned char int_line = int_lines[PCI_DEV(dev) & 31];
-
-	pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, int_line);
-}
-
-int pci_pre_init(struct pci_controller *hose)
-{
-	hose->fixup_irq = taihu_pci_fixup_irq;
-	return 1;
-}
-#endif /* CONFIG_PCI */
-
-int board_eth_init(bd_t *bis)
-{
-	cpu_eth_init(bis);
-	return pci_eth_init(bis);
-}