diff options
Diffstat (limited to 'board/freescale/mpc8568mds/mpc8568mds.c')
-rw-r--r-- | board/freescale/mpc8568mds/mpc8568mds.c | 555 |
1 files changed, 555 insertions, 0 deletions
diff --git a/board/freescale/mpc8568mds/mpc8568mds.c b/board/freescale/mpc8568mds/mpc8568mds.c new file mode 100644 index 00000000000..460cb1b2753 --- /dev/null +++ b/board/freescale/mpc8568mds/mpc8568mds.c @@ -0,0 +1,555 @@ +/* + * Copyright 2007 Freescale Semiconductor. + * + * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <pci.h> +#include <asm/processor.h> +#include <asm/immap_85xx.h> +#include <asm/immap_fsl_pci.h> +#include <spd.h> +#include <i2c.h> +#include <ioports.h> +#include <libfdt.h> +#include <fdt_support.h> + +#include "bcsr.h" + +const qe_iop_conf_t qe_iop_conf_tab[] = { + /* GETH1 */ + {4, 10, 1, 0, 2}, /* TxD0 */ + {4, 9, 1, 0, 2}, /* TxD1 */ + {4, 8, 1, 0, 2}, /* TxD2 */ + {4, 7, 1, 0, 2}, /* TxD3 */ + {4, 23, 1, 0, 2}, /* TxD4 */ + {4, 22, 1, 0, 2}, /* TxD5 */ + {4, 21, 1, 0, 2}, /* TxD6 */ + {4, 20, 1, 0, 2}, /* TxD7 */ + {4, 15, 2, 0, 2}, /* RxD0 */ + {4, 14, 2, 0, 2}, /* RxD1 */ + {4, 13, 2, 0, 2}, /* RxD2 */ + {4, 12, 2, 0, 2}, /* RxD3 */ + {4, 29, 2, 0, 2}, /* RxD4 */ + {4, 28, 2, 0, 2}, /* RxD5 */ + {4, 27, 2, 0, 2}, /* RxD6 */ + {4, 26, 2, 0, 2}, /* RxD7 */ + {4, 11, 1, 0, 2}, /* TX_EN */ + {4, 24, 1, 0, 2}, /* TX_ER */ + {4, 16, 2, 0, 2}, /* RX_DV */ + {4, 30, 2, 0, 2}, /* RX_ER */ + {4, 17, 2, 0, 2}, /* RX_CLK */ + {4, 19, 1, 0, 2}, /* GTX_CLK */ + {1, 31, 2, 0, 3}, /* GTX125 */ + + /* GETH2 */ + {5, 10, 1, 0, 2}, /* TxD0 */ + {5, 9, 1, 0, 2}, /* TxD1 */ + {5, 8, 1, 0, 2}, /* TxD2 */ + {5, 7, 1, 0, 2}, /* TxD3 */ + {5, 23, 1, 0, 2}, /* TxD4 */ + {5, 22, 1, 0, 2}, /* TxD5 */ + {5, 21, 1, 0, 2}, /* TxD6 */ + {5, 20, 1, 0, 2}, /* TxD7 */ + {5, 15, 2, 0, 2}, /* RxD0 */ + {5, 14, 2, 0, 2}, /* RxD1 */ + {5, 13, 2, 0, 2}, /* RxD2 */ + {5, 12, 2, 0, 2}, /* RxD3 */ + {5, 29, 2, 0, 2}, /* RxD4 */ + {5, 28, 2, 0, 2}, /* RxD5 */ + {5, 27, 2, 0, 3}, /* RxD6 */ + {5, 26, 2, 0, 2}, /* RxD7 */ + {5, 11, 1, 0, 2}, /* TX_EN */ + {5, 24, 1, 0, 2}, /* TX_ER */ + {5, 16, 2, 0, 2}, /* RX_DV */ + {5, 30, 2, 0, 2}, /* RX_ER */ + {5, 17, 2, 0, 2}, /* RX_CLK */ + {5, 19, 1, 0, 2}, /* GTX_CLK */ + {1, 31, 2, 0, 3}, /* GTX125 */ + {4, 6, 3, 0, 2}, /* MDIO */ + {4, 5, 1, 0, 2}, /* MDC */ + {0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */ +}; + + +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) +extern void ddr_enable_ecc(unsigned int dram_size); +#endif + +extern long int spd_sdram(void); + +void local_bus_init(void); +void sdram_init(void); + +int board_early_init_f (void) +{ + /* + * Initialize local bus. + */ + local_bus_init (); + + enable_8568mds_duart(); + enable_8568mds_flash_write(); +#if defined(CONFIG_QE) && !defined(CONFIG_eTSEC_MDIO_BUS) + enable_8568mds_qe_mdio(); +#endif + +#ifdef CFG_I2C2_OFFSET + /* Enable I2C2_SCL and I2C2_SDA */ + volatile struct par_io *port_c; + port_c = (struct par_io*)(CFG_IMMR + 0xe0140); + port_c->cpdir2 |= 0x0f000000; + port_c->cppar2 &= ~0x0f000000; + port_c->cppar2 |= 0x0a000000; +#endif + + return 0; +} + +int checkboard (void) +{ + printf ("Board: 