diff options
Diffstat (limited to 'board/spc1920/spc1920.c')
| -rw-r--r-- | board/spc1920/spc1920.c | 36 |
1 files changed, 18 insertions, 18 deletions
diff --git a/board/spc1920/spc1920.c b/board/spc1920/spc1920.c index a32aad0ee43..ee939bf2414 100644 --- a/board/spc1920/spc1920.c +++ b/board/spc1920/spc1920.c @@ -84,9 +84,9 @@ const uint sdram_table[] = { phys_size_t initdram (int board_type) { - volatile immap_t *immr = (immap_t *) CFG_IMMR; + volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &immr->im_memctl; - /* volatile spc1920_pld_t *pld = (spc1920_pld_t *) CFG_SPC1920_PLD_BASE; */ + /* volatile spc1920_pld_t *pld = (spc1920_pld_t *) CONFIG_SYS_SPC1920_PLD_BASE; */ long int size_b0; long int size8, size9; @@ -99,19 +99,19 @@ phys_size_t initdram (int board_type) udelay(100); - memctl->memc_mptpr = CFG_MPTPR; + memctl->memc_mptpr = CONFIG_SYS_MPTPR; /* burst length=4, burst type=sequential, CAS latency=2 */ - memctl->memc_mar = CFG_MAR; + memctl->memc_mar = CONFIG_SYS_MAR; /* * Map controller bank 1 to the SDRAM bank at preliminary address. */ - memctl->memc_or1 = CFG_OR1_PRELIM; - memctl->memc_br1 = CFG_BR1_PRELIM; + memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM; + memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM; /* initialize memory address register */ - memctl->memc_mbmr = CFG_MBMR_8COL; /* refresh not enabled yet */ + memctl->memc_mbmr = CONFIG_SYS_MBMR_8COL; /* refresh not enabled yet */ /* mode initialization (offset 5) */ udelay (200); /* 0x80006105 */ @@ -132,7 +132,7 @@ phys_size_t initdram (int board_type) /* Need at least 10 DRAM accesses to stabilize */ for (i = 0; i < 10; ++i) { volatile unsigned long *addr = - (volatile unsigned long *) CFG_SDRAM_BASE; + (volatile unsigned long *) CONFIG_SYS_SDRAM_BASE; unsigned long val; val = *(addr + i); @@ -144,22 +144,22 @@ phys_size_t initdram (int board_type) * * try 8 column mode */ - size8 = dram_size (CFG_MBMR_8COL, (long *)CFG_SDRAM_BASE, SDRAM_MAX_SIZE); + size8 = dram_size (CONFIG_SYS_MBMR_8COL, (long *)CONFIG_SYS_SDRAM_BASE, SDRAM_MAX_SIZE); udelay (1000); /* * try 9 column mode */ - size9 = dram_size (CFG_MBMR_9COL, (long *)CFG_SDRAM_BASE, SDRAM_MAX_SIZE); + size9 = dram_size (CONFIG_SYS_MBMR_9COL, (long *)CONFIG_SYS_SDRAM_BASE, SDRAM_MAX_SIZE); if (size8 < size9) { /* leave configuration at 9 columns */ size_b0 = size9; - memctl->memc_mbmr = CFG_MBMR_9COL | MBMR_PTBE; + memctl->memc_mbmr = CONFIG_SYS_MBMR_9COL | MBMR_PTBE; udelay (500); } else { /* back to 8 columns */ size_b0 = size8; - memctl->memc_mbmr = CFG_MBMR_8COL | MBMR_PTBE; + memctl->memc_mbmr = CONFIG_SYS_MBMR_8COL | MBMR_PTBE; udelay (500); } @@ -169,15 +169,15 @@ phys_size_t initdram (int board_type) memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) | OR_CSNT_SAM | OR_G5LS | SDRAM_TIMING; - memctl->memc_br1 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMB | BR_V; + memctl->memc_br1 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMB | BR_V; udelay (1000); /* initalize the DSP Host Port Interface */ hpi_init(); /* FRAM Setup */ - memctl->memc_or4 = CFG_OR4; - memctl->memc_br4 = CFG_BR4; + memctl->memc_or4 = CONFIG_SYS_OR4; + memctl->memc_br4 = CONFIG_SYS_BR4; udelay(1000); return (size_b0); @@ -193,7 +193,7 @@ phys_size_t initdram (int board_type) static long int dram_size (long int mbmr_value, long int *base, long int maxsize) { - volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; memctl->memc_mbmr = mbmr_value; @@ -207,7 +207,7 @@ static long int dram_size (long int mbmr_value, long int *base, int board_early_init_f(void) { - volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; /* Set Go/NoGo led (PA15) to color red */ immap->im_ioport.iop_papar &= ~0x1; @@ -240,7 +240,7 @@ int board_early_init_f(void) immap->im_ioport.iop_pddat |= 0x0020; -#ifdef CFG_SMC1_PLD_CLK4 /* SMC1 uses CLK4 from PLD */ +#ifdef CONFIG_SYS_SMC1_PLD_CLK4 /* SMC1 uses CLK4 from PLD */ immap->im_cpm.cp_simode |= 0x7000; immap->im_cpm.cp_simode &= ~(0x8000); #endif |