5 files changed, 22 insertions, 60 deletions
diff --git a/board/freescale/imx8mm_evk/spl.c b/board/freescale/imx8mm_evk/spl.c
index 7eeec6c485a..4d963246856 100644
--- a/board/freescale/imx8mm_evk/spl.c
+++ b/board/freescale/imx8mm_evk/spl.c
@@ -57,7 +57,7 @@ void spl_board_init(void)
 
 		ret = uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(caam_jr), &dev);
 		if (ret)
-			printf("Failed to initialize %s: %d\n", dev->name, ret);
+			printf("Failed to initialize caam_jr: %d\n", ret);
 	}
 	puts("Normal Boot\n");
 }
@@ -72,23 +72,6 @@ int board_fit_config_name_match(const char *name)
 }
 #endif
 
-#define WDOG_PAD_CTRL	(PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)
-
-static iomux_v3_cfg_t const wdog_pads[] = {
-	IMX8MM_PAD_GPIO1_IO02_WDOG1_WDOG_B  | MUX_PAD_CTRL(WDOG_PAD_CTRL),
-};
-
-int board_early_init_f(void)
-{
-	struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
-
-	imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
-
-	set_wdog_reset(wdog);
-
-	return 0;
-}
-
 static int power_init_board(void)
 {
 	struct udevice *dev;
@@ -135,8 +118,6 @@ void board_init_f(ulong dummy)
 
 	init_uart_clk(1);
 
-	board_early_init_f();
-
 	timer_init();
 
 	/* Clear the BSS. */
diff --git a/board/freescale/imx8mn_evk/spl.c b/board/freescale/imx8mn_evk/spl.c
index 63f335be3b0..14cb51368f8 100644
--- a/board/freescale/imx8mn_evk/spl.c
+++ b/board/freescale/imx8mn_evk/spl.c
@@ -52,7 +52,7 @@ void spl_board_init(void)
 	if (IS_ENABLED(CONFIG_FSL_CAAM)) {
 		ret = uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(caam_jr), &dev);
 		if (ret)
-			printf("Failed to initialize %s: %d\n", dev->name, ret);
+			printf("Failed to initialize caam_jr: %d\n", ret);
 	}
 	puts("Normal Boot\n");
 
@@ -115,23 +115,6 @@ int board_fit_config_name_match(const char *name)
 }
 #endif
 
-#define WDOG_PAD_CTRL	(PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)
-
-static iomux_v3_cfg_t const wdog_pads[] = {
-	IMX8MN_PAD_GPIO1_IO02__WDOG1_WDOG_B  | MUX_PAD_CTRL(WDOG_PAD_CTRL),
-};
-
-int board_early_init_f(void)
-{
-	struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
-
-	imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
-
-	set_wdog_reset(wdog);
-
-	return 0;
-}
-
 void board_init_f(ulong dummy)
 {
 	int ret;
@@ -140,8 +123,6 @@ void board_init_f(ulong dummy)
 
 	init_uart_clk(1);
 
-	board_early_init_f();
-
 	timer_init();
 
 	/* Clear the BSS. */
diff --git a/board/freescale/imx8mp_evk/imx8mp_evk.c b/board/freescale/imx8mp_evk/imx8mp_evk.c
index fb6c61c39e7..8971a827df3 100644
--- a/board/freescale/imx8mp_evk/imx8mp_evk.c
+++ b/board/freescale/imx8mp_evk/imx8mp_evk.c
@@ -20,23 +20,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#define WDOG_PAD_CTRL	(PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)
-
-static iomux_v3_cfg_t const wdog_pads[] = {
-	MX8MP_PAD_GPIO1_IO02__WDOG1_WDOG_B  | MUX_PAD_CTRL(WDOG_PAD_CTRL),
-};
-
-int board_early_init_f(void)
-{
-	struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
-
-	imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
-
-	set_wdog_reset(wdog);
-
-	return 0;
-}
-
 static void setup_fec(void)
 {
 	struct iomuxc_gpr_base_regs *gpr =
diff --git a/board/freescale/imx8mp_evk/spl.c b/board/freescale/imx8mp_evk/spl.c
index 503a752ae98..719b1f6d7da 100644
--- a/board/freescale/imx8mp_evk/spl.c
+++ b/board/freescale/imx8mp_evk/spl.c
@@ -43,7 +43,7 @@ void spl_board_init(void)
 
 		ret = uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(caam_jr), &dev);
 		if (ret)
-			printf("Failed to initialize %s: %d\n", dev->name, ret);
+			printf("Failed to initialize caam_jr: %d\n", ret);
 	}
 	/*
 	 * Set GIC clock to 500Mhz for OD VDD_SOC. Kernel driver does
@@ -134,8 +134,6 @@ void board_init_f(ulong dummy)
 
 	init_uart_clk(1);
 
-	board_early_init_f();
-
 	ret = spl_early_init();
 	if (ret) {
 		debug("spl_init() failed: %d\n", ret);
diff --git a/board/freescale/imx8ulp_evk/spl.c b/board/freescale/imx8ulp_evk/spl.c
index 66bfc2bd0ca..ece9ff26e92 100644
--- a/board/freescale/imx8ulp_evk/spl.c
+++ b/board/freescale/imx8ulp_evk/spl.c
@@ -58,6 +58,23 @@ int power_init_board(void)
 	return 0;
 }
 
+void display_ele_fw_version(void)
+{
+	u32 fw_version, sha1, res;
+	int ret;
+
+	ret = ahab_get_fw_version(&fw_version, &sha1, &res);
+	if (ret) {
+		printf("ahab get firmware version failed %d, 0x%x\n", ret, res);
+	} else {
+		printf("ELE firmware version %u.%u.%u-%x",
+		       (fw_version & (0x00ff0000)) >> 16,
+		       (fw_version & (0x0000ff00)) >> 8,
+		       (fw_version & (0x000000ff)), sha1);
+		((fw_version & (0x80000000)) >> 31) == 1 ? puts("-dirty\n") : puts("\n");
+	}
+}
+
 void spl_board_init(void)
 {
 	struct udevice *dev;
@@ -77,6 +94,8 @@ void spl_board_init(void)
 
 	puts("Normal Boot\n");
 
+	display_ele_fw_version();
+
 	/* After AP set iomuxc0, the i2c can't work, Need M33 to set it now */
 
 	/* Load the lposc fuse to work around ROM issue. The fuse depends on S400 to read. */