8568 MDS\n"); + + return 0; +} + +long int +initdram(int board_type) +{ + long dram_size = 0; + + puts("Initializing\n"); + +#if defined(CONFIG_DDR_DLL) + { + /* + * Work around to stabilize DDR DLL MSYNC_IN. + * Errata DDR9 seems to have been fixed. + * This is now the workaround for Errata DDR11: + * Override DLL = 1, Course Adj = 1, Tap Select = 0 + */ + + volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR); + + gur->ddrdllcr = 0x81000000; + asm("sync;isync;msync"); + udelay(200); + } +#endif + dram_size = spd_sdram(); + +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) + /* + * Initialize and enable DDR ECC. + */ + ddr_enable_ecc(dram_size); +#endif + /* + * SDRAM Initialization + */ + sdram_init(); + + puts(" DDR: "); + return dram_size; +} + +/* + * Initialize Local Bus + */ +void +local_bus_init(void) +{ + volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR); + volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR); + + uint clkdiv; + uint lbc_hz; + sys_info_t sysinfo; + + get_sys_info(&sysinfo); + clkdiv = (lbc->lcrr & 0x0f) * 2; + lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; + + gur->lbiuiplldcr1 = 0x00078080; + if (clkdiv == 16) { + gur->lbiuiplldcr0 = 0x7c0f1bf0; + } else if (clkdiv == 8) { + gur->lbiuiplldcr0 = 0x6c0f1bf0; + } else if (clkdiv == 4) { + gur->lbiuiplldcr0 = 0x5c0f1bf0; + } + + lbc->lcrr |= 0x00030000; + + asm("sync;isync;msync"); +} + +/* + * Initialize SDRAM memory on the Local Bus. + */ +void +sdram_init(void) +{ +#if defined(CFG_OR2_PRELIM) && defined(CFG_BR2_PRELIM) + + uint idx; + volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR); + uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE; + uint lsdmr_common; + + puts(" SDRAM: "); + + print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n"); + + /* + * Setup SDRAM Base and Option Registers + */ + lbc->or2 = CFG_OR2_PRELIM; + asm("msync"); + + lbc->br2 = CFG_BR2_PRELIM; + asm("msync"); + + lbc->lbcr = CFG_LBC_LBCR; + asm("msync"); + + + lbc->lsrt = CFG_LBC_LSRT; + lbc->mrtpr = CFG_LBC_MRTPR; + asm("msync"); + + /* + * MPC8568 uses "new" 15-16 style addressing. + */ + lsdmr_common = CFG_LBC_LSDMR_COMMON; + lsdmr_common |= CFG_LBC_LSDMR_BSMA1516; + + /* + * Issue PRECHARGE ALL command. + */ + lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_PCHALL; + asm("sync;msync"); + *sdram_addr = 0xff; + ppcDcbf((unsigned long) sdram_addr); + udelay(100); + + /* + * Issue 8 AUTO REFRESH commands. + */ + for (idx = 0; idx < 8; idx++) { + lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_ARFRSH; + asm("sync;msync"); + *sdram_addr = 0xff; + ppcDcbf((unsigned long) sdram_addr); + udelay(100); + } + + /* + * Issue 8 MODE-set command. + */ + lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_MRW; + asm("sync;msync"); + *sdram_addr = 0xff; + ppcDcbf((unsigned long) sdram_addr); + udelay(100); + + /* + * Issue NORMAL OP command. + */ + lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_NORMAL; + asm("sync;msync"); + *sdram_addr = 0xff; + ppcDcbf((unsigned long) sdram_addr); + udelay(200); /* Overkill. Must wait > 200 bus cycles */ + +#endif /* enable SDRAM init */ +} + +#if defined(CFG_DRAM_TEST) +int +testdram(void) +{ + uint *pstart = (uint *) CFG_MEMTEST_START; + uint *pend = (uint *) CFG_MEMTEST_END; + uint *p; + + printf("Testing DRAM from 0x%08x to 0x%08x\n", + CFG_MEMTEST_START, + CFG_MEMTEST_END); + + printf("DRAM test phase 1:\n"); + for (p = pstart; p < pend; p++) + *p = 0xaaaaaaaa; + + for (p = pstart; p < pend; p++) { + if (*p != 0xaaaaaaaa) { + printf ("DRAM test fails at: %08x\n", (uint) p); + return 1; + } + } + + printf("DRAM test phase 2:\n"); + for (p = pstart; p < pend; p++) + *p = 0x55555555; + + for (p = pstart; p < pend; p++) { + if (*p != 0x55555555) { + printf ("DRAM test fails at: %08x\n", (uint) p); + return 1; + } + } + + printf("DRAM test passed.\n"); + return 0; +} +#endif + +#if defined(CONFIG_PCI) +#ifndef CONFIG_PCI_PNP +static struct pci_config_table pci_mpc8568mds_config_table[] = { + { + PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, + pci_cfgfunc_config_device, + {PCI_ENET0_IOADDR, + PCI_ENET0_MEMADDR, + PCI_COMMON_MEMORY | PCI_COMMAND_MASTER} + }, + {} +}; +#endif + +static struct pci_controller pci1_hose = { +#ifndef CONFIG_PCI_PNP + config_table: pci_mpc8568mds_config_table, +#endif +}; +#endif /* CONFIG_PCI */ + +#ifdef CONFIG_PCIE1 +static struct pci_controller pcie1_hose; +#endif /* CONFIG_PCIE1 */ + +int first_free_busno = 0; + +/* + * pib_init() -- Initialize the PCA9555 IO expander on the PIB board + */ +void +pib_init(void) +{ + u8 val8, orig_i2c_bus; + /* + * Assign PIB PMC2/3 to PCI bus + */ + + /*switch temporarily to I2C bus #2 */ + orig_i2c_bus = i2c_get_bus_num(); + i2c_set_bus_num(1); + + val8 = 0x00; + i2c_write(0x23, 0x6, 1, &val8, 1); + i2c_write(0x23, 0x7, 1, &val8, 1); + val8 = 0xff; + i2c_write(0x23, 0x2, 1, &val8, 1); + i2c_write(0x23, 0x3, 1, &val8, 1); + + val8 = 0x00; + i2c_write(0x26, 0x6, 1, &val8, 1); + val8 = 0x34; + i2c_write(0x26, 0x7, 1, &val8, 1); + val8 = 0xf9; + i2c_write(0x26, 0x2, 1, &val8, 1); + val8 = 0xff; + i2c_write(0x26, 0x3, 1, &val8, 1); + + val8 = 0x00; + i2c_write(0x27, 0x6, 1, &val8, 1); + i2c_write(0x27, 0x7, 1, &val8, 1); + val8 = 0xff; + i2c_write(0x27, 0x2, 1, &val8, 1); + val8 = 0xef; + i2c_write(0x27, 0x3, 1, &val8, 1); + + asm("eieio"); +} + +#ifdef CONFIG_PCI +void +pci_init_board(void) +{ + volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR); + uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; + uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16; + +#ifdef CONFIG_PCI1 +{ + pib_init(); + + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR; + extern void fsl_pci_init(struct pci_controller *hose); + struct pci_controller *hose = &pci1_hose; + + uint pci_32 = 1; /* PORDEVSR[15] */ + uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB; /* PORDEVSR[14] */ + uint pci_clk_sel = gur->porpllsr & MPC85xx_PORDEVSR_PCI1_SPD; /* PORPLLSR[16] */ + + uint pci_agent = (host_agent == 3) || (host_agent == 4 ) || (host_agent == 6); + + uint pci_speed = 66666000; + + if (!(gur->devdisr & MPC85xx_DEVDISR_PCI1)) { + printf (" PCI: %d bit, %s MHz, %s, %s, %s\n", + (pci_32) ? 