diff options
Diffstat (limited to 'board/freescale/mx53loco/mx53loco.c')
| -rw-r--r-- | board/freescale/mx53loco/mx53loco.c | 87 |
1 files changed, 18 insertions, 69 deletions
diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c index a11e8831866..81c511cdc18 100644 --- a/board/freescale/mx53loco/mx53loco.c +++ b/board/freescale/mx53loco/mx53loco.c @@ -31,12 +31,13 @@ #include <asm/arch/iomux.h> #include <asm/arch/clock.h> #include <asm/errno.h> +#include <asm/imx-common/mx5_video.h> #include <netdev.h> #include <i2c.h> #include <mmc.h> #include <fsl_esdhc.h> #include <asm/gpio.h> -#include <pmic.h> +#include <power/pmic.h> #include <dialog_pmic.h> #include <fsl_pmic.h> #include <linux/fb.h> @@ -344,10 +345,16 @@ static int power_init(void) unsigned int val; int ret = -1; struct pmic *p; + int retval; if (!i2c_probe(CONFIG_SYS_DIALOG_PMIC_I2C_ADDR)) { - pmic_dialog_init(); - p = get_pmic(); + retval = pmic_dialog_init(I2C_PMIC); + if (retval) + return retval; + + p = pmic_get("DIALOG_PMIC"); + if (!p) + return -ENODEV; /* Set VDDA to 1.25V */ val = DA9052_BUCKCORE_BCOREEN | DA_BUCKCORE_VBCORE_1_250V; @@ -363,8 +370,13 @@ static int power_init(void) } if (!i2c_probe(CONFIG_SYS_FSL_PMIC_I2C_ADDR)) { - pmic_init(); - p = get_pmic(); + retval = pmic_init(I2C_PMIC); + if (retval) + return retval; + + p = pmic_get("DIALOG_PMIC"); + if (!p) + return -ENODEV; /* Set VDDGP to 1.25V for 1GHz on SW1 */ pmic_reg_read(p, REG_SW_0, &val); @@ -412,74 +424,11 @@ static void clock_1GHz(void) printf("CPU: Switch DDR clock to 400MHz failed\n"); } -static struct fb_videomode const claa_wvga = { - .name = "CLAA07LC0ACW", - .refresh = 57, - .xres = 800, - .yres = 480, - .pixclock = 37037, - .left_margin = 40, - .right_margin = 60, - .upper_margin = 10, - .lower_margin = 10, - .hsync_len = 20, - .vsync_len = 10, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED -}; - -void lcd_iomux(void) -{ - mxc_request_iomux(MX53_PIN_DI0_DISP_CLK, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DI0_PIN15, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DI0_PIN2, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DI0_PIN3, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DISP0_DAT0, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DISP0_DAT1, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DISP0_DAT2, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DISP0_DAT3, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DISP0_DAT4, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DISP0_DAT5, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DISP0_DAT6, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DISP0_DAT7, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DISP0_DAT8, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DISP0_DAT9, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DISP0_DAT10, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DISP0_DAT11, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DISP0_DAT12, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DISP0_DAT13, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DISP0_DAT14, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DISP0_DAT15, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DISP0_DAT16, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DISP0_DAT17, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DISP0_DAT18, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DISP0_DAT19, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DISP0_DAT20, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DISP0_DAT21, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DISP0_DAT22, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DISP0_DAT23, IOMUX_CONFIG_ALT0); - - /* Turn on GPIO backlight */ - mxc_request_iomux(MX53_PIN_EIM_D24, IOMUX_CONFIG_ALT1); - gpio_direction_output(MX53LOCO_LCD_POWER, 1); - - /* Turn on display contrast */ - mxc_request_iomux(MX53_PIN_GPIO_1, IOMUX_CONFIG_ALT1); - gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_GPIO_1), 1); -} - -void lcd_enable(void) -{ - int ret = ipuv3_fb_init(&claa_wvga, 0, IPU_PIX_FMT_RGB565); - if (ret) - printf("LCD cannot be configured: %d\n", ret); -} - int board_early_init_f(void) { setup_iomux_uart(); setup_iomux_fec(); - lcd_iomux(); + setup_iomux_lcd(); return 0; } |