summaryrefslogtreecommitdiff
path: root/board/tqc/tqm85xx/tlb.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/tqc/tqm85xx/tlb.c')
-rw-r--r--board/tqc/tqm85xx/tlb.c47
1 files changed, 0 insertions, 47 deletions
diff --git a/board/tqc/tqm85xx/tlb.c b/board/tqc/tqm85xx/tlb.c
index 75dd348aa52..f9f8cc9a01e 100644
--- a/board/tqc/tqm85xx/tlb.c
+++ b/board/tqc/tqm85xx/tlb.c
@@ -120,36 +120,6 @@ struct fsl_e_tlb_entry tlb_table[] = {
SET_TLB_ENTRY (1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
0, 6, BOOKE_PAGESZ_64M, 1),
-
-#if defined(CONFIG_TQM8548_AG) || defined (CONFIG_TQM8548_BE)
- /*
- * TLB 7+8: 2G DDR, cache enabled
- * 0x00000000 2G DDR System memory
- * Without SPD EEPROM configured DDR, this must be setup manually.
- */
- SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
- MAS3_SX | MAS3_SW | MAS3_SR, 0,
- 0, 7, BOOKE_PAGESZ_1G, 1),
-
- SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
- CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
- MAS3_SX | MAS3_SW | MAS3_SR, 0,
- 0, 8, BOOKE_PAGESZ_1G, 1),
-#else
- /*
- * TLB 7+8: 512M DDR, cache disabled (needed for memory test)
- * 0x00000000 512M DDR System memory
- * Without SPD EEPROM configured DDR, this must be setup manually.
- */
- SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
- MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
- 0, 7, BOOKE_PAGESZ_256M, 1),
-
- SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
- CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
- MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
- 0, 8, BOOKE_PAGESZ_256M, 1),
-#endif
#ifdef CONFIG_PCIE1
/*
* TLB 9: 16M Non-cacheable, guarded
@@ -228,23 +198,6 @@ struct fsl_e_tlb_entry tlb_table[] = {
SET_TLB_ENTRY (1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
0, 7, BOOKE_PAGESZ_64M, 1),
-
- /*
- * TLB 8+9: 512M DDR, cache disabled (needed for memory test)
- * 0x00000000 512M DDR System memory
- * Without SPD EEPROM configured DDR, this must be setup manually.
- * Make sure the TLB count at the top of this table is correct.
- * Likely it needs to be increased by two for these entries.
- */
- SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
- MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
- 0, 8, BOOKE_PAGESZ_256M, 1),
-
- SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
- CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
- MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
- 0, 9, BOOKE_PAGESZ_256M, 1),
-
#ifdef CONFIG_PCIE1
/*
* TLB 10: 16M Non-cacheable, guarded