diff options
Diffstat (limited to 'board/nc650/nc650.c')
| -rw-r--r-- | board/nc650/nc650.c | 207 |
1 files changed, 207 insertions, 0 deletions
diff --git a/board/nc650/nc650.c b/board/nc650/nc650.c new file mode 100644 index 00000000000..376dbbdca32 --- /dev/null +++ b/board/nc650/nc650.c @@ -0,0 +1,207 @@ +/* + * (C) Copyright 2001 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <config.h> +#include <mpc8xx.h> + +/* + * Memory Controller Using + * + * CS0 - Flash memory (0x40000000) + * CS3 - SDRAM (0x00000000} + */ + +/* ------------------------------------------------------------------------- */ + +#define _not_used_ 0xffffffff + +const uint sdram_table[] = { + /* single read. (offset 0 in upm RAM) */ + 0x1f07fc04, 0xeeaefc04, 0x11adfc04, 0xefbbbc00, + 0x1ff77c47, + + /* MRS initialization (offset 5) */ + + 0x1ff77c34, 0xefeabc34, 0x1fb57c35, + + /* burst read. (offset 8 in upm RAM) */ + 0x1f07fc04, 0xeeaefc04, 0x10adfc04, 0xf0affc00, + 0xf0affc00, 0xf1affc00, 0xefbbbc00, 0x1ff77c47, + _not_used_, _not_used_, _not_used_, _not_used_, + _not_used_, _not_used_, _not_used_, _not_used_, + + /* single write. (offset 18 in upm RAM) */ + 0x1f27fc04, 0xeeaebc00, 0x01b93c04, 0x1ff77c47, + _not_used_, _not_used_, _not_used_, _not_used_, + + /* burst write. (offset 20 in upm RAM) */ + 0x1f07fc04, 0xeeaebc00, 0x10ad7c00, 0xf0affc00, + 0xf0affc00, 0xe1bbbc04, 0x1ff77c47, _not_used_, + _not_used_, _not_used_, _not_used_, _not_used_, + _not_used_, _not_used_, _not_used_, _not_used_, + + /* refresh. (offset 30 in upm RAM) */ + 0x1ff5fc84, 0xfffffc04, 0xfffffc04, 0xfffffc04, + 0xfffffc84, 0xfffffc07, _not_used_, _not_used_, + _not_used_, _not_used_, _not_used_, _not_used_, + + /* exception. (offset 3c in upm RAM) */ + 0x7ffffc07, _not_used_, _not_used_, _not_used_ +}; + +/* ------------------------------------------------------------------------- */ + +/* + * Check Board Identity: + */ + +int checkboard (void) +{ + puts ("Board: NC650\n"); + return 0; +} + +/* ------------------------------------------------------------------------- */ + +static long int dram_size (long int, long int *, long int); + +/* ------------------------------------------------------------------------- */ + +long int initdram (int board_type) +{ + volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile memctl8xx_t *memctl = &immap->im_memctl; + long int size8, size9; + long int size_b0 = 0; + unsigned long reg; + + upmconfig (UPMA, (uint *) sdram_table, + sizeof (sdram_table) / sizeof (uint)); + + /* + * Preliminary prescaler for refresh (depends on number of + * banks): This value is selected for four cycles every 62.4 us + * with two SDRAM banks or four cycles every 31.2 us with one + * bank. It will be adjusted after memory sizing. + */ + memctl->memc_mptpr = CFG_MPTPR_2BK_8K; + + memctl->memc_mar = 0x00000088; + + /* + * Map controller bank 1 to the SDRAM bank at + * preliminary address - these have to be modified after the + * SDRAM size has been determined. + */ + memctl->memc_or3 = CFG_OR3_PRELIM; + memctl->memc_br3 = CFG_BR3_PRELIM; + + memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */ + + udelay (200); + + /* perform SDRAM initializsation sequence */ + + memctl->memc_mcr = 0x80006105; /* SDRAM bank 0 */ + udelay (200); + memctl->memc_mcr = 0x80006230; /* SDRAM bank 0 - execute twice */ + udelay (200); + + memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */ + + udelay (1000); + + /* + * Check Bank 0 Memory Size for re-configuration + * + * try 8 column mode + */ + size8 = dram_size (CFG_MAMR_8COL, (ulong *) SDRAM_BASE3_PRELIM, + SDRAM_MAX_SIZE); + + udelay (1000); + + /* + * try 9 column mode + */ + size9 = dram_size (CFG_MAMR_9COL, (ulong *) SDRAM_BASE3_PRELIM, + SDRAM_MAX_SIZE); + + udelay (1000); + + if (size8 < size9) { + size_b0 = size9; + } else { + size_b0 = size8; + memctl->memc_mamr = CFG_MAMR_8COL; + udelay (500); + } + + /* + * Adjust refresh rate depending on SDRAM type, both banks. + * For types > 128 MBit leave it at the current (fast) rate + */ + if ((size_b0 < 0x02000000)) { + /* reduce to 15.6 us (62.4 us / quad) */ + memctl->memc_mptpr = CFG_MPTPR_2BK_4K; + udelay (1000); + } + + /* + * Final mapping + */ + + memctl->memc_or3 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM; + memctl->memc_br3 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V; + + /* adjust refresh rate depending on SDRAM type, one bank */ + reg = memctl->memc_mptpr; + reg >>= 1; /* reduce to CFG_MPTPR_1BK_8K / _4K */ + memctl->memc_mptpr = reg; + + udelay (10000); + + return (size_b0); +} + +/* ------------------------------------------------------------------------- */ + +/* + * Check memory range for valid RAM. A simple memory test determines + * the actually available RAM size between addresses `base' and + * `base + maxsize'. Some (not all) hardware errors are detected: + * - short between address lines + * - short between data lines + */ + +static long int dram_size (long int mamr_value, long int *base, + long int maxsize) +{ + volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile memctl8xx_t *memctl = &immap->im_memctl; + + memctl->memc_mamr = mamr_value; + + return (get_ram_size(base, maxsize)); +} |