diff options
Diffstat (limited to 'board/innokom/lowlevel_init.S')
| -rw-r--r-- | board/innokom/lowlevel_init.S | 66 |
1 files changed, 33 insertions, 33 deletions
diff --git a/board/innokom/lowlevel_init.S b/board/innokom/lowlevel_init.S index 4c9f10ffbd6..9892430a1c7 100644 --- a/board/innokom/lowlevel_init.S +++ b/board/innokom/lowlevel_init.S @@ -29,7 +29,7 @@ #include <version.h> #include <asm/arch/pxa-regs.h> -DRAM_SIZE: .long CFG_DRAM_SIZE +DRAM_SIZE: .long CONFIG_SYS_DRAM_SIZE /* wait for coprocessor write complete */ .macro CPWAIT reg @@ -54,71 +54,71 @@ lowlevel_init: /* Set up GPIO pins first ----------------------------------------- */ ldr r0, =GPSR0 - ldr r1, =CFG_GPSR0_VAL + ldr r1, =CONFIG_SYS_GPSR0_VAL str r1, [r0] ldr r0, =GPSR1 - ldr r1, =CFG_GPSR1_VAL + ldr r1, =CONFIG_SYS_GPSR1_VAL str r1, [r0] ldr r0, =GPSR2 - ldr r1, =CFG_GPSR2_VAL + ldr r1, =CONFIG_SYS_GPSR2_VAL str r1, [r0] ldr r0, =GPCR0 - ldr r1, =CFG_GPCR0_VAL + ldr r1, =CONFIG_SYS_GPCR0_VAL str r1, [r0] ldr r0, =GPCR1 - ldr r1, =CFG_GPCR1_VAL + ldr r1, =CONFIG_SYS_GPCR1_VAL str r1, [r0] ldr r0, =GPCR2 - ldr r1, =CFG_GPCR2_VAL + ldr r1, =CONFIG_SYS_GPCR2_VAL str r1, [r0] ldr r0, =GPDR0 - ldr r1, =CFG_GPDR0_VAL + ldr r1, =CONFIG_SYS_GPDR0_VAL str r1, [r0] ldr r0, =GPDR1 - ldr r1, =CFG_GPDR1_VAL + ldr r1, =CONFIG_SYS_GPDR1_VAL str r1, [r0] ldr r0, =GPDR2 - ldr r1, =CFG_GPDR2_VAL + ldr r1, =CONFIG_SYS_GPDR2_VAL str r1, [r0] ldr r0, =GAFR0_L - ldr r1, =CFG_GAFR0_L_VAL + ldr r1, =CONFIG_SYS_GAFR0_L_VAL str r1, [r0] ldr r0, =GAFR0_U - ldr r1, =CFG_GAFR0_U_VAL + ldr r1, =CONFIG_SYS_GAFR0_U_VAL str r1, [r0] ldr r0, =GAFR1_L - ldr r1, =CFG_GAFR1_L_VAL + ldr r1, =CONFIG_SYS_GAFR1_L_VAL str r1, [r0] ldr r0, =GAFR1_U - ldr r1, =CFG_GAFR1_U_VAL + ldr r1, =CONFIG_SYS_GAFR1_U_VAL str r1, [r0] ldr r0, =GAFR2_L - ldr r1, =CFG_GAFR2_L_VAL + ldr r1, =CONFIG_SYS_GAFR2_L_VAL str r1, [r0] ldr r0, =GAFR2_U - ldr r1, =CFG_GAFR2_U_VAL + ldr r1, =CONFIG_SYS_GAFR2_U_VAL str r1, [r0] ldr r0, =PSSR /* enable GPIO pins */ - ldr r1, =CFG_PSSR_VAL + ldr r1, =CONFIG_SYS_PSSR_VAL str r1, [r0] /* ldr r3, =MSC1 / low - bank 2 Lubbock Registers / SRAM */ -/* ldr r2, =CFG_MSC1_VAL / high - bank 3 Ethernet Controller */ +/* ldr r2, =CONFIG_SYS_MSC1_VAL / high - bank 3 Ethernet Controller */ /* str r2, [r3] / need to set MSC1 before trying to write to the HEX LEDs */ /* ldr r2, [r3] / need to read it back to make sure the value latches (see MSC section of manual) */ /* */ @@ -168,17 +168,17 @@ mem_init: /* MSC registers: timing, bus width, mem type */ /* MSC0: nCS(0,1) */ - ldr r2, =CFG_MSC0_VAL + ldr r2, =CONFIG_SYS_MSC0_VAL str r2, [r1, #MSC0_OFFSET] ldr r2, [r1, #MSC0_OFFSET] /* read back to