summaryrefslogtreecommitdiff
path: root/board/netstal
diff options
context:
space:
mode:
Diffstat (limited to 'board/netstal')
-rw-r--r--board/netstal/hcu4/hcu4.c2
-rw-r--r--board/netstal/hcu5/README.txt6
-rw-r--r--board/netstal/hcu5/hcu5.c24
-rw-r--r--board/netstal/hcu5/init.S20
-rw-r--r--board/netstal/hcu5/sdram.c6
-rw-r--r--board/netstal/hcu5/u-boot.lds2
-rw-r--r--board/netstal/mcu25/mcu25.c8
7 files changed, 34 insertions, 34 deletions
diff --git a/board/netstal/hcu4/hcu4.c b/board/netstal/hcu4/hcu4.c
index c144741822b..aa8a0975cf0 100644
--- a/board/netstal/hcu4/hcu4.c
+++ b/board/netstal/hcu4/hcu4.c
@@ -134,7 +134,7 @@ u32 hcu_get_slot(void)
*/
u32 get_serial_number(void)
{
- u32 serial = in_be32((u32 *)CFG_FLASH_BASE);
+ u32 serial = in_be32((u32 *)CONFIG_SYS_FLASH_BASE);
if (serial == 0xffffffff)
return 0;
diff --git a/board/netstal/hcu5/README.txt b/board/netstal/hcu5/README.txt
index 75c0dd7cd3e..f64987637a8 100644
--- a/board/netstal/hcu5/README.txt
+++ b/board/netstal/hcu5/README.txt
@@ -33,7 +33,7 @@ vector and start running.
On-Chip Memory
--------------
-0xe0010000- 0xe0013fff CFG_OCM_BASE
+0xe0010000- 0xe0013fff CONFIG_SYS_OCM_BASE
The 440EPx includes a 16K on-chip memory that can be placed however
software chooses.
@@ -149,7 +149,7 @@ From now on our copy is in RAM and we will run from there,
setup bd flash info
cpu_init_r: (cpu/ppc4xx/cpu_init.c)
peripheral chip select in using defines like
- CFG_EBC_PB0A, CFG_EBC_PB0C from hcu5.h
+ CONFIG_SYS_EBC_PB0A, CONFIG_SYS_EBC_PB0C from hcu5.h
mem_malloc_init
malloc_bin_reloc
spi_init (r or f)??? (CONFIG_ENV_IS_IN_EEPROM)
@@ -168,4 +168,4 @@ include/ppc440.h
Drivers for serial etc are found under drivers/
Don't ask question if you did not look at the README !!
-Most CFG_* and CONFIG_* switches are mentioned/explained there.
+Most CONFIG_SYS_* and CONFIG_* switches are mentioned/explained there.
diff --git a/board/netstal/hcu5/hcu5.c b/board/netstal/hcu5/hcu5.c
index f3428c2ad88..6f4ec296cb2 100644
--- a/board/netstal/hcu5/hcu5.c
+++ b/board/netstal/hcu5/hcu5.c
@@ -26,7 +26,7 @@
DECLARE_GLOBAL_DATA_PTR;
-extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
#undef BOOTSTRAP_OPTION_A_ACTIVE
@@ -40,9 +40,9 @@ extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
#define SDR0_ECID2 0x0082
#define SDR0_ECID3 0x0083
-#define SYS_IO_ADDRESS (CFG_CS_2 + 0x00e00000)
-#define SYS_SLOT_ADDRESS (CFG_CPLD + 0x00400000)
-#define HCU_DIGITAL_IO_REGISTER (CFG_CPLD + 0x0500000)
+#define SYS_IO_ADDRESS (CONFIG_SYS_CS_2 + 0x00e00000)
+#define SYS_SLOT_ADDRESS (CONFIG_SYS_CPLD + 0x00400000)
+#define HCU_DIGITAL_IO_REGISTER (CONFIG_SYS_CPLD + 0x0500000)
#define HCU_SW_INSTALL_REQUESTED 0x10
/*
@@ -212,7 +212,7 @@ void hcu_led_set(u32 value)
*/
u32 get_serial_number(void)
{
- u32 *serial = (u32 *)CFG_FLASH_BASE;
+ u32 *serial = (u32 *)CONFIG_SYS_FLASH_BASE;
if (in_be32(serial) == 0xffffffff)
return 0;
@@ -243,7 +243,7 @@ int misc_init_r(void)
#ifdef CONFIG_ENV_IS_IN_FLASH
/* Monitor protection ON by default */
(void)flash_protect(FLAG_PROTECT_SET,
- -CFG_MONITOR_LEN,
+ -CONFIG_SYS_MONITOR_LEN,
0xffffffff,
&flash_info[0]);
@@ -399,18 +399,18 @@ void pci_target_init(struct pci_controller *hose)
