diff options
Diffstat (limited to 'board/theobroma-systems/puma_rk3399/README')
| -rw-r--r-- | board/theobroma-systems/puma_rk3399/README | 90 |
1 files changed, 1 insertions, 89 deletions
diff --git a/board/theobroma-systems/puma_rk3399/README b/board/theobroma-systems/puma_rk3399/README index 649aa3c543d..39c9d618866 100644 --- a/board/theobroma-systems/puma_rk3399/README +++ b/board/theobroma-systems/puma_rk3399/README @@ -1,89 +1 @@ -Introduction -============ - -The RK3399-Q7 (Puma) is a system-on-module featuring the Rockchip -RK3399 in a Qseven-compatible form-factor. - -RK3399-Q7 features: - * CPU: ARMv8 64bit Big-Little architecture, - * Big: dual-core Cortex-A72 - * Little: quad-core Cortex-A53 - * IRAM: 200KB - * DRAM: 4GB-128MB dual-channel - * eMMC: onboard eMMC - * SD/MMC - * GbE (onboard Micrel KSZ9031) Gigabit ethernet PHY - * USB: - * USB3.0 dual role port - * 2x USB3.0 host, 1x USB2.0 host via onboard USB3.0 hub - * Display: HDMI/eDP/MIPI - * Camera: 2x CSI (one on the edge connector, one on the Q7 specified CSI ZIF) - * NOR Flash: onboard SPI NOR - * Companion Controller: onboard additional Cortex-M0 microcontroller - * RTC - * fan controller - * CAN - -Here is the step-by-step to boot to U-Boot on rk3399. - -Get the Source and build ATF binary -=================================== - - > git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git - -Compile the ATF -=============== - - > cd trusted-firmware-a - > make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399 bl31 - > cp build/rk3399/release/bl31/bl31.elf ../u-boot/bl31.elf - -Compile the U-Boot -================== - - > cd ../u-boot - > make CROSS_COMPILE=aarch64-linux-gnu- puma-rk3399_defconfig all - -Flash the image -=============== - -Copy u-boot-rockchip.bin to offset 32k for SD/eMMC. -Copy u-boot-rockchip-spi.bin to offset 0 for NOR-flash. - -SD-Card -------- - - > dd if=u-boot-rockchip.bin of=/dev/sdb seek=64 - -eMMC ----- - -rkdeveloptool allows to flash the on-board eMMC via the USB OTG interface with -help of the Rockchip loader binary. - - > git clone https://github.com/rockchip-linux/rkdeveloptool - > cd rkdeveloptool - > autoreconf -i && ./configure && make - > git clone https://github.com/rockchip-linux/rkbin.git - > cd rkbin - > ./tools/boot_merger RKBOOT/RK3399MINIALL.ini - > cd .. - > ./rkdeveloptool db rkbin/rk3399_loader_v1.25.126.bin - > ./rkdeveloptool wl 64 ../u-boot-rockchip.bin - -NOR-Flash ---------- - -rkdeveloptool allows to flash the on-board SPI via the USB OTG interface with -help of the Rockchip loader binary. - - > git clone https://github.com/rockchip-linux/rkdeveloptool - > cd rkdeveloptool - > autoreconf -i && ./configure && make - > git clone https://github.com/rockchip-linux/rkbin.git - > cd rkbin - > ./tools/boot_merger RKBOOT/RK3399MINIALL_SPINOR.ini - > cd .. - > ./rkdeveloptool db rkbin/rk3399_loader_spinor_v1.25.114.bin - > ./rkdeveloptool ef - > ./rkdeveloptool wl 0 ../u-boot-rockchip-spi.bin +See doc/board/theobroma-systems/puma_rk3399.rst. |