1 files changed, 0 insertions, 155 deletions
diff --git a/board/toradex/apalis-imx8x/apalis-imx8x.c b/board/toradex/apalis-imx8x/apalis-imx8x.c
deleted file mode 100644
index ac3bac66a96..00000000000
--- a/board/toradex/apalis-imx8x/apalis-imx8x.c
+++ /dev/null
@@ -1,155 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2020 Toradex
- */
-
-#include <common.h>
-#include <cpu_func.h>
-#include <init.h>
-
-#include <asm/arch/clock.h>
-#include <asm/arch/imx8-pins.h>
-#include <asm/arch/iomux.h>
-#include <asm/arch/sci/sci.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/global_data.h>
-#include <asm/gpio.h>
-#include <asm/io.h>
-#include <env.h>
-#include <errno.h>
-#include <linux/libfdt.h>
-
-#include "../common/tdx-cfg-block.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define UART_PAD_CTRL	((SC_PAD_CONFIG_OUT_IN << PADRING_CONFIG_SHIFT) | \
-			 (SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) | \
-			 (SC_PAD_28FDSOI_DSE_DV_HIGH << PADRING_DSE_SHIFT) | \
-			 (SC_PAD_28FDSOI_PS_PU << PADRING_PULL_SHIFT))
-
-static iomux_cfg_t uart1_pads[] = {
-	SC_P_UART1_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
-	SC_P_UART1_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
-};
-
-static void setup_iomux_uart(void)
-{
-	imx8_iomux_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
-}
-
-void board_mem_get_layout(u64 *phys_sdram_1_start,
-			  u64 *phys_sdram_1_size,
-			  u64 *phys_sdram_2_start,
-			  u64 *phys_sdram_2_size)
-{
-	u32 is_dualx = 0, val = 0;
-	sc_err_t scierr = sc_misc_otp_fuse_read(-1, 6, &val);
-
-	if (scierr == SC_ERR_NONE) {
-		/* DX has two A35 cores disabled */
-		is_dualx = (val & 0xf) != 0x0;
-	}
-
-	*phys_sdram_1_start = PHYS_SDRAM_1;
-	if (is_dualx)
-		/* Our DX based SKUs only have 1 GB RAM */
-		*phys_sdram_1_size = SZ_1G;
-	else
-		*phys_sdram_1_size = PHYS_SDRAM_1_SIZE;
-	*phys_sdram_2_start = PHYS_SDRAM_2;
-	*phys_sdram_2_size = PHYS_SDRAM_2_SIZE;
-}
-
-int board_early_init_f(void)
-{
-	sc_pm_clock_rate_t rate;
-	sc_err_t err = 0;
-
-	/*
-	 * This works around that having only UART3 up the baudrate is 1.2M
-	 * instead of 115.2k. Set UART0 clock root to 80 MHz
-	 */
-	rate = 80000000;
-	err = sc_pm_set_clock_rate(-1, SC_R_UART_0, SC_PM_CLK_PER, &rate);
-	if (err != SC_ERR_NONE)
-		return 0;
-
-	/* Set UART3 clock root to 80 MHz and enable it */
-	rate = SC_80MHZ;
-	err = sc_pm_setup_uart(SC_R_UART_1, rate);
-	if (err != SC_ERR_NONE)
-		return 0;
-
-	setup_iomux_uart();
-
-	return 0;
-}
-
-#if IS_ENABLED(CONFIG_DM_GPIO)
-static void board_gpio_init(void)
-{
-	/* TODO */
-}
-#else
-static inline void board_gpio_init(void) {}
-#endif
-
-#if IS_ENABLED(CONFIG_FEC_MXC)
-#include <miiphy.h>
-
-int board_phy_config(struct phy_device *phydev)
-{
-	if (phydev->drv->config)
-		phydev->drv->config(phydev);
-
-	return 0;
-}
-#endif
-
-int checkboard(void)
-{
-	puts("Model: Toradex Apalis iMX8X\n");
-
-	build_info();
-	print_bootinfo();
-
-	return 0;
-}
-
-int board_init(void)
-{
-	board_gpio_init();
-
-	return 0;
-}
-
-/*
- * Board specific reset that is system reset.
- */
-void reset_cpu(void)
-{
-	/* TODO */
-}
-
-#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-int ft_board_setup(void *blob, struct bd_info *bd)
-{
-	return ft_common_board_setup(blob, bd);
-}
-#endif
-
-int board_mmc_get_env_dev(int devno)
-{
-	return devno;
-}
-
-int board_late_init(void)
-{
-#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-/* TODO move to common */
-	env_set("board_name", "Apalis iMX8X");
-#endif
-
-	return 0;
-}