4 files changed, 4 insertions, 70 deletions
diff --git a/board/xes/xpedite517x/ddr.c b/board/xes/xpedite517x/ddr.c
index 981bf41e096..3a6e297f457 100644
--- a/board/xes/xpedite517x/ddr.c
+++ b/board/xes/xpedite517x/ddr.c
@@ -26,35 +26,12 @@
 #include <asm/fsl_ddr_sdram.h>
 #include <asm/fsl_ddr_dimm_params.h>
 
-static void get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
+void get_spd(ddr2_spd_eeprom_t *spd, u8 i2c_address)
 {
 	i2c_read(i2c_address, SPD_EEPROM_OFFSET, 2, (uchar *)spd,
 		sizeof(ddr2_spd_eeprom_t));
 }
 
-void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd,
-			unsigned int ctrl_num)
-{
-	unsigned int i;
-	unsigned int i2c_address = 0;
-
-	for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) {
-		if (ctrl_num == 0) {
-			i2c_address = SPD_EEPROM_ADDRESS1;
-#ifdef SPD_EEPROM_ADDRESS2
-		} else if (ctrl_num == 1) {
-			i2c_address = SPD_EEPROM_ADDRESS2;
-#endif
-		} else {
-			/* An inalid ctrl number was give, use default SPD */
-			printf("ERROR: invalid DDR ctrl: %d\n", ctrl_num);
-			i2c_address = SPD_EEPROM_ADDRESS1;
-		}
-
-		get_spd(&(ctrl_dimms_spd[i]), i2c_address);
-	}
-}
-
 /*
  * There are four board-specific SDRAM timing parameters which must be
  * calculated based on the particular PCB artwork.  These are:
diff --git a/board/xes/xpedite520x/ddr.c b/board/xes/xpedite520x/ddr.c
index f8d945ace3f..3671cb8af9a 100644
--- a/board/xes/xpedite520x/ddr.c
+++ b/board/xes/xpedite520x/ddr.c
@@ -12,8 +12,7 @@
 #include <asm/fsl_ddr_sdram.h>
 #include <asm/fsl_ddr_dimm_params.h>
 
-static void
-get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
+void get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
 {
 	i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr2_spd_eeprom_t));
 
@@ -27,20 +26,6 @@ get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
 	}
 }
 
-void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd,
-			unsigned int ctrl_num)
-{
-	unsigned int i;
-
-	if (ctrl_num) {
-		printf("%s: invalid ctrl_num = %d\n", __func__, ctrl_num);
-		return;
-	}
-
-	for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++)
-		get_spd(&(ctrl_dimms_spd[i]), SPD_EEPROM_ADDRESS);
-}
-
 void fsl_ddr_board_options(memctl_options_t *popts,
 				dimm_params_t *pdimm,
 				unsigned int ctrl_num)
diff --git a/board/xes/xpedite537x/ddr.c b/board/xes/xpedite537x/ddr.c
index 307f875db9b..d0662b0c57d 100644
--- a/board/xes/xpedite537x/ddr.c
+++ b/board/xes/xpedite537x/ddr.c
@@ -27,27 +27,12 @@
 #include <asm/fsl_ddr_sdram.h>
 #include <asm/fsl_ddr_dimm_params.h>
 
-static void get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
+void get_spd(ddr2_spd_eeprom_t *spd, u8 i2c_address)
 {
 	i2c_read(i2c_address, SPD_EEPROM_OFFSET, 2, (uchar *)spd,
 		 sizeof(ddr2_spd_eeprom_t));
 }
 
-void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd,
-		      unsigned int ctrl_num)
-{
-	unsigned int i;
-	unsigned int i2c_address = 0;
-
-	for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) {
-		if (ctrl_num == 0)
-			i2c_address = SPD_EEPROM_ADDRESS1;
-		if (ctrl_num == 1)
-			i2c_address = SPD_EEPROM_ADDRESS2;
-		get_spd(&(ctrl_dimms_spd[i]), i2c_address);
-	}
-}
-
 /*
  * There are four board-specific SDRAM timing parameters which must be
  * calculated based on the particular PCB artwork.  These are:
diff --git a/board/xes/xpedite550x/ddr.c b/board/xes/xpedite550x/ddr.c
index 9e6964960c3..3b6e08bfcdd 100644
--- a/board/xes/xpedite550x/ddr.c
+++ b/board/xes/xpedite550x/ddr.c
@@ -27,25 +27,12 @@
 #include <asm/fsl_ddr_sdram.h>
 #include <asm/fsl_ddr_dimm_params.h>
 
-static void get_spd(ddr3_spd_eeprom_t *spd, unsigned char i2c_address)
+void get_spd(ddr3_spd_eeprom_t *spd, u8 i2c_address)
 {
 	i2c_read(i2c_address, SPD_EEPROM_OFFSET, 2, (uchar *)spd,
 		 sizeof(ddr3_spd_eeprom_t));
 }
 
-void fsl_ddr_get_spd(ddr3_spd_eeprom_t *ctrl_dimms_spd,
-		      unsigned int ctrl_num)
-{
-	unsigned int i;
-	unsigned int i2c_address = 0;
-
-	for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) {
-		if (ctrl_num == 0 && i == 0)
-			i2c_address = SPD_EEPROM_ADDRESS1;
-		get_spd(&(ctrl_dimms_spd[i]), i2c_address);
-	}
-}
-
 /*
  *     There are traditionally three board-specific SDRAM timing parameters
  *     which must be calculated based on the particular PCB artwork.  These are: