diff options
Diffstat (limited to 'board/amlogic/vim3/vim3.c')
| -rw-r--r-- | board/amlogic/vim3/vim3.c | 191 |
1 files changed, 191 insertions, 0 deletions
diff --git a/board/amlogic/vim3/vim3.c b/board/amlogic/vim3/vim3.c new file mode 100644 index 00000000000..43d7a8e84f6 --- /dev/null +++ b/board/amlogic/vim3/vim3.c @@ -0,0 +1,191 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2020 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ + +#include <common.h> +#include <dm.h> +#include <env_internal.h> +#include <init.h> +#include <net.h> +#include <asm/io.h> +#include <asm/arch/boot.h> +#include <asm/arch/eth.h> +#include <asm/arch/sm.h> +#include <asm/global_data.h> +#include <i2c.h> +#include "khadas-mcu.h" + +int mmc_get_env_dev(void) +{ + switch (meson_get_boot_device()) { + case BOOT_DEVICE_EMMC: + return 2; + case BOOT_DEVICE_SD: + return 1; + default: + /* boot device is not EMMC|SD */ + return -1; + } +} + +/* + * The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential + * lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between + * an USB3.0 Type A connector and a M.2 Key M slot. + * The PHY driving these differential lines is shared between + * the USB3.0 controller and the PCIe Controller, thus only + * a single controller can use it. + */ +int meson_ft_board_setup(void *blob, struct bd_info *bd) +{ + struct udevice *bus, *dev; + int node, i2c_node, ret; + unsigned int i2c_addr; + u32 *val; + + /* Find I2C device */ + node = fdt_node_offset_by_compatible(gd->fdt_blob, -1, "khadas,mcu"); + if (node < 0) { + printf("vim3: cannot find khadas,mcu node\n"); + return 0; + } + + /* Get addr */ + val = (u32 *)fdt_getprop(gd->fdt_blob, node, "reg", NULL); + if (!val) { + printf("vim3: cannot find khadas,mcu node i2c addr\n"); + return 0; + } + i2c_addr = fdt32_to_cpu(*val); + + /* Get i2c device */ + i2c_node = fdt_parent_offset(gd->fdt_blob, node); + if (node < 0) { + printf("vim3: cannot find khadas,mcu i2c node\n"); + return 0; + } + + ret = uclass_get_device_by_of_offset(UCLASS_I2C, i2c_node, &bus); + if (ret < 0) { + printf("vim3: cannot find i2c bus (%d)\n", ret); + return 0; + } + + ret = i2c_get_chip(bus, i2c_addr, 1, &dev); + if (ret < 0) { + printf("vim3: cannot find i2c chip (%d)\n", ret); + return 0; + } + + /* Read USB_PCIE_SWITCH_REG */ + ret = dm_i2c_reg_read(dev, KHADAS_MCU_USB_PCIE_SWITCH_REG); + if (ret < 0) { + printf("vim3: failed to read i2c reg (%d)\n", ret); + return 0; + } + debug("MCU_USB_PCIE_SWITCH_REG: %d\n", ret); + + /* + * If in PCIe mode, alter DT + * 0：Enable USB3.0，Disable PCIE, 1：Disable USB3.0, Enable PCIE + */ + if (ret > 0) { + static char data[32] __aligned(4); + const void *ptmp; + int len; + + /* Find USB node */ + node = fdt_node_offset_by_compatible(blob, -1, "amlogic,meson-g12a-usb-ctrl"); + if (node < 0) { + printf("vim3: cannot find amlogic,meson-g12a-usb-ctrl node\n"); + return 0; + } + + /* Update PHY names (mandatory to disable USB3.0) */ + len = strlcpy(data, "usb2-phy0", 32) + 1; + len += strlcpy(&data[len], "usb2-phy1", 32 - len) + 1; + ret = fdt_setprop(blob, node, "phy-names", data, len); + if (ret < 0) { + printf("vim3: failed to update usb phy names property (%d)\n", ret); + return 0; + } + + /* Update PHY list, by keeping the 2 first entries (optional) */ + ptmp = fdt_getprop(blob, node, "phys", &len); + if (ptmp) { + memcpy(data, ptmp, min_t(unsigned int, 2 * sizeof(u32), len)); + + ret = fdt_setprop(blob, node, "phys", data, + min_t(unsigned int, 2 * sizeof(u32), len)); + if (ret < 0) + printf("vim3: failed to update usb phys property (%d)\n", ret); + } else + printf("vim3: cannot find usb node phys property\n"); + + /* Find PCIe node */ + node = fdt_node_offset_by_compatible(blob, -1, "amlogic,g12a-pcie"); + if (node < 0) { + printf("vim3: cannot find amlogic,g12a-pcie node\n"); + return 0; + } + + /* Enable PCIe */ + len = strlcpy(data, "okay", 32) + 1; + ret = fdt_setprop(blob, node, "status", data, len); + if (ret < 0) { + printf("vim3: failed to enable pcie node (%d)\n", ret); + return 0; + } + + printf("vim3: successfully enabled PCIe\n"); + } + + return 0; +} + +#define EFUSE_MAC_OFFSET 0 +#define EFUSE_MAC_SIZE 12 +#define MAC_ADDR_LEN 6 + +int misc_init_r(void) +{ + u8 mac_addr[MAC_ADDR_LEN + 1]; + char efuse_mac_addr[EFUSE_MAC_SIZE], tmp[3]; + char serial_string[EFUSE_MAC_SIZE + 1]; + ssize_t len; + + if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { + len = meson_sm_read_efuse(EFUSE_MAC_OFFSET, + efuse_mac_addr, EFUSE_MAC_SIZE); + if (len != EFUSE_MAC_SIZE) + return 0; + + /* MAC is stored in ASCII format, 1bytes = 2characters */ + for (int i = 0; i < 6; i++) { + tmp[0] = efuse_mac_addr[i * 2]; + tmp[1] = efuse_mac_addr[i * 2 + 1]; + tmp[2] = '\0'; + mac_addr[i] = hextoul(tmp, NULL); + } + mac_addr[MAC_ADDR_LEN] = '\0'; + + if (is_valid_ethaddr(mac_addr)) + eth_env_set_enetaddr("ethaddr", mac_addr); + else + meson_generate_serial_ethaddr(); + + eth_env_get_enetaddr("ethaddr", mac_addr); + } + + if (!env_get("serial#")) { + eth_env_get_enetaddr("ethaddr", mac_addr); + sprintf(serial_string, "%02X%02X%02X%02X%02X%02X", + mac_addr[0], mac_addr[1], mac_addr[2], + mac_addr[3], mac_addr[4], mac_addr[5]); + env_set("serial#", serial_string); + } + + return 0; +} |