diff options
Diffstat (limited to 'board/bf527-ezkit')
| -rw-r--r-- | board/bf527-ezkit/video.c | 148 |
1 files changed, 134 insertions, 14 deletions
diff --git a/board/bf527-ezkit/video.c b/board/bf527-ezkit/video.c index 57652be293e..8f6ea2308f6 100644 --- a/board/bf527-ezkit/video.c +++ b/board/bf527-ezkit/video.c @@ -12,40 +12,111 @@ #include <malloc.h> #include <asm/blackfin.h> #include <asm/mach-common/bits/dma.h> -#include <i2c.h> +#include <spi.h> #include <linux/types.h> #include <stdio_dev.h> -#define DMA_SIZE16 2 - #include <asm/mach-common/bits/ppi.h> #include <asm/mach-common/bits/timer.h> -#include <asm/bfin_logo_230x230.h> - #define LCD_X_RES 320 /* Horizontal Resolution */ #define LCD_Y_RES 240 /* Vertical Resolution */ -#define LCD_BPP 24 /* Bit Per Pixel */ -#define LCD_PIXEL_SIZE (LCD_BPP / 8) +#define DMA_BUS_SIZE 16 + +#ifdef CONFIG_MK_BF527_EZKIT_REV_2_1 /* lq035q1 */ + +#if !defined(CONFIG_LQ035Q1_USE_RGB888_8_BIT_PPI) && \ + !defined(CONFIG_LQ035Q1_USE_RGB565_8_BIT_PPI) +# define CONFIG_LQ035Q1_USE_RGB565_8_BIT_PPI +#endif + +/* Interface 16/18-bit TFT over an 8-bit wide PPI using a + * small Programmable Logic Device (CPLD) + * http://blackfin.uclinux.org/gf/project/stamp/frs/?action=FrsReleaseBrowse&frs_package_id=165 + */ + +#ifdef CONFIG_LQ035Q1_USE_RGB565_8_BIT_PPI +#include <asm/bfin_logo_rgb565_230x230.h> +#define LCD_BPP 16 /* Bit Per Pixel */ +#define CLOCKS_PPIX 2 /* Clocks per pixel */ +#define CPLD_DELAY 3 /* RGB565 pipeline delay */ +#endif + +#ifdef CONFIG_LQ035Q1_USE_RGB888_8_BIT_PPI +#include <asm/bfin_logo_230x230.h> +#define LCD_BPP 24 /* Bit Per Pixel */ +#define CLOCKS_PPIX 3 /* Clocks per pixel */ +#define CPLD_DELAY 5 /* RGB888 pipeline delay */ +#endif + +/* + * HS and VS timing parameters (all in number of PPI clk ticks) + */ + +#define H_ACTPIX (LCD_X_RES * CLOCKS_PPIX) /* active horizontal pixel */ +#define H_PERIOD (336 * CLOCKS_PPIX) /* HS period */ +#define H_PULSE (2 * CLOCKS_PPIX) /* HS pulse width */ +#define H_START (7 * CLOCKS_PPIX + CPLD_DELAY) /* first valid pixel */ + +#define U_LINE 4 /* Blanking Lines */ + +#define V_LINES (LCD_Y_RES + U_LINE) /* total vertical lines */ +#define V_PULSE (2 * CLOCKS_PPIX) /* VS pulse width (1-5 H_PERIODs) */ +#define V_PERIOD (H_PERIOD * V_LINES) /* VS period */ + +#define ACTIVE_VIDEO_MEM_OFFSET ((U_LINE / 2) * LCD_X_RES * (LCD_BPP / 8)) + +/* + * LCD Modes + */ +#define LQ035_RL (0 << 8) /* Right -> Left Scan */ +#define LQ035_LR (1 << 8) /* Left -> Right Scan */ +#define LQ035_TB (1 << 9) /* Top -> Botton Scan */ +#define LQ035_BT (0 << 9) /* Botton -> Top Scan */ +#define LQ035_BGR (1 << 11) /* Use BGR format */ +#define LQ035_RGB (0 << 11) /* Use RGB format */ +#define LQ035_NORM (1 << 13) /* Reversal */ +#define LQ035_REV (0 << 13) /* Reversal */ + +#define LQ035_INDEX 0x74 +#define LQ035_DATA 0x76 -#define DMA_BUS_SIZE 16 -#define LCD_CLK (12*1000*1000) /* 12MHz */ +#define LQ035_DRIVER_OUTPUT_CTL 0x1 +#define LQ035_SHUT_CTL 0x11 -#define CLOCKS_PER_PIX 3 +#define LQ035_DRIVER_OUTPUT_MASK (LQ035_LR | LQ035_TB | LQ035_BGR | LQ035_REV) +#define LQ035_DRIVER_OUTPUT_DEFAULT (0x2AEF & ~LQ035_DRIVER_OUTPUT_MASK) + +#define LQ035_SHUT (1 << 0) /* Shutdown */ +#define LQ035_ON (0 << 0) /* Shutdown */ + +#ifndef CONFIG_LQ035Q1_LCD_MODE +#define CONFIG_LQ035Q1_LCD_MODE (LQ035_NORM | LQ035_RL | LQ035_TB | LQ035_BGR) +#endif + +#else /* t350mcqb */ +#include <asm/bfin_logo_230x230.h> + +#define LCD_BPP 24 /* Bit Per Pixel */ +#define CLOCKS_PPIX 3 /* Clocks per pixel */ /* HS and VS timing parameters (all in number of PPI clk ticks) */ -#define H_ACTPIX (LCD_X_RES * CLOCKS_PER_PIX) /* active horizontal pixel */ -#define H_PERIOD (408 * CLOCKS_PER_PIX) /* HS period */ +#define H_ACTPIX (LCD_X_RES * CLOCKS_PPIX) /* active horizontal pixel */ +#define H_PERIOD (408 * CLOCKS_PPIX) /* HS period */ #define H_PULSE 90 /* HS pulse width */ #define H_START 204 /* first valid pixel */ #define U_LINE 1 /* Blanking Lines */ -#define V_LINES (LCD_Y_RES + U_LINE) /* total vertical lines */ +#define V_LINES (LCD_Y_RES + U_LINE) /* total vertical lines */ #define V_PULSE (3 * H_PERIOD) /* VS pulse width (1-5 H_PERIODs) */ #define V_PERIOD (H_PERIOD * V_LINES) /* VS period */ #define ACTIVE_VIDEO_MEM_OFFSET (U_LINE * H_ACTPIX) +#endif + +#define LCD_PIXEL_SIZE (LCD_BPP / 8) +#define DMA_SIZE16 2 #define PPI_TX_MODE 0x2 #define PPI_XFER_TYPE_11 0xC @@ -53,6 +124,40 @@ #define PPI_PACK_EN 0x80 #define PPI_POLS_1 0x8000 +#ifdef CONFIG_MK_BF527_EZKIT_REV_2_1 +static struct spi_slave *slave; +static int lq035q1_control(unsigned char reg, unsigned short value) +{ + int ret; + u8 regs[3] = {LQ035_INDEX, 0, 0}; + u8 data[3] = {LQ035_DATA, 0, 0}; + u8 dummy[3]; + + regs[2] = reg; + data[1] = value >> 8; + data[2] = value & 0xFF; + + if (!slave) { + /* FIXME: Verify the max SCK rate */ + slave = spi_setup_slave(CONFIG_LQ035Q1_SPI_BUS, + CONFIG_LQ035Q1_SPI_CS, 20000000, + SPI_MODE_3); + if (!slave) + return -1; + } + + if (spi_claim_bus(slave)) + return -1; + + ret = spi_xfer(slave, 24, regs, dummy, SPI_XFER_BEGIN | SPI_XFER_END); + ret |= spi_xfer(slave, 24, data, dummy, SPI_XFER_BEGIN | SPI_XFER_END); + + spi_release_bus(slave); + + return ret; +} +#endif + /* enable and disable PPI functions */ void EnablePPI(void) { @@ -80,7 +185,7 @@ void Init_PPI(void) *pPPI_DELAY = H_START; *pPPI_COUNT = (H_ACTPIX-1); - *pPPI_FRAME = 0; + *pPPI_FRAME = V_LINES; /* PPI control, to be replaced with definitions */ *pPPI_CONTROL = PPI_TX_MODE | /* output mode , PORT_DIR */ @@ -188,9 +293,20 @@ void DisableTIMER1(void) SSYNC(); } +void EnableTIMER12(void) +{ + *pTIMER_ENABLE |= TIMEN1 | TIMEN0; + SSYNC(); +} + int video_init(void *dst) { +#ifdef CONFIG_MK_BF527_EZKIT_REV_2_1 + lq035q1_control(LQ035_SHUT_CTL, LQ035_ON); + lq035q1_control(LQ035_DRIVER_OUTPUT_CTL, (CONFIG_LQ035Q1_LCD_MODE & + LQ035_DRIVER_OUTPUT_MASK) | LQ035_DRIVER_OUTPUT_DEFAULT); +#endif Init_Ports(); Init_DMA(dst); EnableDMA(); @@ -199,6 +315,9 @@ int video_init(void *dst) Init_PPI(); EnablePPI(); +#ifdef CONFIG_MK_BF527_EZKIT_REV_2_1 + EnableTIMER12(); +#else /* Frame sync 2 (VS) needs to start at least one PPI clk earlier */ EnableTIMER1(); /* Add Some Delay ... */ @@ -209,6 +328,7 @@ int video_init(void *dst) /* now start frame sync 1 */ EnableTIMER0(); +#endif return 0; } |