*/
/* PMM0 Mask/Attribute - disabled b4 setting */
out32r(PCIX0_PMM0MA, 0x00000000);
- out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE); /* PMM0 Local Address */
+ out32r(PCIX0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */
/* PMM0 PCI Low Address */
- out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE);
+ out32r(PCIX0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE);
out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */
/* 512M + No prefetching, and enable region */
out32r(PCIX0_PMM0MA, 0xE0000001);
/* PMM0 Mask/Attribute - disabled b4 setting */
out32r(PCIX0_PMM1MA, 0x00000000);
- out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2); /* PMM0 Local Address */
+ out32r(PCIX0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */
/* PMM0 PCI Low Address */
- out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2);
+ out32r(PCIX0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2);
out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */
/* 512M + No prefetching, and enable region */
out32r(PCIX0_PMM1MA, 0xE0000001);
@@ -426,8 +426,8 @@ void pci_target_init(struct pci_controller *hose)
/* Program the board's subsystem id/vendor id */
pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
- CFG_PCI_SUBSYS_VENDORID);
- pci_write_config_word(0, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_ID);
+ CONFIG_SYS_PCI_SUBSYS_VENDORID);
+ pci_write_config_word(0, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_ID);
/* Configure command register as bus master */
pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
diff --git a/board/netstal/hcu5/init.S b/board/netstal/hcu5/init.S
index d73c861e668..05b5e389c20 100644
--- a/board/netstal/hcu5/init.S
+++ b/board/netstal/hcu5/init.S
@@ -42,7 +42,7 @@ tlbtab:
/* TLB#0: vxWorks needs this entry for the Machine Check interrupt, */
tlbentry( 0x40000000, SZ_256M, 0, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
/* TLB#1: TLB-entry for DDR SDRAM (Up to 2GB) */
- tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0,
+ tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0,
AC_R|AC_W|AC_X|SA_G|SA_I )
/* TLB#2: TLB-entry for EBC */
@@ -53,7 +53,7 @@ tlbtab:
* off to use the speed up boot process. It is patched after relocation
* to enable SA_I
*/
- tlbentry( CFG_BOOT_BASE_ADDR, SZ_1M, CFG_BOOT_BASE_ADDR, 1,
+ tlbentry( CONFIG_SYS_BOOT_BASE_ADDR, SZ_1M, CONFIG_SYS_BOOT_BASE_ADDR, 1,
AC_R|AC_W|AC_X|SA_G)
/*
@@ -63,13 +63,13 @@ tlbtab:
*/
/* TLB#4: */
- tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 1,
+ tlbentry( CONFIG_SYS_PCI_MEMBASE1, SZ_256M, CONFIG_SYS_PCI_MEMBASE1, 1,
AC_R|AC_W|SA_G|SA_I )
/* TLB#5: */
- tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 1,
+ tlbentry( CONFIG_SYS_PCI_MEMBASE2, SZ_256M, CONFIG_SYS_PCI_MEMBASE2, 1,
AC_R|AC_W|SA_G|SA_I )
/* TLB#6: */
- tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 1,
+ tlbentry( CONFIG_SYS_PCI_MEMBASE3, SZ_256M, CONFIG_SYS_PCI_MEMBASE3, 1,
AC_R|AC_W|SA_G|SA_I )
/* TLB-entry for Internal Registers & OCM */
@@ -87,20 +87,20 @@ tlbtab:
/* CAN */
/* TLB#10: */
- tlbentry( CFG_CS_1, SZ_1K, CFG_CS_1, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+ tlbentry( CONFIG_SYS_CS_1, SZ_1K, CONFIG_SYS_CS_1, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
