diff options
Diffstat (limited to 'board/spear/x600/x600.c')
| -rw-r--r-- | board/spear/x600/x600.c | 25 |
1 files changed, 13 insertions, 12 deletions
diff --git a/board/spear/x600/x600.c b/board/spear/x600/x600.c index 044d2049ef8..b8edfcd071f 100644 --- a/board/spear/x600/x600.c +++ b/board/spear/x600/x600.c @@ -67,31 +67,32 @@ void board_nand_init(void) fsmc_nand_init(nand); } -int designware_board_phy_init(struct eth_device *dev, int phy_addr, - int (*mii_write)(struct eth_device *, u8, u8, u16), - int dw_reset_phy(struct eth_device *)) +int board_phy_config(struct phy_device *phydev) { /* Extended PHY control 1, select GMII */ - mii_write(dev, phy_addr, 23, 0x0020); + phy_write(phydev, MDIO_DEVAD_NONE, 23, 0x0020); /* Software reset necessary after GMII mode selction */ - dw_reset_phy(dev); + phy_reset(phydev); /* Enable extended page register access */ - mii_write(dev, phy_addr, 31, 0x0001); + phy_write(phydev, MDIO_DEVAD_NONE, 31, 0x0001); /* 17e: Enhanced LED behavior, needs to be written twice */ - mii_write(dev, phy_addr, 17, 0x09ff); - mii_write(dev, phy_addr, 17, 0x09ff); + phy_write(phydev, MDIO_DEVAD_NONE, 17, 0x09ff); + phy_write(phydev, MDIO_DEVAD_NONE, 17, 0x09ff); /* 16e: Enhanced LED method select */ - mii_write(dev, phy_addr, 16, 0xe0ea); + phy_write(phydev, MDIO_DEVAD_NONE, 16, 0xe0ea); /* Disable extended page register access */ - mii_write(dev, phy_addr, 31, 0x0000); + phy_write(phydev, MDIO_DEVAD_NONE, 31, 0x0000); /* Enable clock output pin */ - mii_write(dev, phy_addr, 18, 0x0049); + phy_write(phydev, MDIO_DEVAD_NONE, 18, 0x0049); + + if (phydev->drv->config) + phydev->drv->config(phydev); return 0; } @@ -100,7 +101,7 @@ int board_eth_init(bd_t *bis) { int ret = 0; - if (designware_initialize(0, CONFIG_SPEAR_ETHBASE, CONFIG_PHY_ADDR, + if (designware_initialize(CONFIG_SPEAR_ETHBASE, PHY_INTERFACE_MODE_GMII) >= 0) ret++; |