diff options
Diffstat (limited to 'board/pm520/flash.c')
| -rw-r--r-- | board/pm520/flash.c | 38 |
1 files changed, 19 insertions, 19 deletions
diff --git a/board/pm520/flash.c b/board/pm520/flash.c index 9ec843e11e4..64c86241579 100644 --- a/board/pm520/flash.c +++ b/board/pm520/flash.c @@ -28,7 +28,7 @@ #include <linux/byteorder/swab.h> -flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ +flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ /* Board support for 1 or 2 flash devices */ #define FLASH_PORT_WIDTH32 @@ -87,11 +87,11 @@ unsigned long flash_init (void) ulong size = 0; extern void flash_preinit(void); extern void flash_afterinit(ulong, ulong); - ulong flashbase = CFG_FLASH_BASE; + ulong flashbase = CONFIG_SYS_FLASH_BASE; flash_preinit(); - for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { + for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { switch (i) { case 0: memset(&flash_info[i], 0, sizeof(flash_info_t)); @@ -110,11 +110,11 @@ unsigned long flash_init (void) /* Protect monitor and environment sectors */ -#if CFG_MONITOR_BASE >= CFG_FLASH_BASE +#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE #ifndef CONFIG_BOOT_ROM flash_protect ( FLAG_PROTECT_SET, - CFG_MONITOR_BASE, - CFG_MONITOR_BASE + monitor_flash_len - 1, + CONFIG_SYS_MONITOR_BASE, + CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0] ); #endif #endif @@ -245,28 +245,28 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info) /* In U-Boot we support only 32 MB (no bank-switching) */ info->sector_count = 256 / 2; info->size = 0x04000000 / 2; - info->start[0] = CFG_FLASH_BASE + 0x02000000; + info->start[0] = CONFIG_SYS_FLASH_BASE + 0x02000000; break; /* => 32 MB */ case (FPW) INTEL_ID_28F128J3A: info->flash_id += FLASH_28F128J3A; info->sector_count = 128; info->size = 0x02000000; - info->start[0] = CFG_FLASH_BASE + 0x02000000; + info->start[0] = CONFIG_SYS_FLASH_BASE + 0x02000000; break; /* => 32 MB */ case (FPW) INTEL_ID_28F640J3A: info->flash_id += FLASH_28F640J3A; info->sector_count = 64; info->size = 0x01000000; - info->start[0] = CFG_FLASH_BASE + 0x03000000; + info->start[0] = CONFIG_SYS_FLASH_BASE + 0x03000000; break; /* => 16 MB */ case (FPW) INTEL_ID_28F320J3A: info->flash_id += FLASH_28F320J3A; info->sector_count = 32; info->size = 0x800000; - info->start[0] = CFG_FLASH_BASE + 0x03800000; + info->start[0] = CONFIG_SYS_FLASH_BASE + 0x03800000; break; /* => 8 MB */ default: @@ -274,10 +274,10 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info) break; } - if (info->sector_count > CFG_MAX_FLASH_SECT) { + if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) { printf ("** ERROR: sector count %d > max (%d) **\n", - info->sector_count, CFG_MAX_FLASH_SECT); - info->sector_count = CFG_MAX_FLASH_SECT; + info->sector_count, CONFIG_SYS_MAX_FLASH_SECT); + info->sector_count = CONFIG_SYS_MAX_FLASH_SECT; } addr[0] = (FPW) 0x00FF00FF; /* restore read mode */ @@ -328,7 +328,7 @@ static unsigned char intel_sector_protected (flash_info_t *info, ushort sector) /* * first, wait for the WSM to be finished. The rationale for * waiting for the WSM to become idle for at most - * CFG_FLASH_ERASE_TOUT is as follows. The WSM can be busy + * CONFIG_SYS_FLASH_ERASE_TOUT is as follows. The WSM can be busy * because of: (1) erase, (2) program or (3) lock bit * configuration. So we just wait for the longest timeout of * the (1)-(3), i.e. the erase timeout. @@ -341,7 +341,7 @@ static unsigned char intel_sector_protected (flash_info_t *info, ushort sector) start = get_timer (0); while ((*addr & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) { - if (get_timer (start) > CFG_FLASH_ERASE_TOUT) { + if (get_timer (start) > CONFIG_SYS_FLASH_ERASE_TOUT) { *addr = (FPW) INTEL_RESET; /* restore read mode */ printf("WSM busy too long, can't get prot status\n"); return 1; @@ -425,7 +425,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) *addr = (FPW) 0x00D000D0; /* erase confirm */ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer(start) > CFG_FLASH_ERASE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { printf ("Timeout\n"); *addr = (FPW) 0x00B000B0; /* suspend erase */ *addr = (FPW) 0x00FF00FF; /* reset to read mode */ @@ -560,7 +560,7 @@ static int write_data (flash_info_t *info, ulong dest, FPW data) /* wait while polling the status register */ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { *addr = (FPW) 0x00FF00FF; /* restore read mode */ return (1); } @@ -606,7 +606,7 @@ int flash_real_protect (flash_info_t *info, long sector, int prot) start = get_timer(0); while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) { - if (get_timer(start) > CFG_FLASH_UNLOCK_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_UNLOCK_TOUT) { printf("Flash lock bit operation timed out\n"); rc = 1; break; @@ -643,7 +643,7 @@ int flash_real_protect (flash_info_t *info, long sector, int prot) *addr = INTEL_PROTECT; /* set */ while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) { - if (get_timer(start) > CFG_FLASH_UNLOCK_TOUT) + if (get_timer(start) > CONFIG_SYS_FLASH_UNLOCK_TOUT) { printf("Flash lock bit operation timed out\n"); rc = 1; |