4 files changed, 18 insertions, 99 deletions
diff --git a/board/xilinx/versal-net/Kconfig b/board/xilinx/versal-net/Kconfig
deleted file mode 100644
index 2484429d3cb..00000000000
--- a/board/xilinx/versal-net/Kconfig
+++ /dev/null
@@ -1,17 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Copyright (C) 2020 - 2022, Xilinx, Inc.
-# Copyright (C) 2022, Advanced Micro Devices, Inc.
-#
-
-if ARCH_VERSAL_NET
-
-config CMD_VERSAL_NET
-	bool "Enable Versal NET specific commands"
-	default y
-	depends on ZYNQMP_FIRMWARE
-	help
-	  Select this to enable Versal NET specific commands.
-	  Commands like versalnet loadpdi are enabled by this.
-
-endif
diff --git a/board/xilinx/versal-net/Makefile b/board/xilinx/versal-net/Makefile
index f9ff07c11c6..2008d4e231c 100644
--- a/board/xilinx/versal-net/Makefile
+++ b/board/xilinx/versal-net/Makefile
@@ -7,4 +7,3 @@
 #
 
 obj-y	:= board.o
-obj-$(CONFIG_CMD_VERSAL_NET)	+= cmds.o
diff --git a/board/xilinx/versal-net/board.c b/board/xilinx/versal-net/board.c
index 4d5913cff1d..65b2a451ad7 100644
--- a/board/xilinx/versal-net/board.c
+++ b/board/xilinx/versal-net/board.c
@@ -21,6 +21,8 @@
 #include <asm/arch/sys_proto.h>
 #include <dm/device.h>
 #include <dm/uclass.h>
+#include <zynqmp_firmware.h>
+#include <versalpl.h>
 #include "../common/board.h"
 
 #include <linux/bitfield.h>
@@ -29,10 +31,21 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#if defined(CONFIG_FPGA_VERSALPL)
+static xilinx_desc versalpl = {
+	xilinx_versal_net, csu_dma, 1, &versal_op, 0, &versal_op, NULL,
+	FPGA_LEGACY
+};
+#endif
+
 int board_init(void)
 {
 	printf("EL Level:\tEL%d\n", current_el());
 
+#if defined(CONFIG_FPGA_VERSALPL)
+	fpga_init();
+	fpga_add(fpga_xilinx, &versalpl);
+#endif
 	return 0;
 }
 
@@ -184,7 +197,11 @@ static u8 versal_net_get_bootmode(void)
 	u8 bootmode;
 	u32 reg = 0;
 
-	reg = readl(&crp_base->boot_mode_usr);
+	if (IS_ENABLED(CONFIG_ZYNQMP_FIRMWARE) && current_el() != 3) {
+		reg = zynqmp_pm_get_bootmode_reg();
+	} else {
+		reg = readl(&crp_base->boot_mode_usr);
+	}
 
 	if (reg >> BOOT_MODE_ALT_SHIFT)
 		reg >>= BOOT_MODE_ALT_SHIFT;
diff --git a/board/xilinx/versal-net/cmds.c b/board/xilinx/versal-net/cmds.c
deleted file mode 100644
index e8b669f0fd4..00000000000
--- a/board/xilinx/versal-net/cmds.c
+++ /dev/null
@@ -1,80 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2023, Advanced Micro Devices, Inc.
- *
- * Michal Simek <michal.simek@amd.com>
- */
-
-#include <cpu_func.h>
-#include <command.h>
-#include <log.h>
-#include <memalign.h>
-#include <versalpl.h>
-#include <vsprintf.h>
-#include <zynqmp_firmware.h>
-
-/**
- * do_versalnet_load_pdi - Handle the "versalnet load pdi" command-line command
- * @cmdtp:      Command data struct pointer
- * @flag:       Command flag
- * @argc:       Command-line argument count
- * @argv:       Array of command-line arguments
- *
- * Processes the Versal NET load pdi command
- *
- * Return: return 0 on success, Error value if command fails.
- * CMD_RET_USAGE incase of incorrect/missing parameters.
- */
-static int do_versalnet_load_pdi(struct cmd_tbl *cmdtp, int flag, int argc,
-				 char * const argv[])
-{
-	u32 buf_lo, buf_hi;
-	u32 ret_payload[PAYLOAD_ARG_CNT];
-	ulong addr, *pdi_buf;
-	size_t len;
-	int ret;
-
-	if (argc != cmdtp->maxargs) {
-		debug("pdi_load: incorrect parameters passed\n");
-		return CMD_RET_USAGE;
-	}
-
-	addr = simple_strtol(argv[1], NULL, 16);
-	if (!addr) {
-		debug("pdi_load: zero pdi_data address\n");
-		return CMD_RET_USAGE;
-	}
-
-	len = hextoul(argv[2], NULL);
-	if (!len) {
-		debug("pdi_load: zero size\n");
-		return CMD_RET_USAGE;
-	}
-
-	pdi_buf = (ulong *)ALIGN((ulong)addr, ARCH_DMA_MINALIGN);
-	if ((ulong)addr != (ulong)pdi_buf) {
-		memcpy((void *)pdi_buf, (void *)addr, len);
-		debug("Pdi addr:0x%lx aligned to 0x%lx\n",
-		      addr, (ulong)pdi_buf);
-	}
-
-	flush_dcache_range((ulong)pdi_buf, (ulong)pdi_buf + len);
-
-	buf_lo = lower_32_bits((ulong)pdi_buf);
-	buf_hi = upper_32_bits((ulong)pdi_buf);
-
-	ret = xilinx_pm_request(VERSAL_PM_LOAD_PDI, VERSAL_PM_PDI_TYPE, buf_lo,
-				buf_hi, 0, ret_payload);
-	if (ret)
-		printf("PDI load failed with err: 0x%08x\n", ret);
-
-	return cmd_process_error(cmdtp, ret);
-}
-
-U_BOOT_LONGHELP(versalnet,
-	"loadpdi addr len - Load pdi image\n"
-	"load pdi image at ddr address 'addr' with pdi image size 'len'\n");
-
-U_BOOT_CMD_WITH_SUBCMDS(versalnet, "Versal NET sub-system", versalnet_help_text,
-			U_BOOT_SUBCMD_MKENT(loadpdi, 3, 1,
-					    do_versalnet_load_pdi));