/* TLB#11: CPLD and IMC-Standard 32 MB */
- tlbentry( CFG_CS_2, SZ_16M, CFG_CS_2, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+ tlbentry( CONFIG_SYS_CS_2, SZ_16M, CONFIG_SYS_CS_2, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
/* TLB#12: */
- tlbentry( CFG_CS_2 + 0x1000000, SZ_16M, CFG_CS_2 + 0x1000000, 1,
+ tlbentry( CONFIG_SYS_CS_2 + 0x1000000, SZ_16M, CONFIG_SYS_CS_2 + 0x1000000, 1,
AC_R|AC_W|AC_X|SA_G|SA_I )
/* IMC-Fast 32 MB */
/* TLB#13: */
- tlbentry( CFG_CS_3, SZ_16M, CFG_CS_3, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+ tlbentry( CONFIG_SYS_CS_3, SZ_16M, CONFIG_SYS_CS_3, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
/* TLB#14: */
- tlbentry( CFG_CS_3 + 0x1000000, SZ_16M, CFG_CS_3, 1,
+ tlbentry( CONFIG_SYS_CS_3 + 0x1000000, SZ_16M, CONFIG_SYS_CS_3, 1,
AC_R|AC_W|AC_X|SA_G|SA_I )
tlbtab_end
diff --git a/board/netstal/hcu5/sdram.c b/board/netstal/hcu5/sdram.c
index e5df62ef7ad..f59bd7d1895 100644
--- a/board/netstal/hcu5/sdram.c
+++ b/board/netstal/hcu5/sdram.c
@@ -263,20 +263,20 @@ phys_size_t initdram (int board_type)
/*
* Program tlb entries for this size (dynamic)
*/
- remove_tlb(CFG_SDRAM_BASE, 256 << 20);
+ remove_tlb(CONFIG_SYS_SDRAM_BASE, 256 << 20);
program_tlb(0, 0, dram_size, TLB_WORD2_W_ENABLE | TLB_WORD2_I_ENABLE);
/*
* Setup 2nd TLB with same physical address but different virtual
* address with cache enabled. This is done for fast ECC generation.
*/
- program_tlb(0, CFG_DDR_CACHED_ADDR, dram_size, 0);
+ program_tlb(0, CONFIG_SYS_DDR_CACHED_ADDR, dram_size, 0);
#ifdef CONFIG_DDR_ECC
/*
* If ECC is enabled, initialize the parity bits.
*/
- program_ecc(CFG_DDR_CACHED_ADDR, dram_size);
+ program_ecc(CONFIG_SYS_DDR_CACHED_ADDR, dram_size);
#endif
return (dram_size);
diff --git a/board/netstal/hcu5/u-boot.lds b/board/netstal/hcu5/u-boot.lds
index c72e5ba6997..f857ef3c0f3 100644
--- a/board/netstal/hcu5/u-boot.lds
+++ b/board/netstal/hcu5/u-boot.lds
@@ -136,7 +136,7 @@ SECTIONS
*(COMMON)
}
- ppcenv_assert = ASSERT(. < 0xFFFFB000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified.");
+ ppcenv_assert = ASSERT(. < 0xFFFFB000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and TEXT_BASE may need to be modified.");
_end = . ;
PROVIDE (end = .);
diff --git a/board/netstal/mcu25/mcu25.c b/board/netstal/mcu25/mcu25.c
index ed171bfeb07..66ed95fb9dd 100644
--- a/board/netstal/mcu25/mcu25.c
+++ b/board/netstal/mcu25/mcu25.c
@@ -74,9 +74,9 @@ int board_early_init_f (void)
mtdcr(cntrl1, CPC0_CR1_VALUE);
mtdcr(ecr, 0x60606000);
mtdcr(CPC0_EIRR, 0x7C000000);
- out32(GPIO0_OR, CFG_GPIO0_OR );
- out32(GPIO0_TCR, CFG_GPIO0_TCR);
- out32(GPIO0_ODR, CFG_GPIO0_ODR);
+ out32(GPIO0_OR, CONFIG_SYS_GPIO0_OR );
+ out32(GPIO0_TCR, CONFIG_SYS_GPIO0_TCR);
+ out32(GPIO0_ODR, CONFIG_SYS_GPIO0_ODR);
mtspr(ccr0, 0x00700000);
return 0;
@@ -141,7 +141,7 @@ u32 hcu_get_slot(void)
*/
u32 get_serial_number(void)
{
- u32 serial = in_be32((u32 *)CFG_FLASH_BASE);
+ u32 serial = in_be32((u32 *)CONFIG_SYS_FLASH_BASE);
if (serial == 0xffffffff)
return 0;
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-06 20:51:03 +0000