ensure */ /* that data latches */ /* MSC1: nCS(2,3) */ - ldr r2, =CFG_MSC1_VAL + ldr r2, =CONFIG_SYS_MSC1_VAL str r2, [r1, #MSC1_OFFSET] ldr r2, [r1, #MSC1_OFFSET] /* MSC2: nCS(4,5) */ - ldr r2, =CFG_MSC2_VAL + ldr r2, =CONFIG_SYS_MSC2_VAL str r2, [r1, #MSC2_OFFSET] ldr r2, [r1, #MSC2_OFFSET] @@ -187,37 +187,37 @@ mem_init: /* ---------------------------------------------------------------- */ /* MECR: Memory Expansion Card Register */ - ldr r2, =CFG_MECR_VAL + ldr r2, =CONFIG_SYS_MECR_VAL str r2, [r1, #MECR_OFFSET] ldr r2, [r1, #MECR_OFFSET] /* MCMEM0: Card Interface slot 0 timing */ - ldr r2, =CFG_MCMEM0_VAL + ldr r2, =CONFIG_SYS_MCMEM0_VAL str r2, [r1, #MCMEM0_OFFSET] ldr r2, [r1, #MCMEM0_OFFSET] /* MCMEM1: Card Interface slot 1 timing */ - ldr r2, =CFG_MCMEM1_VAL + ldr r2, =CONFIG_SYS_MCMEM1_VAL str r2, [r1, #MCMEM1_OFFSET] ldr r2, [r1, #MCMEM1_OFFSET] /* MCATT0: Card Interface Attribute Space Timing, slot 0 */ - ldr r2, =CFG_MCATT0_VAL + ldr r2, =CONFIG_SYS_MCATT0_VAL str r2, [r1, #MCATT0_OFFSET] ldr r2, [r1, #MCATT0_OFFSET] /* MCATT1: Card Interface Attribute Space Timing, slot 1 */ - ldr r2, =CFG_MCATT1_VAL + ldr r2, =CONFIG_SYS_MCATT1_VAL str r2, [r1, #MCATT1_OFFSET] ldr r2, [r1, #MCATT1_OFFSET] /* MCIO0: Card Interface I/O Space Timing, slot 0 */ - ldr r2, =CFG_MCIO0_VAL + ldr r2, =CONFIG_SYS_MCIO0_VAL str r2, [r1, #MCIO0_OFFSET] ldr r2, [r1, #MCIO0_OFFSET] /* MCIO1: Card Interface I/O Space Timing, slot 1 */ - ldr r2, =CFG_MCIO1_VAL + ldr r2, =CONFIG_SYS_MCIO1_VAL str r2, [r1, #MCIO1_OFFSET] ldr r2, [r1, #MCIO1_OFFSET] @@ -239,7 +239,7 @@ mem_init: /* Before accessing MDREFR we need a valid DRI field, so we set */ /* this to power on defaults + DRI field. */ - ldr r3, =CFG_MDREFR_VAL + ldr r3, =CONFIG_SYS_MDREFR_VAL ldr r2, =0xFFF and r3, r3, r2 ldr r4, =0x03ca4000 @@ -269,7 +269,7 @@ mem_init: /* Step 4a: assert MDREFR:K?RUN and configure */ /* MDREFR:K1DB2 and MDREFR:K2DB2 as desired. */ - ldr r4, =CFG_MDREFR_VAL + ldr r4, =CONFIG_SYS_MDREFR_VAL str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ ldr r4, [r1, #MDREFR_OFFSET] @@ -292,7 +292,7 @@ mem_init: /* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to */ /* configure but not enable each SDRAM partition pair. */ - ldr r4, =CFG_MDCNFG_VAL + ldr r4, =CONFIG_SYS_MDCNFG_VAL bic r4, r4, #(MDCNFG_DE0|MDCNFG_DE1) str r4, [r1, #MDCNFG_OFFSET] /* write back MDCNFG */ @@ -325,7 +325,7 @@ mem_init: /* Jan 2003, Errata #116, page 30. */ - ldr r3, =CFG_DRAM_BASE + ldr r3, =CONFIG_SYS_DRAM_BASE str r2, [r3] str r2, [r3] str r2, [r3] @@ -345,7 +345,7 @@ mem_init: /* Step 4h: Write MDMRS. */ - ldr r2, =CFG_MDMRS_VAL + ldr r2, =CONFIG_SYS_MDMRS_VAL str r2, [r1, #MDMRS_OFFSET] |