diff options
Diffstat (limited to 'board/warp7/warp7.c')
| -rw-r--r-- | board/warp7/warp7.c | 85 |
1 files changed, 11 insertions, 74 deletions
diff --git a/board/warp7/warp7.c b/board/warp7/warp7.c index 3d32b3eb52b..6ebeb08e331 100644 --- a/board/warp7/warp7.c +++ b/board/warp7/warp7.c @@ -30,28 +30,6 @@ DECLARE_GLOBAL_DATA_PTR; #define UART_PAD_CTRL (PAD_CTL_DSE_3P3V_49OHM | PAD_CTL_PUS_PU100KOHM | \ PAD_CTL_HYS) -#define USDHC_PAD_CTRL (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \ - PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PUS_PU47KOHM) - -#define I2C_PAD_CTRL (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \ - PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PUS_PU100KOHM) - -#ifdef CONFIG_SYS_I2C_MXC -#define PC MUX_PAD_CTRL(I2C_PAD_CTRL) -/* I2C1 for PMIC */ -static struct i2c_pads_info i2c_pad_info1 = { - .scl = { - .i2c_mode = MX7D_PAD_I2C1_SCL__I2C1_SCL | PC, - .gpio_mode = MX7D_PAD_I2C1_SCL__GPIO4_IO8 | PC, - .gp = IMX_GPIO_NR(4, 8), - }, - .sda = { - .i2c_mode = MX7D_PAD_I2C1_SDA__I2C1_SDA | PC, - .gpio_mode = MX7D_PAD_I2C1_SDA__GPIO4_IO9 | PC, - .gp = IMX_GPIO_NR(4, 9), - }, -}; -#endif int dram_init(void) { @@ -74,43 +52,11 @@ static iomux_v3_cfg_t const uart1_pads[] = { MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL), }; -static iomux_v3_cfg_t const usdhc3_pads[] = { - MX7D_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX7D_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX7D_PAD_SD3_DATA0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX7D_PAD_SD3_DATA1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX7D_PAD_SD3_DATA2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX7D_PAD_SD3_DATA3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX7D_PAD_SD3_DATA4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX7D_PAD_SD3_DATA5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX7D_PAD_SD3_DATA6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX7D_PAD_SD3_DATA7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX7D_PAD_SD3_RESET_B__SD3_RESET_B | MUX_PAD_CTRL(USDHC_PAD_CTRL), -}; - static void setup_iomux_uart(void) { imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); }; -static struct fsl_esdhc_cfg usdhc_cfg[1] = { - {USDHC3_BASE_ADDR}, -}; - -int board_mmc_getcd(struct mmc *mmc) -{ - /* Assume uSDHC3 emmc is always present */ - return 1; -} - -int board_mmc_init(bd_t *bis) -{ - imx_iomux_v3_setup_multiple_pads(usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); - usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); - - return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); -} - int board_early_init_f(void) { setup_iomux_uart(); @@ -118,29 +64,24 @@ int board_early_init_f(void) return 0; } -#ifdef CONFIG_POWER -#define I2C_PMIC 0 -static struct pmic *pfuze; +#ifdef CONFIG_DM_PMIC int power_init_board(void) { - int ret; - unsigned int reg, rev_id; - - ret = power_pfuze3000_init(I2C_PMIC); - if (ret) - return ret; + struct udevice *dev; + int ret, dev_id, rev_id; - pfuze = pmic_get("PFUZE3000"); - ret = pmic_probe(pfuze); - if (ret) + ret = pmic_get("pfuze3000", &dev); + if (ret == -ENODEV) + return 0; + if (ret != 0) return ret; - pmic_reg_read(pfuze, PFUZE3000_DEVICEID, ®); - pmic_reg_read(pfuze, PFUZE3000_REVID, &rev_id); - printf("PMIC: PFUZE3000 DEV_ID=0x%x REV_ID=0x%x\n", reg, rev_id); + dev_id = pmic_reg_read(dev, PFUZE3000_DEVICEID); + rev_id = pmic_reg_read(dev, PFUZE3000_REVID); + printf("PMIC: PFUZE3000 DEV_ID=0x%x REV_ID=0x%x\n", dev_id, rev_id); /* disable Low Power Mode during standby mode */ - pmic_reg_write(pfuze, PFUZE3000_LDOGCTL, 0x1); + pmic_clrsetbits(dev, PFUZE3000_LDOGCTL, 0, 1); return 0; } @@ -164,10 +105,6 @@ int board_init(void) /* address of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; - #ifdef CONFIG_SYS_I2C_MXC - setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1); - #endif - return 0; } |