32 : 64, + (pci_speed == 33333000) ? "33" : + (pci_speed == 66666000) ? "66" : "unknown", + pci_clk_sel ? "sync" : "async", + pci_agent ? "agent" : "host", + pci_arb ? "arbiter" : "external-arbiter" + ); + + /* inbound */ + pci_set_region(hose->regions + 0, + CFG_PCI_MEMORY_BUS, + CFG_PCI_MEMORY_PHYS, + CFG_PCI_MEMORY_SIZE, + PCI_REGION_MEM | PCI_REGION_MEMORY); + + /* outbound memory */ + pci_set_region(hose->regions + 1, + CFG_PCI1_MEM_BASE, + CFG_PCI1_MEM_PHYS, + CFG_PCI1_MEM_SIZE, + PCI_REGION_MEM); + + /* outbound io */ + pci_set_region(hose->regions + 2, + CFG_PCI1_IO_BASE, + CFG_PCI1_IO_PHYS, + CFG_PCI1_IO_SIZE, + PCI_REGION_IO); + + hose->region_count = 3; + + hose->first_busno = first_free_busno; + pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); + + fsl_pci_init(hose); + first_free_busno = hose->last_busno+1; + printf ("PCI on bus %02x - %02x\n",hose->first_busno,hose->last_busno); + } else { + printf (" PCI: disabled\n"); + } +} +#else + gur->devdisr |= MPC85xx_DEVDISR_PCI1; /* disable */ +#endif + +#ifdef CONFIG_PCIE1 +{ + volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE1_ADDR; + extern void fsl_pci_init(struct pci_controller *hose); + struct pci_controller *hose = &pcie1_hose; + int pcie_ep = (host_agent == 0) || (host_agent == 2 ) || (host_agent == 3); + + int pcie_configured = io_sel >= 1; + + if (pcie_configured && !(gur->devdisr & MPC85xx_DEVDISR_PCIE)){ + printf ("\n PCIE connected to slot as %s (base address %x)", + pcie_ep ? "End Point" : "Root Complex", + (uint)pci); + + if (pci->pme_msg_det) { + pci->pme_msg_det = 0xffffffff; + debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det); + } + printf ("\n"); + + /* inbound */ + pci_set_region(hose->regions + 0, + CFG_PCI_MEMORY_BUS, + CFG_PCI_MEMORY_PHYS, + CFG_PCI_MEMORY_SIZE, + PCI_REGION_MEM | PCI_REGION_MEMORY); + + /* outbound memory */ + pci_set_region(hose->regions + 1, + CFG_PCIE1_MEM_BASE, + CFG_PCIE1_MEM_PHYS, + CFG_PCIE1_MEM_SIZE, + PCI_REGION_MEM); + + /* outbound io */ + pci_set_region(hose->regions + 2, + CFG_PCIE1_IO_BASE, + CFG_PCIE1_IO_PHYS, + CFG_PCIE1_IO_SIZE, + PCI_REGION_IO); + + hose->region_count = 3; + + hose->first_busno=first_free_busno; + pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); + + fsl_pci_init(hose); + printf ("PCIE on bus %02x - %02x\n",hose->first_busno,hose->last_busno); + + first_free_busno=hose->last_busno+1; + + } else { + printf (" PCIE: disabled\n"); + } +} +#else + gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */ +#endif +} +#endif /* CONFIG_PCI */ + +#if defined(CONFIG_OF_BOARD_SETUP) +void +ft_board_setup(void *blob, bd_t *bd) +{ + int node, tmp[2]; + const char *path; + + ft_cpu_setup(blob, bd); + + node = fdt_path_offset(blob, "/aliases"); + tmp[0] = 0; + if (node >= 0) { +#ifdef CONFIG_PCI1 + path = fdt_getprop(blob, node, "pci0", NULL); + if (path) { + tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno; + do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); + } +#endif +#ifdef CONFIG_PCIE1 + path = fdt_getprop(blob, node, "pci1", NULL); + if (path) { + tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno; + do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); + } +#endif + } +} +#endif |