diff options
Diffstat (limited to 'board/dbau1x00')
| -rw-r--r-- | board/dbau1x00/dbau1x00.c | 29 |
1 files changed, 23 insertions, 6 deletions
diff --git a/board/dbau1x00/dbau1x00.c b/board/dbau1x00/dbau1x00.c index 3b6fcec1c8a..8fcbd812a5c 100644 --- a/board/dbau1x00/dbau1x00.c +++ b/board/dbau1x00/dbau1x00.c @@ -39,6 +39,13 @@ long int initdram(int board_type) /* In cpu/mips/cpu.c */ void write_one_tlb( int index, u32 pagemask, u32 hi, u32 low0, u32 low1 ); +#ifdef CONFIG_DBAU1100 +#warning "FIXME Check that bcsr is the same as dbau1000 board!" +#endif +#ifdef CONFIG_DBAU1500 +#warning "FIXME Check that bcsr is the same as dbau1000 board!" +#endif + int checkboard (void) { u16 status; @@ -51,14 +58,24 @@ int checkboard (void) proc_id = read_32bit_cp0_register(CP0_PRID); - switch(proc_id>>24){ + switch (proc_id >> 24) { case 0: - puts("Board: Merlot (DbAu1000)\n"); - printf("CPU: Au1000 396 MHz, id: 0x%02x, rev: 0x%02x\n", - (proc_id>>8)&0xFF,proc_id&0xFF); - break; + puts ("Board: Merlot (DbAu1000)\n"); + printf ("CPU: Au1000 396 MHz, id: 0x%02x, rev: 0x%02x\n", + (proc_id >> 8) & 0xFF, proc_id & 0xFF); + break; + case 1: + puts ("Board: DbAu1500\n"); + printf ("CPU: Au1500, id: 0x%02x, rev: 0x%02x\n", + (proc_id >> 8) & 0xFF, proc_id & 0xFF); + break; + case 2: + puts ("Board: DbAu1100\n"); + printf ("CPU: Au1100, id: 0x%02x, rev: 0x%02x\n", + (proc_id >> 8) & 0xFF, proc_id & 0xFF); + break; default: - printf("Unsupported cpu %d, proc_id=0x%x\n",proc_id>>24,proc_id); + printf ("Unsupported cpu %d, proc_id=0x%x\n", proc_id >> 24, proc_id); } #ifdef CONFIG_IDE_PCMCIA /* Enable 3.3 V on slot 0 ( VCC ) |