1 files changed, 139 insertions, 0 deletions
diff --git a/board/innokom/innokom.c b/board/innokom/innokom.c
new file mode 100644
index 00000000000..7d2702f6582
--- /dev/null
+++ b/board/innokom/innokom.c
@@ -0,0 +1,139 @@
+/*
+ * (C) Copyright 2002
+ * Robert Schwebel, Pengutronix, r.schwebel@pengutronix.de
+ * Kyle Harris, Nexus Technologies, Inc., kharris@nexus-tech.net
+ * Marius Groeger, Sysgo Real-Time Solutions GmbH, mgroeger@sysgo.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/pxa-regs.h>
+
+#ifdef CONFIG_SHOW_BOOT_PROGRESS
+# define SHOW_BOOT_PROGRESS(arg)        show_boot_progress(arg)
+#else
+# define SHOW_BOOT_PROGRESS(arg)
+#endif
+
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+
+/**
+ * board_init: - setup some data structures
+ *
+ * @return: 0 in case of success
+ */
+
+int board_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	/* memory and cpu-speed are setup before relocation */
+	/* so we do _nothing_ here */
+
+	/* arch number of Innokom board */
+	gd->bd->bi_arch_number = 258;
+
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = 0xa0000100;
+
+	return 0;
+}
+
+
+/**
+ * dram_init: - setup dynamic RAM
+ *
+ * @return: 0 in case of success
+ */
+
+int dram_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+	return 0;
+}
+
+
+/**
+ * innokom_set_led: - switch LEDs on or off
+ *
+ * @param led:   LED to switch (0,1,2)
+ * @param state: switch on (1) or off (0)
+ */
+
+void innokom_set_led(int led, int state)
+{
+	switch(led) {
+/*
+		case 0: if (state==1) {
+				GPCR0 |= CSB226_USER_LED0;
+			} else if (state==0) {
+				GPSR0 |= CSB226_USER_LED0;
+			}
+			break;
+
+		case 1: if (state==1) {
+                                GPCR0 |= CSB226_USER_LED1;
+                        } else if (state==0) {
+                                GPSR0 |= CSB226_USER_LED1;
+                        }
+                        break;
+
+		case 2: if (state==1) {
+                                GPCR0 |= CSB226_USER_LED2;
+                        } else if (state==0) {
+                                GPSR0 |= CSB226_USER_LED2;
+                        }
+                        break;
+*/
+	}
+
+	return;
+}
+
+
+/**
+ * show_boot_progress: - indicate state of the boot process
+ *
+ * @param status: Status number - see README for details.
+ *
+ * The CSB226 does only have 3 LEDs, so we switch them on at the most
+ * important states (1, 5, 15).
+ */
+
+void show_boot_progress (int status)
+{
+	switch(status) {
+/*
+		case  1: csb226_set_led(0,1); break;
+		case  5: csb226_set_led(1,1); break;
+		case 15: csb226_set_led(2,1); break;
+*/
+	}
+
+	return;
+}
+